On 17 October 2016 at 21:04, Bhupesh Sharma bhupesh.sharma@freescale.com wrote:
From: Sakar Arora sakar.arora@nxp.com
This patch adds a DXE driver for the I2C controller present on LS1043A SoC.
This DXE driver uses the I2C library to implement various functionalities required by the I2C master protocol.
Signed-off-by: Meenakshi Aggarwal meenakshi.aggarwal@nxp.com Signed-off-by: Bhupesh Sharma bhupesh.sharma@nxp.com
Chips/Nxp/QoriqLs/I2c/I2cDxe.c | 156 +++++++++++++++++++++++++++++++++++++++ Chips/Nxp/QoriqLs/I2c/I2cDxe.inf | 52 +++++++++++++ 2 files changed, 208 insertions(+) create mode 100644 Chips/Nxp/QoriqLs/I2c/I2cDxe.c create mode 100644 Chips/Nxp/QoriqLs/I2c/I2cDxe.inf
diff --git a/Chips/Nxp/QoriqLs/I2c/I2cDxe.c b/Chips/Nxp/QoriqLs/I2c/I2cDxe.c new file mode 100644 index 0000000..982c43d --- /dev/null +++ b/Chips/Nxp/QoriqLs/I2c/I2cDxe.c @@ -0,0 +1,156 @@ +/** I2c.c
- I2c driver APIs for read, write, initialize, set speed and reset
- Copyright (c) 2016, Freescale Semiconductor, Inc. All rights reserved.
- This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+**/ +#include <Library/UefiBootServicesTableLib.h> +#include <Library/DebugLib.h> +#include <Library/IoLib.h> +#include <Library/I2c.h> +#include <Protocol/I2cMaster.h>
+EFI_STATUS +EFIAPI +SetBusFrequency (
- IN CONST EFI_I2C_MASTER_PROTOCOL *This,
- IN OUT UINTN *BusClockHertz
- )
+{
- return (I2cSetBusSpeed(PcdGet32(PcdI2cBus), *BusClockHertz));
+}
+EFI_STATUS +EFIAPI +Reset (
- IN CONST EFI_I2C_MASTER_PROTOCOL *This
- )
+{
- I2cReset(PcdGet32(PcdI2cBus));
- return EFI_SUCCESS;
+}
+EFI_STATUS +EFIAPI StartRequest (
- IN CONST EFI_I2C_MASTER_PROTOCOL *This,
- IN UINTN SlaveAddress,
- IN EFI_I2C_REQUEST_PACKET *RequestPacket,
- IN EFI_EVENT Event OPTIONAL,
- OUT EFI_STATUS *I2cStatus OPTIONAL
- )
+{
- UINT32 Count;
- INT32 Ret;
- UINT32 Length;
- UINT8 *Buffer = NULL;
- UINT32 Flag;
- if (RequestPacket->OperationCount <= 0) {
- DEBUG((EFI_D_ERROR," Operation count is not valid %d\n",
RequestPacket->OperationCount));- return EFI_INVALID_PARAMETER;
- }
- if (RequestPacket->Operation == NULL) {
- DEBUG((EFI_D_ERROR," Operation array is NULL\n"));
- return EFI_INVALID_PARAMETER;
- }
- for (Count = 0; Count < RequestPacket->OperationCount; Count++) {
- Flag = RequestPacket->Operation[Count].Flags;
- Length = RequestPacket->Operation[Count].LengthInBytes;
- Buffer = RequestPacket->Operation[Count].Buffer;
- if (Length <= 0) {
DEBUG((EFI_D_ERROR," Invalid length of buffer %d\n", Length));return EFI_INVALID_PARAMETER;- }
- if (Flag == I2C_READ_FLAG) {
Ret = I2cDataRead (PcdGet32(PcdI2cBus), SlaveAddress,0x00, sizeof(SlaveAddress)/8, Buffer, Length);if (Ret != EFI_SUCCESS) {DEBUG((EFI_D_ERROR," I2c read operation failed (error %d)\n", Ret));return Ret;}- } else if (Flag == I2C_WRITE_FLAG) {
Ret = I2cDataWrite (PcdGet32(PcdI2cBus), SlaveAddress,0x00, sizeof(SlaveAddress)/8, Buffer, Length);if (Ret != EFI_SUCCESS) {DEBUG((EFI_D_ERROR," I2c write operation failed (error %d)\n", Ret));return Ret;}- } else {
DEBUG((EFI_D_ERROR," Invalid Flag %d\n",Flag));return EFI_INVALID_PARAMETER;- }
- }
- return EFI_SUCCESS;
+}
+CONST EFI_I2C_CONTROLLER_CAPABILITIES I2cControllerCapabilities = {
STATIC
- 0,
- 0,
- 0,
- 0
+};
+EFI_I2C_MASTER_PROTOCOL I2c = {
STATIC
- ///
- /// Set the clock frequency for the I2C bus.
- ///
- SetBusFrequency,
- ///
- /// Reset the I2C host controller.
- ///
- Reset,
- ///
- /// Start an I2C transaction in master mode on the host controller.
- ///
- StartRequest,
- ///
- /// Pointer to an EFI_I2C_CONTROLLER_CAPABILITIES data structure containing
- /// the capabilities of the I2C host controller.
- ///
- &I2cControllerCapabilities
+};
+/**
- The user Entry Point for I2C module. The user code starts with this function.
- @param[in] ImageHandle The firmware allocated handle for the EFI image.
- @param[in] SystemTable A pointer to the EFI System Table.
- @retval EFI_SUCCESS The entry point is executed successfully.
- @retval other Some error occurs when executing this entry point.
+**/ +EFI_STATUS +EFIAPI +InitializeI2c(
- IN EFI_HANDLE ImageHandle,
- IN EFI_SYSTEM_TABLE *SystemTable
- )
+{
- EFI_STATUS Status = 0;
- I2cBusInit();
- Status = gBS->InstallMultipleProtocolInterfaces (
&ImageHandle,&gEfiI2cMasterProtocolGuid, (VOID**)&I2c,NULL);- return Status;
+} diff --git a/Chips/Nxp/QoriqLs/I2c/I2cDxe.inf b/Chips/Nxp/QoriqLs/I2c/I2cDxe.inf new file mode 100644 index 0000000..0b37c38 --- /dev/null +++ b/Chips/Nxp/QoriqLs/I2c/I2cDxe.inf @@ -0,0 +1,52 @@ +/* I2cDxe.inf +# +# Component description file for I2c driver +# +# Copyright (c) 2016, Freescale Semiconductor, Inc. All rights reserved. +# +# This program and the accompanying materials +# are licensed and made available under the terms and conditions of the BSD License +# which accompanies this distribution. The full text of the license may be found at +# http://opensource.org/licenses/bsd-license.php +# +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +# +# +*/
+[Defines]
- INF_VERSION = 0x00010005
- BASE_NAME = I2c
- FILE_GUID = 4ec8b120-8307-11e0-bd91-0002a5d5c51b
Fresh GUID
- MODULE_TYPE = DXE_DRIVER
- VERSION_STRING = 1.0
- ENTRY_POINT = InitializeI2c
+[Sources.common]
- I2cDxe.c
+[LibraryClasses]
- I2cLib
- ArmLib
- PcdLib
- UefiLib
- UefiDriverEntryPoint
- MemoryAllocationLib
- IoLib
- PcdLib
+[Packages]
- MdePkg/MdePkg.dec
- OpenPlatformPkg/Platforms/Nxp/LS1043aRdb/LS1043aRdbPkg.dec
- OpenPlatformPkg/Chips/Nxp/QoriqLs/NxpQoriqLs.dec
+[Protocols]
- gEfiI2cMasterProtocolGuid
+[Pcd]
- gNxpQoriqLsTokenSpaceGuid.PcdI2cBus
- gNxpQoriqLsTokenSpaceGuid.PcdI2cSpeed
+[Depex]
- TRUE
-- 1.9.1