Hi Leif,
Thank you for review. I will wait for Alan's comments and test results on his hardware before the next version of the patch.
I'll split it up for the next version. Having multiple dependencies between modified files may not allow to create independent patches. The patch set may have still to be applied as one patch.
Thanks, Daniil
On 10/28/2016 10:49 AM, Leif Lindholm wrote:
Hi Daniil,
Thanks for this - looks like quite an effort.
I'm going to leave it to Alan to comment on the functional bits, but I have a few style comments throughout.
Starting with the fact that a recent update to edk2 PatchCheck.py now triggers warnings of the type: "EFI_D_ERROR was used, but DEBUG_ERROR is now recommended"
Can you re-run with the latest PatchCheck and get rid of these?
While I realise these have been very invasive changes, it would be a lot easier to review if it could have been split into a few more isolated changesets.
On Thu, Oct 27, 2016 at 09:02:30PM -0500, Daniil Egranov wrote:
Changelog:
v1 The patch adds support for multi-controller configuration.
v2
- Updated msk_if_softc structures to hold data pointers to its parent
controller structure and corresponding PHY structure.
- Updated e1000phy_softc structure to hold a data pointer to its
logical controller.
- Reduced number of parameters in multiple functions. Using the
msk_if_softc and msk_softc structure members instead.
- Corrected the code for dual MAC controllers. Each logical interface
has its own TX and RX buffers. The YUKON_DRIVER driver's structure includes a controller port number. The SNP interface functions passing a msk_if_softc object (corresponding to the controller interface) to the if_msk interface functions.
- Removed linked lists from the if_msk and e1000phy. The association
between msk_softc and controller resolved on the SNP interface level.
Changelog would normally go below '---' (when not in a cover letter) and in reverse chronological order. (At which point a commit message would be needed.)
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Daniil Egranov daniil.egranov@arm.com
Drivers/Net/MarvellYukonDxe/DriverBinding.c | 452 +++++++--- Drivers/Net/MarvellYukonDxe/MarvellYukon.h | 71 ++ Drivers/Net/MarvellYukonDxe/Snp.c | 64 +- Drivers/Net/MarvellYukonDxe/e1000phy.c | 241 +++--- Drivers/Net/MarvellYukonDxe/e1000phyreg.h | 12 + Drivers/Net/MarvellYukonDxe/if_msk.c | 1223 ++++++++++++++------------- Drivers/Net/MarvellYukonDxe/if_msk.h | 23 +- Drivers/Net/MarvellYukonDxe/if_mskreg.h | 14 +- Drivers/Net/MarvellYukonDxe/miivar.h | 15 +- 9 files changed, 1272 insertions(+), 843 deletions(-)
diff --git a/Drivers/Net/MarvellYukonDxe/DriverBinding.c b/Drivers/Net/MarvellYukonDxe/DriverBinding.c index 95068fa..6a51e3a 100644 --- a/Drivers/Net/MarvellYukonDxe/DriverBinding.c +++ b/Drivers/Net/MarvellYukonDxe/DriverBinding.c @@ -19,6 +19,8 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. #include "MarvellYukon.h" #include "if_msk.h" +static LIST_ENTRY MarvellYukonDrvDataHead;
Please use STATIC (so that people with broken toolchains can filter it out).
/** Test to see if this driver supports ControllerHandle. This service is called by the EFI boot service ConnectController(). In @@ -110,27 +112,14 @@ MarvellYukonDriverStart ( MAC_ADDR_DEVICE_PATH MacDeviceNode; VOID *ChildPciIo; YUKON_DRIVER *YukonDriver;
- Status = gBS->AllocatePool (EfiBootServicesData,
sizeof (YUKON_DRIVER),(VOID**) &YukonDriver);- if (EFI_ERROR (Status)) {
- DEBUG ((EFI_D_ERROR, "Marvell Yukon: AllocatePool() failed with Status = %r\n", EFI_OUT_OF_RESOURCES));
- return Status;
- }
- gBS->SetMem (YukonDriver, sizeof (YUKON_DRIVER), 0);
- EfiInitializeLock (&YukonDriver->Lock, TPL_NOTIFY);
- //
- // Set the structure signature
- //
- YukonDriver->Signature = YUKON_DRIVER_SIGNATURE;
- struct msk_softc *ScData;
- EFI_PCI_IO_PROTOCOL *PciIo;
- UINTN Port;
Status = gBS->OpenProtocol ( Controller, &gEfiPciIoProtocolGuid,
(VOID **) &YukonDriver->PciIo,
(VOID **) &PciIo, pThis->DriverBindingHandle, Controller, EFI_OPEN_PROTOCOL_BY_DRIVER@@ -143,131 +132,133 @@ MarvellYukonDriverStart ( } //
- // Initialize the simple network protocol
- // Initialize Marvell Yukon controller
- // Get number of ports and MAC address for each port //
- Status = InitializeSNPProtocol (YukonDriver);
- if (EFI_ERROR(Status)){
- DEBUG ((EFI_D_ERROR, "Marvell Yukon: InitializeSNPProtocol: ERROR Status = %r\n", Status));
- gBS->CloseProtocol (
Controller,&gEfiPciIoProtocolGuid,pThis->DriverBindingHandle,Controller);
- Status = mskc_attach (PciIo, &ScData);
- if (EFI_ERROR (Status)) {
- return Status; }
- //
- // Set Device Path
- //
- Status = gBS->OpenProtocol (
Controller,&gEfiDevicePathProtocolGuid,(VOID **) &ParentDevicePath,pThis->DriverBindingHandle,Controller,EFI_OPEN_PROTOCOL_GET_PROTOCOL);
- Status = MarvellYukonAddControllerData (Controller, ScData);
- if (EFI_ERROR (Status)) {
- return Status;
- }
- if (EFI_ERROR(Status)) {
- DEBUG ((EFI_D_ERROR, "Marvell Yukon: OpenProtocol:EFI_DEVICE_PATH_PROTOCOL error. Status = %r\n", Status));
- for (Port = 0; Port < ScData->msk_num_port; Port++) {
- gBS->CloseProtocol (
Controller,&gEfiPciIoProtocolGuid,pThis->DriverBindingHandle,Controller);
- Status = gBS->AllocatePool (EfiBootServicesData,
sizeof (YUKON_DRIVER),(VOID**) &YukonDriver);- if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "Marvell Yukon: AllocatePool() failed with Status = %r\n", Status));return Status;- }
- gBS->FreePool (YukonDriver);
- return Status;
- }
- if(ScData->msk_if[Port] == NULL) {
DEBUG ((EFI_D_ERROR, "Marvell Yukon: AllocatePool() failed with Status = %r\n", EFI_BAD_BUFFER_SIZE));return EFI_BAD_BUFFER_SIZE;- }
- gBS->SetMem (&MacDeviceNode, sizeof (MAC_ADDR_DEVICE_PATH), 0);
- MacDeviceNode.Header.Type = MESSAGING_DEVICE_PATH;
- MacDeviceNode.Header.SubType = MSG_MAC_ADDR_DP;
- gBS->SetMem (YukonDriver, sizeof (YUKON_DRIVER), 0);
- EfiInitializeLock (&YukonDriver->Lock, TPL_NOTIFY);
- SetDevicePathNodeLength (&MacDeviceNode, sizeof (MacDeviceNode));
- //
- // Set the structure signature
- //
- YukonDriver->Signature = YUKON_DRIVER_SIGNATURE;
- //
- // Initialize Yukon card so we can get the MAC address
- //
- Status = mskc_attach (YukonDriver->PciIo, &YukonDriver->SnpMode.PermanentAddress);
- //
- // Set MAC address
- //
- gBS->CopyMem (&YukonDriver->SnpMode.PermanentAddress, &(ScData->msk_if[Port])->MacAddress, sizeof (EFI_MAC_ADDRESS));
- if (EFI_ERROR (Status)) {
- gBS->FreePool (YukonDriver);
- return Status;
- }
- //
- // Set Port number
- //
- YukonDriver->Port = Port;
- mskc_detach();
- //
- // Initialize the simple network protocol
- //
- Status = InitializeSNPProtocol (YukonDriver);
- //
- // Assign fields for device path
- //
- gBS->CopyMem (&YukonDriver->SnpMode.CurrentAddress, &YukonDriver->SnpMode.PermanentAddress, sizeof (EFI_MAC_ADDRESS));
- gBS->CopyMem (&MacDeviceNode.MacAddress, &YukonDriver->SnpMode.CurrentAddress, sizeof (EFI_MAC_ADDRESS));
- if (EFI_ERROR(Status)){
DEBUG ((EFI_D_ERROR, "Marvell Yukon: InitializeSNPProtocol: ERROR Status = %r\n", Status));gBS->CloseProtocol (Controller,&gEfiPciIoProtocolGuid,pThis->DriverBindingHandle,Controller);- }
- MacDeviceNode.IfType = YukonDriver->SnpMode.IfType;
- YukonDriver->DevicePath = AppendDevicePathNode (ParentDevicePath, &MacDeviceNode.Header);
- if (YukonDriver->DevicePath == NULL) {
- DEBUG ((EFI_D_ERROR, "Marvell Yukon: AppendDevicePathNode: ERROR Status = %r\n", EFI_OUT_OF_RESOURCES));
- gBS->CloseProtocol (
- //
- // Set Device Path
- //
- Status = gBS->OpenProtocol ( Controller,
&gEfiPciIoProtocolGuid,
&gEfiDevicePathProtocolGuid,(VOID **) &ParentDevicePath, pThis->DriverBindingHandle,
Controller
Controller,EFI_OPEN_PROTOCOL_GET_PROTOCOL );
- gBS->FreePool (YukonDriver);
- return EFI_OUT_OF_RESOURCES;
- }
- //
- // Install both the simple network and device path protocols.
- //
- Status = gBS->InstallMultipleProtocolInterfaces (
&YukonDriver->Controller,&gEfiSimpleNetworkProtocolGuid,&YukonDriver->Snp,&gEfiDevicePathProtocolGuid,YukonDriver->DevicePath,NULL);
- if (EFI_ERROR(Status)) {
DEBUG ((EFI_D_ERROR, "Marvell Yukon: OpenProtocol:EFI_DEVICE_PATH_PROTOCOL error. Status = %r\n", Status));
- if (EFI_ERROR(Status)){
- DEBUG ((EFI_D_ERROR, "Marvell Yukon: InstallMultipleProtocolInterfaces error. Status = %r\n", Status));
gBS->CloseProtocol (Controller,&gEfiPciIoProtocolGuid,pThis->DriverBindingHandle,Controller);
- gBS->CloseProtocol (
Controller,&gEfiPciIoProtocolGuid,pThis->DriverBindingHandle,Controller);
gBS->FreePool (YukonDriver);return Status;- }
- gBS->FreePool (YukonDriver->DevicePath);
- gBS->FreePool (YukonDriver);
- return Status;
- } else {
- gBS->SetMem (&MacDeviceNode, sizeof (MAC_ADDR_DEVICE_PATH), 0);
- MacDeviceNode.Header.Type = MESSAGING_DEVICE_PATH;
- MacDeviceNode.Header.SubType = MSG_MAC_ADDR_DP;
- SetDevicePathNodeLength (&MacDeviceNode, sizeof (MacDeviceNode));
//
- // Hook as a child device
- // Assign fields for device path //
- Status = gBS->OpenProtocol (Controller,
&gEfiPciIoProtocolGuid,&ChildPciIo,pThis->DriverBindingHandle,YukonDriver->Controller,EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER);- if (EFI_ERROR(Status)){
DEBUG ((EFI_D_ERROR, "Marvell Yukon: OpenProtocol: child controller error. Status = %r\n", Status));
- gBS->CopyMem (&YukonDriver->SnpMode.CurrentAddress, &YukonDriver->SnpMode.PermanentAddress, sizeof (EFI_MAC_ADDRESS));
- gBS->CopyMem (&MacDeviceNode.MacAddress, &YukonDriver->SnpMode.CurrentAddress, sizeof (EFI_MAC_ADDRESS));
gBS->UninstallMultipleProtocolInterfaces (
- MacDeviceNode.IfType = YukonDriver->SnpMode.IfType;
- YukonDriver->DevicePath = AppendDevicePathNode (ParentDevicePath, &MacDeviceNode.Header);
- if (YukonDriver->DevicePath == NULL) {
DEBUG ((EFI_D_ERROR, "Marvell Yukon: AppendDevicePathNode: ERROR Status = %r\n", EFI_OUT_OF_RESOURCES));gBS->CloseProtocol ( Controller,
&gEfiSimpleNetworkProtocolGuid,&YukonDriver->Snp,&gEfiDevicePathProtocolGuid,YukonDriver->DevicePath,NULL
&gEfiPciIoProtocolGuid,pThis->DriverBindingHandle,Controller );gBS->FreePool (YukonDriver);return EFI_OUT_OF_RESOURCES;- }
- //
- // Install both the simple network and device path protocols.
- //
- Status = gBS->InstallMultipleProtocolInterfaces (
&YukonDriver->Controller,&gEfiSimpleNetworkProtocolGuid,&YukonDriver->Snp,&gEfiDevicePathProtocolGuid,YukonDriver->DevicePath,NULL);- if (EFI_ERROR(Status)){
DEBUG ((EFI_D_ERROR, "Marvell Yukon: InstallMultipleProtocolInterfaces error. Status = %r\n", Status));gBS->CloseProtocol ( Controller, @@ -280,13 +271,53 @@ MarvellYukonDriverStart ( gBS->FreePool (YukonDriver); return Status; } else {
DEBUG ((EFI_D_NET, "Marvell Yukon: MarvellYukonDriverSupported: New Controller Handle = %p\n", YukonDriver->Controller));
//// Hook as a child device//Status = gBS->OpenProtocol (Controller,&gEfiPciIoProtocolGuid,&ChildPciIo,pThis->DriverBindingHandle,YukonDriver->Controller,EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER);if (EFI_ERROR(Status)){DEBUG ((EFI_D_ERROR, "Marvell Yukon: OpenProtocol: child controller error. Status = %r\n", Status));gBS->UninstallMultipleProtocolInterfaces (Controller,&gEfiSimpleNetworkProtocolGuid,&YukonDriver->Snp,&gEfiDevicePathProtocolGuid,YukonDriver->DevicePath,NULL);gBS->CloseProtocol (Controller,&gEfiPciIoProtocolGuid,pThis->DriverBindingHandle,Controller);gBS->FreePool (YukonDriver->DevicePath);gBS->FreePool (YukonDriver);return Status;} else {DEBUG ((EFI_D_NET, "Marvell Yukon: MarvellYukonDriverSupported: New Controller Handle = %p\n", YukonDriver->Controller));}Status = MarvellYukonAddControllerData (YukonDriver->Controller, ScData);if (EFI_ERROR(Status)){DEBUG ((EFI_D_ERROR, "Marvell Yukon: Failed to register port %d with controller handle %p\n", Port, YukonDriver->Controller));}}
- }
- if (!EFI_ERROR(Status)) {
- Status = gBS->CreateEvent (EVT_SIGNAL_EXIT_BOOT_SERVICES, TPL_CALLBACK,
&MarvellYukonNotifyExitBoot, YukonDriver, &YukonDriver->ExitBootEvent);
- if (!EFI_ERROR(Status)) {
Status = gBS->CreateEvent (EVT_SIGNAL_EXIT_BOOT_SERVICES, TPL_CALLBACK,&MarvellYukonNotifyExitBoot, YukonDriver, &YukonDriver->ExitBootEvent);- } }
return Status; @@ -319,6 +350,8 @@ MarvellYukonDriverStop ( EFI_STATUS Status; YUKON_DRIVER *YukonDriver; EFI_TPL OldTpl;
- UINTN ChildController;
- struct msk_softc *ScData;
if (pThis == NULL) { DEBUG ((EFI_D_ERROR, "Marvell Yukon: MarvellYukonDriverStop() failed with Status = %r\n", EFI_INVALID_PARAMETER)); @@ -330,15 +363,10 @@ MarvellYukonDriverStop ( return EFI_INVALID_PARAMETER; }
- if (NumberOfChildren > 0) {
- //
- // Currently support only one network port
- //
- ASSERT (NumberOfChildren == 1);
- for(ChildController = 0; ChildController < NumberOfChildren; ChildController ++) {
Space after "for".
Status = gBS->OpenProtocol (
ChildHandleBuffer[0],
ChildHandleBuffer[ChildController], &gEfiSimpleNetworkProtocolGuid, (VOID **) &SimpleNetwork, pThis->DriverBindingHandle,@@ -349,10 +377,16 @@ MarvellYukonDriverStop ( if (!EFI_ERROR(Status)) { YukonDriver = YUKON_DEV_FROM_THIS_SNP (SimpleNetwork);
Status = MarvellYukonGetControllerData(YukonDriver->Controller, &ScData);if (EFI_ERROR(Status)) {continue;}OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
ASSERT (YukonDriver->Controller == ChildHandleBuffer[0]);if (YukonDriver->SnpMode.State != EfiSimpleNetworkStopped) {
ASSERT (YukonDriver->Controller == ChildHandleBuffer[ChildController]);if (YukonDriver->SnpMode.State != EfiSimpleNetworkStopped) {// // Device in use, cannot stop driver instance @@ -364,11 +398,15 @@ MarvellYukonDriverStop ( // // Unhook the child controller //
gBS->CloseProtocol (Controller,
Status = gBS->CloseProtocol (Controller, &gEfiPciIoProtocolGuid, pThis->DriverBindingHandle, YukonDriver->Controller);
if (EFI_ERROR(Status)){DEBUG ((EFI_D_ERROR, "Marvell Yukon: MarvellYukonDriverStop:Close Child EfiPciIoProtocol error. Status %r\n", Status));}Status = gBS->UninstallMultipleProtocolInterfaces ( YukonDriver->Controller, &gEfiSimpleNetworkProtocolGuid,@@ -382,25 +420,37 @@ MarvellYukonDriverStop ( DEBUG ((EFI_D_ERROR, "Marvell Yukon: MarvellYukonDriverStop:UninstallMultipleProtocolInterfaces error. Status %r\n", Status)); }
gBS->FreePool(ScData);MarvellYukonDelControllerData(YukonDriver->Controller);gBS->CloseEvent (YukonDriver->ExitBootEvent); gBS->FreePool (YukonDriver->DevicePath); gBS->FreePool (YukonDriver); } gBS->RestoreTPL (OldTpl); }
- } else {
- Status = gBS->CloseProtocol (
Controller,&gEfiPciIoProtocolGuid,pThis->DriverBindingHandle,Controller);
- }
- if (EFI_ERROR(Status)){
DEBUG ((EFI_D_ERROR, "Marvell Yukon: MarvellYukonDriverStop:Close EfiPciIoProtocol error. Status %r\n", Status));- }
- Status = gBS->CloseProtocol (
Controller,&gEfiPciIoProtocolGuid,pThis->DriverBindingHandle,Controller);- if (EFI_ERROR(Status)){
- DEBUG ((EFI_D_ERROR, "Marvell Yukon: MarvellYukonDriverStop:Close EfiPciIoProtocol error. Status %r\n", Status));
- }
- Status = MarvellYukonGetControllerData(Controller, &ScData);
- if (EFI_ERROR(Status)) {
- return Status; }
- mskc_shutdown (ScData);
- gBS->FreePool(ScData);
- Status = MarvellYukonDelControllerData(Controller);
- return Status; }
@@ -436,6 +486,123 @@ MarvellYukonNotifyExitBoot ( } } +/**
- Get driver's data structure associated with controller
- @param [in] Controller Controller Id.
- @param [out] Data Driver's data.
+**/ +EFI_STATUS +EFIAPI +MarvellYukonGetControllerData(
- IN EFI_HANDLE Controller,
- OUT struct msk_softc **Data
- )
+{
- MSK_LINKED_DRV_BUF *DrvNode;
- EFI_STATUS Status;
- Status = MarvellYukonFindControllerNode (Controller, &DrvNode);
- if (!EFI_ERROR(Status)) {
- *Data = DrvNode->Data;
- }
- return Status;
+}
+/**
- Add driver's data structure associated with controller
- @param [in] Controller Controller Id.
- @param [in] Data Driver's data.
+**/ +EFI_STATUS +EFIAPI +MarvellYukonAddControllerData (
- IN EFI_HANDLE Controller,
- IN struct msk_softc *Data
- )
+{
- MSK_LINKED_DRV_BUF *DrvNode;
- EFI_STATUS Status;
- Status = MarvellYukonFindControllerNode (Controller, &DrvNode);
- if (EFI_ERROR(Status)) {
- Status = gBS->AllocatePool (EfiBootServicesData,
sizeof (MSK_LINKED_DRV_BUF),(VOID**) &DrvNode);- if (!EFI_ERROR (Status)) {
DrvNode->Signature = MSK_DRV_SIGNATURE;DrvNode->Controller = Controller;DrvNode->Data = Data;InsertTailList (&MarvellYukonDrvDataHead, &DrvNode->Link);- }
- } else {
- Status = EFI_ALREADY_STARTED;
- }
- return Status;
+}
+/**
- Delete driver's data structure associated with controller
- @param [in] Controller Controller Id.
+**/ +EFI_STATUS +EFIAPI +MarvellYukonDelControllerData (
- IN EFI_HANDLE Controller
- )
+{
- MSK_LINKED_DRV_BUF *DrvNode;
- EFI_STATUS Status;
- Status = MarvellYukonFindControllerNode (Controller, &DrvNode);
- if (!EFI_ERROR(Status)) {
- RemoveEntryList (&DrvNode->Link);
- gBS->FreePool (DrvNode);
- }
- return Status;
+}
+/**
- Find node associated with controller
- @param [in] Controller Controller Id.
- @param [out] DrvLinkedBuff Controller's node.
+**/ +EFI_STATUS +EFIAPI +MarvellYukonFindControllerNode (
- IN EFI_HANDLE Controller,
- OUT MSK_LINKED_DRV_BUF **DrvLinkedBuff
- )
+{
- MSK_LINKED_DRV_BUF *DrvBuffNode;
- EFI_STATUS Status;
- LIST_ENTRY *Node;
- Status = EFI_NOT_FOUND;
- Node = GetFirstNode (&MarvellYukonDrvDataHead);
- while (!IsNull (&MarvellYukonDrvDataHead, Node)) {
- DrvBuffNode = MSK_DRV_INFO_FROM_THIS (Node);
- if (DrvBuffNode->Controller == Controller) {
*DrvLinkedBuff = DrvBuffNode;Status = EFI_SUCCESS;break;- }
- Node = GetNextNode (&MarvellYukonDrvDataHead, Node);
- }
- return Status;
+}
- // // Simple Network Protocol Driver Global Variables //
@@ -487,7 +654,10 @@ InitializeMarvellYukonDriver ( if (EFI_ERROR (Status)) { DEBUG ((EFI_D_ERROR, "Marvell Yukon: InitializeMarvellYukonDriver(): Driver binding failed\n"));
- return Status; }
- InitializeListHead (&MarvellYukonDrvDataHead);
- return Status; }
diff --git a/Drivers/Net/MarvellYukonDxe/MarvellYukon.h b/Drivers/Net/MarvellYukonDxe/MarvellYukon.h index e6110cb..07f5389 100644 --- a/Drivers/Net/MarvellYukonDxe/MarvellYukon.h +++ b/Drivers/Net/MarvellYukonDxe/MarvellYukon.h @@ -43,6 +43,7 @@ typedef struct { EFI_LOCK Lock; EFI_HANDLE Controller;
- UINTN Port; EFI_EVENT ExitBootEvent;
EFI_SIMPLE_NETWORK_PROTOCOL Snp; @@ -58,6 +59,22 @@ typedef struct { #define SNP_MEM_PAGES(x) (((x) - 1) / 4096 + 1) +typedef struct {
- UINT32 Signature;
- LIST_ENTRY Link;
- EFI_HANDLE Controller;
- struct msk_softc *Data;
+} MSK_LINKED_DRV_BUF;
+#define MSK_DRV_SIGNATURE SIGNATURE_32 ('m', 's', 'k', 'c')
+#define MSK_DRV_INFO_FROM_THIS(a) \
- CR (a, \
MSK_LINKED_DRV_BUF, \Link, \MSK_DRV_SIGNATURE \);- // // Global Variables //
@@ -708,4 +725,58 @@ MarvellYukonNotifyExitBoot ( IN VOID *Context ); +/**
- Get driver's data structure associated with controller
- @param [in] Controller Controller Id.
- @param [out] Data Driver's data.
+**/ +EFI_STATUS +EFIAPI +MarvellYukonGetControllerData(
- IN EFI_HANDLE Controller,
- OUT struct msk_softc **Data
- );
+/**
- Add driver's data structure associated with controller
- @param [in] Controller Controller Id.
- @param [in] Data Driver's data.
+**/ +EFI_STATUS +EFIAPI +MarvellYukonAddControllerData (
- IN EFI_HANDLE Controller,
- IN struct msk_softc *
- );
+/**
- Delete driver's data structure associated with controller
- @param [in] Controller Controller Id.
+**/ +EFI_STATUS +EFIAPI +MarvellYukonDelControllerData (
- IN EFI_HANDLE Controller
- );
+/**
- Find node associated with controller
- @param [in] Controller Controller Id.
- @param [out] DrvLinkedBuff Controller's node.
+**/ +EFI_STATUS +EFIAPI +MarvellYukonFindControllerNode (
- IN EFI_HANDLE Controller,
- OUT MSK_LINKED_DRV_BUF **DrvLinkedBuff
- );
- /* _SNP_H_ */
diff --git a/Drivers/Net/MarvellYukonDxe/Snp.c b/Drivers/Net/MarvellYukonDxe/Snp.c index 3d84f84..e4026d5 100644 --- a/Drivers/Net/MarvellYukonDxe/Snp.c +++ b/Drivers/Net/MarvellYukonDxe/Snp.c @@ -123,6 +123,7 @@ SnpGetStatus ( EFI_STATUS Status; YUKON_DRIVER *Snp; EFI_TPL OldTpl;
- struct msk_softc *ScData;
if (This == NULL) { return EFI_INVALID_PARAMETER; @@ -133,6 +134,11 @@ SnpGetStatus ( return EFI_INVALID_PARAMETER; }
- Status = MarvellYukonGetControllerData(Snp->Controller, &ScData);
- if (EFI_ERROR(Status)) {
- return Status;
- }
- OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
switch (Snp->SnpMode.State) { @@ -148,7 +154,7 @@ SnpGetStatus ( goto ON_EXIT; }
- mskc_getstatus (InterruptStatus, TxBuf);
- mskc_getstatus (ScData->msk_if[Snp->Port], InterruptStatus, TxBuf); Status = EFI_SUCCESS;
ON_EXIT: @@ -201,6 +207,7 @@ SnpInitialize ( EFI_STATUS Status; YUKON_DRIVER *YukonDriver; EFI_TPL OldTpl;
- struct msk_softc *ScData;
DEBUG ((EFI_D_NET, "Marvell Yukon: SnpInitialize()\n")); if (This == NULL) { @@ -210,6 +217,11 @@ SnpInitialize ( YukonDriver = YUKON_DEV_FROM_THIS_SNP (This);
- Status = MarvellYukonGetControllerData(YukonDriver->Controller, &ScData);
- if (EFI_ERROR(Status)) {
- return Status;
- }
- OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
switch (YukonDriver->SnpMode.State) { @@ -230,7 +242,7 @@ SnpInitialize ( gBS->SetMem (YukonDriver->SnpMode.MCastFilter, sizeof YukonDriver->SnpMode.MCastFilter, 0); gBS->CopyMem (&YukonDriver->SnpMode.CurrentAddress, &YukonDriver->SnpMode.PermanentAddress, sizeof (EFI_MAC_ADDRESS));
- Status = mskc_init ();
- Status = mskc_init (ScData->msk_if[YukonDriver->Port]);
if (EFI_ERROR (Status)) { goto ON_ERROR_RESTORE_TPL; @@ -511,6 +523,7 @@ SnpReceive ( EFI_STATUS Status; YUKON_DRIVER *Snp; EFI_TPL OldTpl;
- struct msk_softc *ScData;
if (This == NULL) { return EFI_INVALID_PARAMETER; @@ -518,6 +531,11 @@ SnpReceive ( Snp = YUKON_DEV_FROM_THIS_SNP (This);
- Status = MarvellYukonGetControllerData(Snp->Controller, &ScData);
- if (EFI_ERROR(Status)) {
- return Status;
- }
- OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
switch (Snp->SnpMode.State) { @@ -538,7 +556,7 @@ SnpReceive ( goto ON_EXIT; }
- Status = mskc_receive (BufferSize, Buffer);
- Status = mskc_receive (ScData->msk_if[Snp->Port], BufferSize, Buffer); if (EFI_ERROR (Status)) { if (Status == EFI_NOT_READY) { goto ON_EXIT_NO_DEBUG;
@@ -681,6 +699,7 @@ SnpReceiveFilters ( YUKON_DRIVER *YukonDriver; EFI_TPL OldTpl; UINT32 newReceiveFilter;
- struct msk_softc *ScData;
DEBUG ((EFI_D_NET, "Marvell Yukon: SnpReceiveFilters()\n")); if (This == NULL) { @@ -690,6 +709,11 @@ SnpReceiveFilters ( YukonDriver = YUKON_DEV_FROM_THIS_SNP (This);
- Status = MarvellYukonGetControllerData(YukonDriver->Controller, &ScData);
- if (EFI_ERROR(Status)) {
- return Status;
- }
- OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
switch (YukonDriver->SnpMode.State) { @@ -743,7 +767,7 @@ SnpReceiveFilters ( } YukonDriver->SnpMode.ReceiveFilterSetting = newReceiveFilter;
- mskc_rxfilter (YukonDriver->SnpMode.ReceiveFilterSetting, MCastFilterCnt, MCastFilter);
- mskc_rxfilter (ScData->msk_if[YukonDriver->Port], YukonDriver->SnpMode.ReceiveFilterSetting, MCastFilterCnt, MCastFilter);
Status = EFI_SUCCESS; goto ON_EXIT; @@ -860,6 +884,7 @@ SnpShutdown ( EFI_STATUS Status; YUKON_DRIVER *YukonDriver; EFI_TPL OldTpl;
- struct msk_softc *ScData;
DEBUG ((EFI_D_NET, "Marvell Yukon: SnpShutdown()\n")); // @@ -872,6 +897,11 @@ SnpShutdown ( YukonDriver = YUKON_DEV_FROM_THIS_SNP (This);
- Status = MarvellYukonGetControllerData(YukonDriver->Controller, &ScData);
- if (EFI_ERROR(Status)) {
- return Status;
- }
- OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
// @@ -890,7 +920,7 @@ SnpShutdown ( goto ON_ERROR_RESTORE_TPL; }
- mskc_shutdown ();
- mskc_stop_if (ScData->msk_if[YukonDriver->Port]); YukonDriver->SnpMode.State = EfiSimpleNetworkStarted; Status = EFI_SUCCESS;
@@ -941,6 +971,7 @@ SnpStart ( YUKON_DRIVER *YukonDriver; EFI_TPL OldTpl; EFI_STATUS Status;
- struct msk_softc *ScData;
DEBUG ((EFI_D_NET, "Marvell Yukon: SnpStart()\n")); if (This == NULL) { @@ -950,6 +981,11 @@ SnpStart ( YukonDriver = YUKON_DEV_FROM_THIS_SNP (This);
- Status = MarvellYukonGetControllerData(YukonDriver->Controller, &ScData);
- if (EFI_ERROR(Status)) {
- return Status;
- }
- OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
switch (YukonDriver->SnpMode.State) { @@ -966,7 +1002,7 @@ SnpStart ( goto ON_ERROR_RESTORE_TPL; }
- Status = mskc_attach (YukonDriver->PciIo, &YukonDriver->SnpMode.PermanentAddress);
- Status = mskc_attach_if (ScData->msk_if[YukonDriver->Port], YukonDriver->Port);
if (EFI_ERROR (Status)) { goto ON_ERROR_RESTORE_TPL; @@ -1244,6 +1280,7 @@ SnpStop ( EFI_STATUS Status; YUKON_DRIVER *YukonDriver; EFI_TPL OldTpl;
- struct msk_softc *ScData;
DEBUG ((EFI_D_NET, "Marvell Yukon: SnpStop()\n")); if (This == NULL) { @@ -1253,6 +1290,11 @@ SnpStop ( YukonDriver = YUKON_DEV_FROM_THIS_SNP (This);
- Status = MarvellYukonGetControllerData(YukonDriver->Controller, &ScData);
- if (EFI_ERROR(Status)) {
- return Status;
- }
- OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
switch (YukonDriver->SnpMode.State) { @@ -1269,7 +1311,7 @@ SnpStop ( goto ON_ERROR_RESTORE_TPL; }
- mskc_detach ();
- mskc_detach_if (ScData->msk_if[YukonDriver->Port]); YukonDriver->SnpMode.State = EfiSimpleNetworkStopped; gBS->SetMem (&YukonDriver->SnpMode.CurrentAddress, sizeof (EFI_MAC_ADDRESS), 0); Status = EFI_SUCCESS;
@@ -1354,6 +1396,7 @@ SnpTransmit ( EFI_TPL OldTpl; ETHER_HEAD *Frame; UINT16 ProtocolNet;
- struct msk_softc *ScData;
DEBUG ((EFI_D_NET, "Marvell Yukon: SnpTransmit()\n")); if (This == NULL) { @@ -1366,6 +1409,11 @@ SnpTransmit ( return EFI_DEVICE_ERROR; }
- Status = MarvellYukonGetControllerData(YukonDriver->Controller, &ScData);
- if (EFI_ERROR(Status)) {
- return Status;
- }
- OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
switch (YukonDriver->SnpMode.State) { @@ -1407,7 +1455,7 @@ SnpTransmit ( gBS->CopyMem (&Frame->EtherType, &ProtocolNet, sizeof (UINT16)); }
- Status = mskc_transmit (BufferSize, Buffer);
- Status = mskc_transmit (ScData->msk_if[YukonDriver->Port], BufferSize, Buffer);
ON_EXIT: gBS->RestoreTPL (OldTpl); diff --git a/Drivers/Net/MarvellYukonDxe/e1000phy.c b/Drivers/Net/MarvellYukonDxe/e1000phy.c index dee4cdf..a3c74c4 100644 --- a/Drivers/Net/MarvellYukonDxe/e1000phy.c +++ b/Drivers/Net/MarvellYukonDxe/e1000phy.c @@ -57,6 +57,7 @@ #include <Library/MemoryAllocationLib.h> #include <Library/DebugLib.h> #include <Library/UefiBootServicesTableLib.h> +#include <Library/BaseLib.h> #include "if_media.h" @@ -65,26 +66,22 @@ #include "e1000phyreg.h" static EFI_STATUS e1000phy_probe (const struct mii_attach_args *ma); -static void e1000phy_attach (const struct mii_attach_args *ma); +static void e1000phy_attach (struct e1000phy_softc *, const struct mii_attach_args *ma); +static void e1000phy_service (struct e1000phy_softc *, INTN); +static void e1000phy_status (struct e1000phy_softc *); +static void e1000phy_reset (struct e1000phy_softc *); +static void e1000phy_mii_phy_auto (struct e1000phy_softc *);
If you could change static and void in any of the lines that you modify to STATIC and VOID, that'd be great. Don't worry about the others for now.
+INTN msk_phy_readreg (VOID *, INTN); +INTN msk_phy_writereg (VOID *, INTN, INTN); +void msk_miibus_statchg (VOID *);
- static const struct mii_phydesc * mii_phy_match (const struct mii_attach_args *ma, const struct mii_phydesc *mpd); static const struct mii_phydesc * mii_phy_match_gen (const struct mii_attach_args *ma, const struct mii_phydesc *mpd, UINTN endlen); static EFI_STATUS mii_phy_dev_probe (const struct mii_attach_args *ma, const struct mii_phydesc *mpd);
-struct e1000phy_softc {
- struct mii_softc mii_sc;
- INTN mii_model;
- const struct msk_mii_data *mmd;
-};
-struct e1000phy_softc *mPhySoftc;
-static void mii_phy_update (INTN); -static void e1000phy_service (INTN); -static void e1000phy_status (struct mii_softc *); -static void e1000phy_reset (struct mii_softc *); -static void e1000phy_mii_phy_auto (void); +static void mii_phy_update (struct e1000phy_softc *, INTN); static const struct mii_phydesc e1000phys[] = { MII_PHY_DESC (MARVELL, E1000), @@ -113,53 +110,70 @@ static const struct mii_phydesc e1000phys[] = { EFI_STATUS e1000_probe_and_attach ( struct mii_data *mii,
- const struct msk_mii_data *mmd
- )
- const struct msk_mii_data *mmd,
- void *sc_if,
- void **rsc_phy
- ) { struct mii_attach_args ma; INTN bmsr; EFI_STATUS Status;
- struct e1000phy_softc *sc_phy;
Status = gBS->AllocatePool (EfiBootServicesData, sizeof (struct e1000phy_softc),
(VOID**) &mPhySoftc);
(VOID**) &sc_phy);
- gBS->SetMem (mPhySoftc, sizeof (struct e1000phy_softc), 0);
- mPhySoftc->mmd = mmd;
- gBS->SetMem (sc_phy, sizeof (struct e1000phy_softc), 0);
- sc_phy->mmd = mmd;
- sc_phy->sc_if = sc_if;
/* * Check to see if there is a PHY at this address. Note, * many braindead PHYs report 0/0 in their ID registers, * so we test for media in the BMSR. */
- bmsr = PHY_READ (mPhySoftc, E1000_SR);
- bmsr = PHY_READ (sc_phy, E1000_SR); if (bmsr == 0 || bmsr == 0xffff || (bmsr & (E1000_SR_EXTENDED_STATUS|E1000_SR_MEDIAMASK)) == 0) { /* Assume no PHY at this address. */
- gBS->FreePool (mPhySoftc);
- gBS->FreePool (sc_phy); return EFI_DEVICE_ERROR; }
/* * Extract the IDs. */
- ma.mii_id1 = PHY_READ (mPhySoftc, E1000_ID1);
- ma.mii_id2 = PHY_READ (mPhySoftc, E1000_ID2);
- ma.mii_id1 = PHY_READ (sc_phy, E1000_ID1);
- ma.mii_id2 = PHY_READ (sc_phy, E1000_ID2);
ma.mii_data = mii; Status = e1000phy_probe (&ma); if (EFI_ERROR (Status)) {
- gBS->FreePool (mPhySoftc);
- gBS->FreePool (sc_phy); return Status; }
- e1000phy_attach (&ma);
- e1000phy_attach (sc_phy, &ma);
- *rsc_phy = sc_phy;
- return EFI_SUCCESS; }
+VOID +e1000phy_detach (
- struct e1000phy_softc *sc_phy
- )
+{
- if(sc_phy != NULL) {
- gBS->FreePool(sc_phy);
- }
+}
- EFI_STATUS e1000phy_probe ( const struct mii_attach_args *ma
@@ -170,25 +184,26 @@ e1000phy_probe ( static void e1000phy_attach (
- const struct mii_attach_args *ma
- struct e1000phy_softc *sc_phy,
- const struct mii_attach_args *ma ) { struct mii_softc *sc;
- sc = &mPhySoftc->mii_sc;
- sc = &sc_phy->mii_sc; sc->mii_pdata = ma->mii_data; sc->mii_anegticks = MII_ANEGTICKS_GIGE;
- mPhySoftc->mii_model = MII_MODEL (ma->mii_id2);
- sc_phy->mii_model = MII_MODEL (ma->mii_id2);
- if (mPhySoftc->mmd != NULL && (mPhySoftc->mmd->mii_flags & MIIF_HAVEFIBER) != 0) {
- if (sc_phy->mmd != NULL && (sc_phy->mmd->mii_flags & MIIF_HAVEFIBER) != 0) { sc->mii_flags |= MIIF_HAVEFIBER; }
- switch (mPhySoftc->mii_model) {
- switch (sc_phy->mii_model) { case MII_MODEL_MARVELL_E1011: case MII_MODEL_MARVELL_E1112:
if (PHY_READ (mPhySoftc, E1000_ESSR) & E1000_ESSR_FIBER_LINK) {
if (PHY_READ (sc_phy, E1000_ESSR) & E1000_ESSR_FIBER_LINK) { sc->mii_flags |= MIIF_HAVEFIBER; } break;@@ -204,49 +219,52 @@ e1000phy_attach ( * that information should be used to select default * type of PHY. */
PHY_WRITE (mPhySoftc, E1000_EADR, 0);
PHY_WRITE (sc_phy, E1000_EADR, 0); break;
- e1000phy_reset (sc);
- e1000phy_reset (sc_phy);
- sc->mii_capabilities = PHY_READ (mPhySoftc, E1000_SR) & 0xFFFFFFFF;
- sc->mii_capabilities = PHY_READ (sc_phy, E1000_SR) & 0xFFFFFFFF; if (sc->mii_capabilities & E1000_SR_EXTENDED_STATUS) {
- sc->mii_extcapabilities = PHY_READ (mPhySoftc, E1000_ESR);
- sc->mii_extcapabilities = PHY_READ (sc_phy, E1000_ESR); } }
static void e1000phy_reset (
- struct mii_softc *sc
- struct e1000phy_softc *sc_phy ) { UINT16 reg; UINT16 page;
- struct mii_softc *sc;
- reg = PHY_READ (mPhySoftc, E1000_SCR);
- sc = &sc_phy->mii_sc;
- reg = PHY_READ (sc_phy, E1000_SCR); if ((sc->mii_flags & MIIF_HAVEFIBER) != 0) { reg &= ~E1000_SCR_AUTO_X_MODE;
- PHY_WRITE (mPhySoftc, E1000_SCR, reg);
- if (mPhySoftc->mii_model == MII_MODEL_MARVELL_E1112) {
- PHY_WRITE (sc_phy, E1000_SCR, reg);
- if (sc_phy->mii_model == MII_MODEL_MARVELL_E1112) { // Select 1000BASE-X only mode.
page = PHY_READ (mPhySoftc, E1000_EADR);PHY_WRITE (mPhySoftc, E1000_EADR, 2);reg = PHY_READ (mPhySoftc, E1000_SCR);
page = PHY_READ (sc_phy, E1000_EADR);PHY_WRITE (sc_phy, E1000_EADR, 2);reg = PHY_READ (sc_phy, E1000_SCR); reg &= ~E1000_SCR_MODE_MASK; reg |= E1000_SCR_MODE_1000BX;
PHY_WRITE (mPhySoftc, E1000_SCR, reg);if (mPhySoftc->mmd != NULL && mPhySoftc->mmd->pmd == 'P') {
PHY_WRITE (sc_phy, E1000_SCR, reg);if (sc_phy->mmd != NULL && sc_phy->mmd->pmd == 'P') { // Set SIGDET polarity low for SFP module
PHY_WRITE (mPhySoftc, E1000_EADR, 1);reg = PHY_READ (mPhySoftc, E1000_SCR);
PHY_WRITE (sc_phy, E1000_EADR, 1);reg = PHY_READ (sc_phy, E1000_SCR); reg |= E1000_SCR_FIB_SIGDET_POLARITY;
PHY_WRITE (mPhySoftc, E1000_SCR, reg);
PHY_WRITE (sc_phy, E1000_SCR, reg); }
PHY_WRITE (mPhySoftc, E1000_EADR, page);
PHY_WRITE (sc_phy, E1000_EADR, page); }
- switch (mPhySoftc->mii_model) {
- switch (sc_phy->mii_model) { case MII_MODEL_MARVELL_E1111: case MII_MODEL_MARVELL_E1112: case MII_MODEL_MARVELL_E1116:
@@ -256,7 +274,7 @@ e1000phy_reset ( // Disable energy detect mode reg &= ~E1000_SCR_EN_DETECT_MASK; reg |= E1000_SCR_AUTO_X_MODE;
if (mPhySoftc->mii_model == MII_MODEL_MARVELL_E1116)
if (sc_phy->mii_model == MII_MODEL_MARVELL_E1116) reg &= ~E1000_SCR_POWER_DOWN; reg |= E1000_SCR_ASSERT_CRS_ON_TX; break;@@ -270,81 +288,82 @@ e1000phy_reset ( E1000_SCR_SCRAMBLER_DISABLE); reg |= E1000_SCR_LPNP; // XXX Enable class A driver for Yukon FE+ A0
PHY_WRITE (mPhySoftc, 0x1C, PHY_READ (mPhySoftc, 0x1C) | 0x0001);
PHY_WRITE (sc_phy, 0x1C, PHY_READ (sc_phy, 0x1C) | 0x0001); break; default: reg &= ~E1000_SCR_AUTO_X_MODE; reg |= E1000_SCR_ASSERT_CRS_ON_TX; break; }
- if (mPhySoftc->mii_model != MII_MODEL_MARVELL_E3016) {
- if (sc_phy->mii_model != MII_MODEL_MARVELL_E3016) { /* Auto correction for reversed cable polarity. */ reg &= ~E1000_SCR_POLARITY_REVERSAL; }
- PHY_WRITE (mPhySoftc, E1000_SCR, reg);
- PHY_WRITE (sc_phy, E1000_SCR, reg);
- if (mPhySoftc->mii_model == MII_MODEL_MARVELL_E1116 ||
mPhySoftc->mii_model == MII_MODEL_MARVELL_E1149) {PHY_WRITE (mPhySoftc, E1000_EADR, 2);reg = PHY_READ (mPhySoftc, E1000_SCR);
- if (sc_phy->mii_model == MII_MODEL_MARVELL_E1116 ||
sc_phy->mii_model == MII_MODEL_MARVELL_E1149) {PHY_WRITE (sc_phy, E1000_EADR, 2);reg = PHY_READ (sc_phy, E1000_SCR); reg |= E1000_SCR_RGMII_POWER_UP;
PHY_WRITE (mPhySoftc, E1000_SCR, reg);PHY_WRITE (mPhySoftc, E1000_EADR, 0);
PHY_WRITE (sc_phy, E1000_SCR, reg);PHY_WRITE (sc_phy, E1000_EADR, 0); }
- switch (mPhySoftc->mii_model) {
- switch (sc_phy->mii_model) { case MII_MODEL_MARVELL_E3082: case MII_MODEL_MARVELL_E1112: case MII_MODEL_MARVELL_E1118: break; case MII_MODEL_MARVELL_E1116:
page = PHY_READ (mPhySoftc, E1000_EADR);
page = PHY_READ (sc_phy, E1000_EADR); /* Select page 3, LED control register. */
PHY_WRITE (mPhySoftc, E1000_EADR, 3);PHY_WRITE (mPhySoftc, E1000_SCR,
PHY_WRITE (sc_phy, E1000_EADR, 3);PHY_WRITE (sc_phy, E1000_SCR, E1000_SCR_LED_LOS (1) | /* Link/Act */ E1000_SCR_LED_INIT (8) | /* 10Mbps */ E1000_SCR_LED_STAT1 (7) | /* 100Mbps */ E1000_SCR_LED_STAT0 (7)); /* 1000Mbps */ /* Set blink rate. */
PHY_WRITE (mPhySoftc, E1000_IER, E1000_PULSE_DUR (E1000_PULSE_170MS) | E1000_BLINK_RATE (E1000_BLINK_84MS));PHY_WRITE (mPhySoftc, E1000_EADR, page);
PHY_WRITE (sc_phy, E1000_IER, E1000_PULSE_DUR (E1000_PULSE_170MS) | E1000_BLINK_RATE (E1000_BLINK_84MS));PHY_WRITE (sc_phy, E1000_EADR, page); break; case MII_MODEL_MARVELL_E3016: /* LED2 -> ACT, LED1 -> LINK, LED0 -> SPEED. */
PHY_WRITE (mPhySoftc, 0x16, 0x0B << 8 | 0x05 << 4 | 0x04);
PHY_WRITE (sc_phy, 0x16, 0x0B << 8 | 0x05 << 4 | 0x04); /* Integrated register calibration workaround. */
PHY_WRITE (mPhySoftc, 0x1D, 17);PHY_WRITE (mPhySoftc, 0x1E, 0x3F60);
PHY_WRITE (sc_phy, 0x1D, 17);PHY_WRITE (sc_phy, 0x1E, 0x3F60); break; default: /* Force TX_CLK to 25MHz clock. */
reg = PHY_READ (mPhySoftc, E1000_ESCR);
reg = PHY_READ (sc_phy, E1000_ESCR); reg |= E1000_ESCR_TX_CLK_25;
PHY_WRITE (mPhySoftc, E1000_ESCR, reg);
PHY_WRITE (sc_phy, E1000_ESCR, reg); break;/* Reset the PHY so all changes take effect. */
- reg = PHY_READ (mPhySoftc, E1000_CR);
- reg = PHY_READ (sc_phy, E1000_CR); reg |= E1000_CR_RESET;
- PHY_WRITE (mPhySoftc, E1000_CR, reg);
- PHY_WRITE (sc_phy, E1000_CR, reg); }
static void mii_phy_update (
- INTN cmd
- struct e1000phy_softc *sc_phy,
- INTN cmd ) {
- struct mii_softc *sc = &mPhySoftc->mii_sc;
- struct mii_softc *sc = &sc_phy->mii_sc; struct mii_data *mii = sc->mii_pdata;
if (sc->mii_media_active != mii->mii_media_active || sc->mii_media_status != mii->mii_media_status || cmd == MII_MEDIACHG) {
- msk_miibus_statchg (mPhySoftc->mmd->port);
- msk_miibus_statchg (sc_phy->sc_if); sc->mii_media_active = mii->mii_media_active; sc->mii_media_status = mii->mii_media_status; }
@@ -352,31 +371,37 @@ mii_phy_update ( void e1000phy_tick (
- VOID
- struct e1000phy_softc *sc_phy ) {
- e1000phy_service (MII_TICK);
- e1000phy_service (sc_phy, MII_TICK); }
void e1000phy_mediachg (
- VOID
- struct e1000phy_softc *sc_phy ) {
- struct mii_data *mii = mPhySoftc->mii_sc.mii_pdata;
- struct mii_data *mii;
- mii = sc_phy->mii_sc.mii_pdata;
- mii->mii_media_status = 0; mii->mii_media_active = IFM_NONE;
- e1000phy_service (MII_MEDIACHG);
- e1000phy_service (sc_phy, MII_MEDIACHG); }
static void e1000phy_service (
- INTN cmd
- )
- struct e1000phy_softc *sc_phy,
- INTN cmd
- ) {
- struct mii_softc *sc = &mPhySoftc->mii_sc;
- struct mii_softc *sc; INTN reg;
- sc = &sc_phy->mii_sc;
- switch (cmd) { case MII_POLLSTAT: break;
@@ -385,7 +410,7 @@ e1000phy_service ( // // Always try to auto-negotiate //
e1000phy_mii_phy_auto ();
e1000phy_mii_phy_auto (sc_phy); break;case MII_TICK: @@ -393,7 +418,7 @@ e1000phy_service ( * check for link. * Read the status register twice; Link Status is latch-low. */
reg = PHY_READ (mPhySoftc, E1000_SR) | PHY_READ (mPhySoftc, E1000_SR);
reg = PHY_READ (sc_phy, E1000_SR) | PHY_READ (sc_phy, E1000_SR); if (reg & E1000_SR_LINK_STATUS) { sc->mii_ticks = 0; break;@@ -411,24 +436,25 @@ e1000phy_service ( // Restart the auto-negotiation // sc->mii_ticks = 0;
e1000phy_reset (sc);e1000phy_mii_phy_auto ();
e1000phy_reset (sc_phy);e1000phy_mii_phy_auto (sc_phy); break;/* Update the media status. */
- e1000phy_status (sc);
- e1000phy_status (sc_phy);
/* Callback if something changed. */
- mii_phy_update (cmd);
- mii_phy_update (sc_phy, cmd); }
static void e1000phy_status (
- struct mii_softc *sc
- struct e1000phy_softc *sc_phy ) {
- struct mii_data *mii = sc->mii_pdata;
- struct mii_softc *sc;
- struct mii_data *mii; INTN bmcr; INTN bmsr; INTN gsr;
@@ -436,12 +462,15 @@ e1000phy_status ( INTN ar; INTN lpar;
- sc = &sc_phy->mii_sc;
- mii = sc->mii_pdata;
- mii->mii_media_status = IFM_AVALID; mii->mii_media_active = IFM_ETHER;
- bmsr = PHY_READ (mPhySoftc, E1000_SR) | PHY_READ (mPhySoftc, E1000_SR);
- bmcr = PHY_READ (mPhySoftc, E1000_CR);
- ssr = PHY_READ (mPhySoftc, E1000_SSR);
- bmsr = PHY_READ (sc_phy, E1000_SR) | PHY_READ (sc_phy, E1000_SR);
- bmcr = PHY_READ (sc_phy, E1000_CR);
- ssr = PHY_READ (sc_phy, E1000_SSR);
if (bmsr & E1000_SR_LINK_STATUS) { DEBUG ((EFI_D_NET, "Marvell Yukon: e1000phy_status, link up\n")); @@ -489,8 +518,8 @@ e1000phy_status ( } if ((sc->mii_flags & MIIF_HAVEFIBER) == 0) {
- ar = PHY_READ (mPhySoftc, E1000_AR);
- lpar = PHY_READ (mPhySoftc, E1000_LPAR);
- ar = PHY_READ (sc_phy, E1000_AR);
- lpar = PHY_READ (sc_phy, E1000_LPAR); /* FLAG0==rx-flow-control FLAG1==tx-flow-control */ if ((ar & E1000_AR_PAUSE) && (lpar & E1000_LPAR_PAUSE)) { mii->mii_media_active |= IFM_FLAG0 | IFM_FLAG1;
@@ -506,8 +535,8 @@ e1000phy_status ( /* FLAG2 : local PHY resolved to MASTER */ if ((IFM_SUBTYPE (mii->mii_media_active) == IFM_1000_T) || (IFM_SUBTYPE (mii->mii_media_active) == IFM_1000_SX)) {
- PHY_READ (mPhySoftc, E1000_1GSR);
- gsr = PHY_READ (mPhySoftc, E1000_1GSR);
- PHY_READ (sc_phy, E1000_1GSR);
- gsr = PHY_READ (sc_phy, E1000_1GSR); if ((gsr & E1000_1GSR_MS_CONFIG_RES) != 0) { mii->mii_media_active |= IFM_FLAG2; }
@@ -516,29 +545,29 @@ e1000phy_status ( static void e1000phy_mii_phy_auto (
- VOID
- struct e1000phy_softc *sc_phy ) { struct mii_softc *sc; UINT16 reg;
DEBUG ((EFI_D_NET, "Marvell Yukon: e1000phy_mii_phy_auto negotiation started\n"));
- sc = &mPhySoftc->mii_sc;
- sc = &sc_phy->mii_sc; if ((sc->mii_flags & MIIF_HAVEFIBER) == 0) {
- reg = PHY_READ (mPhySoftc, E1000_AR);
- reg = PHY_READ (sc_phy, E1000_AR); reg |= E1000_AR_10T | E1000_AR_10T_FD | E1000_AR_100TX | E1000_AR_100TX_FD | E1000_AR_PAUSE | E1000_AR_ASM_DIR;
- PHY_WRITE (mPhySoftc, E1000_AR, reg | E1000_AR_SELECTOR_FIELD);
- PHY_WRITE (sc_phy, E1000_AR, reg | E1000_AR_SELECTOR_FIELD); } else {
- PHY_WRITE (mPhySoftc, E1000_AR, E1000_FA_1000X_FD | E1000_FA_1000X | E1000_FA_SYM_PAUSE | E1000_FA_ASYM_PAUSE);
- PHY_WRITE (sc_phy, E1000_AR, E1000_FA_1000X_FD | E1000_FA_1000X | E1000_FA_SYM_PAUSE | E1000_FA_ASYM_PAUSE); }
if ((sc->mii_extcapabilities & (E1000_ESR_1000T_FD | E1000_ESR_1000T)) != 0) {
- PHY_WRITE (mPhySoftc, E1000_1GCR, E1000_1GCR_1000T_FD | E1000_1GCR_1000T);
- PHY_WRITE (sc_phy, E1000_1GCR, E1000_1GCR_1000T_FD | E1000_1GCR_1000T); }
- PHY_WRITE (mPhySoftc, E1000_CR, E1000_CR_AUTO_NEG_ENABLE | E1000_CR_RESTART_AUTO_NEG);
- PHY_WRITE (sc_phy, E1000_CR, E1000_CR_AUTO_NEG_ENABLE | E1000_CR_RESTART_AUTO_NEG); }
// diff --git a/Drivers/Net/MarvellYukonDxe/e1000phyreg.h b/Drivers/Net/MarvellYukonDxe/e1000phyreg.h index a87b1f1..e53ca2a 100644 --- a/Drivers/Net/MarvellYukonDxe/e1000phyreg.h +++ b/Drivers/Net/MarvellYukonDxe/e1000phyreg.h @@ -82,6 +82,9 @@
- Marvell E1000 PHY registers
*/ +#ifndef _E1000_PHYREG_H_ +#define _E1000_PHYREG_H_
- #define E1000_MAX_REG_ADDRESS 0x1F
#define E1000_CR 0x00 /* control register */ @@ -396,3 +399,12 @@ #define E1000_ESSR_GMII_FIBER 0x0007 #define E1000_ESSR_TBI_COPPER 0x000d #define E1000_ESSR_TBI_FIBER 0x0005
+struct e1000phy_softc {
- struct mii_softc mii_sc;
- INTN mii_model;
- const struct msk_mii_data *mmd;
- void *sc_if; /* parent logical controller */
+};
+#endif /* _E1000_PHYREG_H_ */ diff --git a/Drivers/Net/MarvellYukonDxe/if_msk.c b/Drivers/Net/MarvellYukonDxe/if_msk.c index d23f893..ca130cd 100644 --- a/Drivers/Net/MarvellYukonDxe/if_msk.c +++ b/Drivers/Net/MarvellYukonDxe/if_msk.c @@ -121,12 +121,6 @@ #include "if_mskreg.h" #include "if_msk.h" -// -// Global Variables -// -static EFI_PCI_IO_PROTOCOL *mPciIo; -static struct msk_softc *mSoftc;
- #define MSK_CSUM_FEATURES (CSUM_TCP | CSUM_UDP)
/* @@ -189,32 +183,34 @@ static const CHAR8 *model_name[] = { // // Forward declarations // -static VOID mskc_setup_rambuffer (VOID); -static VOID mskc_reset (VOID); +static VOID mskc_setup_rambuffer (struct msk_softc *); +static VOID mskc_reset (struct msk_softc *); -static EFI_STATUS msk_attach (INT32); -static VOID msk_detach (INT32); +EFI_STATUS mskc_attach_if (struct msk_if_softc *, UINTN); +VOID mskc_detach_if (struct msk_if_softc *); static VOID mskc_tick (IN EFI_EVENT, IN VOID*); -static VOID msk_intr (VOID); +static VOID msk_intr (struct msk_softc *); static VOID msk_intr_phy (struct msk_if_softc *); static VOID msk_intr_gmac (struct msk_if_softc *); static __inline VOID msk_rxput (struct msk_if_softc *); -static INTN msk_handle_events (VOID); +static INTN msk_handle_events (struct msk_softc *); static VOID msk_handle_hwerr (struct msk_if_softc *, UINT32); -static VOID msk_intr_hwerr (VOID); +static VOID msk_intr_hwerr (struct msk_softc *); static VOID msk_rxeof (struct msk_if_softc *, UINT32, UINT32, INTN); static VOID msk_txeof (struct msk_if_softc *, INTN); static EFI_STATUS msk_encap (struct msk_if_softc *, MSK_SYSTEM_BUF *); -static VOID msk_start (INT32); -static VOID msk_set_prefetch (INTN, EFI_PHYSICAL_ADDRESS, UINT32); +static VOID msk_start (struct msk_if_softc *); +static VOID msk_set_prefetch (struct msk_if_softc *, INTN, EFI_PHYSICAL_ADDRESS, UINT32); static VOID msk_set_rambuffer (struct msk_if_softc *); static VOID msk_set_tx_stfwd (struct msk_if_softc *); static EFI_STATUS msk_init (struct msk_if_softc *); -static VOID msk_stop (struct msk_if_softc *); +VOID mskc_stop_if (struct msk_if_softc *); static VOID msk_phy_power (struct msk_softc *, INTN); -static EFI_STATUS msk_status_dma_alloc (VOID); -static VOID msk_status_dma_free (VOID); +INTN msk_phy_readreg (struct msk_if_softc *, INTN); +INTN msk_phy_writereg (struct msk_if_softc *, INTN, INTN); +static EFI_STATUS msk_status_dma_alloc (struct msk_softc *); +static VOID msk_status_dma_free (struct msk_softc *); static EFI_STATUS msk_txrx_dma_alloc (struct msk_if_softc *); static VOID msk_txrx_dma_free (struct msk_if_softc *); static EFI_STATUS msk_init_rx_ring (struct msk_if_softc *); @@ -232,6 +228,12 @@ static VOID msk_setvlan (struct msk_if_softc *); static VOID msk_stats_clear (struct msk_if_softc *); static VOID msk_stats_update (struct msk_if_softc *); +static VOID clear_pci_errors (struct msk_softc *);
+EFI_STATUS e1000_probe_and_attach (struct mii_data *, const struct msk_mii_data *, VOID *, VOID **); +void e1000phy_tick (VOID *); +void e1000phy_mediachg (VOID *); +EFI_STATUS e1000phy_detach (VOID *); // // Functions @@ -239,20 +241,25 @@ static VOID msk_stats_update (struct msk_if_softc *); INTN msk_phy_readreg (
- INTN port,
- INTN reg
- struct msk_if_softc *sc_if,
- INTN reg ) { INTN i; INTN val;
- INTN port;
- struct msk_softc *sc;
- GMAC_WRITE_2 (mSoftc, port, GM_SMI_CTRL, GM_SMI_CT_PHY_AD(PHY_ADDR_MARV) | GM_SMI_CT_REG_AD(reg) | GM_SMI_CT_OP_RD);
- sc = sc_if->msk_softc;
- port = sc_if->msk_md.port;
- GMAC_WRITE_2 (sc, port, GM_SMI_CTRL, GM_SMI_CT_PHY_AD(PHY_ADDR_MARV) | GM_SMI_CT_REG_AD(reg) | GM_SMI_CT_OP_RD);
for (i = 0; i < MSK_TIMEOUT; i++) { gBS->Stall (1);
- val = GMAC_READ_2 (mSoftc, port, GM_SMI_CTRL);
- val = GMAC_READ_2 (sc, port, GM_SMI_CTRL); if ((val & GM_SMI_CT_RD_VAL) != 0) {
val = GMAC_READ_2 (mSoftc, port, GM_SMI_DATA);
val = GMAC_READ_2 (sc, port, GM_SMI_DATA); break; }@@ -267,18 +274,23 @@ msk_phy_readreg ( INTN msk_phy_writereg (
- INTN port,
- struct msk_if_softc *sc_if, INTN reg, INTN val ) { INTN i;
- INTN port;
- struct msk_softc *sc;
- sc = sc_if->msk_softc;
- port = sc_if->msk_md.port;
- GMAC_WRITE_2 (mSoftc, port, GM_SMI_DATA, val);
- GMAC_WRITE_2 (mSoftc, port, GM_SMI_CTRL, GM_SMI_CT_PHY_AD(PHY_ADDR_MARV) | GM_SMI_CT_REG_AD(reg));
- GMAC_WRITE_2 (sc, port, GM_SMI_DATA, val);
- GMAC_WRITE_2 (sc, port, GM_SMI_CTRL, GM_SMI_CT_PHY_AD(PHY_ADDR_MARV) | GM_SMI_CT_REG_AD(reg)); for (i = 0; i < MSK_TIMEOUT; i++) { gBS->Stall (1);
- if ((GMAC_READ_2 (mSoftc, port, GM_SMI_CTRL) & GM_SMI_CT_BUSY) == 0) {
- if ((GMAC_READ_2 (sc, port, GM_SMI_CTRL) & GM_SMI_CT_BUSY) == 0) { break; } }
@@ -291,13 +303,17 @@ msk_phy_writereg ( VOID msk_miibus_statchg (
- INTN port
- struct msk_if_softc *sc_if ) {
- struct msk_if_softc *sc_if = mSoftc->msk_if[port];
- struct mii_data *mii = &sc_if->mii_d;
- struct mii_data *mii; UINT32 gmac;
- UINTN port;
- struct msk_softc *sc;
- sc = sc_if->msk_softc;
- port = sc_if->msk_md.port;
- mii = &sc_if->mii_d; sc_if->msk_flags &= ~MSK_FLAG_LINK;
if ((mii->mii_media_status & (IFM_AVALID | IFM_ACTIVE)) == (IFM_AVALID | IFM_ACTIVE)) { @@ -325,7 +341,7 @@ msk_miibus_statchg ( // Enable Tx FIFO Underrun DEBUG ((EFI_D_NET, "Marvell Yukon: msk_miibus_statchg, link up\n"));
- CSR_WRITE_1 (mSoftc, MR_ADDR (port, GMAC_IRQ_MSK), GM_IS_TX_FF_UR | GM_IS_RX_FF_OR);
- CSR_WRITE_1 (sc, MR_ADDR (port, GMAC_IRQ_MSK), GM_IS_TX_FF_UR | GM_IS_RX_FF_OR); // // Because mii(4) notify msk (4) that it detected link status // change, there is no need to enable automatic
@@ -358,33 +374,33 @@ msk_miibus_statchg ( gmac |= GM_GPCR_FC_RX_DIS | GM_GPCR_FC_TX_DIS; } gmac |= GM_GPCR_RX_ENA | GM_GPCR_TX_ENA;
- GMAC_WRITE_2 (mSoftc, port, GM_GP_CTRL, gmac);
- GMAC_WRITE_2 (sc, port, GM_GP_CTRL, gmac); // Read again to ensure writing
- GMAC_READ_2 (mSoftc, port, GM_GP_CTRL);
- GMAC_READ_2 (sc, port, GM_GP_CTRL); gmac = GMC_PAUSE_OFF; if ((IFM_OPTIONS (mii->mii_media_active) & IFM_FDX) != 0) { if ((IFM_OPTIONS (mii->mii_media_active) & IFM_FLAG0) != 0) { gmac = GMC_PAUSE_ON; } }
- CSR_WRITE_4 (mSoftc, MR_ADDR (port, GMAC_CTRL), gmac);
- CSR_WRITE_4 (sc, MR_ADDR (port, GMAC_CTRL), gmac);
// Enable PHY interrupt for FIFO underrun/overflow
- msk_phy_writereg (port, PHY_MARV_INT_MASK, PHY_M_IS_FIFO_ERROR);
- msk_phy_writereg (sc_if, PHY_MARV_INT_MASK, PHY_M_IS_FIFO_ERROR); } else { // // Link state changed to down. // Disable PHY interrupts. // DEBUG ((EFI_D_NET, "Marvell Yukon: msk_miibus_statchg, link down\n"));
- msk_phy_writereg (port, PHY_MARV_INT_MASK, 0);
- msk_phy_writereg (sc_if, PHY_MARV_INT_MASK, 0); // Disable Rx/Tx MAC
- gmac = GMAC_READ_2 (mSoftc, port, GM_GP_CTRL);
- gmac = GMAC_READ_2 (sc, port, GM_GP_CTRL); if ((GM_GPCR_RX_ENA | GM_GPCR_TX_ENA) != 0) { gmac &= ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA);
GMAC_WRITE_2 (mSoftc, port, GM_GP_CTRL, gmac);
GMAC_WRITE_2 (sc, port, GM_GP_CTRL, gmac); // Read again to ensure writing
GMAC_READ_2 (mSoftc, port, GM_GP_CTRL);
GMAC_READ_2 (sc, port, GM_GP_CTRL); }@@ -418,12 +434,13 @@ ether_crc32_be ( VOID mskc_rxfilter (
- struct msk_if_softc *sc_if, UINT32 FilterFlags, UINTN MCastFilterCnt, EFI_MAC_ADDRESS *MCastFilter ) {
- msk_rxfilter (mSoftc->msk_if[MSK_PORT_A], FilterFlags, MCastFilterCnt, MCastFilter);
- msk_rxfilter (sc_if, FilterFlags, MCastFilterCnt, MCastFilter); }
static VOID @@ -437,10 +454,14 @@ msk_rxfilter ( UINT32 mchash[2]; UINT32 crc; UINT16 mode;
- INTN port = sc_if->msk_md.port;
- INTN port;
- struct msk_softc *sc;
- sc = sc_if->msk_softc;
- port = sc_if->msk_md.port;
gBS->SetMem (mchash, sizeof (mchash), 0);
- mode = GMAC_READ_2 (mSoftc, port, GM_RX_CTRL);
- mode = GMAC_READ_2 (sc, port, GM_RX_CTRL); if ((FilterFlags & EFI_SIMPLE_NETWORK_RECEIVE_PROMISCUOUS) != 0) { mode &= ~(GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA); }
@@ -462,11 +483,11 @@ msk_rxfilter ( } }
- GMAC_WRITE_2 (mSoftc, port, GM_MC_ADDR_H1, mchash[0] & 0xffff );
- GMAC_WRITE_2 (mSoftc, port, GM_MC_ADDR_H2, (mchash[0] >> 16) & 0xffff );
- GMAC_WRITE_2 (mSoftc, port, GM_MC_ADDR_H3, mchash[1] & 0xffff );
- GMAC_WRITE_2 (mSoftc, port, GM_MC_ADDR_H4, (mchash[1] >> 16) & 0xffff );
- GMAC_WRITE_2 (mSoftc, port, GM_RX_CTRL, mode );
- GMAC_WRITE_2 (sc, port, GM_MC_ADDR_H1, mchash[0] & 0xffff );
- GMAC_WRITE_2 (sc, port, GM_MC_ADDR_H2, (mchash[0] >> 16) & 0xffff );
- GMAC_WRITE_2 (sc, port, GM_MC_ADDR_H3, mchash[1] & 0xffff );
- GMAC_WRITE_2 (sc, port, GM_MC_ADDR_H4, (mchash[1] >> 16) & 0xffff );
- GMAC_WRITE_2 (sc, port, GM_RX_CTRL, mode ); }
static @@ -478,8 +499,8 @@ msk_setvlan ( // // Disable automatic VLAN tagging/stripping //
- CSR_WRITE_4 (mSoftc, MR_ADDR (sc_if->msk_md.port, RX_GMF_CTRL_T), RX_VLAN_STRIP_OFF);
- CSR_WRITE_4 (mSoftc, MR_ADDR (sc_if->msk_md.port, TX_GMF_CTRL_T), TX_VLAN_TAG_OFF);
- CSR_WRITE_4 (sc_if->msk_softc, MR_ADDR (sc_if->msk_md.port, RX_GMF_CTRL_T), RX_VLAN_STRIP_OFF);
- CSR_WRITE_4 (sc_if->msk_softc, MR_ADDR (sc_if->msk_md.port, TX_GMF_CTRL_T), TX_VLAN_TAG_OFF); }
static @@ -520,7 +541,7 @@ msk_init_rx_ring ( // Update prefetch unit. sc_if->msk_cdata.msk_rx_prod = MSK_RX_RING_CNT - 1;
- CSR_WRITE_2 (mSoftc, Y2_PREF_Q_ADDR (sc_if->msk_rxq, PREF_UNIT_PUT_IDX_REG), sc_if->msk_cdata.msk_rx_prod);
- CSR_WRITE_2 (sc_if->msk_softc, Y2_PREF_Q_ADDR (sc_if->msk_rxq, PREF_UNIT_PUT_IDX_REG), sc_if->msk_cdata.msk_rx_prod);
return EFI_SUCCESS; } @@ -589,8 +610,10 @@ msk_newbuf ( VOID *Buffer; VOID *Mapping; EFI_PHYSICAL_ADDRESS PhysAddr;
- EFI_PCI_IO_PROTOCOL *PciIo; EFI_STATUS Status;
- PciIo = sc_if->msk_softc->PciIo; Length = MAX_SUPPORTED_PACKET_SIZE;
rxd = &sc_if->msk_cdata.msk_rxdesc[idx]; @@ -601,7 +624,7 @@ msk_newbuf ( } gBS->SetMem (Buffer, Length, 0);
- Status = mPciIo->Map (mPciIo, EfiPciIoOperationBusMasterWrite, Buffer, &Length, &PhysAddr, &Mapping);
- Status = PciIo->Map (PciIo, EfiPciIoOperationBusMasterWrite, Buffer, &Length, &PhysAddr, &Mapping); if (EFI_ERROR (Status)) { gBS->FreePool (Buffer); return Status;
@@ -663,38 +686,38 @@ mskc_probe ( static VOID mskc_setup_rambuffer (
- VOID
- struct msk_softc *sc ) { INTN next; INTN i;
/* Get adapter SRAM size. */
- mSoftc->msk_ramsize = CSR_READ_1 (mSoftc, B2_E_0) * 4;
- DEBUG ((EFI_D_NET, "Marvell Yukon: RAM buffer size : %dKB\n", mSoftc->msk_ramsize));
- if (mSoftc->msk_ramsize == 0) {
- sc->msk_ramsize = CSR_READ_1 (sc, B2_E_0) * 4;
- DEBUG ((EFI_D_NET, "Marvell Yukon: RAM buffer size : %dKB\n", sc->msk_ramsize));
- if (sc->msk_ramsize == 0) { return; }
- mSoftc->msk_pflags |= MSK_FLAG_RAMBUF;
- sc->msk_pflags |= MSK_FLAG_RAMBUF; /*
*/
- Give receiver 2/3 of memory and round down to the multiple
- of 1024. Tx/Rx RAM buffer size of Yukon II shoud be multiple
- of 1024.
- mSoftc->msk_rxqsize = (((mSoftc->msk_ramsize * 1024 * 2) / 3) / 1024) * 1024;
- mSoftc->msk_txqsize = (mSoftc->msk_ramsize * 1024) - mSoftc->msk_rxqsize;
- for (i = 0, next = 0; i < mSoftc->msk_num_port; i++) {
- mSoftc->msk_rxqstart[i] = next;
- mSoftc->msk_rxqend[i] = next + mSoftc->msk_rxqsize - 1;
- next = mSoftc->msk_rxqend[i] + 1;
- mSoftc->msk_txqstart[i] = next;
- mSoftc->msk_txqend[i] = next + mSoftc->msk_txqsize - 1;
- next = mSoftc->msk_txqend[i] + 1;
- sc->msk_rxqsize = (((sc->msk_ramsize * 1024 * 2) / 3) / 1024) * 1024;
- sc->msk_txqsize = (sc->msk_ramsize * 1024) - sc->msk_rxqsize;
- for (i = 0, next = 0; i < sc->msk_num_port; i++) {
- sc->msk_rxqstart[i] = next;
- sc->msk_rxqend[i] = next + sc->msk_rxqsize - 1;
- next = sc->msk_rxqend[i] + 1;
- sc->msk_txqstart[i] = next;
- sc->msk_txqend[i] = next + sc->msk_txqsize - 1;
- next = sc->msk_txqend[i] + 1; DEBUG ((EFI_D_NET, "Marvell Yukon: Port %d : Rx Queue %dKB(0x%08x:0x%08x)\n", i,
mSoftc->msk_rxqsize / 1024, mSoftc->msk_rxqstart[i], mSoftc->msk_rxqend[i]));
sc->msk_rxqsize / 1024, sc->msk_rxqstart[i], sc->msk_rxqend[i])); DEBUG ((EFI_D_NET, "Marvell Yukon: Port %d : Tx Queue %dKB(0x%08x:0x%08x)\n", i,
mSoftc->msk_txqsize / 1024, mSoftc->msk_txqstart[i], mSoftc->msk_txqend[i]));
sc->msk_txqsize / 1024, sc->msk_txqstart[i], sc->msk_txqend[i]));@@ -811,15 +834,18 @@ msk_phy_power ( static VOID clear_pci_errors (
- VOID
- struct msk_softc *sc ) { EFI_STATUS Status; UINT16 val;
- EFI_PCI_IO_PROTOCOL *PciIo;
- PciIo = sc->PciIo;
// Clear all error bits in the PCI status register.
- Status = mPciIo->Pci.Read (
mPciIo,
- Status = PciIo->Pci.Read (
PciIo, EfiPciIoWidthUint16, PCI_PRIMARY_STATUS_OFFSET, 1,@@ -828,11 +854,11 @@ clear_pci_errors ( if (EFI_ERROR (Status)) { DEBUG ((EFI_D_ERROR, "Marvell Yukon: Warning - Reading PCI Status failed: %r", Status)); }
- CSR_WRITE_1 (mSoftc, B2_TST_CTRL1, TST_CFG_WRITE_ON);
- CSR_WRITE_1 (sc, B2_TST_CTRL1, TST_CFG_WRITE_ON); val |= PCIM_STATUS_PERR | PCIM_STATUS_SERR | PCIM_STATUS_RMABORT | PCIM_STATUS_RTABORT | PCIM_STATUS_PERRREPORT;
- Status = mPciIo->Pci.Write (
mPciIo,
- Status = PciIo->Pci.Write (
PciIo, EfiPciIoWidthUint16, PCI_PRIMARY_STATUS_OFFSET, 1,@@ -841,13 +867,13 @@ clear_pci_errors ( if (EFI_ERROR (Status)) { DEBUG ((EFI_D_ERROR, "Marvell Yukon: Warning - Writing PCI Status failed: %r", Status)); }
- CSR_WRITE_2 (mSoftc, B0_CTST, CS_MRST_CLR);
- CSR_WRITE_2 (sc, B0_CTST, CS_MRST_CLR); }
static VOID mskc_reset (
- VOID
- struct msk_softc *sc ) { EFI_STATUS Status;
@@ -855,44 +881,47 @@ mskc_reset ( UINT16 status; UINT32 val; INTN i;
- EFI_PCI_IO_PROTOCOL *PciIo;
- CSR_WRITE_2 (mSoftc, B0_CTST, CS_RST_CLR);
- PciIo = sc->PciIo;
- CSR_WRITE_2 (sc, B0_CTST, CS_RST_CLR);
// Disable ASF
- if (mSoftc->msk_hw_id == CHIP_ID_YUKON_EX) {
- status = CSR_READ_2 (mSoftc, B28_Y2_ASF_HCU_CCSR);
- if (sc->msk_hw_id == CHIP_ID_YUKON_EX) {
- status = CSR_READ_2 (sc, B28_Y2_ASF_HCU_CCSR); // Clear AHB bridge & microcontroller reset status &= ~(Y2_ASF_HCU_CCSR_AHB_RST | Y2_ASF_HCU_CCSR_CPU_RST_MODE); // Clear ASF microcontroller state status &= ~ Y2_ASF_HCU_CCSR_UC_STATE_MSK;
- CSR_WRITE_2 (mSoftc, B28_Y2_ASF_HCU_CCSR, status);
- CSR_WRITE_2 (sc, B28_Y2_ASF_HCU_CCSR, status); } else {
- CSR_WRITE_1 (mSoftc, B28_Y2_ASF_STAT_CMD, Y2_ASF_RESET);
- CSR_WRITE_1 (sc, B28_Y2_ASF_STAT_CMD, Y2_ASF_RESET); }
- CSR_WRITE_2 (mSoftc, B0_CTST, Y2_ASF_DISABLE);
- CSR_WRITE_2 (sc, B0_CTST, Y2_ASF_DISABLE);
// // Since we disabled ASF, S/W reset is required for Power Management. //
- CSR_WRITE_2 (mSoftc, B0_CTST, CS_RST_SET);
- CSR_WRITE_2 (mSoftc, B0_CTST, CS_RST_CLR);
- CSR_WRITE_2 (sc, B0_CTST, CS_RST_SET);
- CSR_WRITE_2 (sc, B0_CTST, CS_RST_CLR);
- clear_pci_errors ();
- switch (mSoftc->msk_bustype) {
- clear_pci_errors (sc);
- switch (sc->msk_bustype) { case MSK_PEX_BUS: // Clear all PEX errors
CSR_PCI_WRITE_4 (mSoftc, PEX_UNC_ERR_STAT, 0xffffffff);val = CSR_PCI_READ_4 (mSoftc, PEX_UNC_ERR_STAT);
CSR_PCI_WRITE_4 (sc, PEX_UNC_ERR_STAT, 0xffffffff);val = CSR_PCI_READ_4 (sc, PEX_UNC_ERR_STAT); if ((val & PEX_RX_OV) != 0) {
mSoftc->msk_intrmask &= ~Y2_IS_HW_ERR;mSoftc->msk_intrhwemask &= ~Y2_IS_PCI_EXP;
sc->msk_intrmask &= ~Y2_IS_HW_ERR;sc->msk_intrhwemask &= ~Y2_IS_PCI_EXP; } break; case MSK_PCI_BUS: case MSK_PCIX_BUS: // Set Cache Line Size to 2 (8bytes) if configured to 0
Status = mPciIo->Pci.Read (mPciIo,
Status = PciIo->Pci.Read (PciIo, EfiPciIoWidthUint8, PCI_CACHELINE_SIZE_OFFSET, 1,@@ -903,8 +932,8 @@ mskc_reset ( } if (val == 0) { val = 2;
Status = mPciIo->Pci.Write (mPciIo,
Status = PciIo->Pci.Write (PciIo, EfiPciIoWidthUint8, PCI_CACHELINE_SIZE_OFFSET, 1,@@ -914,9 +943,9 @@ mskc_reset ( DEBUG ((EFI_D_ERROR, "Marvell Yukon: Warning - Writing PCI cache line size failed: %r", Status)); } }
if (mSoftc->msk_bustype == MSK_PCIX_BUS) {Status = mPciIo->Pci.Read (mPciIo,
if (sc->msk_bustype == MSK_PCIX_BUS) {Status = PciIo->Pci.Read (PciIo, EfiPciIoWidthUint32, PCI_OUR_REG_1, 1,@@ -926,8 +955,8 @@ mskc_reset ( DEBUG ((EFI_D_ERROR, "Marvell Yukon: Warning - Reading Our Reg 1 failed: %r", Status)); } val |= PCI_CLS_OPT;
Status = mPciIo->Pci.Write (mPciIo,
Status = PciIo->Pci.Write (PciIo, EfiPciIoWidthUint32, PCI_OUR_REG_1, 1,@@ -941,130 +970,128 @@ mskc_reset ( } // Set PHY power state
- msk_phy_power (mSoftc, MSK_PHY_POWERUP);
- msk_phy_power (sc, MSK_PHY_POWERUP);
// Reset GPHY/GMAC Control
- for (i = 0; i < mSoftc->msk_num_port; i++) {
- for (i = 0; i < sc->msk_num_port; i++) { // GPHY Control reset
- CSR_WRITE_4 (mSoftc, MR_ADDR (i, GPHY_CTRL), GPC_RST_SET);
- CSR_WRITE_4 (mSoftc, MR_ADDR (i, GPHY_CTRL), GPC_RST_CLR);
- if (mSoftc->msk_hw_id == CHIP_ID_YUKON_UL_2) {
- CSR_WRITE_4 (sc, MR_ADDR (i, GPHY_CTRL), GPC_RST_SET);
- CSR_WRITE_4 (sc, MR_ADDR (i, GPHY_CTRL), GPC_RST_CLR);
- if (sc->msk_hw_id == CHIP_ID_YUKON_UL_2) { // Magic value observed under Linux.
CSR_WRITE_4 (mSoftc, MR_ADDR (i, GPHY_CTRL), 0x00105226);
CSR_WRITE_4 (sc, MR_ADDR (i, GPHY_CTRL), 0x00105226); } // GMAC Control reset
- CSR_WRITE_4 (mSoftc, MR_ADDR (i, GMAC_CTRL), GMC_RST_SET);
- CSR_WRITE_4 (mSoftc, MR_ADDR (i, GMAC_CTRL), GMC_RST_CLR);
- CSR_WRITE_4 (mSoftc, MR_ADDR (i, GMAC_CTRL), GMC_F_LOOPB_OFF);
- if (mSoftc->msk_hw_id == CHIP_ID_YUKON_EX) {
CSR_WRITE_4 (mSoftc, MR_ADDR (i, GMAC_CTRL), GMC_BYP_MACSECRX_ON | GMC_BYP_MACSECTX_ON | GMC_BYP_RETR_ON);
- CSR_WRITE_4 (sc, MR_ADDR (i, GMAC_CTRL), GMC_RST_SET);
- CSR_WRITE_4 (sc, MR_ADDR (i, GMAC_CTRL), GMC_RST_CLR);
- CSR_WRITE_4 (sc, MR_ADDR (i, GMAC_CTRL), GMC_F_LOOPB_OFF);
- if (sc->msk_hw_id == CHIP_ID_YUKON_EX) {
CSR_WRITE_4 (sc, MR_ADDR (i, GMAC_CTRL), GMC_BYP_MACSECRX_ON | GMC_BYP_MACSECTX_ON | GMC_BYP_RETR_ON); }
- if ((mSoftc->msk_hw_id == CHIP_ID_YUKON_OPT) && (mSoftc->msk_hw_rev == 0)) {
- if ((sc->msk_hw_id == CHIP_ID_YUKON_OPT) && (sc->msk_hw_rev == 0)) { // Disable PCIe PHY powerdown (reg 0x80, bit7)
- CSR_WRITE_4 (mSoftc, Y2_PEX_PHY_DATA, (0x0080 << 16) | 0x0080);
- CSR_WRITE_4 (sc, Y2_PEX_PHY_DATA, (0x0080 << 16) | 0x0080); }
- CSR_WRITE_1 (mSoftc, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
- CSR_WRITE_1 (sc, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
// LED On
- CSR_WRITE_2 (mSoftc, B0_CTST, Y2_LED_STAT_ON);
- CSR_WRITE_2 (sc, B0_CTST, Y2_LED_STAT_ON);
// Enable plug in go
- CSR_WRITE_2 (mSoftc, B0_CTST, Y_ULTRA_2_PLUG_IN_GO_EN);
- CSR_WRITE_2 (sc, B0_CTST, Y_ULTRA_2_PLUG_IN_GO_EN);
// Clear TWSI IRQ
- CSR_WRITE_4 (mSoftc, B2_I2C_IRQ, I2C_CLR_IRQ);
- CSR_WRITE_4 (sc, B2_I2C_IRQ, I2C_CLR_IRQ);
// Turn off hardware timer
- CSR_WRITE_1 (mSoftc, B2_TI_CTRL, TIM_STOP);
- CSR_WRITE_1 (mSoftc, B2_TI_CTRL, TIM_CLR_IRQ);
- CSR_WRITE_1 (sc, B2_TI_CTRL, TIM_STOP);
- CSR_WRITE_1 (sc, B2_TI_CTRL, TIM_CLR_IRQ);
// Turn off descriptor polling
- CSR_WRITE_1 (mSoftc, B28_DPT_CTRL, DPT_STOP);
- CSR_WRITE_1 (sc, B28_DPT_CTRL, DPT_STOP);
// Turn off time stamps
- CSR_WRITE_1 (mSoftc, GMAC_TI_ST_CTRL, GMT_ST_STOP);
- CSR_WRITE_1 (mSoftc, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ);
- CSR_WRITE_1 (sc, GMAC_TI_ST_CTRL, GMT_ST_STOP);
- CSR_WRITE_1 (sc, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ);
// Configure timeout values
- for (i = 0; i < mSoftc->msk_num_port; i++) {
- CSR_WRITE_2 (mSoftc, SELECT_RAM_BUFFER (i, B3_RI_CTRL), RI_RST_SET);
- CSR_WRITE_2 (mSoftc, SELECT_RAM_BUFFER (i, B3_RI_CTRL), RI_RST_CLR);
- CSR_WRITE_1 (mSoftc, SELECT_RAM_BUFFER (i, B3_RI_WTO_R1), MSK_RI_TO_53);
- CSR_WRITE_1 (mSoftc, SELECT_RAM_BUFFER (i, B3_RI_WTO_XA1), MSK_RI_TO_53);
- CSR_WRITE_1 (mSoftc, SELECT_RAM_BUFFER (i, B3_RI_WTO_XS1), MSK_RI_TO_53);
- CSR_WRITE_1 (mSoftc, SELECT_RAM_BUFFER (i, B3_RI_RTO_R1), MSK_RI_TO_53);
- CSR_WRITE_1 (mSoftc, SELECT_RAM_BUFFER (i, B3_RI_RTO_XA1), MSK_RI_TO_53);
- CSR_WRITE_1 (mSoftc, SELECT_RAM_BUFFER (i, B3_RI_RTO_XS1), MSK_RI_TO_53);
- CSR_WRITE_1 (mSoftc, SELECT_RAM_BUFFER (i, B3_RI_WTO_R2), MSK_RI_TO_53);
- CSR_WRITE_1 (mSoftc, SELECT_RAM_BUFFER (i, B3_RI_WTO_XA2), MSK_RI_TO_53);
- CSR_WRITE_1 (mSoftc, SELECT_RAM_BUFFER (i, B3_RI_WTO_XS2), MSK_RI_TO_53);
- CSR_WRITE_1 (mSoftc, SELECT_RAM_BUFFER (i, B3_RI_RTO_R2), MSK_RI_TO_53);
- CSR_WRITE_1 (mSoftc, SELECT_RAM_BUFFER (i, B3_RI_RTO_XA2), MSK_RI_TO_53);
- CSR_WRITE_1 (mSoftc, SELECT_RAM_BUFFER (i, B3_RI_RTO_XS2), MSK_RI_TO_53);
- for (i = 0; i < sc->msk_num_port; i++) {
- CSR_WRITE_2 (sc, SELECT_RAM_BUFFER (i, B3_RI_CTRL), RI_RST_SET);
- CSR_WRITE_2 (sc, SELECT_RAM_BUFFER (i, B3_RI_CTRL), RI_RST_CLR);
- CSR_WRITE_1 (sc, SELECT_RAM_BUFFER (i, B3_RI_WTO_R1), MSK_RI_TO_53);
- CSR_WRITE_1 (sc, SELECT_RAM_BUFFER (i, B3_RI_WTO_XA1), MSK_RI_TO_53);
- CSR_WRITE_1 (sc, SELECT_RAM_BUFFER (i, B3_RI_WTO_XS1), MSK_RI_TO_53);
- CSR_WRITE_1 (sc, SELECT_RAM_BUFFER (i, B3_RI_RTO_R1), MSK_RI_TO_53);
- CSR_WRITE_1 (sc, SELECT_RAM_BUFFER (i, B3_RI_RTO_XA1), MSK_RI_TO_53);
- CSR_WRITE_1 (sc, SELECT_RAM_BUFFER (i, B3_RI_RTO_XS1), MSK_RI_TO_53);
- CSR_WRITE_1 (sc, SELECT_RAM_BUFFER (i, B3_RI_WTO_R2), MSK_RI_TO_53);
- CSR_WRITE_1 (sc, SELECT_RAM_BUFFER (i, B3_RI_WTO_XA2), MSK_RI_TO_53);
- CSR_WRITE_1 (sc, SELECT_RAM_BUFFER (i, B3_RI_WTO_XS2), MSK_RI_TO_53);
- CSR_WRITE_1 (sc, SELECT_RAM_BUFFER (i, B3_RI_RTO_R2), MSK_RI_TO_53);
- CSR_WRITE_1 (sc, SELECT_RAM_BUFFER (i, B3_RI_RTO_XA2), MSK_RI_TO_53);
- CSR_WRITE_1 (sc, SELECT_RAM_BUFFER (i, B3_RI_RTO_XS2), MSK_RI_TO_53); }
// Disable all interrupts
- CSR_WRITE_4 (mSoftc, B0_HWE_IMSK, 0);
- CSR_READ_4 (mSoftc, B0_HWE_IMSK);
- CSR_WRITE_4 (mSoftc, B0_IMSK, 0);
- CSR_READ_4 (mSoftc, B0_IMSK);
- CSR_WRITE_4 (sc, B0_HWE_IMSK, 0);
- CSR_READ_4 (sc, B0_HWE_IMSK);
- CSR_WRITE_4 (sc, B0_IMSK, 0);
- CSR_READ_4 (sc, B0_IMSK);
// Clear status list
- gBS->SetMem (mSoftc->msk_stat_ring, sizeof (struct msk_stat_desc) * MSK_STAT_RING_CNT, 0);
- mSoftc->msk_stat_cons = 0;
- CSR_WRITE_4 (mSoftc, STAT_CTRL, SC_STAT_RST_SET);
- CSR_WRITE_4 (mSoftc, STAT_CTRL, SC_STAT_RST_CLR);
- gBS->SetMem (sc->msk_stat_ring, sizeof (struct msk_stat_desc) * MSK_STAT_RING_CNT, 0);
- sc->msk_stat_cons = 0;
- CSR_WRITE_4 (sc, STAT_CTRL, SC_STAT_RST_SET);
- CSR_WRITE_4 (sc, STAT_CTRL, SC_STAT_RST_CLR);
// Set the status list base address
- PhysAddr = mSoftc->msk_stat_ring_paddr;
- CSR_WRITE_4 (mSoftc, STAT_LIST_ADDR_LO, MSK_ADDR_LO (PhysAddr));
- CSR_WRITE_4 (mSoftc, STAT_LIST_ADDR_HI, MSK_ADDR_HI (PhysAddr));
- PhysAddr = sc->msk_stat_ring_paddr;
- CSR_WRITE_4 (sc, STAT_LIST_ADDR_LO, MSK_ADDR_LO (PhysAddr));
- CSR_WRITE_4 (sc, STAT_LIST_ADDR_HI, MSK_ADDR_HI (PhysAddr));
// Set the status list last index
- CSR_WRITE_2 (mSoftc, STAT_LAST_IDX, MSK_STAT_RING_CNT - 1);
- if ((mSoftc->msk_hw_id == CHIP_ID_YUKON_EC) && (mSoftc->msk_hw_rev == CHIP_REV_YU_EC_A1)) {
- CSR_WRITE_2 (sc, STAT_LAST_IDX, MSK_STAT_RING_CNT - 1);
- if ((sc->msk_hw_id == CHIP_ID_YUKON_EC) && (sc->msk_hw_rev == CHIP_REV_YU_EC_A1)) { // WA for dev. #4.3
- CSR_WRITE_2 (mSoftc, STAT_TX_IDX_TH, ST_TXTH_IDX_MASK);
- CSR_WRITE_2 (sc, STAT_TX_IDX_TH, ST_TXTH_IDX_MASK); // WA for dev. #4.18
- CSR_WRITE_1 (mSoftc, STAT_FIFO_WM, 0x21);
- CSR_WRITE_1 (mSoftc, STAT_FIFO_ISR_WM, 0x07);
- CSR_WRITE_1 (sc, STAT_FIFO_WM, 0x21);
- CSR_WRITE_1 (sc, STAT_FIFO_ISR_WM, 0x07); } else {
- CSR_WRITE_2 (mSoftc, STAT_TX_IDX_TH, 0x0a);
- CSR_WRITE_1 (mSoftc, STAT_FIFO_WM, 0x10);
- if ((mSoftc->msk_hw_id == CHIP_ID_YUKON_XL) && (mSoftc->msk_hw_rev == CHIP_REV_YU_XL_A0)) {
CSR_WRITE_1 (mSoftc, STAT_FIFO_ISR_WM, 0x04);
- CSR_WRITE_2 (sc, STAT_TX_IDX_TH, 0x0a);
- CSR_WRITE_1 (sc, STAT_FIFO_WM, 0x10);
- if ((sc->msk_hw_id == CHIP_ID_YUKON_XL) && (sc->msk_hw_rev == CHIP_REV_YU_XL_A0)) {
CSR_WRITE_1 (sc, STAT_FIFO_ISR_WM, 0x04); } else {
CSR_WRITE_1 (mSoftc, STAT_FIFO_ISR_WM, 0x10);
CSR_WRITE_1 (sc, STAT_FIFO_ISR_WM, 0x10); }
- CSR_WRITE_4 (mSoftc, STAT_ISR_TIMER_INI, 0x0190);
- CSR_WRITE_4 (sc, STAT_ISR_TIMER_INI, 0x0190); } // // Use default value for STAT_ISR_TIMER_INI, STAT_LEV_TIMER_INI. //
- CSR_WRITE_4 (mSoftc, STAT_TX_TIMER_INI, MSK_USECS (mSoftc, 1000));
- CSR_WRITE_4 (sc, STAT_TX_TIMER_INI, MSK_USECS (sc, 1000));
// Enable status unit
- CSR_WRITE_4 (mSoftc, STAT_CTRL, SC_STAT_OP_ON);
- CSR_WRITE_4 (sc, STAT_CTRL, SC_STAT_OP_ON);
- CSR_WRITE_1 (mSoftc, STAT_TX_TIMER_CTRL, TIM_START);
- CSR_WRITE_1 (mSoftc, STAT_LEV_TIMER_CTRL, TIM_START);
- CSR_WRITE_1 (mSoftc, STAT_ISR_TIMER_CTRL, TIM_START);
- CSR_WRITE_1 (sc, STAT_TX_TIMER_CTRL, TIM_START);
- CSR_WRITE_1 (sc, STAT_LEV_TIMER_CTRL, TIM_START);
- CSR_WRITE_1 (sc, STAT_ISR_TIMER_CTRL, TIM_START); }
-static EFI_STATUS -msk_attach (
- INT32 Port
+mskc_attach_if (
- struct msk_if_softc *sc_if,
- UINTN Port ) {
- struct msk_if_softc *sc_if; INTN i; EFI_STATUS Status;
- sc_if = mSoftc->msk_if[Port]; sc_if->msk_md.port = Port;
- sc_if->msk_flags = mSoftc->msk_pflags;
- sc_if->msk_flags = sc_if->msk_softc->msk_pflags;
// Setup Tx/Rx queue register offsets if (Port == MSK_PORT_A) { @@ -1092,19 +1119,22 @@ msk_attach ( * use this extra address. */ for (i = 0; i < NET_ETHER_ADDR_LEN; i++) {
- sc_if->MacAddress.Addr[i] = CSR_READ_1 (mSoftc, B2_MAC_1 + (Port * 8) + i);
- sc_if->MacAddress.Addr[i] = CSR_READ_1 (sc_if->msk_softc, B2_MAC_1 + (Port * 8) + i); }
DEBUG ((EFI_D_NET,"Marvell Yukon: Mac Address %02x:%02x:%02x:%02x:%02x:%02x\n", sc_if->MacAddress.Addr[0], sc_if->MacAddress.Addr[1], sc_if->MacAddress.Addr[2], sc_if->MacAddress.Addr[3], sc_if->MacAddress.Addr[4], sc_if->MacAddress.Addr[5]));
- Status = e1000_probe_and_attach (&sc_if->mii_d, &sc_if->msk_md);
- Status = e1000_probe_and_attach (&sc_if->mii_d, &sc_if->msk_md, sc_if, &sc_if->phy_softc); if (EFI_ERROR (Status)) {
- mSoftc->msk_if[Port] = NULL;
- msk_detach (Port);
- return Status; }
- InitializeListHead (&sc_if->TransmitQueueHead);
- InitializeListHead (&sc_if->TransmitFreeQueueHead);
- InitializeListHead (&sc_if->ReceiveQueueHead);
- return (Status); }
@@ -1115,7 +1145,7 @@ msk_attach ( EFI_STATUS mskc_attach ( IN EFI_PCI_IO_PROTOCOL *PciIo,
- OUT EFI_MAC_ADDRESS *Mac
- OUT struct msk_softc **ScData ) { struct msk_mii_data *mmd;
@@ -1123,11 +1153,11 @@ mskc_attach ( UINT8 *PciBarResources; EFI_STATUS Status; struct msk_if_softc *ScIf;
- struct msk_softc *sc;
- mPciIo = PciIo; Status = gBS->AllocatePool (EfiBootServicesData, sizeof (struct msk_softc),
(VOID**) &mSoftc);
(VOID**) &sc);@@ -1135,28 +1165,29 @@ mskc_attach ( // // Save original PCI attributes //
- gBS->SetMem (mSoftc, sizeof (struct msk_softc), 0);
- Status = mPciIo->Attributes (
mPciIo,
- gBS->SetMem (sc, sizeof (struct msk_softc), 0);
- sc->PciIo = PciIo;
- Status = PciIo->Attributes (
PciIo, EfiPciIoAttributeOperationGet, 0,
&mSoftc->OriginalPciAttributes
&sc->OriginalPciAttributes );
- gBS->FreePool (mSoftc);
- gBS->FreePool (sc); return Status; }
- Status = mPciIo->Attributes (
mPciIo,
- Status = PciIo->Attributes (
PciIo, EfiPciIoAttributeOperationSupported, 0, &Supports );
- Status = mPciIo->Attributes (
mPciIo,
- Status = PciIo->Attributes (
PciIo, EfiPciIoAttributeOperationEnable, Supports | EFI_PCI_IO_ATTRIBUTE_DUAL_ADDRESS_CYCLE, NULL@@ -1167,13 +1198,13 @@ mskc_attach ( goto RESTORE_PCI_ATTRIBS; }
- Status = mPciIo->GetBarAttributes (mPciIo, 0, &Supports, (VOID**)&PciBarResources);
- Status = PciIo->GetBarAttributes (PciIo, 0, &Supports, (VOID**)&PciBarResources); if (!EFI_ERROR (Status) && (((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)PciBarResources)->Desc == ACPI_ADDRESS_SPACE_DESCRIPTOR)) { if (((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)PciBarResources)->ResType == ACPI_ADDRESS_SPACE_TYPE_MEM) { if (!(((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)PciBarResources)->SpecificFlag & ACPI_SPECFLAG_PREFETCHABLE)) {
mSoftc->RegBase = ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)PciBarResources)->AddrRangeMin;
sc->RegBase = ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)PciBarResources)->AddrRangeMin; // Should assert that Bar is 32 bits wide
DEBUG ((EFI_D_NET, "Marvell Yukon: GlobalRegistersBase = 0x%x\n", mSoftc->RegBase));
DEBUG ((EFI_D_NET, "Marvell Yukon: GlobalRegistersBase = 0x%x\n", sc->RegBase)); } else { Status = EFI_NOT_FOUND; }@@ -1186,85 +1217,85 @@ mskc_attach ( } // Clear Software Reset
- CSR_WRITE_2 (mSoftc, B0_CTST, CS_RST_CLR);
- CSR_WRITE_2 (sc, B0_CTST, CS_RST_CLR);
// Get Hardware ID & Revision
- mSoftc->msk_hw_id = CSR_READ_1 (mSoftc, B2_CHIP_ID);
- mSoftc->msk_hw_rev = (CSR_READ_1 (mSoftc, B2_MAC_CFG) >> 4) & 0x0f;
- sc->msk_hw_id = CSR_READ_1 (sc, B2_CHIP_ID);
- sc->msk_hw_rev = (CSR_READ_1 (sc, B2_MAC_CFG) >> 4) & 0x0f;
// Bail out if chip is not recognized
- if (mSoftc->msk_hw_id < CHIP_ID_YUKON_XL ||
mSoftc->msk_hw_id > CHIP_ID_YUKON_OPT ||mSoftc->msk_hw_id == CHIP_ID_YUKON_SUPR ||mSoftc->msk_hw_id == CHIP_ID_YUKON_UNKNOWN) {- DEBUG ((EFI_D_NET, "Marvell Yukon: unknown device: id=0x%02x, rev=0x%02x\n", mSoftc->msk_hw_id, mSoftc->msk_hw_rev));
- if (sc->msk_hw_id < CHIP_ID_YUKON_XL ||
sc->msk_hw_id > CHIP_ID_YUKON_OPT ||sc->msk_hw_id == CHIP_ID_YUKON_SUPR ||sc->msk_hw_id == CHIP_ID_YUKON_UNKNOWN) {- DEBUG ((EFI_D_NET, "Marvell Yukon: unknown device: id=0x%02x, rev=0x%02x\n", sc->msk_hw_id, sc->msk_hw_rev)); Status = EFI_DEVICE_ERROR; goto RESTORE_PCI_ATTRIBS; } DEBUG ((EFI_D_NET, "Marvell Yukon: Marvell Technology Group Ltd. %a Id:0x%02x Rev:0x%02x\n",
model_name[mSoftc->msk_hw_id - CHIP_ID_YUKON_XL], mSoftc->msk_hw_id, mSoftc->msk_hw_rev));
model_name[sc->msk_hw_id - CHIP_ID_YUKON_XL], sc->msk_hw_id, sc->msk_hw_rev));
- mSoftc->msk_process_limit = MSK_PROC_DEFAULT;
- mSoftc->msk_int_holdoff = MSK_INT_HOLDOFF_DEFAULT;
- sc->msk_process_limit = MSK_PROC_DEFAULT;
- sc->msk_int_holdoff = MSK_INT_HOLDOFF_DEFAULT;
// Check if MAC address is valid
- if ((CSR_READ_4 (mSoftc, B2_MAC_1) == 0) && (CSR_READ_4 (mSoftc, B2_MAC_1+4) == 0)) {
- if ((CSR_READ_4 (sc, B2_MAC_1) == 0) && (CSR_READ_4 (sc, B2_MAC_1+4) == 0)) { DEBUG ((EFI_D_NET, "Marvell Yukon: MAC address is invalid (00:00:00:00:00:00)\n")); }
// Soft reset
- CSR_WRITE_2 (mSoftc, B0_CTST, CS_RST_SET);
- CSR_WRITE_2 (mSoftc, B0_CTST, CS_RST_CLR);
- mSoftc->msk_pmd = CSR_READ_1 (mSoftc, B2_PMD_TYP);
- CSR_WRITE_2 (sc, B0_CTST, CS_RST_SET);
- CSR_WRITE_2 (sc, B0_CTST, CS_RST_CLR);
- sc->msk_pmd = CSR_READ_1 (sc, B2_PMD_TYP);
// Check number of MACs
- mSoftc->msk_num_port = 1;
- if ((CSR_READ_1 (mSoftc, B2_Y2_HW_RES) & CFG_DUAL_MAC_MSK) == CFG_DUAL_MAC_MSK) {
- if (!(CSR_READ_1 (mSoftc, B2_Y2_CLK_GATE) & Y2_STATUS_LNK2_INAC)) {
mSoftc->msk_num_port++;
- sc->msk_num_port = 1;
- if ((CSR_READ_1 (sc, B2_Y2_HW_RES) & CFG_DUAL_MAC_MSK) == CFG_DUAL_MAC_MSK) {
- if (!(CSR_READ_1 (sc, B2_Y2_CLK_GATE) & Y2_STATUS_LNK2_INAC)) {
sc->msk_num_port++; }/* Check bus type. */
- mSoftc->msk_bustype = MSK_PEX_BUS; /* Only support PCI Express */
- mSoftc->msk_expcap = 1;
- sc->msk_bustype = MSK_PEX_BUS; /* Only support PCI Express */
- sc->msk_expcap = 1;
- switch (mSoftc->msk_hw_id) {
- switch (sc->msk_hw_id) { case CHIP_ID_YUKON_EC:
mSoftc->msk_clock = 125; /* 125 MHz */mSoftc->msk_pflags |= MSK_FLAG_JUMBO;
sc->msk_clock = 125; /* 125 MHz */sc->msk_pflags |= MSK_FLAG_JUMBO; break; case CHIP_ID_YUKON_EC_U:
mSoftc->msk_clock = 125; /* 125 MHz */mSoftc->msk_pflags |= MSK_FLAG_JUMBO | MSK_FLAG_JUMBO_NOCSUM;
sc->msk_clock = 125; /* 125 MHz */sc->msk_pflags |= MSK_FLAG_JUMBO | MSK_FLAG_JUMBO_NOCSUM; break; case CHIP_ID_YUKON_EX:
mSoftc->msk_clock = 125; /* 125 MHz */mSoftc->msk_pflags |= MSK_FLAG_JUMBO | MSK_FLAG_DESCV2 | MSK_FLAG_AUTOTX_CSUM;
sc->msk_clock = 125; /* 125 MHz */sc->msk_pflags |= MSK_FLAG_JUMBO | MSK_FLAG_DESCV2 | MSK_FLAG_AUTOTX_CSUM; /* * Yukon Extreme seems to have silicon bug for * automatic Tx checksum calculation capability. */
if (mSoftc->msk_hw_rev == CHIP_REV_YU_EX_B0) {mSoftc->msk_pflags &= ~MSK_FLAG_AUTOTX_CSUM;
if (sc->msk_hw_rev == CHIP_REV_YU_EX_B0) {sc->msk_pflags &= ~MSK_FLAG_AUTOTX_CSUM; } /* * Yukon Extreme A0 could not use store-and-forward * for jumbo frames, so disable Tx checksum * offloading for jumbo frames. */
if (mSoftc->msk_hw_rev == CHIP_REV_YU_EX_A0) {mSoftc->msk_pflags |= MSK_FLAG_JUMBO_NOCSUM;
if (sc->msk_hw_rev == CHIP_REV_YU_EX_A0) {sc->msk_pflags |= MSK_FLAG_JUMBO_NOCSUM; } break; case CHIP_ID_YUKON_FE:
mSoftc->msk_clock = 100; /* 100 MHz */mSoftc->msk_pflags |= MSK_FLAG_FASTETHER;
sc->msk_clock = 100; /* 100 MHz */sc->msk_pflags |= MSK_FLAG_FASTETHER; break; case CHIP_ID_YUKON_FE_P:
mSoftc->msk_clock = 50; /* 50 MHz */mSoftc->msk_pflags |= MSK_FLAG_FASTETHER | MSK_FLAG_DESCV2 | MSK_FLAG_AUTOTX_CSUM;if (mSoftc->msk_hw_rev == CHIP_REV_YU_FE_P_A0) {
sc->msk_clock = 50; /* 50 MHz */sc->msk_pflags |= MSK_FLAG_FASTETHER | MSK_FLAG_DESCV2 | MSK_FLAG_AUTOTX_CSUM;if (sc->msk_hw_rev == CHIP_REV_YU_FE_P_A0) { /* * XXX * FE+ A0 has status LE writeback bug so msk (4)@@ -1275,39 +1306,39 @@ mskc_attach ( * Just pass received frames to upper stack with * minimal test and let upper stack handle them. */
mSoftc->msk_pflags |= MSK_FLAG_NOHWVLAN | MSK_FLAG_NORXCHK | MSK_FLAG_NORX_CSUM;
sc->msk_pflags |= MSK_FLAG_NOHWVLAN | MSK_FLAG_NORXCHK | MSK_FLAG_NORX_CSUM; } break; case CHIP_ID_YUKON_XL:
mSoftc->msk_clock = 156; /* 156 MHz */mSoftc->msk_pflags |= MSK_FLAG_JUMBO;
sc->msk_clock = 156; /* 156 MHz */sc->msk_pflags |= MSK_FLAG_JUMBO; break; case CHIP_ID_YUKON_UL_2:
mSoftc->msk_clock = 125; /* 125 MHz */mSoftc->msk_pflags |= MSK_FLAG_JUMBO;
sc->msk_clock = 125; /* 125 MHz */sc->msk_pflags |= MSK_FLAG_JUMBO; break; case CHIP_ID_YUKON_OPT:
mSoftc->msk_clock = 125; /* 125 MHz */mSoftc->msk_pflags |= MSK_FLAG_JUMBO | MSK_FLAG_DESCV2;
sc->msk_clock = 125; /* 125 MHz */sc->msk_pflags |= MSK_FLAG_JUMBO | MSK_FLAG_DESCV2; break; default:
mSoftc->msk_clock = 156; /* 156 MHz */
sc->msk_clock = 156; /* 156 MHz */ break;
- Status = msk_status_dma_alloc ();
- Status = msk_status_dma_alloc (sc); if (EFI_ERROR (Status)) { goto fail; }
// Set base interrupt mask
- mSoftc->msk_intrmask = Y2_IS_HW_ERR | Y2_IS_STAT_BMU;
- mSoftc->msk_intrhwemask = Y2_IS_TIST_OV | Y2_IS_MST_ERR | Y2_IS_IRQ_STAT | Y2_IS_PCI_EXP | Y2_IS_PCI_NEXP;
- sc->msk_intrmask = Y2_IS_HW_ERR | Y2_IS_STAT_BMU;
- sc->msk_intrhwemask = Y2_IS_TIST_OV | Y2_IS_MST_ERR | Y2_IS_IRQ_STAT | Y2_IS_PCI_EXP | Y2_IS_PCI_NEXP;
// Reset the adapter
- mskc_reset ();
- mskc_reset (sc);
- mskc_setup_rambuffer ();
- mskc_setup_rambuffer (sc);
Status = gBS->AllocatePool (EfiBootServicesData, sizeof (struct msk_if_softc), @@ -1316,24 +1347,21 @@ mskc_attach ( goto fail; } gBS->SetMem (ScIf, sizeof (struct msk_if_softc), 0);
- mSoftc->msk_if[MSK_PORT_A] = ScIf;
- Status = msk_attach (MSK_PORT_A);
- ScIf->msk_softc = sc;
- sc->msk_if[MSK_PORT_A] = ScIf;
- Status = mskc_attach_if (sc->msk_if[MSK_PORT_A], MSK_PORT_A); if (EFI_ERROR (Status)) { goto fail; }
- if (Mac != NULL) {
- gBS->CopyMem (Mac, &ScIf->MacAddress, sizeof (EFI_MAC_ADDRESS));
- }
- mmd = &ScIf->msk_md; mmd->port = MSK_PORT_A;
- mmd->pmd = mSoftc->msk_pmd;
- if (mSoftc->msk_pmd == 'L' || mSoftc->msk_pmd == 'S' || mSoftc->msk_pmd == 'P') {
- mmd->pmd = sc->msk_pmd;
- if (sc->msk_pmd == 'L' || sc->msk_pmd == 'S' || sc->msk_pmd == 'P') { mmd->mii_flags |= MIIF_HAVEFIBER; }
- if (mSoftc->msk_num_port > 1) {
- if (sc->msk_num_port > 1) { Status = gBS->AllocatePool (EfiBootServicesData, sizeof (struct msk_if_softc), (VOID**) &ScIf);
@@ -1341,39 +1369,44 @@ mskc_attach ( goto fail; } gBS->SetMem (ScIf, sizeof (struct msk_if_softc), 0);
- mSoftc->msk_if[MSK_PORT_B] = ScIf;
- Status = msk_attach (MSK_PORT_B);
- ScIf->msk_softc = sc;
- sc->msk_if[MSK_PORT_B] = ScIf;
- Status = mskc_attach_if (sc->msk_if[MSK_PORT_B], MSK_PORT_B); if (EFI_ERROR (Status)) { goto fail; }
mmd = &ScIf->msk_md; mmd->port = MSK_PORT_B;
- mmd->pmd = mSoftc->msk_pmd;
- if (mSoftc->msk_pmd == 'L' || mSoftc->msk_pmd == 'S' || mSoftc->msk_pmd == 'P') {
- mmd->pmd = sc->msk_pmd;
- if (sc->msk_pmd == 'L' || sc->msk_pmd == 'S' || sc->msk_pmd == 'P') { mmd->mii_flags |= MIIF_HAVEFIBER; } }
- // Return new msk_softc structure
- *ScData = sc;
- // Create timer for tick Status = gBS->CreateEvent ( EVT_NOTIFY_SIGNAL | EVT_TIMER, TPL_CALLBACK, mskc_tick,
mSoftc,&mSoftc->Timer
(VOID *)sc,&sc->Timer );
- InitializeListHead (&mSoftc->TransmitQueueHead);
- InitializeListHead (&mSoftc->TransmitFreeQueueHead);
- InitializeListHead (&mSoftc->ReceiveQueueHead);
- Status = gBS->SetTimer (sc->Timer, TimerPeriodic, TICKS_PER_SECOND);
- if (EFI_ERROR (Status)) {
- goto fail;
- }
fail: if (EFI_ERROR (Status)) {
- mskc_detach ();
- mskc_detach (sc); }
return (Status); @@ -1382,13 +1415,13 @@ RESTORE_PCI_ATTRIBS: // // Restore original PCI attributes //
- mPciIo->Attributes (
mPciIo,+PciIo->Attributes (
PciIo, EfiPciIoAttributeOperationSet,
mSoftc->OriginalPciAttributes,
sc->OriginalPciAttributes, NULL );
- gBS->FreePool (mSoftc);
- gBS->FreePool (sc); return Status; }
@@ -1399,73 +1432,69 @@ RESTORE_PCI_ATTRIBS:
- to be careful about only freeing resources that have actually been
- allocated.
*/ -static VOID -msk_detach (
- INT32 Port
+mskc_detach_if (
- struct msk_if_softc *sc_if ) {
- struct msk_if_softc *sc_if;
- sc_if = mSoftc->msk_if[Port];
- msk_stop (sc_if);
- mskc_stop_if (sc_if); msk_txrx_dma_free (sc_if);
- e1000phy_detach (sc_if->phy_softc);
- sc_if->phy_softc = NULL; }
VOID mskc_detach (
- VOID
- struct msk_softc *sc ) { EFI_TPL OldTpl;
- EFI_PCI_IO_PROTOCOL *PciIo;
OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
- if (mSoftc->msk_if[MSK_PORT_A] != NULL) {
- msk_detach (MSK_PORT_A);
- gBS->FreePool (mSoftc->msk_if[MSK_PORT_A]);
- mSoftc->msk_if[MSK_PORT_A] = NULL;
- PciIo = sc->PciIo;
- if (sc->msk_if[MSK_PORT_A] != NULL) {
- mskc_detach_if (sc->msk_if[MSK_PORT_A]);
- gBS->FreePool (sc->msk_if[MSK_PORT_A]);
- sc->msk_if[MSK_PORT_A] = NULL; }
- if (mSoftc->msk_if[MSK_PORT_B] != NULL) {
- msk_detach (MSK_PORT_B);
- gBS->FreePool (mSoftc->msk_if[MSK_PORT_B]);
- mSoftc->msk_if[MSK_PORT_B] = NULL;
- if (sc->msk_if[MSK_PORT_B] != NULL) {
- mskc_detach_if (sc->msk_if[MSK_PORT_B]);
- gBS->FreePool (sc->msk_if[MSK_PORT_B]);
- sc->msk_if[MSK_PORT_B] = NULL; }
/* Disable all interrupts. */
- CSR_WRITE_4 (mSoftc, B0_IMSK, 0);
- CSR_READ_4 (mSoftc, B0_IMSK);
- CSR_WRITE_4 (mSoftc, B0_HWE_IMSK, 0);
- CSR_READ_4 (mSoftc, B0_HWE_IMSK);
- CSR_WRITE_4 (sc, B0_IMSK, 0);
- CSR_READ_4 (sc, B0_IMSK);
- CSR_WRITE_4 (sc, B0_HWE_IMSK, 0);
- CSR_READ_4 (sc, B0_HWE_IMSK);
// LED Off.
- CSR_WRITE_2 (mSoftc, B0_CTST, Y2_LED_STAT_OFF);
- CSR_WRITE_2 (sc, B0_CTST, Y2_LED_STAT_OFF);
// Put hardware reset.
- CSR_WRITE_2 (mSoftc, B0_CTST, CS_RST_SET);
- CSR_WRITE_2 (sc, B0_CTST, CS_RST_SET);
- msk_status_dma_free ();
- msk_status_dma_free (sc);
- if (mSoftc->Timer != NULL) {
- gBS->SetTimer (mSoftc->Timer, TimerCancel, 0);
- gBS->CloseEvent (mSoftc->Timer);
- if (sc->Timer != NULL) {
- gBS->SetTimer (sc->Timer, TimerCancel, 0);
- gBS->CloseEvent (sc->Timer);
- mSoftc->Timer = NULL;
- sc->Timer = NULL; } // // Restore original PCI attributes //
- mPciIo->Attributes (
mPciIo,
- PciIo->Attributes (
PciIo, EfiPciIoAttributeOperationSet,
mSoftc->OriginalPciAttributes,
sc->OriginalPciAttributes, NULL );
- gBS->FreePool (mSoftc);
- mSoftc = NULL;
- mPciIo = NULL;
gBS->RestoreTPL (OldTpl); } @@ -1474,24 +1503,27 @@ mskc_detach ( static EFI_STATUS msk_status_dma_alloc (
- VOID
- struct msk_softc *sc ) { EFI_STATUS Status; UINTN Length;
- EFI_PCI_IO_PROTOCOL *PciIo;
- Status = mPciIo->AllocateBuffer (mPciIo, AllocateAnyPages, EfiBootServicesData,
EFI_SIZE_TO_PAGES (MSK_STAT_RING_SZ), (VOID**)&mSoftc->msk_stat_ring, 0);
- PciIo = sc->PciIo;
- Status = PciIo->AllocateBuffer (PciIo, AllocateAnyPages, EfiBootServicesData,
EFI_SIZE_TO_PAGES (MSK_STAT_RING_SZ), (VOID**)&sc->msk_stat_ring, 0);if (EFI_ERROR (Status)) { DEBUG ((EFI_D_ERROR, "Marvell Yukon: failed to allocate DMA'able memory for status ring\n")); return Status; }
- ASSERT (mSoftc->msk_stat_ring != NULL);
- ASSERT (sc->msk_stat_ring != NULL);
Length = MSK_STAT_RING_SZ;
- Status = mPciIo->Map (mPciIo, EfiPciIoOperationBusMasterCommonBuffer, mSoftc->msk_stat_ring,
&Length, &mSoftc->msk_stat_ring_paddr, &mSoftc->msk_stat_map);
- Status = PciIo->Map (PciIo, EfiPciIoOperationBusMasterCommonBuffer, sc->msk_stat_ring,
&Length, &sc->msk_stat_ring_paddr, &sc->msk_stat_map);if (EFI_ERROR (Status)) { @@ -1504,16 +1536,20 @@ msk_status_dma_alloc ( static VOID msk_status_dma_free (
- VOID
- struct msk_softc *sc ) {
- if (mSoftc->msk_stat_map) {
- mPciIo->Unmap (mPciIo, mSoftc->msk_stat_map);
- if (mSoftc->msk_stat_ring) {
mPciIo->FreeBuffer (mPciIo, EFI_SIZE_TO_PAGES (MSK_STAT_RING_SZ), mSoftc->msk_stat_ring);mSoftc->msk_stat_ring = NULL;
- EFI_PCI_IO_PROTOCOL *PciIo;
- PciIo = sc->PciIo;
- if (sc->msk_stat_map) {
- PciIo->Unmap (PciIo, sc->msk_stat_map);
- if (sc->msk_stat_ring) {
PciIo->FreeBuffer (PciIo, EFI_SIZE_TO_PAGES (MSK_STAT_RING_SZ), sc->msk_stat_ring);sc->msk_stat_ring = NULL; }
- mSoftc->msk_stat_map = NULL;
- sc->msk_stat_map = NULL; } }
@@ -1528,8 +1564,11 @@ msk_txrx_dma_alloc ( INTN i; UINTN Length; EFI_STATUS Status;
- EFI_PCI_IO_PROTOCOL *PciIo;
- PciIo = sc_if->msk_softc->PciIo;
- Status = mPciIo->AllocateBuffer (mPciIo, AllocateAnyPages, EfiBootServicesData,
- Status = PciIo->AllocateBuffer (PciIo, AllocateAnyPages, EfiBootServicesData, EFI_SIZE_TO_PAGES (MSK_TX_RING_SZ), (VOID**)&sc_if->msk_rdata.msk_tx_ring, 0);
if (EFI_ERROR (Status)) { @@ -1539,7 +1578,7 @@ msk_txrx_dma_alloc ( ASSERT (sc_if->msk_rdata.msk_tx_ring != NULL); Length = MSK_TX_RING_SZ;
- Status = mPciIo->Map (mPciIo, EfiPciIoOperationBusMasterCommonBuffer, sc_if->msk_rdata.msk_tx_ring,
- Status = PciIo->Map (PciIo, EfiPciIoOperationBusMasterCommonBuffer, sc_if->msk_rdata.msk_tx_ring, &Length, &sc_if->msk_rdata.msk_tx_ring_paddr, &sc_if->msk_cdata.msk_tx_ring_map);
if (EFI_ERROR (Status)) { @@ -1548,7 +1587,7 @@ msk_txrx_dma_alloc ( } ASSERT (Length == MSK_TX_RING_SZ);
- Status = mPciIo->AllocateBuffer (mPciIo, AllocateAnyPages, EfiBootServicesData,
- Status = PciIo->AllocateBuffer (PciIo, AllocateAnyPages, EfiBootServicesData, EFI_SIZE_TO_PAGES (MSK_RX_RING_SZ), (VOID**)&sc_if->msk_rdata.msk_rx_ring, 0);
if (EFI_ERROR (Status)) { @@ -1558,7 +1597,7 @@ msk_txrx_dma_alloc ( ASSERT (sc_if->msk_rdata.msk_rx_ring != NULL); Length = MSK_RX_RING_SZ;
- Status = mPciIo->Map (mPciIo, EfiPciIoOperationBusMasterCommonBuffer, sc_if->msk_rdata.msk_rx_ring,
- Status = PciIo->Map (PciIo, EfiPciIoOperationBusMasterCommonBuffer, sc_if->msk_rdata.msk_rx_ring, &Length, &sc_if->msk_rdata.msk_rx_ring_paddr, &sc_if->msk_cdata.msk_rx_ring_map);
if (EFI_ERROR (Status)) { @@ -1591,12 +1630,15 @@ msk_txrx_dma_free ( struct msk_txdesc *txd; struct msk_rxdesc *rxd; INTN i;
- EFI_PCI_IO_PROTOCOL *PciIo;
- PciIo = sc_if->msk_softc->PciIo;
// Tx ring if (sc_if->msk_cdata.msk_tx_ring_map) {
- mPciIo->Unmap (mPciIo, sc_if->msk_cdata.msk_tx_ring_map);
- PciIo->Unmap (PciIo, sc_if->msk_cdata.msk_tx_ring_map); if (sc_if->msk_rdata.msk_tx_ring) {
mPciIo->FreeBuffer (mPciIo, EFI_SIZE_TO_PAGES (MSK_TX_RING_SZ), sc_if->msk_rdata.msk_tx_ring);
PciIo->FreeBuffer (PciIo, EFI_SIZE_TO_PAGES (MSK_TX_RING_SZ), sc_if->msk_rdata.msk_tx_ring); sc_if->msk_rdata.msk_tx_ring = NULL; } sc_if->msk_cdata.msk_tx_ring_map = NULL;@@ -1604,9 +1646,9 @@ msk_txrx_dma_free ( // Rx ring if (sc_if->msk_cdata.msk_rx_ring_map) {
- mPciIo->Unmap (mPciIo, sc_if->msk_cdata.msk_rx_ring_map);
- PciIo->Unmap (PciIo, sc_if->msk_cdata.msk_rx_ring_map); if (sc_if->msk_rdata.msk_rx_ring) {
mPciIo->FreeBuffer (mPciIo, EFI_SIZE_TO_PAGES (MSK_RX_RING_SZ), sc_if->msk_rdata.msk_rx_ring);
PciIo->FreeBuffer (PciIo, EFI_SIZE_TO_PAGES (MSK_RX_RING_SZ), sc_if->msk_rdata.msk_rx_ring); sc_if->msk_rdata.msk_rx_ring = NULL; } sc_if->msk_cdata.msk_rx_ring_map = NULL;@@ -1616,7 +1658,7 @@ msk_txrx_dma_free ( for (i = 0; i < MSK_TX_RING_CNT; i++) { txd = &sc_if->msk_cdata.msk_txdesc[i]; if (txd->tx_m.DmaMapping) {
mPciIo->Unmap (mPciIo, txd->tx_m.DmaMapping);
PciIo->Unmap (PciIo, txd->tx_m.DmaMapping); gBS->SetMem (&(txd->tx_m), sizeof (MSK_DMA_BUF), 0); // We don't own the transmit buffers so don't free them }@@ -1625,7 +1667,7 @@ msk_txrx_dma_free ( for (i = 0; i < MSK_RX_RING_CNT; i++) { rxd = &sc_if->msk_cdata.msk_rxdesc[i]; if (rxd->rx_m.DmaMapping) {
mPciIo->Unmap (mPciIo, rxd->rx_m.DmaMapping);
PciIo->Unmap (PciIo, rxd->rx_m.DmaMapping); // Free Rx buffers as we own these if(rxd->rx_m.Buf != NULL) { gBS->FreePool (rxd->rx_m.Buf);@@ -1653,12 +1695,14 @@ msk_encap ( UINT32 prod; UINT32 si; EFI_STATUS Status;
- EFI_PCI_IO_PROTOCOL *PciIo;
- PciIo = sc_if->msk_softc->PciIo; prod = sc_if->msk_cdata.msk_tx_prod; txd = &sc_if->msk_cdata.msk_txdesc[prod]; txd_last = txd; BusLength = m_head->Length;
- Status = mPciIo->Map (mPciIo, EfiPciIoOperationBusMasterRead, m_head->Buf,
- Status = PciIo->Map (PciIo, EfiPciIoOperationBusMasterRead, m_head->Buf, &BusLength, &BusPhysAddr, &txd->tx_m.DmaMapping);
if (EFI_ERROR (Status)) { @@ -1713,6 +1757,7 @@ msk_encap ( EFI_STATUS mskc_transmit (
- struct msk_if_softc *sc_if, UINTN BufferSize, VOID *Buffer )
@@ -1733,32 +1778,32 @@ mskc_transmit ( // LinkedSystemBuf->SystemBuf.Buf = Buffer; LinkedSystemBuf->SystemBuf.Length = BufferSize;
- InsertTailList (&mSoftc->TransmitQueueHead, &LinkedSystemBuf->Link);
- msk_start (MSK_PORT_A);
- InsertTailList (&sc_if->TransmitQueueHead, &LinkedSystemBuf->Link);
- msk_start (sc_if); return EFI_SUCCESS; }
void mskc_getstatus (
- struct msk_if_softc *sc_if, OUT UINT32 *InterruptStatus, OPTIONAL OUT VOID **TxBuf OPTIONAL ) {
- //struct msk_chain_data* cdata; MSK_LINKED_SYSTEM_BUF *m_head;
// Interrupt status is not read from the device when InterruptStatus is NULL if (InterruptStatus != NULL) { // Check the interrupt lines
- msk_intr ();
- msk_intr (sc_if->msk_softc); }
// The transmit buffer status is not read when TxBuf is NULL if (TxBuf != NULL) { *((UINT8 **) TxBuf) = (UINT8 *) 0;
- if( !IsListEmpty (&mSoftc->TransmitFreeQueueHead))
- if( !IsListEmpty (&sc_if->TransmitFreeQueueHead)) {
m_head = CR (GetFirstNode (&mSoftc->TransmitFreeQueueHead), MSK_LINKED_SYSTEM_BUF, Link, TX_MBUF_SIGNATURE);
m_head = CR (GetFirstNode (&sc_if->TransmitFreeQueueHead), MSK_LINKED_SYSTEM_BUF, Link, TX_MBUF_SIGNATURE); if(m_head != NULL) { *TxBuf = m_head->SystemBuf.Buf; RemoveEntryList (&m_head->Link);@@ -1771,20 +1816,18 @@ mskc_getstatus ( static VOID msk_start (
- INT32 Port
- struct msk_if_softc *sc_if ) { EFI_STATUS Status;
- struct msk_if_softc *sc_if; MSK_LINKED_SYSTEM_BUF *m_head; INTN enq;
- sc_if = mSoftc->msk_if[Port];
- for (enq = 0; !IsListEmpty (&mSoftc->TransmitQueueHead) &&
- for (enq = 0; !IsListEmpty (&sc_if->TransmitQueueHead) && sc_if->msk_cdata.msk_tx_cnt < (MSK_TX_RING_CNT - MSK_RESERVED_TX_DESC_CNT); ) {
- m_head = CR (GetFirstNode (&mSoftc->TransmitQueueHead), MSK_LINKED_SYSTEM_BUF, Link, TX_MBUF_SIGNATURE);
- m_head = CR (GetFirstNode (&sc_if->TransmitQueueHead), MSK_LINKED_SYSTEM_BUF, Link, TX_MBUF_SIGNATURE); if (m_head == NULL) { break; }
@@ -1799,19 +1842,19 @@ msk_start ( } RemoveEntryList (&m_head->Link);
- InsertTailList (&mSoftc->TransmitFreeQueueHead, &m_head->Link);
- InsertTailList (&sc_if->TransmitFreeQueueHead, &m_head->Link); enq++; }
if (enq > 0) { // Transmit
- CSR_WRITE_2 (mSoftc, Y2_PREF_Q_ADDR (sc_if->msk_txq, PREF_UNIT_PUT_IDX_REG), sc_if->msk_cdata.msk_tx_prod);
- CSR_WRITE_2 (sc_if->msk_softc, Y2_PREF_Q_ADDR (sc_if->msk_txq, PREF_UNIT_PUT_IDX_REG), sc_if->msk_cdata.msk_tx_prod); } }
VOID mskc_shutdown (
- VOID
- struct msk_softc *sc ) { INTN i;
@@ -1819,35 +1862,36 @@ mskc_shutdown ( OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
- for (i = 0; i < mSoftc->msk_num_port; i++) {
- if (mSoftc->msk_if[i] != NULL) {
msk_stop (mSoftc->msk_if[i]);
- for (i = 0; i < sc->msk_num_port; i++) {
- if (sc->msk_if[i] != NULL) {
mskc_stop_if (sc->msk_if[i]); }
- gBS->SetTimer (mSoftc->Timer, TimerCancel, 0);
- gBS->SetTimer (sc->Timer, TimerCancel, 0);
/* Put hardware reset. */
- CSR_WRITE_2 (mSoftc, B0_CTST, CS_RST_SET);
- CSR_WRITE_2 (sc, B0_CTST, CS_RST_SET);
gBS->RestoreTPL (OldTpl); } EFI_STATUS mskc_receive (
- struct msk_if_softc *sc_if, IN OUT UINTN *BufferSize, OUT VOID *Buffer ) { MSK_LINKED_SYSTEM_BUF *mBuf;
- msk_intr (); // check the interrupt lines
- msk_intr (sc_if->msk_softc); // check the interrupt lines
- if (IsListEmpty (&mSoftc->ReceiveQueueHead)) {
- if (IsListEmpty (&sc_if->ReceiveQueueHead)) { *BufferSize = 0; return EFI_NOT_READY; }
- mBuf = CR (GetFirstNode (&mSoftc->ReceiveQueueHead), MSK_LINKED_SYSTEM_BUF, Link, RX_MBUF_SIGNATURE);
- mBuf = CR (GetFirstNode (&sc_if->ReceiveQueueHead), MSK_LINKED_SYSTEM_BUF, Link, RX_MBUF_SIGNATURE); if (mBuf->SystemBuf.Length > *BufferSize) { *BufferSize = mBuf->SystemBuf.Length; DEBUG ((EFI_D_NET, "Marvell Yukon: Receive buffer is too small: Provided = %d, Received = %d\n",
@@ -1876,9 +1920,11 @@ msk_rxeof ( INTN cons; INTN rxlen; MSK_DMA_BUF m;
- EFI_PCI_IO_PROTOCOL *PciIo;
DEBUG ((EFI_D_NET, "Marvell Yukon: rxeof\n"));
- PciIo = sc_if->msk_softc->PciIo; cons = sc_if->msk_cdata.msk_rx_cons; do { rxlen = status >> 16;
@@ -1917,12 +1963,12 @@ msk_rxeof ( break; }
- Status = mPciIo->Flush (mPciIo);
- Status = PciIo->Flush (PciIo); if (EFI_ERROR (Status)) { DEBUG ((EFI_D_NET, "Marvell Yukon: failed to Flush DMA\n")); }
- Status = mPciIo->Unmap (mPciIo, rxd->rx_m.DmaMapping);
- Status = PciIo->Unmap (PciIo, rxd->rx_m.DmaMapping); if (EFI_ERROR (Status)) { DEBUG ((EFI_D_NET, "Marvell Yukon: failed to Unmap DMA\n")); }
@@ -1936,7 +1982,7 @@ msk_rxeof ( m_link->SystemBuf.Buf = m.Buf; m_link->SystemBuf.Length = len;
InsertTailList (&mSoftc->ReceiveQueueHead, &m_link->Link);
InsertTailList (&sc_if->ReceiveQueueHead, &m_link->Link); } else { DEBUG ((EFI_D_NET, "Marvell Yukon: failed to allocate receive buffer link. Dropping Frame\n")); gBS->FreePool (m.Buf);@@ -1959,8 +2005,12 @@ msk_txeof ( UINT32 control; INTN cons; INTN prog;
- EFI_PCI_IO_PROTOCOL *PciIo;
DEBUG ((EFI_D_NET, "Marvell Yukon: txeof\n"));
- PciIo = sc_if->msk_softc->PciIo;
- // // Go through our tx ring and free mbufs for those // frames that have been sent.
@@ -1979,7 +2029,7 @@ msk_txeof ( continue; } txd = &sc_if->msk_cdata.msk_txdesc[cons];
- mPciIo->Unmap (mPciIo, txd->tx_m.DmaMapping);
- PciIo->Unmap (PciIo, txd->tx_m.DmaMapping); gBS->SetMem (&(txd->tx_m), sizeof (MSK_DMA_BUF), 0); // We don't own the transmit buffers so don't free them }
@@ -1997,11 +2047,20 @@ mskc_tick ( ) { EFI_TPL OldTpl;
- struct msk_softc *sc;
OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
- e1000phy_tick ();
- msk_handle_events ();
- sc = (struct msk_softc *)Context;
- if (sc->msk_if[MSK_PORT_A] != NULL) {
- e1000phy_tick (sc->msk_if[MSK_PORT_A]->phy_softc);
- }
- if (sc->msk_if[MSK_PORT_B] != NULL) {
- e1000phy_tick (sc->msk_if[MSK_PORT_B]->phy_softc);
- }
- msk_handle_events (sc);
gBS->RestoreTPL (OldTpl); } @@ -2014,8 +2073,8 @@ msk_intr_phy ( { UINT16 status;
- msk_phy_readreg (sc_if->msk_md.port, PHY_MARV_INT_STAT);
- status = msk_phy_readreg (sc_if->msk_md.port, PHY_MARV_INT_STAT);
- msk_phy_readreg (sc_if, PHY_MARV_INT_STAT);
- status = msk_phy_readreg (sc_if, PHY_MARV_INT_STAT);
// Handle FIFO Underrun/Overflow ? if ((status & PHY_M_IS_FIFO_ERROR)) { @@ -2030,16 +2089,19 @@ msk_intr_gmac ( ) { UINT8 status;
- struct msk_softc *sc;
- status = CSR_READ_1 (mSoftc, MR_ADDR (sc_if->msk_md.port, GMAC_IRQ_SRC));
- sc = sc_if->msk_softc;
- status = CSR_READ_1 (sc, MR_ADDR (sc_if->msk_md.port, GMAC_IRQ_SRC));
// GMAC Rx FIFO overrun. if ((status & GM_IS_RX_FF_OR) != 0) {
- CSR_WRITE_4 (mSoftc, MR_ADDR (sc_if->msk_md.port, RX_GMF_CTRL_T), GMF_CLI_RX_FO);
- CSR_WRITE_4 (sc, MR_ADDR (sc_if->msk_md.port, RX_GMF_CTRL_T), GMF_CLI_RX_FO); } // GMAC Tx FIFO underrun. if ((status & GM_IS_TX_FF_UR) != 0) {
- CSR_WRITE_4 (mSoftc, MR_ADDR (sc_if->msk_md.port, TX_GMF_CTRL_T), GMF_CLI_TX_FU);
- CSR_WRITE_4 (sc, MR_ADDR (sc_if->msk_md.port, TX_GMF_CTRL_T), GMF_CLI_TX_FU); //device_printf (sc_if->msk_if_dev, "Tx FIFO underrun!\n");*/ DEBUG ((EFI_D_NET, "Marvell Yukon: Tx FIFO underrun!\n")); /*
@@ -2062,47 +2124,51 @@ msk_handle_hwerr ( UINT32 status ) {
- struct msk_softc *sc;
- sc = sc_if->msk_softc;
- if ((status & Y2_IS_PAR_RD1) != 0) { DEBUG ((EFI_D_NET, "Marvell Yukon: RAM buffer read parity error\n")); // Clear IRQ.
- CSR_WRITE_2 (mSoftc, SELECT_RAM_BUFFER (sc_if->msk_md.port, B3_RI_CTRL), RI_CLR_RD_PERR);
- CSR_WRITE_2 (sc, SELECT_RAM_BUFFER (sc_if->msk_md.port, B3_RI_CTRL), RI_CLR_RD_PERR); } if ((status & Y2_IS_PAR_WR1) != 0) { DEBUG ((EFI_D_NET, "Marvell Yukon: RAM buffer write parity error\n")); // Clear IRQ
- CSR_WRITE_2 (mSoftc, SELECT_RAM_BUFFER (sc_if->msk_md.port, B3_RI_CTRL), RI_CLR_WR_PERR);
- CSR_WRITE_2 (sc, SELECT_RAM_BUFFER (sc_if->msk_md.port, B3_RI_CTRL), RI_CLR_WR_PERR); } if ((status & Y2_IS_PAR_MAC1) != 0) { DEBUG ((EFI_D_NET, "Marvell Yukon: Tx MAC parity error\n")); // Clear IRQ
- CSR_WRITE_4 (mSoftc, MR_ADDR (sc_if->msk_md.port, TX_GMF_CTRL_T), GMF_CLI_TX_PE);
- CSR_WRITE_4 (sc, MR_ADDR (sc_if->msk_md.port, TX_GMF_CTRL_T), GMF_CLI_TX_PE); } if ((status & Y2_IS_PAR_RX1) != 0) { DEBUG ((EFI_D_NET, "Marvell Yukon: Rx parity error\n")); // Clear IRQ
- CSR_WRITE_4 (mSoftc, Q_ADDR (sc_if->msk_rxq, Q_CSR), BMU_CLR_IRQ_PAR);
- CSR_WRITE_4 (sc, Q_ADDR (sc_if->msk_rxq, Q_CSR), BMU_CLR_IRQ_PAR); } if ((status & (Y2_IS_TCP_TXS1 | Y2_IS_TCP_TXA1)) != 0) { DEBUG ((EFI_D_NET, "Marvell Yukon: TCP segmentation error\n")); // Clear IRQ
- CSR_WRITE_4 (mSoftc, Q_ADDR (sc_if->msk_txq, Q_CSR), BMU_CLR_IRQ_TCP);
- CSR_WRITE_4 (sc, Q_ADDR (sc_if->msk_txq, Q_CSR), BMU_CLR_IRQ_TCP); } }
static VOID msk_intr_hwerr (
- VOID
- struct msk_softc *sc ) { UINT32 status; UINT32 tlphead[4];
- status = CSR_READ_4 (mSoftc, B0_HWE_ISRC);
- status = CSR_READ_4 (sc, B0_HWE_ISRC);
// Time Stamp timer overflow. if ((status & Y2_IS_TIST_OV) != 0) {
- CSR_WRITE_1 (mSoftc, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ);
- CSR_WRITE_1 (sc, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ); } if ((status & Y2_IS_PCI_NEXP) != 0) { /*
@@ -2123,7 +2189,7 @@ msk_intr_hwerr ( DEBUG ((EFI_D_NET, "Marvell Yukon: unexpected IRQ Master error\n")); } // Reset all bits in the PCI status register
- clear_pci_errors ();
- clear_pci_errors (sc); }
// Check for PCI Express Uncorrectable Error. @@ -2138,7 +2204,7 @@ msk_intr_hwerr ( * may be performed any longer. */
- v32 = CSR_PCI_READ_4 (mSoftc, PEX_UNC_ERR_STAT);
- v32 = CSR_PCI_READ_4 (sc, PEX_UNC_ERR_STAT); if ((v32 & PEX_UNSUP_REQ) != 0) { // Ignore unsupported request error. DEBUG ((EFI_D_NET, "Marvell Yukon: Uncorrectable PCI Express error\n"));
@@ -2148,26 +2214,26 @@ msk_intr_hwerr ( // Get TLP header form Log Registers. for (i = 0; i < 4; i++) {
tlphead[i] = CSR_PCI_READ_4 (mSoftc, PEX_HEADER_LOG + i * 4);
tlphead[i] = CSR_PCI_READ_4 (sc, PEX_HEADER_LOG + i * 4); } // Check for vendor defined broadcast message. if (!(tlphead[0] == 0x73004001 && tlphead[1] == 0x7f)) {
mSoftc->msk_intrhwemask &= ~Y2_IS_PCI_EXP;CSR_WRITE_4 (mSoftc, B0_HWE_IMSK, mSoftc->msk_intrhwemask);CSR_READ_4 (mSoftc, B0_HWE_IMSK);
sc->msk_intrhwemask &= ~Y2_IS_PCI_EXP;CSR_WRITE_4 (sc, B0_HWE_IMSK, sc->msk_intrhwemask);CSR_READ_4 (sc, B0_HWE_IMSK); } } // Clear the interrupt
- CSR_WRITE_1 (mSoftc, B2_TST_CTRL1, TST_CFG_WRITE_ON);
- CSR_PCI_WRITE_4 (mSoftc, PEX_UNC_ERR_STAT, 0xffffffff);
- CSR_WRITE_1 (mSoftc, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
- CSR_WRITE_1 (sc, B2_TST_CTRL1, TST_CFG_WRITE_ON);
- CSR_PCI_WRITE_4 (sc, PEX_UNC_ERR_STAT, 0xffffffff);
- CSR_WRITE_1 (sc, B2_TST_CTRL1, TST_CFG_WRITE_OFF); }
- if ((status & Y2_HWE_L1_MASK) != 0 && mSoftc->msk_if[MSK_PORT_A] != NULL) {
- msk_handle_hwerr (mSoftc->msk_if[MSK_PORT_A], status);
- if ((status & Y2_HWE_L1_MASK) != 0 && sc->msk_if[MSK_PORT_A] != NULL) {
- msk_handle_hwerr (sc->msk_if[MSK_PORT_A], status); }
- if ((status & Y2_HWE_L2_MASK) != 0 && mSoftc->msk_if[MSK_PORT_B] != NULL) {
- msk_handle_hwerr (mSoftc->msk_if[MSK_PORT_B], status >> 8);
- if ((status & Y2_HWE_L2_MASK) != 0 && sc->msk_if[MSK_PORT_B] != NULL) {
- msk_handle_hwerr (sc->msk_if[MSK_PORT_B], status >> 8); } }
@@ -2178,16 +2244,15 @@ msk_rxput ( struct msk_if_softc *sc_if ) {
- CSR_WRITE_2 (mSoftc, Y2_PREF_Q_ADDR (sc_if->msk_rxq, PREF_UNIT_PUT_IDX_REG), sc_if->msk_cdata.msk_rx_prod);
- CSR_WRITE_2 (sc_if->msk_softc, Y2_PREF_Q_ADDR (sc_if->msk_rxq, PREF_UNIT_PUT_IDX_REG), sc_if->msk_cdata.msk_rx_prod); }
static INTN msk_handle_events (
- VOID
- struct msk_softc *sc ) {
- struct msk_if_softc *sc_if; INTN rxput[2]; struct msk_stat_desc *sd; UINT32 control;
@@ -2196,16 +2261,17 @@ msk_handle_events ( INTN len; INTN port; INTN rxprog;
- struct msk_if_softc *sc_if;
- if (mSoftc->msk_stat_cons == CSR_READ_2 (mSoftc, STAT_PUT_IDX)) {
- if (sc->msk_stat_cons == CSR_READ_2 (sc, STAT_PUT_IDX)) { return (0); }
rxput[MSK_PORT_A] = rxput[MSK_PORT_B] = 0; rxprog = 0;
- cons = mSoftc->msk_stat_cons;
- cons = sc->msk_stat_cons; for (;;) {
- sd = &mSoftc->msk_stat_ring[cons];
- sd = &sc->msk_stat_ring[cons]; control = le32toh (sd->msk_control); if ((control & HW_OWNER) == 0) { break;
@@ -2215,7 +2281,7 @@ msk_handle_events ( status = le32toh (sd->msk_status); len = control & STLE_LEN_MASK; port = (control >> 16) & 0x01;
- sc_if = mSoftc->msk_if[port];
- sc_if = sc->msk_if[port]; if (sc_if == NULL) { DEBUG ((EFI_D_NET, "Marvell Yukon: invalid port opcode 0x%08x\n", control & STLE_OP_MASK)); continue;
@@ -2238,11 +2304,11 @@ msk_handle_events ( } break; case OP_TXINDEXLE:
if (mSoftc->msk_if[MSK_PORT_A] != NULL) {msk_txeof (mSoftc->msk_if[MSK_PORT_A], status & STLE_TXA1_MSKL);
if (sc->msk_if[MSK_PORT_A] != NULL) {msk_txeof (sc->msk_if[MSK_PORT_A], status & STLE_TXA1_MSKL); }
if (mSoftc->msk_if[MSK_PORT_B] != NULL) {msk_txeof (mSoftc->msk_if[MSK_PORT_B],
if (sc->msk_if[MSK_PORT_B] != NULL) {msk_txeof (sc->msk_if[MSK_PORT_B], ((status & STLE_TXA2_MSKL) >> STLE_TXA2_SHIFTL) | ((len & STLE_TXA2_MSKH) <<@@ -2254,27 +2320,27 @@ msk_handle_events ( break; } MSK_INC (cons, MSK_STAT_RING_CNT);
- if (rxprog > mSoftc->msk_process_limit) {
- if (rxprog > sc->msk_process_limit) { break; } }
- mSoftc->msk_stat_cons = cons;
- sc->msk_stat_cons = cons;
if (rxput[MSK_PORT_A] > 0) {
- msk_rxput (mSoftc->msk_if[MSK_PORT_A]);
- msk_rxput (sc->msk_if[MSK_PORT_A]); } if (rxput[MSK_PORT_B] > 0) {
- msk_rxput (mSoftc->msk_if[MSK_PORT_B]);
- msk_rxput (sc->msk_if[MSK_PORT_B]); }
- return (mSoftc->msk_stat_cons != CSR_READ_2 (mSoftc, STAT_PUT_IDX));
- return (sc->msk_stat_cons != CSR_READ_2 (sc, STAT_PUT_IDX)); }
STATIC VOID msk_intr (
- VOID
- struct msk_softc *sc ) { struct msk_if_softc *sc_if0;
@@ -2283,18 +2349,18 @@ msk_intr ( INTN domore; // Reading B0_Y2_SP_ISRC2 masks further interrupts
- Status = CSR_READ_4 (mSoftc, B0_Y2_SP_ISRC2);
- Status = CSR_READ_4 (sc, B0_Y2_SP_ISRC2); if (Status == 0 || Status == 0xffffffff ||
(mSoftc->msk_pflags & MSK_FLAG_SUSPEND) != 0 ||(Status & mSoftc->msk_intrmask) == 0)
(sc->msk_pflags & MSK_FLAG_SUSPEND) != 0 ||(Status & sc->msk_intrmask) == 0)
- CSR_WRITE_4 (mSoftc, B0_Y2_SP_ICR, 2);
- CSR_WRITE_4 (sc, B0_Y2_SP_ICR, 2); return; }
- sc_if0 = mSoftc->msk_if[MSK_PORT_A];
- sc_if1 = mSoftc->msk_if[MSK_PORT_B];
- sc_if0 = sc->msk_if[MSK_PORT_A];
- sc_if1 = sc->msk_if[MSK_PORT_B];
if ((Status & Y2_IS_IRQ_PHY1) != 0 && sc_if0 != NULL) { msk_intr_phy (sc_if0); @@ -2310,27 +2376,27 @@ msk_intr ( } if ((Status & (Y2_IS_CHK_RX1 | Y2_IS_CHK_RX2)) != 0) { DEBUG ((EFI_D_NET, "Marvell Yukon: Rx descriptor error\n"));
- mSoftc->msk_intrmask &= ~(Y2_IS_CHK_RX1 | Y2_IS_CHK_RX2);
- CSR_WRITE_4 (mSoftc, B0_IMSK, mSoftc->msk_intrmask);
- CSR_READ_4 (mSoftc, B0_IMSK);
- sc->msk_intrmask &= ~(Y2_IS_CHK_RX1 | Y2_IS_CHK_RX2);
- CSR_WRITE_4 (sc, B0_IMSK, sc->msk_intrmask);
- CSR_READ_4 (sc, B0_IMSK); } if ((Status & (Y2_IS_CHK_TXA1 | Y2_IS_CHK_TXA2)) != 0) { DEBUG ((EFI_D_NET, "Marvell Yukon: Tx descriptor error\n"));
- mSoftc->msk_intrmask &= ~(Y2_IS_CHK_TXA1 | Y2_IS_CHK_TXA2);
- CSR_WRITE_4 (mSoftc, B0_IMSK, mSoftc->msk_intrmask);
- CSR_READ_4 (mSoftc, B0_IMSK);
- sc->msk_intrmask &= ~(Y2_IS_CHK_TXA1 | Y2_IS_CHK_TXA2);
- CSR_WRITE_4 (sc, B0_IMSK, sc->msk_intrmask);
- CSR_READ_4 (sc, B0_IMSK); } if ((Status & Y2_IS_HW_ERR) != 0) {
- msk_intr_hwerr ();
- msk_intr_hwerr (sc); }
- domore = msk_handle_events ();
- domore = msk_handle_events (sc); if ((Status & Y2_IS_STAT_BMU) != 0 && domore == 0) {
- CSR_WRITE_4 (mSoftc, STAT_CTRL, SC_STAT_CLR_IRQ);
- CSR_WRITE_4 (sc, STAT_CTRL, SC_STAT_CLR_IRQ); }
// Leave ISR - Reenable interrupts
- CSR_WRITE_4 (mSoftc, B0_Y2_SP_ICR, 2);
- CSR_WRITE_4 (sc, B0_Y2_SP_ICR, 2); }
static @@ -2340,25 +2406,21 @@ msk_set_tx_stfwd ( ) { // Disable jumbo frames for Tx
- CSR_WRITE_4 (mSoftc, MR_ADDR (sc_if->msk_md.port, TX_GMF_CTRL_T), TX_JUMBO_DIS | TX_STFW_ENA);
- CSR_WRITE_4 (sc_if->msk_softc, MR_ADDR (sc_if->msk_md.port, TX_GMF_CTRL_T), TX_JUMBO_DIS | TX_STFW_ENA); }
EFI_STATUS mskc_init (
- VOID
- struct msk_if_softc *sc_if ) { EFI_STATUS Status;
- // Just init port A
- Status = msk_init (mSoftc->msk_if[MSK_PORT_A]);
- Status = msk_init (sc_if); if (EFI_ERROR (Status)) { return Status; }
- Status = gBS->SetTimer (mSoftc->Timer, TimerPeriodic, TICKS_PER_SECOND);
- if (EFI_ERROR (Status)) {
- mskc_shutdown ();
- }
- return Status; }
@@ -2372,80 +2434,84 @@ msk_init ( UINT16 gmac; UINT32 reg; EFI_STATUS Status;
- INTN port = sc_if->msk_md.port;
- INTN port;
- IN struct msk_softc *sc;
- sc = sc_if->msk_softc;
- port = sc_if->msk_md.port;
// Cancel pending I/O and free all Rx/Tx buffers.
- msk_stop (sc_if);
- mskc_stop_if (sc_if);
sc_if->msk_framesize = MAX_SUPPORTED_PACKET_SIZE; // GMAC Control reset.
- CSR_WRITE_4 (mSoftc, MR_ADDR (port, GMAC_CTRL), GMC_RST_SET);
- CSR_WRITE_4 (mSoftc, MR_ADDR (port, GMAC_CTRL), GMC_RST_CLR);
- CSR_WRITE_4 (mSoftc, MR_ADDR (port, GMAC_CTRL), GMC_F_LOOPB_OFF);
- if (mSoftc->msk_hw_id == CHIP_ID_YUKON_EX) {
- CSR_WRITE_4 (mSoftc, MR_ADDR (port, GMAC_CTRL), GMC_BYP_MACSECRX_ON | GMC_BYP_MACSECTX_ON | GMC_BYP_RETR_ON);
- CSR_WRITE_4 (sc, MR_ADDR (port, GMAC_CTRL), GMC_RST_SET);
- CSR_WRITE_4 (sc, MR_ADDR (port, GMAC_CTRL), GMC_RST_CLR);
- CSR_WRITE_4 (sc, MR_ADDR (port, GMAC_CTRL), GMC_F_LOOPB_OFF);
- if (sc->msk_hw_id == CHIP_ID_YUKON_EX) {
- CSR_WRITE_4 (sc, MR_ADDR (port, GMAC_CTRL), GMC_BYP_MACSECRX_ON | GMC_BYP_MACSECTX_ON | GMC_BYP_RETR_ON); }
// // Initialize GMAC first such that speed/duplex/flow-control // parameters are renegotiated when interface is brought up. //
- GMAC_WRITE_2 (mSoftc, port, GM_GP_CTRL, 0);
- GMAC_WRITE_2 (sc, port, GM_GP_CTRL, 0);
// Dummy read the Interrupt Source Register
- CSR_READ_1 (mSoftc, MR_ADDR (port, GMAC_IRQ_SRC));
- CSR_READ_1 (sc, MR_ADDR (port, GMAC_IRQ_SRC));
// Clear MIB stats msk_stats_clear (sc_if); // Disable FCS
- GMAC_WRITE_2 (mSoftc, port, GM_RX_CTRL, GM_RXCR_CRC_DIS);
- GMAC_WRITE_2 (sc, port, GM_RX_CTRL, GM_RXCR_CRC_DIS);
// Setup Transmit Control Register
- GMAC_WRITE_2 (mSoftc, port, GM_TX_CTRL, TX_COL_THR (TX_COL_DEF));
- GMAC_WRITE_2 (sc, port, GM_TX_CTRL, TX_COL_THR (TX_COL_DEF));
// Setup Transmit Flow Control Register
- GMAC_WRITE_2 (mSoftc, port, GM_TX_FLOW_CTRL, 0xffff);
- GMAC_WRITE_2 (sc, port, GM_TX_FLOW_CTRL, 0xffff);
// Setup Transmit Parameter Register
- GMAC_WRITE_2 (mSoftc, port, GM_TX_PARAM,
- GMAC_WRITE_2 (sc, port, GM_TX_PARAM, TX_JAM_LEN_VAL (TX_JAM_LEN_DEF) | TX_JAM_IPG_VAL (TX_JAM_IPG_DEF) | TX_IPG_JAM_DATA(TX_IPG_JAM_DEF) | TX_BACK_OFF_LIM(TX_BOF_LIM_DEF));
gmac = DATA_BLIND_VAL (DATA_BLIND_DEF) | GM_SMOD_VLAN_ENA | IPG_DATA_VAL (IPG_DATA_DEF);
- GMAC_WRITE_2 (mSoftc, port, GM_SERIAL_MODE, gmac);
- GMAC_WRITE_2 (sc, port, GM_SERIAL_MODE, gmac);
// Set station address eaddr = sc_if->MacAddress.Addr;
- GMAC_WRITE_2 (mSoftc, port, GM_SRC_ADDR_1L, eaddr[0] | (eaddr[1] << 8));
- GMAC_WRITE_2 (mSoftc, port, GM_SRC_ADDR_1M, eaddr[2] | (eaddr[3] << 8));
- GMAC_WRITE_2 (mSoftc, port, GM_SRC_ADDR_1H, eaddr[4] | (eaddr[5] << 8));
- GMAC_WRITE_2 (mSoftc, port, GM_SRC_ADDR_2L, eaddr[0] | (eaddr[1] << 8));
- GMAC_WRITE_2 (mSoftc, port, GM_SRC_ADDR_2M, eaddr[2] | (eaddr[3] << 8));
- GMAC_WRITE_2 (mSoftc, port, GM_SRC_ADDR_2H, eaddr[4] | (eaddr[5] << 8));
- GMAC_WRITE_2 (sc, port, GM_SRC_ADDR_1L, eaddr[0] | (eaddr[1] << 8));
- GMAC_WRITE_2 (sc, port, GM_SRC_ADDR_1M, eaddr[2] | (eaddr[3] << 8));
- GMAC_WRITE_2 (sc, port, GM_SRC_ADDR_1H, eaddr[4] | (eaddr[5] << 8));
- GMAC_WRITE_2 (sc, port, GM_SRC_ADDR_2L, eaddr[0] | (eaddr[1] << 8));
- GMAC_WRITE_2 (sc, port, GM_SRC_ADDR_2M, eaddr[2] | (eaddr[3] << 8));
- GMAC_WRITE_2 (sc, port, GM_SRC_ADDR_2H, eaddr[4] | (eaddr[5] << 8));
// Disable interrupts for counter overflows
- GMAC_WRITE_2 (mSoftc, port, GM_TX_IRQ_MSK, 0);
- GMAC_WRITE_2 (mSoftc, port, GM_RX_IRQ_MSK, 0);
- GMAC_WRITE_2 (mSoftc, port, GM_TR_IRQ_MSK, 0);
- GMAC_WRITE_2 (sc, port, GM_TX_IRQ_MSK, 0);
- GMAC_WRITE_2 (sc, port, GM_RX_IRQ_MSK, 0);
- GMAC_WRITE_2 (sc, port, GM_TR_IRQ_MSK, 0);
// Configure Rx MAC FIFO
- CSR_WRITE_4 (mSoftc, MR_ADDR (port, RX_GMF_CTRL_T), GMF_RST_SET);
- CSR_WRITE_4 (mSoftc, MR_ADDR (port, RX_GMF_CTRL_T), GMF_RST_CLR);
- CSR_WRITE_4 (sc, MR_ADDR (port, RX_GMF_CTRL_T), GMF_RST_SET);
- CSR_WRITE_4 (sc, MR_ADDR (port, RX_GMF_CTRL_T), GMF_RST_CLR); reg = GMF_OPER_ON | GMF_RX_F_FL_ON;
- if (mSoftc->msk_hw_id == CHIP_ID_YUKON_FE_P || mSoftc->msk_hw_id == CHIP_ID_YUKON_EX) {
- if (sc->msk_hw_id == CHIP_ID_YUKON_FE_P || sc->msk_hw_id == CHIP_ID_YUKON_EX) { reg |= GMF_RX_OVER_ON; }
- CSR_WRITE_4 (mSoftc, MR_ADDR (port, RX_GMF_CTRL_T), reg);
- CSR_WRITE_4 (sc, MR_ADDR (port, RX_GMF_CTRL_T), reg);
- if (mSoftc->msk_hw_id == CHIP_ID_YUKON_XL) {
- if (sc->msk_hw_id == CHIP_ID_YUKON_XL) { // Clear flush mask - HW bug
- CSR_WRITE_4 (mSoftc, MR_ADDR (port, RX_GMF_FL_MSK), 0);
- CSR_WRITE_4 (sc, MR_ADDR (port, RX_GMF_FL_MSK), 0); } else { // Flush Rx MAC FIFO on any flow control or error
- CSR_WRITE_4 (mSoftc, MR_ADDR (port, RX_GMF_FL_MSK), GMR_FS_ANY_ERR);
- CSR_WRITE_4 (sc, MR_ADDR (port, RX_GMF_FL_MSK), GMR_FS_ANY_ERR); }
// @@ -2454,58 +2520,58 @@ msk_init ( // reg = RX_GMF_FL_THR_DEF + 1; // Another magic for Yukon FE+ - From Linux
- if (mSoftc->msk_hw_id == CHIP_ID_YUKON_FE_P && mSoftc->msk_hw_rev == CHIP_REV_YU_FE_P_A0) {
- if (sc->msk_hw_id == CHIP_ID_YUKON_FE_P && sc->msk_hw_rev == CHIP_REV_YU_FE_P_A0) { reg = 0x178; }
- CSR_WRITE_2 (mSoftc, MR_ADDR (port, RX_GMF_FL_THR), reg);
- CSR_WRITE_2 (sc, MR_ADDR (port, RX_GMF_FL_THR), reg);
// Configure Tx MAC FIFO
- CSR_WRITE_4 (mSoftc, MR_ADDR (port, TX_GMF_CTRL_T), GMF_RST_SET);
- CSR_WRITE_4 (mSoftc, MR_ADDR (port, TX_GMF_CTRL_T), GMF_RST_CLR);
- CSR_WRITE_4 (mSoftc, MR_ADDR (port, TX_GMF_CTRL_T), GMF_OPER_ON);
- CSR_WRITE_4 (sc, MR_ADDR (port, TX_GMF_CTRL_T), GMF_RST_SET);
- CSR_WRITE_4 (sc, MR_ADDR (port, TX_GMF_CTRL_T), GMF_RST_CLR);
- CSR_WRITE_4 (sc, MR_ADDR (port, TX_GMF_CTRL_T), GMF_OPER_ON);
// Configure hardware VLAN tag insertion/stripping msk_setvlan (sc_if); if ((sc_if->msk_flags & MSK_FLAG_RAMBUF) == 0) { // Set Rx Pause threshould.
- CSR_WRITE_2 (mSoftc, MR_ADDR (port, RX_GMF_LP_THR), MSK_ECU_LLPP);
- CSR_WRITE_2 (mSoftc, MR_ADDR (port, RX_GMF_UP_THR), MSK_ECU_ULPP);
- CSR_WRITE_2 (sc, MR_ADDR (port, RX_GMF_LP_THR), MSK_ECU_LLPP);
- CSR_WRITE_2 (sc, MR_ADDR (port, RX_GMF_UP_THR), MSK_ECU_ULPP); // Configure store-and-forward for Tx. msk_set_tx_stfwd (sc_if); }
- if (mSoftc->msk_hw_id == CHIP_ID_YUKON_FE_P && mSoftc->msk_hw_rev == CHIP_REV_YU_FE_P_A0) {
- if (sc->msk_hw_id == CHIP_ID_YUKON_FE_P && sc->msk_hw_rev == CHIP_REV_YU_FE_P_A0) { // Disable dynamic watermark - from Linux
- reg = CSR_READ_4 (mSoftc, MR_ADDR (port, TX_GMF_EA));
- reg = CSR_READ_4 (sc, MR_ADDR (port, TX_GMF_EA)); reg &= ~0x03;
- CSR_WRITE_4 (mSoftc, MR_ADDR (port, TX_GMF_EA), reg);
- CSR_WRITE_4 (sc, MR_ADDR (port, TX_GMF_EA), reg); }
// // Disable Force Sync bit and Alloc bit in Tx RAM interface // arbiter as we don't use Sync Tx queue. //
- CSR_WRITE_1 (mSoftc, MR_ADDR (port, TXA_CTRL), TXA_DIS_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC);
- CSR_WRITE_1 (sc, MR_ADDR (port, TXA_CTRL), TXA_DIS_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC); // Enable the RAM Interface Arbiter
- CSR_WRITE_1 (mSoftc, MR_ADDR (port, TXA_CTRL), TXA_ENA_ARB);
- CSR_WRITE_1 (sc, MR_ADDR (port, TXA_CTRL), TXA_ENA_ARB);
// Setup RAM buffer msk_set_rambuffer (sc_if); // Disable Tx sync Queue
- CSR_WRITE_1 (mSoftc, RB_ADDR (sc_if->msk_txsq, RB_CTRL), RB_RST_SET);
- CSR_WRITE_1 (sc, RB_ADDR (sc_if->msk_txsq, RB_CTRL), RB_RST_SET);
// Setup Tx Queue Bus Memory Interface
- CSR_WRITE_4 (mSoftc, Q_ADDR (sc_if->msk_txq, Q_CSR), BMU_CLR_RESET);
- CSR_WRITE_4 (mSoftc, Q_ADDR (sc_if->msk_txq, Q_CSR), BMU_OPER_INIT);
- CSR_WRITE_4 (mSoftc, Q_ADDR (sc_if->msk_txq, Q_CSR), BMU_FIFO_OP_ON);
- CSR_WRITE_2 (mSoftc, Q_ADDR (sc_if->msk_txq, Q_WM), MSK_BMU_TX_WM);
- switch (mSoftc->msk_hw_id) {
- CSR_WRITE_4 (sc, Q_ADDR (sc_if->msk_txq, Q_CSR), BMU_CLR_RESET);
- CSR_WRITE_4 (sc, Q_ADDR (sc_if->msk_txq, Q_CSR), BMU_OPER_INIT);
- CSR_WRITE_4 (sc, Q_ADDR (sc_if->msk_txq, Q_CSR), BMU_FIFO_OP_ON);
- CSR_WRITE_2 (sc, Q_ADDR (sc_if->msk_txq, Q_WM), MSK_BMU_TX_WM);
- switch (sc->msk_hw_id) { case CHIP_ID_YUKON_EC_U:
if (mSoftc->msk_hw_rev == CHIP_REV_YU_EC_U_A0) {
if (sc->msk_hw_rev == CHIP_REV_YU_EC_U_A0) { // Fix for Yukon-EC Ultra: set BMU FIFO level
CSR_WRITE_2 (mSoftc, Q_ADDR (sc_if->msk_txq, Q_AL), MSK_ECU_TXFF_LEV);
CSR_WRITE_2 (sc, Q_ADDR (sc_if->msk_txq, Q_AL), MSK_ECU_TXFF_LEV); } break; case CHIP_ID_YUKON_EX:@@ -2513,68 +2579,68 @@ msk_init ( // Yukon Extreme seems to have silicon bug for // automatic Tx checksum calculation capability. //
if (mSoftc->msk_hw_rev == CHIP_REV_YU_EX_B0) {CSR_WRITE_4 (mSoftc, Q_ADDR (sc_if->msk_txq, Q_F), F_TX_CHK_AUTO_OFF);
if (sc->msk_hw_rev == CHIP_REV_YU_EX_B0) {CSR_WRITE_4 (sc, Q_ADDR (sc_if->msk_txq, Q_F), F_TX_CHK_AUTO_OFF); } break;// Setup Rx Queue Bus Memory Interface
- CSR_WRITE_4 (mSoftc, Q_ADDR (sc_if->msk_rxq, Q_CSR), BMU_CLR_RESET);
- CSR_WRITE_4 (mSoftc, Q_ADDR (sc_if->msk_rxq, Q_CSR), BMU_OPER_INIT);
- CSR_WRITE_4 (mSoftc, Q_ADDR (sc_if->msk_rxq, Q_CSR), BMU_FIFO_OP_ON);
- CSR_WRITE_2 (mSoftc, Q_ADDR (sc_if->msk_rxq, Q_WM), MSK_BMU_RX_WM);
- if (mSoftc->msk_hw_id == CHIP_ID_YUKON_EC_U && mSoftc->msk_hw_rev >= CHIP_REV_YU_EC_U_A1) {
- CSR_WRITE_4 (sc, Q_ADDR (sc_if->msk_rxq, Q_CSR), BMU_CLR_RESET);
- CSR_WRITE_4 (sc, Q_ADDR (sc_if->msk_rxq, Q_CSR), BMU_OPER_INIT);
- CSR_WRITE_4 (sc, Q_ADDR (sc_if->msk_rxq, Q_CSR), BMU_FIFO_OP_ON);
- CSR_WRITE_2 (sc, Q_ADDR (sc_if->msk_rxq, Q_WM), MSK_BMU_RX_WM);
- if (sc->msk_hw_id == CHIP_ID_YUKON_EC_U && sc->msk_hw_rev >= CHIP_REV_YU_EC_U_A1) { // MAC Rx RAM Read is controlled by hardware
- CSR_WRITE_4 (mSoftc, Q_ADDR (sc_if->msk_rxq, Q_F), F_M_RX_RAM_DIS);
- CSR_WRITE_4 (sc, Q_ADDR (sc_if->msk_rxq, Q_F), F_M_RX_RAM_DIS); }
// truncate too-large frames - from linux
- CSR_WRITE_4 (mSoftc, MR_ADDR (port, RX_GMF_TR_THR), 0x17a);
- CSR_WRITE_4 (mSoftc, MR_ADDR (port, RX_GMF_CTRL_T), RX_TRUNC_ON);
- CSR_WRITE_4 (sc, MR_ADDR (port, RX_GMF_TR_THR), 0x17a);
- CSR_WRITE_4 (sc, MR_ADDR (port, RX_GMF_CTRL_T), RX_TRUNC_ON);
- msk_set_prefetch (sc_if->msk_txq, sc_if->msk_rdata.msk_tx_ring_paddr, MSK_TX_RING_CNT - 1);
- msk_set_prefetch (sc_if, sc_if->msk_txq, sc_if->msk_rdata.msk_tx_ring_paddr, MSK_TX_RING_CNT - 1); msk_init_tx_ring (sc_if);
// Disable Rx checksum offload and RSS hash
- CSR_WRITE_4 (mSoftc, Q_ADDR (sc_if->msk_rxq, Q_CSR), BMU_DIS_RX_CHKSUM | BMU_DIS_RX_RSS_HASH);
- msk_set_prefetch (sc_if->msk_rxq, sc_if->msk_rdata.msk_rx_ring_paddr, MSK_RX_RING_CNT - 1);
- CSR_WRITE_4 (sc, Q_ADDR (sc_if->msk_rxq, Q_CSR), BMU_DIS_RX_CHKSUM | BMU_DIS_RX_RSS_HASH);
- msk_set_prefetch (sc_if, sc_if->msk_rxq, sc_if->msk_rdata.msk_rx_ring_paddr, MSK_RX_RING_CNT - 1); Status = msk_init_rx_ring (sc_if); if (EFI_ERROR (Status)) { DEBUG ((EFI_D_ERROR, "Marvell Yukon: Initialization failed: no memory for Rx buffers\n"));
- msk_stop (sc_if);
- mskc_stop_if (sc_if); return Status; }
- if (mSoftc->msk_hw_id == CHIP_ID_YUKON_EX) {
- if (sc->msk_hw_id == CHIP_ID_YUKON_EX) { // Disable flushing of non-ASF packets
- CSR_WRITE_4 (mSoftc, MR_ADDR (port, RX_GMF_CTRL_T), GMF_RX_MACSEC_FLUSH_OFF);
- CSR_WRITE_4 (sc, MR_ADDR (port, RX_GMF_CTRL_T), GMF_RX_MACSEC_FLUSH_OFF); }
// Configure interrupt handling if (port == MSK_PORT_A) {
- mSoftc->msk_intrmask |= Y2_IS_PORT_A;
- mSoftc->msk_intrhwemask |= Y2_HWE_L1_MASK;
- sc->msk_intrmask |= Y2_IS_PORT_A;
- sc->msk_intrhwemask |= Y2_HWE_L1_MASK; } else {
- mSoftc->msk_intrmask |= Y2_IS_PORT_B;
- mSoftc->msk_intrhwemask |= Y2_HWE_L2_MASK;
- sc->msk_intrmask |= Y2_IS_PORT_B;
- sc->msk_intrhwemask |= Y2_HWE_L2_MASK; } // Configure IRQ moderation mask.
- CSR_WRITE_4 (mSoftc, B2_IRQM_MSK, mSoftc->msk_intrmask);
- if (mSoftc->msk_int_holdoff > 0) {
- CSR_WRITE_4 (sc, B2_IRQM_MSK, sc->msk_intrmask);
- if (sc->msk_int_holdoff > 0) { // Configure initial IRQ moderation timer value.
- CSR_WRITE_4 (mSoftc, B2_IRQM_INI, MSK_USECS (mSoftc, mSoftc->msk_int_holdoff));
- CSR_WRITE_4 (mSoftc, B2_IRQM_VAL, MSK_USECS (mSoftc, mSoftc->msk_int_holdoff));
- CSR_WRITE_4 (sc, B2_IRQM_INI, MSK_USECS (sc, sc->msk_int_holdoff));
- CSR_WRITE_4 (sc, B2_IRQM_VAL, MSK_USECS (sc, sc->msk_int_holdoff)); // Start IRQ moderation.
- CSR_WRITE_1 (mSoftc, B2_IRQM_CTRL, TIM_START);
- CSR_WRITE_1 (sc, B2_IRQM_CTRL, TIM_START); }
- CSR_WRITE_4 (mSoftc, B0_HWE_IMSK, mSoftc->msk_intrhwemask);
- CSR_READ_4 (mSoftc, B0_HWE_IMSK);
- CSR_WRITE_4 (mSoftc, B0_IMSK, mSoftc->msk_intrmask);
- CSR_READ_4 (mSoftc, B0_IMSK);
- CSR_WRITE_4 (sc, B0_HWE_IMSK, sc->msk_intrhwemask);
- CSR_READ_4 (sc, B0_HWE_IMSK);
- CSR_WRITE_4 (sc, B0_IMSK, sc->msk_intrmask);
- CSR_READ_4 (sc, B0_IMSK);
sc_if->msk_flags &= ~MSK_FLAG_LINK;
- e1000phy_mediachg ();
- e1000phy_mediachg (sc_if->phy_softc);
return Status; } @@ -2586,107 +2652,121 @@ msk_set_rambuffer ( ) { INTN ltpp, utpp;
- INTN port = sc_if->msk_md.port;
- INTN port;
- struct msk_softc *sc;
- sc = sc_if->msk_softc;
- port = sc_if->msk_md.port;
if ((sc_if->msk_flags & MSK_FLAG_RAMBUF) == 0) return; // Setup Rx Queue
- CSR_WRITE_1 (mSoftc, RB_ADDR (sc_if->msk_rxq, RB_CTRL), RB_RST_CLR);
- CSR_WRITE_4 (mSoftc, RB_ADDR (sc_if->msk_rxq, RB_START), mSoftc->msk_rxqstart[port] / 8);
- CSR_WRITE_4 (mSoftc, RB_ADDR (sc_if->msk_rxq, RB_END), mSoftc->msk_rxqend[port] / 8);
- CSR_WRITE_4 (mSoftc, RB_ADDR (sc_if->msk_rxq, RB_WP), mSoftc->msk_rxqstart[port] / 8);
- CSR_WRITE_4 (mSoftc, RB_ADDR (sc_if->msk_rxq, RB_RP), mSoftc->msk_rxqstart[port] / 8);
- utpp = (mSoftc->msk_rxqend[port] + 1 - mSoftc->msk_rxqstart[port] - MSK_RB_ULPP) / 8;
- ltpp = (mSoftc->msk_rxqend[port] + 1 - mSoftc->msk_rxqstart[port] - MSK_RB_LLPP_B) / 8;
- if (mSoftc->msk_rxqsize < MSK_MIN_RXQ_SIZE) {
- CSR_WRITE_1 (sc, RB_ADDR (sc_if->msk_rxq, RB_CTRL), RB_RST_CLR);
- CSR_WRITE_4 (sc, RB_ADDR (sc_if->msk_rxq, RB_START), sc->msk_rxqstart[port] / 8);
- CSR_WRITE_4 (sc, RB_ADDR (sc_if->msk_rxq, RB_END), sc->msk_rxqend[port] / 8);
- CSR_WRITE_4 (sc, RB_ADDR (sc_if->msk_rxq, RB_WP), sc->msk_rxqstart[port] / 8);
- CSR_WRITE_4 (sc, RB_ADDR (sc_if->msk_rxq, RB_RP), sc->msk_rxqstart[port] / 8);
- utpp = (sc->msk_rxqend[port] + 1 - sc->msk_rxqstart[port] - MSK_RB_ULPP) / 8;
- ltpp = (sc->msk_rxqend[port] + 1 - sc->msk_rxqstart[port] - MSK_RB_LLPP_B) / 8;
- if (sc->msk_rxqsize < MSK_MIN_RXQ_SIZE) { ltpp += (MSK_RB_LLPP_B - MSK_RB_LLPP_S) / 8; }
- CSR_WRITE_4 (mSoftc, RB_ADDR (sc_if->msk_rxq, RB_RX_UTPP), utpp);
- CSR_WRITE_4 (mSoftc, RB_ADDR (sc_if->msk_rxq, RB_RX_LTPP), ltpp);
- CSR_WRITE_4 (sc, RB_ADDR (sc_if->msk_rxq, RB_RX_UTPP), utpp);
- CSR_WRITE_4 (sc, RB_ADDR (sc_if->msk_rxq, RB_RX_LTPP), ltpp); // Set Rx priority (RB_RX_UTHP/RB_RX_LTHP) thresholds?
- CSR_WRITE_1 (mSoftc, RB_ADDR (sc_if->msk_rxq, RB_CTRL), RB_ENA_OP_MD);
- CSR_READ_1 (mSoftc, RB_ADDR (sc_if->msk_rxq, RB_CTRL));
- CSR_WRITE_1 (sc, RB_ADDR (sc_if->msk_rxq, RB_CTRL), RB_ENA_OP_MD);
- CSR_READ_1 (sc, RB_ADDR (sc_if->msk_rxq, RB_CTRL));
// Setup Tx Queue.
- CSR_WRITE_1 (mSoftc, RB_ADDR (sc_if->msk_txq, RB_CTRL), RB_RST_CLR);
- CSR_WRITE_4 (mSoftc, RB_ADDR (sc_if->msk_txq, RB_START), mSoftc->msk_txqstart[port] / 8);
- CSR_WRITE_4 (mSoftc, RB_ADDR (sc_if->msk_txq, RB_END), mSoftc->msk_txqend[port] / 8);
- CSR_WRITE_4 (mSoftc, RB_ADDR (sc_if->msk_txq, RB_WP), mSoftc->msk_txqstart[port] / 8);
- CSR_WRITE_4 (mSoftc, RB_ADDR (sc_if->msk_txq, RB_RP), mSoftc->msk_txqstart[port] / 8);
- CSR_WRITE_1 (sc, RB_ADDR (sc_if->msk_txq, RB_CTRL), RB_RST_CLR);
- CSR_WRITE_4 (sc, RB_ADDR (sc_if->msk_txq, RB_START), sc->msk_txqstart[port] / 8);
- CSR_WRITE_4 (sc, RB_ADDR (sc_if->msk_txq, RB_END), sc->msk_txqend[port] / 8);
- CSR_WRITE_4 (sc, RB_ADDR (sc_if->msk_txq, RB_WP), sc->msk_txqstart[port] / 8);
- CSR_WRITE_4 (sc, RB_ADDR (sc_if->msk_txq, RB_RP), sc->msk_txqstart[port] / 8);
// Enable Store & Forward for Tx side
- CSR_WRITE_1 (mSoftc, RB_ADDR (sc_if->msk_txq, RB_CTRL), RB_ENA_STFWD);
- CSR_WRITE_1 (mSoftc, RB_ADDR (sc_if->msk_txq, RB_CTRL), RB_ENA_OP_MD);
- CSR_READ_1 (mSoftc, RB_ADDR (sc_if->msk_txq, RB_CTRL));
- CSR_WRITE_1 (sc, RB_ADDR (sc_if->msk_txq, RB_CTRL), RB_ENA_STFWD);
- CSR_WRITE_1 (sc, RB_ADDR (sc_if->msk_txq, RB_CTRL), RB_ENA_OP_MD);
- CSR_READ_1 (sc, RB_ADDR (sc_if->msk_txq, RB_CTRL)); }
STATIC VOID msk_set_prefetch (
- struct msk_if_softc *sc_if, INTN qaddr, EFI_PHYSICAL_ADDRESS addr, UINT32 count ) {
- struct msk_softc *sc;
- sc = sc_if->msk_softc;
- // Reset the prefetch unit
- CSR_WRITE_4 (mSoftc, Y2_PREF_Q_ADDR (qaddr, PREF_UNIT_CTRL_REG), PREF_UNIT_RST_SET);
- CSR_WRITE_4 (mSoftc, Y2_PREF_Q_ADDR (qaddr, PREF_UNIT_CTRL_REG), PREF_UNIT_RST_CLR);
- CSR_WRITE_4 (sc, Y2_PREF_Q_ADDR (qaddr, PREF_UNIT_CTRL_REG), PREF_UNIT_RST_SET);
- CSR_WRITE_4 (sc, Y2_PREF_Q_ADDR (qaddr, PREF_UNIT_CTRL_REG), PREF_UNIT_RST_CLR); // Set LE base address
- CSR_WRITE_4 (mSoftc, Y2_PREF_Q_ADDR (qaddr, PREF_UNIT_ADDR_LOW_REG), MSK_ADDR_LO (addr));
- CSR_WRITE_4 (mSoftc, Y2_PREF_Q_ADDR (qaddr, PREF_UNIT_ADDR_HI_REG), MSK_ADDR_HI (addr));
- CSR_WRITE_4 (sc, Y2_PREF_Q_ADDR (qaddr, PREF_UNIT_ADDR_LOW_REG), MSK_ADDR_LO (addr));
- CSR_WRITE_4 (sc, Y2_PREF_Q_ADDR (qaddr, PREF_UNIT_ADDR_HI_REG), MSK_ADDR_HI (addr));
// Set the list last index
- CSR_WRITE_2 (mSoftc, Y2_PREF_Q_ADDR (qaddr, PREF_UNIT_LAST_IDX_REG), count);
- CSR_WRITE_2 (sc, Y2_PREF_Q_ADDR (qaddr, PREF_UNIT_LAST_IDX_REG), count); // Turn on prefetch unit
- CSR_WRITE_4 (mSoftc, Y2_PREF_Q_ADDR (qaddr, PREF_UNIT_CTRL_REG), PREF_UNIT_OP_ON);
- CSR_WRITE_4 (sc, Y2_PREF_Q_ADDR (qaddr, PREF_UNIT_CTRL_REG), PREF_UNIT_OP_ON); // Dummy read to ensure write
- CSR_READ_4 (mSoftc, Y2_PREF_Q_ADDR (qaddr, PREF_UNIT_CTRL_REG));
- CSR_READ_4 (sc, Y2_PREF_Q_ADDR (qaddr, PREF_UNIT_CTRL_REG)); }
-static VOID -msk_stop (
- struct msk_if_softc *sc_if
+mskc_stop_if (
- struct msk_if_softc *sc_if ) { struct msk_txdesc *txd; struct msk_rxdesc *rxd; UINT32 val; INTN i;
- INTN port = sc_if->msk_md.port;
- INTN port;
- EFI_PCI_IO_PROTOCOL *PciIo;
- struct msk_softc *sc;
- sc = sc_if->msk_softc;
- PciIo = sc->PciIo;
- port = sc_if->msk_md.port;
// Disable interrupts if (port == MSK_PORT_A) {
- mSoftc->msk_intrmask &= ~Y2_IS_PORT_A;
- mSoftc->msk_intrhwemask &= ~Y2_HWE_L1_MASK;
- sc->msk_intrmask &= ~Y2_IS_PORT_A;
- sc->msk_intrhwemask &= ~Y2_HWE_L1_MASK; } else {
- mSoftc->msk_intrmask &= ~Y2_IS_PORT_B;
- mSoftc->msk_intrhwemask &= ~Y2_HWE_L2_MASK;
- sc->msk_intrmask &= ~Y2_IS_PORT_B;
- sc->msk_intrhwemask &= ~Y2_HWE_L2_MASK; }
- CSR_WRITE_4 (mSoftc, B0_HWE_IMSK, mSoftc->msk_intrhwemask);
- CSR_READ_4 (mSoftc, B0_HWE_IMSK);
- CSR_WRITE_4 (mSoftc, B0_IMSK, mSoftc->msk_intrmask);
- CSR_READ_4 (mSoftc, B0_IMSK);
- CSR_WRITE_4 (sc, B0_HWE_IMSK, sc->msk_intrhwemask);
- CSR_READ_4 (sc, B0_HWE_IMSK);
- CSR_WRITE_4 (sc, B0_IMSK, sc->msk_intrmask);
- CSR_READ_4 (sc, B0_IMSK);
// Disable Tx/Rx MAC.
- val = GMAC_READ_2 (mSoftc, port, GM_GP_CTRL);
- val = GMAC_READ_2 (sc, port, GM_GP_CTRL); val &= ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA);
- GMAC_WRITE_2 (mSoftc, port, GM_GP_CTRL, val);
- GMAC_WRITE_2 (sc, port, GM_GP_CTRL, val); // Read again to ensure writing.
- GMAC_READ_2 (mSoftc, port, GM_GP_CTRL);
- GMAC_READ_2 (sc, port, GM_GP_CTRL); // Update stats and clear counters msk_stats_update (sc_if);
// Stop Tx BMU
- CSR_WRITE_4 (mSoftc, Q_ADDR (sc_if->msk_txq, Q_CSR), BMU_STOP);
- val = CSR_READ_4 (mSoftc, Q_ADDR (sc_if->msk_txq, Q_CSR));
- CSR_WRITE_4 (sc, Q_ADDR (sc_if->msk_txq, Q_CSR), BMU_STOP);
- val = CSR_READ_4 (sc, Q_ADDR (sc_if->msk_txq, Q_CSR)); for (i = 0; i < MSK_TIMEOUT; i++) { if ((val & (BMU_STOP | BMU_IDLE)) == 0) {
CSR_WRITE_4 (mSoftc, Q_ADDR (sc_if->msk_txq, Q_CSR), BMU_STOP);val = CSR_READ_4 (mSoftc, Q_ADDR (sc_if->msk_txq, Q_CSR));
CSR_WRITE_4 (sc, Q_ADDR (sc_if->msk_txq, Q_CSR), BMU_STOP);val = CSR_READ_4 (sc, Q_ADDR (sc_if->msk_txq, Q_CSR)); } else { break; }@@ -2695,29 +2775,29 @@ msk_stop ( if (i == MSK_TIMEOUT) { DEBUG ((EFI_D_NET, "Marvell Yukon: Tx BMU stop failed\n")); }
- CSR_WRITE_1 (mSoftc, RB_ADDR (sc_if->msk_txq, RB_CTRL), RB_RST_SET | RB_DIS_OP_MD);
- CSR_WRITE_1 (sc, RB_ADDR (sc_if->msk_txq, RB_CTRL), RB_RST_SET | RB_DIS_OP_MD);
// Disable all GMAC interrupt.
- CSR_WRITE_1 (mSoftc, MR_ADDR (port, GMAC_IRQ_MSK), 0);
- CSR_WRITE_1 (sc, MR_ADDR (port, GMAC_IRQ_MSK), 0); // Disable PHY interrupt. */
- msk_phy_writereg (port, PHY_MARV_INT_MASK, 0);
- msk_phy_writereg (sc_if, PHY_MARV_INT_MASK, 0);
// Disable the RAM Interface Arbiter.
- CSR_WRITE_1 (mSoftc, MR_ADDR (port, TXA_CTRL), TXA_DIS_ARB);
- CSR_WRITE_1 (sc, MR_ADDR (port, TXA_CTRL), TXA_DIS_ARB);
// Reset the PCI FIFO of the async Tx queue
- CSR_WRITE_4 (mSoftc, Q_ADDR (sc_if->msk_txq, Q_CSR), BMU_RST_SET | BMU_FIFO_RST);
- CSR_WRITE_4 (sc, Q_ADDR (sc_if->msk_txq, Q_CSR), BMU_RST_SET | BMU_FIFO_RST);
// Reset the Tx prefetch units
- CSR_WRITE_4 (mSoftc, Y2_PREF_Q_ADDR (sc_if->msk_txq, PREF_UNIT_CTRL_REG), PREF_UNIT_RST_SET);
- CSR_WRITE_4 (sc, Y2_PREF_Q_ADDR (sc_if->msk_txq, PREF_UNIT_CTRL_REG), PREF_UNIT_RST_SET);
// Reset the RAM Buffer async Tx queue
- CSR_WRITE_1 (mSoftc, RB_ADDR (sc_if->msk_txq, RB_CTRL), RB_RST_SET);
- CSR_WRITE_1 (sc, RB_ADDR (sc_if->msk_txq, RB_CTRL), RB_RST_SET);
// Reset Tx MAC FIFO.
- CSR_WRITE_4 (mSoftc, MR_ADDR (port, TX_GMF_CTRL_T), GMF_RST_SET);
- CSR_WRITE_4 (sc, MR_ADDR (port, TX_GMF_CTRL_T), GMF_RST_SET); // Set Pause Off.
- CSR_WRITE_4 (mSoftc, MR_ADDR (port, GMAC_CTRL), GMC_PAUSE_OFF);
- CSR_WRITE_4 (sc, MR_ADDR (port, GMAC_CTRL), GMC_PAUSE_OFF);
/* * The Rx Stop command will not work for Yukon-2 if the BMU does not @@ -2731,9 +2811,9 @@ msk_stop ( */ // Disable the RAM Buffer receive queue
- CSR_WRITE_1 (mSoftc, RB_ADDR (sc_if->msk_rxq, RB_CTRL), RB_DIS_OP_MD);
- CSR_WRITE_1 (sc, RB_ADDR (sc_if->msk_rxq, RB_CTRL), RB_DIS_OP_MD); for (i = 0; i < MSK_TIMEOUT; i++) {
- if (CSR_READ_1 (mSoftc, RB_ADDR (sc_if->msk_rxq, Q_RSL)) == CSR_READ_1 (mSoftc, RB_ADDR (sc_if->msk_rxq, Q_RL))) {
- if (CSR_READ_1 (sc, RB_ADDR (sc_if->msk_rxq, Q_RSL)) == CSR_READ_1 (sc, RB_ADDR (sc_if->msk_rxq, Q_RL))) { break; } gBS->Stall (1);
@@ -2741,19 +2821,19 @@ msk_stop ( if (i == MSK_TIMEOUT) { DEBUG ((EFI_D_NET, "Marvell Yukon: Rx BMU stop failed\n")); }
- CSR_WRITE_4 (mSoftc, Q_ADDR (sc_if->msk_rxq, Q_CSR), BMU_RST_SET | BMU_FIFO_RST);
- CSR_WRITE_4 (sc, Q_ADDR (sc_if->msk_rxq, Q_CSR), BMU_RST_SET | BMU_FIFO_RST); // Reset the Rx prefetch unit.
- CSR_WRITE_4 (mSoftc, Y2_PREF_Q_ADDR (sc_if->msk_rxq, PREF_UNIT_CTRL_REG), PREF_UNIT_RST_SET);
- CSR_WRITE_4 (sc, Y2_PREF_Q_ADDR (sc_if->msk_rxq, PREF_UNIT_CTRL_REG), PREF_UNIT_RST_SET); // Reset the RAM Buffer receive queue.
- CSR_WRITE_1 (mSoftc, RB_ADDR (sc_if->msk_rxq, RB_CTRL), RB_RST_SET);
- CSR_WRITE_1 (sc, RB_ADDR (sc_if->msk_rxq, RB_CTRL), RB_RST_SET); // Reset Rx MAC FIFO.
- CSR_WRITE_4 (mSoftc, MR_ADDR (port, RX_GMF_CTRL_T), GMF_RST_SET);
- CSR_WRITE_4 (sc, MR_ADDR (port, RX_GMF_CTRL_T), GMF_RST_SET);
// Free Rx and Tx mbufs still in the queues for (i = 0; i < MSK_RX_RING_CNT; i++) { rxd = &sc_if->msk_cdata.msk_rxdesc[i]; if (rxd->rx_m.Buf != NULL) {
mPciIo->Unmap (mPciIo, rxd->rx_m.DmaMapping);
PciIo->Unmap (PciIo, rxd->rx_m.DmaMapping); if(rxd->rx_m.Buf != NULL) { gBS->FreePool (rxd->rx_m.Buf); rxd->rx_m.Buf = NULL;@@ -2765,7 +2845,7 @@ msk_stop ( for (i = 0; i < MSK_TX_RING_CNT; i++) { txd = &sc_if->msk_cdata.msk_txdesc[i]; if (txd->tx_m.Buf != NULL) {
mPciIo->Unmap (mPciIo, txd->tx_m.DmaMapping);
PciIo->Unmap (PciIo, txd->tx_m.DmaMapping); gBS->SetMem (&(txd->tx_m), sizeof (MSK_DMA_BUF), 0); // We don't own the transmit buffers so don't free them }@@ -2782,7 +2862,7 @@ msk_stop (
- counter clears high 16 bits of the counter such that accessing
- lower 16 bits should be the last operation.
*/ -#define MSK_READ_MIB32(x, y) (((UINT32)GMAC_READ_2 (mSoftc, x, (y) + 4)) << 16) + (UINT32)GMAC_READ_2 (mSoftc, x, y) +#define MSK_READ_MIB32(x, y) (((UINT32)GMAC_READ_2 (sc, x, (y) + 4)) << 16) + (UINT32)GMAC_READ_2 (sc, x, y) #define MSK_READ_MIB64(x, y) (((UINT64)MSK_READ_MIB32 (x, (y) + 8)) << 32) + (UINT64)MSK_READ_MIB32 (x, y) static @@ -2794,11 +2874,15 @@ msk_stats_clear ( UINT16 gmac; INTN val; INTN i;
- INTN port = sc_if->msk_md.port;
- INTN port;
- struct msk_softc *sc;
- sc = sc_if->msk_softc;
- port = sc_if->msk_md.port;
// Set MIB Clear Counter Mode.
- gmac = GMAC_READ_2 (mSoftc, port, GM_PHY_ADDR);
- GMAC_WRITE_2 (mSoftc, port, GM_PHY_ADDR, gmac | GM_PAR_MIB_CLR);
- gmac = GMAC_READ_2 (sc, port, GM_PHY_ADDR);
- GMAC_WRITE_2 (sc, port, GM_PHY_ADDR, gmac | GM_PAR_MIB_CLR); // Read all MIB Counters with Clear Mode set for (i = GM_RXF_UC_OK; i <= GM_TXE_FIFO_UR; i += sizeof (UINT32)) { val = MSK_READ_MIB32 (port, i);
@@ -2806,7 +2890,7 @@ msk_stats_clear ( } // Clear MIB Clear Counter Mode gmac &= ~GM_PAR_MIB_CLR;
- GMAC_WRITE_2 (mSoftc, port, GM_PHY_ADDR, gmac);
- GMAC_WRITE_2 (sc, port, GM_PHY_ADDR, gmac); }
static @@ -2818,12 +2902,15 @@ msk_stats_update ( struct msk_hw_stats *stats; UINT16 gmac; INTN val;
- INTN port = sc_if->msk_md.port;
- INTN port;
- struct msk_softc *sc;
- sc = sc_if->msk_softc;
- port = sc_if->msk_md.port; stats = &sc_if->msk_stats; /* Set MIB Clear Counter Mode. */
- gmac = GMAC_READ_2 (mSoftc, port, GM_PHY_ADDR);
- GMAC_WRITE_2 (mSoftc, port, GM_PHY_ADDR, gmac | GM_PAR_MIB_CLR);
- gmac = GMAC_READ_2 (sc, port, GM_PHY_ADDR);
- GMAC_WRITE_2 (sc, port, GM_PHY_ADDR, gmac | GM_PAR_MIB_CLR);
/* Rx stats. */ stats->rx_ucast_frames += MSK_READ_MIB32 (port, GM_RXF_UC_OK); @@ -2874,7 +2961,7 @@ msk_stats_update ( /* Clear MIB Clear Counter Mode. */ gmac &= ~GM_PAR_MIB_CLR;
- GMAC_WRITE_2 (mSoftc, port, GM_PHY_ADDR, gmac);
- GMAC_WRITE_2 (sc, port, GM_PHY_ADDR, gmac); }
#undef MSK_READ_MIB32 diff --git a/Drivers/Net/MarvellYukonDxe/if_msk.h b/Drivers/Net/MarvellYukonDxe/if_msk.h index 110c562..861f730 100644 --- a/Drivers/Net/MarvellYukonDxe/if_msk.h +++ b/Drivers/Net/MarvellYukonDxe/if_msk.h @@ -13,20 +13,30 @@
**/ +#ifndef _IF_MSK_H_ +#define _IF_MSK_H_
- #include <Uefi.h>
+#include <Protocol/PciIo.h> +#include "miivar.h" +#include "if_mskreg.h"
Can you flip the order of those two include files to preserve ordering (alphabetically within core, Library, Protocol, local - in that order)?
#define MAX_SUPPORTED_PACKET_SIZE (1566) /* No jumbo frame size support */ EFI_STATUS mskc_probe (EFI_PCI_IO_PROTOCOL *PciIo); -EFI_STATUS mskc_attach (EFI_PCI_IO_PROTOCOL *PciIo, EFI_MAC_ADDRESS *Mac); -void mskc_detach (void); +EFI_STATUS mskc_attach (EFI_PCI_IO_PROTOCOL *, struct msk_softc **); +EFI_STATUS mskc_attach_if (struct msk_if_softc *, UINTN); +void mskc_detach (struct msk_softc *); +VOID mskc_detach_if (struct msk_if_softc *); -EFI_STATUS mskc_init (void); -void mskc_shutdown (void); +EFI_STATUS mskc_init (struct msk_if_softc *); +void mskc_shutdown (struct msk_softc *); +VOID mskc_stop_if (struct msk_if_softc *); void mskc_rxfilter (
- IN struct msk_if_softc *sc_if, IN UINT32 FilterFlags, IN UINTN MCastFilterCnt, IN EFI_MAC_ADDRESS *MCastFilter
@@ -34,18 +44,23 @@ mskc_rxfilter ( EFI_STATUS mskc_transmit (
- IN struct msk_if_softc *sc_if, IN UINTN BufferSize, IN VOID *Buffer );
EFI_STATUS mskc_receive (
- IN struct msk_if_softc *sc_if, IN OUT UINTN *BufferSize, OUT VOID *Buffer );
void mskc_getstatus (
- IN struct msk_if_softc *sc, OUT UINT32 *InterruptStatus, OPTIONAL OUT VOID **TxBuf OPTIONAL );
+#endif /* _IF_MSK_H_ */ diff --git a/Drivers/Net/MarvellYukonDxe/if_mskreg.h b/Drivers/Net/MarvellYukonDxe/if_mskreg.h index 7718536..261639a 100644 --- a/Drivers/Net/MarvellYukonDxe/if_mskreg.h +++ b/Drivers/Net/MarvellYukonDxe/if_mskreg.h @@ -99,6 +99,9 @@ /*$FreeBSD: src/sys/dev/msk/if_mskreg.h,v 1.27.2.10.2.1 2010/06/14 02:09:06 kensmith Exp $*/ +#ifndef _IF_MSKREG_H_ +#define _IF_MSKREG_H_
- /*
*/
- SysKonnect PCI vendor ID
@@ -2460,10 +2463,8 @@ struct msk_softc { INTN msk_int_holdoff; INTN msk_process_limit; INTN msk_stat_cons;
- LIST_ENTRY TransmitQueueHead;
- LIST_ENTRY TransmitFreeQueueHead;
- LIST_ENTRY ReceiveQueueHead; EFI_EVENT Timer;
- EFI_PCI_IO_PROTOCOL *PciIo; };
#define MSK_USECS(sc, us) ((sc)->msk_clock * (us)) @@ -2497,9 +2498,16 @@ struct msk_if_softc { struct msk_chain_data msk_cdata; struct msk_ring_data msk_rdata; struct msk_hw_stats msk_stats;
- struct msk_softc *msk_softc; /* parent controller */
- VOID *phy_softc; /* interface phy */
- LIST_ENTRY TransmitQueueHead;
- LIST_ENTRY TransmitFreeQueueHead;
- LIST_ENTRY ReceiveQueueHead; EFI_MAC_ADDRESS MacAddress; };
#define MSK_TIMEOUT 1000 #define MSK_PHY_POWERUP 1 #define MSK_PHY_POWERDOWN 0
+#endif /* _IF_MSKREG_H_ */ diff --git a/Drivers/Net/MarvellYukonDxe/miivar.h b/Drivers/Net/MarvellYukonDxe/miivar.h index 1903ef6..ff28017 100644 --- a/Drivers/Net/MarvellYukonDxe/miivar.h +++ b/Drivers/Net/MarvellYukonDxe/miivar.h @@ -55,13 +55,6 @@ #define _DEV_MII_MIIVAR_H_ /*
- Callbacks from MII layer into network interface device driver.
- */
-INTN msk_phy_readreg (INTN, INTN); -INTN msk_phy_writereg (INTN, INTN, INTN); -void msk_miibus_statchg (INTN);
-/*
- A network interface driver has one of these structures in its softc.
- It is the interface from the network interface driver to the MII
- layer.
@@ -181,9 +174,9 @@ struct mii_phydesc { #define MII_PHY_DESC(a, b) { MII_OUI_ ## a, MII_MODEL_ ## a ## _ ## b, MII_STR_ ## a ## _ ## b } #define MII_PHY_END { 0, 0, NULL } -#define PHY_READ(p, r) msk_phy_readreg ((p)->mmd->port, (r)) +#define PHY_READ(p, r) msk_phy_readreg ((p)->sc_if, (r)) -#define PHY_WRITE(p, r, v) msk_phy_writereg ((p)->mmd->port, (r), (v)) +#define PHY_WRITE(p, r, v) msk_phy_writereg ((p)->sc_if, (r), (v)) struct msk_mii_data { INTN port; @@ -191,8 +184,4 @@ struct msk_mii_data { INTN mii_flags; }; -EFI_STATUS e1000_probe_and_attach (struct mii_data *mii, const struct msk_mii_data *mmd); -void e1000phy_tick (void); -void e1000phy_mediachg (void);
- #endif /* _DEV_MII_MIIVAR_H_ */
-- 2.7.4
Linaro-uefi mailing list Linaro-uefi@lists.linaro.org https://lists.linaro.org/mailman/listinfo/linaro-uefi