On Sat, Nov 19, 2016 at 04:37:23PM +0800, Heyi Guo wrote:
Hi1616 has 10 I2C ports and the IP of I2C controller is DesignWare v2, which requires to write I2C_CMD_STOP bit (BIT9) for the last transfer.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Heyi Guo heyi.guo@linaro.org Reviewed-by: Leif Lindholm leif.lindholm@linaro.org
Pushed as f98d94acfb3856129eb37c9c2219b86c73cc75ff.
Chips/Hisilicon/Include/Library/I2CLib.h | 2 +- Chips/Hisilicon/Library/I2CLib/I2CHw.h | 1 + Chips/Hisilicon/Library/I2CLib/I2CLib.c | 50 +++++++++----------------------- 3 files changed, 15 insertions(+), 38 deletions(-)
diff --git a/Chips/Hisilicon/Include/Library/I2CLib.h b/Chips/Hisilicon/Include/Library/I2CLib.h index c3597f6..36e9f5f 100644 --- a/Chips/Hisilicon/Include/Library/I2CLib.h +++ b/Chips/Hisilicon/Include/Library/I2CLib.h @@ -33,7 +33,7 @@ typedef enum { }SPEED_MODE; -#define I2C_PORT_MAX 9 +#define I2C_PORT_MAX 10 diff --git a/Chips/Hisilicon/Library/I2CLib/I2CHw.h b/Chips/Hisilicon/Library/I2CLib/I2CHw.h index 0937997..aa561e9 100644 --- a/Chips/Hisilicon/Library/I2CLib/I2CHw.h +++ b/Chips/Hisilicon/Library/I2CLib/I2CHw.h @@ -26,6 +26,7 @@ #define I2C_TXRX_THRESHOLD 0x7 #define I2C_SS_SCLHCNT 0x493 #define I2C_SS_SCLLCNT 0x4fe +#define I2C_CMD_STOP_BIT BIT9 #define I2C_REG_WRITE(reg,data) \ MmioWrite32 ((reg), (data)) diff --git a/Chips/Hisilicon/Library/I2CLib/I2CLib.c b/Chips/Hisilicon/Library/I2CLib/I2CLib.c index 087a4ba..b5b388d 100644 --- a/Chips/Hisilicon/Library/I2CLib/I2CLib.c +++ b/Chips/Hisilicon/Library/I2CLib/I2CLib.c @@ -360,7 +360,12 @@ I2CWrite(I2C_DEVICE *I2cInfo, UINT16 InfoOffset, UINT32 ulLength, UINT8 *pBuf) ulFifo = I2C_GetTxStatus(I2cInfo->Socket,I2cInfo->Port); }
I2C_REG_WRITE(Base + I2C_DATA_CMD_OFFSET, *pBuf++);
if (Idx < ulLength - 1) {I2C_REG_WRITE(Base + I2C_DATA_CMD_OFFSET, (*pBuf++));} else {//Send command stop bit for the last transferI2C_REG_WRITE(Base + I2C_DATA_CMD_OFFSET, (*pBuf++) | I2C_CMD_STOP_BIT);}ulFifo = I2C_GetTxStatus(I2cInfo->Socket,I2cInfo->Port); @@ -386,13 +391,10 @@ EFI_STATUS EFIAPI I2CRead(I2C_DEVICE *I2cInfo, UINT16 InfoOffset,UINT32 ulRxLen,UINT8 *pBuf) {
- UINT32 ulCnt;
- UINT16 usTotalLen = 0; UINT32 ulFifo; UINT32 ulTimes = 0; UINT8 I2CWAddr[2]; EFI_STATUS Status;
- UINT32 BytesLeft; UINT32 Idx = 0; UINTN Base;
@@ -441,42 +443,14 @@ I2CRead(I2C_DEVICE *I2cInfo, UINT16 InfoOffset,UINT32 ulRxLen,UINT8 *pBuf) ulFifo = I2C_GetTxStatus(I2cInfo->Socket,I2cInfo->Port); }
- usTotalLen = ulRxLen;
- BytesLeft = usTotalLen;
- while(BytesLeft >= I2C_DRV_ONCE_READ_BYTES_NUM){
for(ulCnt = 0; ulCnt < I2C_DRV_ONCE_READ_BYTES_NUM; ulCnt++) {
- while (ulRxLen > 0) {
if (ulRxLen > 1) { I2C_REG_WRITE(Base + I2C_DATA_CMD_OFFSET, I2C_READ_SIGNAL);} else {//Send command stop bit for the last transferI2C_REG_WRITE(Base + I2C_DATA_CMD_OFFSET, I2C_READ_SIGNAL | I2C_CMD_STOP_BIT); }
for(ulCnt = 0; ulCnt < I2C_DRV_ONCE_READ_BYTES_NUM; ulCnt++) {ulTimes = 0;do {I2C_Delay(2);while(++ulTimes > I2C_READ_TIMEOUT) {(VOID)I2C_Disable(I2cInfo->Socket, I2cInfo->Port);return EFI_TIMEOUT;}ulFifo = I2C_GetRxStatus(I2cInfo->Socket,I2cInfo->Port);}while(0 == ulFifo);I2C_REG_READ(Base + I2C_DATA_CMD_OFFSET, pBuf[Idx++]);}BytesLeft -= I2C_DRV_ONCE_READ_BYTES_NUM;- }
- for(ulCnt = 0; ulCnt < BytesLeft; ulCnt++) {
I2C_REG_WRITE(Base + I2C_DATA_CMD_OFFSET, I2C_READ_SIGNAL);- }
- for(ulCnt = 0; ulCnt < BytesLeft; ulCnt++) { ulTimes = 0; do { I2C_Delay(2);
@@ -489,6 +463,8 @@ I2CRead(I2C_DEVICE *I2cInfo, UINT16 InfoOffset,UINT32 ulRxLen,UINT8 *pBuf) }while(0 == ulFifo); I2C_REG_READ(Base + I2C_DATA_CMD_OFFSET, pBuf[Idx++]);
ulRxLen --;1.9.1