As new M7(Cortex-M7) firmware support self-adapte, so do not need BIOS to implement some function, remove useless funtions and report CPU0/CPU1 Nic NCL offset to M7.
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Ming Huang ming.huang@linaro.org --- Platform/Hisilicon/D06/Library/OemNicLib/OemNicLib.c | 272 ++++---------------- 1 file changed, 45 insertions(+), 227 deletions(-)
diff --git a/Platform/Hisilicon/D06/Library/OemNicLib/OemNicLib.c b/Platform/Hisilicon/D06/Library/OemNicLib/OemNicLib.c index aaf990216982..9bf274e1b991 100644 --- a/Platform/Hisilicon/D06/Library/OemNicLib/OemNicLib.c +++ b/Platform/Hisilicon/D06/Library/OemNicLib/OemNicLib.c @@ -21,44 +21,21 @@ #include <Library/OemNicLib.h>
#define CPU2_SFP2_100G_CARD_OFFSET 0x25 -#define CPU1_SFP1_LOCATE_OFFSET 0x16 -#define CPU1_SFP0_LOCATE_OFFSET 0x12 -#define CPU2_SFP1_LOCATE_OFFSET 0x21 -#define CPU2_SFP0_LOCATE_OFFSET 0x19 -#define CPU2_SFP2_10G_GE_CARD_OFFSET 0x25
-#define SFP_10G_SPEED 10 -#define SFP_25G_SPEED 25 -#define SFP_100G_SPEED 100 -#define SFP_GE_SPEED 1 - -#define SFP_GE_SPEED_VAL_VENDOR_FINISAR 0x0C -#define SFP_GE_SPEED_VAL 0x0D -#define SFP_10G_SPEED_VAL 0x67 -#define SFP_25G_SPEED_VAL 0xFF +#define SOCKET1_NET_PORT_100G 1 +#define SOCKET0_NET_PORT_NUM 4 +#define SOCKET1_NET_PORT_NUM 2
#define CARD_PRESENT_100G (BIT7) -#define CARD_PRESENT_10G (BIT0) -#define SELECT_SFP_BY_INDEX(index) (1 << (index - 1)) -#define SPF_SPEED_OFFSET 12 - -#define SFP_DEVICE_ADDRESS 0x50 -#define CPU1_9545_I2C_ADDR 0x70 -#define CPU2_9545_I2C_ADDR 0x71 - -#define FIBER_PRESENT 0 -#define CARD_PRESENT 1 -#define I2C_PORT_SFP 4 -#define CPU2_I2C_PORT_SFP 5 - -#define SOCKET_0 0 -#define SOCKET_1 1 #define EEPROM_I2C_PORT 4 #define EEPROM_PAGE_SIZE 0x40 #define MAC_ADDR_LEN 6 #define I2C_OFFSET_EEPROM_ETH0 (0xc00) #define I2C_SLAVEADDR_EEPROM (0x52)
+#define SRAM_NIC_NCL1_OFFSET_FLAG 0xA0E87FE0 +#define SRAM_NIC_NCL2_OFFSET_FLAG 0xA0E87FE4 + #pragma pack(1) typedef struct { UINT16 Crc16; @@ -114,204 +91,6 @@ UINT16 CrcTable16[256] = { 0x6E17, 0x7E36, 0x4E55, 0x5E74, 0x2E93, 0x3EB2, 0x0ED1, 0x1EF0, };
-EFI_STATUS -GetSfpSpeed ( - UINT16 Socket, - UINT16 SfpNum, - UINT8* FiberSpeed - ) -{ - EFI_STATUS Status; - I2C_DEVICE SpdDev; - UINT8 SfpSelect; - UINT8 SfpSpeed; - UINT32 RegAddr; - UINT16 I2cAddr; - UINT32 SfpPort; - - SfpSpeed = 0x0; - if (Socket == SOCKET_1) { - I2cAddr = CPU2_9545_I2C_ADDR; - SfpPort = CPU2_I2C_PORT_SFP; - } else { - I2cAddr = CPU1_9545_I2C_ADDR; - SfpPort = I2C_PORT_SFP; - } - - Status = I2CInit (Socket, SfpPort, Normal); - if (EFI_ERROR (Status)) { - DEBUG ((DEBUG_ERROR, "[%a]:[%dL] Socket%d Call I2CInit failed! p1=0x%x.\n", - __FUNCTION__, __LINE__, Socket, Status)); - return Status; - } - - SpdDev.Socket = Socket; - SpdDev.DeviceType = DEVICE_TYPE_SPD; - SpdDev.Port = SfpPort; - SpdDev.SlaveDeviceAddress = I2cAddr; - RegAddr = 0x0; - SfpSelect = SELECT_SFP_BY_INDEX (SfpNum); - - Status = I2CWrite (&SpdDev, RegAddr, 1, &SfpSelect); - if (EFI_ERROR (Status)) { - DEBUG ((DEBUG_ERROR, "I2CWrite Error =%r.\n", Status)); - return Status; - } - - SpdDev.Socket = Socket; - SpdDev.DeviceType = DEVICE_TYPE_SPD; - SpdDev.Port = SfpPort; - SpdDev.SlaveDeviceAddress = SFP_DEVICE_ADDRESS; - - RegAddr = SPF_SPEED_OFFSET; - Status = I2CRead (&SpdDev, RegAddr, 1, &SfpSpeed); - if (EFI_ERROR (Status)) { - DEBUG ((DEBUG_ERROR, "I2CRead Error =%r.\n", Status)); - return Status; - } - - DEBUG ((DEBUG_INFO, "BR, Nominal, Nominal signalling rate, SfpSpeed: 0x%x\n", - SfpSpeed)); - - if (SfpSpeed == SFP_10G_SPEED_VAL) { - *FiberSpeed = SFP_10G_SPEED; - } else if (SfpSpeed == SFP_25G_SPEED_VAL) { - *FiberSpeed = SFP_25G_SPEED; - } else if ((SfpSpeed == SFP_GE_SPEED_VAL) || - (SfpSpeed == SFP_GE_SPEED_VAL_VENDOR_FINISAR)) { - *FiberSpeed = SFP_GE_SPEED; - } - - return EFI_SUCCESS; -} - -//Fiber1Type/Fiber2Type/Fiber3Type return: SFP_10G_SPEED, SFP_100G_SPEED, SFP_GE_SPEED -UINT32 -GetCpu2FiberType ( - UINT8* Fiber1Type, - UINT8* Fiber2Type, - UINT8* Fiber100Ge - ) -{ - EFI_STATUS Status; - UINT16 SfpNum1; - UINT8 SfpSpeed1; - UINT16 SfpNum2; - UINT8 SfpSpeed2; - - SfpNum1 = 0x1; - SfpSpeed1 = SFP_10G_SPEED; - SfpNum2 = 0x2; - SfpSpeed2 = SFP_10G_SPEED; - *Fiber100Ge = 0x0; - *Fiber1Type = SFP_10G_SPEED; - *Fiber2Type = SFP_10G_SPEED; - - if ((ReadCpldReg (CPU2_SFP2_100G_CARD_OFFSET) & CARD_PRESENT_100G) != 0) { - // 100 Ge card - *Fiber1Type = SFP_10G_SPEED; - *Fiber2Type = SFP_10G_SPEED; - *Fiber100Ge = SFP_100G_SPEED; - DEBUG ((DEBUG_ERROR,"Detect Fiber SFP_100G is Present, Set 100Ge\n")); - } else if ((ReadCpldReg (CPU2_SFP2_10G_GE_CARD_OFFSET) & CARD_PRESENT_10G) != 0) { - *Fiber100Ge = 0x0; - *Fiber1Type = SFP_10G_SPEED; - *Fiber2Type = SFP_10G_SPEED; - if (ReadCpldReg (CPU2_SFP0_LOCATE_OFFSET) == FIBER_PRESENT) { - // Fiber detected in CPU2 slot0, read speed via i2c - Status = GetSfpSpeed (SOCKET_1, SfpNum1, &SfpSpeed1); - if (EFI_ERROR (Status)) { - DEBUG((DEBUG_ERROR, - "Get Socket1 Sfp%d Speed Error: %r.\n", - SfpNum1, - Status)); - return Status; - } - if (SfpSpeed1 == SFP_25G_SPEED) { - // P1 don't support 25G, so set speed to 10G - *Fiber1Type = SFP_10G_SPEED; - } else { - *Fiber1Type = SfpSpeed1; - } - } else { - // No fiber, set speed to 10G - *Fiber1Type = SFP_10G_SPEED; - } - - if (ReadCpldReg (CPU2_SFP1_LOCATE_OFFSET) == FIBER_PRESENT) { - // Fiber detected in CPU2 slot1, read speed via i2c - Status = GetSfpSpeed (SOCKET_1, SfpNum2, &SfpSpeed2); - if (EFI_ERROR (Status)) { - DEBUG ((DEBUG_ERROR, "Get Sfp%d Speed Error: %r.\n", SfpNum2, Status)); - return Status; - } - if (SfpSpeed2 == SFP_25G_SPEED) { - *Fiber2Type = SFP_10G_SPEED; - } else { - *Fiber2Type = SfpSpeed2; - } - } else { - // No fiber, set speed to 10G - *Fiber2Type = SFP_10G_SPEED; - } - } else { - // 100Ge/10Ge/Ge Fiber is not found. - *Fiber1Type = SFP_10G_SPEED; - *Fiber2Type = SFP_10G_SPEED; - *Fiber100Ge = 0x0; - } - - return EFI_SUCCESS; -} - -//Fiber1Type/Fiber2Type return: SFP_10G_SPEED, SFP_25G_SPEED, SFP_GE_SPEED -UINT32 -GetCpu1FiberType ( - UINT8* Fiber1Type, - UINT8* Fiber2Type - ) -{ - EFI_STATUS Status; - UINT16 SfpNum1; - UINT8 SfpSpeed1; - UINT16 SfpNum2; - UINT8 SfpSpeed2; - - SfpNum1 = 0x1; - SfpSpeed1 = SFP_10G_SPEED; - SfpNum2 = 0x2; - SfpSpeed2 = SFP_10G_SPEED; - *Fiber1Type = SFP_10G_SPEED; - *Fiber2Type = SFP_10G_SPEED; - // Fiber detected in CPU1 slot0, read speed via i2c - if (ReadCpldReg (CPU1_SFP0_LOCATE_OFFSET) == FIBER_PRESENT) { - Status = GetSfpSpeed (SOCKET_0, SfpNum1, &SfpSpeed1); - if (EFI_ERROR (Status)) { - DEBUG ((DEBUG_ERROR, "Get Socket0 Sfp%d Speed Error: %r.\n", - SfpNum1, Status)); - return Status; - } - *Fiber1Type = SfpSpeed1; - } else { - *Fiber1Type = SFP_10G_SPEED; - } - - // Fiber detected in CPU1 slot1, read speed via i2c - if (ReadCpldReg (CPU1_SFP1_LOCATE_OFFSET) == FIBER_PRESENT) { - Status = GetSfpSpeed (SOCKET_0, SfpNum2, &SfpSpeed2); - if (EFI_ERROR (Status)) { - *Fiber2Type = SFP_10G_SPEED; - DEBUG ((DEBUG_ERROR, "Get Sfp%d Speed Error: %r.\n", SfpNum2, Status)); - return Status; - } - *Fiber2Type = SfpSpeed2; - } else { - *Fiber2Type = SFP_10G_SPEED; - } - - return EFI_SUCCESS; -} - UINT16 MakeCrcCheckSum ( UINT8 *Buffer, UINT32 Length @@ -567,3 +346,42 @@ OemIsInitEth ( { return TRUE; } + +EFI_STATUS ConfigCDR(UINT32 Socket) +{ + return EFI_SUCCESS; +} + +UINT32 OemGetNclConfOffset (UINT32 Socket) +{ + UINT32 Cpu1NclConfOffet = 0; + UINT32 Cpu2NclConfOffet = 0; + + if (0 == Socket) { + MmioWrite32 (SRAM_NIC_NCL1_OFFSET_FLAG, Cpu1NclConfOffet); + return Cpu1NclConfOffet; + } else { + //2P only + // P1 + if ((ReadCpldReg (CPU2_SFP2_100G_CARD_OFFSET) & CARD_PRESENT_100G) != 0) { + Cpu2NclConfOffet = 0x20000; + } else { + Cpu2NclConfOffet = 0x10000; + } + MmioWrite32 (SRAM_NIC_NCL2_OFFSET_FLAG, Cpu2NclConfOffet); + return Cpu2NclConfOffet; + } +} + +UINT32 OemGetNetPortNum (UINT32 Socket) +{ + if (0 == Socket){ + return SOCKET0_NET_PORT_NUM; + } + + if ((ReadCpldReg (CPU2_SFP2_100G_CARD_OFFSET) & CARD_PRESENT_100G) != 0) { + return SOCKET1_NET_PORT_100G; + } else { + return SOCKET1_NET_PORT_NUM; + } +}