[Linaro-uefi] [PATCH v2 2/5] Drivers/SdMmc: Import SdMmcPciHcDxe driver

18 Nov 2016

From: Jan Dąbroś jsd@semihalf.com
Import SdMmcPciHcDxe.c from tianocore/edk2 tree at revision
a5991c8832c5: "IntelSiliconPkg: Add PCD for Graphics VBT FFS GUID" and
rename it as MvSdMmcPciHcDxe.c
Because Marvell Xenon SD/MMC controller isn't fully compatible with
SDHCI specification, it demands some quirks on generic driver during
initialization and command processing. In order to achieve that,
MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdMmcPciHcDxe.c is imported and
adjusted correctly in following commit. Also in next patch's commit
message necessary changes to generic driver are listed.
Xenon SD/MMC controller is present on Marvell Armada70x0 SoCs.
EFI_D_INFO, EFI_D_VERBOSE, EFI_D_WARN and EFI_D_ERROR are replaced
with currently recommended values.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jan Dabros jsd@semihalf.com
Signed-off-by: Marcin Wojtas mw@semihalf.com
---
 Drivers/SdMmc/Xenon/MvComponentName.c        |  211 +++
 Drivers/SdMmc/Xenon/MvEmmcDevice.c           | 1162 ++++++++++++++++
 Drivers/SdMmc/Xenon/MvSdDevice.c             | 1190 ++++++++++++++++
 Drivers/SdMmc/Xenon/MvSdMmcPciHcDxe.c        | 1316 ++++++++++++++++++
 Drivers/SdMmc/Xenon/MvSdMmcPciHcDxe.h        |  785 +++++++++++
 Drivers/SdMmc/Xenon/MvSdMmcPciHcDxe.inf      |   72 +
 Drivers/SdMmc/Xenon/MvSdMmcPciHcDxe.uni      |   23 +
 Drivers/SdMmc/Xenon/MvSdMmcPciHcDxeExtra.uni |   19 +
 Drivers/SdMmc/Xenon/MvSdMmcPciHci.c          | 1923 ++++++++++++++++++++++++++
 Drivers/SdMmc/Xenon/MvSdMmcPciHci.h          |  546 ++++++++
 10 files changed, 7247 insertions(+)
 create mode 100644 Drivers/SdMmc/Xenon/MvComponentName.c
 create mode 100755 Drivers/SdMmc/Xenon/MvEmmcDevice.c
 create mode 100644 Drivers/SdMmc/Xenon/MvSdDevice.c
 create mode 100644 Drivers/SdMmc/Xenon/MvSdMmcPciHcDxe.c
 create mode 100644 Drivers/SdMmc/Xenon/MvSdMmcPciHcDxe.h
 create mode 100644 Drivers/SdMmc/Xenon/MvSdMmcPciHcDxe.inf
 create mode 100644 Drivers/SdMmc/Xenon/MvSdMmcPciHcDxe.uni
 create mode 100644 Drivers/SdMmc/Xenon/MvSdMmcPciHcDxeExtra.uni
 create mode 100644 Drivers/SdMmc/Xenon/MvSdMmcPciHci.c
 create mode 100644 Drivers/SdMmc/Xenon/MvSdMmcPciHci.h

diff --git a/Drivers/SdMmc/Xenon/MvComponentName.c b/Drivers/SdMmc/Xenon/MvComponentName.c
new file mode 100644
index 0000000..3329929
--- /dev/null
+++ b/Drivers/SdMmc/Xenon/MvComponentName.c
@@ -0,0 +1,211 @@
+/** @file
+  UEFI Component Name(2) protocol implementation for SD/MMC host controller driver.
+
+  Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
+  This program and the accompanying materials
+  are licensed and made available under the terms and conditions of the BSD License
+  which accompanies this distribution.  The full text of the license may be found at
+  http://opensource.org/licenses/bsd-license.php
+
+  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "SdMmcPciHcDxe.h"
+
+//
+// EFI Component Name Protocol
+//
+GLOBAL_REMOVE_IF_UNREFERENCED EFI_COMPONENT_NAME_PROTOCOL gSdMmcPciHcComponentName = {
+  SdMmcPciHcComponentNameGetDriverName,
+  SdMmcPciHcComponentNameGetControllerName,
+  "eng"
+};
+
+//
+// EFI Component Name 2 Protocol
+//
+GLOBAL_REMOVE_IF_UNREFERENCED EFI_COMPONENT_NAME2_PROTOCOL gSdMmcPciHcComponentName2 = {
+  (EFI_COMPONENT_NAME2_GET_DRIVER_NAME)     SdMmcPciHcComponentNameGetDriverName,
+  (EFI_COMPONENT_NAME2_GET_CONTROLLER_NAME) SdMmcPciHcComponentNameGetControllerName,
+  "en"
+};
+
+GLOBAL_REMOVE_IF_UNREFERENCED EFI_UNICODE_STRING_TABLE mSdMmcPciHcDriverNameTable[] = {
+  { "eng;en", L"Edkii Sd/Mmc Host Controller Driver" },
+  { NULL , NULL }
+};
+
+GLOBAL_REMOVE_IF_UNREFERENCED EFI_UNICODE_STRING_TABLE mSdMmcPciHcControllerNameTable[] = {
+  { "eng;en", L"Edkii Sd/Mmc Host Controller" },
+  { NULL , NULL }
+};
+
+/**
+  Retrieves a Unicode string that is the user readable name of the driver.
+
+  This function retrieves the user readable name of a driver in the form of a
+  Unicode string. If the driver specified by This has a user readable name in
+  the language specified by Language, then a pointer to the driver name is
+  returned in DriverName, and EFI_SUCCESS is returned. If the driver specified
+  by This does not support the language specified by Language,
+  then EFI_UNSUPPORTED is returned.
+
+  @param  This[in]              A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
+                                EFI_COMPONENT_NAME_PROTOCOL instance.
+
+  @param  Language[in]          A pointer to a Null-terminated ASCII string
+                                array indicating the language. This is the
+                                language of the driver name that the caller is
+                                requesting, and it must match one of the
+                                languages specified in SupportedLanguages. The
+                                number of languages supported by a driver is up
+                                to the driver writer. Language is specified
+                                in RFC 4646 or ISO 639-2 language code format.
+
+  @param  DriverName[out]       A pointer to the Unicode string to return.
+                                This Unicode string is the name of the
+                                driver specified by This in the language
+                                specified by Language.
+
+  @retval EFI_SUCCESS           The Unicode string for the Driver specified by
+                                This and the language specified by Language was
+                                returned in DriverName.
+
+  @retval EFI_INVALID_PARAMETER Language is NULL.
+
+  @retval EFI_INVALID_PARAMETER DriverName is NULL.
+
+  @retval EFI_UNSUPPORTED       The driver specified by This does not support
+                                the language specified by Language.
+
+**/
+EFI_STATUS
+EFIAPI
+SdMmcPciHcComponentNameGetDriverName (
+  IN  EFI_COMPONENT_NAME_PROTOCOL     *This,
+  IN  CHAR8                           *Language,
+  OUT CHAR16                          **DriverName
+  )
+{
+  return LookupUnicodeString2 (
+           Language,
+           This->SupportedLanguages,
+           mSdMmcPciHcDriverNameTable,
+           DriverName,
+           (BOOLEAN)(This == &gSdMmcPciHcComponentName)
+           );
+}
+
+/**
+  Retrieves a Unicode string that is the user readable name of the controller
+  that is being managed by a driver.
+
+  This function retrieves the user readable name of the controller specified by
+  ControllerHandle and ChildHandle in the form of a Unicode string. If the
+  driver specified by This has a user readable name in the language specified by
+  Language, then a pointer to the controller name is returned in ControllerName,
+  and EFI_SUCCESS is returned.  If the driver specified by This is not currently
+  managing the controller specified by ControllerHandle and ChildHandle,
+  then EFI_UNSUPPORTED is returned.  If the driver specified by This does not
+  support the language specified by Language, then EFI_UNSUPPORTED is returned.
+
+  @param  This[in]              A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
+                                EFI_COMPONENT_NAME_PROTOCOL instance.
+
+  @param  ControllerHandle[in]  The handle of a controller that the driver
+                                specified by This is managing.  This handle
+                                specifies the controller whose name is to be
+                                returned.
+
+  @param  ChildHandle[in]       The handle of the child controller to retrieve
+                                the name of.  This is an optional parameter that
+                                may be NULL.  It will be NULL for device
+                                drivers.  It will also be NULL for a bus drivers
+                                that wish to retrieve the name of the bus
+                                controller.  It will not be NULL for a bus
+                                driver that wishes to retrieve the name of a
+                                child controller.
+
+  @param  Language[in]          A pointer to a Null-terminated ASCII string
+                                array indicating the language.  This is the
+                                language of the driver name that the caller is
+                                requesting, and it must match one of the
+                                languages specified in SupportedLanguages. The
+                                number of languages supported by a driver is up
+                                to the driver writer. Language is specified in
+                                RFC 4646 or ISO 639-2 language code format.
+
+  @param  ControllerName[out]   A pointer to the Unicode string to return.
+                                This Unicode string is the name of the
+                                controller specified by ControllerHandle and
+                                ChildHandle in the language specified by
+                                Language from the point of view of the driver
+                                specified by This.
+
+  @retval EFI_SUCCESS           The Unicode string for the user readable name in
+                                the language specified by Language for the
+                                driver specified by This was returned in
+                                DriverName.
+
+  @retval EFI_INVALID_PARAMETER ControllerHandle is not a valid EFI_HANDLE.
+
+  @retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid
+                                EFI_HANDLE.
+
+  @retval EFI_INVALID_PARAMETER Language is NULL.
+
+  @retval EFI_INVALID_PARAMETER ControllerName is NULL.
+
+  @retval EFI_UNSUPPORTED       The driver specified by This is not currently
+                                managing the controller specified by
+                                ControllerHandle and ChildHandle.
+
+  @retval EFI_UNSUPPORTED       The driver specified by This does not support
+                                the language specified by Language.
+
+**/
+EFI_STATUS
+EFIAPI
+SdMmcPciHcComponentNameGetControllerName (
+  IN  EFI_COMPONENT_NAME_PROTOCOL     *This,
+  IN  EFI_HANDLE                      ControllerHandle,
+  IN  EFI_HANDLE                      ChildHandle, OPTIONAL
+  IN  CHAR8                           *Language,
+  OUT CHAR16                          **ControllerName
+  )
+{
+  EFI_STATUS         Status;
+
+  if (Language == NULL || ControllerName == NULL) {
+    return EFI_INVALID_PARAMETER;
+  }
+
+  //
+  // This is a device driver, so ChildHandle must be NULL.
+  //
+  if (ChildHandle != NULL) {
+    return EFI_UNSUPPORTED;
+  }
+
+  //
+  // Make sure this driver is currently managing ControllerHandle
+  //
+  Status = EfiTestManagedDevice (
+             ControllerHandle,
+             gSdMmcPciHcDriverBinding.DriverBindingHandle,
+             &gEfiPciIoProtocolGuid
+             );
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+
+  return LookupUnicodeString2 (
+           Language,
+           This->SupportedLanguages,
+           mSdMmcPciHcControllerNameTable,
+           ControllerName,
+           (BOOLEAN)(This == &gSdMmcPciHcComponentName)
+           );
+}
diff --git a/Drivers/SdMmc/Xenon/MvEmmcDevice.c b/Drivers/SdMmc/Xenon/MvEmmcDevice.c
new file mode 100755
index 0000000..3f73194
--- /dev/null
+++ b/Drivers/SdMmc/Xenon/MvEmmcDevice.c
@@ -0,0 +1,1162 @@
+/** @file
+  This file provides some helper functions which are specific for EMMC device.
+
+  Copyright (c) 2015 - 2016, Intel Corporation. All rights reserved.<BR>
+  This program and the accompanying materials
+  are licensed and made available under the terms and conditions of the BSD License
+  which accompanies this distribution.  The full text of the license may be found at
+  http://opensource.org/licenses/bsd-license.php
+
+  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "SdMmcPciHcDxe.h"
+
+/**
+  Send command GO_IDLE_STATE (CMD0 with argument of 0x00000000) to the device to
+  make it go to Idle State.
+
+  Refer to EMMC Electrical Standard Spec 5.1 Section 6.4 for details.
+
+  @param[in] PassThru       A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+  @param[in] Slot           The slot number of the SD card to send the command to.
+
+  @retval EFI_SUCCESS       The EMMC device is reset correctly.
+  @retval Others            The device reset fails.
+
+**/
+EFI_STATUS
+EmmcReset (
+  IN EFI_SD_MMC_PASS_THRU_PROTOCOL      *PassThru,
+  IN UINT8                              Slot
+  )
+{
+  EFI_SD_MMC_COMMAND_BLOCK              SdMmcCmdBlk;
+  EFI_SD_MMC_STATUS_BLOCK               SdMmcStatusBlk;
+  EFI_SD_MMC_PASS_THRU_COMMAND_PACKET   Packet;
+  EFI_STATUS                            Status;
+
+  ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
+  ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
+  ZeroMem (&Packet, sizeof (Packet));
+
+  Packet.SdMmcCmdBlk    = &SdMmcCmdBlk;
+  Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
+  Packet.Timeout        = SD_MMC_HC_GENERIC_TIMEOUT;
+
+  SdMmcCmdBlk.CommandIndex = EMMC_GO_IDLE_STATE;
+  SdMmcCmdBlk.CommandType  = SdMmcCommandTypeBc;
+  SdMmcCmdBlk.ResponseType = 0;
+  SdMmcCmdBlk.CommandArgument = 0;
+
+  gBS->Stall (1000);
+
+  Status = SdMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
+
+  return Status;
+}
+
+/**
+  Send command SEND_OP_COND to the EMMC device to get the data of the OCR register.
+
+  Refer to EMMC Electrical Standard Spec 5.1 Section 6.4 for details.
+
+  @param[in]      PassThru  A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+  @param[in]      Slot      The slot number of the SD card to send the command to.
+  @param[in, out] Argument  On input, the argument of SEND_OP_COND is to send to the device.
+                            On output, the argument is the value of OCR register.
+
+  @retval EFI_SUCCESS       The operation is done correctly.
+  @retval Others            The operation fails.
+
+**/
+EFI_STATUS
+EmmcGetOcr (
+  IN     EFI_SD_MMC_PASS_THRU_PROTOCOL  *PassThru,
+  IN     UINT8                          Slot,
+  IN OUT UINT32                         *Argument
+  )
+{
+  EFI_SD_MMC_COMMAND_BLOCK              SdMmcCmdBlk;
+  EFI_SD_MMC_STATUS_BLOCK               SdMmcStatusBlk;
+  EFI_SD_MMC_PASS_THRU_COMMAND_PACKET   Packet;
+  EFI_STATUS                            Status;
+
+  ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
+  ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
+  ZeroMem (&Packet, sizeof (Packet));
+
+  Packet.SdMmcCmdBlk    = &SdMmcCmdBlk;
+  Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
+  Packet.Timeout        = SD_MMC_HC_GENERIC_TIMEOUT;
+
+  SdMmcCmdBlk.CommandIndex = EMMC_SEND_OP_COND;
+  SdMmcCmdBlk.CommandType  = SdMmcCommandTypeBcr;
+  SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR3;
+  SdMmcCmdBlk.CommandArgument = *Argument;
+
+  Status = SdMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
+  if (!EFI_ERROR (Status)) {
+    //
+    // For details, refer to SD Host Controller Simplified Spec 3.0 Table 2-12.
+    //
+    *Argument = SdMmcStatusBlk.Resp0;
+  }
+
+  return Status;
+}
+
+/**
+  Broadcast command ALL_SEND_CID to the bus to ask all the EMMC devices to send the
+  data of their CID registers.
+
+  Refer to EMMC Electrical Standard Spec 5.1 Section 6.4 for details.
+
+  @param[in] PassThru       A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+  @param[in] Slot           The slot number of the SD card to send the command to.
+
+  @retval EFI_SUCCESS       The operation is done correctly.
+  @retval Others            The operation fails.
+
+**/
+EFI_STATUS
+EmmcGetAllCid (
+  IN EFI_SD_MMC_PASS_THRU_PROTOCOL      *PassThru,
+  IN UINT8                              Slot
+  )
+{
+  EFI_SD_MMC_COMMAND_BLOCK              SdMmcCmdBlk;
+  EFI_SD_MMC_STATUS_BLOCK               SdMmcStatusBlk;
+  EFI_SD_MMC_PASS_THRU_COMMAND_PACKET   Packet;
+  EFI_STATUS                            Status;
+
+  ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
+  ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
+  ZeroMem (&Packet, sizeof (Packet));
+
+  Packet.SdMmcCmdBlk    = &SdMmcCmdBlk;
+  Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
+  Packet.Timeout        = SD_MMC_HC_GENERIC_TIMEOUT;
+
+  SdMmcCmdBlk.CommandIndex = EMMC_ALL_SEND_CID;
+  SdMmcCmdBlk.CommandType  = SdMmcCommandTypeBcr;
+  SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR2;
+  SdMmcCmdBlk.CommandArgument = 0;
+
+  Status = SdMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
+
+  return Status;
+}
+
+/**
+  Send command SET_RELATIVE_ADDR to the EMMC device to assign a Relative device
+  Address (RCA).
+
+  Refer to EMMC Electrical Standard Spec 5.1 Section 6.4 for details.
+
+  @param[in] PassThru       A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+  @param[in] Slot           The slot number of the SD card to send the command to.
+  @param[in] Rca            The relative device address to be assigned.
+
+  @retval EFI_SUCCESS       The operation is done correctly.
+  @retval Others            The operation fails.
+
+**/
+EFI_STATUS
+EmmcSetRca (
+  IN EFI_SD_MMC_PASS_THRU_PROTOCOL      *PassThru,
+  IN UINT8                              Slot,
+  IN UINT16                             Rca
+  )
+{
+  EFI_SD_MMC_COMMAND_BLOCK              SdMmcCmdBlk;
+  EFI_SD_MMC_STATUS_BLOCK               SdMmcStatusBlk;
+  EFI_SD_MMC_PASS_THRU_COMMAND_PACKET   Packet;
+  EFI_STATUS                            Status;
+
+  ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
+  ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
+  ZeroMem (&Packet, sizeof (Packet));
+
+  Packet.SdMmcCmdBlk    = &SdMmcCmdBlk;
+  Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
+  Packet.Timeout        = SD_MMC_HC_GENERIC_TIMEOUT;
+
+  SdMmcCmdBlk.CommandIndex = EMMC_SET_RELATIVE_ADDR;
+  SdMmcCmdBlk.CommandType  = SdMmcCommandTypeAc;
+  SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR1;
+  SdMmcCmdBlk.CommandArgument = (UINT32)Rca << 16;
+
+  Status = SdMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
+
+  return Status;
+}
+
+/**
+  Send command SEND_CSD to the EMMC device to get the data of the CSD register.
+
+  Refer to EMMC Electrical Standard Spec 5.1 Section 6.10.4 for details.
+
+  @param[in]  PassThru      A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+  @param[in]  Slot          The slot number of the SD card to send the command to.
+  @param[in]  Rca           The relative device address of selected device.
+  @param[out] Csd           The buffer to store the content of the CSD register.
+                            Note the caller should ignore the lowest byte of this
+                            buffer as the content of this byte is meaningless even
+                            if the operation succeeds.
+
+  @retval EFI_SUCCESS       The operation is done correctly.
+  @retval Others            The operation fails.
+
+**/
+EFI_STATUS
+EmmcGetCsd (
+  IN     EFI_SD_MMC_PASS_THRU_PROTOCOL  *PassThru,
+  IN     UINT8                          Slot,
+  IN     UINT16                         Rca,
+     OUT EMMC_CSD                       *Csd
+  )
+{
+  EFI_SD_MMC_COMMAND_BLOCK              SdMmcCmdBlk;
+  EFI_SD_MMC_STATUS_BLOCK               SdMmcStatusBlk;
+  EFI_SD_MMC_PASS_THRU_COMMAND_PACKET   Packet;
+  EFI_STATUS                            Status;
+
+  ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
+  ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
+  ZeroMem (&Packet, sizeof (Packet));
+
+  Packet.SdMmcCmdBlk    = &SdMmcCmdBlk;
+  Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
+  Packet.Timeout        = SD_MMC_HC_GENERIC_TIMEOUT;
+
+  SdMmcCmdBlk.CommandIndex = EMMC_SEND_CSD;
+  SdMmcCmdBlk.CommandType  = SdMmcCommandTypeAc;
+  SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR2;
+  SdMmcCmdBlk.CommandArgument = (UINT32)Rca << 16;
+
+  Status = SdMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
+  if (!EFI_ERROR (Status)) {
+    //
+    // For details, refer to SD Host Controller Simplified Spec 3.0 Table 2-12.
+    //
+    CopyMem (((UINT8*)Csd) + 1, &SdMmcStatusBlk.Resp0, sizeof (EMMC_CSD) - 1);
+  }
+
+  return Status;
+}
+
+/**
+  Send command SELECT_DESELECT_CARD to the EMMC device to select/deselect it.
+
+  Refer to EMMC Electrical Standard Spec 5.1 Section 6.10.4 for details.
+
+  @param[in]  PassThru      A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+  @param[in]  Slot          The slot number of the SD card to send the command to.
+  @param[in]  Rca           The relative device address of selected device.
+
+  @retval EFI_SUCCESS       The operation is done correctly.
+  @retval Others            The operation fails.
+
+**/
+EFI_STATUS
+EmmcSelect (
+  IN EFI_SD_MMC_PASS_THRU_PROTOCOL      *PassThru,
+  IN UINT8                              Slot,
+  IN UINT16                             Rca
+  )
+{
+  EFI_SD_MMC_COMMAND_BLOCK              SdMmcCmdBlk;
+  EFI_SD_MMC_STATUS_BLOCK               SdMmcStatusBlk;
+  EFI_SD_MMC_PASS_THRU_COMMAND_PACKET   Packet;
+  EFI_STATUS                            Status;
+
+  ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
+  ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
+  ZeroMem (&Packet, sizeof (Packet));
+
+  Packet.SdMmcCmdBlk    = &SdMmcCmdBlk;
+  Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
+  Packet.Timeout        = SD_MMC_HC_GENERIC_TIMEOUT;
+
+  SdMmcCmdBlk.CommandIndex = EMMC_SELECT_DESELECT_CARD;
+  SdMmcCmdBlk.CommandType  = SdMmcCommandTypeAc;
+  SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR1;
+  SdMmcCmdBlk.CommandArgument = (UINT32)Rca << 16;
+
+  Status = SdMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
+
+  return Status;
+}
+
+/**
+  Send command SEND_EXT_CSD to the EMMC device to get the data of the EXT_CSD register.
+
+  Refer to EMMC Electrical Standard Spec 5.1 Section 6.10.4 for details.
+
+  @param[in]  PassThru      A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+  @param[in]  Slot          The slot number of the SD card to send the command to.
+  @param[out] ExtCsd        The buffer to store the content of the EXT_CSD register.
+
+  @retval EFI_SUCCESS       The operation is done correctly.
+  @retval Others            The operation fails.
+
+**/
+EFI_STATUS
+EmmcGetExtCsd (
+  IN     EFI_SD_MMC_PASS_THRU_PROTOCOL  *PassThru,
+  IN     UINT8                          Slot,
+     OUT EMMC_EXT_CSD                   *ExtCsd
+  )
+{
+  EFI_SD_MMC_COMMAND_BLOCK              SdMmcCmdBlk;
+  EFI_SD_MMC_STATUS_BLOCK               SdMmcStatusBlk;
+  EFI_SD_MMC_PASS_THRU_COMMAND_PACKET   Packet;
+  EFI_STATUS                            Status;
+
+  ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
+  ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
+  ZeroMem (&Packet, sizeof (Packet));
+
+  Packet.SdMmcCmdBlk    = &SdMmcCmdBlk;
+  Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
+  Packet.Timeout        = SD_MMC_HC_GENERIC_TIMEOUT;
+
+  SdMmcCmdBlk.CommandIndex = EMMC_SEND_EXT_CSD;
+  SdMmcCmdBlk.CommandType  = SdMmcCommandTypeAdtc;
+  SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR1;
+  SdMmcCmdBlk.CommandArgument = 0x00000000;
+
+  Packet.InDataBuffer     = ExtCsd;
+  Packet.InTransferLength = sizeof (EMMC_EXT_CSD);
+
+  Status = SdMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
+  return Status;
+}
+
+/**
+  Send command SWITCH to the EMMC device to switch the mode of operation of the
+  selected Device or modifies the EXT_CSD registers.
+
+  Refer to EMMC Electrical Standard Spec 5.1 Section 6.10.4 for details.
+
+  @param[in]  PassThru      A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+  @param[in]  Slot          The slot number of the SD card to send the command to.
+  @param[in]  Access        The access mode of SWTICH command.
+  @param[in]  Index         The offset of the field to be access.
+  @param[in]  Value         The value to be set to the specified field of EXT_CSD register.
+  @param[in]  CmdSet        The value of CmdSet field of EXT_CSD register.
+
+  @retval EFI_SUCCESS       The operation is done correctly.
+  @retval Others            The operation fails.
+
+**/
+EFI_STATUS
+EmmcSwitch (
+  IN EFI_SD_MMC_PASS_THRU_PROTOCOL      *PassThru,
+  IN UINT8                              Slot,
+  IN UINT8                              Access,
+  IN UINT8                              Index,
+  IN UINT8                              Value,
+  IN UINT8                              CmdSet
+  )
+{
+  EFI_SD_MMC_COMMAND_BLOCK              SdMmcCmdBlk;
+  EFI_SD_MMC_STATUS_BLOCK               SdMmcStatusBlk;
+  EFI_SD_MMC_PASS_THRU_COMMAND_PACKET   Packet;
+  EFI_STATUS                            Status;
+
+  ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
+  ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
+  ZeroMem (&Packet, sizeof (Packet));
+
+  Packet.SdMmcCmdBlk    = &SdMmcCmdBlk;
+  Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
+  Packet.Timeout        = SD_MMC_HC_GENERIC_TIMEOUT;
+
+  SdMmcCmdBlk.CommandIndex = EMMC_SWITCH;
+  SdMmcCmdBlk.CommandType  = SdMmcCommandTypeAc;
+  SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR1b;
+  SdMmcCmdBlk.CommandArgument = (Access << 24) | (Index << 16) | (Value << 8) | CmdSet;
+
+  Status = SdMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
+
+  return Status;
+}
+
+/**
+  Send command SEND_STATUS to the addressed EMMC device to get its status register.
+
+  Refer to EMMC Electrical Standard Spec 5.1 Section 6.10.4 for details.
+
+  @param[in]  PassThru      A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+  @param[in]  Slot          The slot number of the SD card to send the command to.
+  @param[in]  Rca           The relative device address of addressed device.
+  @param[out] DevStatus     The returned device status.
+
+  @retval EFI_SUCCESS       The operation is done correctly.
+  @retval Others            The operation fails.
+
+**/
+EFI_STATUS
+EmmcSendStatus (
+  IN     EFI_SD_MMC_PASS_THRU_PROTOCOL  *PassThru,
+  IN     UINT8                          Slot,
+  IN     UINT16                         Rca,
+     OUT UINT32                         *DevStatus
+  )
+{
+  EFI_SD_MMC_COMMAND_BLOCK              SdMmcCmdBlk;
+  EFI_SD_MMC_STATUS_BLOCK               SdMmcStatusBlk;
+  EFI_SD_MMC_PASS_THRU_COMMAND_PACKET   Packet;
+  EFI_STATUS                            Status;
+
+  ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
+  ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
+  ZeroMem (&Packet, sizeof (Packet));
+
+  Packet.SdMmcCmdBlk    = &SdMmcCmdBlk;
+  Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
+  Packet.Timeout        = SD_MMC_HC_GENERIC_TIMEOUT;
+
+  SdMmcCmdBlk.CommandIndex = EMMC_SEND_STATUS;
+  SdMmcCmdBlk.CommandType  = SdMmcCommandTypeAc;
+  SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR1;
+  SdMmcCmdBlk.CommandArgument = (UINT32)Rca << 16;
+
+  Status = SdMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
+  if (!EFI_ERROR (Status)) {
+    *DevStatus = SdMmcStatusBlk.Resp0;
+  }
+
+  return Status;
+}
+
+/**
+  Send command SEND_TUNING_BLOCK to the EMMC device for HS200 optimal sampling point
+  detection.
+
+  It may be sent up to 40 times until the host finishes the tuning procedure.
+
+  Refer to EMMC Electrical Standard Spec 5.1 Section 6.6.8 for details.
+
+  @param[in] PassThru       A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+  @param[in] Slot           The slot number of the SD card to send the command to.
+  @param[in] BusWidth       The bus width to work.
+
+  @retval EFI_SUCCESS       The operation is done correctly.
+  @retval Others            The operation fails.
+
+**/
+EFI_STATUS
+EmmcSendTuningBlk (
+  IN EFI_SD_MMC_PASS_THRU_PROTOCOL      *PassThru,
+  IN UINT8                              Slot,
+  IN UINT8                              BusWidth
+  )
+{
+  EFI_SD_MMC_COMMAND_BLOCK              SdMmcCmdBlk;
+  EFI_SD_MMC_STATUS_BLOCK               SdMmcStatusBlk;
+  EFI_SD_MMC_PASS_THRU_COMMAND_PACKET   Packet;
+  EFI_STATUS                            Status;
+  UINT8                                 TuningBlock[128];
+
+  ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
+  ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
+  ZeroMem (&Packet, sizeof (Packet));
+
+  Packet.SdMmcCmdBlk    = &SdMmcCmdBlk;
+  Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
+  Packet.Timeout        = SD_MMC_HC_GENERIC_TIMEOUT;
+
+  SdMmcCmdBlk.CommandIndex = EMMC_SEND_TUNING_BLOCK;
+  SdMmcCmdBlk.CommandType  = SdMmcCommandTypeAdtc;
+  SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR1;
+  SdMmcCmdBlk.CommandArgument = 0;
+
+  Packet.InDataBuffer = TuningBlock;
+  if (BusWidth == 8) {
+    Packet.InTransferLength = sizeof (TuningBlock);
+  } else {
+    Packet.InTransferLength = 64;
+  }
+
+  Status = SdMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
+
+  return Status;
+}
+
+/**
+  Tunning the clock to get HS200 optimal sampling point.
+
+  Command SEND_TUNING_BLOCK may be sent up to 40 times until the host finishes the
+  tuning procedure.
+
+  Refer to EMMC Electrical Standard Spec 5.1 Section 6.6.8 and SD Host Controller
+  Simplified Spec 3.0 Figure 2-29 for details.
+
+  @param[in] PciIo          A pointer to the EFI_PCI_IO_PROTOCOL instance.
+  @param[in] PassThru       A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+  @param[in] Slot           The slot number of the SD card to send the command to.
+  @param[in] BusWidth       The bus width to work.
+
+  @retval EFI_SUCCESS       The operation is done correctly.
+  @retval Others            The operation fails.
+
+**/
+EFI_STATUS
+EmmcTuningClkForHs200 (
+  IN EFI_PCI_IO_PROTOCOL                *PciIo,
+  IN EFI_SD_MMC_PASS_THRU_PROTOCOL      *PassThru,
+  IN UINT8                              Slot,
+  IN UINT8                              BusWidth
+  )
+{
+  EFI_STATUS          Status;
+  UINT8               HostCtrl2;
+  UINT8               Retry;
+
+  //
+  // Notify the host that the sampling clock tuning procedure starts.
+  //
+  HostCtrl2 = BIT6;
+  Status = SdMmcHcOrMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL2, sizeof (HostCtrl2), &HostCtrl2);
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+  //
+  // Ask the device to send a sequence of tuning blocks till the tuning procedure is done.
+  //
+  Retry = 0;
+  do {
+    Status = EmmcSendTuningBlk (PassThru, Slot, BusWidth);
+    if (EFI_ERROR (Status)) {
+      DEBUG ((DEBUG_ERROR, "EmmcTuningClkForHs200: Send tuning block fails with %r\n", Status));
+      return Status;
+    }
+
+    Status = SdMmcHcRwMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL2, TRUE, sizeof (HostCtrl2), &HostCtrl2);
+    if (EFI_ERROR (Status)) {
+      return Status;
+    }
+
+    if ((HostCtrl2 & (BIT6 | BIT7)) == 0) {
+      break;
+    }
+
+    if ((HostCtrl2 & (BIT6 | BIT7)) == BIT7) {
+      return EFI_SUCCESS;
+    }
+  } while (++Retry < 40);
+
+  DEBUG ((DEBUG_ERROR, "EmmcTuningClkForHs200: Send tuning block fails at %d times with HostCtrl2 %02x\n", Retry, HostCtrl2));
+  //
+  // Abort the tuning procedure and reset the tuning circuit.
+  //
+  HostCtrl2 = (UINT8)~(BIT6 | BIT7);
+  Status = SdMmcHcAndMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL2, sizeof (HostCtrl2), &HostCtrl2);
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+  return EFI_DEVICE_ERROR;
+}
+
+/**
+  Switch the bus width to specified width.
+
+  Refer to EMMC Electrical Standard Spec 5.1 Section 6.6.9 and SD Host Controller
+  Simplified Spec 3.0 Figure 3-7 for details.
+
+  @param[in] PciIo          A pointer to the EFI_PCI_IO_PROTOCOL instance.
+  @param[in] PassThru       A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+  @param[in] Slot           The slot number of the SD card to send the command to.
+  @param[in] Rca            The relative device address to be assigned.
+  @param[in] IsDdr          If TRUE, use dual data rate data simpling method. Otherwise
+                            use single data rate data simpling method.
+  @param[in] BusWidth       The bus width to be set, it could be 4 or 8.
+
+  @retval EFI_SUCCESS       The operation is done correctly.
+  @retval Others            The operation fails.
+
+**/
+EFI_STATUS
+EmmcSwitchBusWidth (
+  IN EFI_PCI_IO_PROTOCOL                *PciIo,
+  IN EFI_SD_MMC_PASS_THRU_PROTOCOL      *PassThru,
+  IN UINT8                              Slot,
+  IN UINT16                             Rca,
+  IN BOOLEAN                            IsDdr,
+  IN UINT8                              BusWidth
+  )
+{
+  EFI_STATUS          Status;
+  UINT8               Access;
+  UINT8               Index;
+  UINT8               Value;
+  UINT8               CmdSet;
+  UINT32              DevStatus;
+
+  //
+  // Write Byte, the Value field is written into the byte pointed by Index.
+  //
+  Access = 0x03;
+  Index  = OFFSET_OF (EMMC_EXT_CSD, BusWidth);
+  if (BusWidth == 4) {
+    Value = 1;
+  } else if (BusWidth == 8) {
+    Value = 2;
+  } else {
+    return EFI_INVALID_PARAMETER;
+  }
+
+  if (IsDdr) {
+    Value += 4;
+  }
+
+  CmdSet = 0;
+  Status = EmmcSwitch (PassThru, Slot, Access, Index, Value, CmdSet);
+  if (EFI_ERROR (Status)) {
+    DEBUG ((DEBUG_ERROR, "EmmcSwitchBusWidth: Switch to bus width %d fails with %r\n", BusWidth, Status));
+    return Status;
+  }
+
+  Status = EmmcSendStatus (PassThru, Slot, Rca, &DevStatus);
+  if (EFI_ERROR (Status)) {
+    DEBUG ((DEBUG_ERROR, "EmmcSwitchBusWidth: Send status fails with %r\n", Status));
+    return Status;
+  }
+  //
+  // Check the switch operation is really successful or not.
+  //
+  if ((DevStatus & BIT7) != 0) {
+    DEBUG ((DEBUG_ERROR, "EmmcSwitchBusWidth: The switch operation fails as DevStatus is 0x%08x\n", DevStatus));
+    return EFI_DEVICE_ERROR;
+  }
+
+  Status = SdMmcHcSetBusWidth (PciIo, Slot, BusWidth);
+
+  return Status;
+}
+
+/**
+  Switch the clock frequency to the specified value.
+
+  Refer to EMMC Electrical Standard Spec 5.1 Section 6.6 and SD Host Controller
+  Simplified Spec 3.0 Figure 3-3 for details.
+
+  @param[in] PciIo          A pointer to the EFI_PCI_IO_PROTOCOL instance.
+  @param[in] PassThru       A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+  @param[in] Slot           The slot number of the SD card to send the command to.
+  @param[in] Rca            The relative device address to be assigned.
+  @param[in] HsTiming       The value to be written to HS_TIMING field of EXT_CSD register.
+  @param[in] ClockFreq      The max clock frequency to be set, the unit is MHz.
+
+  @retval EFI_SUCCESS       The operation is done correctly.
+  @retval Others            The operation fails.
+
+**/
+EFI_STATUS
+EmmcSwitchClockFreq (
+  IN EFI_PCI_IO_PROTOCOL                *PciIo,
+  IN EFI_SD_MMC_PASS_THRU_PROTOCOL      *PassThru,
+  IN UINT8                              Slot,
+  IN UINT16                             Rca,
+  IN UINT8                              HsTiming,
+  IN UINT32                             ClockFreq
+  )
+{
+  EFI_STATUS                Status;
+  UINT8                     Access;
+  UINT8                     Index;
+  UINT8                     Value;
+  UINT8                     CmdSet;
+  UINT32                    DevStatus;
+  SD_MMC_HC_PRIVATE_DATA    *Private;
+
+  Private = SD_MMC_HC_PRIVATE_FROM_THIS (PassThru);
+  //
+  // Write Byte, the Value field is written into the byte pointed by Index.
+  //
+  Access = 0x03;
+  Index  = OFFSET_OF (EMMC_EXT_CSD, HsTiming);
+  Value  = HsTiming;
+  CmdSet = 0;
+
+  Status = EmmcSwitch (PassThru, Slot, Access, Index, Value, CmdSet);
+  if (EFI_ERROR (Status)) {
+    DEBUG ((DEBUG_ERROR, "EmmcSwitchClockFreq: Switch to hstiming %d fails with %r\n", HsTiming, Status));
+    return Status;
+  }
+
+  Status = EmmcSendStatus (PassThru, Slot, Rca, &DevStatus);
+  if (EFI_ERROR (Status)) {
+    DEBUG ((DEBUG_ERROR, "EmmcSwitchClockFreq: Send status fails with %r\n", Status));
+    return Status;
+  }
+  //
+  // Check the switch operation is really successful or not.
+  //
+  if ((DevStatus & BIT7) != 0) {
+    DEBUG ((DEBUG_ERROR, "EmmcSwitchClockFreq: The switch operation fails as DevStatus is 0x%08x\n", DevStatus));
+    return EFI_DEVICE_ERROR;
+  }
+  //
+  // Convert the clock freq unit from MHz to KHz.
+  //
+  Status = SdMmcHcClockSupply (PciIo, Slot, ClockFreq * 1000, Private->Capability[Slot]);
+
+  return Status;
+}
+
+/**
+  Switch to the High Speed timing according to request.
+
+  Refer to EMMC Electrical Standard Spec 5.1 Section 6.6.8 and SD Host Controller
+  Simplified Spec 3.0 Figure 2-29 for details.
+
+  @param[in] PciIo          A pointer to the EFI_PCI_IO_PROTOCOL instance.
+  @param[in] PassThru       A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+  @param[in] Slot           The slot number of the SD card to send the command to.
+  @param[in] Rca            The relative device address to be assigned.
+  @param[in] ClockFreq      The max clock frequency to be set.
+  @param[in] IsDdr          If TRUE, use dual data rate data simpling method. Otherwise
+                            use single data rate data simpling method.
+  @param[in] BusWidth       The bus width to be set, it could be 4 or 8.
+
+  @retval EFI_SUCCESS       The operation is done correctly.
+  @retval Others            The operation fails.
+
+**/
+EFI_STATUS
+EmmcSwitchToHighSpeed (
+  IN EFI_PCI_IO_PROTOCOL                *PciIo,
+  IN EFI_SD_MMC_PASS_THRU_PROTOCOL      *PassThru,
+  IN UINT8                              Slot,
+  IN UINT16                             Rca,
+  IN UINT32                             ClockFreq,
+  IN BOOLEAN                            IsDdr,
+  IN UINT8                              BusWidth
+  )
+{
+  EFI_STATUS          Status;
+  UINT8               HsTiming;
+  UINT8               HostCtrl1;
+  UINT8               HostCtrl2;
+
+  Status = EmmcSwitchBusWidth (PciIo, PassThru, Slot, Rca, IsDdr, BusWidth);
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+  //
+  // Set to Hight Speed timing
+  //
+  HostCtrl1 = BIT2;
+  Status = SdMmcHcOrMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL1, sizeof (HostCtrl1), &HostCtrl1);
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+
+  //
+  // Clean UHS Mode Select field of Host Control 2 reigster before update
+  //
+  HostCtrl2 = (UINT8)~0x7;
+  Status = SdMmcHcAndMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL2, sizeof (HostCtrl2), &HostCtrl2);
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+  //
+  // Set UHS Mode Select field of Host Control 2 reigster to SDR12/25/50
+  //
+  if (IsDdr) {
+    HostCtrl2 = BIT2;
+  } else if (ClockFreq == 52) {
+    HostCtrl2 = BIT0;
+  } else {
+    HostCtrl2 = 0;
+  }
+  Status = SdMmcHcOrMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL2, sizeof (HostCtrl2), &HostCtrl2);
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+
+  HsTiming = 1;
+  Status = EmmcSwitchClockFreq (PciIo, PassThru, Slot, Rca, HsTiming, ClockFreq);
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+
+  return Status;
+}
+
+/**
+  Switch to the HS200 timing according to request.
+
+  Refer to EMMC Electrical Standard Spec 5.1 Section 6.6.8 and SD Host Controller
+  Simplified Spec 3.0 Figure 2-29 for details.
+
+  @param[in] PciIo          A pointer to the EFI_PCI_IO_PROTOCOL instance.
+  @param[in] PassThru       A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+  @param[in] Slot           The slot number of the SD card to send the command to.
+  @param[in] Rca            The relative device address to be assigned.
+  @param[in] ClockFreq      The max clock frequency to be set.
+  @param[in] BusWidth       The bus width to be set, it could be 4 or 8.
+
+  @retval EFI_SUCCESS       The operation is done correctly.
+  @retval Others            The operation fails.
+
+**/
+EFI_STATUS
+EmmcSwitchToHS200 (
+  IN EFI_PCI_IO_PROTOCOL                *PciIo,
+  IN EFI_SD_MMC_PASS_THRU_PROTOCOL      *PassThru,
+  IN UINT8                              Slot,
+  IN UINT16                             Rca,
+  IN UINT32                             ClockFreq,
+  IN UINT8                              BusWidth
+  )
+{
+  EFI_STATUS          Status;
+  UINT8               HsTiming;
+  UINT8               HostCtrl2;
+  UINT16              ClockCtrl;
+
+  if ((BusWidth != 4) && (BusWidth != 8)) {
+    return EFI_INVALID_PARAMETER;
+  }
+
+  Status = EmmcSwitchBusWidth (PciIo, PassThru, Slot, Rca, FALSE, BusWidth);
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+  //
+  // Set to HS200/SDR104 timing
+  //
+  //
+  // Stop bus clock at first
+  //
+  Status = SdMmcHcStopClock (PciIo, Slot);
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+  //
+  // Clean UHS Mode Select field of Host Control 2 reigster before update
+  //
+  HostCtrl2 = (UINT8)~0x7;
+  Status = SdMmcHcAndMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL2, sizeof (HostCtrl2), &HostCtrl2);
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+  //
+  // Set UHS Mode Select field of Host Control 2 reigster to SDR104
+  //
+  HostCtrl2 = BIT0 | BIT1;
+  Status = SdMmcHcOrMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL2, sizeof (HostCtrl2), &HostCtrl2);
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+  //
+  // Wait Internal Clock Stable in the Clock Control register to be 1 before set SD Clock Enable bit
+  //
+  Status = SdMmcHcWaitMmioSet (
+             PciIo,
+             Slot,
+             SD_MMC_HC_CLOCK_CTRL,
+             sizeof (ClockCtrl),
+             BIT1,
+             BIT1,
+             SD_MMC_HC_GENERIC_TIMEOUT
+             );
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+  //
+  // Set SD Clock Enable in the Clock Control register to 1
+  //
+  ClockCtrl = BIT2;
+  Status = SdMmcHcOrMmio (PciIo, Slot, SD_MMC_HC_CLOCK_CTRL, sizeof (ClockCtrl), &ClockCtrl);
+
+  HsTiming = 2;
+  Status = EmmcSwitchClockFreq (PciIo, PassThru, Slot, Rca, HsTiming, ClockFreq);
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+
+  Status = EmmcTuningClkForHs200 (PciIo, PassThru, Slot, BusWidth);
+
+  return Status;
+}
+
+/**
+  Switch to the HS400 timing according to request.
+
+  Refer to EMMC Electrical Standard Spec 5.1 Section 6.6.8 and SD Host Controller
+  Simplified Spec 3.0 Figure 2-29 for details.
+
+  @param[in] PciIo          A pointer to the EFI_PCI_IO_PROTOCOL instance.
+  @param[in] PassThru       A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+  @param[in] Slot           The slot number of the SD card to send the command to.
+  @param[in] Rca            The relative device address to be assigned.
+  @param[in] ClockFreq      The max clock frequency to be set.
+
+  @retval EFI_SUCCESS       The operation is done correctly.
+  @retval Others            The operation fails.
+
+**/
+EFI_STATUS
+EmmcSwitchToHS400 (
+  IN EFI_PCI_IO_PROTOCOL                *PciIo,
+  IN EFI_SD_MMC_PASS_THRU_PROTOCOL      *PassThru,
+  IN UINT8                              Slot,
+  IN UINT16                             Rca,
+  IN UINT32                             ClockFreq
+  )
+{
+  EFI_STATUS          Status;
+  UINT8               HsTiming;
+  UINT8               HostCtrl2;
+
+  Status = EmmcSwitchToHS200 (PciIo, PassThru, Slot, Rca, ClockFreq, 8);
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+  //
+  // Set to Hight Speed timing and set the clock frequency to a value less than 52MHz.
+  //
+  HsTiming = 1;
+  Status = EmmcSwitchClockFreq (PciIo, PassThru, Slot, Rca, HsTiming, 52);
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+  //
+  // HS400 mode must use 8 data lines.
+  //
+  Status = EmmcSwitchBusWidth (PciIo, PassThru, Slot, Rca, TRUE, 8);
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+  //
+  // Clean UHS Mode Select field of Host Control 2 reigster before update
+  //
+  HostCtrl2 = (UINT8)~0x7;
+  Status = SdMmcHcAndMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL2, sizeof (HostCtrl2), &HostCtrl2);
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+  //
+  // Set UHS Mode Select field of Host Control 2 reigster to HS400
+  //
+  HostCtrl2 = BIT0 | BIT2;
+  Status = SdMmcHcOrMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL2, sizeof (HostCtrl2), &HostCtrl2);
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+
+  HsTiming = 3;
+  Status = EmmcSwitchClockFreq (PciIo, PassThru, Slot, Rca, HsTiming, ClockFreq);
+
+  return Status;
+}
+
+/**
+  Switch the high speed timing according to request.
+
+  Refer to EMMC Electrical Standard Spec 5.1 Section 6.6.8 and SD Host Controller
+  Simplified Spec 3.0 Figure 2-29 for details.
+
+  @param[in] PciIo          A pointer to the EFI_PCI_IO_PROTOCOL instance.
+  @param[in] PassThru       A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+  @param[in] Slot           The slot number of the SD card to send the command to.
+  @param[in] Rca            The relative device address to be assigned.
+
+  @retval EFI_SUCCESS       The operation is done correctly.
+  @retval Others            The operation fails.
+
+**/
+EFI_STATUS
+EmmcSetBusMode (
+  IN EFI_PCI_IO_PROTOCOL                *PciIo,
+  IN EFI_SD_MMC_PASS_THRU_PROTOCOL      *PassThru,
+  IN UINT8                              Slot,
+  IN UINT16                             Rca
+  )
+{
+  EFI_STATUS                    Status;
+  EMMC_CSD                      Csd;
+  EMMC_EXT_CSD                  ExtCsd;
+  UINT8                         HsTiming;
+  BOOLEAN                       IsDdr;
+  UINT32                        ClockFreq;
+  UINT8                         BusWidth;
+  SD_MMC_HC_PRIVATE_DATA        *Private;
+
+  Private = SD_MMC_HC_PRIVATE_FROM_THIS (PassThru);
+
+  Status = EmmcGetCsd (PassThru, Slot, Rca, &Csd);
+  if (EFI_ERROR (Status)) {
+    DEBUG ((DEBUG_ERROR, "EmmcSetBusMode: GetCsd fails with %r\n", Status));
+    return Status;
+  }
+
+  Status = EmmcSelect (PassThru, Slot, Rca);
+  if (EFI_ERROR (Status)) {
+    DEBUG ((DEBUG_ERROR, "EmmcSetBusMode: Select fails with %r\n", Status));
+    return Status;
+  }
+
+  ASSERT (Private->Capability[Slot].BaseClkFreq != 0);
+  //
+  // Check if the Host Controller support 8bits bus width.
+  //
+  if (Private->Capability[Slot].BusWidth8 != 0) {
+    BusWidth = 8;
+  } else {
+    BusWidth = 4;
+  }
+  //
+  // Get Deivce_Type from EXT_CSD register.
+  //
+  Status = EmmcGetExtCsd (PassThru, Slot, &ExtCsd);
+  if (EFI_ERROR (Status)) {
+    DEBUG ((DEBUG_ERROR, "EmmcSetBusMode: GetExtCsd fails with %r\n", Status));
+    return Status;
+  }
+  //
+  // Calculate supported bus speed/bus width/clock frequency.
+  //
+  HsTiming  = 0;
+  IsDdr     = FALSE;
+  ClockFreq = 0;
+  if (((ExtCsd.DeviceType & (BIT4 | BIT5))  != 0) && (Private->Capability[Slot].Sdr104 != 0)) {
+    HsTiming  = 2;
+    IsDdr     = FALSE;
+    ClockFreq = 200;
+  } else if (((ExtCsd.DeviceType & (BIT2 | BIT3))  != 0) && (Private->Capability[Slot].Ddr50 != 0)) {
+    HsTiming  = 1;
+    IsDdr     = TRUE;
+    ClockFreq = 52;
+  } else if (((ExtCsd.DeviceType & BIT1)  != 0) && (Private->Capability[Slot].HighSpeed != 0)) {
+    HsTiming  = 1;
+    IsDdr     = FALSE;
+    ClockFreq = 52;
+  } else if (((ExtCsd.DeviceType & BIT0)  != 0) && (Private->Capability[Slot].HighSpeed != 0)) {
+    HsTiming  = 1;
+    IsDdr     = FALSE;
+    ClockFreq = 26;
+  }
+  //
+  // Check if both of the device and the host controller support HS400 DDR mode.
+  //
+  if (((ExtCsd.DeviceType & (BIT6 | BIT7))  != 0) && (Private->Capability[Slot].Hs400 != 0)) {
+    //
+    // The host controller supports 8bits bus.
+    //
+    ASSERT (BusWidth == 8);
+    HsTiming  = 3;
+    IsDdr     = TRUE;
+    ClockFreq = 200;
+  }
+
+  if ((ClockFreq == 0) || (HsTiming == 0)) {
+    //
+    // Continue using default setting.
+    //
+    return EFI_SUCCESS;
+  }
+
+  DEBUG ((DEBUG_INFO, "EmmcSetBusMode: HsTiming %d ClockFreq %d BusWidth %d Ddr %a\n", HsTiming, ClockFreq, BusWidth, IsDdr ? "TRUE":"FALSE"));
+
+  if (HsTiming == 3) {
+    //
+    // Execute HS400 timing switch procedure
+    //
+    Status = EmmcSwitchToHS400 (PciIo, PassThru, Slot, Rca, ClockFreq);
+  } else if (HsTiming == 2) {
+    //
+    // Execute HS200 timing switch procedure
+    //
+    Status = EmmcSwitchToHS200 (PciIo, PassThru, Slot, Rca, ClockFreq, BusWidth);
+  } else {
+    //
+    // Execute High Speed timing switch procedure
+    //
+    Status = EmmcSwitchToHighSpeed (PciIo, PassThru, Slot, Rca, ClockFreq, IsDdr, BusWidth);
+  }
+
+  DEBUG ((DEBUG_INFO, "EmmcSetBusMode: Switch to %a %r\n", (HsTiming == 3) ? "HS400" : ((HsTiming == 2) ? "HS200" : "HighSpeed"), Status));
+
+  return Status;
+}
+
+/**
+  Execute EMMC device identification procedure.
+
+  Refer to EMMC Electrical Standard Spec 5.1 Section 6.4 for details.
+
+  @param[in] Private        A pointer to the SD_MMC_HC_PRIVATE_DATA instance.
+  @param[in] Slot           The slot number of the SD card to send the command to.
+
+  @retval EFI_SUCCESS       There is a EMMC card.
+  @retval Others            There is not a EMMC card.
+
+**/
+EFI_STATUS
+EmmcIdentification (
+  IN SD_MMC_HC_PRIVATE_DATA             *Private,
+  IN UINT8                              Slot
+  )
+{
+  EFI_STATUS                     Status;
+  EFI_PCI_IO_PROTOCOL            *PciIo;
+  EFI_SD_MMC_PASS_THRU_PROTOCOL  *PassThru;
+  UINT32                         Ocr;
+  UINT16                         Rca;
+
+  PciIo    = Private->PciIo;
+  PassThru = &Private->PassThru;
+
+  Status = EmmcReset (PassThru, Slot);
+  if (EFI_ERROR (Status)) {
+    DEBUG ((DEBUG_VERBOSE, "EmmcIdentification: Executing Cmd0 fails with %r\n", Status));
+    return Status;
+  }
+
+  Ocr = 0;
+  do {
+    Status = EmmcGetOcr (PassThru, Slot, &Ocr);
+    if (EFI_ERROR (Status)) {
+      DEBUG ((DEBUG_VERBOSE, "EmmcIdentification: Executing Cmd1 fails with %r\n", Status));
+      return Status;
+    }
+    Ocr |= BIT30;
+  } while ((Ocr & BIT31) == 0);
+
+  Status = EmmcGetAllCid (PassThru, Slot);
+  if (EFI_ERROR (Status)) {
+    DEBUG ((DEBUG_VERBOSE, "EmmcIdentification: Executing Cmd2 fails with %r\n", Status));
+    return Status;
+  }
+  //
+  // Slot starts from 0 and valid RCA starts from 1.
+  // Here we takes a simple formula to calculate the RCA.
+  // Don't support multiple devices on the slot, that is
+  // shared bus slot feature.
+  //
+  Rca    = Slot + 1;
+  Status = EmmcSetRca (PassThru, Slot, Rca);
+  if (EFI_ERROR (Status)) {
+    DEBUG ((DEBUG_ERROR, "EmmcIdentification: Executing Cmd3 fails with %r\n", Status));
+    return Status;
+  }
+  //
+  // Enter Data Tranfer Mode.
+  //
+  DEBUG ((DEBUG_INFO, "EmmcIdentification: Found a EMMC device at slot [%d], RCA [%d]\n", Slot, Rca));
+  Private->Slot[Slot].CardType = EmmcCardType;
+
+  Status = EmmcSetBusMode (PciIo, PassThru, Slot, Rca);
+
+  return Status;
+}
+
diff --git a/Drivers/SdMmc/Xenon/MvSdDevice.c b/Drivers/SdMmc/Xenon/MvSdDevice.c
new file mode 100644
index 0000000..9122848
--- /dev/null
+++ b/Drivers/SdMmc/Xenon/MvSdDevice.c
@@ -0,0 +1,1190 @@
+/** @file
+  This file provides some helper functions which are specific for SD card device.
+
+  Copyright (c) 2015 - 2016, Intel Corporation. All rights reserved.<BR>
+  This program and the accompanying materials
+  are licensed and made available under the terms and conditions of the BSD License
+  which accompanies this distribution.  The full text of the license may be found at
+  http://opensource.org/licenses/bsd-license.php
+
+  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "SdMmcPciHcDxe.h"
+
+/**
+  Send command GO_IDLE_STATE to the device to make it go to Idle State.
+
+  Refer to SD Physical Layer Simplified Spec 4.1 Section 4.7 for details.
+
+  @param[in] PassThru       A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+  @param[in] Slot           The slot number of the SD card to send the command to.
+
+  @retval EFI_SUCCESS       The SD device is reset correctly.
+  @retval Others            The device reset fails.
+
+**/
+EFI_STATUS
+SdCardReset (
+  IN EFI_SD_MMC_PASS_THRU_PROTOCOL      *PassThru,
+  IN UINT8                              Slot
+  )
+{
+  EFI_SD_MMC_COMMAND_BLOCK              SdMmcCmdBlk;
+  EFI_SD_MMC_STATUS_BLOCK               SdMmcStatusBlk;
+  EFI_SD_MMC_PASS_THRU_COMMAND_PACKET   Packet;
+  EFI_STATUS                            Status;
+
+  ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
+  ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
+  ZeroMem (&Packet, sizeof (Packet));
+
+  Packet.SdMmcCmdBlk    = &SdMmcCmdBlk;
+  Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
+  Packet.Timeout        = SD_MMC_HC_GENERIC_TIMEOUT;
+
+  SdMmcCmdBlk.CommandIndex = SD_GO_IDLE_STATE;
+  SdMmcCmdBlk.CommandType  = SdMmcCommandTypeBc;
+
+  Status = SdMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
+
+  return Status;
+}
+
+/**
+  Send command SEND_IF_COND to the device to inquiry the SD Memory Card interface
+  condition.
+
+  Refer to SD Physical Layer Simplified Spec 4.1 Section 4.7 for details.
+
+  @param[in] PassThru       A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+  @param[in] Slot           The slot number of the SD card to send the command to.
+  @param[in] SupplyVoltage  The supplied voltage by the host.
+  @param[in] CheckPattern   The check pattern to be sent to the device.
+
+  @retval EFI_SUCCESS       The operation is done correctly.
+  @retval Others            The operation fails.
+
+**/
+EFI_STATUS
+SdCardVoltageCheck (
+  IN EFI_SD_MMC_PASS_THRU_PROTOCOL      *PassThru,
+  IN UINT8                              Slot,
+  IN UINT8                              SupplyVoltage,
+  IN UINT8                              CheckPattern
+  )
+{
+  EFI_SD_MMC_COMMAND_BLOCK              SdMmcCmdBlk;
+  EFI_SD_MMC_STATUS_BLOCK               SdMmcStatusBlk;
+  EFI_SD_MMC_PASS_THRU_COMMAND_PACKET   Packet;
+  EFI_STATUS                            Status;
+
+  ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
+  ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
+  ZeroMem (&Packet, sizeof (Packet));
+
+  Packet.SdMmcCmdBlk    = &SdMmcCmdBlk;
+  Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
+  Packet.Timeout        = SD_MMC_HC_GENERIC_TIMEOUT;
+
+  SdMmcCmdBlk.CommandIndex = SD_SEND_IF_COND;
+  SdMmcCmdBlk.CommandType  = SdMmcCommandTypeBcr;
+  SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR7;
+  SdMmcCmdBlk.CommandArgument = (SupplyVoltage << 8) | CheckPattern;
+
+  Status = SdMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
+
+  if (!EFI_ERROR (Status)) {
+    if (SdMmcStatusBlk.Resp0 != SdMmcCmdBlk.CommandArgument) {
+      return EFI_DEVICE_ERROR;
+    }
+  }
+
+  return Status;
+}
+
+/**
+  Send command SDIO_SEND_OP_COND to the device to see whether it is SDIO device.
+
+  Refer to SDIO Simplified Spec 3 Section 3.2 for details.
+
+  @param[in] PassThru       A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+  @param[in] Slot           The slot number of the SD card to send the command to.
+  @param[in] VoltageWindow  The supply voltage window.
+  @param[in] S18R           The boolean to show if it should switch to 1.8v.
+
+  @retval EFI_SUCCESS       The operation is done correctly.
+  @retval Others            The operation fails.
+
+**/
+EFI_STATUS
+SdioSendOpCond (
+  IN EFI_SD_MMC_PASS_THRU_PROTOCOL      *PassThru,
+  IN UINT8                              Slot,
+  IN UINT32                             VoltageWindow,
+  IN BOOLEAN                            S18R
+  )
+{
+  EFI_SD_MMC_COMMAND_BLOCK              SdMmcCmdBlk;
+  EFI_SD_MMC_STATUS_BLOCK               SdMmcStatusBlk;
+  EFI_SD_MMC_PASS_THRU_COMMAND_PACKET   Packet;
+  EFI_STATUS                            Status;
+  UINT32                                Switch;
+
+  ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
+  ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
+  ZeroMem (&Packet, sizeof (Packet));
+
+  Packet.SdMmcCmdBlk    = &SdMmcCmdBlk;
+  Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
+  Packet.Timeout        = SD_MMC_HC_GENERIC_TIMEOUT;
+
+  SdMmcCmdBlk.CommandIndex = SDIO_SEND_OP_COND;
+  SdMmcCmdBlk.CommandType  = SdMmcCommandTypeBcr;
+  SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR4;
+
+  Switch = S18R ? BIT24 : 0;
+
+  SdMmcCmdBlk.CommandArgument = (VoltageWindow & 0xFFFFFF) | Switch;
+
+  Status = SdMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
+
+  return Status;
+}
+
+/**
+  Send command SD_SEND_OP_COND to the device to see whether it is SDIO device.
+
+  Refer to SD Physical Layer Simplified Spec 4.1 Section 4.7 for details.
+
+  @param[in]  PassThru       A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+  @param[in]  Slot           The slot number of the SD card to send the command to.
+  @param[in]  Rca            The relative device address of addressed device.
+  @param[in]  VoltageWindow  The supply voltage window.
+  @param[in]  S18R           The boolean to show if it should switch to 1.8v.
+  @param[in]  Xpc            The boolean to show if it should provide 0.36w power control.
+  @param[in]  Hcs            The boolean to show if it support host capacity info.
+  @param[out] Ocr            The buffer to store returned OCR register value.
+
+  @retval EFI_SUCCESS        The operation is done correctly.
+  @retval Others             The operation fails.
+
+**/
+EFI_STATUS
+SdCardSendOpCond (
+  IN     EFI_SD_MMC_PASS_THRU_PROTOCOL  *PassThru,
+  IN     UINT8                          Slot,
+  IN     UINT16                         Rca,
+  IN     UINT32                         VoltageWindow,
+  IN     BOOLEAN                        S18R,
+  IN     BOOLEAN                        Xpc,
+  IN     BOOLEAN                        Hcs,
+     OUT UINT32                         *Ocr
+  )
+{
+  EFI_SD_MMC_COMMAND_BLOCK              SdMmcCmdBlk;
+  EFI_SD_MMC_STATUS_BLOCK               SdMmcStatusBlk;
+  EFI_SD_MMC_PASS_THRU_COMMAND_PACKET   Packet;
+  EFI_STATUS                            Status;
+  UINT32                                Switch;
+  UINT32                                MaxPower;
+  UINT32                                HostCapacity;
+
+  ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
+  ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
+  ZeroMem (&Packet, sizeof (Packet));
+
+  Packet.SdMmcCmdBlk    = &SdMmcCmdBlk;
+  Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
+  Packet.Timeout        = SD_MMC_HC_GENERIC_TIMEOUT;
+
+  SdMmcCmdBlk.CommandIndex = SD_APP_CMD;
+  SdMmcCmdBlk.CommandType  = SdMmcCommandTypeAc;
+  SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR1;
+  SdMmcCmdBlk.CommandArgument = (UINT32)Rca << 16;
+
+  Status = SdMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+
+  SdMmcCmdBlk.CommandIndex = SD_SEND_OP_COND;
+  SdMmcCmdBlk.CommandType  = SdMmcCommandTypeBcr;
+  SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR3;
+
+  Switch       = S18R ? BIT24 : 0;
+  MaxPower     = Xpc ? BIT28 : 0;
+  HostCapacity = Hcs ? BIT30 : 0;
+
+  SdMmcCmdBlk.CommandArgument = (VoltageWindow & 0xFFFFFF) | Switch | MaxPower | HostCapacity;
+
+  Status = SdMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
+  if (!EFI_ERROR (Status)) {
+    //
+    // For details, refer to SD Host Controller Simplified Spec 3.0 Table 2-12.
+    //
+    *Ocr = SdMmcStatusBlk.Resp0;
+  }
+
+  return Status;
+}
+
+/**
+  Broadcast command ALL_SEND_CID to the bus to ask all the SD devices to send the
+  data of their CID registers.
+
+  Refer to SD Physical Layer Simplified Spec 4.1 Section 4.7 for details.
+
+  @param[in] PassThru       A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+  @param[in] Slot           The slot number of the SD card to send the command to.
+
+  @retval EFI_SUCCESS       The operation is done correctly.
+  @retval Others            The operation fails.
+
+**/
+EFI_STATUS
+SdCardAllSendCid (
+  IN EFI_SD_MMC_PASS_THRU_PROTOCOL      *PassThru,
+  IN UINT8                              Slot
+  )
+{
+  EFI_SD_MMC_COMMAND_BLOCK              SdMmcCmdBlk;
+  EFI_SD_MMC_STATUS_BLOCK               SdMmcStatusBlk;
+  EFI_SD_MMC_PASS_THRU_COMMAND_PACKET   Packet;
+  EFI_STATUS                            Status;
+
+  ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
+  ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
+  ZeroMem (&Packet, sizeof (Packet));
+
+  Packet.SdMmcCmdBlk    = &SdMmcCmdBlk;
+  Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
+  Packet.Timeout        = SD_MMC_HC_GENERIC_TIMEOUT;
+
+  SdMmcCmdBlk.CommandIndex = SD_ALL_SEND_CID;
+  SdMmcCmdBlk.CommandType  = SdMmcCommandTypeBcr;
+  SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR2;
+
+  Status = SdMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
+
+  return Status;
+}
+
+/**
+  Send command SET_RELATIVE_ADDR to the SD device to assign a Relative device
+  Address (RCA).
+
+  Refer to SD Physical Layer Simplified Spec 4.1 Section 4.7 for details.
+
+  @param[in]  PassThru      A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+  @param[in]  Slot          The slot number of the SD card to send the command to.
+  @param[out] Rca           The relative device address to assign.
+
+  @retval EFI_SUCCESS       The operation is done correctly.
+  @retval Others            The operation fails.
+
+**/
+EFI_STATUS
+SdCardSetRca (
+  IN     EFI_SD_MMC_PASS_THRU_PROTOCOL  *PassThru,
+  IN     UINT8                          Slot,
+     OUT UINT16                         *Rca
+  )
+{
+  EFI_SD_MMC_COMMAND_BLOCK              SdMmcCmdBlk;
+  EFI_SD_MMC_STATUS_BLOCK               SdMmcStatusBlk;
+  EFI_SD_MMC_PASS_THRU_COMMAND_PACKET   Packet;
+  EFI_STATUS                            Status;
+
+  ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
+  ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
+  ZeroMem (&Packet, sizeof (Packet));
+
+  Packet.SdMmcCmdBlk    = &SdMmcCmdBlk;
+  Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
+  Packet.Timeout        = SD_MMC_HC_GENERIC_TIMEOUT;
+
+  SdMmcCmdBlk.CommandIndex = SD_SET_RELATIVE_ADDR;
+  SdMmcCmdBlk.CommandType  = SdMmcCommandTypeBcr;
+  SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR6;
+
+  Status = SdMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
+  if (!EFI_ERROR (Status)) {
+    *Rca = (UINT16)(SdMmcStatusBlk.Resp0 >> 16);
+  }
+
+  return Status;
+}
+
+/**
+  Send command SEND_CSD to the SD device to get the data of the CSD register.
+
+  Refer to SD Physical Layer Simplified Spec 4.1 Section 4.7 for details.
+
+  @param[in]  PassThru      A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+  @param[in]  Slot          The slot number of the SD card to send the command to.
+  @param[in]  Rca           The relative device address of selected device.
+  @param[out] Csd           The buffer to store the content of the CSD register.
+                            Note the caller should ignore the lowest byte of this
+                            buffer as the content of this byte is meaningless even
+                            if the operation succeeds.
+
+  @retval EFI_SUCCESS       The operation is done correctly.
+  @retval Others            The operation fails.
+
+**/
+EFI_STATUS
+SdCardGetCsd (
+  IN     EFI_SD_MMC_PASS_THRU_PROTOCOL  *PassThru,
+  IN     UINT8                          Slot,
+  IN     UINT16                         Rca,
+     OUT SD_CSD                         *Csd
+  )
+{
+  EFI_SD_MMC_COMMAND_BLOCK              SdMmcCmdBlk;
+  EFI_SD_MMC_STATUS_BLOCK               SdMmcStatusBlk;
+  EFI_SD_MMC_PASS_THRU_COMMAND_PACKET   Packet;
+  EFI_STATUS                            Status;
+
+  ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
+  ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
+  ZeroMem (&Packet, sizeof (Packet));
+
+  Packet.SdMmcCmdBlk    = &SdMmcCmdBlk;
+  Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
+  Packet.Timeout        = SD_MMC_HC_GENERIC_TIMEOUT;
+
+  SdMmcCmdBlk.CommandIndex = SD_SEND_CSD;
+  SdMmcCmdBlk.CommandType  = SdMmcCommandTypeAc;
+  SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR2;
+  SdMmcCmdBlk.CommandArgument = (UINT32)Rca << 16;
+
+  Status = SdMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
+  if (!EFI_ERROR (Status)) {
+    //
+    // For details, refer to SD Host Controller Simplified Spec 3.0 Table 2-12.
+    //
+    CopyMem (((UINT8*)Csd) + 1, &SdMmcStatusBlk.Resp0, sizeof (SD_CSD) - 1);
+  }
+
+  return Status;
+}
+
+/**
+  Send command SEND_CSD to the SD device to get the data of the CSD register.
+
+  Refer to SD Physical Layer Simplified Spec 4.1 Section 4.7 for details.
+
+  @param[in]  PassThru      A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+  @param[in]  Slot          The slot number of the SD card to send the command to.
+  @param[in]  Rca           The relative device address of selected device.
+  @param[out] Scr           The buffer to store the content of the SCR register.
+
+  @retval EFI_SUCCESS       The operation is done correctly.
+  @retval Others            The operation fails.
+
+**/
+EFI_STATUS
+SdCardGetScr (
+  IN     EFI_SD_MMC_PASS_THRU_PROTOCOL  *PassThru,
+  IN     UINT8                          Slot,
+  IN     UINT16                         Rca,
+     OUT SD_SCR                         *Scr
+  )
+{
+  EFI_SD_MMC_COMMAND_BLOCK              SdMmcCmdBlk;
+  EFI_SD_MMC_STATUS_BLOCK               SdMmcStatusBlk;
+  EFI_SD_MMC_PASS_THRU_COMMAND_PACKET   Packet;
+  EFI_STATUS                            Status;
+
+  ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
+  ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
+  ZeroMem (&Packet, sizeof (Packet));
+
+  Packet.SdMmcCmdBlk    = &SdMmcCmdBlk;
+  Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
+  Packet.Timeout        = SD_MMC_HC_GENERIC_TIMEOUT;
+
+  SdMmcCmdBlk.CommandIndex = SD_APP_CMD;
+  SdMmcCmdBlk.CommandType  = SdMmcCommandTypeAc;
+  SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR1;
+  SdMmcCmdBlk.CommandArgument = (UINT32)Rca << 16;
+
+  Status = SdMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+
+  SdMmcCmdBlk.CommandIndex = SD_SEND_SCR;
+  SdMmcCmdBlk.CommandType  = SdMmcCommandTypeAdtc;
+  SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR1;
+
+  Packet.InDataBuffer     = Scr;
+  Packet.InTransferLength = sizeof (SD_SCR);
+
+  Status = SdMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
+
+  return Status;
+}
+
+/**
+  Send command SELECT_DESELECT_CARD to the SD device to select/deselect it.
+
+  Refer to SD Physical Layer Simplified Spec 4.1 Section 4.7 for details.
+
+  @param[in]  PassThru      A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+  @param[in]  Slot          The slot number of the SD card to send the command to.
+  @param[in]  Rca           The relative device address of selected device.
+
+  @retval EFI_SUCCESS       The operation is done correctly.
+  @retval Others            The operation fails.
+
+**/
+EFI_STATUS
+SdCardSelect (
+  IN EFI_SD_MMC_PASS_THRU_PROTOCOL      *PassThru,
+  IN UINT8                              Slot,
+  IN UINT16                             Rca
+  )
+{
+  EFI_SD_MMC_COMMAND_BLOCK              SdMmcCmdBlk;
+  EFI_SD_MMC_STATUS_BLOCK               SdMmcStatusBlk;
+  EFI_SD_MMC_PASS_THRU_COMMAND_PACKET   Packet;
+  EFI_STATUS                            Status;
+
+  ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
+  ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
+  ZeroMem (&Packet, sizeof (Packet));
+
+  Packet.SdMmcCmdBlk    = &SdMmcCmdBlk;
+  Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
+  Packet.Timeout        = SD_MMC_HC_GENERIC_TIMEOUT;
+
+  SdMmcCmdBlk.CommandIndex = SD_SELECT_DESELECT_CARD;
+  SdMmcCmdBlk.CommandType  = SdMmcCommandTypeAc;
+  if (Rca != 0) {
+    SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR1b;
+  }
+  SdMmcCmdBlk.CommandArgument = (UINT32)Rca << 16;
+
+  Status = SdMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
+
+  return Status;
+}
+
+/**
+  Send command VOLTAGE_SWITCH to the SD device to switch the voltage of the device.
+
+  Refer to SD Physical Layer Simplified Spec 4.1 Section 4.7 for details.
+
+  @param[in]  PassThru      A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+  @param[in]  Slot          The slot number of the SD card to send the command to.
+
+  @retval EFI_SUCCESS       The operation is done correctly.
+  @retval Others            The operation fails.
+
+**/
+EFI_STATUS
+SdCardVoltageSwitch (
+  IN EFI_SD_MMC_PASS_THRU_PROTOCOL      *PassThru,
+  IN UINT8                              Slot
+  )
+{
+  EFI_SD_MMC_COMMAND_BLOCK              SdMmcCmdBlk;
+  EFI_SD_MMC_STATUS_BLOCK               SdMmcStatusBlk;
+  EFI_SD_MMC_PASS_THRU_COMMAND_PACKET   Packet;
+  EFI_STATUS                            Status;
+
+  ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
+  ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
+  ZeroMem (&Packet, sizeof (Packet));
+
+  Packet.SdMmcCmdBlk    = &SdMmcCmdBlk;
+  Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
+  Packet.Timeout        = SD_MMC_HC_GENERIC_TIMEOUT;
+
+  SdMmcCmdBlk.CommandIndex = SD_VOLTAGE_SWITCH;
+  SdMmcCmdBlk.CommandType  = SdMmcCommandTypeAc;
+  SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR1;
+  SdMmcCmdBlk.CommandArgument = 0;
+
+  Status = SdMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
+
+  return Status;
+}
+
+/**
+  Send command SET_BUS_WIDTH to the SD device to set the bus width.
+
+  Refer to SD Physical Layer Simplified Spec 4.1 Section 4.7 for details.
+
+  @param[in] PassThru       A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+  @param[in] Slot           The slot number of the SD card to send the command to.
+  @param[in] Rca            The relative device address of addressed device.
+  @param[in] BusWidth       The bus width to be set, it could be 1 or 4.
+
+  @retval EFI_SUCCESS       The operation is done correctly.
+  @retval Others            The operation fails.
+
+**/
+EFI_STATUS
+SdCardSetBusWidth (
+  IN EFI_SD_MMC_PASS_THRU_PROTOCOL      *PassThru,
+  IN UINT8                              Slot,
+  IN UINT16                             Rca,
+  IN UINT8                              BusWidth
+  )
+{
+  EFI_SD_MMC_COMMAND_BLOCK              SdMmcCmdBlk;
+  EFI_SD_MMC_STATUS_BLOCK               SdMmcStatusBlk;
+  EFI_SD_MMC_PASS_THRU_COMMAND_PACKET   Packet;
+  EFI_STATUS                            Status;
+  UINT8                                 Value;
+
+  ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
+  ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
+  ZeroMem (&Packet, sizeof (Packet));
+
+  Packet.SdMmcCmdBlk    = &SdMmcCmdBlk;
+  Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
+  Packet.Timeout        = SD_MMC_HC_GENERIC_TIMEOUT;
+
+  SdMmcCmdBlk.CommandIndex = SD_APP_CMD;
+  SdMmcCmdBlk.CommandType  = SdMmcCommandTypeAc;
+  SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR1;
+  SdMmcCmdBlk.CommandArgument = (UINT32)Rca << 16;
+
+  Status = SdMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+
+  SdMmcCmdBlk.CommandIndex = SD_SET_BUS_WIDTH;
+  SdMmcCmdBlk.CommandType  = SdMmcCommandTypeAc;
+  SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR1;
+
+  if (BusWidth == 1) {
+    Value = 0;
+  } else if (BusWidth == 4) {
+    Value = 2;
+  } else {
+    return EFI_INVALID_PARAMETER;
+  }
+
+  SdMmcCmdBlk.CommandArgument = Value & 0x3;
+
+  Status = SdMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
+  return Status;
+}
+
+/**
+  Send command SWITCH_FUNC to the SD device to check switchable function or switch card function.
+
+  Refer to SD Physical Layer Simplified Spec 4.1 Section 4.7 for details.
+
+  @param[in]  PassThru      A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+  @param[in]  Slot          The slot number of the SD card to send the command to.
+  @param[in]  AccessMode    The value for access mode group.
+  @param[in]  CommandSystem The value for command set group.
+  @param[in]  DriveStrength The value for drive length group.
+  @param[in]  PowerLimit    The value for power limit group.
+  @param[in]  Mode          Switch or check function.
+  @param[out] SwitchResp    The return switch function status.
+
+  @retval EFI_SUCCESS       The operation is done correctly.
+  @retval Others            The operation fails.
+
+**/
+EFI_STATUS
+SdCardSwitch (
+  IN     EFI_SD_MMC_PASS_THRU_PROTOCOL  *PassThru,
+  IN     UINT8                          Slot,
+  IN     UINT8                          AccessMode,
+  IN     UINT8                          CommandSystem,
+  IN     UINT8                          DriveStrength,
+  IN     UINT8                          PowerLimit,
+  IN     BOOLEAN                        Mode,
+     OUT UINT8                          *SwitchResp
+  )
+{
+  EFI_SD_MMC_COMMAND_BLOCK              SdMmcCmdBlk;
+  EFI_SD_MMC_STATUS_BLOCK               SdMmcStatusBlk;
+  EFI_SD_MMC_PASS_THRU_COMMAND_PACKET   Packet;
+  EFI_STATUS                            Status;
+  UINT32                                ModeValue;
+
+  ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
+  ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
+  ZeroMem (&Packet, sizeof (Packet));
+
+  Packet.SdMmcCmdBlk    = &SdMmcCmdBlk;
+  Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
+  Packet.Timeout        = SD_MMC_HC_GENERIC_TIMEOUT;
+
+  SdMmcCmdBlk.CommandIndex = SD_SWITCH_FUNC;
+  SdMmcCmdBlk.CommandType  = SdMmcCommandTypeAdtc;
+  SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR1;
+
+  ModeValue = Mode ? BIT31 : 0;
+  SdMmcCmdBlk.CommandArgument = (AccessMode & 0xF) | ((PowerLimit & 0xF) << 4) | \
+                                ((DriveStrength & 0xF) << 8) | ((DriveStrength & 0xF) << 12) | \
+                                ModeValue;
+
+  Packet.InDataBuffer     = SwitchResp;
+  Packet.InTransferLength = 64;
+
+  Status = SdMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
+
+  return Status;
+}
+
+/**
+  Send command SEND_STATUS to the addressed SD device to get its status register.
+
+  Refer to SD Physical Layer Simplified Spec 4.1 Section 4.7 for details.
+
+  @param[in]  PassThru      A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+  @param[in]  Slot          The slot number of the SD card to send the command to.
+  @param[in]  Rca           The relative device address of addressed device.
+  @param[out] DevStatus     The returned device status.
+
+  @retval EFI_SUCCESS       The operation is done correctly.
+  @retval Others            The operation fails.
+
+**/
+EFI_STATUS
+SdCardSendStatus (
+  IN     EFI_SD_MMC_PASS_THRU_PROTOCOL  *PassThru,
+  IN     UINT8                          Slot,
+  IN     UINT16                         Rca,
+     OUT UINT32                         *DevStatus
+  )
+{
+  EFI_SD_MMC_COMMAND_BLOCK              SdMmcCmdBlk;
+  EFI_SD_MMC_STATUS_BLOCK               SdMmcStatusBlk;
+  EFI_SD_MMC_PASS_THRU_COMMAND_PACKET   Packet;
+  EFI_STATUS                            Status;
+
+  ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
+  ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
+  ZeroMem (&Packet, sizeof (Packet));
+
+  Packet.SdMmcCmdBlk    = &SdMmcCmdBlk;
+  Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
+  Packet.Timeout        = SD_MMC_HC_GENERIC_TIMEOUT;
+
+  SdMmcCmdBlk.CommandIndex = SD_SEND_STATUS;
+  SdMmcCmdBlk.CommandType  = SdMmcCommandTypeAc;
+  SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR1;
+  SdMmcCmdBlk.CommandArgument = (UINT32)Rca << 16;
+
+  Status = SdMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
+  if (!EFI_ERROR (Status)) {
+    *DevStatus = SdMmcStatusBlk.Resp0;
+  }
+
+  return Status;
+}
+
+/**
+  Send command SEND_TUNING_BLOCK to the SD device for HS200 optimal sampling point
+  detection.
+
+  It may be sent up to 40 times until the host finishes the tuning procedure.
+
+  Refer to SD Physical Layer Simplified Spec 4.1 Section 4.7 for details.
+
+  @param[in] PassThru       A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+  @param[in] Slot           The slot number of the SD card to send the command to.
+
+  @retval EFI_SUCCESS       The operation is done correctly.
+  @retval Others            The operation fails.
+
+**/
+EFI_STATUS
+SdCardSendTuningBlk (
+  IN EFI_SD_MMC_PASS_THRU_PROTOCOL      *PassThru,
+  IN UINT8                              Slot
+  )
+{
+  EFI_SD_MMC_COMMAND_BLOCK              SdMmcCmdBlk;
+  EFI_SD_MMC_STATUS_BLOCK               SdMmcStatusBlk;
+  EFI_SD_MMC_PASS_THRU_COMMAND_PACKET   Packet;
+  EFI_STATUS                            Status;
+  UINT8                                 TuningBlock[64];
+
+  ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
+  ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
+  ZeroMem (&Packet, sizeof (Packet));
+
+  Packet.SdMmcCmdBlk    = &SdMmcCmdBlk;
+  Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
+  Packet.Timeout        = SD_MMC_HC_GENERIC_TIMEOUT;
+
+  SdMmcCmdBlk.CommandIndex = SD_SEND_TUNING_BLOCK;
+  SdMmcCmdBlk.CommandType  = SdMmcCommandTypeAdtc;
+  SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR1;
+  SdMmcCmdBlk.CommandArgument = 0;
+
+  Packet.InDataBuffer     = TuningBlock;
+  Packet.InTransferLength = sizeof (TuningBlock);
+
+  Status = SdMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
+
+  return Status;
+}
+
+/**
+  Tunning the sampling point of SDR104 or SDR50 bus speed mode.
+
+  Command SD_SEND_TUNING_BLOCK may be sent up to 40 times until the host finishes the
+  tuning procedure.
+
+  Refer to SD Physical Layer Simplified Spec 4.1 Section 4.7 and
+  SD Host Controller Simplified Spec 3.0 section Figure 3-7 for details.
+
+  @param[in] PciIo          A pointer to the EFI_PCI_IO_PROTOCOL instance.
+  @param[in] PassThru       A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+  @param[in] Slot           The slot number of the SD card to send the command to.
+
+  @retval EFI_SUCCESS       The operation is done correctly.
+  @retval Others            The operation fails.
+
+**/
+EFI_STATUS
+SdCardTuningClock (
+  IN EFI_PCI_IO_PROTOCOL                *PciIo,
+  IN EFI_SD_MMC_PASS_THRU_PROTOCOL      *PassThru,
+  IN UINT8                              Slot
+  )
+{
+  EFI_STATUS          Status;
+  UINT8               HostCtrl2;
+  UINT8               Retry;
+
+  //
+  // Notify the host that the sampling clock tuning procedure starts.
+  //
+  HostCtrl2 = BIT6;
+  Status = SdMmcHcOrMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL2, sizeof (HostCtrl2), &HostCtrl2);
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+  //
+  // Ask the device to send a sequence of tuning blocks till the tuning procedure is done.
+  //
+  Retry = 0;
+  do {
+    Status = SdCardSendTuningBlk (PassThru, Slot);
+    if (EFI_ERROR (Status)) {
+      DEBUG ((DEBUG_ERROR, "SdCardSendTuningBlk: Send tuning block fails with %r\n", Status));
+      return Status;
+    }
+
+    Status = SdMmcHcRwMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL2, TRUE, sizeof (HostCtrl2), &HostCtrl2);
+    if (EFI_ERROR (Status)) {
+      return Status;
+    }
+
+    if ((HostCtrl2 & (BIT6 | BIT7)) == 0) {
+      break;
+    }
+    if ((HostCtrl2 & (BIT6 | BIT7)) == BIT7) {
+      return EFI_SUCCESS;
+    }
+  } while (++Retry < 40);
+
+  DEBUG ((DEBUG_ERROR, "SdCardTuningClock: Send tuning block fails at %d times with HostCtrl2 %02x\n", Retry, HostCtrl2));
+  //
+  // Abort the tuning procedure and reset the tuning circuit.
+  //
+  HostCtrl2 = (UINT8)~(BIT6 | BIT7);
+  Status = SdMmcHcAndMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL2, sizeof (HostCtrl2), &HostCtrl2);
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+  return EFI_DEVICE_ERROR;
+}
+
+/**
+  Switch the bus width to specified width.
+
+  Refer to SD Physical Layer Simplified Spec 4.1 Section 4.7 and
+  SD Host Controller Simplified Spec 3.0 section Figure 3-7 for details.
+
+  @param[in] PciIo          A pointer to the EFI_PCI_IO_PROTOCOL instance.
+  @param[in] PassThru       A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+  @param[in] Slot           The slot number of the SD card to send the command to.
+  @param[in] Rca            The relative device address to be assigned.
+  @param[in] BusWidth       The bus width to be set, it could be 4 or 8.
+
+  @retval EFI_SUCCESS       The operation is done correctly.
+  @retval Others            The operation fails.
+
+**/
+EFI_STATUS
+SdCardSwitchBusWidth (
+  IN EFI_PCI_IO_PROTOCOL                *PciIo,
+  IN EFI_SD_MMC_PASS_THRU_PROTOCOL      *PassThru,
+  IN UINT8                              Slot,
+  IN UINT16                             Rca,
+  IN UINT8                              BusWidth
+  )
+{
+  EFI_STATUS          Status;
+  UINT32              DevStatus;
+
+  Status = SdCardSetBusWidth (PassThru, Slot, Rca, BusWidth);
+  if (EFI_ERROR (Status)) {
+    DEBUG ((DEBUG_ERROR, "SdCardSwitchBusWidth: Switch to bus width %d fails with %r\n", BusWidth, Status));
+    return Status;
+  }
+
+  Status = SdCardSendStatus (PassThru, Slot, Rca, &DevStatus);
+  if (EFI_ERROR (Status)) {
+    DEBUG ((DEBUG_ERROR, "SdCardSwitchBusWidth: Send status fails with %r\n", Status));
+    return Status;
+  }
+  //
+  // Check the switch operation is really successful or not.
+  //
+  if ((DevStatus >> 16) != 0) {
+    DEBUG ((DEBUG_ERROR, "SdCardSwitchBusWidth: The switch operation fails as DevStatus is 0x%08x\n", DevStatus));
+    return EFI_DEVICE_ERROR;
+  }
+
+  Status = SdMmcHcSetBusWidth (PciIo, Slot, BusWidth);
+
+  return Status;
+}
+
+/**
+  Switch the high speed timing according to request.
+
+  Refer to SD Physical Layer Simplified Spec 4.1 Section 4.7 and
+  SD Host Controller Simplified Spec 3.0 section Figure 2-29 for details.
+
+  @param[in] PciIo          A pointer to the EFI_PCI_IO_PROTOCOL instance.
+  @param[in] PassThru       A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+  @param[in] Slot           The slot number of the SD card to send the command to.
+  @param[in] Rca            The relative device address to be assigned.
+  @param[in] S18A           The boolean to show if it's a UHS-I SD card.
+
+  @retval EFI_SUCCESS       The operation is done correctly.
+  @retval Others            The operation fails.
+
+**/
+EFI_STATUS
+SdCardSetBusMode (
+  IN EFI_PCI_IO_PROTOCOL                *PciIo,
+  IN EFI_SD_MMC_PASS_THRU_PROTOCOL      *PassThru,
+  IN UINT8                              Slot,
+  IN UINT16                             Rca,
+  IN BOOLEAN                            S18A
+  )
+{
+  EFI_STATUS                   Status;
+  SD_MMC_HC_SLOT_CAP           *Capability;
+  UINT32                       ClockFreq;
+  UINT8                        BusWidth;
+  UINT8                        AccessMode;
+  UINT8                        HostCtrl1;
+  UINT8                        HostCtrl2;
+  UINT8                        SwitchResp[64];
+  SD_MMC_HC_PRIVATE_DATA       *Private;
+
+  Private = SD_MMC_HC_PRIVATE_FROM_THIS (PassThru);
+
+  Capability = &Private->Capability[Slot];
+
+  Status = SdCardSelect (PassThru, Slot, Rca);
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+
+  BusWidth = 4;
+
+  Status = SdCardSwitchBusWidth (PciIo, PassThru, Slot, Rca, BusWidth);
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+  //
+  // Get the supported bus speed from SWITCH cmd return data group #1.
+  //
+  Status = SdCardSwitch (PassThru, Slot, 0xF, 0xF, 0xF, 0xF, FALSE, SwitchResp);
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+  //
+  // Calculate supported bus speed/bus width/clock frequency by host and device capability.
+  //
+  ClockFreq = 0;
+  if (S18A && (Capability->Sdr104 != 0) && ((SwitchResp[13] & BIT3) != 0)) {
+    ClockFreq = 208;
+    AccessMode = 3;
+  } else if (S18A && (Capability->Sdr50 != 0) && ((SwitchResp[13] & BIT2) != 0)) {
+    ClockFreq = 100;
+    AccessMode = 2;
+  } else if (S18A && (Capability->Ddr50 != 0) && ((SwitchResp[13] & BIT4) != 0)) {
+    ClockFreq = 50;
+    AccessMode = 4;
+  } else if ((SwitchResp[13] & BIT1) != 0) {
+    ClockFreq = 50;
+    AccessMode = 1;
+  } else {
+    ClockFreq = 25;
+    AccessMode = 0;
+  }
+
+  Status = SdCardSwitch (PassThru, Slot, AccessMode, 0xF, 0xF, 0xF, TRUE, SwitchResp);
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+
+  if ((SwitchResp[16] & 0xF) != AccessMode) {
+    DEBUG ((DEBUG_ERROR, "SdCardSetBusMode: Switch to AccessMode %d ClockFreq %d BusWidth %d fails! The Switch response is 0x%1x\n", AccessMode, ClockFreq, BusWidth, SwitchResp[16] & 0xF));
+    return EFI_DEVICE_ERROR;
+  }
+
+  DEBUG ((DEBUG_INFO, "SdCardSetBusMode: Switch to AccessMode %d ClockFreq %d BusWidth %d\n", AccessMode, ClockFreq, BusWidth));
+
+  //
+  // Set to Hight Speed timing
+  //
+  if (AccessMode == 1) {
+    HostCtrl1 = BIT2;
+    Status = SdMmcHcOrMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL1, sizeof (HostCtrl1), &HostCtrl1);
+    if (EFI_ERROR (Status)) {
+      return Status;
+    }
+  }
+
+  HostCtrl2 = (UINT8)~0x7;
+  Status = SdMmcHcAndMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL2, sizeof (HostCtrl2), &HostCtrl2);
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+  HostCtrl2 = AccessMode;
+  Status = SdMmcHcOrMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL2, sizeof (HostCtrl2), &HostCtrl2);
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+
+  Status = SdMmcHcClockSupply (PciIo, Slot, ClockFreq * 1000, *Capability);
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+
+  if ((AccessMode == 3) || ((AccessMode == 2) && (Capability->TuningSDR50 != 0))) {
+    Status = SdCardTuningClock (PciIo, PassThru, Slot);
+    if (EFI_ERROR (Status)) {
+      return Status;
+    }
+  }
+
+  return Status;
+}
+
+/**
+  Execute SD device identification procedure.
+
+  Refer to SD Physical Layer Simplified Spec 4.1 Section 3.6 for details.
+
+  @param[in] Private        A pointer to the SD_MMC_HC_PRIVATE_DATA instance.
+  @param[in] Slot           The slot number of the SD card to send the command to.
+
+  @retval EFI_SUCCESS       There is a SD card.
+  @retval Others            There is not a SD card.
+
+**/
+EFI_STATUS
+SdCardIdentification (
+  IN SD_MMC_HC_PRIVATE_DATA             *Private,
+  IN UINT8                              Slot
+  )
+{
+  EFI_STATUS                     Status;
+  EFI_PCI_IO_PROTOCOL            *PciIo;
+  EFI_SD_MMC_PASS_THRU_PROTOCOL  *PassThru;
+  UINT32                         Ocr;
+  UINT16                         Rca;
+  BOOLEAN                        Xpc;
+  BOOLEAN                        S18r;
+  UINT64                         MaxCurrent;
+  UINT16                         ControllerVer;
+  UINT8                          PowerCtrl;
+  UINT32                         PresentState;
+  UINT8                          HostCtrl2;
+
+  PciIo    = Private->PciIo;
+  PassThru = &Private->PassThru;
+  //
+  // 1. Send Cmd0 to the device
+  //
+  Status = SdCardReset (PassThru, Slot);
+  if (EFI_ERROR (Status)) {
+    DEBUG ((DEBUG_INFO, "SdCardIdentification: Executing Cmd0 fails with %r\n", Status));
+    return Status;
+  }
+  //
+  // 2. Send Cmd8 to the device
+  //
+  Status = SdCardVoltageCheck (PassThru, Slot, 0x1, 0xFF);
+  if (EFI_ERROR (Status)) {
+    DEBUG ((DEBUG_INFO, "SdCardIdentification: Executing Cmd8 fails with %r\n", Status));
+    return Status;
+  }
+  //
+  // 3. Send SDIO Cmd5 to the device to the SDIO device OCR register.
+  //
+  Status = SdioSendOpCond (PassThru, Slot, 0, FALSE);
+  if (!EFI_ERROR (Status)) {
+    DEBUG ((DEBUG_INFO, "SdCardIdentification: Found SDIO device, ignore it as we don't support\n"));
+    return EFI_DEVICE_ERROR;
+  }
+  //
+  // 4. Send Acmd41 with voltage window 0 to the device
+  //
+  Status = SdCardSendOpCond (PassThru, Slot, 0, 0, FALSE, FALSE, FALSE, &Ocr);
+  if (EFI_ERROR (Status)) {
+    DEBUG ((DEBUG_INFO, "SdCardIdentification: Executing SdCardSendOpCond fails with %r\n", Status));
+    return EFI_DEVICE_ERROR;
+  }
+
+  if (Private->Capability[Slot].Voltage33 != 0) {
+    //
+    // Support 3.3V
+    //
+    MaxCurrent = ((UINT32)Private->MaxCurrent[Slot] & 0xFF) * 4;
+  } else if (Private->Capability[Slot].Voltage30 != 0) {
+    //
+    // Support 3.0V
+    //
+    MaxCurrent = (((UINT32)Private->MaxCurrent[Slot] >> 8) & 0xFF) * 4;
+  } else if (Private->Capability[Slot].Voltage18 != 0) {
+    //
+    // Support 1.8V
+    //
+    MaxCurrent = (((UINT32)Private->MaxCurrent[Slot] >> 16) & 0xFF) * 4;
+  } else {
+    ASSERT (FALSE);
+    return EFI_DEVICE_ERROR;
+  }
+
+  if (MaxCurrent >= 150) {
+    Xpc = TRUE;
+  } else {
+    Xpc = FALSE;
+  }
+
+  Status = SdMmcHcRwMmio (PciIo, Slot, SD_MMC_HC_CTRL_VER, TRUE, sizeof (ControllerVer), &ControllerVer);
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+
+  if ((ControllerVer & 0xFF) == 2) {
+    S18r = TRUE;
+  } else if (((ControllerVer & 0xFF) == 0) || ((ControllerVer & 0xFF) == 1)) {
+    S18r = FALSE;
+  } else {
+    ASSERT (FALSE);
+    return EFI_UNSUPPORTED;
+  }
+  //
+  // 5. Repeatly send Acmd41 with supply voltage window to the device.
+  //    Note here we only support the cards complied with SD physical
+  //    layer simplified spec version 2.0 and version 3.0 and above.
+  //
+  do {
+    Status = SdCardSendOpCond (PassThru, Slot, 0, Ocr, S18r, Xpc, TRUE, &Ocr);
+    if (EFI_ERROR (Status)) {
+      DEBUG ((DEBUG_ERROR, "SdCardIdentification: SdCardSendOpCond fails with %r Ocr %x, S18r %x, Xpc %x\n", Status, Ocr, S18r, Xpc));
+      return EFI_DEVICE_ERROR;
+    }
+  } while ((Ocr & BIT31) == 0);
+
+  //
+  // 6. If the S18A bit is set and the Host Controller supports 1.8V signaling
+  //    (One of support bits is set to 1: SDR50, SDR104 or DDR50 in the
+  //    Capabilities register), switch its voltage to 1.8V.
+  //
+  if ((Private->Capability[Slot].Sdr50 != 0 ||
+       Private->Capability[Slot].Sdr104 != 0 ||
+       Private->Capability[Slot].Ddr50 != 0) &&
+       ((Ocr & BIT24) != 0)) {
+    Status = SdCardVoltageSwitch (PassThru, Slot);
+    if (EFI_ERROR (Status)) {
+      DEBUG ((DEBUG_ERROR, "SdCardIdentification: Executing SdCardVoltageSwitch fails with %r\n", Status));
+      Status = EFI_DEVICE_ERROR;
+      goto Error;
+    } else {
+      Status = SdMmcHcStopClock (PciIo, Slot);
+      if (EFI_ERROR (Status)) {
+        Status = EFI_DEVICE_ERROR;
+        goto Error;
+      }
+
+      SdMmcHcRwMmio (PciIo, Slot, SD_MMC_HC_PRESENT_STATE, TRUE, sizeof (PresentState), &PresentState);
+      if (((PresentState >> 20) & 0xF) != 0) {
+        DEBUG ((DEBUG_ERROR, "SdCardIdentification: SwitchVoltage fails with PresentState = 0x%x\n", PresentState));
+        Status = EFI_DEVICE_ERROR;
+        goto Error;
+      }
+      HostCtrl2  = BIT3;
+      SdMmcHcOrMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL2, sizeof (HostCtrl2), &HostCtrl2);
+
+      gBS->Stall (5000);
+
+      SdMmcHcRwMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL2, TRUE, sizeof (HostCtrl2), &HostCtrl2);
+      if ((HostCtrl2 & BIT3) == 0) {
+        DEBUG ((DEBUG_ERROR, "SdCardIdentification: SwitchVoltage fails with HostCtrl2 = 0x%x\n", HostCtrl2));
+        Status = EFI_DEVICE_ERROR;
+        goto Error;
+      }
+
+      SdMmcHcInitClockFreq (PciIo, Slot, Private->Capability[Slot]);
+
+      gBS->Stall (1000);
+
+      SdMmcHcRwMmio (PciIo, Slot, SD_MMC_HC_PRESENT_STATE, TRUE, sizeof (PresentState), &PresentState);
+      if (((PresentState >> 20) & 0xF) != 0xF) {
+        DEBUG ((DEBUG_ERROR, "SdCardIdentification: SwitchVoltage fails with PresentState = 0x%x, It should be 0xF\n", PresentState));
+        Status = EFI_DEVICE_ERROR;
+        goto Error;
+      }
+    }
+    DEBUG ((DEBUG_INFO, "SdCardIdentification: Switch to 1.8v signal voltage success\n"));
+  }
+
+  Status = SdCardAllSendCid (PassThru, Slot);
+  if (EFI_ERROR (Status)) {
+    DEBUG ((DEBUG_ERROR, "SdCardIdentification: Executing SdCardAllSendCid fails with %r\n", Status));
+    return Status;
+  }
+
+  Status = SdCardSetRca (PassThru, Slot, &Rca);
+  if (EFI_ERROR (Status)) {
+    DEBUG ((DEBUG_ERROR, "SdCardIdentification: Executing SdCardSetRca fails with %r\n", Status));
+    return Status;
+  }
+  //
+  // Enter Data Tranfer Mode.
+  //
+  DEBUG ((DEBUG_INFO, "SdCardIdentification: Found a SD device at slot [%d]\n", Slot));
+  Private->Slot[Slot].CardType = SdCardType;
+
+  Status = SdCardSetBusMode (PciIo, PassThru, Slot, Rca, ((Ocr & BIT24) != 0));
+
+  return Status;
+
+Error:
+  //
+  // Set SD Bus Power = 0
+  //
+  PowerCtrl = (UINT8)~BIT0;
+  Status = SdMmcHcAndMmio (PciIo, Slot, SD_MMC_HC_POWER_CTRL, sizeof (PowerCtrl), &PowerCtrl);
+  return EFI_DEVICE_ERROR;
+}
+
diff --git a/Drivers/SdMmc/Xenon/MvSdMmcPciHcDxe.c b/Drivers/SdMmc/Xenon/MvSdMmcPciHcDxe.c
new file mode 100644
index 0000000..4c1b5c8
--- /dev/null
+++ b/Drivers/SdMmc/Xenon/MvSdMmcPciHcDxe.c
@@ -0,0 +1,1316 @@
+/** @file
+  This driver is used to manage SD/MMC PCI host controllers which are compliance
+  with SD Host Controller Simplified Specification version 3.00.
+
+  It would expose EFI_SD_MMC_PASS_THRU_PROTOCOL for upper layer use.
+
+  Copyright (c) 2015 - 2016, Intel Corporation. All rights reserved.<BR>
+  This program and the accompanying materials
+  are licensed and made available under the terms and conditions of the BSD License
+  which accompanies this distribution.  The full text of the license may be found at
+  http://opensource.org/licenses/bsd-license.php
+
+  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "SdMmcPciHcDxe.h"
+
+//
+// Driver Global Variables
+//
+EFI_DRIVER_BINDING_PROTOCOL gSdMmcPciHcDriverBinding = {
+  SdMmcPciHcDriverBindingSupported,
+  SdMmcPciHcDriverBindingStart,
+  SdMmcPciHcDriverBindingStop,
+  0x10,
+  NULL,
+  NULL
+};
+
+//
+// Template for SD/MMC host controller private data.
+//
+SD_MMC_HC_PRIVATE_DATA gSdMmcPciHcTemplate = {
+  SD_MMC_HC_PRIVATE_SIGNATURE,      // Signature
+  NULL,                             // ControllerHandle
+  NULL,                             // PciIo
+  {                                 // PassThru
+    sizeof (UINT32),
+    SdMmcPassThruPassThru,
+    SdMmcPassThruGetNextSlot,
+    SdMmcPassThruBuildDevicePath,
+    SdMmcPassThruGetSlotNumber,
+    SdMmcPassThruResetDevice
+  },
+  0,                                // PciAttributes
+  0,                                // PreviousSlot
+  NULL,                             // TimerEvent
+  NULL,                             // ConnectEvent
+                                    // Queue
+  INITIALIZE_LIST_HEAD_VARIABLE (gSdMmcPciHcTemplate.Queue),
+  {                                 // Slot
+    {0, UnknownSlot, 0, 0, 0}, {0, UnknownSlot, 0, 0, 0}, {0, UnknownSlot, 0, 0, 0},
+    {0, UnknownSlot, 0, 0, 0}, {0, UnknownSlot, 0, 0, 0}, {0, UnknownSlot, 0, 0, 0}
+  },
+  {                                 // Capability
+    {0},
+  },
+  {                                 // MaxCurrent
+    0,
+  },
+  0                                 // ControllerVersion
+};
+
+SD_DEVICE_PATH    mSdDpTemplate = {
+  {
+    MESSAGING_DEVICE_PATH,
+    MSG_SD_DP,
+    {
+      (UINT8) (sizeof (SD_DEVICE_PATH)),
+      (UINT8) ((sizeof (SD_DEVICE_PATH)) >> 8)
+    }
+  },
+  0
+};
+
+EMMC_DEVICE_PATH    mEmmcDpTemplate = {
+  {
+    MESSAGING_DEVICE_PATH,
+    MSG_EMMC_DP,
+    {
+      (UINT8) (sizeof (EMMC_DEVICE_PATH)),
+      (UINT8) ((sizeof (EMMC_DEVICE_PATH)) >> 8)
+    }
+  },
+  0
+};
+
+//
+// Prioritized function list to detect card type.
+// User could add other card detection logic here.
+//
+CARD_TYPE_DETECT_ROUTINE mCardTypeDetectRoutineTable[] = {
+  EmmcIdentification,
+  SdCardIdentification,
+  NULL
+};
+
+/**
+  The entry point for SD host controller driver, used to install this driver on the ImageHandle.
+
+  @param[in]  ImageHandle   The firmware allocated handle for this driver image.
+  @param[in]  SystemTable   Pointer to the EFI system table.
+
+  @retval EFI_SUCCESS   Driver loaded.
+  @retval other         Driver not loaded.
+
+**/
+EFI_STATUS
+EFIAPI
+InitializeSdMmcPciHcDxe (
+  IN EFI_HANDLE        ImageHandle,
+  IN EFI_SYSTEM_TABLE  *SystemTable
+  )
+{
+  EFI_STATUS           Status;
+
+  Status = EfiLibInstallDriverBindingComponentName2 (
+             ImageHandle,
+             SystemTable,
+             &gSdMmcPciHcDriverBinding,
+             ImageHandle,
+             &gSdMmcPciHcComponentName,
+             &gSdMmcPciHcComponentName2
+             );
+  ASSERT_EFI_ERROR (Status);
+
+  return Status;
+}
+
+/**
+  Call back function when the timer event is signaled.
+
+  @param[in]  Event     The Event this notify function registered to.
+  @param[in]  Context   Pointer to the context data registered to the
+                        Event.
+
+**/
+VOID
+EFIAPI
+ProcessAsyncTaskList (
+  IN EFI_EVENT          Event,
+  IN VOID*              Context
+  )
+{
+  SD_MMC_HC_PRIVATE_DATA              *Private;
+  LIST_ENTRY                          *Link;
+  SD_MMC_HC_TRB                       *Trb;
+  EFI_STATUS                          Status;
+  EFI_SD_MMC_PASS_THRU_COMMAND_PACKET *Packet;
+  BOOLEAN                             InfiniteWait;
+  EFI_EVENT                           TrbEvent;
+
+  Private = (SD_MMC_HC_PRIVATE_DATA*)Context;
+
+  //
+  // Check if the first entry in the async I/O queue is done or not.
+  //
+  Status = EFI_SUCCESS;
+  Trb    = NULL;
+  Link   = GetFirstNode (&Private->Queue);
+  if (!IsNull (&Private->Queue, Link)) {
+    Trb = SD_MMC_HC_TRB_FROM_THIS (Link);
+    if (!Private->Slot[Trb->Slot].MediaPresent) {
+      Status = EFI_NO_MEDIA;
+      goto Done;
+    }
+    if (!Trb->Started) {
+      //
+      // Check whether the cmd/data line is ready for transfer.
+      //
+      Status = SdMmcCheckTrbEnv (Private, Trb);
+      if (!EFI_ERROR (Status)) {
+        Trb->Started = TRUE;
+        Status = SdMmcExecTrb (Private, Trb);
+        if (EFI_ERROR (Status)) {
+          goto Done;
+        }
+      } else {
+        goto Done;
+      }
+    }
+    Status = SdMmcCheckTrbResult (Private, Trb);
+  }
+
+Done:
+  if ((Trb != NULL) && (Status == EFI_NOT_READY)) {
+    Packet = Trb->Packet;
+    if (Packet->Timeout == 0) {
+      InfiniteWait = TRUE;
+    } else {
+      InfiniteWait = FALSE;
+    }
+    if ((!InfiniteWait) && (Trb->Timeout-- == 0)) {
+      RemoveEntryList (Link);
+      Trb->Packet->TransactionStatus = EFI_TIMEOUT;
+      TrbEvent = Trb->Event;
+      SdMmcFreeTrb (Trb);
+      DEBUG ((DEBUG_VERBOSE, "ProcessAsyncTaskList(): Signal Event %p EFI_TIMEOUT\n", TrbEvent));
+      gBS->SignalEvent (TrbEvent);
+      return;
+    }
+  }
+  if ((Trb != NULL) && (Status != EFI_NOT_READY)) {
+    RemoveEntryList (Link);
+    Trb->Packet->TransactionStatus = Status;
+    TrbEvent = Trb->Event;
+    SdMmcFreeTrb (Trb);
+    DEBUG ((DEBUG_VERBOSE, "ProcessAsyncTaskList(): Signal Event %p with %r\n", TrbEvent, Status));
+    gBS->SignalEvent (TrbEvent);
+  }
+  return;
+}
+
+/**
+  Sd removable device enumeration callback function when the timer event is signaled.
+
+  @param[in]  Event     The Event this notify function registered to.
+  @param[in]  Context   Pointer to the context data registered to the
+                        Event.
+
+**/
+VOID
+EFIAPI
+SdMmcPciHcEnumerateDevice (
+  IN EFI_EVENT          Event,
+  IN VOID*              Context
+  )
+{
+  SD_MMC_HC_PRIVATE_DATA              *Private;
+  EFI_STATUS                          Status;
+  UINT8                               Slot;
+  BOOLEAN                             MediaPresent;
+  UINT32                              RoutineNum;
+  CARD_TYPE_DETECT_ROUTINE            *Routine;
+  UINTN                               Index;
+  LIST_ENTRY                          *Link;
+  LIST_ENTRY                          *NextLink;
+  SD_MMC_HC_TRB                       *Trb;
+  EFI_TPL                             OldTpl;
+
+  Private = (SD_MMC_HC_PRIVATE_DATA*)Context;
+
+  for (Slot = 0; Slot < SD_MMC_HC_MAX_SLOT; Slot++) {
+    if ((Private->Slot[Slot].Enable) && (Private->Slot[Slot].SlotType == RemovableSlot)) {
+      Status = SdMmcHcCardDetect (Private->PciIo, Slot, &MediaPresent);
+      if ((Status == EFI_MEDIA_CHANGED) && !MediaPresent) {
+        DEBUG ((DEBUG_INFO, "SdMmcPciHcEnumerateDevice: device disconnected at slot %d of pci %p\n", Slot, Private->PciIo));
+        Private->Slot[Slot].MediaPresent = FALSE;
+        Private->Slot[Slot].Initialized  = FALSE;
+        //
+        // Signal all async task events at the slot with EFI_NO_MEDIA status.
+        //
+        OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
+        for (Link = GetFirstNode (&Private->Queue);
+             !IsNull (&Private->Queue, Link);
+             Link = NextLink) {
+          NextLink = GetNextNode (&Private->Queue, Link);
+          Trb = SD_MMC_HC_TRB_FROM_THIS (Link);
+          if (Trb->Slot == Slot) {
+            RemoveEntryList (Link);
+            Trb->Packet->TransactionStatus = EFI_NO_MEDIA;
+            gBS->SignalEvent (Trb->Event);
+            SdMmcFreeTrb (Trb);
+          }
+        }
+        gBS->RestoreTPL (OldTpl);
+        //
+        // Notify the upper layer the connect state change through ReinstallProtocolInterface.
+        //
+        gBS->ReinstallProtocolInterface (
+              Private->ControllerHandle,
+              &gEfiSdMmcPassThruProtocolGuid,
+              &Private->PassThru,
+              &Private->PassThru
+              );
+      }
+      if ((Status == EFI_MEDIA_CHANGED) && MediaPresent) {
+        DEBUG ((DEBUG_INFO, "SdMmcPciHcEnumerateDevice: device connected at slot %d of pci %p\n", Slot, Private->PciIo));
+        //
+        // Reset the specified slot of the SD/MMC Pci Host Controller
+        //
+        Status = SdMmcHcReset (Private->PciIo, Slot);
+        if (EFI_ERROR (Status)) {
+          continue;
+        }
+        //
+        // Reinitialize slot and restart identification process for the new attached device
+        //
+        Status = SdMmcHcInitHost (Private->PciIo, Slot, Private->Capability[Slot]);
+        if (EFI_ERROR (Status)) {
+          continue;
+        }
+
+        Private->Slot[Slot].MediaPresent = TRUE;
+        Private->Slot[Slot].Initialized  = TRUE;
+        RoutineNum = sizeof (mCardTypeDetectRoutineTable) / sizeof (CARD_TYPE_DETECT_ROUTINE);
+        for (Index = 0; Index < RoutineNum; Index++) {
+          Routine = &mCardTypeDetectRoutineTable[Index];
+          if (*Routine != NULL) {
+            Status = (*Routine) (Private, Slot);
+            if (!EFI_ERROR (Status)) {
+              break;
+            }
+          }
+        }
+        //
+        // This card doesn't get initialized correctly.
+        //
+        if (Index == RoutineNum) {
+          Private->Slot[Slot].Initialized = FALSE;
+        }
+
+        //
+        // Notify the upper layer the connect state change through ReinstallProtocolInterface.
+        //
+        gBS->ReinstallProtocolInterface (
+               Private->ControllerHandle,
+               &gEfiSdMmcPassThruProtocolGuid,
+               &Private->PassThru,
+               &Private->PassThru
+               );
+      }
+    }
+  }
+
+  return;
+}
+/**
+  Tests to see if this driver supports a given controller. If a child device is provided,
+  it further tests to see if this driver supports creating a handle for the specified child device.
+
+  This function checks to see if the driver specified by This supports the device specified by
+  ControllerHandle. Drivers will typically use the device path attached to
+  ControllerHandle and/or the services from the bus I/O abstraction attached to
+  ControllerHandle to determine if the driver supports ControllerHandle. This function
+  may be called many times during platform initialization. In order to reduce boot times, the tests
+  performed by this function must be very small, and take as little time as possible to execute. This
+  function must not change the state of any hardware devices, and this function must be aware that the
+  device specified by ControllerHandle may already be managed by the same driver or a
+  different driver. This function must match its calls to AllocatePages() with FreePages(),
+  AllocatePool() with FreePool(), and OpenProtocol() with CloseProtocol().
+  Since ControllerHandle may have been previously started by the same driver, if a protocol is
+  already in the opened state, then it must not be closed with CloseProtocol(). This is required
+  to guarantee the state of ControllerHandle is not modified by this function.
+
+  @param[in]  This                 A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
+  @param[in]  ControllerHandle     The handle of the controller to test. This handle
+                                   must support a protocol interface that supplies
+                                   an I/O abstraction to the driver.
+  @param[in]  RemainingDevicePath  A pointer to the remaining portion of a device path.  This
+                                   parameter is ignored by device drivers, and is optional for bus
+                                   drivers. For bus drivers, if this parameter is not NULL, then
+                                   the bus driver must determine if the bus controller specified
+                                   by ControllerHandle and the child controller specified
+                                   by RemainingDevicePath are both supported by this
+                                   bus driver.
+
+  @retval EFI_SUCCESS              The device specified by ControllerHandle and
+                                   RemainingDevicePath is supported by the driver specified by This.
+  @retval EFI_ALREADY_STARTED      The device specified by ControllerHandle and
+                                   RemainingDevicePath is already being managed by the driver
+                                   specified by This.
+  @retval EFI_ACCESS_DENIED        The device specified by ControllerHandle and
+                                   RemainingDevicePath is already being managed by a different
+                                   driver or an application that requires exclusive access.
+                                   Currently not implemented.
+  @retval EFI_UNSUPPORTED          The device specified by ControllerHandle and
+                                   RemainingDevicePath is not supported by the driver specified by This.
+**/
+EFI_STATUS
+EFIAPI
+SdMmcPciHcDriverBindingSupported (
+  IN EFI_DRIVER_BINDING_PROTOCOL *This,
+  IN EFI_HANDLE                  Controller,
+  IN EFI_DEVICE_PATH_PROTOCOL    *RemainingDevicePath
+  )
+{
+  EFI_STATUS                Status;
+  EFI_DEVICE_PATH_PROTOCOL  *ParentDevicePath;
+  EFI_PCI_IO_PROTOCOL       *PciIo;
+  PCI_TYPE00                PciData;
+
+  PciIo            = NULL;
+  ParentDevicePath = NULL;
+
+  //
+  // SdPciHcDxe is a device driver, and should ingore the
+  // "RemainingDevicePath" according to EFI spec.
+  //
+  Status = gBS->OpenProtocol (
+                  Controller,
+                  &gEfiDevicePathProtocolGuid,
+                  (VOID *) &ParentDevicePath,
+                  This->DriverBindingHandle,
+                  Controller,
+                  EFI_OPEN_PROTOCOL_BY_DRIVER
+                  );
+  if (EFI_ERROR (Status)) {
+    //
+    // EFI_ALREADY_STARTED is also an error.
+    //
+    return Status;
+  }
+  //
+  // Close the protocol because we don't use it here.
+  //
+  gBS->CloseProtocol (
+        Controller,
+        &gEfiDevicePathProtocolGuid,
+        This->DriverBindingHandle,
+        Controller
+        );
+
+  //
+  // Now test the EfiPciIoProtocol.
+  //
+  Status = gBS->OpenProtocol (
+                  Controller,
+                  &gEfiPciIoProtocolGuid,
+                  (VOID **) &PciIo,
+                  This->DriverBindingHandle,
+                  Controller,
+                  EFI_OPEN_PROTOCOL_BY_DRIVER
+                  );
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+
+  //
+  // Now further check the PCI header: Base class (offset 0x08) and
+  // Sub Class (offset 0x05). This controller should be an SD/MMC PCI
+  // Host Controller.
+  //
+  Status = PciIo->Pci.Read (
+                        PciIo,
+                        EfiPciIoWidthUint8,
+                        0,
+                        sizeof (PciData),
+                        &PciData
+                        );
+  if (EFI_ERROR (Status)) {
+    gBS->CloseProtocol (
+          Controller,
+          &gEfiPciIoProtocolGuid,
+          This->DriverBindingHandle,
+          Controller
+          );
+    return EFI_UNSUPPORTED;
+  }
+  //
+  // Since we already got the PciData, we can close protocol to avoid to carry it
+  // on for multiple exit points.
+  //
+  gBS->CloseProtocol (
+        Controller,
+        &gEfiPciIoProtocolGuid,
+        This->DriverBindingHandle,
+        Controller
+        );
+
+  //
+  // Examine SD PCI Host Controller PCI Configuration table fields.
+  //
+  if ((PciData.Hdr.ClassCode[2] == PCI_CLASS_SYSTEM_PERIPHERAL) &&
+      (PciData.Hdr.ClassCode[1] == PCI_SUBCLASS_SD_HOST_CONTROLLER) &&
+      ((PciData.Hdr.ClassCode[0] == 0x00) || (PciData.Hdr.ClassCode[0] == 0x01))) {
+    return EFI_SUCCESS;
+  }
+
+  return EFI_UNSUPPORTED;
+}
+
+/**
+  Starts a device controller or a bus controller.
+
+  The Start() function is designed to be invoked from the EFI boot service ConnectController().
+  As a result, much of the error checking on the parameters to Start() has been moved into this
+  common boot service. It is legal to call Start() from other locations,
+  but the following calling restrictions must be followed or the system behavior will not be deterministic.
+  1. ControllerHandle must be a valid EFI_HANDLE.
+  2. If RemainingDevicePath is not NULL, then it must be a pointer to a naturally aligned
+     EFI_DEVICE_PATH_PROTOCOL.
+  3. Prior to calling Start(), the Supported() function for the driver specified by This must
+     have been called with the same calling parameters, and Supported() must have returned EFI_SUCCESS.
+
+  @param[in]  This                 A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
+  @param[in]  ControllerHandle     The handle of the controller to start. This handle
+                                   must support a protocol interface that supplies
+                                   an I/O abstraction to the driver.
+  @param[in]  RemainingDevicePath  A pointer to the remaining portion of a device path.  This
+                                   parameter is ignored by device drivers, and is optional for bus
+                                   drivers. For a bus driver, if this parameter is NULL, then handles
+                                   for all the children of Controller are created by this driver.
+                                   If this parameter is not NULL and the first Device Path Node is
+                                   not the End of Device Path Node, then only the handle for the
+                                   child device specified by the first Device Path Node of
+                                   RemainingDevicePath is created by this driver.
+                                   If the first Device Path Node of RemainingDevicePath is
+                                   the End of Device Path Node, no child handle is created by this
+                                   driver.
+
+  @retval EFI_SUCCESS              The device was started.
+  @retval EFI_DEVICE_ERROR         The device could not be started due to a device error.Currently not implemented.
+  @retval EFI_OUT_OF_RESOURCES     The request could not be completed due to a lack of resources.
+  @retval Others                   The driver failded to start the device.
+
+**/
+EFI_STATUS
+EFIAPI
+SdMmcPciHcDriverBindingStart (
+  IN EFI_DRIVER_BINDING_PROTOCOL     *This,
+  IN EFI_HANDLE                      Controller,
+  IN EFI_DEVICE_PATH_PROTOCOL        *RemainingDevicePath
+  )
+{
+  EFI_STATUS                      Status;
+  SD_MMC_HC_PRIVATE_DATA          *Private;
+  EFI_PCI_IO_PROTOCOL             *PciIo;
+  UINT64                          Supports;
+  UINT64                          PciAttributes;
+  UINT8                           SlotNum;
+  UINT8                           FirstBar;
+  UINT8                           Slot;
+  UINT8                           Index;
+  CARD_TYPE_DETECT_ROUTINE        *Routine;
+  UINT32                          RoutineNum;
+  BOOLEAN                         MediaPresent;
+  BOOLEAN                         Support64BitDma;
+
+  DEBUG ((DEBUG_INFO, "SdMmcPciHcDriverBindingStart: Start\n"));
+
+  //
+  // Open PCI I/O Protocol and save pointer to open protocol
+  // in private data area.
+  //
+  PciIo  = NULL;
+  Status = gBS->OpenProtocol (
+                  Controller,
+                  &gEfiPciIoProtocolGuid,
+                  (VOID **) &PciIo,
+                  This->DriverBindingHandle,
+                  Controller,
+                  EFI_OPEN_PROTOCOL_BY_DRIVER
+                  );
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+
+  //
+  // Enable the SD Host Controller MMIO space
+  //
+  Private = NULL;
+  Status  = PciIo->Attributes (
+                     PciIo,
+                     EfiPciIoAttributeOperationGet,
+                     0,
+                     &PciAttributes
+                     );
+
+  if (EFI_ERROR (Status)) {
+    goto Done;
+  }
+
+  Status = PciIo->Attributes (
+                    PciIo,
+                    EfiPciIoAttributeOperationSupported,
+                    0,
+                    &Supports
+                    );
+
+  if (!EFI_ERROR (Status)) {
+    Supports &= (UINT64)EFI_PCI_DEVICE_ENABLE;
+    Status    = PciIo->Attributes (
+                         PciIo,
+                         EfiPciIoAttributeOperationEnable,
+                         Supports,
+                         NULL
+                         );
+  } else {
+    goto Done;
+  }
+
+  Private = AllocateCopyPool (sizeof (SD_MMC_HC_PRIVATE_DATA), &gSdMmcPciHcTemplate);
+  if (Private == NULL) {
+    Status = EFI_OUT_OF_RESOURCES;
+    goto Done;
+  }
+
+  Private->ControllerHandle = Controller;
+  Private->PciIo            = PciIo;
+  Private->PciAttributes    = PciAttributes;
+  InitializeListHead (&Private->Queue);
+
+  //
+  // Get SD/MMC Pci Host Controller Slot info
+  //
+  Status = SdMmcHcGetSlotInfo (PciIo, &FirstBar, &SlotNum);
+  if (EFI_ERROR (Status)) {
+    goto Done;
+  }
+
+  Support64BitDma = TRUE;
+  for (Slot = FirstBar; Slot < (FirstBar + SlotNum); Slot++) {
+    Private->Slot[Slot].Enable = TRUE;
+
+    Status = SdMmcHcGetCapability (PciIo, Slot, &Private->Capability[Slot]);
+    if (EFI_ERROR (Status)) {
+      continue;
+    }
+    DumpCapabilityReg (Slot, &Private->Capability[Slot]);
+
+    Support64BitDma &= Private->Capability[Slot].SysBus64;
+
+    Status = SdMmcHcGetMaxCurrent (PciIo, Slot, &Private->MaxCurrent[Slot]);
+    if (EFI_ERROR (Status)) {
+      continue;
+    }
+
+    Private->Slot[Slot].SlotType = Private->Capability[Slot].SlotType;
+    if ((Private->Slot[Slot].SlotType != RemovableSlot) && (Private->Slot[Slot].SlotType != EmbeddedSlot)) {
+      DEBUG ((DEBUG_INFO, "SdMmcPciHcDxe doesn't support the slot type [%d]!!!\n", Private->Slot[Slot].SlotType));
+      continue;
+    }
+
+    //
+    // Reset the specified slot of the SD/MMC Pci Host Controller
+    //
+    Status = SdMmcHcReset (PciIo, Slot);
+    if (EFI_ERROR (Status)) {
+      continue;
+    }
+    //
+    // Check whether there is a SD/MMC card attached
+    //
+    Status = SdMmcHcCardDetect (PciIo, Slot, &MediaPresent);
+    if (EFI_ERROR (Status) && (Status != EFI_MEDIA_CHANGED)) {
+      continue;
+    } else if (!MediaPresent) {
+      DEBUG ((EFI_ERROR, "SdMmcHcCardDetect: No device attached in Slot[%d]!!!\n", Slot));
+      continue;
+    }
+
+    Status = SdMmcHcInitHost (PciIo, Slot, Private->Capability[Slot]);
+    if (EFI_ERROR (Status)) {
+      continue;
+    }
+
+    Private->Slot[Slot].MediaPresent = TRUE;
+    Private->Slot[Slot].Initialized  = TRUE;
+    RoutineNum = sizeof (mCardTypeDetectRoutineTable) / sizeof (CARD_TYPE_DETECT_ROUTINE);
+    for (Index = 0; Index < RoutineNum; Index++) {
+      Routine = &mCardTypeDetectRoutineTable[Index];
+      if (*Routine != NULL) {
+        Status = (*Routine) (Private, Slot);
+        if (!EFI_ERROR (Status)) {
+          break;
+        }
+      }
+    }
+    //
+    // This card doesn't get initialized correctly.
+    //
+    if (Index == RoutineNum) {
+      Private->Slot[Slot].Initialized = FALSE;
+    }
+  }
+
+  //
+  // Enable 64-bit DMA support in the PCI layer if this controller
+  // supports it.
+  //
+  if (Support64BitDma) {
+    Status = PciIo->Attributes (
+                      PciIo,
+                      EfiPciIoAttributeOperationEnable,
+                      EFI_PCI_IO_ATTRIBUTE_DUAL_ADDRESS_CYCLE,
+                      NULL
+                      );
+    if (EFI_ERROR (Status)) {
+      DEBUG ((DEBUG_WARN, "SdMmcPciHcDriverBindingStart: failed to enable 64-bit DMA (%r)\n", Status));
+    }
+  }
+
+  //
+  // Start the asynchronous I/O monitor
+  //
+  Status = gBS->CreateEvent (
+                  EVT_TIMER | EVT_NOTIFY_SIGNAL,
+                  TPL_NOTIFY,
+                  ProcessAsyncTaskList,
+                  Private,
+                  &Private->TimerEvent
+                  );
+  if (EFI_ERROR (Status)) {
+    goto Done;
+  }
+
+  Status = gBS->SetTimer (Private->TimerEvent, TimerPeriodic, SD_MMC_HC_ASYNC_TIMER);
+  if (EFI_ERROR (Status)) {
+    goto Done;
+  }
+
+  //
+  // Start the Sd removable device connection enumeration
+  //
+  Status = gBS->CreateEvent (
+                  EVT_TIMER | EVT_NOTIFY_SIGNAL,
+                  TPL_CALLBACK,
+                  SdMmcPciHcEnumerateDevice,
+                  Private,
+                  &Private->ConnectEvent
+                  );
+  if (EFI_ERROR (Status)) {
+    goto Done;
+  }
+
+  Status = gBS->SetTimer (Private->ConnectEvent, TimerPeriodic, SD_MMC_HC_ENUM_TIMER);
+  if (EFI_ERROR (Status)) {
+    goto Done;
+  }
+
+  Status = gBS->InstallMultipleProtocolInterfaces (
+                  &Controller,
+                  &gEfiSdMmcPassThruProtocolGuid,
+                  &(Private->PassThru),
+                  NULL
+                  );
+
+  DEBUG ((DEBUG_INFO, "SdMmcPciHcDriverBindingStart: %r End on %x\n", Status, Controller));
+
+Done:
+  if (EFI_ERROR (Status)) {
+    if ((Private != NULL) && (Private->PciAttributes != 0)) {
+      //
+      // Restore original PCI attributes
+      //
+      PciIo->Attributes (
+               PciIo,
+               EfiPciIoAttributeOperationSet,
+               Private->PciAttributes,
+               NULL
+               );
+    }
+    gBS->CloseProtocol (
+          Controller,
+          &gEfiPciIoProtocolGuid,
+          This->DriverBindingHandle,
+          Controller
+          );
+
+    if ((Private != NULL) && (Private->TimerEvent != NULL)) {
+      gBS->CloseEvent (Private->TimerEvent);
+    }
+
+    if ((Private != NULL) && (Private->ConnectEvent != NULL)) {
+      gBS->CloseEvent (Private->ConnectEvent);
+    }
+
+    if (Private != NULL) {
+      FreePool (Private);
+    }
+  }
+
+  return Status;
+}
+
+/**
+  Stops a device controller or a bus controller.
+
+  The Stop() function is designed to be invoked from the EFI boot service DisconnectController().
+  As a result, much of the error checking on the parameters to Stop() has been moved
+  into this common boot service. It is legal to call Stop() from other locations,
+  but the following calling restrictions must be followed or the system behavior will not be deterministic.
+  1. ControllerHandle must be a valid EFI_HANDLE that was used on a previous call to this
+     same driver's Start() function.
+  2. The first NumberOfChildren handles of ChildHandleBuffer must all be a valid
+     EFI_HANDLE. In addition, all of these handles must have been created in this driver's
+     Start() function, and the Start() function must have called OpenProtocol() on
+     ControllerHandle with an Attribute of EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER.
+
+  @param[in]  This              A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
+  @param[in]  ControllerHandle  A handle to the device being stopped. The handle must
+                                support a bus specific I/O protocol for the driver
+                                to use to stop the device.
+  @param[in]  NumberOfChildren  The number of child device handles in ChildHandleBuffer.
+  @param[in]  ChildHandleBuffer An array of child handles to be freed. May be NULL
+                                if NumberOfChildren is 0.
+
+  @retval EFI_SUCCESS           The device was stopped.
+  @retval EFI_DEVICE_ERROR      The device could not be stopped due to a device error.
+
+**/
+EFI_STATUS
+EFIAPI
+SdMmcPciHcDriverBindingStop (
+  IN  EFI_DRIVER_BINDING_PROTOCOL     *This,
+  IN  EFI_HANDLE                      Controller,
+  IN  UINTN                           NumberOfChildren,
+  IN  EFI_HANDLE                      *ChildHandleBuffer
+  )
+{
+  EFI_STATUS                          Status;
+  EFI_SD_MMC_PASS_THRU_PROTOCOL       *PassThru;
+  SD_MMC_HC_PRIVATE_DATA              *Private;
+  EFI_PCI_IO_PROTOCOL                 *PciIo;
+  LIST_ENTRY                          *Link;
+  LIST_ENTRY                          *NextLink;
+  SD_MMC_HC_TRB                       *Trb;
+
+  DEBUG ((DEBUG_INFO, "SdMmcPciHcDriverBindingStop: Start\n"));
+
+  Status = gBS->OpenProtocol (
+                  Controller,
+                  &gEfiSdMmcPassThruProtocolGuid,
+                  (VOID**) &PassThru,
+                  This->DriverBindingHandle,
+                  Controller,
+                  EFI_OPEN_PROTOCOL_GET_PROTOCOL
+                  );
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+
+  Private = SD_MMC_HC_PRIVATE_FROM_THIS (PassThru);
+  //
+  // Close Non-Blocking timer and free Task list.
+  //
+  if (Private->TimerEvent != NULL) {
+    gBS->CloseEvent (Private->TimerEvent);
+    Private->TimerEvent = NULL;
+  }
+  if (Private->ConnectEvent != NULL) {
+    gBS->CloseEvent (Private->ConnectEvent);
+    Private->ConnectEvent = NULL;
+  }
+  //
+  // As the timer is closed, there is no needs to use TPL lock to
+  // protect the critical region "queue".
+  //
+  for (Link = GetFirstNode (&Private->Queue);
+       !IsNull (&Private->Queue, Link);
+       Link = NextLink) {
+    NextLink = GetNextNode (&Private->Queue, Link);
+    RemoveEntryList (Link);
+    Trb = SD_MMC_HC_TRB_FROM_THIS (Link);
+    Trb->Packet->TransactionStatus = EFI_ABORTED;
+    gBS->SignalEvent (Trb->Event);
+    SdMmcFreeTrb (Trb);
+  }
+
+  //
+  // Uninstall Block I/O protocol from the device handle
+  //
+  Status = gBS->UninstallProtocolInterface (
+                  Controller,
+                  &gEfiSdMmcPassThruProtocolGuid,
+                  &(Private->PassThru)
+                  );
+
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+
+  gBS->CloseProtocol (
+         Controller,
+         &gEfiPciIoProtocolGuid,
+         This->DriverBindingHandle,
+         Controller
+         );
+  //
+  // Restore original PCI attributes
+  //
+  PciIo  = Private->PciIo;
+  Status = PciIo->Attributes (
+                    PciIo,
+                    EfiPciIoAttributeOperationSet,
+                    Private->PciAttributes,
+                    NULL
+                    );
+  ASSERT_EFI_ERROR (Status);
+
+  FreePool (Private);
+
+  DEBUG ((DEBUG_INFO, "SdMmcPciHcDriverBindingStop: End with %r\n", Status));
+
+  return Status;
+}
+
+/**
+  Sends SD command to an SD card that is attached to the SD controller.
+
+  The PassThru() function sends the SD command specified by Packet to the SD card
+  specified by Slot.
+
+  If Packet is successfully sent to the SD card, then EFI_SUCCESS is returned.
+
+  If a device error occurs while sending the Packet, then EFI_DEVICE_ERROR is returned.
+
+  If Slot is not in a valid range for the SD controller, then EFI_INVALID_PARAMETER
+  is returned.
+
+  If Packet defines a data command but both InDataBuffer and OutDataBuffer are NULL,
+  EFI_INVALID_PARAMETER is returned.
+
+  @param[in]     This           A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+  @param[in]     Slot           The slot number of the SD card to send the command to.
+  @param[in,out] Packet         A pointer to the SD command data structure.
+  @param[in]     Event          If Event is NULL, blocking I/O is performed. If Event is
+                                not NULL, then nonblocking I/O is performed, and Event
+                                will be signaled when the Packet completes.
+
+  @retval EFI_SUCCESS           The SD Command Packet was sent by the host.
+  @retval EFI_DEVICE_ERROR      A device error occurred while attempting to send the SD
+                                command Packet.
+  @retval EFI_INVALID_PARAMETER Packet, Slot, or the contents of the Packet is invalid.
+  @retval EFI_INVALID_PARAMETER Packet defines a data command but both InDataBuffer and
+                                OutDataBuffer are NULL.
+  @retval EFI_NO_MEDIA          SD Device not present in the Slot.
+  @retval EFI_UNSUPPORTED       The command described by the SD Command Packet is not
+                                supported by the host controller.
+  @retval EFI_BAD_BUFFER_SIZE   The InTransferLength or OutTransferLength exceeds the
+                                limit supported by SD card ( i.e. if the number of bytes
+                                exceed the Last LBA).
+
+**/
+EFI_STATUS
+EFIAPI
+SdMmcPassThruPassThru (
+  IN     EFI_SD_MMC_PASS_THRU_PROTOCOL         *This,
+  IN     UINT8                                 Slot,
+  IN OUT EFI_SD_MMC_PASS_THRU_COMMAND_PACKET   *Packet,
+  IN     EFI_EVENT                             Event    OPTIONAL
+  )
+{
+  EFI_STATUS                      Status;
+  SD_MMC_HC_PRIVATE_DATA          *Private;
+  SD_MMC_HC_TRB                   *Trb;
+  EFI_TPL                         OldTpl;
+
+  if ((This == NULL) || (Packet == NULL)) {
+    return EFI_INVALID_PARAMETER;
+  }
+
+  if ((Packet->SdMmcCmdBlk == NULL) || (Packet->SdMmcStatusBlk == NULL)) {
+    return EFI_INVALID_PARAMETER;
+  }
+
+  if ((Packet->OutDataBuffer == NULL) && (Packet->OutTransferLength != 0)) {
+    return EFI_INVALID_PARAMETER;
+  }
+
+  if ((Packet->InDataBuffer == NULL) && (Packet->InTransferLength != 0)) {
+    return EFI_INVALID_PARAMETER;
+  }
+
+  Private = SD_MMC_HC_PRIVATE_FROM_THIS (This);
+
+  if (!Private->Slot[Slot].Enable) {
+    return EFI_INVALID_PARAMETER;
+  }
+
+  if (!Private->Slot[Slot].MediaPresent) {
+    return EFI_NO_MEDIA;
+  }
+
+  if (!Private->Slot[Slot].Initialized) {
+    return EFI_DEVICE_ERROR;
+  }
+
+  Trb = SdMmcCreateTrb (Private, Slot, Packet, Event);
+  if (Trb == NULL) {
+    return EFI_OUT_OF_RESOURCES;
+  }
+  //
+  // Immediately return for async I/O.
+  //
+  if (Event != NULL) {
+    return EFI_SUCCESS;
+  }
+
+  //
+  // Wait async I/O list is empty before execute sync I/O operation.
+  //
+  while (TRUE) {
+    OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
+    if (IsListEmpty (&Private->Queue)) {
+      gBS->RestoreTPL (OldTpl);
+      break;
+    }
+    gBS->RestoreTPL (OldTpl);
+  }
+
+  Status = SdMmcWaitTrbEnv (Private, Trb);
+  if (EFI_ERROR (Status)) {
+    goto Done;
+  }
+
+  Status = SdMmcExecTrb (Private, Trb);
+  if (EFI_ERROR (Status)) {
+    goto Done;
+  }
+
+  Status = SdMmcWaitTrbResult (Private, Trb);
+  if (EFI_ERROR (Status)) {
+    goto Done;
+  }
+
+Done:
+  if ((Trb != NULL) && (Trb->AdmaDesc != NULL)) {
+    FreePages (Trb->AdmaDesc, Trb->AdmaPages);
+  }
+
+  if (Trb != NULL) {
+    FreePool (Trb);
+  }
+
+  return Status;
+}
+
+/**
+  Used to retrieve next slot numbers supported by the SD controller. The function
+  returns information about all available slots (populated or not-populated).
+
+  The GetNextSlot() function retrieves the next slot number on an SD controller.
+  If on input Slot is 0xFF, then the slot number of the first slot on the SD controller
+  is returned.
+
+  If Slot is a slot number that was returned on a previous call to GetNextSlot(), then
+  the slot number of the next slot on the SD controller is returned.
+
+  If Slot is not 0xFF and Slot was not returned on a previous call to GetNextSlot(),
+  EFI_INVALID_PARAMETER is returned.
+
+  If Slot is the slot number of the last slot on the SD controller, then EFI_NOT_FOUND
+  is returned.
+
+  @param[in]     This           A pointer to the EFI_SD_MMMC_PASS_THRU_PROTOCOL instance.
+  @param[in,out] Slot           On input, a pointer to a slot number on the SD controller.
+                                On output, a pointer to the next slot number on the SD controller.
+                                An input value of 0xFF retrieves the first slot number on the SD
+                                controller.
+
+  @retval EFI_SUCCESS           The next slot number on the SD controller was returned in Slot.
+  @retval EFI_NOT_FOUND         There are no more slots on this SD controller.
+  @retval EFI_INVALID_PARAMETER Slot is not 0xFF and Slot was not returned on a previous call
+                                to GetNextSlot().
+
+**/
+EFI_STATUS
+EFIAPI
+SdMmcPassThruGetNextSlot (
+  IN     EFI_SD_MMC_PASS_THRU_PROTOCOL        *This,
+  IN OUT UINT8                                *Slot
+  )
+{
+  SD_MMC_HC_PRIVATE_DATA          *Private;
+  UINT8                           Index;
+
+  if ((This == NULL) || (Slot == NULL)) {
+    return EFI_INVALID_PARAMETER;
+  }
+
+  Private = SD_MMC_HC_PRIVATE_FROM_THIS (This);
+
+  if (*Slot == 0xFF) {
+    for (Index = 0; Index < SD_MMC_HC_MAX_SLOT; Index++) {
+      if (Private->Slot[Index].Enable) {
+        *Slot = Index;
+        Private->PreviousSlot = Index;
+        return EFI_SUCCESS;
+      }
+    }
+    return EFI_NOT_FOUND;
+  } else if (*Slot == Private->PreviousSlot) {
+    for (Index = *Slot + 1; Index < SD_MMC_HC_MAX_SLOT; Index++) {
+      if (Private->Slot[Index].Enable) {
+        *Slot = Index;
+        Private->PreviousSlot = Index;
+        return EFI_SUCCESS;
+      }
+    }
+    return EFI_NOT_FOUND;
+  } else {
+    return EFI_INVALID_PARAMETER;
+  }
+}
+
+/**
+  Used to allocate and build a device path node for an SD card on the SD controller.
+
+  The BuildDevicePath() function allocates and builds a single device node for the SD
+  card specified by Slot.
+
+  If the SD card specified by Slot is not present on the SD controller, then EFI_NOT_FOUND
+  is returned.
+
+  If DevicePath is NULL, then EFI_INVALID_PARAMETER is returned.
+
+  If there are not enough resources to allocate the device path node, then EFI_OUT_OF_RESOURCES
+  is returned.
+
+  Otherwise, DevicePath is allocated with the boot service AllocatePool(), the contents of
+  DevicePath are initialized to describe the SD card specified by Slot, and EFI_SUCCESS is
+  returned.
+
+  @param[in]     This           A pointer to the EFI_SD_MMMC_PASS_THRU_PROTOCOL instance.
+  @param[in]     Slot           Specifies the slot number of the SD card for which a device
+                                path node is to be allocated and built.
+  @param[in,out] DevicePath     A pointer to a single device path node that describes the SD
+                                card specified by Slot. This function is responsible for
+                                allocating the buffer DevicePath with the boot service
+                                AllocatePool(). It is the caller's responsibility to free
+                                DevicePath when the caller is finished with DevicePath.
+
+  @retval EFI_SUCCESS           The device path node that describes the SD card specified by
+                                Slot was allocated and returned in DevicePath.
+  @retval EFI_NOT_FOUND         The SD card specified by Slot does not exist on the SD controller.
+  @retval EFI_INVALID_PARAMETER DevicePath is NULL.
+  @retval EFI_OUT_OF_RESOURCES  There are not enough resources to allocate DevicePath.
+
+**/
+EFI_STATUS
+EFIAPI
+SdMmcPassThruBuildDevicePath (
+  IN     EFI_SD_MMC_PASS_THRU_PROTOCOL       *This,
+  IN     UINT8                               Slot,
+  IN OUT EFI_DEVICE_PATH_PROTOCOL            **DevicePath
+  )
+{
+  SD_MMC_HC_PRIVATE_DATA          *Private;
+  SD_DEVICE_PATH                  *SdNode;
+  EMMC_DEVICE_PATH                *EmmcNode;
+
+  if ((This == NULL) || (DevicePath == NULL) || (Slot >= SD_MMC_HC_MAX_SLOT)) {
+    return EFI_INVALID_PARAMETER;
+  }
+
+  Private = SD_MMC_HC_PRIVATE_FROM_THIS (This);
+
+  if ((!Private->Slot[Slot].Enable) || (!Private->Slot[Slot].MediaPresent)) {
+    return EFI_NOT_FOUND;
+  }
+
+  if (Private->Slot[Slot].CardType == SdCardType) {
+    SdNode = AllocateCopyPool (sizeof (SD_DEVICE_PATH), &mSdDpTemplate);
+    if (SdNode == NULL) {
+      return EFI_OUT_OF_RESOURCES;
+    }
+    SdNode->SlotNumber = Slot;
+
+    *DevicePath = (EFI_DEVICE_PATH_PROTOCOL *) SdNode;
+  } else if (Private->Slot[Slot].CardType == EmmcCardType) {
+    EmmcNode = AllocateCopyPool (sizeof (EMMC_DEVICE_PATH), &mEmmcDpTemplate);
+    if (EmmcNode == NULL) {
+      return EFI_OUT_OF_RESOURCES;
+    }
+    EmmcNode->SlotNumber = Slot;
+
+    *DevicePath = (EFI_DEVICE_PATH_PROTOCOL *) EmmcNode;
+  } else {
+    //
+    // Currently we only support SD and EMMC two device nodes.
+    //
+    return EFI_NOT_FOUND;
+  }
+
+  return EFI_SUCCESS;
+}
+
+/**
+  This function retrieves an SD card slot number based on the input device path.
+
+  The GetSlotNumber() function retrieves slot number for the SD card specified by
+  the DevicePath node. If DevicePath is NULL, EFI_INVALID_PARAMETER is returned.
+
+  If DevicePath is not a device path node type that the SD Pass Thru driver supports,
+  EFI_UNSUPPORTED is returned.
+
+  @param[in]  This              A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+  @param[in]  DevicePath        A pointer to the device path node that describes a SD
+                                card on the SD controller.
+  @param[out] Slot              On return, points to the slot number of an SD card on
+                                the SD controller.
+
+  @retval EFI_SUCCESS           SD card slot number is returned in Slot.
+  @retval EFI_INVALID_PARAMETER Slot or DevicePath is NULL.
+  @retval EFI_UNSUPPORTED       DevicePath is not a device path node type that the SD
+                                Pass Thru driver supports.
+
+**/
+EFI_STATUS
+EFIAPI
+SdMmcPassThruGetSlotNumber (
+  IN  EFI_SD_MMC_PASS_THRU_PROTOCOL          *This,
+  IN  EFI_DEVICE_PATH_PROTOCOL               *DevicePath,
+  OUT UINT8                                  *Slot
+  )
+{
+  SD_MMC_HC_PRIVATE_DATA          *Private;
+  SD_DEVICE_PATH                  *SdNode;
+  EMMC_DEVICE_PATH                *EmmcNode;
+  UINT8                           SlotNumber;
+
+  if ((This == NULL) || (DevicePath == NULL) || (Slot == NULL)) {
+    return EFI_INVALID_PARAMETER;
+  }
+
+  Private = SD_MMC_HC_PRIVATE_FROM_THIS (This);
+
+  //
+  // Check whether the DevicePath belongs to SD_DEVICE_PATH or EMMC_DEVICE_PATH
+  //
+  if ((DevicePath->Type != MESSAGING_DEVICE_PATH) ||
+      ((DevicePath->SubType != MSG_SD_DP) &&
+       (DevicePath->SubType != MSG_EMMC_DP)) ||
+      (DevicePathNodeLength(DevicePath) != sizeof(SD_DEVICE_PATH)) ||
+      (DevicePathNodeLength(DevicePath) != sizeof(EMMC_DEVICE_PATH))) {
+    return EFI_UNSUPPORTED;
+  }
+
+  if (DevicePath->SubType == MSG_SD_DP) {
+    SdNode = (SD_DEVICE_PATH *) DevicePath;
+    SlotNumber = SdNode->SlotNumber;
+  } else {
+    EmmcNode = (EMMC_DEVICE_PATH *) DevicePath;
+    SlotNumber = EmmcNode->SlotNumber;
+  }
+
+  if (SlotNumber >= SD_MMC_HC_MAX_SLOT) {
+    return EFI_NOT_FOUND;
+  }
+
+  if (Private->Slot[SlotNumber].Enable) {
+    *Slot = SlotNumber;
+    return EFI_SUCCESS;
+  } else {
+    return EFI_NOT_FOUND;
+  }
+}
+
+/**
+  Resets an SD card that is connected to the SD controller.
+
+  The ResetDevice() function resets the SD card specified by Slot.
+
+  If this SD controller does not support a device reset operation, EFI_UNSUPPORTED is
+  returned.
+
+  If Slot is not in a valid slot number for this SD controller, EFI_INVALID_PARAMETER
+  is returned.
+
+  If the device reset operation is completed, EFI_SUCCESS is returned.
+
+  @param[in]  This              A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+  @param[in]  Slot              Specifies the slot number of the SD card to be reset.
+
+  @retval EFI_SUCCESS           The SD card specified by Slot was reset.
+  @retval EFI_UNSUPPORTED       The SD controller does not support a device reset operation.
+  @retval EFI_INVALID_PARAMETER Slot number is invalid.
+  @retval EFI_NO_MEDIA          SD Device not present in the Slot.
+  @retval EFI_DEVICE_ERROR      The reset command failed due to a device error
+
+**/
+EFI_STATUS
+EFIAPI
+SdMmcPassThruResetDevice (
+  IN EFI_SD_MMC_PASS_THRU_PROTOCOL           *This,
+  IN UINT8                                   Slot
+  )
+{
+  SD_MMC_HC_PRIVATE_DATA          *Private;
+  LIST_ENTRY                      *Link;
+  LIST_ENTRY                      *NextLink;
+  SD_MMC_HC_TRB                   *Trb;
+  EFI_TPL                         OldTpl;
+
+  if (This == NULL) {
+    return EFI_INVALID_PARAMETER;
+  }
+
+  Private = SD_MMC_HC_PRIVATE_FROM_THIS (This);
+
+  if (!Private->Slot[Slot].Enable) {
+    return EFI_INVALID_PARAMETER;
+  }
+
+  if (!Private->Slot[Slot].MediaPresent) {
+    return EFI_NO_MEDIA;
+  }
+
+  if (!Private->Slot[Slot].Initialized) {
+    return EFI_DEVICE_ERROR;
+  }
+  //
+  // Free all async I/O requests in the queue
+  //
+  OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
+
+  for (Link = GetFirstNode (&Private->Queue);
+       !IsNull (&Private->Queue, Link);
+       Link = NextLink) {
+    NextLink = GetNextNode (&Private->Queue, Link);
+    RemoveEntryList (Link);
+    Trb = SD_MMC_HC_TRB_FROM_THIS (Link);
+    Trb->Packet->TransactionStatus = EFI_ABORTED;
+    gBS->SignalEvent (Trb->Event);
+    SdMmcFreeTrb (Trb);
+  }
+
+  gBS->RestoreTPL (OldTpl);
+
+  return EFI_SUCCESS;
+}
+
diff --git a/Drivers/SdMmc/Xenon/MvSdMmcPciHcDxe.h b/Drivers/SdMmc/Xenon/MvSdMmcPciHcDxe.h
new file mode 100644
index 0000000..6a2a279
--- /dev/null
+++ b/Drivers/SdMmc/Xenon/MvSdMmcPciHcDxe.h
@@ -0,0 +1,785 @@
+/** @file
+
+  Provides some data structure definitions used by the SD/MMC host controller driver.
+
+Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
+This program and the accompanying materials
+are licensed and made available under the terms and conditions of the BSD License
+which accompanies this distribution.  The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _SD_MMC_PCI_HC_DXE_H_
+#define _SD_MMC_PCI_HC_DXE_H_
+
+#include <Uefi.h>
+
+#include <IndustryStandard/Pci.h>
+#include <IndustryStandard/Emmc.h>
+#include <IndustryStandard/Sd.h>
+
+#include <Library/UefiDriverEntryPoint.h>
+#include <Library/DebugLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/UefiLib.h>
+#include <Library/DevicePathLib.h>
+
+#include <Protocol/DevicePath.h>
+#include <Protocol/PciIo.h>
+#include <Protocol/DriverBinding.h>
+#include <Protocol/ComponentName.h>
+#include <Protocol/ComponentName2.h>
+#include <Protocol/SdMmcPassThru.h>
+
+#include "SdMmcPciHci.h"
+
+extern EFI_COMPONENT_NAME_PROTOCOL  gSdMmcPciHcComponentName;
+extern EFI_COMPONENT_NAME2_PROTOCOL gSdMmcPciHcComponentName2;
+extern EFI_DRIVER_BINDING_PROTOCOL  gSdMmcPciHcDriverBinding;
+
+#define SD_MMC_HC_PRIVATE_SIGNATURE  SIGNATURE_32 ('s', 'd', 't', 'f')
+
+#define SD_MMC_HC_PRIVATE_FROM_THIS(a) \
+    CR(a, SD_MMC_HC_PRIVATE_DATA, PassThru, SD_MMC_HC_PRIVATE_SIGNATURE)
+
+//
+// Generic time out value, 1 microsecond as unit.
+//
+#define SD_MMC_HC_GENERIC_TIMEOUT     1 * 1000 * 1000
+
+//
+// SD/MMC async transfer timer interval, set by experience.
+// The unit is 100us, takes 1ms as interval.
+//
+#define SD_MMC_HC_ASYNC_TIMER   EFI_TIMER_PERIOD_MILLISECONDS(1)
+//
+// SD/MMC removable device enumeration timer interval, set by experience.
+// The unit is 100us, takes 100ms as interval.
+//
+#define SD_MMC_HC_ENUM_TIMER    EFI_TIMER_PERIOD_MILLISECONDS(100)
+
+typedef enum {
+  UnknownCardType,
+  SdCardType,
+  SdioCardType,
+  MmcCardType,
+  EmmcCardType
+} SD_MMC_CARD_TYPE;
+
+typedef enum {
+  RemovableSlot,
+  EmbeddedSlot,
+  SharedBusSlot,
+  UnknownSlot
+} EFI_SD_MMC_SLOT_TYPE;
+
+typedef struct {
+  BOOLEAN                           Enable;
+  EFI_SD_MMC_SLOT_TYPE              SlotType;
+  BOOLEAN                           MediaPresent;
+  BOOLEAN                           Initialized;
+  SD_MMC_CARD_TYPE                  CardType;
+} SD_MMC_HC_SLOT;
+
+typedef struct {
+  UINTN                               Signature;
+
+  EFI_HANDLE                          ControllerHandle;
+  EFI_PCI_IO_PROTOCOL                 *PciIo;
+
+  EFI_SD_MMC_PASS_THRU_PROTOCOL       PassThru;
+
+  UINT64                              PciAttributes;
+  //
+  // The field is used to record the previous slot in GetNextSlot().
+  //
+  UINT8                               PreviousSlot;
+  //
+  // For Non-blocking operation.
+  //
+  EFI_EVENT                           TimerEvent;
+  //
+  // For Sd removable device enumeration.
+  //
+  EFI_EVENT                           ConnectEvent;
+  LIST_ENTRY                          Queue;
+
+  SD_MMC_HC_SLOT                      Slot[SD_MMC_HC_MAX_SLOT];
+  SD_MMC_HC_SLOT_CAP                  Capability[SD_MMC_HC_MAX_SLOT];
+  UINT64                              MaxCurrent[SD_MMC_HC_MAX_SLOT];
+
+  UINT32                              ControllerVersion;
+} SD_MMC_HC_PRIVATE_DATA;
+
+#define SD_MMC_HC_TRB_SIG             SIGNATURE_32 ('T', 'R', 'B', 'T')
+
+//
+// TRB (Transfer Request Block) contains information for the cmd request.
+//
+typedef struct {
+  UINT32                              Signature;
+  LIST_ENTRY                          TrbList;
+
+  UINT8                               Slot;
+  UINT16                              BlockSize;
+
+  EFI_SD_MMC_PASS_THRU_COMMAND_PACKET *Packet;
+  VOID                                *Data;
+  UINT32                              DataLen;
+  BOOLEAN                             Read;
+  EFI_PHYSICAL_ADDRESS                DataPhy;
+  VOID                                *DataMap;
+  SD_MMC_HC_TRANSFER_MODE             Mode;
+
+  EFI_EVENT                           Event;
+  BOOLEAN                             Started;
+  UINT64                              Timeout;
+
+  SD_MMC_HC_ADMA_DESC_LINE            *AdmaDesc;
+  EFI_PHYSICAL_ADDRESS                AdmaDescPhy;
+  VOID                                *AdmaMap;
+  UINT32                              AdmaPages;
+
+  SD_MMC_HC_PRIVATE_DATA              *Private;
+} SD_MMC_HC_TRB;
+
+#define SD_MMC_HC_TRB_FROM_THIS(a) \
+    CR(a, SD_MMC_HC_TRB, TrbList, SD_MMC_HC_TRB_SIG)
+
+//
+// Task for Non-blocking mode.
+//
+typedef struct {
+  UINT32                              Signature;
+  LIST_ENTRY                          Link;
+
+  UINT8                               Slot;
+  EFI_SD_MMC_PASS_THRU_COMMAND_PACKET *Packet;
+  BOOLEAN                             IsStart;
+  EFI_EVENT                           Event;
+  UINT64                              RetryTimes;
+  BOOLEAN                             InfiniteWait;
+  VOID                                *Map;
+  VOID                                *MapAddress;
+} SD_MMC_HC_QUEUE;
+
+//
+// Prototypes
+//
+/**
+  Execute card identification procedure.
+
+  @param[in] Private        A pointer to the SD_MMC_HC_PRIVATE_DATA instance.
+  @param[in] Slot           The slot number of the SD card to send the command to.
+
+  @retval EFI_SUCCESS       The card is identified correctly.
+  @retval Others            The card can't be identified.
+
+**/
+typedef
+EFI_STATUS
+(*CARD_TYPE_DETECT_ROUTINE) (
+  IN SD_MMC_HC_PRIVATE_DATA             *Private,
+  IN UINT8                              Slot
+  );
+
+/**
+  Sends SD command to an SD card that is attached to the SD controller.
+
+  The PassThru() function sends the SD command specified by Packet to the SD card
+  specified by Slot.
+
+  If Packet is successfully sent to the SD card, then EFI_SUCCESS is returned.
+
+  If a device error occurs while sending the Packet, then EFI_DEVICE_ERROR is returned.
+
+  If Slot is not in a valid range for the SD controller, then EFI_INVALID_PARAMETER
+  is returned.
+
+  If Packet defines a data command but both InDataBuffer and OutDataBuffer are NULL,
+  EFI_INVALID_PARAMETER is returned.
+
+  @param[in]     This           A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+  @param[in]     Slot           The slot number of the SD card to send the command to.
+  @param[in,out] Packet         A pointer to the SD command data structure.
+  @param[in]     Event          If Event is NULL, blocking I/O is performed. If Event is
+                                not NULL, then nonblocking I/O is performed, and Event
+                                will be signaled when the Packet completes.
+
+  @retval EFI_SUCCESS           The SD Command Packet was sent by the host.
+  @retval EFI_DEVICE_ERROR      A device error occurred while attempting to send the SD
+                                command Packet.
+  @retval EFI_INVALID_PARAMETER Packet, Slot, or the contents of the Packet is invalid.
+  @retval EFI_INVALID_PARAMETER Packet defines a data command but both InDataBuffer and
+                                OutDataBuffer are NULL.
+  @retval EFI_NO_MEDIA          SD Device not present in the Slot.
+  @retval EFI_UNSUPPORTED       The command described by the SD Command Packet is not
+                                supported by the host controller.
+  @retval EFI_BAD_BUFFER_SIZE   The InTransferLength or OutTransferLength exceeds the
+                                limit supported by SD card ( i.e. if the number of bytes
+                                exceed the Last LBA).
+
+**/
+EFI_STATUS
+EFIAPI
+SdMmcPassThruPassThru (
+  IN     EFI_SD_MMC_PASS_THRU_PROTOCOL         *This,
+  IN     UINT8                                 Slot,
+  IN OUT EFI_SD_MMC_PASS_THRU_COMMAND_PACKET   *Packet,
+  IN     EFI_EVENT                             Event    OPTIONAL
+  );
+
+/**
+  Used to retrieve next slot numbers supported by the SD controller. The function
+  returns information about all available slots (populated or not-populated).
+
+  The GetNextSlot() function retrieves the next slot number on an SD controller.
+  If on input Slot is 0xFF, then the slot number of the first slot on the SD controller
+  is returned.
+
+  If Slot is a slot number that was returned on a previous call to GetNextSlot(), then
+  the slot number of the next slot on the SD controller is returned.
+
+  If Slot is not 0xFF and Slot was not returned on a previous call to GetNextSlot(),
+  EFI_INVALID_PARAMETER is returned.
+
+  If Slot is the slot number of the last slot on the SD controller, then EFI_NOT_FOUND
+  is returned.
+
+  @param[in]     This           A pointer to the EFI_SD_MMMC_PASS_THRU_PROTOCOL instance.
+  @param[in,out] Slot           On input, a pointer to a slot number on the SD controller.
+                                On output, a pointer to the next slot number on the SD controller.
+                                An input value of 0xFF retrieves the first slot number on the SD
+                                controller.
+
+  @retval EFI_SUCCESS           The next slot number on the SD controller was returned in Slot.
+  @retval EFI_NOT_FOUND         There are no more slots on this SD controller.
+  @retval EFI_INVALID_PARAMETER Slot is not 0xFF and Slot was not returned on a previous call
+                                to GetNextSlot().
+
+**/
+EFI_STATUS
+EFIAPI
+SdMmcPassThruGetNextSlot (
+  IN     EFI_SD_MMC_PASS_THRU_PROTOCOL        *This,
+  IN OUT UINT8                                *Slot
+  );
+
+/**
+  Used to allocate and build a device path node for an SD card on the SD controller.
+
+  The BuildDevicePath() function allocates and builds a single device node for the SD
+  card specified by Slot.
+
+  If the SD card specified by Slot is not present on the SD controller, then EFI_NOT_FOUND
+  is returned.
+
+  If DevicePath is NULL, then EFI_INVALID_PARAMETER is returned.
+
+  If there are not enough resources to allocate the device path node, then EFI_OUT_OF_RESOURCES
+  is returned.
+
+  Otherwise, DevicePath is allocated with the boot service AllocatePool(), the contents of
+  DevicePath are initialized to describe the SD card specified by Slot, and EFI_SUCCESS is
+  returned.
+
+  @param[in]     This           A pointer to the EFI_SD_MMMC_PASS_THRU_PROTOCOL instance.
+  @param[in]     Slot           Specifies the slot number of the SD card for which a device
+                                path node is to be allocated and built.
+  @param[in,out] DevicePath     A pointer to a single device path node that describes the SD
+                                card specified by Slot. This function is responsible for
+                                allocating the buffer DevicePath with the boot service
+                                AllocatePool(). It is the caller's responsibility to free
+                                DevicePath when the caller is finished with DevicePath.
+
+  @retval EFI_SUCCESS           The device path node that describes the SD card specified by
+                                Slot was allocated and returned in DevicePath.
+  @retval EFI_NOT_FOUND         The SD card specified by Slot does not exist on the SD controller.
+  @retval EFI_INVALID_PARAMETER DevicePath is NULL.
+  @retval EFI_OUT_OF_RESOURCES  There are not enough resources to allocate DevicePath.
+
+**/
+EFI_STATUS
+EFIAPI
+SdMmcPassThruBuildDevicePath (
+  IN     EFI_SD_MMC_PASS_THRU_PROTOCOL       *This,
+  IN     UINT8                               Slot,
+  IN OUT EFI_DEVICE_PATH_PROTOCOL            **DevicePath
+  );
+
+/**
+  This function retrieves an SD card slot number based on the input device path.
+
+  The GetSlotNumber() function retrieves slot number for the SD card specified by
+  the DevicePath node. If DevicePath is NULL, EFI_INVALID_PARAMETER is returned.
+
+  If DevicePath is not a device path node type that the SD Pass Thru driver supports,
+  EFI_UNSUPPORTED is returned.
+
+  @param[in]  This              A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+  @param[in]  DevicePath        A pointer to the device path node that describes a SD
+                                card on the SD controller.
+  @param[out] Slot              On return, points to the slot number of an SD card on
+                                the SD controller.
+
+  @retval EFI_SUCCESS           SD card slot number is returned in Slot.
+  @retval EFI_INVALID_PARAMETER Slot or DevicePath is NULL.
+  @retval EFI_UNSUPPORTED       DevicePath is not a device path node type that the SD
+                                Pass Thru driver supports.
+
+**/
+EFI_STATUS
+EFIAPI
+SdMmcPassThruGetSlotNumber (
+  IN  EFI_SD_MMC_PASS_THRU_PROTOCOL          *This,
+  IN  EFI_DEVICE_PATH_PROTOCOL               *DevicePath,
+  OUT UINT8                                  *Slot
+  );
+
+/**
+  Resets an SD card that is connected to the SD controller.
+
+  The ResetDevice() function resets the SD card specified by Slot.
+
+  If this SD controller does not support a device reset operation, EFI_UNSUPPORTED is
+  returned.
+
+  If Slot is not in a valid slot number for this SD controller, EFI_INVALID_PARAMETER
+  is returned.
+
+  If the device reset operation is completed, EFI_SUCCESS is returned.
+
+  @param[in]  This              A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+  @param[in]  Slot              Specifies the slot number of the SD card to be reset.
+
+  @retval EFI_SUCCESS           The SD card specified by Slot was reset.
+  @retval EFI_UNSUPPORTED       The SD controller does not support a device reset operation.
+  @retval EFI_INVALID_PARAMETER Slot number is invalid.
+  @retval EFI_NO_MEDIA          SD Device not present in the Slot.
+  @retval EFI_DEVICE_ERROR      The reset command failed due to a device error
+
+**/
+EFI_STATUS
+EFIAPI
+SdMmcPassThruResetDevice (
+  IN EFI_SD_MMC_PASS_THRU_PROTOCOL           *This,
+  IN UINT8                                   Slot
+  );
+
+//
+// Driver model protocol interfaces
+//
+/**
+  Tests to see if this driver supports a given controller. If a child device is provided,
+  it further tests to see if this driver supports creating a handle for the specified child device.
+
+  This function checks to see if the driver specified by This supports the device specified by
+  ControllerHandle. Drivers will typically use the device path attached to
+  ControllerHandle and/or the services from the bus I/O abstraction attached to
+  ControllerHandle to determine if the driver supports ControllerHandle. This function
+  may be called many times during platform initialization. In order to reduce boot times, the tests
+  performed by this function must be very small, and take as little time as possible to execute. This
+  function must not change the state of any hardware devices, and this function must be aware that the
+  device specified by ControllerHandle may already be managed by the same driver or a
+  different driver. This function must match its calls to AllocatePages() with FreePages(),
+  AllocatePool() with FreePool(), and OpenProtocol() with CloseProtocol().
+  Since ControllerHandle may have been previously started by the same driver, if a protocol is
+  already in the opened state, then it must not be closed with CloseProtocol(). This is required
+  to guarantee the state of ControllerHandle is not modified by this function.
+
+  @param[in]  This                 A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
+  @param[in]  ControllerHandle     The handle of the controller to test. This handle
+                                   must support a protocol interface that supplies
+                                   an I/O abstraction to the driver.
+  @param[in]  RemainingDevicePath  A pointer to the remaining portion of a device path.  This
+                                   parameter is ignored by device drivers, and is optional for bus
+                                   drivers. For bus drivers, if this parameter is not NULL, then
+                                   the bus driver must determine if the bus controller specified
+                                   by ControllerHandle and the child controller specified
+                                   by RemainingDevicePath are both supported by this
+                                   bus driver.
+
+  @retval EFI_SUCCESS              The device specified by ControllerHandle and
+                                   RemainingDevicePath is supported by the driver specified by This.
+  @retval EFI_ALREADY_STARTED      The device specified by ControllerHandle and
+                                   RemainingDevicePath is already being managed by the driver
+                                   specified by This.
+  @retval EFI_ACCESS_DENIED        The device specified by ControllerHandle and
+                                   RemainingDevicePath is already being managed by a different
+                                   driver or an application that requires exclusive access.
+                                   Currently not implemented.
+  @retval EFI_UNSUPPORTED          The device specified by ControllerHandle and
+                                   RemainingDevicePath is not supported by the driver specified by This.
+**/
+EFI_STATUS
+EFIAPI
+SdMmcPciHcDriverBindingSupported (
+  IN EFI_DRIVER_BINDING_PROTOCOL *This,
+  IN EFI_HANDLE                  Controller,
+  IN EFI_DEVICE_PATH_PROTOCOL    *RemainingDevicePath
+  );
+
+/**
+  Starts a device controller or a bus controller.
+
+  The Start() function is designed to be invoked from the EFI boot service ConnectController().
+  As a result, much of the error checking on the parameters to Start() has been moved into this
+  common boot service. It is legal to call Start() from other locations,
+  but the following calling restrictions must be followed or the system behavior will not be deterministic.
+  1. ControllerHandle must be a valid EFI_HANDLE.
+  2. If RemainingDevicePath is not NULL, then it must be a pointer to a naturally aligned
+     EFI_DEVICE_PATH_PROTOCOL.
+  3. Prior to calling Start(), the Supported() function for the driver specified by This must
+     have been called with the same calling parameters, and Supported() must have returned EFI_SUCCESS.
+
+  @param[in]  This                 A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
+  @param[in]  ControllerHandle     The handle of the controller to start. This handle
+                                   must support a protocol interface that supplies
+                                   an I/O abstraction to the driver.
+  @param[in]  RemainingDevicePath  A pointer to the remaining portion of a device path.  This
+                                   parameter is ignored by device drivers, and is optional for bus
+                                   drivers. For a bus driver, if this parameter is NULL, then handles
+                                   for all the children of Controller are created by this driver.
+                                   If this parameter is not NULL and the first Device Path Node is
+                                   not the End of Device Path Node, then only the handle for the
+                                   child device specified by the first Device Path Node of
+                                   RemainingDevicePath is created by this driver.
+                                   If the first Device Path Node of RemainingDevicePath is
+                                   the End of Device Path Node, no child handle is created by this
+                                   driver.
+
+  @retval EFI_SUCCESS              The device was started.
+  @retval EFI_DEVICE_ERROR         The device could not be started due to a device error.Currently not implemented.
+  @retval EFI_OUT_OF_RESOURCES     The request could not be completed due to a lack of resources.
+  @retval Others                   The driver failded to start the device.
+
+**/
+EFI_STATUS
+EFIAPI
+SdMmcPciHcDriverBindingStart (
+  IN EFI_DRIVER_BINDING_PROTOCOL     *This,
+  IN EFI_HANDLE                      Controller,
+  IN EFI_DEVICE_PATH_PROTOCOL        *RemainingDevicePath
+  );
+
+/**
+  Stops a device controller or a bus controller.
+
+  The Stop() function is designed to be invoked from the EFI boot service DisconnectController().
+  As a result, much of the error checking on the parameters to Stop() has been moved
+  into this common boot service. It is legal to call Stop() from other locations,
+  but the following calling restrictions must be followed or the system behavior will not be deterministic.
+  1. ControllerHandle must be a valid EFI_HANDLE that was used on a previous call to this
+     same driver's Start() function.
+  2. The first NumberOfChildren handles of ChildHandleBuffer must all be a valid
+     EFI_HANDLE. In addition, all of these handles must have been created in this driver's
+     Start() function, and the Start() function must have called OpenProtocol() on
+     ControllerHandle with an Attribute of EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER.
+
+  @param[in]  This              A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
+  @param[in]  ControllerHandle  A handle to the device being stopped. The handle must
+                                support a bus specific I/O protocol for the driver
+                                to use to stop the device.
+  @param[in]  NumberOfChildren  The number of child device handles in ChildHandleBuffer.
+  @param[in]  ChildHandleBuffer An array of child handles to be freed. May be NULL
+                                if NumberOfChildren is 0.
+
+  @retval EFI_SUCCESS           The device was stopped.
+  @retval EFI_DEVICE_ERROR      The device could not be stopped due to a device error.
+
+**/
+EFI_STATUS
+EFIAPI
+SdMmcPciHcDriverBindingStop (
+  IN  EFI_DRIVER_BINDING_PROTOCOL     *This,
+  IN  EFI_HANDLE                      Controller,
+  IN  UINTN                           NumberOfChildren,
+  IN  EFI_HANDLE                      *ChildHandleBuffer
+  );
+
+//
+// EFI Component Name Functions
+//
+/**
+  Retrieves a Unicode string that is the user readable name of the driver.
+
+  This function retrieves the user readable name of a driver in the form of a
+  Unicode string. If the driver specified by This has a user readable name in
+  the language specified by Language, then a pointer to the driver name is
+  returned in DriverName, and EFI_SUCCESS is returned. If the driver specified
+  by This does not support the language specified by Language,
+  then EFI_UNSUPPORTED is returned.
+
+  @param  This[in]              A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
+                                EFI_COMPONENT_NAME_PROTOCOL instance.
+
+  @param  Language[in]          A pointer to a Null-terminated ASCII string
+                                array indicating the language. This is the
+                                language of the driver name that the caller is
+                                requesting, and it must match one of the
+                                languages specified in SupportedLanguages. The
+                                number of languages supported by a driver is up
+                                to the driver writer. Language is specified
+                                in RFC 4646 or ISO 639-2 language code format.
+
+  @param  DriverName[out]       A pointer to the Unicode string to return.
+                                This Unicode string is the name of the
+                                driver specified by This in the language
+                                specified by Language.
+
+  @retval EFI_SUCCESS           The Unicode string for the Driver specified by
+                                This and the language specified by Language was
+                                returned in DriverName.
+
+  @retval EFI_INVALID_PARAMETER Language is NULL.
+
+  @retval EFI_INVALID_PARAMETER DriverName is NULL.
+
+  @retval EFI_UNSUPPORTED       The driver specified by This does not support
+                                the language specified by Language.
+
+**/
+EFI_STATUS
+EFIAPI
+SdMmcPciHcComponentNameGetDriverName (
+  IN  EFI_COMPONENT_NAME_PROTOCOL     *This,
+  IN  CHAR8                           *Language,
+  OUT CHAR16                          **DriverName
+  );
+
+/**
+  Retrieves a Unicode string that is the user readable name of the controller
+  that is being managed by a driver.
+
+  This function retrieves the user readable name of the controller specified by
+  ControllerHandle and ChildHandle in the form of a Unicode string. If the
+  driver specified by This has a user readable name in the language specified by
+  Language, then a pointer to the controller name is returned in ControllerName,
+  and EFI_SUCCESS is returned.  If the driver specified by This is not currently
+  managing the controller specified by ControllerHandle and ChildHandle,
+  then EFI_UNSUPPORTED is returned.  If the driver specified by This does not
+  support the language specified by Language, then EFI_UNSUPPORTED is returned.
+
+  @param  This[in]              A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
+                                EFI_COMPONENT_NAME_PROTOCOL instance.
+
+  @param  ControllerHandle[in]  The handle of a controller that the driver
+                                specified by This is managing.  This handle
+                                specifies the controller whose name is to be
+                                returned.
+
+  @param  ChildHandle[in]       The handle of the child controller to retrieve
+                                the name of.  This is an optional parameter that
+                                may be NULL.  It will be NULL for device
+                                drivers.  It will also be NULL for a bus drivers
+                                that wish to retrieve the name of the bus
+                                controller.  It will not be NULL for a bus
+                                driver that wishes to retrieve the name of a
+                                child controller.
+
+  @param  Language[in]          A pointer to a Null-terminated ASCII string
+                                array indicating the language.  This is the
+                                language of the driver name that the caller is
+                                requesting, and it must match one of the
+                                languages specified in SupportedLanguages. The
+                                number of languages supported by a driver is up
+                                to the driver writer. Language is specified in
+                                RFC 4646 or ISO 639-2 language code format.
+
+  @param  ControllerName[out]   A pointer to the Unicode string to return.
+                                This Unicode string is the name of the
+                                controller specified by ControllerHandle and
+                                ChildHandle in the language specified by
+                                Language from the point of view of the driver
+                                specified by This.
+
+  @retval EFI_SUCCESS           The Unicode string for the user readable name in
+                                the language specified by Language for the
+                                driver specified by This was returned in
+                                DriverName.
+
+  @retval EFI_INVALID_PARAMETER ControllerHandle is not a valid EFI_HANDLE.
+
+  @retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid
+                                EFI_HANDLE.
+
+  @retval EFI_INVALID_PARAMETER Language is NULL.
+
+  @retval EFI_INVALID_PARAMETER ControllerName is NULL.
+
+  @retval EFI_UNSUPPORTED       The driver specified by This is not currently
+                                managing the controller specified by
+                                ControllerHandle and ChildHandle.
+
+  @retval EFI_UNSUPPORTED       The driver specified by This does not support
+                                the language specified by Language.
+
+**/
+EFI_STATUS
+EFIAPI
+SdMmcPciHcComponentNameGetControllerName (
+  IN  EFI_COMPONENT_NAME_PROTOCOL     *This,
+  IN  EFI_HANDLE                      ControllerHandle,
+  IN  EFI_HANDLE                      ChildHandle, OPTIONAL
+  IN  CHAR8                           *Language,
+  OUT CHAR16                          **ControllerName
+  );
+
+/**
+  Create a new TRB for the SD/MMC cmd request.
+
+  @param[in] Private        A pointer to the SD_MMC_HC_PRIVATE_DATA instance.
+  @param[in] Slot           The slot number of the SD card to send the command to.
+  @param[in] Packet         A pointer to the SD command data structure.
+  @param[in] Event          If Event is NULL, blocking I/O is performed. If Event is
+                            not NULL, then nonblocking I/O is performed, and Event
+                            will be signaled when the Packet completes.
+
+  @return Created Trb or NULL.
+
+**/
+SD_MMC_HC_TRB *
+SdMmcCreateTrb (
+  IN SD_MMC_HC_PRIVATE_DATA              *Private,
+  IN UINT8                               Slot,
+  IN EFI_SD_MMC_PASS_THRU_COMMAND_PACKET *Packet,
+  IN EFI_EVENT                           Event
+  );
+
+/**
+  Free the resource used by the TRB.
+
+  @param[in] Trb            The pointer to the SD_MMC_HC_TRB instance.
+
+**/
+VOID
+SdMmcFreeTrb (
+  IN SD_MMC_HC_TRB           *Trb
+  );
+
+/**
+  Check if the env is ready for execute specified TRB.
+
+  @param[in] Private        A pointer to the SD_MMC_HC_PRIVATE_DATA instance.
+  @param[in] Trb            The pointer to the SD_MMC_HC_TRB instance.
+
+  @retval EFI_SUCCESS       The env is ready for TRB execution.
+  @retval EFI_NOT_READY     The env is not ready for TRB execution.
+  @retval Others            Some erros happen.
+
+**/
+EFI_STATUS
+SdMmcCheckTrbEnv (
+  IN SD_MMC_HC_PRIVATE_DATA           *Private,
+  IN SD_MMC_HC_TRB                    *Trb
+  );
+
+/**
+  Wait for the env to be ready for execute specified TRB.
+
+  @param[in] Private        A pointer to the SD_MMC_HC_PRIVATE_DATA instance.
+  @param[in] Trb            The pointer to the SD_MMC_HC_TRB instance.
+
+  @retval EFI_SUCCESS       The env is ready for TRB execution.
+  @retval EFI_TIMEOUT       The env is not ready for TRB execution in time.
+  @retval Others            Some erros happen.
+
+**/
+EFI_STATUS
+SdMmcWaitTrbEnv (
+  IN SD_MMC_HC_PRIVATE_DATA           *Private,
+  IN SD_MMC_HC_TRB                    *Trb
+  );
+
+/**
+  Execute the specified TRB.
+
+  @param[in] Private        A pointer to the SD_MMC_HC_PRIVATE_DATA instance.
+  @param[in] Trb            The pointer to the SD_MMC_HC_TRB instance.
+
+  @retval EFI_SUCCESS       The TRB is sent to host controller successfully.
+  @retval Others            Some erros happen when sending this request to the host controller.
+
+**/
+EFI_STATUS
+SdMmcExecTrb (
+  IN SD_MMC_HC_PRIVATE_DATA           *Private,
+  IN SD_MMC_HC_TRB                    *Trb
+  );
+
+/**
+  Check the TRB execution result.
+
+  @param[in] Private        A pointer to the SD_MMC_HC_PRIVATE_DATA instance.
+  @param[in] Trb            The pointer to the SD_MMC_HC_TRB instance.
+
+  @retval EFI_SUCCESS       The TRB is executed successfully.
+  @retval EFI_NOT_READY     The TRB is not completed for execution.
+  @retval Others            Some erros happen when executing this request.
+
+**/
+EFI_STATUS
+SdMmcCheckTrbResult (
+  IN SD_MMC_HC_PRIVATE_DATA           *Private,
+  IN SD_MMC_HC_TRB                    *Trb
+  );
+
+/**
+  Wait for the TRB execution result.
+
+  @param[in] Private        A pointer to the SD_MMC_HC_PRIVATE_DATA instance.
+  @param[in] Trb            The pointer to the SD_MMC_HC_TRB instance.
+
+  @retval EFI_SUCCESS       The TRB is executed successfully.
+  @retval Others            Some erros happen when executing this request.
+
+**/
+EFI_STATUS
+SdMmcWaitTrbResult (
+  IN SD_MMC_HC_PRIVATE_DATA           *Private,
+  IN SD_MMC_HC_TRB                    *Trb
+  );
+
+/**
+  Execute EMMC device identification procedure.
+
+  Refer to EMMC Electrical Standard Spec 5.1 Section 6.4 for details.
+
+  @param[in] Private        A pointer to the SD_MMC_HC_PRIVATE_DATA instance.
+  @param[in] Slot           The slot number of the SD card to send the command to.
+
+  @retval EFI_SUCCESS       There is a EMMC card.
+  @retval Others            There is not a EMMC card.
+
+**/
+EFI_STATUS
+EmmcIdentification (
+  IN SD_MMC_HC_PRIVATE_DATA             *Private,
+  IN UINT8                              Slot
+  );
+
+/**
+  Execute EMMC device identification procedure.
+
+  Refer to EMMC Electrical Standard Spec 5.1 Section 6.4 for details.
+
+  @param[in] Private        A pointer to the SD_MMC_HC_PRIVATE_DATA instance.
+  @param[in] Slot           The slot number of the SD card to send the command to.
+
+  @retval EFI_SUCCESS       There is a EMMC card.
+  @retval Others            There is not a EMMC card.
+
+**/
+EFI_STATUS
+SdCardIdentification (
+  IN SD_MMC_HC_PRIVATE_DATA             *Private,
+  IN UINT8                              Slot
+  );
+
+#endif
diff --git a/Drivers/SdMmc/Xenon/MvSdMmcPciHcDxe.inf b/Drivers/SdMmc/Xenon/MvSdMmcPciHcDxe.inf
new file mode 100644
index 0000000..e26e6a0
--- /dev/null
+++ b/Drivers/SdMmc/Xenon/MvSdMmcPciHcDxe.inf
@@ -0,0 +1,72 @@
+## @file
+#  SdMmcPciHcDxe driver is used to manage those host controllers which comply with SD
+#  Host Controller Simplified Specifiction version 3.0.
+#
+#  It will produce EFI_SD_MMC_PASS_THRU_PROTOCOL to allow sending SD/MMC/eMMC cmds
+#  to specified devices from upper layer.
+#
+#  Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
+#
+#  This program and the accompanying materials
+#  are licensed and made available under the terms and conditions of the BSD License
+#  which accompanies this distribution. The full text of the license may be found at
+#  http://opensource.org/licenses/bsd-license.php
+#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#
+##
+
+[Defines]
+  INF_VERSION                    = 0x00010005
+  BASE_NAME                      = SdMmcPciHcDxe
+  MODULE_UNI_FILE                = SdMmcPciHcDxe.uni
+  FILE_GUID                      = 8E325979-3FE1-4927-AAE2-8F5C4BD2AF0D
+  MODULE_TYPE                    = UEFI_DRIVER
+  VERSION_STRING                 = 1.0
+  ENTRY_POINT                    = InitializeSdMmcPciHcDxe
+
+#
+# The following information is for reference only and not required by the build tools.
+#
+#  VALID_ARCHITECTURES           = IA32 X64 IPF EBC
+#
+#  DRIVER_BINDING                =  gSdMmcPciHcDxeDriverBinding
+#  COMPONENT_NAME                =  gSdMmcPciHcDxeComponentName
+#  COMPONENT_NAME2               =  gSdMmcPciHcDxeComponentName2
+#
+#
+
+[Sources]
+  SdMmcPciHcDxe.h
+  SdMmcPciHcDxe.c
+  EmmcDevice.c
+  SdDevice.c
+  SdMmcPciHci.h
+  SdMmcPciHci.c
+  ComponentName.c
+
+[Packages]
+  MdePkg/MdePkg.dec
+
+[LibraryClasses]
+  DevicePathLib
+  UefiBootServicesTableLib
+  UefiRuntimeServicesTableLib
+  MemoryAllocationLib
+  BaseMemoryLib
+  UefiLib
+  BaseLib
+  UefiDriverEntryPoint
+  DebugLib
+
+[Protocols]
+  gEfiDevicePathProtocolGuid                    ## TO_START
+  gEfiPciIoProtocolGuid                         ## TO_START
+  gEfiSdMmcPassThruProtocolGuid                 ## BY_START
+
+# [Event]
+# EVENT_TYPE_PERIODIC_TIMER ## SOMETIMES_CONSUMES
+
+[UserExtensions.TianoCore."ExtraFiles"]
+  SdMmcPciHcDxeExtra.uni
diff --git a/Drivers/SdMmc/Xenon/MvSdMmcPciHcDxe.uni b/Drivers/SdMmc/Xenon/MvSdMmcPciHcDxe.uni
new file mode 100644
index 0000000..57f9fa7
--- /dev/null
+++ b/Drivers/SdMmc/Xenon/MvSdMmcPciHcDxe.uni
@@ -0,0 +1,23 @@
+// /** @file
+// SdMmcPciHcDxe driver is used to manage those host controllers which comply with SD
+// Host Controller Simplified Specifiction version 3.0.
+//
+// It will produce EFI_SD_MMC_PASS_THRU_PROTOCOL to allow sending SD/MMC/eMMC cmds
+// to specified devices from upper layer.
+//
+// Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
+//
+// This program and the accompanying materials
+// are licensed and made available under the terms and conditions of the BSD License
+// which accompanies this distribution. The full text of the license may be found at
+// http://opensource.org/licenses/bsd-license.php
+// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+//
+// **/
+
+
+#string STR_MODULE_ABSTRACT             #language en-US "SD/MMC Pci Host Controller driver to manage SD/MMC host controllers"
+
+#string STR_MODULE_DESCRIPTION          #language en-US "This driver follows the UEFI driver model and produces SD/MMC Pass Thru protocol for upper layer bus driver."
+
diff --git a/Drivers/SdMmc/Xenon/MvSdMmcPciHcDxeExtra.uni b/Drivers/SdMmc/Xenon/MvSdMmcPciHcDxeExtra.uni
new file mode 100644
index 0000000..c7aedb4
--- /dev/null
+++ b/Drivers/SdMmc/Xenon/MvSdMmcPciHcDxeExtra.uni
@@ -0,0 +1,19 @@
+// /** @file
+// SdMmcPciHcDxe Localized Strings and Content
+//
+// Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
+//
+// This program and the accompanying materials
+// are licensed and made available under the terms and conditions of the BSD License
+// which accompanies this distribution. The full text of the license may be found at
+// http://opensource.org/licenses/bsd-license.php
+// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+//
+// **/
+
+#string STR_PROPERTIES_MODULE_NAME
+#language en-US
+"SD/MMC Pci Host Controller Driver"
+
+
diff --git a/Drivers/SdMmc/Xenon/MvSdMmcPciHci.c b/Drivers/SdMmc/Xenon/MvSdMmcPciHci.c
new file mode 100644
index 0000000..ccbf355
--- /dev/null
+++ b/Drivers/SdMmc/Xenon/MvSdMmcPciHci.c
@@ -0,0 +1,1923 @@
+/** @file
+  This driver is used to manage SD/MMC PCI host controllers which are compliance
+  with SD Host Controller Simplified Specification version 3.00.
+
+  It would expose EFI_SD_MMC_PASS_THRU_PROTOCOL for upper layer use.
+
+  Copyright (c) 2015 - 2016, Intel Corporation. All rights reserved.<BR>
+  This program and the accompanying materials
+  are licensed and made available under the terms and conditions of the BSD License
+  which accompanies this distribution.  The full text of the license may be found at
+  http://opensource.org/licenses/bsd-license.php
+
+  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "SdMmcPciHcDxe.h"
+
+/**
+  Dump the content of SD/MMC host controller's Capability Register.
+
+  @param[in]  Slot            The slot number of the SD card to send the command to.
+  @param[in]  Capability      The buffer to store the capability data.
+
+**/
+VOID
+DumpCapabilityReg (
+  IN UINT8                Slot,
+  IN SD_MMC_HC_SLOT_CAP   *Capability
+  )
+{
+  //
+  // Dump Capability Data
+  //
+  DEBUG ((DEBUG_INFO, " == Slot [%d] Capability is 0x%x ==\n", Slot, Capability));
+  DEBUG ((DEBUG_INFO, "   Timeout Clk Freq  %d%a\n", Capability->TimeoutFreq, (Capability->TimeoutUnit) ? "MHz" : "KHz"));
+  DEBUG ((DEBUG_INFO, "   Base Clk Freq     %dMHz\n", Capability->BaseClkFreq));
+  DEBUG ((DEBUG_INFO, "   Max Blk Len       %dbytes\n", 512 * (1 << Capability->MaxBlkLen)));
+  DEBUG ((DEBUG_INFO, "   8-bit Support     %a\n", Capability->BusWidth8 ? "TRUE" : "FALSE"));
+  DEBUG ((DEBUG_INFO, "   ADMA2 Support     %a\n", Capability->Adma2 ? "TRUE" : "FALSE"));
+  DEBUG ((DEBUG_INFO, "   HighSpeed Support %a\n", Capability->HighSpeed ? "TRUE" : "FALSE"));
+  DEBUG ((DEBUG_INFO, "   SDMA Support      %a\n", Capability->Sdma ? "TRUE" : "FALSE"));
+  DEBUG ((DEBUG_INFO, "   Suspend/Resume    %a\n", Capability->SuspRes ? "TRUE" : "FALSE"));
+  DEBUG ((DEBUG_INFO, "   Voltage 3.3       %a\n", Capability->Voltage33 ? "TRUE" : "FALSE"));
+  DEBUG ((DEBUG_INFO, "   Voltage 3.0       %a\n", Capability->Voltage30 ? "TRUE" : "FALSE"));
+  DEBUG ((DEBUG_INFO, "   Voltage 1.8       %a\n", Capability->Voltage18 ? "TRUE" : "FALSE"));
+  DEBUG ((DEBUG_INFO, "   64-bit Sys Bus    %a\n", Capability->SysBus64 ? "TRUE" : "FALSE"));
+  DEBUG ((DEBUG_INFO, "   Async Interrupt   %a\n", Capability->AsyncInt ? "TRUE" : "FALSE"));
+  DEBUG ((DEBUG_INFO, "   SlotType          "));
+  if (Capability->SlotType == 0x00) {
+    DEBUG ((DEBUG_INFO, "%a\n", "Removable Slot"));
+  } else if (Capability->SlotType == 0x01) {
+    DEBUG ((DEBUG_INFO, "%a\n", "Embedded Slot"));
+  } else if (Capability->SlotType == 0x02) {
+    DEBUG ((DEBUG_INFO, "%a\n", "Shared Bus Slot"));
+  } else {
+    DEBUG ((DEBUG_INFO, "%a\n", "Reserved"));
+  }
+  DEBUG ((DEBUG_INFO, "   SDR50  Support    %a\n", Capability->Sdr50 ? "TRUE" : "FALSE"));
+  DEBUG ((DEBUG_INFO, "   SDR104 Support    %a\n", Capability->Sdr104 ? "TRUE" : "FALSE"));
+  DEBUG ((DEBUG_INFO, "   DDR50  Support    %a\n", Capability->Ddr50 ? "TRUE" : "FALSE"));
+  DEBUG ((DEBUG_INFO, "   Driver Type A     %a\n", Capability->DriverTypeA ? "TRUE" : "FALSE"));
+  DEBUG ((DEBUG_INFO, "   Driver Type C     %a\n", Capability->DriverTypeC ? "TRUE" : "FALSE"));
+  DEBUG ((DEBUG_INFO, "   Driver Type D     %a\n", Capability->DriverTypeD ? "TRUE" : "FALSE"));
+  DEBUG ((DEBUG_INFO, "   Driver Type 4     %a\n", Capability->DriverType4 ? "TRUE" : "FALSE"));
+  if (Capability->TimerCount == 0) {
+    DEBUG ((DEBUG_INFO, "   Retuning TimerCnt Disabled\n", 2 * (Capability->TimerCount - 1)));
+  } else {
+    DEBUG ((DEBUG_INFO, "   Retuning TimerCnt %dseconds\n", 2 * (Capability->TimerCount - 1)));
+  }
+  DEBUG ((DEBUG_INFO, "   SDR50 Tuning      %a\n", Capability->TuningSDR50 ? "TRUE" : "FALSE"));
+  DEBUG ((DEBUG_INFO, "   Retuning Mode     Mode %d\n", Capability->RetuningMod + 1));
+  DEBUG ((DEBUG_INFO, "   Clock Multiplier  M = %d\n", Capability->ClkMultiplier + 1));
+  DEBUG ((DEBUG_INFO, "   HS 400            %a\n", Capability->Hs400 ? "TRUE" : "FALSE"));
+  return;
+}
+
+/**
+  Read SlotInfo register from SD/MMC host controller pci config space.
+
+  @param[in]  PciIo        The PCI IO protocol instance.
+  @param[out] FirstBar     The buffer to store the first BAR value.
+  @param[out] SlotNum      The buffer to store the supported slot number.
+
+  @retval EFI_SUCCESS      The operation succeeds.
+  @retval Others           The operation fails.
+
+**/
+EFI_STATUS
+EFIAPI
+SdMmcHcGetSlotInfo (
+  IN     EFI_PCI_IO_PROTOCOL   *PciIo,
+     OUT UINT8                 *FirstBar,
+     OUT UINT8                 *SlotNum
+  )
+{
+  EFI_STATUS                   Status;
+  SD_MMC_HC_SLOT_INFO          SlotInfo;
+
+  Status = PciIo->Pci.Read (
+                        PciIo,
+                        EfiPciIoWidthUint8,
+                        SD_MMC_HC_SLOT_OFFSET,
+                        sizeof (SlotInfo),
+                        &SlotInfo
+                        );
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+
+  *FirstBar = SlotInfo.FirstBar;
+  *SlotNum  = SlotInfo.SlotNum + 1;
+  ASSERT ((*FirstBar + *SlotNum) < SD_MMC_HC_MAX_SLOT);
+  return EFI_SUCCESS;
+}
+
+/**
+  Read/Write specified SD/MMC host controller mmio register.
+
+  @param[in]      PciIo        The PCI IO protocol instance.
+  @param[in]      BarIndex     The BAR index of the standard PCI Configuration
+                               header to use as the base address for the memory
+                               operation to perform.
+  @param[in]      Offset       The offset within the selected BAR to start the
+                               memory operation.
+  @param[in]      Read         A boolean to indicate it's read or write operation.
+  @param[in]      Count        The width of the mmio register in bytes.
+                               Must be 1, 2 , 4 or 8 bytes.
+  @param[in, out] Data         For read operations, the destination buffer to store
+                               the results. For write operations, the source buffer
+                               to write data from. The caller is responsible for
+                               having ownership of the data buffer and ensuring its
+                               size not less than Count bytes.
+
+  @retval EFI_INVALID_PARAMETER The PciIo or Data is NULL or the Count is not valid.
+  @retval EFI_SUCCESS           The read/write operation succeeds.
+  @retval Others                The read/write operation fails.
+
+**/
+EFI_STATUS
+EFIAPI
+SdMmcHcRwMmio (
+  IN     EFI_PCI_IO_PROTOCOL   *PciIo,
+  IN     UINT8                 BarIndex,
+  IN     UINT32                Offset,
+  IN     BOOLEAN               Read,
+  IN     UINT8                 Count,
+  IN OUT VOID                  *Data
+  )
+{
+  EFI_STATUS                   Status;
+
+  if ((PciIo == NULL) || (Data == NULL))  {
+    return EFI_INVALID_PARAMETER;
+  }
+
+  if ((Count != 1) && (Count != 2) && (Count != 4) && (Count != 8)) {
+    return EFI_INVALID_PARAMETER;
+  }
+
+  if (Read) {
+    Status = PciIo->Mem.Read (
+                          PciIo,
+                          EfiPciIoWidthUint8,
+                          BarIndex,
+                          (UINT64) Offset,
+                          Count,
+                          Data
+                          );
+  } else {
+    Status = PciIo->Mem.Write (
+                          PciIo,
+                          EfiPciIoWidthUint8,
+                          BarIndex,
+                          (UINT64) Offset,
+                          Count,
+                          Data
+                          );
+  }
+
+  return Status;
+}
+
+/**
+  Do OR operation with the value of the specified SD/MMC host controller mmio register.
+
+  @param[in] PciIo             The PCI IO protocol instance.
+  @param[in] BarIndex          The BAR index of the standard PCI Configuration
+                               header to use as the base address for the memory
+                               operation to perform.
+  @param[in] Offset            The offset within the selected BAR to start the
+                               memory operation.
+  @param[in] Count             The width of the mmio register in bytes.
+                               Must be 1, 2 , 4 or 8 bytes.
+  @param[in] OrData            The pointer to the data used to do OR operation.
+                               The caller is responsible for having ownership of
+                               the data buffer and ensuring its size not less than
+                               Count bytes.
+
+  @retval EFI_INVALID_PARAMETER The PciIo or OrData is NULL or the Count is not valid.
+  @retval EFI_SUCCESS           The OR operation succeeds.
+  @retval Others                The OR operation fails.
+
+**/
+EFI_STATUS
+EFIAPI
+SdMmcHcOrMmio (
+  IN  EFI_PCI_IO_PROTOCOL      *PciIo,
+  IN  UINT8                    BarIndex,
+  IN  UINT32                   Offset,
+  IN  UINT8                    Count,
+  IN  VOID                     *OrData
+  )
+{
+  EFI_STATUS                   Status;
+  UINT64                       Data;
+  UINT64                       Or;
+
+  Status = SdMmcHcRwMmio (PciIo, BarIndex, Offset, TRUE, Count, &Data);
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+
+  if (Count == 1) {
+    Or = *(UINT8*) OrData;
+  } else if (Count == 2) {
+    Or = *(UINT16*) OrData;
+  } else if (Count == 4) {
+    Or = *(UINT32*) OrData;
+  } else if (Count == 8) {
+    Or = *(UINT64*) OrData;
+  } else {
+    return EFI_INVALID_PARAMETER;
+  }
+
+  Data  |= Or;
+  Status = SdMmcHcRwMmio (PciIo, BarIndex, Offset, FALSE, Count, &Data);
+
+  return Status;
+}
+
+/**
+  Do AND operation with the value of the specified SD/MMC host controller mmio register.
+
+  @param[in] PciIo             The PCI IO protocol instance.
+  @param[in] BarIndex          The BAR index of the standard PCI Configuration
+                               header to use as the base address for the memory
+                               operation to perform.
+  @param[in] Offset            The offset within the selected BAR to start the
+                               memory operation.
+  @param[in] Count             The width of the mmio register in bytes.
+                               Must be 1, 2 , 4 or 8 bytes.
+  @param[in] AndData           The pointer to the data used to do AND operation.
+                               The caller is responsible for having ownership of
+                               the data buffer and ensuring its size not less than
+                               Count bytes.
+
+  @retval EFI_INVALID_PARAMETER The PciIo or AndData is NULL or the Count is not valid.
+  @retval EFI_SUCCESS           The AND operation succeeds.
+  @retval Others                The AND operation fails.
+
+**/
+EFI_STATUS
+EFIAPI
+SdMmcHcAndMmio (
+  IN  EFI_PCI_IO_PROTOCOL      *PciIo,
+  IN  UINT8                    BarIndex,
+  IN  UINT32                   Offset,
+  IN  UINT8                    Count,
+  IN  VOID                     *AndData
+  )
+{
+  EFI_STATUS                   Status;
+  UINT64                       Data;
+  UINT64                       And;
+
+  Status = SdMmcHcRwMmio (PciIo, BarIndex, Offset, TRUE, Count, &Data);
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+
+  if (Count == 1) {
+    And = *(UINT8*) AndData;
+  } else if (Count == 2) {
+    And = *(UINT16*) AndData;
+  } else if (Count == 4) {
+    And = *(UINT32*) AndData;
+  } else if (Count == 8) {
+    And = *(UINT64*) AndData;
+  } else {
+    return EFI_INVALID_PARAMETER;
+  }
+
+  Data  &= And;
+  Status = SdMmcHcRwMmio (PciIo, BarIndex, Offset, FALSE, Count, &Data);
+
+  return Status;
+}
+
+/**
+  Wait for the value of the specified MMIO register set to the test value.
+
+  @param[in]  PciIo         The PCI IO protocol instance.
+  @param[in]  BarIndex      The BAR index of the standard PCI Configuration
+                            header to use as the base address for the memory
+                            operation to perform.
+  @param[in]  Offset        The offset within the selected BAR to start the
+                            memory operation.
+  @param[in]  Count         The width of the mmio register in bytes.
+                            Must be 1, 2, 4 or 8 bytes.
+  @param[in]  MaskValue     The mask value of memory.
+  @param[in]  TestValue     The test value of memory.
+
+  @retval EFI_NOT_READY     The MMIO register hasn't set to the expected value.
+  @retval EFI_SUCCESS       The MMIO register has expected value.
+  @retval Others            The MMIO operation fails.
+
+**/
+EFI_STATUS
+EFIAPI
+SdMmcHcCheckMmioSet (
+  IN  EFI_PCI_IO_PROTOCOL       *PciIo,
+  IN  UINT8                     BarIndex,
+  IN  UINT32                    Offset,
+  IN  UINT8                     Count,
+  IN  UINT64                    MaskValue,
+  IN  UINT64                    TestValue
+  )
+{
+  EFI_STATUS            Status;
+  UINT64                Value;
+
+  //
+  // Access PCI MMIO space to see if the value is the tested one.
+  //
+  Value  = 0;
+  Status = SdMmcHcRwMmio (PciIo, BarIndex, Offset, TRUE, Count, &Value);
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+
+  Value &= MaskValue;
+
+  if (Value == TestValue) {
+    return EFI_SUCCESS;
+  }
+
+  return EFI_NOT_READY;
+}
+
+/**
+  Wait for the value of the specified MMIO register set to the test value.
+
+  @param[in]  PciIo         The PCI IO protocol instance.
+  @param[in]  BarIndex      The BAR index of the standard PCI Configuration
+                            header to use as the base address for the memory
+                            operation to perform.
+  @param[in]  Offset        The offset within the selected BAR to start the
+                            memory operation.
+  @param[in]  Count         The width of the mmio register in bytes.
+                            Must be 1, 2, 4 or 8 bytes.
+  @param[in]  MaskValue     The mask value of memory.
+  @param[in]  TestValue     The test value of memory.
+  @param[in]  Timeout       The time out value for wait memory set, uses 1
+                            microsecond as a unit.
+
+  @retval EFI_TIMEOUT       The MMIO register hasn't expected value in timeout
+                            range.
+  @retval EFI_SUCCESS       The MMIO register has expected value.
+  @retval Others            The MMIO operation fails.
+
+**/
+EFI_STATUS
+EFIAPI
+SdMmcHcWaitMmioSet (
+  IN  EFI_PCI_IO_PROTOCOL       *PciIo,
+  IN  UINT8                     BarIndex,
+  IN  UINT32                    Offset,
+  IN  UINT8                     Count,
+  IN  UINT64                    MaskValue,
+  IN  UINT64                    TestValue,
+  IN  UINT64                    Timeout
+  )
+{
+  EFI_STATUS            Status;
+  BOOLEAN               InfiniteWait;
+
+  if (Timeout == 0) {
+    InfiniteWait = TRUE;
+  } else {
+    InfiniteWait = FALSE;
+  }
+
+  while (InfiniteWait || (Timeout > 0)) {
+    Status = SdMmcHcCheckMmioSet (
+               PciIo,
+               BarIndex,
+               Offset,
+               Count,
+               MaskValue,
+               TestValue
+               );
+    if (Status != EFI_NOT_READY) {
+      return Status;
+    }
+
+    //
+    // Stall for 1 microsecond.
+    //
+    gBS->Stall (1);
+
+    Timeout--;
+  }
+
+  return EFI_TIMEOUT;
+}
+
+/**
+  Software reset the specified SD/MMC host controller and enable all interrupts.
+
+  @param[in] PciIo          The PCI IO protocol instance.
+  @param[in] Slot           The slot number of the SD card to send the command to.
+
+  @retval EFI_SUCCESS       The software reset executes successfully.
+  @retval Others            The software reset fails.
+
+**/
+EFI_STATUS
+SdMmcHcReset (
+  IN EFI_PCI_IO_PROTOCOL    *PciIo,
+  IN UINT8                  Slot
+  )
+{
+  EFI_STATUS                Status;
+  UINT8                     SwReset;
+
+  SwReset = 0xFF;
+  Status  = SdMmcHcRwMmio (PciIo, Slot, SD_MMC_HC_SW_RST, FALSE, sizeof (SwReset), &SwReset);
+
+  if (EFI_ERROR (Status)) {
+    DEBUG ((DEBUG_ERROR, "SdMmcHcReset: write full 1 fails: %r\n", Status));
+    return Status;
+  }
+
+  Status = SdMmcHcWaitMmioSet (
+             PciIo,
+             Slot,
+             SD_MMC_HC_SW_RST,
+             sizeof (SwReset),
+             0xFF,
+             0x00,
+             SD_MMC_HC_GENERIC_TIMEOUT
+             );
+  if (EFI_ERROR (Status)) {
+    DEBUG ((DEBUG_INFO, "SdMmcHcReset: reset done with %r\n", Status));
+    return Status;
+  }
+  //
+  // Enable all interrupt after reset all.
+  //
+  Status = SdMmcHcEnableInterrupt (PciIo, Slot);
+
+  return Status;
+}
+
+/**
+  Set all interrupt status bits in Normal and Error Interrupt Status Enable
+  register.
+
+  @param[in] PciIo          The PCI IO protocol instance.
+  @param[in] Slot           The slot number of the SD card to send the command to.
+
+  @retval EFI_SUCCESS       The operation executes successfully.
+  @retval Others            The operation fails.
+
+**/
+EFI_STATUS
+SdMmcHcEnableInterrupt (
+  IN EFI_PCI_IO_PROTOCOL    *PciIo,
+  IN UINT8                  Slot
+  )
+{
+  EFI_STATUS                Status;
+  UINT16                    IntStatus;
+
+  //
+  // Enable all bits in Error Interrupt Status Enable Register
+  //
+  IntStatus = 0xFFFF;
+  Status = SdMmcHcRwMmio (PciIo, Slot, SD_MMC_HC_ERR_INT_STS_EN, FALSE, sizeof (IntStatus), &IntStatus);
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+  //
+  // Enable all bits in Normal Interrupt Status Enable Register
+  //
+  IntStatus = 0xFFFF;
+  Status = SdMmcHcRwMmio (PciIo, Slot, SD_MMC_HC_NOR_INT_STS_EN, FALSE, sizeof (IntStatus), &IntStatus);
+
+  return Status;
+}
+
+/**
+  Get the capability data from the specified slot.
+
+  @param[in]  PciIo           The PCI IO protocol instance.
+  @param[in]  Slot            The slot number of the SD card to send the command to.
+  @param[out] Capability      The buffer to store the capability data.
+
+  @retval EFI_SUCCESS         The operation executes successfully.
+  @retval Others              The operation fails.
+
+**/
+EFI_STATUS
+SdMmcHcGetCapability (
+  IN     EFI_PCI_IO_PROTOCOL  *PciIo,
+  IN     UINT8                Slot,
+     OUT SD_MMC_HC_SLOT_CAP   *Capability
+  )
+{
+  EFI_STATUS                Status;
+  UINT64                    Cap;
+
+  Status = SdMmcHcRwMmio (PciIo, Slot, SD_MMC_HC_CAP, TRUE, sizeof (Cap), &Cap);
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+
+  CopyMem (Capability, &Cap, sizeof (Cap));
+
+  return EFI_SUCCESS;
+}
+
+/**
+  Get the maximum current capability data from the specified slot.
+
+  @param[in]  PciIo           The PCI IO protocol instance.
+  @param[in]  Slot            The slot number of the SD card to send the command to.
+  @param[out] MaxCurrent      The buffer to store the maximum current capability data.
+
+  @retval EFI_SUCCESS         The operation executes successfully.
+  @retval Others              The operation fails.
+
+**/
+EFI_STATUS
+SdMmcHcGetMaxCurrent (
+  IN     EFI_PCI_IO_PROTOCOL  *PciIo,
+  IN     UINT8                Slot,
+     OUT UINT64               *MaxCurrent
+  )
+{
+  EFI_STATUS          Status;
+
+  Status = SdMmcHcRwMmio (PciIo, Slot, SD_MMC_HC_MAX_CURRENT_CAP, TRUE, sizeof (UINT64), MaxCurrent);
+
+  return Status;
+}
+
+/**
+  Detect whether there is a SD/MMC card attached at the specified SD/MMC host controller
+  slot.
+
+  Refer to SD Host Controller Simplified spec 3.0 Section 3.1 for details.
+
+  @param[in]  PciIo         The PCI IO protocol instance.
+  @param[in]  Slot          The slot number of the SD card to send the command to.
+  @param[out] MediaPresent  The pointer to the media present boolean value.
+
+  @retval EFI_SUCCESS       There is no media change happened.
+  @retval EFI_MEDIA_CHANGED There is media change happened.
+  @retval Others            The detection fails.
+
+**/
+EFI_STATUS
+SdMmcHcCardDetect (
+  IN EFI_PCI_IO_PROTOCOL    *PciIo,
+  IN UINT8                  Slot,
+     OUT BOOLEAN            *MediaPresent
+  )
+{
+  EFI_STATUS                Status;
+  UINT16                    Data;
+  UINT32                    PresentState;
+
+  //
+  // Check Present State Register to see if there is a card presented.
+  //
+  Status = SdMmcHcRwMmio (PciIo, Slot, SD_MMC_HC_PRESENT_STATE, TRUE, sizeof (PresentState), &PresentState);
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+
+  if ((PresentState & BIT16) != 0) {
+    *MediaPresent = TRUE;
+  } else {
+    *MediaPresent = FALSE;
+  }
+
+  //
+  // Check Normal Interrupt Status Register
+  //
+  Status = SdMmcHcRwMmio (PciIo, Slot, SD_MMC_HC_NOR_INT_STS, TRUE, sizeof (Data), &Data);
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+
+  if ((Data & (BIT6 | BIT7)) != 0) {
+    //
+    // Clear BIT6 and BIT7 by writing 1 to these two bits if set.
+    //
+    Data  &= BIT6 | BIT7;
+    Status = SdMmcHcRwMmio (PciIo, Slot, SD_MMC_HC_NOR_INT_STS, FALSE, sizeof (Data), &Data);
+    if (EFI_ERROR (Status)) {
+      return Status;
+    }
+
+    return EFI_MEDIA_CHANGED;
+  }
+
+  return EFI_SUCCESS;
+}
+
+/**
+  Stop SD/MMC card clock.
+
+  Refer to SD Host Controller Simplified spec 3.0 Section 3.2.2 for details.
+
+  @param[in] PciIo          The PCI IO protocol instance.
+  @param[in] Slot           The slot number of the SD card to send the command to.
+
+  @retval EFI_SUCCESS       Succeed to stop SD/MMC clock.
+  @retval Others            Fail to stop SD/MMC clock.
+
+**/
+EFI_STATUS
+SdMmcHcStopClock (
+  IN EFI_PCI_IO_PROTOCOL    *PciIo,
+  IN UINT8                  Slot
+  )
+{
+  EFI_STATUS                Status;
+  UINT32                    PresentState;
+  UINT16                    ClockCtrl;
+
+  //
+  // Ensure no SD transactions are occurring on the SD Bus by
+  // waiting for Command Inhibit (DAT) and Command Inhibit (CMD)
+  // in the Present State register to be 0.
+  //
+  Status = SdMmcHcWaitMmioSet (
+             PciIo,
+             Slot,
+             SD_MMC_HC_PRESENT_STATE,
+             sizeof (PresentState),
+             BIT0 | BIT1,
+             0,
+             SD_MMC_HC_GENERIC_TIMEOUT
+             );
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+
+  //
+  // Set SD Clock Enable in the Clock Control register to 0
+  //
+  ClockCtrl = (UINT16)~BIT2;
+  Status = SdMmcHcAndMmio (PciIo, Slot, SD_MMC_HC_CLOCK_CTRL, sizeof (ClockCtrl), &ClockCtrl);
+
+  return Status;
+}
+
+/**
+  SD/MMC card clock supply.
+
+  Refer to SD Host Controller Simplified spec 3.0 Section 3.2.1 for details.
+
+  @param[in] PciIo          The PCI IO protocol instance.
+  @param[in] Slot           The slot number of the SD card to send the command to.
+  @param[in] ClockFreq      The max clock frequency to be set. The unit is KHz.
+  @param[in] Capability     The capability of the slot.
+
+  @retval EFI_SUCCESS       The clock is supplied successfully.
+  @retval Others            The clock isn't supplied successfully.
+
+**/
+EFI_STATUS
+SdMmcHcClockSupply (
+  IN EFI_PCI_IO_PROTOCOL    *PciIo,
+  IN UINT8                  Slot,
+  IN UINT64                 ClockFreq,
+  IN SD_MMC_HC_SLOT_CAP     Capability
+  )
+{
+  EFI_STATUS                Status;
+  UINT32                    BaseClkFreq;
+  UINT32                    SettingFreq;
+  UINT32                    Divisor;
+  UINT32                    Remainder;
+  UINT16                    ControllerVer;
+  UINT16                    ClockCtrl;
+
+  //
+  // Calculate a divisor for SD clock frequency
+  //
+  ASSERT (Capability.BaseClkFreq != 0);
+
+  BaseClkFreq = Capability.BaseClkFreq;
+  if (ClockFreq == 0) {
+    return EFI_INVALID_PARAMETER;
+  }
+
+  if (ClockFreq > (BaseClkFreq * 1000)) {
+    ClockFreq = BaseClkFreq * 1000;
+  }
+
+  //
+  // Calculate the divisor of base frequency.
+  //
+  Divisor     = 0;
+  SettingFreq = BaseClkFreq * 1000;
+  while (ClockFreq < SettingFreq) {
+    Divisor++;
+
+    SettingFreq = (BaseClkFreq * 1000) / (2 * Divisor);
+    Remainder   = (BaseClkFreq * 1000) % (2 * Divisor);
+    if ((ClockFreq == SettingFreq) && (Remainder == 0)) {
+      break;
+    }
+    if ((ClockFreq == SettingFreq) && (Remainder != 0)) {
+      SettingFreq ++;
+    }
+  }
+
+  DEBUG ((DEBUG_INFO, "BaseClkFreq %dMHz Divisor %d ClockFreq %dKhz\n", BaseClkFreq, Divisor, ClockFreq));
+
+  Status = SdMmcHcRwMmio (PciIo, Slot, SD_MMC_HC_CTRL_VER, TRUE, sizeof (ControllerVer), &ControllerVer);
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+  //
+  // Set SDCLK Frequency Select and Internal Clock Enable fields in Clock Control register.
+  //
+  if ((ControllerVer & 0xFF) == 2) {
+    ASSERT (Divisor <= 0x3FF);
+    ClockCtrl = ((Divisor & 0xFF) << 8) | ((Divisor & 0x300) >> 2);
+  } else if (((ControllerVer & 0xFF) == 0) || ((ControllerVer & 0xFF) == 1)) {
+    //
+    // Only the most significant bit can be used as divisor.
+    //
+    if (((Divisor - 1) & Divisor) != 0) {
+      Divisor = 1 << (HighBitSet32 (Divisor) + 1);
+    }
+    ASSERT (Divisor <= 0x80);
+    ClockCtrl = (Divisor & 0xFF) << 8;
+  } else {
+    DEBUG ((DEBUG_ERROR, "Unknown SD Host Controller Spec version [0x%x]!!!\n", ControllerVer));
+    return EFI_UNSUPPORTED;
+  }
+
+  //
+  // Stop bus clock at first
+  //
+  Status = SdMmcHcStopClock (PciIo, Slot);
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+
+  //
+  // Supply clock frequency with specified divisor
+  //
+  ClockCtrl |= BIT0;
+  Status = SdMmcHcRwMmio (PciIo, Slot, SD_MMC_HC_CLOCK_CTRL, FALSE, sizeof (ClockCtrl), &ClockCtrl);
+  if (EFI_ERROR (Status)) {
+    DEBUG ((DEBUG_ERROR, "Set SDCLK Frequency Select and Internal Clock Enable fields fails\n"));
+    return Status;
+  }
+
+  //
+  // Wait Internal Clock Stable in the Clock Control register to be 1
+  //
+  Status = SdMmcHcWaitMmioSet (
+             PciIo,
+             Slot,
+             SD_MMC_HC_CLOCK_CTRL,
+             sizeof (ClockCtrl),
+             BIT1,
+             BIT1,
+             SD_MMC_HC_GENERIC_TIMEOUT
+             );
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+
+  //
+  // Set SD Clock Enable in the Clock Control register to 1
+  //
+  ClockCtrl = BIT2;
+  Status = SdMmcHcOrMmio (PciIo, Slot, SD_MMC_HC_CLOCK_CTRL, sizeof (ClockCtrl), &ClockCtrl);
+
+  return Status;
+}
+
+/**
+  SD/MMC bus power control.
+
+  Refer to SD Host Controller Simplified spec 3.0 Section 3.3 for details.
+
+  @param[in] PciIo          The PCI IO protocol instance.
+  @param[in] Slot           The slot number of the SD card to send the command to.
+  @param[in] PowerCtrl      The value setting to the power control register.
+
+  @retval TRUE              There is a SD/MMC card attached.
+  @retval FALSE             There is no a SD/MMC card attached.
+
+**/
+EFI_STATUS
+SdMmcHcPowerControl (
+  IN EFI_PCI_IO_PROTOCOL    *PciIo,
+  IN UINT8                  Slot,
+  IN UINT8                  PowerCtrl
+  )
+{
+  EFI_STATUS                Status;
+
+  //
+  // Clr SD Bus Power
+  //
+  PowerCtrl &= (UINT8)~BIT0;
+  Status = SdMmcHcRwMmio (PciIo, Slot, SD_MMC_HC_POWER_CTRL, FALSE, sizeof (PowerCtrl), &PowerCtrl);
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+
+  //
+  // Set SD Bus Voltage Select and SD Bus Power fields in Power Control Register
+  //
+  PowerCtrl |= BIT0;
+  Status = SdMmcHcRwMmio (PciIo, Slot, SD_MMC_HC_POWER_CTRL, FALSE, sizeof (PowerCtrl), &PowerCtrl);
+
+  return Status;
+}
+
+/**
+  Set the SD/MMC bus width.
+
+  Refer to SD Host Controller Simplified spec 3.0 Section 3.4 for details.
+
+  @param[in] PciIo          The PCI IO protocol instance.
+  @param[in] Slot           The slot number of the SD card to send the command to.
+  @param[in] BusWidth       The bus width used by the SD/MMC device, it must be 1, 4 or 8.
+
+  @retval EFI_SUCCESS       The bus width is set successfully.
+  @retval Others            The bus width isn't set successfully.
+
+**/
+EFI_STATUS
+SdMmcHcSetBusWidth (
+  IN EFI_PCI_IO_PROTOCOL    *PciIo,
+  IN UINT8                  Slot,
+  IN UINT16                 BusWidth
+  )
+{
+  EFI_STATUS                Status;
+  UINT8                     HostCtrl1;
+
+  if (BusWidth == 1) {
+    HostCtrl1 = (UINT8)~(BIT5 | BIT1);
+    Status = SdMmcHcAndMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL1, sizeof (HostCtrl1), &HostCtrl1);
+  } else if (BusWidth == 4) {
+    Status = SdMmcHcRwMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL1, TRUE, sizeof (HostCtrl1), &HostCtrl1);
+    if (EFI_ERROR (Status)) {
+      return Status;
+    }
+    HostCtrl1 |= BIT1;
+    HostCtrl1 &= (UINT8)~BIT5;
+    Status = SdMmcHcRwMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL1, FALSE, sizeof (HostCtrl1), &HostCtrl1);
+  } else if (BusWidth == 8) {
+    Status = SdMmcHcRwMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL1, TRUE, sizeof (HostCtrl1), &HostCtrl1);
+    if (EFI_ERROR (Status)) {
+      return Status;
+    }
+    HostCtrl1 &= (UINT8)~BIT1;
+    HostCtrl1 |= BIT5;
+    Status = SdMmcHcRwMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL1, FALSE, sizeof (HostCtrl1), &HostCtrl1);
+  } else {
+    ASSERT (FALSE);
+    return EFI_INVALID_PARAMETER;
+  }
+
+  return Status;
+}
+
+/**
+  Supply SD/MMC card with lowest clock frequency at initialization.
+
+  @param[in] PciIo          The PCI IO protocol instance.
+  @param[in] Slot           The slot number of the SD card to send the command to.
+  @param[in] Capability     The capability of the slot.
+
+  @retval EFI_SUCCESS       The clock is supplied successfully.
+  @retval Others            The clock isn't supplied successfully.
+
+**/
+EFI_STATUS
+SdMmcHcInitClockFreq (
+  IN EFI_PCI_IO_PROTOCOL    *PciIo,
+  IN UINT8                  Slot,
+  IN SD_MMC_HC_SLOT_CAP     Capability
+  )
+{
+  EFI_STATUS                Status;
+  UINT32                    InitFreq;
+
+  //
+  // Calculate a divisor for SD clock frequency
+  //
+  if (Capability.BaseClkFreq == 0) {
+    //
+    // Don't support get Base Clock Frequency information via another method
+    //
+    return EFI_UNSUPPORTED;
+  }
+  //
+  // Supply 400KHz clock frequency at initialization phase.
+  //
+  InitFreq = 400;
+  Status = SdMmcHcClockSupply (PciIo, Slot, InitFreq, Capability);
+  return Status;
+}
+
+/**
+  Supply SD/MMC card with maximum voltage at initialization.
+
+  Refer to SD Host Controller Simplified spec 3.0 Section 3.3 for details.
+
+  @param[in] PciIo          The PCI IO protocol instance.
+  @param[in] Slot           The slot number of the SD card to send the command to.
+  @param[in] Capability     The capability of the slot.
+
+  @retval EFI_SUCCESS       The voltage is supplied successfully.
+  @retval Others            The voltage isn't supplied successfully.
+
+**/
+EFI_STATUS
+SdMmcHcInitPowerVoltage (
+  IN EFI_PCI_IO_PROTOCOL    *PciIo,
+  IN UINT8                  Slot,
+  IN SD_MMC_HC_SLOT_CAP     Capability
+  )
+{
+  EFI_STATUS                Status;
+  UINT8                     MaxVoltage;
+  UINT8                     HostCtrl2;
+
+  //
+  // Calculate supported maximum voltage according to SD Bus Voltage Select
+  //
+  if (Capability.Voltage33 != 0) {
+    //
+    // Support 3.3V
+    //
+    MaxVoltage = 0x0E;
+  } else if (Capability.Voltage30 != 0) {
+    //
+    // Support 3.0V
+    //
+    MaxVoltage = 0x0C;
+  } else if (Capability.Voltage18 != 0) {
+    //
+    // Support 1.8V
+    //
+    MaxVoltage = 0x0A;
+    HostCtrl2  = BIT3;
+    Status = SdMmcHcOrMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL2, sizeof (HostCtrl2), &HostCtrl2);
+    gBS->Stall (5000);
+    if (EFI_ERROR (Status)) {
+      return Status;
+    }
+  } else {
+    ASSERT (FALSE);
+    return EFI_DEVICE_ERROR;
+  }
+
+  //
+  // Set SD Bus Voltage Select and SD Bus Power fields in Power Control Register
+  //
+  Status = SdMmcHcPowerControl (PciIo, Slot, MaxVoltage);
+
+  return Status;
+}
+
+/**
+  Initialize the Timeout Control register with most conservative value at initialization.
+
+  Refer to SD Host Controller Simplified spec 3.0 Section 2.2.15 for details.
+
+  @param[in] PciIo          The PCI IO protocol instance.
+  @param[in] Slot           The slot number of the SD card to send the command to.
+
+  @retval EFI_SUCCESS       The timeout control register is configured successfully.
+  @retval Others            The timeout control register isn't configured successfully.
+
+**/
+EFI_STATUS
+SdMmcHcInitTimeoutCtrl (
+  IN EFI_PCI_IO_PROTOCOL    *PciIo,
+  IN UINT8                  Slot
+  )
+{
+  EFI_STATUS                Status;
+  UINT8                     Timeout;
+
+  Timeout = 0x0E;
+  Status  = SdMmcHcRwMmio (PciIo, Slot, SD_MMC_HC_TIMEOUT_CTRL, FALSE, sizeof (Timeout), &Timeout);
+
+  return Status;
+}
+
+/**
+  Initial SD/MMC host controller with lowest clock frequency, max power and max timeout value
+  at initialization.
+
+  @param[in] PciIo          The PCI IO protocol instance.
+  @param[in] Slot           The slot number of the SD card to send the command to.
+  @param[in] Capability     The capability of the slot.
+
+  @retval EFI_SUCCESS       The host controller is initialized successfully.
+  @retval Others            The host controller isn't initialized successfully.
+
+**/
+EFI_STATUS
+SdMmcHcInitHost (
+  IN EFI_PCI_IO_PROTOCOL    *PciIo,
+  IN UINT8                  Slot,
+  IN SD_MMC_HC_SLOT_CAP     Capability
+  )
+{
+  EFI_STATUS       Status;
+
+  Status = SdMmcHcInitClockFreq (PciIo, Slot, Capability);
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+
+  Status = SdMmcHcInitPowerVoltage (PciIo, Slot, Capability);
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+
+  Status = SdMmcHcInitTimeoutCtrl (PciIo, Slot);
+  return Status;
+}
+
+/**
+  Turn on/off LED.
+
+  @param[in] PciIo          The PCI IO protocol instance.
+  @param[in] Slot           The slot number of the SD card to send the command to.
+  @param[in] On             The boolean to turn on/off LED.
+
+  @retval EFI_SUCCESS       The LED is turned on/off successfully.
+  @retval Others            The LED isn't turned on/off successfully.
+
+**/
+EFI_STATUS
+SdMmcHcLedOnOff (
+  IN EFI_PCI_IO_PROTOCOL    *PciIo,
+  IN UINT8                  Slot,
+  IN BOOLEAN                On
+  )
+{
+  EFI_STATUS                Status;
+  UINT8                     HostCtrl1;
+
+  if (On) {
+    HostCtrl1 = BIT0;
+    Status    = SdMmcHcOrMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL1, sizeof (HostCtrl1), &HostCtrl1);
+  } else {
+    HostCtrl1 = (UINT8)~BIT0;
+    Status    = SdMmcHcAndMmio (PciIo, Slot, SD_MMC_HC_HOST_CTRL1, sizeof (HostCtrl1), &HostCtrl1);
+  }
+
+  return Status;
+}
+
+/**
+  Build ADMA descriptor table for transfer.
+
+  Refer to SD Host Controller Simplified spec 3.0 Section 1.13 for details.
+
+  @param[in] Trb            The pointer to the SD_MMC_HC_TRB instance.
+
+  @retval EFI_SUCCESS       The ADMA descriptor table is created successfully.
+  @retval Others            The ADMA descriptor table isn't created successfully.
+
+**/
+EFI_STATUS
+BuildAdmaDescTable (
+  IN SD_MMC_HC_TRB          *Trb
+  )
+{
+  EFI_PHYSICAL_ADDRESS      Data;
+  UINT64                    DataLen;
+  UINT64                    Entries;
+  UINT32                    Index;
+  UINT64                    Remaining;
+  UINT32                    Address;
+  UINTN                     TableSize;
+  EFI_PCI_IO_PROTOCOL       *PciIo;
+  EFI_STATUS                Status;
+  UINTN                     Bytes;
+
+  Data    = Trb->DataPhy;
+  DataLen = Trb->DataLen;
+  PciIo   = Trb->Private->PciIo;
+  //
+  // Only support 32bit ADMA Descriptor Table
+  //
+  if ((Data >= 0x100000000ul) || ((Data + DataLen) > 0x100000000ul)) {
+    return EFI_INVALID_PARAMETER;
+  }
+  //
+  // Address field shall be set on 32-bit boundary (Lower 2-bit is always set to 0)
+  // for 32-bit address descriptor table.
+  //
+  if ((Data & (BIT0 | BIT1)) != 0) {
+    DEBUG ((DEBUG_INFO, "The buffer [0x%x] to construct ADMA desc is not aligned to 4 bytes boundary!\n", Data));
+  }
+
+  Entries   = DivU64x32 ((DataLen + ADMA_MAX_DATA_PER_LINE - 1), ADMA_MAX_DATA_PER_LINE);
+  TableSize = (UINTN)MultU64x32 (Entries, sizeof (SD_MMC_HC_ADMA_DESC_LINE));
+  Trb->AdmaPages = (UINT32)EFI_SIZE_TO_PAGES (TableSize);
+  Status = PciIo->AllocateBuffer (
+                    PciIo,
+                    AllocateAnyPages,
+                    EfiBootServicesData,
+                    EFI_SIZE_TO_PAGES (TableSize),
+                    (VOID **)&Trb->AdmaDesc,
+                    0
+                    );
+  if (EFI_ERROR (Status)) {
+    return EFI_OUT_OF_RESOURCES;
+  }
+  ZeroMem (Trb->AdmaDesc, TableSize);
+  Bytes  = TableSize;
+  Status = PciIo->Map (
+                    PciIo,
+                    EfiPciIoOperationBusMasterCommonBuffer,
+                    Trb->AdmaDesc,
+                    &Bytes,
+                    &Trb->AdmaDescPhy,
+                    &Trb->AdmaMap
+                    );
+
+  if (EFI_ERROR (Status) || (Bytes != TableSize)) {
+    //
+    // Map error or unable to map the whole RFis buffer into a contiguous region.
+    //
+    PciIo->FreeBuffer (
+             PciIo,
+             EFI_SIZE_TO_PAGES (TableSize),
+             Trb->AdmaDesc
+             );
+    return EFI_OUT_OF_RESOURCES;
+  }
+
+  if ((UINT64)(UINTN)Trb->AdmaDescPhy > 0x100000000ul) {
+    //
+    // The ADMA doesn't support 64bit addressing.
+    //
+    PciIo->Unmap (
+      PciIo,
+      Trb->AdmaMap
+    );
+    PciIo->FreeBuffer (
+      PciIo,
+      EFI_SIZE_TO_PAGES (TableSize),
+      Trb->AdmaDesc
+    );
+    return EFI_DEVICE_ERROR;
+  }
+
+  Remaining = DataLen;
+  Address   = (UINT32)Data;
+  for (Index = 0; Index < Entries; Index++) {
+    if (Remaining <= ADMA_MAX_DATA_PER_LINE) {
+      Trb->AdmaDesc[Index].Valid = 1;
+      Trb->AdmaDesc[Index].Act   = 2;
+      Trb->AdmaDesc[Index].Length  = (UINT16)Remaining;
+      Trb->AdmaDesc[Index].Address = Address;
+      break;
+    } else {
+      Trb->AdmaDesc[Index].Valid = 1;
+      Trb->AdmaDesc[Index].Act   = 2;
+      Trb->AdmaDesc[Index].Length  = 0;
+      Trb->AdmaDesc[Index].Address = Address;
+    }
+
+    Remaining -= ADMA_MAX_DATA_PER_LINE;
+    Address   += ADMA_MAX_DATA_PER_LINE;
+  }
+
+  //
+  // Set the last descriptor line as end of descriptor table
+  //
+  Trb->AdmaDesc[Index].End = 1;
+  return EFI_SUCCESS;
+}
+
+/**
+  Create a new TRB for the SD/MMC cmd request.
+
+  @param[in] Private        A pointer to the SD_MMC_HC_PRIVATE_DATA instance.
+  @param[in] Slot           The slot number of the SD card to send the command to.
+  @param[in] Packet         A pointer to the SD command data structure.
+  @param[in] Event          If Event is NULL, blocking I/O is performed. If Event is
+                            not NULL, then nonblocking I/O is performed, and Event
+                            will be signaled when the Packet completes.
+
+  @return Created Trb or NULL.
+
+**/
+SD_MMC_HC_TRB *
+SdMmcCreateTrb (
+  IN SD_MMC_HC_PRIVATE_DATA              *Private,
+  IN UINT8                               Slot,
+  IN EFI_SD_MMC_PASS_THRU_COMMAND_PACKET *Packet,
+  IN EFI_EVENT                           Event
+  )
+{
+  SD_MMC_HC_TRB                 *Trb;
+  EFI_STATUS                    Status;
+  EFI_TPL                       OldTpl;
+  EFI_PCI_IO_PROTOCOL_OPERATION Flag;
+  EFI_PCI_IO_PROTOCOL           *PciIo;
+  UINTN                         MapLength;
+
+  Trb = AllocateZeroPool (sizeof (SD_MMC_HC_TRB));
+  if (Trb == NULL) {
+    return NULL;
+  }
+
+  Trb->Signature = SD_MMC_HC_TRB_SIG;
+  Trb->Slot      = Slot;
+  Trb->BlockSize = 0x200;
+  Trb->Packet    = Packet;
+  Trb->Event     = Event;
+  Trb->Started   = FALSE;
+  Trb->Timeout   = Packet->Timeout;
+  Trb->Private   = Private;
+
+  if ((Packet->InTransferLength != 0) && (Packet->InDataBuffer != NULL)) {
+    Trb->Data    = Packet->InDataBuffer;
+    Trb->DataLen = Packet->InTransferLength;
+    Trb->Read    = TRUE;
+  } else if ((Packet->OutTransferLength != 0) && (Packet->OutDataBuffer != NULL)) {
+    Trb->Data    = Packet->OutDataBuffer;
+    Trb->DataLen = Packet->OutTransferLength;
+    Trb->Read    = FALSE;
+  } else if ((Packet->InTransferLength == 0) && (Packet->OutTransferLength == 0)) {
+    Trb->Data    = NULL;
+    Trb->DataLen = 0;
+  } else {
+    goto Error;
+  }
+
+  if (Trb->DataLen < Trb->BlockSize) {
+    Trb->BlockSize = (UINT16)Trb->DataLen;
+  }
+
+  if (((Private->Slot[Trb->Slot].CardType == EmmcCardType) &&
+       (Packet->SdMmcCmdBlk->CommandIndex == EMMC_SEND_TUNING_BLOCK)) ||
+      ((Private->Slot[Trb->Slot].CardType == SdCardType) &&
+       (Packet->SdMmcCmdBlk->CommandIndex == SD_SEND_TUNING_BLOCK))) {
+    Trb->Mode = SdMmcPioMode;
+  } else {
+    if (Trb->Read) {
+      Flag = EfiPciIoOperationBusMasterWrite;
+    } else {
+      Flag = EfiPciIoOperationBusMasterRead;
+    }
+
+    PciIo = Private->PciIo;
+    if (Trb->DataLen != 0) {
+      MapLength = Trb->DataLen;
+      Status = PciIo->Map (
+                        PciIo,
+                        Flag,
+                        Trb->Data,
+                        &MapLength,
+                        &Trb->DataPhy,
+                        &Trb->DataMap
+                        );
+      if (EFI_ERROR (Status) || (Trb->DataLen != MapLength)) {
+        Status = EFI_BAD_BUFFER_SIZE;
+        goto Error;
+      }
+    }
+
+    if (Trb->DataLen == 0) {
+      Trb->Mode = SdMmcNoData;
+    } else if (Private->Capability[Slot].Adma2 != 0) {
+      Trb->Mode = SdMmcAdmaMode;
+      Status = BuildAdmaDescTable (Trb);
+      if (EFI_ERROR (Status)) {
+        PciIo->Unmap (PciIo, Trb->DataMap);
+        goto Error;
+      }
+    } else if (Private->Capability[Slot].Sdma != 0) {
+      Trb->Mode = SdMmcSdmaMode;
+    } else {
+      Trb->Mode = SdMmcPioMode;
+    }
+  }
+
+  if (Event != NULL) {
+    OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
+    InsertTailList (&Private->Queue, &Trb->TrbList);
+    gBS->RestoreTPL (OldTpl);
+  }
+
+  return Trb;
+
+Error:
+  SdMmcFreeTrb (Trb);
+  return NULL;
+}
+
+/**
+  Free the resource used by the TRB.
+
+  @param[in] Trb            The pointer to the SD_MMC_HC_TRB instance.
+
+**/
+VOID
+SdMmcFreeTrb (
+  IN SD_MMC_HC_TRB           *Trb
+  )
+{
+  EFI_PCI_IO_PROTOCOL        *PciIo;
+
+  PciIo = Trb->Private->PciIo;
+
+  if (Trb->AdmaMap != NULL) {
+    PciIo->Unmap (
+      PciIo,
+      Trb->AdmaMap
+    );
+  }
+  if (Trb->AdmaDesc != NULL) {
+    PciIo->FreeBuffer (
+      PciIo,
+      Trb->AdmaPages,
+      Trb->AdmaDesc
+    );
+  }
+  if (Trb->DataMap != NULL) {
+    PciIo->Unmap (
+      PciIo,
+      Trb->DataMap
+    );
+  }
+  FreePool (Trb);
+  return;
+}
+
+/**
+  Check if the env is ready for execute specified TRB.
+
+  @param[in] Private        A pointer to the SD_MMC_HC_PRIVATE_DATA instance.
+  @param[in] Trb            The pointer to the SD_MMC_HC_TRB instance.
+
+  @retval EFI_SUCCESS       The env is ready for TRB execution.
+  @retval EFI_NOT_READY     The env is not ready for TRB execution.
+  @retval Others            Some erros happen.
+
+**/
+EFI_STATUS
+SdMmcCheckTrbEnv (
+  IN SD_MMC_HC_PRIVATE_DATA           *Private,
+  IN SD_MMC_HC_TRB                    *Trb
+  )
+{
+  EFI_STATUS                          Status;
+  EFI_SD_MMC_PASS_THRU_COMMAND_PACKET *Packet;
+  EFI_PCI_IO_PROTOCOL                 *PciIo;
+  UINT32                              PresentState;
+
+  Packet = Trb->Packet;
+
+  if ((Packet->SdMmcCmdBlk->CommandType == SdMmcCommandTypeAdtc) ||
+      (Packet->SdMmcCmdBlk->ResponseType == SdMmcResponseTypeR1b) ||
+      (Packet->SdMmcCmdBlk->ResponseType == SdMmcResponseTypeR5b)) {
+    //
+    // Wait Command Inhibit (CMD) and Command Inhibit (DAT) in
+    // the Present State register to be 0
+    //
+    PresentState = BIT0 | BIT1;
+  } else {
+    //
+    // Wait Command Inhibit (CMD) in the Present State register
+    // to be 0
+    //
+    PresentState = BIT0;
+  }
+
+  PciIo  = Private->PciIo;
+  Status = SdMmcHcCheckMmioSet (
+             PciIo,
+             Trb->Slot,
+             SD_MMC_HC_PRESENT_STATE,
+             sizeof (PresentState),
+             PresentState,
+             0
+             );
+
+  return Status;
+}
+
+/**
+  Wait for the env to be ready for execute specified TRB.
+
+  @param[in] Private        A pointer to the SD_MMC_HC_PRIVATE_DATA instance.
+  @param[in] Trb            The pointer to the SD_MMC_HC_TRB instance.
+
+  @retval EFI_SUCCESS       The env is ready for TRB execution.
+  @retval EFI_TIMEOUT       The env is not ready for TRB execution in time.
+  @retval Others            Some erros happen.
+
+**/
+EFI_STATUS
+SdMmcWaitTrbEnv (
+  IN SD_MMC_HC_PRIVATE_DATA           *Private,
+  IN SD_MMC_HC_TRB                    *Trb
+  )
+{
+  EFI_STATUS                          Status;
+  EFI_SD_MMC_PASS_THRU_COMMAND_PACKET *Packet;
+  UINT64                              Timeout;
+  BOOLEAN                             InfiniteWait;
+
+  //
+  // Wait Command Complete Interrupt Status bit in Normal Interrupt Status Register
+  //
+  Packet  = Trb->Packet;
+  Timeout = Packet->Timeout;
+  if (Timeout == 0) {
+    InfiniteWait = TRUE;
+  } else {
+    InfiniteWait = FALSE;
+  }
+
+  while (InfiniteWait || (Timeout > 0)) {
+    //
+    // Check Trb execution result by reading Normal Interrupt Status register.
+    //
+    Status = SdMmcCheckTrbEnv (Private, Trb);
+    if (Status != EFI_NOT_READY) {
+      return Status;
+    }
+    //
+    // Stall for 1 microsecond.
+    //
+    gBS->Stall (1);
+
+    Timeout--;
+  }
+
+  return EFI_TIMEOUT;
+}
+
+/**
+  Execute the specified TRB.
+
+  @param[in] Private        A pointer to the SD_MMC_HC_PRIVATE_DATA instance.
+  @param[in] Trb            The pointer to the SD_MMC_HC_TRB instance.
+
+  @retval EFI_SUCCESS       The TRB is sent to host controller successfully.
+  @retval Others            Some erros happen when sending this request to the host controller.
+
+**/
+EFI_STATUS
+SdMmcExecTrb (
+  IN SD_MMC_HC_PRIVATE_DATA           *Private,
+  IN SD_MMC_HC_TRB                    *Trb
+  )
+{
+  EFI_STATUS                          Status;
+  EFI_SD_MMC_PASS_THRU_COMMAND_PACKET *Packet;
+  EFI_PCI_IO_PROTOCOL                 *PciIo;
+  UINT16                              Cmd;
+  UINT16                              IntStatus;
+  UINT32                              Argument;
+  UINT16                              BlkCount;
+  UINT16                              BlkSize;
+  UINT16                              TransMode;
+  UINT8                               HostCtrl1;
+  UINT32                              SdmaAddr;
+  UINT64                              AdmaAddr;
+
+  Packet = Trb->Packet;
+  PciIo  = Trb->Private->PciIo;
+  //
+  // Clear all bits in Error Interrupt Status Register
+  //
+  IntStatus = 0xFFFF;
+  Status    = SdMmcHcRwMmio (PciIo, Trb->Slot, SD_MMC_HC_ERR_INT_STS, FALSE, sizeof (IntStatus), &IntStatus);
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+  //
+  // Clear all bits in Normal Interrupt Status Register excepts for Card Removal & Card Insertion bits.
+  //
+  IntStatus = 0xFF3F;
+  Status    = SdMmcHcRwMmio (PciIo, Trb->Slot, SD_MMC_HC_NOR_INT_STS, FALSE, sizeof (IntStatus), &IntStatus);
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+  //
+  // Set Host Control 1 register DMA Select field
+  //
+  if (Trb->Mode == SdMmcAdmaMode) {
+    HostCtrl1 = BIT4;
+    Status = SdMmcHcOrMmio (PciIo, Trb->Slot, SD_MMC_HC_HOST_CTRL1, sizeof (HostCtrl1), &HostCtrl1);
+    if (EFI_ERROR (Status)) {
+      return Status;
+    }
+  }
+
+  SdMmcHcLedOnOff (PciIo, Trb->Slot, TRUE);
+
+  if (Trb->Mode == SdMmcSdmaMode) {
+    if ((UINT64)(UINTN)Trb->DataPhy >= 0x100000000ul) {
+      return EFI_INVALID_PARAMETER;
+    }
+
+    SdmaAddr = (UINT32)(UINTN)Trb->DataPhy;
+    Status   = SdMmcHcRwMmio (PciIo, Trb->Slot, SD_MMC_HC_SDMA_ADDR, FALSE, sizeof (SdmaAddr), &SdmaAddr);
+    if (EFI_ERROR (Status)) {
+      return Status;
+    }
+  } else if (Trb->Mode == SdMmcAdmaMode) {
+    AdmaAddr = (UINT64)(UINTN)Trb->AdmaDescPhy;
+    Status   = SdMmcHcRwMmio (PciIo, Trb->Slot, SD_MMC_HC_ADMA_SYS_ADDR, FALSE, sizeof (AdmaAddr), &AdmaAddr);
+    if (EFI_ERROR (Status)) {
+      return Status;
+    }
+  }
+
+  BlkSize = Trb->BlockSize;
+  if (Trb->Mode == SdMmcSdmaMode) {
+    //
+    // Set SDMA boundary to be 512K bytes.
+    //
+    BlkSize |= 0x7000;
+  }
+
+  Status = SdMmcHcRwMmio (PciIo, Trb->Slot, SD_MMC_HC_BLK_SIZE, FALSE, sizeof (BlkSize), &BlkSize);
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+
+  BlkCount = 0;
+  if (Trb->Mode != SdMmcNoData) {
+    //
+    // Calcuate Block Count.
+    //
+    BlkCount = (UINT16)(Trb->DataLen / Trb->BlockSize);
+  }
+  Status   = SdMmcHcRwMmio (PciIo, Trb->Slot, SD_MMC_HC_BLK_COUNT, FALSE, sizeof (BlkCount), &BlkCount);
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+
+  Argument = Packet->SdMmcCmdBlk->CommandArgument;
+  Status   = SdMmcHcRwMmio (PciIo, Trb->Slot, SD_MMC_HC_ARG1, FALSE, sizeof (Argument), &Argument);
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+
+  TransMode = 0;
+  if (Trb->Mode != SdMmcNoData) {
+    if (Trb->Mode != SdMmcPioMode) {
+      TransMode |= BIT0;
+    }
+    if (Trb->Read) {
+      TransMode |= BIT4;
+    }
+    if (BlkCount > 1) {
+      TransMode |= BIT5 | BIT1;
+    }
+    //
+    // Only SD memory card needs to use AUTO CMD12 feature.
+    //
+    if (Private->Slot[Trb->Slot].CardType == SdCardType) {
+      if (BlkCount > 1) {
+        TransMode |= BIT2;
+      }
+    }
+  }
+
+  Status = SdMmcHcRwMmio (PciIo, Trb->Slot, SD_MMC_HC_TRANS_MOD, FALSE, sizeof (TransMode), &TransMode);
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+
+  Cmd = (UINT16)LShiftU64(Packet->SdMmcCmdBlk->CommandIndex, 8);
+  if (Packet->SdMmcCmdBlk->CommandType == SdMmcCommandTypeAdtc) {
+    Cmd |= BIT5;
+  }
+  //
+  // Convert ResponseType to value
+  //
+  if (Packet->SdMmcCmdBlk->CommandType != SdMmcCommandTypeBc) {
+    switch (Packet->SdMmcCmdBlk->ResponseType) {
+      case SdMmcResponseTypeR1:
+      case SdMmcResponseTypeR5:
+      case SdMmcResponseTypeR6:
+      case SdMmcResponseTypeR7:
+        Cmd |= (BIT1 | BIT3 | BIT4);
+        break;
+      case SdMmcResponseTypeR2:
+        Cmd |= (BIT0 | BIT3);
+       break;
+      case SdMmcResponseTypeR3:
+      case SdMmcResponseTypeR4:
+        Cmd |= BIT1;
+        break;
+      case SdMmcResponseTypeR1b:
+      case SdMmcResponseTypeR5b:
+        Cmd |= (BIT0 | BIT1 | BIT3 | BIT4);
+        break;
+      default:
+        ASSERT (FALSE);
+        break;
+    }
+  }
+  //
+  // Execute cmd
+  //
+  Status = SdMmcHcRwMmio (PciIo, Trb->Slot, SD_MMC_HC_COMMAND, FALSE, sizeof (Cmd), &Cmd);
+  return Status;
+}
+
+/**
+  Check the TRB execution result.
+
+  @param[in] Private        A pointer to the SD_MMC_HC_PRIVATE_DATA instance.
+  @param[in] Trb            The pointer to the SD_MMC_HC_TRB instance.
+
+  @retval EFI_SUCCESS       The TRB is executed successfully.
+  @retval EFI_NOT_READY     The TRB is not completed for execution.
+  @retval Others            Some erros happen when executing this request.
+
+**/
+EFI_STATUS
+SdMmcCheckTrbResult (
+  IN SD_MMC_HC_PRIVATE_DATA           *Private,
+  IN SD_MMC_HC_TRB                    *Trb
+  )
+{
+  EFI_STATUS                          Status;
+  EFI_SD_MMC_PASS_THRU_COMMAND_PACKET *Packet;
+  UINT16                              IntStatus;
+  UINT32                              Response[4];
+  UINT32                              SdmaAddr;
+  UINT8                               Index;
+  UINT8                               SwReset;
+  UINT32                              PioLength;
+
+  SwReset = 0;
+  Packet  = Trb->Packet;
+  //
+  // Check Trb execution result by reading Normal Interrupt Status register.
+  //
+  Status = SdMmcHcRwMmio (
+             Private->PciIo,
+             Trb->Slot,
+             SD_MMC_HC_NOR_INT_STS,
+             TRUE,
+             sizeof (IntStatus),
+             &IntStatus
+             );
+  if (EFI_ERROR (Status)) {
+    goto Done;
+  }
+  //
+  // Check Transfer Complete bit is set or not.
+  //
+  if ((IntStatus & BIT1) == BIT1) {
+    if ((IntStatus & BIT15) == BIT15) {
+      //
+      // Read Error Interrupt Status register to check if the error is
+      // Data Timeout Error.
+      // If yes, treat it as success as Transfer Complete has higher
+      // priority than Data Timeout Error.
+      //
+      Status = SdMmcHcRwMmio (
+                 Private->PciIo,
+                 Trb->Slot,
+                 SD_MMC_HC_ERR_INT_STS,
+                 TRUE,
+                 sizeof (IntStatus),
+                 &IntStatus
+                 );
+      if (!EFI_ERROR (Status)) {
+        if ((IntStatus & BIT4) == BIT4) {
+          Status = EFI_SUCCESS;
+        } else {
+          Status = EFI_DEVICE_ERROR;
+        }
+      }
+    }
+
+    goto Done;
+  }
+  //
+  // Check if there is a error happened during cmd execution.
+  // If yes, then do error recovery procedure to follow SD Host Controller
+  // Simplified Spec 3.0 section 3.10.1.
+  //
+  if ((IntStatus & BIT15) == BIT15) {
+    Status = SdMmcHcRwMmio (
+               Private->PciIo,
+               Trb->Slot,
+               SD_MMC_HC_ERR_INT_STS,
+               TRUE,
+               sizeof (IntStatus),
+               &IntStatus
+               );
+    if (EFI_ERROR (Status)) {
+      goto Done;
+    }
+    if ((IntStatus & 0x0F) != 0) {
+      SwReset |= BIT1;
+    }
+    if ((IntStatus & 0xF0) != 0) {
+      SwReset |= BIT2;
+    }
+
+    Status  = SdMmcHcRwMmio (
+                Private->PciIo,
+                Trb->Slot,
+                SD_MMC_HC_SW_RST,
+                FALSE,
+                sizeof (SwReset),
+                &SwReset
+                );
+    if (EFI_ERROR (Status)) {
+      goto Done;
+    }
+    Status = SdMmcHcWaitMmioSet (
+               Private->PciIo,
+               Trb->Slot,
+               SD_MMC_HC_SW_RST,
+               sizeof (SwReset),
+               0xFF,
+               0,
+               SD_MMC_HC_GENERIC_TIMEOUT
+               );
+    if (EFI_ERROR (Status)) {
+      goto Done;
+    }
+
+    Status = EFI_DEVICE_ERROR;
+    goto Done;
+  }
+  //
+  // Check if DMA interrupt is signalled for the SDMA transfer.
+  //
+  if ((Trb->Mode == SdMmcSdmaMode) && ((IntStatus & BIT3) == BIT3)) {
+    //
+    // Clear DMA interrupt bit.
+    //
+    IntStatus = BIT3;
+    Status    = SdMmcHcRwMmio (
+                  Private->PciIo,
+                  Trb->Slot,
+                  SD_MMC_HC_NOR_INT_STS,
+                  FALSE,
+                  sizeof (IntStatus),
+                  &IntStatus
+                  );
+    if (EFI_ERROR (Status)) {
+      goto Done;
+    }
+    //
+    // Update SDMA Address register.
+    //
+    SdmaAddr = SD_MMC_SDMA_ROUND_UP ((UINT32)(UINTN)Trb->DataPhy, SD_MMC_SDMA_BOUNDARY);
+    Status   = SdMmcHcRwMmio (
+                 Private->PciIo,
+                 Trb->Slot,
+                 SD_MMC_HC_SDMA_ADDR,
+                 FALSE,
+                 sizeof (UINT32),
+                 &SdmaAddr
+                 );
+    if (EFI_ERROR (Status)) {
+      goto Done;
+    }
+    Trb->DataPhy = (UINT32)(UINTN)SdmaAddr;
+  }
+
+  if ((Packet->SdMmcCmdBlk->CommandType != SdMmcCommandTypeAdtc) &&
+      (Packet->SdMmcCmdBlk->ResponseType != SdMmcResponseTypeR1b) &&
+      (Packet->SdMmcCmdBlk->ResponseType != SdMmcResponseTypeR5b)) {
+    if ((IntStatus & BIT0) == BIT0) {
+      Status = EFI_SUCCESS;
+      goto Done;
+    }
+  }
+
+  if (((Private->Slot[Trb->Slot].CardType == EmmcCardType) &&
+       (Packet->SdMmcCmdBlk->CommandIndex == EMMC_SEND_TUNING_BLOCK)) ||
+      ((Private->Slot[Trb->Slot].CardType == SdCardType) &&
+       (Packet->SdMmcCmdBlk->CommandIndex == SD_SEND_TUNING_BLOCK))) {
+    //
+    // When performing tuning procedure (Execute Tuning is set to 1) through PIO mode,
+    // wait Buffer Read Ready bit of Normal Interrupt Status Register to be 1.
+    // Refer to SD Host Controller Simplified Specification 3.0 figure 2-29 for details.
+    //
+    if ((IntStatus & BIT5) == BIT5) {
+      //
+      // Clear Buffer Read Ready interrupt at first.
+      //
+      IntStatus = BIT5;
+      SdMmcHcRwMmio (Private->PciIo, Trb->Slot, SD_MMC_HC_NOR_INT_STS, FALSE, sizeof (IntStatus), &IntStatus);
+      //
+      // Read data out from Buffer Port register
+      //
+      for (PioLength = 0; PioLength < Trb->DataLen; PioLength += 4) {
+        SdMmcHcRwMmio (Private->PciIo, Trb->Slot, SD_MMC_HC_BUF_DAT_PORT, TRUE, 4, (UINT8*)Trb->Data + PioLength);
+      }
+      Status = EFI_SUCCESS;
+      goto Done;
+    }
+  }
+
+  Status = EFI_NOT_READY;
+Done:
+  //
+  // Get response data when the cmd is executed successfully.
+  //
+  if (!EFI_ERROR (Status)) {
+    if (Packet->SdMmcCmdBlk->CommandType != SdMmcCommandTypeBc) {
+      for (Index = 0; Index < 4; Index++) {
+        Status = SdMmcHcRwMmio (
+                   Private->PciIo,
+                   Trb->Slot,
+                   SD_MMC_HC_RESPONSE + Index * 4,
+                   TRUE,
+                   sizeof (UINT32),
+                   &Response[Index]
+                   );
+        if (EFI_ERROR (Status)) {
+          SdMmcHcLedOnOff (Private->PciIo, Trb->Slot, FALSE);
+          return Status;
+        }
+      }
+      CopyMem (Packet->SdMmcStatusBlk, Response, sizeof (Response));
+    }
+  }
+
+  if (Status != EFI_NOT_READY) {
+    SdMmcHcLedOnOff (Private->PciIo, Trb->Slot, FALSE);
+  }
+
+  return Status;
+}
+
+/**
+  Wait for the TRB execution result.
+
+  @param[in] Private        A pointer to the SD_MMC_HC_PRIVATE_DATA instance.
+  @param[in] Trb            The pointer to the SD_MMC_HC_TRB instance.
+
+  @retval EFI_SUCCESS       The TRB is executed successfully.
+  @retval Others            Some erros happen when executing this request.
+
+**/
+EFI_STATUS
+SdMmcWaitTrbResult (
+  IN SD_MMC_HC_PRIVATE_DATA           *Private,
+  IN SD_MMC_HC_TRB                    *Trb
+  )
+{
+  EFI_STATUS                          Status;
+  EFI_SD_MMC_PASS_THRU_COMMAND_PACKET *Packet;
+  UINT64                              Timeout;
+  BOOLEAN                             InfiniteWait;
+
+  Packet = Trb->Packet;
+  //
+  // Wait Command Complete Interrupt Status bit in Normal Interrupt Status Register
+  //
+  Timeout = Packet->Timeout;
+  if (Timeout == 0) {
+    InfiniteWait = TRUE;
+  } else {
+    InfiniteWait = FALSE;
+  }
+
+  while (InfiniteWait || (Timeout > 0)) {
+    //
+    // Check Trb execution result by reading Normal Interrupt Status register.
+    //
+    Status = SdMmcCheckTrbResult (Private, Trb);
+    if (Status != EFI_NOT_READY) {
+      return Status;
+    }
+    //
+    // Stall for 1 microsecond.
+    //
+    gBS->Stall (1);
+
+    Timeout--;
+  }
+
+  return EFI_TIMEOUT;
+}
+
diff --git a/Drivers/SdMmc/Xenon/MvSdMmcPciHci.h b/Drivers/SdMmc/Xenon/MvSdMmcPciHci.h
new file mode 100644
index 0000000..fb62758
--- /dev/null
+++ b/Drivers/SdMmc/Xenon/MvSdMmcPciHci.h
@@ -0,0 +1,546 @@
+/** @file
+
+  Provides some data structure definitions used by the SD/MMC host controller driver.
+
+Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
+This program and the accompanying materials
+are licensed and made available under the terms and conditions of the BSD License
+which accompanies this distribution.  The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _SD_MMC_PCI_HCI_H_
+#define _SD_MMC_PCI_HCI_H_
+
+//
+// SD Host Controller SlotInfo Register Offset
+//
+#define SD_MMC_HC_SLOT_OFFSET         0x40
+
+#define SD_MMC_HC_MAX_SLOT            6
+
+//
+// SD Host Controller MMIO Register Offset
+//
+#define SD_MMC_HC_SDMA_ADDR           0x00
+#define SD_MMC_HC_ARG2                0x00
+#define SD_MMC_HC_BLK_SIZE            0x04
+#define SD_MMC_HC_BLK_COUNT           0x06
+#define SD_MMC_HC_ARG1                0x08
+#define SD_MMC_HC_TRANS_MOD           0x0C
+#define SD_MMC_HC_COMMAND             0x0E
+#define SD_MMC_HC_RESPONSE            0x10
+#define SD_MMC_HC_BUF_DAT_PORT        0x20
+#define SD_MMC_HC_PRESENT_STATE       0x24
+#define SD_MMC_HC_HOST_CTRL1          0x28
+#define SD_MMC_HC_POWER_CTRL          0x29
+#define SD_MMC_HC_BLK_GAP_CTRL        0x2A
+#define SD_MMC_HC_WAKEUP_CTRL         0x2B
+#define SD_MMC_HC_CLOCK_CTRL          0x2C
+#define SD_MMC_HC_TIMEOUT_CTRL        0x2E
+#define SD_MMC_HC_SW_RST              0x2F
+#define SD_MMC_HC_NOR_INT_STS         0x30
+#define SD_MMC_HC_ERR_INT_STS         0x32
+#define SD_MMC_HC_NOR_INT_STS_EN      0x34
+#define SD_MMC_HC_ERR_INT_STS_EN      0x36
+#define SD_MMC_HC_NOR_INT_SIG_EN      0x38
+#define SD_MMC_HC_ERR_INT_SIG_EN      0x3A
+#define SD_MMC_HC_AUTO_CMD_ERR_STS    0x3C
+#define SD_MMC_HC_HOST_CTRL2          0x3E
+#define SD_MMC_HC_CAP                 0x40
+#define SD_MMC_HC_MAX_CURRENT_CAP     0x48
+#define SD_MMC_HC_FORCE_EVT_AUTO_CMD  0x50
+#define SD_MMC_HC_FORCE_EVT_ERR_INT   0x52
+#define SD_MMC_HC_ADMA_ERR_STS        0x54
+#define SD_MMC_HC_ADMA_SYS_ADDR       0x58
+#define SD_MMC_HC_PRESET_VAL          0x60
+#define SD_MMC_HC_SHARED_BUS_CTRL     0xE0
+#define SD_MMC_HC_SLOT_INT_STS        0xFC
+#define SD_MMC_HC_CTRL_VER            0xFE
+
+//
+// The transfer modes supported by SD Host Controller
+// Simplified Spec 3.0 Table 1-2
+//
+typedef enum {
+  SdMmcNoData,
+  SdMmcPioMode,
+  SdMmcSdmaMode,
+  SdMmcAdmaMode
+} SD_MMC_HC_TRANSFER_MODE;
+
+//
+// The maximum data length of each descriptor line
+//
+#define ADMA_MAX_DATA_PER_LINE     0x10000
+
+typedef struct {
+  UINT32 Valid:1;
+  UINT32 End:1;
+  UINT32 Int:1;
+  UINT32 Reserved:1;
+  UINT32 Act:2;
+  UINT32 Reserved1:10;
+  UINT32 Length:16;
+  UINT32 Address;
+} SD_MMC_HC_ADMA_DESC_LINE;
+
+#define SD_MMC_SDMA_BOUNDARY          512 * 1024
+#define SD_MMC_SDMA_ROUND_UP(x, n)    (((x) + n) & ~(n - 1))
+
+typedef struct {
+  UINT8    FirstBar:3;        // bit 0:2
+  UINT8    Reserved:1;        // bit 3
+  UINT8    SlotNum:3;         // bit 4:6
+  UINT8    Reserved1:1;       // bit 7
+} SD_MMC_HC_SLOT_INFO;
+
+typedef struct {
+  UINT32   TimeoutFreq:6;     // bit 0:5
+  UINT32   Reserved:1;        // bit 6
+  UINT32   TimeoutUnit:1;     // bit 7
+  UINT32   BaseClkFreq:8;     // bit 8:15
+  UINT32   MaxBlkLen:2;       // bit 16:17
+  UINT32   BusWidth8:1;       // bit 18
+  UINT32   Adma2:1;           // bit 19
+  UINT32   Reserved2:1;       // bit 20
+  UINT32   HighSpeed:1;       // bit 21
+  UINT32   Sdma:1;            // bit 22
+  UINT32   SuspRes:1;         // bit 23
+  UINT32   Voltage33:1;       // bit 24
+  UINT32   Voltage30:1;       // bit 25
+  UINT32   Voltage18:1;       // bit 26
+  UINT32   Reserved3:1;       // bit 27
+  UINT32   SysBus64:1;        // bit 28
+  UINT32   AsyncInt:1;        // bit 29
+  UINT32   SlotType:2;        // bit 30:31
+  UINT32   Sdr50:1;           // bit 32
+  UINT32   Sdr104:1;          // bit 33
+  UINT32   Ddr50:1;           // bit 34
+  UINT32   Reserved4:1;       // bit 35
+  UINT32   DriverTypeA:1;     // bit 36
+  UINT32   DriverTypeC:1;     // bit 37
+  UINT32   DriverTypeD:1;     // bit 38
+  UINT32   DriverType4:1;     // bit 39
+  UINT32   TimerCount:4;      // bit 40:43
+  UINT32   Reserved5:1;       // bit 44
+  UINT32   TuningSDR50:1;     // bit 45
+  UINT32   RetuningMod:2;     // bit 46:47
+  UINT32   ClkMultiplier:8;   // bit 48:55
+  UINT32   Reserved6:7;       // bit 56:62
+  UINT32   Hs400:1;           // bit 63
+} SD_MMC_HC_SLOT_CAP;
+
+/**
+  Dump the content of SD/MMC host controller's Capability Register.
+
+  @param[in]  Slot            The slot number of the SD card to send the command to.
+  @param[in]  Capability      The buffer to store the capability data.
+
+**/
+VOID
+DumpCapabilityReg (
+  IN UINT8                Slot,
+  IN SD_MMC_HC_SLOT_CAP   *Capability
+  );
+
+/**
+  Read SlotInfo register from SD/MMC host controller pci config space.
+
+  @param[in]  PciIo        The PCI IO protocol instance.
+  @param[out] FirstBar     The buffer to store the first BAR value.
+  @param[out] SlotNum      The buffer to store the supported slot number.
+
+  @retval EFI_SUCCESS      The operation succeeds.
+  @retval Others           The operation fails.
+
+**/
+EFI_STATUS
+EFIAPI
+SdMmcHcGetSlotInfo (
+  IN     EFI_PCI_IO_PROTOCOL   *PciIo,
+     OUT UINT8                 *FirstBar,
+     OUT UINT8                 *SlotNum
+  );
+
+/**
+  Read/Write specified SD/MMC host controller mmio register.
+
+  @param[in]      PciIo        The PCI IO protocol instance.
+  @param[in]      BarIndex     The BAR index of the standard PCI Configuration
+                               header to use as the base address for the memory
+                               operation to perform.
+  @param[in]      Offset       The offset within the selected BAR to start the
+                               memory operation.
+  @param[in]      Read         A boolean to indicate it's read or write operation.
+  @param[in]      Count        The width of the mmio register in bytes.
+                               Must be 1, 2 , 4 or 8 bytes.
+  @param[in, out] Data         For read operations, the destination buffer to store
+                               the results. For write operations, the source buffer
+                               to write data from. The caller is responsible for
+                               having ownership of the data buffer and ensuring its
+                               size not less than Count bytes.
+
+  @retval EFI_INVALID_PARAMETER The PciIo or Data is NULL or the Count is not valid.
+  @retval EFI_SUCCESS           The read/write operation succeeds.
+  @retval Others                The read/write operation fails.
+
+**/
+EFI_STATUS
+EFIAPI
+SdMmcHcRwMmio (
+  IN     EFI_PCI_IO_PROTOCOL   *PciIo,
+  IN     UINT8                 BarIndex,
+  IN     UINT32                Offset,
+  IN     BOOLEAN               Read,
+  IN     UINT8                 Count,
+  IN OUT VOID                  *Data
+  );
+
+/**
+  Do OR operation with the value of the specified SD/MMC host controller mmio register.
+
+  @param[in] PciIo             The PCI IO protocol instance.
+  @param[in] BarIndex          The BAR index of the standard PCI Configuration
+                               header to use as the base address for the memory
+                               operation to perform.
+  @param[in] Offset            The offset within the selected BAR to start the
+                               memory operation.
+  @param[in] Count             The width of the mmio register in bytes.
+                               Must be 1, 2 , 4 or 8 bytes.
+  @param[in] OrData            The pointer to the data used to do OR operation.
+                               The caller is responsible for having ownership of
+                               the data buffer and ensuring its size not less than
+                               Count bytes.
+
+  @retval EFI_INVALID_PARAMETER The PciIo or OrData is NULL or the Count is not valid.
+  @retval EFI_SUCCESS           The OR operation succeeds.
+  @retval Others                The OR operation fails.
+
+**/
+EFI_STATUS
+EFIAPI
+SdMmcHcOrMmio (
+  IN  EFI_PCI_IO_PROTOCOL      *PciIo,
+  IN  UINT8                    BarIndex,
+  IN  UINT32                   Offset,
+  IN  UINT8                    Count,
+  IN  VOID                     *OrData
+  );
+
+/**
+  Do AND operation with the value of the specified SD/MMC host controller mmio register.
+
+  @param[in] PciIo             The PCI IO protocol instance.
+  @param[in] BarIndex          The BAR index of the standard PCI Configuration
+                               header to use as the base address for the memory
+                               operation to perform.
+  @param[in] Offset            The offset within the selected BAR to start the
+                               memory operation.
+  @param[in] Count             The width of the mmio register in bytes.
+                               Must be 1, 2 , 4 or 8 bytes.
+  @param[in] AndData           The pointer to the data used to do AND operation.
+                               The caller is responsible for having ownership of
+                               the data buffer and ensuring its size not less than
+                               Count bytes.
+
+  @retval EFI_INVALID_PARAMETER The PciIo or AndData is NULL or the Count is not valid.
+  @retval EFI_SUCCESS           The AND operation succeeds.
+  @retval Others                The AND operation fails.
+
+**/
+EFI_STATUS
+EFIAPI
+SdMmcHcAndMmio (
+  IN  EFI_PCI_IO_PROTOCOL      *PciIo,
+  IN  UINT8                    BarIndex,
+  IN  UINT32                   Offset,
+  IN  UINT8                    Count,
+  IN  VOID                     *AndData
+  );
+
+/**
+  Wait for the value of the specified MMIO register set to the test value.
+
+  @param[in]  PciIo         The PCI IO protocol instance.
+  @param[in]  BarIndex      The BAR index of the standard PCI Configuration
+                            header to use as the base address for the memory
+                            operation to perform.
+  @param[in]  Offset        The offset within the selected BAR to start the
+                            memory operation.
+  @param[in]  Count         The width of the mmio register in bytes.
+                            Must be 1, 2, 4 or 8 bytes.
+  @param[in]  MaskValue     The mask value of memory.
+  @param[in]  TestValue     The test value of memory.
+  @param[in]  Timeout       The time out value for wait memory set, uses 1
+                            microsecond as a unit.
+
+  @retval EFI_TIMEOUT       The MMIO register hasn't expected value in timeout
+                            range.
+  @retval EFI_SUCCESS       The MMIO register has expected value.
+  @retval Others            The MMIO operation fails.
+
+**/
+EFI_STATUS
+EFIAPI
+SdMmcHcWaitMmioSet (
+  IN  EFI_PCI_IO_PROTOCOL       *PciIo,
+  IN  UINT8                     BarIndex,
+  IN  UINT32                    Offset,
+  IN  UINT8                     Count,
+  IN  UINT64                    MaskValue,
+  IN  UINT64                    TestValue,
+  IN  UINT64                    Timeout
+  );
+
+/**
+  Software reset the specified SD/MMC host controller.
+
+  @param[in] PciIo          The PCI IO protocol instance.
+  @param[in] Slot           The slot number of the SD card to send the command to.
+
+  @retval EFI_SUCCESS       The software reset executes successfully.
+  @retval Others            The software reset fails.
+
+**/
+EFI_STATUS
+SdMmcHcReset (
+  IN EFI_PCI_IO_PROTOCOL    *PciIo,
+  IN UINT8                  Slot
+  );
+
+/**
+  Set all interrupt status bits in Normal and Error Interrupt Status Enable
+  register.
+
+  @param[in] PciIo          The PCI IO protocol instance.
+  @param[in] Slot           The slot number of the SD card to send the command to.
+
+  @retval EFI_SUCCESS       The operation executes successfully.
+  @retval Others            The operation fails.
+
+**/
+EFI_STATUS
+SdMmcHcEnableInterrupt (
+  IN EFI_PCI_IO_PROTOCOL    *PciIo,
+  IN UINT8                  Slot
+  );
+
+/**
+  Get the capability data from the specified slot.
+
+  @param[in]  PciIo           The PCI IO protocol instance.
+  @param[in]  Slot            The slot number of the SD card to send the command to.
+  @param[out] Capability      The buffer to store the capability data.
+
+  @retval EFI_SUCCESS         The operation executes successfully.
+  @retval Others              The operation fails.
+
+**/
+EFI_STATUS
+SdMmcHcGetCapability (
+  IN     EFI_PCI_IO_PROTOCOL  *PciIo,
+  IN     UINT8                Slot,
+     OUT SD_MMC_HC_SLOT_CAP   *Capability
+  );
+
+/**
+  Get the maximum current capability data from the specified slot.
+
+  @param[in]  PciIo           The PCI IO protocol instance.
+  @param[in]  Slot            The slot number of the SD card to send the command to.
+  @param[out] MaxCurrent      The buffer to store the maximum current capability data.
+
+  @retval EFI_SUCCESS         The operation executes successfully.
+  @retval Others              The operation fails.
+
+**/
+EFI_STATUS
+SdMmcHcGetMaxCurrent (
+  IN     EFI_PCI_IO_PROTOCOL  *PciIo,
+  IN     UINT8                Slot,
+     OUT UINT64               *MaxCurrent
+  );
+
+/**
+  Detect whether there is a SD/MMC card attached at the specified SD/MMC host controller
+  slot.
+
+  Refer to SD Host Controller Simplified spec 3.0 Section 3.1 for details.
+
+  @param[in]  PciIo         The PCI IO protocol instance.
+  @param[in]  Slot          The slot number of the SD card to send the command to.
+  @param[out] MediaPresent  The pointer to the media present boolean value.
+
+  @retval EFI_SUCCESS       There is no media change happened.
+  @retval EFI_MEDIA_CHANGED There is media change happened.
+  @retval Others            The detection fails.
+
+**/
+EFI_STATUS
+SdMmcHcCardDetect (
+  IN EFI_PCI_IO_PROTOCOL    *PciIo,
+  IN UINT8                  Slot,
+     OUT BOOLEAN            *MediaPresent
+  );
+
+/**
+  Stop SD/MMC card clock.
+
+  Refer to SD Host Controller Simplified spec 3.0 Section 3.2.2 for details.
+
+  @param[in] PciIo          The PCI IO protocol instance.
+  @param[in] Slot           The slot number of the SD card to send the command to.
+
+  @retval EFI_SUCCESS       Succeed to stop SD/MMC clock.
+  @retval Others            Fail to stop SD/MMC clock.
+
+**/
+EFI_STATUS
+SdMmcHcStopClock (
+  IN EFI_PCI_IO_PROTOCOL    *PciIo,
+  IN UINT8                  Slot
+  );
+
+/**
+  SD/MMC card clock supply.
+
+  Refer to SD Host Controller Simplified spec 3.0 Section 3.2.1 for details.
+
+  @param[in] PciIo          The PCI IO protocol instance.
+  @param[in] Slot           The slot number of the SD card to send the command to.
+  @param[in] ClockFreq      The max clock frequency to be set. The unit is KHz.
+  @param[in] Capability     The capability of the slot.
+
+  @retval EFI_SUCCESS       The clock is supplied successfully.
+  @retval Others            The clock isn't supplied successfully.
+
+**/
+EFI_STATUS
+SdMmcHcClockSupply (
+  IN EFI_PCI_IO_PROTOCOL    *PciIo,
+  IN UINT8                  Slot,
+  IN UINT64                 ClockFreq,
+  IN SD_MMC_HC_SLOT_CAP     Capability
+  );
+
+/**
+  SD/MMC bus power control.
+
+  Refer to SD Host Controller Simplified spec 3.0 Section 3.3 for details.
+
+  @param[in] PciIo          The PCI IO protocol instance.
+  @param[in] Slot           The slot number of the SD card to send the command to.
+  @param[in] PowerCtrl      The value setting to the power control register.
+
+  @retval TRUE              There is a SD/MMC card attached.
+  @retval FALSE             There is no a SD/MMC card attached.
+
+**/
+EFI_STATUS
+SdMmcHcPowerControl (
+  IN EFI_PCI_IO_PROTOCOL    *PciIo,
+  IN UINT8                  Slot,
+  IN UINT8                  PowerCtrl
+  );
+
+/**
+  Set the SD/MMC bus width.
+
+  Refer to SD Host Controller Simplified spec 3.0 Section 3.4 for details.
+
+  @param[in] PciIo          The PCI IO protocol instance.
+  @param[in] Slot           The slot number of the SD card to send the command to.
+  @param[in] BusWidth       The bus width used by the SD/MMC device, it must be 1, 4 or 8.
+
+  @retval EFI_SUCCESS       The bus width is set successfully.
+  @retval Others            The bus width isn't set successfully.
+
+**/
+EFI_STATUS
+SdMmcHcSetBusWidth (
+  IN EFI_PCI_IO_PROTOCOL    *PciIo,
+  IN UINT8                  Slot,
+  IN UINT16                 BusWidth
+  );
+
+/**
+  Supply SD/MMC card with lowest clock frequency at initialization.
+
+  @param[in] PciIo          The PCI IO protocol instance.
+  @param[in] Slot           The slot number of the SD card to send the command to.
+  @param[in] Capability     The capability of the slot.
+
+  @retval EFI_SUCCESS       The clock is supplied successfully.
+  @retval Others            The clock isn't supplied successfully.
+
+**/
+EFI_STATUS
+SdMmcHcInitClockFreq (
+  IN EFI_PCI_IO_PROTOCOL    *PciIo,
+  IN UINT8                  Slot,
+  IN SD_MMC_HC_SLOT_CAP     Capability
+  );
+
+/**
+  Supply SD/MMC card with maximum voltage at initialization.
+
+  Refer to SD Host Controller Simplified spec 3.0 Section 3.3 for details.
+
+  @param[in] PciIo          The PCI IO protocol instance.
+  @param[in] Slot           The slot number of the SD card to send the command to.
+  @param[in] Capability     The capability of the slot.
+
+  @retval EFI_SUCCESS       The voltage is supplied successfully.
+  @retval Others            The voltage isn't supplied successfully.
+
+**/
+EFI_STATUS
+SdMmcHcInitPowerVoltage (
+  IN EFI_PCI_IO_PROTOCOL    *PciIo,
+  IN UINT8                  Slot,
+  IN SD_MMC_HC_SLOT_CAP     Capability
+  );
+
+/**
+  Initialize the Timeout Control register with most conservative value at initialization.
+
+  Refer to SD Host Controller Simplified spec 3.0 Section 2.2.15 for details.
+
+  @param[in] PciIo          The PCI IO protocol instance.
+  @param[in] Slot           The slot number of the SD card to send the command to.
+
+  @retval EFI_SUCCESS       The timeout control register is configured successfully.
+  @retval Others            The timeout control register isn't configured successfully.
+
+**/
+EFI_STATUS
+SdMmcHcInitTimeoutCtrl (
+  IN EFI_PCI_IO_PROTOCOL    *PciIo,
+  IN UINT8                  Slot
+  );
+
+/**
+  Initial SD/MMC host controller with lowest clock frequency, max power and max timeout value
+  at initialization.
+
+  @param[in] PciIo          The PCI IO protocol instance.
+  @param[in] Slot           The slot number of the SD card to send the command to.
+  @param[in] Capability     The capability of the slot.
+
+  @retval EFI_SUCCESS       The host controller is initialized successfully.
+  @retval Others            The host controller isn't initialized successfully.
+
+**/
+EFI_STATUS
+SdMmcHcInitHost (
+  IN EFI_PCI_IO_PROTOCOL    *PciIo,
+  IN UINT8                  Slot,
+  IN SD_MMC_HC_SLOT_CAP     Capability
+  );
+
+#endif
-- 
1.8.3.1


    

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

[Linaro-uefi] [PATCH v2 2/5] Drivers/SdMmc: Import SdMmcPciHcDxe driver