From: Bartosz Szczepanek bsz@semihalf.com
MvEeprom driver produces MARVELL_EEPROM_PROTOCOL, which can be used by other drivers or applications. Working EFI_I2C_IO_PROTOCOL is required by driver to operate.
EEPROM devices' addresses need to be fed via 'PcdEepromI2cAddresses'.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Bartosz Szczepanek bsz@semihalf.com Signed-off-by: Marcin Wojtas mw@semihalf.com --- Documentation/Marvell/Drivers/EepromDriver.txt | 96 ++++++++ Drivers/I2c/Devices/MvEeprom/MvEeprom.c | 292 +++++++++++++++++++++++++ Drivers/I2c/Devices/MvEeprom/MvEeprom.h | 103 +++++++++ Drivers/I2c/Devices/MvEeprom/MvEeprom.inf | 70 ++++++ Platforms/Marvell/Include/Protocol/Eeprom.h | 60 +++++ Platforms/Marvell/Marvell.dec | 5 + 6 files changed, 626 insertions(+) create mode 100644 Documentation/Marvell/Drivers/EepromDriver.txt create mode 100644 Drivers/I2c/Devices/MvEeprom/MvEeprom.c create mode 100644 Drivers/I2c/Devices/MvEeprom/MvEeprom.h create mode 100644 Drivers/I2c/Devices/MvEeprom/MvEeprom.inf create mode 100644 Platforms/Marvell/Include/Protocol/Eeprom.h
diff --git a/Documentation/Marvell/Drivers/EepromDriver.txt b/Documentation/Marvell/Drivers/EepromDriver.txt new file mode 100644 index 0000000..e2da35f --- /dev/null +++ b/Documentation/Marvell/Drivers/EepromDriver.txt @@ -0,0 +1,96 @@ +1. Introduction +--------------- +**MvEeprom** driver creates MARVELL_EEPROM_PROTOCOL, which ++is used for managing eeprom. + +2. MvEeprom driver design +------------------------- +Every I2C device driver should implement EFI_DRIVER_BINDING_PROTOCOL and +consume EFI_I2C_IO_PROTOCOL for transactions on I2C bus. MvEeprom driver +additionally implements MARVELL_EEPROM_PROTOCOL. + + 2.1 EFI_DRIVER_BINDING_PROTOCOL + ------------------------------- + Driver Binding protocol is extensively covered in UEFI documentation, as + it is not specific to I2C stack. The only difference is that Supported() + function should check if EFI_I2C_IO_PROTOCOL provides valid EFI_GUID and + DeviceIndex values. + Excerpt from MvEepromSupported(): + + Status = gBS->OpenProtocol ( + ControllerHandle, + &gEfiI2cIoProtocolGuid, + (VOID **) &TmpI2cIo, + gImageHandle, + ControllerHandle, + EFI_OPEN_PROTOCOL_BY_DRIVER + ); + if (EFI_ERROR(Status)) { + return EFI_UNSUPPORTED; + } + + /* get EEPROM devices' addresses from PCD */ + EepromAddresses = PcdGetPtr (PcdEepromI2cAddresses); + if (EepromAddresses == 0) { + Status = EFI_UNSUPPORTED; + goto out; + } + + Status = EFI_UNSUPPORTED; + for (i = 0; EepromAddresses[i] != '\0'; i++) { + /* I2C guid must fit and valid DeviceIndex must be provided */ + if (CompareGuid(TmpI2cIo->DeviceGuid, &I2cGuid) && + TmpI2cIo->DeviceIndex == EepromAddresses[i]) { + DEBUG((DEBUG_INFO, "A8kEepromSupported: attached to EEPROM device\n")); + Status = EFI_SUCCESS; + break; + } + } + + 2.2 EFI_I2C_IO_PROTOCOL + ----------------------- + This protocol is provided by generic I2C stack. Multiple drivers can use IO + protocol at once, as queueing is implemented. + + QueueRequest is a routine that queues an I2C transaction to the I2C + controller for execution on the I2C bus. + + 2.3 MARVELL_EEPROM_PROTOCOL + ----------------------- + typedef struct _MARVELL_EEPROM_PROTOCOL MARVELL_EEPROM_PROTOCOL; + + #define EEPROM_READ 0x1 + #define EEPROM_WRITE 0x0 + typedef + EFI_STATUS + (EFIAPI *EFI_EEPROM_TRANSFER) ( + IN CONST MARVELL_EEPROM_PROTOCOL *This, + IN UINT16 Address, + IN UINT32 Length, + IN UINT8 *Buffer, + IN UINT8 Operation + ); + + struct _MARVELL_EEPROM_PROTOCOL { + EFI_EEPROM_TRANSFER Transfer; + UINT8 Identifier; + }; + +3. Adding new I2C slave device drivers +-------------------------------------- +In order to support I2C slave device other than EEPROM, new driver should +be created. Required steps follow. + + 1. Create driver directory (OpenPlatformPkg/Drivers/I2c/Devices/...). + 2. Create stubs of .inf and .c files (MvEeprom files are a reference), + include .inf file in platform .dsc and .fdf files. + 3. Implement EFI_DRIVER_BINDING_PROTOCOL - Start(), Stop(), Supported() + functions' implementation is a must. EFI_DRIVER_BINDING_PROTOCOL + should be installed at driver's entry point. + 4. Add I2C address of device to PcdI2cSlaveAddresses in .dsc file. + 5. Test available EFI_I2C_IO_PROTOCOLs in Supported() - find instance + with valid GUID and DeviceIndex (I2C slave address). + 6. Open EFI_I2C_IO_PROTOCOL for usage in Start(). After that, QueueRequest + function should be available. + 7. Implement core functionality of driver (using QueueRequest to access I2C). + 8. (not mandatory) Produce/consume additional protocols. diff --git a/Drivers/I2c/Devices/MvEeprom/MvEeprom.c b/Drivers/I2c/Devices/MvEeprom/MvEeprom.c new file mode 100644 index 0000000..d8fd1bf --- /dev/null +++ b/Drivers/I2c/Devices/MvEeprom/MvEeprom.c @@ -0,0 +1,292 @@ +/******************************************************************************** +Copyright (C) 2016 Marvell International Ltd. + +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + +* Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + +* Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#include <Protocol/DriverBinding.h> +#include <Protocol/I2cIo.h> +#include <Protocol/Eeprom.h> + +#include <Library/BaseLib.h> +#include <Library/BaseMemoryLib.h> +#include <Library/MemoryAllocationLib.h> +#include <Library/IoLib.h> +#include <Library/DebugLib.h> +#include <Library/PcdLib.h> +#include <Library/UefiLib.h> +#include <Library/UefiBootServicesTableLib.h> + +#include <Pi/PiI2c.h> + +#include "MvEeprom.h" + +#define I2C_DEVICE_INDEX(bus, address) (((address) & 0xffff) | (bus) << 16) + +STATIC CONST EFI_GUID I2cGuid = I2C_GUID; + +EFI_DRIVER_BINDING_PROTOCOL gDriverBindingProtocol = { + MvEepromSupported, + MvEepromStart, + MvEepromStop +}; + +EFI_STATUS +EFIAPI +MvEepromSupported ( + IN EFI_DRIVER_BINDING_PROTOCOL *This, + IN EFI_HANDLE ControllerHandle, + IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath OPTIONAL + ) +{ + EFI_STATUS Status = EFI_UNSUPPORTED; + EFI_I2C_IO_PROTOCOL *TmpI2cIo; + UINT8 *EepromAddresses; + UINT8 *EepromBuses; + UINTN i; + + Status = gBS->OpenProtocol ( + ControllerHandle, + &gEfiI2cIoProtocolGuid, + (VOID **) &TmpI2cIo, + gImageHandle, + ControllerHandle, + EFI_OPEN_PROTOCOL_BY_DRIVER + ); + if (EFI_ERROR(Status)) { + return EFI_UNSUPPORTED; + } + + /* get EEPROM devices' addresses from PCD */ + EepromAddresses = PcdGetPtr (PcdEepromI2cAddresses); + EepromBuses = PcdGetPtr (PcdEepromI2cBuses); + if (EepromAddresses == 0) { + Status = EFI_UNSUPPORTED; + DEBUG((DEBUG_INFO, "MvEepromSupported: I2C device found, but it's not EEPROM\n")); + goto out; + } + + Status = EFI_UNSUPPORTED; + for (i = 0; EepromAddresses[i] != '\0'; i++) { + /* I2C guid must fit and valid DeviceIndex must be provided */ + if (CompareGuid(TmpI2cIo->DeviceGuid, &I2cGuid) && + TmpI2cIo->DeviceIndex == I2C_DEVICE_INDEX(EepromBuses[i], + EepromAddresses[i])) { + DEBUG((DEBUG_INFO, "MvEepromSupported: attached to EEPROM device\n")); + Status = EFI_SUCCESS; + break; + } + } + +out: + gBS->CloseProtocol ( + ControllerHandle, + &gEfiI2cIoProtocolGuid, + gImageHandle, + ControllerHandle + ); + return Status; +} + +EFI_STATUS +EFIAPI +MvEepromTransfer ( + IN CONST MARVELL_EEPROM_PROTOCOL *This, + IN UINT16 Address, + IN UINT32 Length, + IN UINT8 *Buffer, + IN UINT8 Operation + ) +{ + EFI_I2C_REQUEST_PACKET *RequestPacket; + UINTN RequestPacketSize; + EFI_STATUS Status = EFI_SUCCESS; + EEPROM_CONTEXT *EepromContext = EEPROM_SC_FROM_EEPROM(This); + UINT32 BufferLength; + UINT32 Transmitted = 0; + UINT32 CurrentAddress = Address; + + ASSERT(EepromContext != NULL); + ASSERT(EepromContext->I2cIo != NULL); + + RequestPacketSize = sizeof(UINTN) + sizeof (EFI_I2C_OPERATION) * 2; + RequestPacket = AllocateZeroPool (RequestPacketSize); + if (RequestPacket == NULL) + return EFI_OUT_OF_RESOURCES; + /* First operation contains address, the second is buffer */ + RequestPacket->OperationCount = 2; + RequestPacket->Operation[0].LengthInBytes = 2; + RequestPacket->Operation[0].Buffer = AllocateZeroPool ( RequestPacket->Operation[0].LengthInBytes ); + if (RequestPacket->Operation[0].Buffer == NULL) { + FreePool(RequestPacket); + return EFI_OUT_OF_RESOURCES; + } + RequestPacket->Operation[1].Flags = (Operation == EEPROM_READ ? I2C_FLAG_READ : I2C_FLAG_NORESTART); + + while (Length > 0) { + CurrentAddress = Address + Transmitted; + BufferLength = (Length <= MAX_BUFFER_LENGTH ? Length : MAX_BUFFER_LENGTH); + RequestPacket->Operation[0].Buffer[0] = (CurrentAddress >> 8) & 0xff; + RequestPacket->Operation[0].Buffer[1] = CurrentAddress & 0xff; + RequestPacket->Operation[1].LengthInBytes = BufferLength; + RequestPacket->Operation[1].Buffer = Buffer + Transmitted; + Status = EepromContext->I2cIo->QueueRequest(EepromContext->I2cIo, 0, NULL, RequestPacket, NULL); + if (EFI_ERROR(Status)) { + DEBUG((DEBUG_ERROR, "MvEepromTransfer: error %d during transmission\n", Status)); + break; + } + Length -= BufferLength; + Transmitted += BufferLength; + } + + FreePool(RequestPacket->Operation[0].Buffer); + FreePool(RequestPacket); + return Status; +} + +EFI_STATUS +EFIAPI +MvEepromStart ( + IN EFI_DRIVER_BINDING_PROTOCOL *This, + IN EFI_HANDLE ControllerHandle, + IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath OPTIONAL + ) +{ + EFI_STATUS Status = EFI_SUCCESS; + EEPROM_CONTEXT *EepromContext; + + EepromContext = AllocateZeroPool (sizeof(EEPROM_CONTEXT)); + if (EepromContext == NULL) { + DEBUG((DEBUG_ERROR, "MvEeprom: allocation fail\n")); + return EFI_OUT_OF_RESOURCES; + } + + EepromContext->ControllerHandle = ControllerHandle; + EepromContext->Signature = EEPROM_SIGNATURE; + EepromContext->EepromProtocol.Transfer = MvEepromTransfer; + + Status = gBS->OpenProtocol ( + ControllerHandle, + &gEfiI2cIoProtocolGuid, + (VOID **) &EepromContext->I2cIo, + gImageHandle, + ControllerHandle, + EFI_OPEN_PROTOCOL_BY_DRIVER + ); + if (EFI_ERROR(Status)) { + DEBUG((DEBUG_ERROR, "MvEeprom: failed to open I2cIo\n")); + FreePool(EepromContext); + return EFI_UNSUPPORTED; + } + + EepromContext->EepromProtocol.Identifier = EepromContext->I2cIo->DeviceIndex; + Status = gBS->InstallMultipleProtocolInterfaces ( + &ControllerHandle, + &gMarvellEepromProtocolGuid, &EepromContext->EepromProtocol, + NULL + ); + if (EFI_ERROR(Status)) { + DEBUG((DEBUG_ERROR, "MvEeprom: failed to install EEPROM protocol\n")); + goto fail; + } + + return Status; + +fail: + FreePool(EepromContext); + gBS->CloseProtocol ( + ControllerHandle, + &gEfiI2cIoProtocolGuid, + gImageHandle, + ControllerHandle + ); + + return Status; +} + +EFI_STATUS +EFIAPI +MvEepromStop ( + IN EFI_DRIVER_BINDING_PROTOCOL *This, + IN EFI_HANDLE ControllerHandle, + IN UINTN NumberOfChildren, + IN EFI_HANDLE *ChildHandleBuffer OPTIONAL + ) +{ + MARVELL_EEPROM_PROTOCOL *EepromProtocol; + EFI_STATUS Status; + EEPROM_CONTEXT *EepromContext; + + Status = gBS->OpenProtocol ( + ControllerHandle, + &gMarvellEepromProtocolGuid, + (VOID **) &EepromProtocol, + This->DriverBindingHandle, + ControllerHandle, + EFI_OPEN_PROTOCOL_GET_PROTOCOL + ); + + if (EFI_ERROR (Status)) { + return EFI_DEVICE_ERROR; + } + EepromContext = EEPROM_SC_FROM_EEPROM(EepromProtocol); + + gBS->UninstallMultipleProtocolInterfaces ( + &ControllerHandle, + &gMarvellEepromProtocolGuid, &EepromContext->EepromProtocol, + &gEfiDriverBindingProtocolGuid, &gDriverBindingProtocol, + NULL + ); + gBS->CloseProtocol ( + ControllerHandle, + &gEfiI2cIoProtocolGuid, + gImageHandle, + ControllerHandle + ); + FreePool(EepromContext); + return EFI_SUCCESS; +} + +EFI_STATUS +EFIAPI +MvEepromInitialise ( + IN EFI_HANDLE ImageHandle, + IN EFI_SYSTEM_TABLE *SystemTable + ) +{ + EFI_STATUS Status; + Status = gBS->InstallMultipleProtocolInterfaces ( + &ImageHandle, + &gEfiDriverBindingProtocolGuid, &gDriverBindingProtocol, + NULL + ); + return Status; +} diff --git a/Drivers/I2c/Devices/MvEeprom/MvEeprom.h b/Drivers/I2c/Devices/MvEeprom/MvEeprom.h new file mode 100644 index 0000000..b1af645 --- /dev/null +++ b/Drivers/I2c/Devices/MvEeprom/MvEeprom.h @@ -0,0 +1,103 @@ +/******************************************************************************** +Copyright (C) 2016 Marvell International Ltd. + +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + +* Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + +* Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#ifndef __MV_EEPROM_H__ +#define __MV_EEPROM_H__ + +#include <Uefi.h> + +#define EEPROM_SIGNATURE SIGNATURE_32 ('E', 'E', 'P', 'R') + +#define MAX_BUFFER_LENGTH 64 + +/* + * I2C_FLAG_NORESTART is not part of PI spec, it allows to continue + * transmission without repeated start operation. + * FIXME: This flag is also defined in Drivers/I2c/MvI2cDxe/MvI2cDxe.h + * and it's important to have both version synced. This solution is + * temporary and shared flag should be used by both files. + * Situation is analogous with I2C_GUID, which also should be common, but is + * for now defined same way in two header files. + */ +#define I2C_FLAG_NORESTART 0x00000002 +#define I2C_GUID \ + { \ + 0xadc1901b, 0xb83c, 0x4831, { 0x8f, 0x59, 0x70, 0x89, 0x8f, 0x26, 0x57, 0x1e } \ + } + +typedef struct { + UINT32 Signature; + EFI_HANDLE ControllerHandle; + EFI_I2C_IO_PROTOCOL *I2cIo; + MARVELL_EEPROM_PROTOCOL EepromProtocol; +} EEPROM_CONTEXT; + +#define EEPROM_SC_FROM_IO(a) CR (a, EEPROM_CONTEXT, I2cIo, EEPROM_SIGNATURE) +#define EEPROM_SC_FROM_EEPROM(a) CR (a, EEPROM_CONTEXT, EepromProtocol, EEPROM_SIGNATURE) + +EFI_STATUS +EFIAPI +MvEepromSupported ( + IN EFI_DRIVER_BINDING_PROTOCOL *This, + IN EFI_HANDLE ControllerHandle, + IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath OPTIONAL + ); + +EFI_STATUS +EFIAPI +MvEepromStart ( + IN EFI_DRIVER_BINDING_PROTOCOL *This, + IN EFI_HANDLE ControllerHandle, + IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath OPTIONAL + ); + +EFI_STATUS +EFIAPI +MvEepromStop ( + IN EFI_DRIVER_BINDING_PROTOCOL *This, + IN EFI_HANDLE ControllerHandle, + IN UINTN NumberOfChildren, + IN EFI_HANDLE *ChildHandleBuffer OPTIONAL + ); + +EFI_STATUS +EFIAPI +MvEepromTransfer ( + IN CONST MARVELL_EEPROM_PROTOCOL *This, + IN UINT16 Address, + IN UINT32 Length, + IN UINT8 *Buffer, + IN UINT8 Operation + ); +#endif // __MV_EEPROM_H__ diff --git a/Drivers/I2c/Devices/MvEeprom/MvEeprom.inf b/Drivers/I2c/Devices/MvEeprom/MvEeprom.inf new file mode 100644 index 0000000..219041b --- /dev/null +++ b/Drivers/I2c/Devices/MvEeprom/MvEeprom.inf @@ -0,0 +1,70 @@ +# +# Marvell BSD License Option +# +# If you received this File from Marvell, you may opt to use, redistribute +# and/or modify this File under the following licensing terms. +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are met: +# +# * Redistributions of source code must retain the above copyright notice, +# this list of conditions and the following disclaimer. +# +# * Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in the +# documentation and/or other materials provided with the distribution. +# +# * Neither the name of Marvell nor the names of its contributors may be +# used to endorse or promote products derived from this software without +# specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE +# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +# CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +# OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# + +[Defines] + INF_VERSION = 0x00010005 + BASE_NAME = MvEeprom + FILE_GUID = 59fc3843-d8d4-40aa-ae07-38967138509c + MODULE_TYPE = DXE_DRIVER + VERSION_STRING = 1.0 + ENTRY_POINT = MvEepromInitialise + +[Sources.common] + MvEeprom.c + +[Packages] + MdePkg/MdePkg.dec + MdeModulePkg/MdeModulePkg.dec + ArmPlatformPkg/ArmPlatformPkg.dec + ArmPkg/ArmPkg.dec + OpenPlatformPkg/Platforms/Marvell/Marvell.dec + +[LibraryClasses] + IoLib + PcdLib + BaseLib + BaseMemoryLib + DebugLib + UefiLib + UefiDriverEntryPoint + UefiBootServicesTableLib + +[Protocols] + gEfiI2cIoProtocolGuid + gEfiDriverBindingProtocolGuid + gMarvellEepromProtocolGuid + +[Pcd] + gMarvellTokenSpaceGuid.PcdEepromI2cAddresses + gMarvellTokenSpaceGuid.PcdEepromI2cBuses + +[Depex] + TRUE diff --git a/Platforms/Marvell/Include/Protocol/Eeprom.h b/Platforms/Marvell/Include/Protocol/Eeprom.h new file mode 100644 index 0000000..2708f7d --- /dev/null +++ b/Platforms/Marvell/Include/Protocol/Eeprom.h @@ -0,0 +1,60 @@ +/******************************************************************************** +Copyright (C) 2016 Marvell International Ltd. + +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + +* Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + +* Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#ifndef __MARVELL_EEPROM_H__ +#define __MARVELL_EEPROM_H__ + +#define MARVELL_EEPROM_PROTOCOL_GUID { 0xcd728a1f, 0x45b5, 0x4feb, { 0x98, 0xc8, 0x31, 0x3d, 0xa8, 0x11, 0x74, 0x62 }} + +typedef struct _MARVELL_EEPROM_PROTOCOL MARVELL_EEPROM_PROTOCOL; + +#define EEPROM_READ 0x1 +#define EEPROM_WRITE 0x0 +typedef +EFI_STATUS +(EFIAPI *EFI_EEPROM_TRANSFER) ( + IN CONST MARVELL_EEPROM_PROTOCOL *This, + IN UINT16 Address, + IN UINT32 Length, + IN UINT8 *Buffer, + IN UINT8 Operation + ); + +struct _MARVELL_EEPROM_PROTOCOL { + EFI_EEPROM_TRANSFER Transfer; + UINT32 Identifier; +}; + +extern EFI_GUID gMarvellEepromProtocolGuid; +#endif diff --git a/Platforms/Marvell/Marvell.dec b/Platforms/Marvell/Marvell.dec index 6738116..bc4ac7a 100644 --- a/Platforms/Marvell/Marvell.dec +++ b/Platforms/Marvell/Marvell.dec @@ -107,8 +107,13 @@ #I2C gMarvellTokenSpaceGuid.PcdI2cSlaveAddresses|{ 0 }|VOID*|0x3000046 gMarvellTokenSpaceGuid.PcdI2cSlaveBuses|{ 0 }|VOID*|0x3000184 + gMarvellTokenSpaceGuid.PcdEepromI2cAddresses|{ 0 }|VOID*|0x3000050 + gMarvellTokenSpaceGuid.PcdEepromI2cBuses|{ 0 }|VOID*|0x3000185 gMarvellTokenSpaceGuid.PcdI2cBaseAddresses|{ 0 }|VOID*|0x3000047 gMarvellTokenSpaceGuid.PcdI2cClockFrequency|0|UINT32|0x3000048 gMarvellTokenSpaceGuid.PcdI2cBaudRate|0|UINT32|0x3000049 gMarvellTokenSpaceGuid.PcdI2cBusCount|0|UINT32|0x3000183
+[Protocols] + gMarvellEepromProtocolGuid = { 0xcd728a1f, 0x45b5, 0x4feb, { 0x98, 0xc8, 0x31, 0x3d, 0xa8, 0x11, 0x74, 0x62 }} +