Hi Leif and Roy,
Thank you very much for your help! 1.I have changed the setting,but it cannot work either,the log’s as follows: ----------------------------------------------------------------------------------------- The default boot selection will start in 10 seconds [1] Ramdisk - VenMsg(06ED4DD0-FF78-11D3-BDC4-00A0C94053D1,0000000000000000)/uImage - Initrd: VenMsg(06ED4DD0-FF78-11D3-BDC4-00A0C94053D1,0000000000000000)/ initrd - Arguments: mem=256M console=ttyAMA0,9600 - LoaderType: Linux kernel with ATAG data ----------------------- Global FDT Config - not configured ----------------------- [a] Boot Manager [b] EBL [c] GO Start: a [1] Add Boot Device Entry [2] Update Boot Device Entry [3] Remove Boot Device Entry [4] Update FDT path [5] Return to main menu Choice: 1 [1] (29 MB) - VenMsg(06ED4DD0-FF78-11D3-BDC4-00A0C94053D1,0000000000000000) [2] (978 MB) - Pci(0x0,0x0)/Sata(0x0,0x0,0x0)/HD(1,MBR,0x00000000,0x3F,0x1EA3FE) [3] (978 MB) - Pci(0x0,0x0)/Sata(0x0,0x0,0x0)/HD(2,MBR,0x00000000,0x1EA43D,0x1EA43D) [4] (978 MB) - Pci(0x0,0x0)/Sata(0x0,0x0,0x0)/HD(3,MBR,0x00000000,0x3D487A,0x1EA43D) [5] VenMsg(06ED4DD0-FF78-11D3-BDC4-00A0C94053D1,0000000000000000) - VenMsg(06ED4DD0-FF78-11D3-BDC4-00A0C94053D1,0000000000000000) [6] PXE on MAC Address: 0E:00:FF:0C:FF:FE - MAC(0E00FF0CFFFE,0x1) [7] TFTP on MAC Address: 0E:00:FF:0C:FF:FE - MAC(0E00FF0CFFFE,0x1) Select the Boot Device: 7 Get the IP address from DHCP: [y/n] y Get the TFTP server IP address: 192.168.10.100 File path of the EFI Application or the kernel : zImage Is an EFI Application? [y/n] y Is your application is an OS loader? [y/n] y Description for this new Entry: OS [1] Add Boot Device Entry [2] Update Boot Device Entry [3] Remove Boot Device Entry [4] Update FDT path [5] Return to main menu Choice: 5 [1] Ramdisk - VenMsg(06ED4DD0-FF78-11D3-BDC4-00A0C94053D1,0000000000000000)/uImage - Initrd: VenMsg(06ED4DD0-FF78-11D3-BDC4-00A0C94053D1,0000000000000000)/ initrd - Arguments: mem=256M console=ttyAMA0,9600 - LoaderType: Linux kernel with ATAG data [2] OS - MAC(0E00FF0CFFFE,0x1)/IPv4(192.168.10.100) - LoaderType: EFI Application ----------------------- Global FDT Config - not configured ----------------------- [a] Boot Manager [b] EBL [c] GO Start: 2 AllocatePoolPages: failed to allocate 322561 pages AllocatePool: failed to allocate 1321205792 bytes AllocatePoolPages: failed to allocate 322561 pages AllocatePool: failed to allocate 1321205792 bytes AllocatePoolPages: failed to allocate 322561 pages -----------------------------------------------------------------------------------------
2.There’s no ‘ping’ command in our shell,but we can use the command of ‘ifconfig’ to configure IP of board: ----------------------------------------------------------------------------------------- D01 >cd fs0: D01 fs0:>dir D01 fs0:>ifconfig -s eth0 192.168.10.50 255.255.255.0 192.168.10.1 Please wait...................................... Your console may stop responding for a while .... The default address is: 192.168.10.50 D01 fs0:>provision 192.168.10.100 -u admin -p admin -f D01.fd Please select the destination disk partition: 1.Label founded succ is 0x6C282010 2.Label founded succ is 0x6C282010 3.Label founded succ is 0x6C282010 4.Label founded succ is 0x6C282010 Please input the index(or input 'q' to quit):1 Connected to the ftp server. Download file D01.fd from server. ### CurFileSize = 100000 Download file D01.fd succ! D01 fs0:>dir <DIR> boot D01 fs0:>cd boot D01 fs0:\boot>dir <DIR> . <DIR> .. 1,048,576 D01.fd D01 fs0:\boot> ----------------------------------------------------------------------------------------- I am sure that the network is OK,because the board can download files from PC which it connect to. At the same time,the board can boot kernel by PXE: ----------------------------------------------------------------------------------------- [1] Ramdisk - VenMsg(06ED4DD0-FF78-11D3-BDC4-00A0C94053D1,0000000000000000)/uImage - Initrd: VenMsg(06ED4DD0-FF78-11D3-BDC4-00A0C94053D1,0000000000000000)/ initrd - Arguments: mem=256M console=ttyAMA0,9600 - LoaderType: Linux kernel with ATAG data ----------------------- Global FDT Config - not configured ----------------------- [a] Boot Manager [b] EBL [c] GO Start: a [1] Add Boot Device Entry [2] Update Boot Device Entry [3] Remove Boot Device Entry [4] Update FDT path [5] Return to main menu Choice: 1 [1] (29 MB) - VenMsg(06ED4DD0-FF78-11D3-BDC4-00A0C94053D1,0000000000000000) [2] (978 MB) - Pci(0x0,0x0)/Sata(0x0,0x0,0x0)/HD(1,MBR,0x00000000,0x3F,0x1EA3FE) [3] (978 MB) - Pci(0x0,0x0)/Sata(0x0,0x0,0x0)/HD(2,MBR,0x00000000,0x1EA43D,0x1EA43D) [4] (978 MB) - Pci(0x0,0x0)/Sata(0x0,0x0,0x0)/HD(3,MBR,0x00000000,0x3D487A,0x1EA43D) [5] VenMsg(06ED4DD0-FF78-11D3-BDC4-00A0C94053D1,0000000000000000) - VenMsg(06ED4DD0-FF78-11D3-BDC4-00A0C94053D1,0000000000000000) [6] PXE on MAC Address: 0E:00:FF:0C:FF:FE - MAC(0E00FF0CFFFE,0x1) [7] TFTP on MAC Address: 0E:00:FF:0C:FF:FE - MAC(0E00FF0CFFFE,0x1) Select the Boot Device: 6 Description for this new Entry: PXe [1] Add Boot Device Entry [2] Update Boot Device Entry [3] Remove Boot Device Entry [4] Update FDT path [5] Return to main menu Choice: 5 [1] Ramdisk - VenMsg(06ED4DD0-FF78-11D3-BDC4-00A0C94053D1,0000000000000000)/uImage - Initrd: VenMsg(06ED4DD0-FF78-11D3-BDC4-00A0C94053D1,0000000000000000)/ initrd - Arguments: mem=256M console=ttyAMA0,9600 - LoaderType: Linux kernel with ATAG data [2] PXe - MAC(0E00FF0CFFFE,0x1) - LoaderType: EFI Application ----------------------- Global FDT Config - not configured ----------------------- [a] Boot Manager [b] EBL [c] GO Start: 2 [DJ]: BdsFileSystemSupport : 397 [DJ]: BdsFirmwareVolumeSupport : 535 [DJ]: BdsMemoryMapSupport : 480 ..Loading driver at 0x0006ACDA000 EntryPoint=0x0006ACDA400 Welcome to GRUB! ----------------------------------------------------------------------------------------- 3.Are there boards which can boot kernel by Tftp? I’m sorry for taking your time,thank you! Best regards, Guotao Xie
发件人: Roy Franz [mailto:roy.franz@linaro.org] 发送时间: 2014年4月24日 6:31 收件人: Leif Lindholm 抄送: Xieguotao; linaro-uefi@lists.linaro.org 主题: Re: [Linaro-uefi] The problem in Booting Kernel
Hi Xieguotao,
Does the 'ping' command from the EFI shell work in your configuration?
Roy
On Wed, Apr 23, 2014 at 2:19 PM, Leif Lindholm <leif.lindholm@linaro.orgmailto:leif.lindholm@linaro.org> wrote: Hi Xieguotao,
I am sorry, I have only one possible idea: For the configuration option --- Is your application is an OS loader? [y/n] n --- I believe that the setting should be 'y' - the stub is indeed an OS loader.
I have asked some who have experimented with UEFI network boot to chime in with their experiences.
Best Regards,
Leif
On 23 April 2014 09:49, Xieguotao <xieguotao@huawei.commailto:xieguotao@huawei.com> wrote:
Hi all,
I have a problem,can you please help me out?
We want boot zImage(zImage is comprised of EFI stub and Linux kernel) by Tftp in Bootmanager,but we found an error:
D01 >exit
unload symbols_only c:\uefi_linaro_workspace\binary_give\uefi-next-d95896d\Build
\D01\DEBUG_RVCT\ARM\HisiPkg\D01BoardPkg\Application\Ebl\Ebl\DEBUG\Ebl.dll
[1] Ramdisk
-
VenMsg(06ED4DD0-FF78-11D3-BDC4-00A0C94053D1,0000000000000000)/uImage
- Initrd:
VenMsg(06ED4DD0-FF78-11D3-BDC4-00A0C94053D1,0000000000000000)/
initrd
- Arguments: mem=256M console=ttyAMA0,9600 - LoaderType: Linux kernel with ATAG data
Global FDT Config
- not configured
[a] Boot Manager
[b] EBL
[c] GO
Start: a
[1] Add Boot Device Entry
[2] Update Boot Device Entry
[3] Remove Boot Device Entry
[4] Update FDT path
[5] Return to main menu
Choice: 1
[1] (29 MB)
- VenMsg(06ED4DD0-FF78-11D3-BDC4-00A0C94053D1,0000000000000000)
[2] (978 MB)
- Pci(0x0,0x0)/Sata(0x0,0x0,0x0)/HD(1,MBR,0x00000000,0x3F,0x1EA3FE)
[3] (978 MB)
-
Pci(0x0,0x0)/Sata(0x0,0x0,0x0)/HD(2,MBR,0x00000000,0x1EA43D,0x1EA43D)
[4] (978 MB)
-
Pci(0x0,0x0)/Sata(0x0,0x0,0x0)/HD(3,MBR,0x00000000,0x3D487A,0x1EA43D)
[5] VenMsg(06ED4DD0-FF78-11D3-BDC4-00A0C94053D1,0000000000000000)
- VenMsg(06ED4DD0-FF78-11D3-BDC4-00A0C94053D1,0000000000000000)
[6] PXE on MAC Address: 0E:00:FF:0C:FF:FE
- MAC(0E00FF0CFFFE,0x1)
[7] TFTP on MAC Address: 0E:00:FF:0C:FF:FE
- MAC(0E00FF0CFFFE,0x1)
Select the Boot Device: 7
Get the IP address from DHCP: [y/n] y
Get the TFTP server IP address: 192.168.10.100
File path of the EFI Application or the kernel : zImage
Is an EFI Application? [y/n] y
Is your application is an OS loader? [y/n] n
Description for this new Entry: OS
[1] Add Boot Device Entry
[2] Update Boot Device Entry
[3] Remove Boot Device Entry
[4] Update FDT path
[5] Return to main menu
Choice: 5
[1] Ramdisk
-
VenMsg(06ED4DD0-FF78-11D3-BDC4-00A0C94053D1,0000000000000000)/uImage
- Initrd:
VenMsg(06ED4DD0-FF78-11D3-BDC4-00A0C94053D1,0000000000000000)/
initrd
- Arguments: mem=256M console=ttyAMA0,9600 - LoaderType: Linux kernel with ATAG data
[2] OS
- MAC(0E00FF0CFFFE,0x1)/IPv4(192.168.10.100) - LoaderType: EFI Application
Global FDT Config
- not configured
[a] Boot Manager
[b] EBL
[c] GO
Start: 2
AllocatePoolPages: failed to allocate 322561 pages
AllocatePool: failed to allocate 1321205792 bytes
AllocatePoolPages: failed to allocate 322561 pages
AllocatePool: failed to allocate 1321205792 bytes
The error happened in BdsLoadImage-> BdsConnectDevicePath.Actually, Handle is no use in BdsTftpLoadImage,so I modify BdsLoadImage for test,then we can download zImage,but we still cannot boot it;
(We can boot linux by Grub)
Can you give me some advice?
Linaro-uefi mailing list Linaro-uefi@lists.linaro.orgmailto:Linaro-uefi@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-uefi
_______________________________________________ Linaro-uefi mailing list Linaro-uefi@lists.linaro.orgmailto:Linaro-uefi@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-uefi