Hey Michael,
I was trying to update our staging instance to use a new component today
(lava-celery). I got it working, but I'm not sure if I followed the best
practice for doing this. What I did:
added entry to /srv/lava/instances/staging/code/current/buildout.cfg
pulled in my local branch of the component to code/current/local
ran ./bin/buildout
So what's the proper way to do what I just hacked together?
-andy
Hi, all
I met a problem that the omapzoom and aosp build of panda can't be booted
up in lava.
here is the bug link:
https://bugs.launchpad.net/lava-dispatcher/+bug/1012546
When we passed the bootcmd and bootargs via u-boot, and run boot to boot
the images deployed on partition3,
the u-boot load kernel image and initrd file successfully, and displayed
the line:
"Uncompressing Linux... done, booting the kernel."
but after this line, it seems that the board rebooted and boot the master
image as default again, not boot up the android image.
I guess it has relation with uboot in master image because I have tried to
use the MLO and u-boot.bin and u-boot.img in omapzoom build
to replace the files on boot partition of master image, then I can boot
the omapzoom and aosp build successfully.
(also can boot the tracking build)
What I did was as following:
1. deploy omapzoom build to sdcard with linaro-android-media-create command
2. copy the MLO and u-boot.bin and u-boot.img 3 file from sdcard to
someplace in local
3. use "./lava-create-master -r 2G panda" to create the sdcard used for
master image
we can get the lava-create-master script from
lp:lava-master-image-scripts
4. plug in the sdcard and boot the board
5. wait the board to complete the partition job.
after this, the uImage and uInitrd file in boot partition has been
change,
and then the master image can be booted with the uboot files from
omapzoom build
but I don't know why and what change has been done.
6. copy the MLO and u-boot.bin and u-boot.img 3 file to the boot partition
of sdcard
7. plug the sdcard to the board and boot it, then it can be use to boot the
tracking/omapzoom/aosp 3 builds of panda.
The version original u-boot for master image is: U-Boot 2011.12 (Feb 16
2012 - 21:46:14)
The u-boot version of omapzoom build is: U-Boot 2011.06 (Aug 20 2011 -
18:00:16).
The u-boot version of tracking build is : U-Boot SPL 2012.04.01 (Jun 14
2012 - 08:05:54)
The tracking build works fine with the original uboot of master image.
So I guess there are some differences between the original uboot for master
image and the uboot build in omapzoom build.
Anyone know the details why it can not boot the omapzoom and aosp build on
the 3rd partition,
and if I can boot the omapzoom and aosp build of panda with the
original u-boot of master image?
Thanks,
Yongqin Liu
Hi,,
i did a run through anon bundlestreams and identified the following
that we want to remove:
All anon ci- bundlestreams:
=======================
/anonymous/ci-asac-linux-linaro-3_0/ not set 36 4
/anonymous/ci-asac-linux-linaro-3_0-build/ not set 4 4
/anonymous/ci-asac-linux-linaro-3_1/ not set 28 4
/anonymous/ci-asac-linux-linaro-3_1-build/ not set 4 4
/anonymous/ci--build/ not set 18 2
/anonymous/ci-build/ not set 15 7
/anonymous/ci-build-build/ not set 4 4
/anonymous/ci-build-with-ext4-3_0/ not set 41 9
/anonymous/ci-build-with-ext4-3_0-build/ not set 12 12
/anonymous/ci-lci-build-changes/ not set 3 3
/anonymous/ci-lci-build-changes-build/ not set 6 6
/anonymous/ci-linux-igloo-kernel-snowball/ not set 1 1
/anonymous/ci-linux-Igloo-Kernel-Snowball/ not set 5 4
/anonymous/ci-linux-igloo-kernel-snowball-build/ not set 1 1
/anonymous/ci-linux-linaro-snowball-cma-test/ not set 3 3
/anonymous/ci-linux-linaro-snowball-cma-test-build/ not set 5 5
/anonymous/ci-linux-maintainers-build/ not set 10 2
/anonymous/ci-linux-maintainers-build-build/ not set 2 2
/anonymous/ci-linux-maintainers-kernel/ not set 5 5
/anonymous/ci-linux-maintainers-kernel-build/ not set 18 18
/anonymous/ci-packaged-linux-linaro-3_0/ not set 62 10
/anonymous/ci-packaged-linux-linaro-3_0-build/ not set 24 24
/anonymous/ci-packaged-linux-linaro-3_1/ not set 190 51
/anonymous/ci-packaged-linux-linaro-3_1-build/ not set 144 144
/anonymous/ci-packaged-linux-linaro-build/ not set 1 1
/anonymous/ci-packaged-linux-linaro-build-build/ not set 1 1
/anonymous/ci-packaged-linux-linaro-lt-3_1/ not set 10 5
/anonymous/ci-packaged-linux-linaro-lt-3_1-build/ not set 30 30
/anonymous/ci-Test-TI-working-tree/ not set 21 19
/anonymous/ci-Test-TI-working-tree-build/ not set 28 28
/anonymous/ci-TI-working-tree/ not set 28 15
/anonymous/ci-TI-working-tree-build/ not set 18 18
/anonymous/ci-triage-build/ not set 3 3
/anonymous/ci-upstream/ not set 119 48
All anon lava-android-:
===================
/anonymous/lava-android-leb-panda/ not set 910 770
/anonymous/lava-android-panda/ not set 13 13
/anonymous/lava-android-test/ not set 7 7
More random picks:
=================
/anonymous/anonymous/ not set 8 5
/anonymous/bootchart/ not set 8 4
/anonymous/chander-kashyap/
/anonymous/lava-daily/
/anonymous/linux-linaro-tracking/
/anonymous/miscellaneous/
/anonymous/panda01-ltp/ Restored from backup 45 44
/anonymous/panda01-posixtestsuite/ Restored from backup 1 1
/anonymous/panda01-stream/ Restored from backup 1 1
/anonymous/qemu-testing-dumping-ground/ not set 12 7
/anonymous/smem/ smem 2 1
/anonymous/USERNAME/ not set 87 69
If we can just hide them that's also fine I guess.
--
Alexander Sack
Technical Director, Linaro Platform Teams
http://www.linaro.org | Open source software for ARM SoCs
http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog
Hey everyone.
It seems that monkey trips over new test apks that have been added as a
side effect of building TARGET_BUILD_VARIANT=tests images.
For example, see: https://pastebin.linaro.org/636/
We may need to blacklist some (all?) of them initially to get meanigful
results.
Best regards
ZK
--
Zygmunt Krynicki
Linaro Validation Team
s/Validation/Android/
Hi, All
I have written a script used to connect the android with the wifi in our
lava lab.
Now we need to pass the ssid and password information to the script.
But I think it's better to put the ssid and password in some place of our
lava validation,
then the script get the information from that place.
Like put a file in /etc/lava/devices/wifi, and the content it contains like
following:
SSID=LAVA-WiFiTest01
PASSWD=PASSWORD
SSID2=LAVA-5GWiFiTest01
PASSWD2=PASSWORD2
then in the shell script, we can simply use "source /etc/lava/devices/wifi"
to get the SSID and password information.
And when we put the script into lava-android-test, we can trigger this
script when we need in the test.
How do you think about the place to put the devices information?
is /etc/lava/devices/wifi ok? bluetooth should have the same problem I
think.
Thanks,
Yongqin Liu.
Hi, All
I have updated the enable_network_after_boot_android definition
in file
/srv/lava/instances/production/etc/lava-dispatcher/device-defaults.conf for
production
Just added the following two lines:
# This is for android build where the network is not up by default. 1 or 0
enable_network_after_boot_android = 1
here just a notice.
BTW, where is the lava source deployed?
when I run find command in the /srv/lava/instances/production directory,
I can't find the source files of lava-dispatcher
Thanks,
Yongqin Liu
We've seen a significant reduction in health job failures, but I still
wanted to send out a report on these so people could see how things are
still breaking.
We've had 25 real health failures over the past 2 weeks.
By device type:
6 snowball
1 imx53
1 vexpress
2 beagle
6 origen
9 panda
By failure type:
2 SD cards died: (both on Origen)
7 Serial Console Related:
- 5 connection never established at start of job
- 1 connection dropped during test
- 1 garbage over serial line
10 Network Related:
- 3 network failed to come up
- 3 ping unreachable error
- 3 wget | tar type failure (kind of network we think)
NOTE: A report on something like this is semi-subjective, given that its
based on my interpretation of the failures. The raw information on this
can be found at:
<https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AnxpY5uv-BlNdG9zY…>
So we're reaching the point where we are going to want to have more than
one machine involved in running LAVA production. The immediate cause is
to avoid running fastmodels on the same machine as the database and web
server and everything else, but I think as the system grows up we'll
want to do this for more functions.
I know there have been some thinking about this in the past, but not to
my knowledge anything written down. I've spent a good while today
thinking about this sort of thing, so here's a bit of a brain dump.
The different parts of a LAVA instance
======================================
A LAVA instance is three things:
1) Code
2) Configuration
3) Data.
Data comes in two kinds: a postgres database and "media" files (log
files and bundles mostly for us).
There are a few parts to the configuration: there is the dispatcher
config, the server/django config and the apache config. TBH, it would
be better if the dispatcher config was derived from the database
somehow. I still think we don't do a good job of handling the apache
config, but it's a messy problem.
The Django configuration includes the information on how to reach the
data, both media and db.
I think we'll need to define an "instance set" concept -- a list of
machines and instance on those machines that share code, configuration
and data.
Multi-machine code
==================
This is easy IMHO: all machines should have the same code installed.
With the appropriate ssh keys scattered around, it should be easy to
write a fabric job or just plain bash script to run ldt update on each
machine.
Multi-machine data
==================
Accessing postgres from another machine is a solved problem, to put it
mildly :-)
I don't have a good idea on how to access media files across the
network. In an ideal world, we would have a Django storage backend that
talked to something like http://ceph.com/ceph-storage/object-storage/ or
http://hadoop.apache.org/hdfs/ -- we don't need anything like full file
system semantics -- but for now, maybe just mounting the media files
over NFS might be the quickest way to get things going.
Multi-machine configuration
===========================
I think by and large the configuration of each instance should be the
same. This means we need a mechanism to distribute changes to the
instances. One way would be to store the configuration in a branch, and
have ldt update upgrade this branch too (I think it would even be fairly
easy to have multiple copies of the configuration on disk, similar to
the way we have multiple copies of the buildouts, and have each buildout
point to a specific revision of the config).
We could also have the revision of the config branch to use be specified
in the lava-manifest branch but that doesn't sound friendly to third
party deployments -- I think the config branch should be specified as a
parameter of the instance set and updating an instance set should update
each instance to the latest version of the config branch. This will
require a certain discipline in making changes to the branch!
All that said, we don't want the instances on each machine to be
_completely_ identical, leading to...
Differentiating instances
=========================
The point of this excercise is not to purely scale horizontally; we want
different instances to do different things. I think the primary way we
will differentiate instances is by which services they run: do they run
uwsgi or not, do they run the scheduler or not, do they run celeryd or
not? We already have a limited form of this already, in that you can
configure an instance to start the scheduler or not, but this will need
systemizing.
In addition one instance in a set will need to 'own' the database: when
we upgrade an instance we want one and only one instance to run the
migrations.
I'd also like to push towards a model where we can do rolling upgrades
but that's a different kettle of fish I think ...
Setup issues
============
There will be a requirement to make sure ssh keys etc are set up on the
various machines involved. Ideally this would be done via puppet but
for now I think we can just do it by hand...
Thoughts? After writing this email, I don't think that there is a huge
amount of work to do a good job here; we shouldn't settle for hacks.
Cheers,
mwh
