I would say getting it to completion is a good start. Can we look at deploying this on the other PandaBoards (not the ESes) in CBuild and then reintroducing them to the queues?
Also have you written up what you've done on a Wiki page somewhere?
Thanks,
Matt
On 29/01/13 15:24, Christophe Lyon wrote:
Hi all, I could run the gcc testsuite last night on tcpanda01: it took about 21h (!), but I still don't know how hot the board became :-(
Christophe.
On 24 January 2013 10:48, Renato Golin Linaro renato.golin@linaro.org wrote:
I just had another lockup this night, given enough load, it will fail. :(
cheers, --renato
On 22 January 2013 16:18, Christophe Lyon christophe.lyon@linaro.org wrote:
As discussed off-line with Renato, it seems there is no wifi on Panda (non-ES), and I didn't notice any useless daemons.
Let's wait for the gcc build to complete with the thermal driver enabled.
Christophe.
On 22 January 2013 14:31, Renato Golin Linaro renato.golin@linaro.org wrote:
Hi Christophe,
It could be the wireless, or something else. Below is my blacklist on modprobe.d:
# Rack mount no extra rubbish blacklist rfcomm blacklist bnep blacklist bluetooth blacklist ppdev blacklist lp blacklist parport blacklist wl12xx_sdio blacklist wl12xx blacklist mac80211 blacklist twl6040_vibra blacklist ff_memless blacklist cfg80211
This involves wireless, bluetooth, parallel ports etc. It is also almost all kernel modules active (with the exception of the led driver).
I also removed some silly packages and disabled most daemons, but I guess your image is much cleaner than mine.
cheers, --renato
On 22 January 2013 13:26, Christophe Lyon christophe.lyon@linaro.org wrote:
It makes sense indeed (reminds me of my guru-plug getting very hot with wifi enabled).
But currently ifconfig only shows eth0 and lo; it looks like wifi is not activated already :-(
Christophe.
On 22 January 2013 11:43, Matthew Gretton-Dann matthew.gretton-dann@linaro.org wrote:
Interesting. Christophe do you want to take a look?
Matt
On 22/01/13 10:24, Dave Pigott wrote: > > Hi Matt, > > Interesting discovery by Renato re overheating on Pandas - he had a > similar problem and just disabled wifi, and the board ran a *lot* > cooler. > Could this be your problem in the toolchain pandas? > > Thanks > > Dave > > On 21 Jan 2013, at 19:53, Matthew Gretton-Dann > matthew.gretton-dann@linaro.org wrote: > >> On 21/01/13 19:38, Paul Sokolovsky wrote: >>> >>> Hello, >>> >>> I'm offline Tue/Wed, so here's update on CBuild/LAVA (other folks >>> from >>> Infra should be present on Tue hangout). >>> >>> We've been doing integration testing since end of last week, and >>> generally it looks good. We didn't have complete end-to-end GCC >>> build >>> due to PandaES + USB drive availability issues, but I tested gcc >>> build >>> on Panda instead (this has some OOMs during "make check" in gcc), >>> and >>> smaller builds like cortex-strings on PandaES. >> >> >> Some tests deliberately try to exhaust all memory - if they're not >> already we should be explicitly ulimiting the make check process to >> not >> cause random processes to be killed. >> >>> So, everything looks good for deployment on Thurs, just 2 >>> following >>> issues are on critical path: >>> >>> 1. Patches >>> (https://code.launchpad.net/~linaro-infrastructure/+activereviews) >>> review by TCWG. Matt, I guess you were busy with toolchain release >>> last week, but we'd appreciate your review now. >> >> >> I'll try and do that in the next 48 hours. >> >>> 2. Merging the changes, assuming they're ok. Infra people don't >>> have >>> commit access to CBuild repos, so we depend on TCWG here too. >>> Actually, >>> it may be expected that after initial launch, we'll need to do >>> more >>> changes and tweaks, so it may be good idea to give Infra >>> (temporary) >>> commit access to streamline process. It would be nice to discuss >>> this >>> during Tue hangout. >> >> >> I thought you had access, and was expecting you to merge all >> changes. >> I >> am happy for anyone to merge their own stuff when the merge has >> been >> approved. Can someone send me (off-list) the appropriate list of >> people (or >> Launchpad group) to give commit access to? >> >> Thanks, >> >> Matt >> >> >> -- >> Matthew Gretton-Dann >> Toolchain Working Group, Linaro >> >> _______________________________________________ >> linaro-validation mailing list >> linaro-validation@lists.linaro.org >> http://lists.linaro.org/mailman/listinfo/linaro-validation > >
-- Matthew Gretton-Dann Toolchain Working Group, Linaro