Understood. I’ll add that option to the dispatcher. Should be a quick fix.
Dave
On 16 Sep 2015, at 16:19, Kevin Hilman khilman@linaro.org wrote:
Thanks.
FWIW, I'd rather not pass bl1, fip or any firmware. IMO, there should be an option which says "just trust the firmware on the board" for cases when LAVA is not the only user of the board.
Kevin
On Wed, Sep 16, 2015 at 8:11 AM, Dave Pigott dave.pigott@linaro.org wrote:
Hi Kevin
Ok. I wasn’t thinking when I typed that. I meant “false”.
I know why it’s doing that, so I’ll try and figure out a way to make that work for you. I think you’ll just have to set up a path to the bl1.bin and fip.bin that you want in the config.
Dave
On 16 Sep 2015, at 15:56, Kevin Hilman khilman@linaro.org wrote:
Hi Dave,
Thanks for the suggestion.
But... it doesn't work. The first thing it does is mount the USB mass storage, 'rm -rf *' and then extract the board-recovery tarball onto the usb device, wiping out the firmware I had installed[1]
For kicks, I tried setting same flag to False, but then it fails[2] trying to download "None" ;)
Kevin
[1] http://lava.ished.com/scheduler/job/23/log_file#bottom [2] http://lava.ished.com/scheduler/job/24/log_file#bottom
On Wed, Sep 16, 2015 at 1:04 AM, Dave Pigott dave.pigott@linaro.org wrote:
Hi Kevin,
Given I wrote that support I *should* know the answer. :)
I *think* if you set
vexpress_complete_firmware = true
in the device config in /etc/lava-dispatcher/devices/(your-juno-name).conf
it should work.
Let me know how you get on!
Dave
On 16 Sep 2015, at 01:22, Kevin Hilman khilman@linaro.org wrote:
How to tell LAVA to not try an update the firmware my juno-r1 board?
The default juno device type points to a tarball[1] it uses to update/replace the juno firmware, unfortunately, that tarball seems to only be configured for Juno, not the juno R1.
After and unpack/flash/reboot, the juno board fails to boot with:
ERROR: File not found \MB\HBI0262C\board.txt
Note the 'C' in the board name HBI0262C, whereas the tarball only contains HBI0262B.
I have flashed working firmware onto my Juno R1 and would like LAVA to leave it alone. Is there a way to do that?
Kevin
[1] http://images.validation.linaro.org/juno/board-recovery-image.tgz _______________________________________________ linaro-validation mailing list linaro-validation@lists.linaro.org https://lists.linaro.org/mailman/listinfo/linaro-validation