Hi Kevin,
Given I wrote that support I *should* know the answer. :)
I *think* if you set
vexpress_complete_firmware = true
in the device config in /etc/lava-dispatcher/devices/(your-juno-name).conf
it should work.
Let me know how you get on!
Dave
On 16 Sep 2015, at 01:22, Kevin Hilman khilman@linaro.org wrote:
How to tell LAVA to not try an update the firmware my juno-r1 board?
The default juno device type points to a tarball[1] it uses to update/replace the juno firmware, unfortunately, that tarball seems to only be configured for Juno, not the juno R1.
After and unpack/flash/reboot, the juno board fails to boot with:
ERROR: File not found \MB\HBI0262C\board.txt
Note the 'C' in the board name HBI0262C, whereas the tarball only contains HBI0262B.
I have flashed working firmware onto my Juno R1 and would like LAVA to leave it alone. Is there a way to do that?
Kevin
[1] http://images.validation.linaro.org/juno/board-recovery-image.tgz _______________________________________________ linaro-validation mailing list linaro-validation@lists.linaro.org https://lists.linaro.org/mailman/listinfo/linaro-validation