Hi Milosz,

linux-next builds reported all targets are successful. https://ci.linaro.org/jenkins/job/linux-next/

LAVA dashboard reported below status, http://validation.linaro.org/lava-server/dashboard/image-reports/

snowball: ------------ -> Buffer I/O error on device mmcblk0boot1, logical block 0 -> mmcblk0boot1: unable to read partition table -> failed to mount rootfs -> CRITICAL: Could not get master image booted properly -> ERROR: boot_linaro_image failed -> http://validation.linaro.org/lava-server/scheduler/job/55006/log_file

panda (omap2plus): ------------------------- -> Test executed successful. -> http://validation.linaro.org/lava-server/scheduler/job/55004/log_file

origen: --------- -> nothing shows up after below message. which means boot failed. -> Starting kernel ...

-> <LAVA_DISPATCHER>2013-05-20 02:16:46 AM WARNING: Sending newline in case of corruption. -> ERROR: boot_linaro_image failed -> [ACTION-E] boot_linaro_image is finished with error (Failed to boot test image.) -> http://validation.linaro.org/lava-server/scheduler/job/54893/log_file

vexpress: -------------- -> sudo flock /var/lock/lava-lmc.lck linaro-media-create --hwpack-force-yes --dev vexpress --image-file /linaro/images/tmp/tmp3MGayb/lava.img --binary /linaro/images/tmp/tmp3MGayb/linaro-raring-nano-lava-20130520-373.tar.gz --hwpack /linaro/images/tmp/tmp3MGayb/hwpack_linaro-vexpress_20130521-0245_b44_armhf_supported.tar.gz --image-size 3G --bootloader u_boot

-> deploy_linaro_image is finished with error ([Errno 2] No such file or directory: '/tmp/tmpdaPV2n/etc/profile')

http://validation.linaro.org/lava-server/scheduler/job/55008/log_file

Here we need to identify and isolate the root cause of each build (root cause could be zImage/initrd/dtb/hardware pack/ rootfs / and etc). To do this do we need to reproduce on our local target boards ?

Best regards Naresh Kamboju