Hi,
I am interested in running V2 jobs on the dragonboard 410c using the 17.04 bootloader release files[1] and 17.04 debian release images[2].
The db410c health checks in staging and PMWG labs use the 16.06 files. The 16.06 version contains sec.dat[3], which does not exist in 17.04. However, there is a file called sbc_1.0_8016.bin that is included in 17.04. I compared the contents of the 16.06 and 17.04 bootloader zip files to be sure[4].
Where I would include the sbc_1.0_8016.bin file in the job definition? Would it be simple as adding an entry like
cdt: url: <path/to/sbc_1.0_8016.bin_file>
This is where I'm not sure about.
Regards, Lisa
[1] http://builds.96boards.org/releases/dragonboard410c/linaro/rescue/17.04/ [2] http://builds.96boards.org/releases/dragonboard410c/linaro/debian/17.04/ [3] https://pmwg.validation.linaro.org/scheduler/job/1800/definition#defline49 [4] https://hastebin.com/asosohiyis.rb
On Tue, 20 Jun 2017 14:00:53 -0700 Lisa Nguyen lisa.nguyen@linaro.org wrote:
Hi,
I am interested in running V2 jobs on the dragonboard 410c using the 17.04 bootloader release files[1] and 17.04 debian release images[2].
The db410c health checks in staging and PMWG labs use the 16.06 files. The 16.06 version contains sec.dat[3], which does not exist in 17.04. However, there is a file called sbc_1.0_8016.bin that is included in 17.04. I compared the contents of the 16.06 and 17.04 bootloader zip files to be sure[4].
The available partitions are shown in the device configuration which can be downloaded from the UI: https://staging.validation.linaro.org/scheduler/device/staging-db410c-01/dev...
That shows an entry 'sbl1' which could be related to sbc_1 but it would be useful to have some documentation from 96boards on this. Try searching the 96boards forums to find out what that file is meant to do.
http://www.96boards.org/find/#gsc.tab=0&gsc.q=sbl_1%20410c
On 20 June 2017 at 14:23, Neil Williams codehelp@debian.org wrote:
On Tue, 20 Jun 2017 14:00:53 -0700 Lisa Nguyen lisa.nguyen@linaro.org wrote:
Hi,
I am interested in running V2 jobs on the dragonboard 410c using the 17.04 bootloader release files[1] and 17.04 debian release images[2].
The db410c health checks in staging and PMWG labs use the 16.06 files. The 16.06 version contains sec.dat[3], which does not exist in 17.04. However, there is a file called sbc_1.0_8016.bin that is included in 17.04. I compared the contents of the 16.06 and 17.04 bootloader zip files to be sure[4].
The available partitions are shown in the device configuration which can be downloaded from the UI: https://staging.validation.linaro.org/scheduler/device/staging-db410c-01/dev...
That shows an entry 'sbl1' which could be related to sbc_1 but it would be useful to have some documentation from 96boards on this. Try searching the 96boards forums to find out what that file is meant to do.
I posted a question about finding the latest bootloader information for db410c, and Nicolas was able to explain what the sbc_1.0_8016.bin file does.
https://discuss.96boards.org/t/documentation-on-db410c-bootloader-files/2124...
Based on Nico's response, does the device config need to be updated to include the cdt partition?
On Thu, 22 Jun 2017 09:27:35 -0700 Lisa Nguyen lisa.nguyen@linaro.org wrote:
On 20 June 2017 at 14:23, Neil Williams codehelp@debian.org wrote:
On Tue, 20 Jun 2017 14:00:53 -0700 Lisa Nguyen lisa.nguyen@linaro.org wrote:
Hi,
I am interested in running V2 jobs on the dragonboard 410c using the 17.04 bootloader release files[1] and 17.04 debian release images[2].
The db410c health checks in staging and PMWG labs use the 16.06 files. The 16.06 version contains sec.dat[3], which does not exist in 17.04. However, there is a file called sbc_1.0_8016.bin that is included in 17.04. I compared the contents of the 16.06 and 17.04 bootloader zip files to be sure[4].
The available partitions are shown in the device configuration which can be downloaded from the UI: https://staging.validation.linaro.org/scheduler/device/staging-db410c-01/dev...
That shows an entry 'sbl1' which could be related to sbc_1 but it would be useful to have some documentation from 96boards on this. Try searching the 96boards forums to find out what that file is meant to do.
I posted a question about finding the latest bootloader information for db410c, and Nicolas was able to explain what the sbc_1.0_8016.bin file does.
https://discuss.96boards.org/t/documentation-on-db410c-bootloader-files/2124...
Based on Nico's response, does the device config need to be updated to include the cdt partition?
Why do you think you need to modify the content of this partition? From that answer, it looks more like an admin change.
linaro-validation@lists.linaro.org
-
Lisa Nguyen -
Neil Williams