Hello,
The LITE team appreciates bootstrapping of Zephyr-related LAVA testing done by LAVA, LAVA Lab, B&B and QA teams. It was quite a backlogged task for ourselves to be more involved with LAVA testing, and hopefully, the time has come ;-).
I've reviewed the current status of on-device testing for Zephyr CI jobs and see the following picture (feel free to correct me if something is wrong are missing): "zephyr-upstream" and "zephyr-upstream-arm" (https://ci.linaro.org/view/lite-iot-ci/) CI jobs submit a number of tests to LAVA (via https://qa-reports.linaro.org/) for the following boards: arduino_101, frdm_k64f, frdm_kw41z, qemu_cortex_m3. Here's an example of cumulative test report for these platforms: https://qa-reports.linaro.org/lite/zephyr-upstream/tests/
That's really great! (Though the list of tests to run in LAVA seems to be hardcoded: https://git.linaro.org/ci/job/configs.git/tree/zephyr-upstream/submit_for_te...)
But we'd like to test things beyond Zephyr testsuite, for example, application frameworks (JerryScript, Zephyr.js, MicroPython) and the mcuboot bootloader. For starters, we'd like to perform just a boot test to make sure that each application can boot and start up, then later hopefully to extend that to functional testing.
The most basic testing would be just check that after boot there's an expected prompt from each of the apps, i.e. test it in "passive" manner, similar to Zephyr unittests discussed above. I tried this with Zephyr.js and was able to make it work (with manual submission so far): https://validation.linaro.org/scheduler/job/1534097 . A peculiarity in this case is that the default test app of Zephyr.js outputs just a single line "Hello, ZJS world!", whereas LAVA's test/monitors test job config specifies testsuite begin pattern, end pattern, and testcase patterns, and I had a suspicion that each of them need to be on a separate line. But I was able to make it pass with the following config:
- test: monitors: - name: foo start: "" end: Hello, ZJS world! pattern: (?P<result>(PASS|FAIL))\s-\s(?P<test_case_id>\w+).
So, the "start" substring is empty, and perhaps matches a line output by a USB multiplexer or board bootloader. "End" substring is actually the expected single-line output. And "pattern" is unused (dunno if it can be dropped without def file syntax error). Is there a better way to handle single-line test output?
Well, beyond a simple output matching, it would be nice even for the initial "smoke testing" to actually make some input into the application and check the expected output (e.g., input: "2+2", expected output: "4"). Is this already supported for LAVA "v2" pipeline tests? I may imagine that would be the same kind of functionality required to test bootloaders like U-boot for Linux boards.
Thanks, Paul
Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#%21/linaroorg - http://www.linaro.org/linaro-blog
On 19 June 2017 at 13:47, Paul Sokolovsky paul.sokolovsky@linaro.org wrote:
Hello,
The LITE team appreciates bootstrapping of Zephyr-related LAVA testing done by LAVA, LAVA Lab, B&B and QA teams. It was quite a backlogged task for ourselves to be more involved with LAVA testing, and hopefully, the time has come ;-).
I've reviewed the current status of on-device testing for Zephyr CI jobs and see the following picture (feel free to correct me if something is wrong are missing): "zephyr-upstream" and "zephyr-upstream-arm" (https://ci.linaro.org/view/lite-iot-ci/) CI jobs submit a number of tests to LAVA (via https://qa-reports.linaro.org/) for the following boards: arduino_101, frdm_k64f, frdm_kw41z, qemu_cortex_m3. Here's an example of cumulative test report for these platforms: https://qa-reports.linaro.org/lite/zephyr-upstream/tests/
That's really great! (Though the list of tests to run in LAVA seems to be hardcoded: https://git.linaro.org/ci/job/configs.git/tree/zephyr-upstream/submit_for_te...)
It is, as I wasn't really sure what to test. The build job needs to prepare the test templates to be submitted to LAVA. In case of zephyr each tests is a separate binary. So we end up with the number of file paths to substitute in the template. Hardcoding was the easiest thing to get things running. But I see no reason why it wouldn't be changed with some smarter code to discover the binaries. The problem with this approach is that some of these tests are just build time. They have no meaning when running on the board and need to be filter out somehow.
But we'd like to test things beyond Zephyr testsuite, for example, application frameworks (JerryScript, Zephyr.js, MicroPython) and the mcuboot bootloader. For starters, we'd like to perform just a boot test to make sure that each application can boot and start up, then later hopefully to extend that to functional testing.
The most basic testing would be just check that after boot there's an expected prompt from each of the apps, i.e. test it in "passive" manner, similar to Zephyr unittests discussed above. I tried this with Zephyr.js and was able to make it work (with manual submission so far): https://validation.linaro.org/scheduler/job/1534097 . A peculiarity in this case is that the default test app of Zephyr.js outputs just a single line "Hello, ZJS world!", whereas LAVA's test/monitors test job config specifies testsuite begin pattern, end pattern, and testcase patterns, and I had a suspicion that each of them need to be on a separate line. But I was able to make it pass with the following config:
- test: monitors:
- name: foo start: "" end: Hello, ZJS world! pattern: (?P<result>(PASS|FAIL))\s-\s(?P<test_case_id>\w+).
So, the "start" substring is empty, and perhaps matches a line output by a USB multiplexer or board bootloader. "End" substring is actually the expected single-line output. And "pattern" is unused (dunno if it can be dropped without def file syntax error). Is there a better way to handle single-line test output?
You're making a silent assumption that if there is a matching line, the test is passed. In case of other tests (zephyr unit tests), it's not the case. The 'start' matches some line which is displayed when zephyr is booting. End matches the line which is displayed after all testing is done. The pattern follows the unit test pattern.
Well, beyond a simple output matching, it would be nice even for the initial "smoke testing" to actually make some input into the application and check the expected output (e.g., input: "2+2", expected output: "4"). Is this already supported for LAVA "v2" pipeline tests? I may imagine that would be the same kind of functionality required to test bootloaders like U-boot for Linux boards.
I didn't use anything like this in v2 so far, but you're probably best off doing sth like
test 2+2=4 PASS.
than you can easily create pattern that will filter the output. In case of zephyr pattern is the only way to filter things out as there is no shell (?) on the board.
milosz
Hello Milosz,
I appreciate getting at least some response ;-). Some questions however could use a reply from LAVA team, I guess.
On Mon, 3 Jul 2017 13:34:49 +0100 Milosz Wasilewski milosz.wasilewski@linaro.org wrote:
[]
jobs submit a number of tests to LAVA (via https://qa-reports.linaro.org/) for the following boards: arduino_101, frdm_k64f, frdm_kw41z, qemu_cortex_m3. Here's an example of cumulative test report for these platforms: https://qa-reports.linaro.org/lite/zephyr-upstream/tests/
That's really great! (Though the list of tests to run in LAVA seems to be hardcoded: https://git.linaro.org/ci/job/configs.git/tree/zephyr-upstream/submit_for_te...)
It is, as I wasn't really sure what to test. The build job needs to prepare the test templates to be submitted to LAVA. In case of zephyr each tests is a separate binary. So we end up with the number of file paths to substitute in the template. Hardcoding was the easiest thing to get things running. But I see no reason why it wouldn't be changed with some smarter code to discover the binaries. The problem with this approach is that some of these tests are just build time. They have no meaning when running on the board and need to be filter out somehow.
I see, that makes some sense. But thinking further, I'm not entirely sure about "build only" tests. Zephyr's sanitycheck test has such concept, but I'd imagine it comes from the following reasons: a) sanitycheck runs tests on QEMU, which has very bare hardware support, so many tests are not runnable; b) sanitycheck can operate on "samples", not just "tests", as sample can be interactive, etc. it makes sense to only build them, not run.
So, I'm not exactly sure about build-only tests on real HW boards. The "default" idea would be that they should run, but I imagine in reality, some may need to be filtered out. But then blacklisting would be better approach than whitelisting. And I'm not sure if Zephyr has concept of "skipped" tests which may be useful to handle hardware variations. (Well, I actually dunno if LAVA supports skipped tests!)
Anyway, these are rough ideas for the future. I've spent couple of weeks of munging with LITE CI setup, there're definitely some improvements, but also a Pandora box of other ideas and improvements to make. I'm wrapping up for now, but hope to look again in some time (definitely hope to look before the Connect, so we can discuss further steps there). In the meantime, I hope that more boards will be installed in the Lab and stability of them improves (so far they seem to be pretty flaky).
[]
- test: monitors:
- name: foo start: "" end: Hello, ZJS world! pattern: (?P<result>(PASS|FAIL))\s-\s(?P<test_case_id>\w+).
So, the "start" substring is empty, and perhaps matches a line output by a USB multiplexer or board bootloader. "End" substring is actually the expected single-line output. And "pattern" is unused (dunno if it can be dropped without def file syntax error). Is there a better way to handle single-line test output?
You're making a silent assumption that if there is a matching line, the test is passed. In case of other tests (zephyr unit tests), it's not the case. The 'start' matches some line which is displayed when zephyr is booting. End matches the line which is displayed after all testing is done. The pattern follows the unit test pattern.
Thanks, but I'm not sure I understand this response. I don't challenge that Zephyr unittests need this support, or the way they're handled. LITE however needs to test more things than "batch" Zephyr unittests. I present another usercase which albeit simple, barely supported by LAVA. (That's a question to LAVA team definitely.)
Well, beyond a simple output matching, it would be nice even for the initial "smoke testing" to actually make some input into the application and check the expected output (e.g., input: "2+2", expected output: "4"). Is this already supported for LAVA "v2" pipeline tests? I may imagine that would be the same kind of functionality required to test bootloaders like U-boot for Linux boards.
I didn't use anything like this in v2 so far, but you're probably best off doing sth like
test 2+2=4 PASS.
than you can easily create pattern that will filter the output. In case of zephyr pattern is the only way to filter things out as there is no shell (?) on the board.
So, the problem, for starters, is how to make LAVA *feed* the input, as specified in the test definition (like "2+2") into a board.
As there were no reply from LAVA team (I may imagine they're busy with other things), I decided to create a user story in Jira for them, as I couldn't create a LAVA-* ticket, I created it as https://projects.linaro.org/browse/LITE-175 . Hopefully that won't go unnoticed and LAVA team would get to it eventually.
milosz
Thanks!
On 3 July 2017 at 21:50, Paul Sokolovsky paul.sokolovsky@linaro.org wrote:
Hello Milosz,
I appreciate getting at least some response ;-). Some questions however could use a reply from LAVA team, I guess.
On Mon, 3 Jul 2017 13:34:49 +0100 Milosz Wasilewski milosz.wasilewski@linaro.org wrote:
[]
jobs submit a number of tests to LAVA (via https://qa-reports.linaro.org/) for the following boards: arduino_101, frdm_k64f, frdm_kw41z, qemu_cortex_m3. Here's an example of cumulative test report for these platforms: https://qa-reports.linaro.org/lite/zephyr-upstream/tests/
That's really great! (Though the list of tests to run in LAVA seems to be hardcoded: https://git.linaro.org/ci/job/configs.git/tree/zephyr-upstream/submit_for_te...)
It is, as I wasn't really sure what to test. The build job needs to prepare the test templates to be submitted to LAVA. In case of zephyr each tests is a separate binary. So we end up with the number of file paths to substitute in the template. Hardcoding was the easiest thing to get things running. But I see no reason why it wouldn't be changed with some smarter code to discover the binaries. The problem with this approach is that some of these tests are just build time. They have no meaning when running on the board and need to be filter out somehow.
I see, that makes some sense. But thinking further, I'm not entirely sure about "build only" tests. Zephyr's sanitycheck test has such concept, but I'd imagine it comes from the following reasons: a) sanitycheck runs tests on QEMU, which has very bare hardware support, so many tests are not runnable; b) sanitycheck can operate on "samples", not just "tests", as sample can be interactive, etc. it makes sense to only build them, not run.
So, I'm not exactly sure about build-only tests on real HW boards. The "default" idea would be that they should run, but I imagine in reality, some may need to be filtered out. But then blacklisting would be better approach than whitelisting. And I'm not sure if Zephyr has concept of "skipped" tests which may be useful to handle hardware variations. (Well, I actually dunno if LAVA supports skipped tests!)
As far as I can tell they acutely run on the board, but usually output just 'Hello world!' or sth similar. As we discussed with Kumar, this is still OK. What Kumar requested (and I still didn't deliver) is that whenever the LAVA test job completes, the test should be considered 'passed'. So we wouldn't have to do any parsing of patterns. I'm not sure if that will work, but it's worth to try.
Anyway, these are rough ideas for the future. I've spent couple of weeks of munging with LITE CI setup, there're definitely some improvements, but also a Pandora box of other ideas and improvements to make. I'm wrapping up for now, but hope to look again in some time (definitely hope to look before the Connect, so we can discuss further steps there). In the meantime, I hope that more boards will be installed in the Lab and stability of them improves (so far they seem to be pretty flaky).
You're absolutely right. This is a pretty big task to work on and IMHO requires someone to work full time at least for couple of weeks. The second part is also true, the boards don't behave as they should. I guess Dave can elaborate more on that. I can only see the result - boards (frdm-kw41z) don't run the tests they're requested.
[]
- test: monitors:
- name: foo start: "" end: Hello, ZJS world! pattern: (?P<result>(PASS|FAIL))\s-\s(?P<test_case_id>\w+).
So, the "start" substring is empty, and perhaps matches a line output by a USB multiplexer or board bootloader. "End" substring is actually the expected single-line output. And "pattern" is unused (dunno if it can be dropped without def file syntax error). Is there a better way to handle single-line test output?
You're making a silent assumption that if there is a matching line, the test is passed. In case of other tests (zephyr unit tests), it's not the case. The 'start' matches some line which is displayed when zephyr is booting. End matches the line which is displayed after all testing is done. The pattern follows the unit test pattern.
Thanks, but I'm not sure I understand this response. I don't challenge that Zephyr unittests need this support, or the way they're handled. LITE however needs to test more things than "batch" Zephyr unittests. I present another usercase which albeit simple, barely supported by LAVA. (That's a question to LAVA team definitely.)
I probably misunderstood the question as well. So let's wait for response from someone else.
Well, beyond a simple output matching, it would be nice even for the initial "smoke testing" to actually make some input into the application and check the expected output (e.g., input: "2+2", expected output: "4"). Is this already supported for LAVA "v2" pipeline tests? I may imagine that would be the same kind of functionality required to test bootloaders like U-boot for Linux boards.
I didn't use anything like this in v2 so far, but you're probably best off doing sth like
test 2+2=4 PASS.
than you can easily create pattern that will filter the output. In case of zephyr pattern is the only way to filter things out as there is no shell (?) on the board.
So, the problem, for starters, is how to make LAVA *feed* the input, as specified in the test definition (like "2+2") into a board.
Right. What I proposed was coding all the inputs in the test itself.
As there were no reply from LAVA team (I may imagine they're busy with other things), I decided to create a user story in Jira for them, as I couldn't create a LAVA-* ticket, I created it as https://projects.linaro.org/browse/LITE-175 . Hopefully that won't go unnoticed and LAVA team would get to it eventually.
It's probably best to create CTT ticket here: https://projects.linaro.org/servicedesk/customer/portal/1 These tickets won't go unnoticed.
milosz
Hello Milosz,
Thanks for routing this thread to lava-users - when I made initial post to linaro-validation, I check my archive and so that e.g. Neil posts there frequently, but I missed that it's not official LAVA list.
On Mon, 3 Jul 2017 22:25:31 +0100 Milosz Wasilewski milosz.wasilewski@linaro.org wrote:
[]
So, I'm not exactly sure about build-only tests on real HW boards. The "default" idea would be that they should run, but I imagine in reality, some may need to be filtered out. But then blacklisting would be better approach than whitelisting. And I'm not sure if Zephyr has concept of "skipped" tests which may be useful to handle hardware variations. (Well, I actually dunno if LAVA supports skipped tests!)
As far as I can tell they acutely run on the board, but usually output just 'Hello world!' or sth similar. As we discussed with Kumar, this is still OK. What Kumar requested (and I still didn't deliver) is that whenever the LAVA test job completes, the test should be considered 'passed'. So we wouldn't have to do any parsing of patterns. I'm not sure if that will work, but it's worth to try.
Hmm, I wonder what would be criteria for being "failed" for such tests... Anyway, thanks for sharing - I'm not familiar with all Zephyr tests/samples myself, will keep in mind such issues when looking into them.
[]
more boards will be installed in the Lab and stability of them improves (so far they seem to be pretty flaky).
You're absolutely right. This is a pretty big task to work on and IMHO requires someone to work full time at least for couple of weeks. The second part is also true, the boards don't behave as they should. I guess Dave can elaborate more on that. I can only see the result - boards (frdm-kw41z) don't run the tests they're requested.
Matt Hart actually showed me a ticket on that, so at least it's confirmed/known issue in works. But even with arduino_101 and frdm_k64f, I hit cases more than once when board(s) were stuck for extended time, but still were routed jobs to (which either failed or timed out). So, there may be problem with health checks, which either don't run frequently enough or aren't robust enough. arduino_101 is all the lone one, so if something happens to it, there's no backup. Etc, etc.
[]
So, the problem, for starters, is how to make LAVA *feed* the input, as specified in the test definition (like "2+2") into a board.
Right. What I proposed was coding all the inputs in the test itself.
Well, that would require bunch of legwork, but the biggest problem is that it wouldn't test what's actually required. E.g. both JerryScript and MicroPython Zephyr ports are actually interactive apps working over serial connection. And functional testing of them would be feeding something over this serial connection and checking that results are as expected. I'll keep in mind idea of "builtin" tests though.
Thanks!
I was too quick to hit reply. CCing lava-users for comments from LAVA team.
milosz
On 3 July 2017 at 21:50, Paul Sokolovsky paul.sokolovsky@linaro.org wrote:
Hello Milosz,
I appreciate getting at least some response ;-). Some questions however could use a reply from LAVA team, I guess.
On Mon, 3 Jul 2017 13:34:49 +0100 Milosz Wasilewski milosz.wasilewski@linaro.org wrote:
[]
jobs submit a number of tests to LAVA (via https://qa-reports.linaro.org/) for the following boards: arduino_101, frdm_k64f, frdm_kw41z, qemu_cortex_m3. Here's an example of cumulative test report for these platforms: https://qa-reports.linaro.org/lite/zephyr-upstream/tests/
That's really great! (Though the list of tests to run in LAVA seems to be hardcoded: https://git.linaro.org/ci/job/configs.git/tree/zephyr-upstream/submit_for_te...)
It is, as I wasn't really sure what to test. The build job needs to prepare the test templates to be submitted to LAVA. In case of zephyr each tests is a separate binary. So we end up with the number of file paths to substitute in the template. Hardcoding was the easiest thing to get things running. But I see no reason why it wouldn't be changed with some smarter code to discover the binaries. The problem with this approach is that some of these tests are just build time. They have no meaning when running on the board and need to be filter out somehow.
I see, that makes some sense. But thinking further, I'm not entirely sure about "build only" tests. Zephyr's sanitycheck test has such concept, but I'd imagine it comes from the following reasons: a) sanitycheck runs tests on QEMU, which has very bare hardware support, so many tests are not runnable; b) sanitycheck can operate on "samples", not just "tests", as sample can be interactive, etc. it makes sense to only build them, not run.
So, I'm not exactly sure about build-only tests on real HW boards. The "default" idea would be that they should run, but I imagine in reality, some may need to be filtered out. But then blacklisting would be better approach than whitelisting. And I'm not sure if Zephyr has concept of "skipped" tests which may be useful to handle hardware variations. (Well, I actually dunno if LAVA supports skipped tests!)
Anyway, these are rough ideas for the future. I've spent couple of weeks of munging with LITE CI setup, there're definitely some improvements, but also a Pandora box of other ideas and improvements to make. I'm wrapping up for now, but hope to look again in some time (definitely hope to look before the Connect, so we can discuss further steps there). In the meantime, I hope that more boards will be installed in the Lab and stability of them improves (so far they seem to be pretty flaky).
[]
- test: monitors:
- name: foo start: "" end: Hello, ZJS world! pattern: (?P<result>(PASS|FAIL))\s-\s(?P<test_case_id>\w+).
So, the "start" substring is empty, and perhaps matches a line output by a USB multiplexer or board bootloader. "End" substring is actually the expected single-line output. And "pattern" is unused (dunno if it can be dropped without def file syntax error). Is there a better way to handle single-line test output?
You're making a silent assumption that if there is a matching line, the test is passed. In case of other tests (zephyr unit tests), it's not the case. The 'start' matches some line which is displayed when zephyr is booting. End matches the line which is displayed after all testing is done. The pattern follows the unit test pattern.
Thanks, but I'm not sure I understand this response. I don't challenge that Zephyr unittests need this support, or the way they're handled. LITE however needs to test more things than "batch" Zephyr unittests. I present another usercase which albeit simple, barely supported by LAVA. (That's a question to LAVA team definitely.)
Well, beyond a simple output matching, it would be nice even for the initial "smoke testing" to actually make some input into the application and check the expected output (e.g., input: "2+2", expected output: "4"). Is this already supported for LAVA "v2" pipeline tests? I may imagine that would be the same kind of functionality required to test bootloaders like U-boot for Linux boards.
I didn't use anything like this in v2 so far, but you're probably best off doing sth like
test 2+2=4 PASS.
than you can easily create pattern that will filter the output. In case of zephyr pattern is the only way to filter things out as there is no shell (?) on the board.
So, the problem, for starters, is how to make LAVA *feed* the input, as specified in the test definition (like "2+2") into a board.
As there were no reply from LAVA team (I may imagine they're busy with other things), I decided to create a user story in Jira for them, as I couldn't create a LAVA-* ticket, I created it as https://projects.linaro.org/browse/LITE-175 . Hopefully that won't go unnoticed and LAVA team would get to it eventually.
milosz
Thanks!
-- Best Regards, Paul
Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#%21/linaroorg - http://www.linaro.org/linaro-blog
On Mon, 3 Jul 2017 23:50:25 +0300 Paul Sokolovsky paul.sokolovsky@linaro.org wrote:
Hello Milosz,
I appreciate getting at least some response ;-). Some questions however could use a reply from LAVA team, I guess.
On Mon, 3 Jul 2017 13:34:49 +0100 Milosz Wasilewski milosz.wasilewski@linaro.org wrote:
[]
jobs submit a number of tests to LAVA (via https://qa-reports.linaro.org/) for the following boards: arduino_101, frdm_k64f, frdm_kw41z, qemu_cortex_m3. Here's an example of cumulative test report for these platforms: https://qa-reports.linaro.org/lite/zephyr-upstream/tests/
That's really great! (Though the list of tests to run in LAVA seems to be hardcoded: https://git.linaro.org/ci/job/configs.git/tree/zephyr-upstream/submit_for_te...)
It is, as I wasn't really sure what to test. The build job needs to prepare the test templates to be submitted to LAVA. In case of zephyr each tests is a separate binary. So we end up with the number of file paths to substitute in the template. Hardcoding was the easiest thing to get things running. But I see no reason why it wouldn't be changed with some smarter code to discover the binaries. The problem with this approach is that some of these tests are just build time. They have no meaning when running on the board and need to be filter out somehow.
Running the build tests within the Jenkins build makes a lot of sense. Typically, the build tests will have a different command syntax to the runtime tests (otherwise Jenkins would attempt to run both), so filtering should be possible. If the build tests are just a different set of binary blobs from the runtime tests, that may need a fix upstream in Zephyr to distinguish between the two modes.
I see, that makes some sense. But thinking further, I'm not entirely sure about "build only" tests. Zephyr's sanitycheck test has such concept, but I'd imagine it comes from the following reasons: a) sanitycheck runs tests on QEMU, which has very bare hardware support, so many tests are not runnable; b) sanitycheck can operate on "samples", not just "tests", as sample can be interactive, etc. it makes sense to only build them, not run.
So, I'm not exactly sure about build-only tests on real HW boards. The "default" idea would be that they should run, but I imagine in reality, some may need to be filtered out. But then blacklisting would be better approach than whitelisting. And I'm not sure if Zephyr has concept of "skipped" tests which may be useful to handle hardware variations. (Well, I actually dunno if LAVA supports skipped tests!)
Yes, LAVA has support for pass, fail, skip, unknown.
For POSIX shell tests, the test writer just calls lava-test-case name --result skip
For monitor tests, like Zephyr, it's down to the pattern but skip is as valid as pass and fail (as is unknown) for the result of the matches within the pattern.
Anyway, these are rough ideas for the future. I've spent couple of weeks of munging with LITE CI setup, there're definitely some improvements, but also a Pandora box of other ideas and improvements to make. I'm wrapping up for now, but hope to look again in some time (definitely hope to look before the Connect, so we can discuss further steps there). In the meantime, I hope that more boards will be installed in the Lab and stability of them improves (so far they seem to be pretty flaky).
There are known limitations with the USB subsystem and associated hardware across all architectures, affecting test devices and the workers which run the automation. LAVA has to drive that subsystem very hard for both fastboot devices and IoT devices. There are also problems due to the design of methods like fastboot and some of the IoT support which result from a single-developer model, leading to buggy performance when used at scale and added complexity in deploying workarounds to isolate such protocols in order to prevent interference between tests. The protocols themselves often lack robust error handling or retry support.
Other deployment methods which rely on TFTP/network deployments are massively more reliable at scale, so comparing reliability across different device types is problematic.
[]
- test: monitors:
- name: foo start: "" end: Hello, ZJS world! pattern: (?P<result>(PASS|FAIL))\s-\s(?P<test_case_id>\w+).
So, the "start" substring is empty, and perhaps matches a line output by a USB multiplexer or board bootloader. "End" substring is actually the expected single-line output. And "pattern" is unused (dunno if it can be dropped without def file syntax error). Is there a better way to handle single-line test output?
You're making a silent assumption that if there is a matching line, the test is passed. In case of other tests (zephyr unit tests), it's not the case. The 'start' matches some line which is displayed when zephyr is booting. End matches the line which is displayed after all testing is done. The pattern follows the unit test pattern.
Thanks, but I'm not sure I understand this response. I don't challenge that Zephyr unittests need this support, or the way they're handled. LITE however needs to test more things than "batch" Zephyr unittests. I present another usercase which albeit simple, barely supported by LAVA. (That's a question to LAVA team definitely.)
LAVA result handling is ultimately a pattern matching system. Patterns must have a unique and reliable start string and a unique and reliable end string. An empty start string is just going to cause misleading results and bad pattern matches as the reality is that most boards emit some level of random junk immediately upon connection which needs to be ignored. So there needs to be a reliable, unique, start string emitted by the test device. It is not enough to *assume* a start at line zero, doing so increases the problems with reliability.
Well, beyond a simple output matching, it would be nice even for the initial "smoke testing" to actually make some input into the application and check the expected output (e.g., input: "2+2", expected output: "4"). Is this already supported for LAVA "v2" pipeline tests? I may imagine that would be the same kind of functionality required to test bootloaders like U-boot for Linux boards.
I didn't use anything like this in v2 so far, but you're probably best off doing sth like
test 2+2=4 PASS.
than you can easily create pattern that will filter the output. In case of zephyr pattern is the only way to filter things out as there is no shell (?) on the board.
So, the problem, for starters, is how to make LAVA *feed* the input, as specified in the test definition (like "2+2") into a board.
That will need code changes, so please make a formal request for this support at CTT https://projects.linaro.org/servicedesk/customer/portal/1 so that we can track exactly what is required.
As there were no reply from LAVA team (I may imagine they're busy with other things), I decided to create a user story in Jira for them, as I couldn't create a LAVA-* ticket, I created it as https://projects.linaro.org/browse/LITE-175 . Hopefully that won't go unnoticed and LAVA team would get to it eventually.
That JIRA story is in the LITE project. Nobody in the LAVA team can manage those stories. It needs a CTT issue which can then be linked to the LITE story and from which a LAVA story can also be linked.
Sadly, any story in the LITE project would go completely unnoticed by the LAVA software team until it is linked to CTT so that the work can be prioritised and the relevant LAVA story created. That's just how JIRA works.
milosz
Thanks!
-- Best Regards, Paul
Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#%21/linaroorg - http://www.linaro.org/linaro-blog _______________________________________________ linaro-validation mailing list linaro-validation@lists.linaro.org https://lists.linaro.org/mailman/listinfo/linaro-validation
Hello Neil,
On Tue, 4 Jul 2017 07:54:30 +0100 Neil Williams codehelp@debian.org wrote:
[]
Yes, LAVA has support for pass, fail, skip, unknown.
For POSIX shell tests, the test writer just calls lava-test-case name --result skip
For monitor tests, like Zephyr, it's down to the pattern but skip is as valid as pass and fail (as is unknown) for the result of the matches within the pattern.
Thanks, now that you said it, I remembered that some years ago I saw them all ;-). Thanks for confirming!
[]
There are known limitations with the USB subsystem and associated hardware across all architectures, affecting test devices and the workers which run the automation. LAVA has to drive that subsystem very hard for both fastboot devices and IoT devices. There are also problems due to the design of methods like fastboot and some of the IoT support which result from a single-developer model, leading to buggy performance when used at scale and added complexity in deploying workarounds to isolate such protocols in order to prevent interference between tests. The protocols themselves often lack robust error handling or retry support.
Yes, I understand all the complexity of it. But I'd hope that ability to power off both a device and USB hub connecting it would be the ultimate solution to such issues. Anyway, I guess this time, the question is more for the Lab team, not the LAVA team.
[]
LAVA result handling is ultimately a pattern matching system. Patterns must have a unique and reliable start string and a unique and reliable end string. An empty start string is just going to cause misleading results and bad pattern matches as the reality is that most boards emit some level of random junk immediately upon connection which needs to be ignored. So there needs to be a reliable, unique, start string emitted by the test device. It is not enough to *assume* a start at line zero, doing so increases the problems with reliability.
Good to know, and I generally agree. But with a real usecase of testing something which outputs just a single line, the only option is then to modify "device under test", which isn't always desirable and shows LAVA's inflexibility. Well, at least there's a workaround which works well enough, and hopefully will keep working ;-).
[]
That will need code changes, so please make a formal request for this support at CTT https://projects.linaro.org/servicedesk/customer/portal/1 so that we can track exactly what is required.
Thanks, now done as https://projects.linaro.org/servicedesk/customer/portal/1/CTT-413
[]
linaro-validation@lists.linaro.org
-
Milosz Wasilewski -
Neil Williams -
Paul Sokolovsky