Adding the group... since Andy's out.
On 20 December 2012 09:54, YongQin Liu yongqin.liu@linaro.org wrote:
Hi, Andy
Or if it's OK, could you add me to the sudoers of fastmodels02, then I can change it myself. And also I can do some necessary modification next week when you are in holiday.
Thanks, Yongqin Liu
On 20 December 2012 19:11, YongQin Liu yongqin.liu@linaro.org wrote:
Hi, Andy
could you help to add the following config to the boot_options of the fastmodel_v8.conf file on fastmodels02,
motherboard.hostbridge.userNetPorts='5555=5555' motherboard.hostbridge.userNetworking=true motherboard.smsc_91c111.enabled=1
I don't have permission to do that on fastmodels02
-- Thanks, Yongqin Liu
#mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android linaro-validation@lists.linaro.org http://lists.linaro.org/pipermail/linaro-validation
-- Thanks, Yongqin Liu
#mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android linaro-validation@lists.linaro.org http://lists.linaro.org/pipermail/linaro-validation
On 12/20/2012 11:04 AM, Zach Pfeffer wrote:
Adding the group... since Andy's out.
actually - I just completed the request. please read below:
On 20 December 2012 09:54, YongQin Liu yongqin.liu@linaro.org wrote:
Hi, Andy
Or if it's OK, could you add me to the sudoers of fastmodels02, then I can change it myself. And also I can do some necessary modification next week when you are in holiday.
I'd prefer not to make you a sudoer for 2 reasons:
1) This should really have included a merge proposal to update the device config in lp:lava-dispatcher. I've updated that here:
http://bazaar.launchpad.net/~linaro-validation/lava-dispatcher/trunk/revisio...
2) We are now managing device configs in our lab using a tool called "salt" and we are trying to keep people from manually changing things like this. Since I didn't want to do a new release of the dispatcher, I added this to our salt config:
http://bazaar.launchpad.net/~linaro-validation/lava-lab/salt-states/revision...
And have deployed this to fastmodels02.
Thanks, Yongqin Liu
On 20 December 2012 19:11, YongQin Liu yongqin.liu@linaro.org wrote:
Hi, Andy
could you help to add the following config to the boot_options of the fastmodel_v8.conf file on fastmodels02,
motherboard.hostbridge.userNetPorts='5555=5555' motherboard.hostbridge.userNetworking=true motherboard.smsc_91c111.enabled=1
These look fine to me.
I don't have permission to do that on fastmodels02
On 20 December 2012 11:10, Andy Doan andy.doan@linaro.org wrote:
On 12/20/2012 11:04 AM, Zach Pfeffer wrote:
Adding the group... since Andy's out.
actually - I just completed the request. please read below:
On 20 December 2012 09:54, YongQin Liu yongqin.liu@linaro.org wrote:
Hi, Andy
Or if it's OK, could you add me to the sudoers of fastmodels02, then I can change it myself. And also I can do some necessary modification next week when you are in holiday.
I'd prefer not to make you a sudoer for 2 reasons:
- This should really have included a merge proposal to update the device
config in lp:lava-dispatcher. I've updated that here:
http://bazaar.launchpad.net/~linaro-validation/lava-dispatcher/trunk/revisio...
- We are now managing device configs in our lab using a tool called "salt"
and we are trying to keep people from manually changing things like this. Since I didn't want to do a new release of the dispatcher, I added this to our salt config:
http://bazaar.launchpad.net/~linaro-validation/lava-lab/salt-states/revision...
And have deployed this to fastmodels02.
Thanks, Yongqin Liu
On 20 December 2012 19:11, YongQin Liu yongqin.liu@linaro.org wrote:
Hi, Andy
could you help to add the following config to the boot_options of the fastmodel_v8.conf file on fastmodels02,
motherboard.hostbridge.userNetPorts='5555=5555' motherboard.hostbridge.userNetworking=true motherboard.smsc_91c111.enabled=1
These look fine to me.
Thanks Andy! YongQin and Andy, is there anything else that needs to get done to ensure these builds can run in LAVA and execute the existing test cases (the new test cases will been done using the blackbox infrastructure).
I don't have permission to do that on fastmodels02
Hi, Andy
Thanks for the help. But seems there is a typo there:
<LAVA_DISPATCHER>2012-12-21 05:58:06 AM WARNING: section(motherboard.hostbridge.userNetworking) contains unknown item: (u'defaulti', u'1') <LAVA_DISPATCHER>2012-12-21 05:58:06 AM WARNING: section(motherboard.smsc_91c111.enabled) contains unknown item: (u'defaulti', u'1')
I have updated the two branches:
http://bazaar.launchpad.net/~linaro-validation/lava-dispatcher/trunk/revisio...
http://bazaar.launchpad.net/~linaro-validation/lava-lab/salt-states/revision...
Could you help to update the fastmodels02?
Thanks,
Yongqin Liu
On 21 December 2012 01:10, Andy Doan andy.doan@linaro.org wrote:
On 12/20/2012 11:04 AM, Zach Pfeffer wrote:
Adding the group... since Andy's out.
actually - I just completed the request. please read below:
On 20 December 2012 09:54, YongQin Liu yongqin.liu@linaro.org wrote:
Hi, Andy
Or if it's OK, could you add me to the sudoers of fastmodels02, then I can change it myself. And also I can do some necessary modification next week when you are in holiday.
I'd prefer not to make you a sudoer for 2 reasons:
- This should really have included a merge proposal to update the device
config in lp:lava-dispatcher. I've updated that here:
http://bazaar.launchpad.net/~**linaro-validation/lava-** dispatcher/trunk/revision/512http://bazaar.launchpad.net/~linaro-validation/lava-dispatcher/trunk/revision/512
- We are now managing device configs in our lab using a tool called
"salt" and we are trying to keep people from manually changing things like this. Since I didn't want to do a new release of the dispatcher, I added this to our salt config:
http://bazaar.launchpad.net/~**linaro-validation/lava-lab/** salt-states/revision/22http://bazaar.launchpad.net/~linaro-validation/lava-lab/salt-states/revision/22
And have deployed this to fastmodels02.
Thanks,
Yongqin Liu
On 20 December 2012 19:11, YongQin Liu yongqin.liu@linaro.org wrote:
Hi, Andy
could you help to add the following config to the boot_options of the fastmodel_v8.conf file on fastmodels02,
motherboard.hostbridge.**userNetPorts='5555=5555' motherboard.hostbridge.**userNetworking=true motherboard.smsc_91c111.**enabled=1
These look fine to me.
I don't have permission to do that on fastmodels02
On 12/21/2012 05:01 AM, YongQin Liu wrote:
<LAVA_DISPATCHER>2012-12-21 05:58:06 AM WARNING: section(motherboard.hostbridge.userNetworking) contains unknown item: (u'defaulti', u'1') <LAVA_DISPATCHER>2012-12-21 05:58:06 AM WARNING: section(motherboard.smsc_91c111.enabled) contains unknown item: (u'defaulti', u'1')
I have updated the two branches:
http://bazaar.launchpad.net/~linaro-validation/lava-dispatcher/trunk/revisio... http://bazaar.launchpad.net/%7Elinaro-validation/lava-dispatcher/trunk/revision/513
http://bazaar.launchpad.net/~linaro-validation/lava-lab/salt-states/revision... http://bazaar.launchpad.net/%7Elinaro-validation/lava-lab/salt-states/revision/23
Could you help to update the fastmodels02?
applied. sorry it took so long.
Hi, All
Thanks for the help from holiday, Andy!
Sometimes we can run the test on LAVA although most of them are failed, like https://validation.linaro.org/lava-server/scheduler/job/43280/log_file
but we still have the problem that the shell prompt is not displayed on the console, like https://validation.linaro.org/lava-server/scheduler/job/43282/log_file
And another problem I found is that the the reboot is not well supported, like in #43280
terminal_0: Listening for serial connection on port 5004
<LAVA_DISPATCHER>2012-12-27 08:35:02 PM INFO: serial console port on: 5004
terminal_1: Listening for serial connection on port 5005
terminal_2: Listening for serial connection on port 5006
terminal_3: Listening for serial connection on port 5007
ERROR: License check failed!
All licenses 'AEM_ARMv8-A_VE' are currently in use.
Number of licenses requested: 1
Error Code : -4
Thanks,
Yongqin Liu
On 27 December 2012 04:17, Andy Doan andy.doan@linaro.org wrote:
On 12/21/2012 05:01 AM, YongQin Liu wrote:
<LAVA_DISPATCHER>2012-12-21 05:58:06 AM WARNING: section(motherboard.**hostbridge.userNetworking) contains unknown item: (u'defaulti', u'1') <LAVA_DISPATCHER>2012-12-21 05:58:06 AM WARNING: section(motherboard.smsc_ **91c111.enabled) contains unknown item: (u'defaulti', u'1')
I have updated the two branches:
http://bazaar.launchpad.net/~**linaro-validation/lava-** dispatcher/trunk/revision/513http://bazaar.launchpad.net/~linaro-validation/lava-dispatcher/trunk/revision/513 < http://bazaar.launchpad.net/%**7Elinaro-validation/lava-** dispatcher/trunk/revision/513http://bazaar.launchpad.net/%7Elinaro-validation/lava-dispatcher/trunk/revision/513
http://bazaar.launchpad.net/~**linaro-validation/lava-lab/** salt-states/revision/23http://bazaar.launchpad.net/~linaro-validation/lava-lab/salt-states/revision/23 < http://bazaar.launchpad.net/%**7Elinaro-validation/lava-lab/** salt-states/revision/23http://bazaar.launchpad.net/%7Elinaro-validation/lava-lab/salt-states/revision/23
Could you help to update the fastmodels02?
applied. sorry it took so long.
On 12/27/2012 07:56 PM, YongQin Liu wrote:
Hi, All
Thanks for the help from holiday, Andy!
Sometimes we can run the test on LAVA although most of them are failed, like https://validation.linaro.org/lava-server/scheduler/job/43280/log_file
but we still have the problem that the shell prompt is not displayed on the console, like https://validation.linaro.org/lava-server/scheduler/job/43282/log_file
This looks to me like an issue with the android image itself. Unless you think we need to increase the wait-for-root console timeout to give it more time?
And another problem I found is that the the reboot is not well supported, like in #43280
terminal_0: Listening for serial connection on port 5004 <LAVA_DISPATCHER>2012-12-27 08:35:02 PM INFO: serial console port on: 5004 terminal_1: Listening for serial connection on port 5005 terminal_2: Listening for serial connection on port 5006 terminal_3: Listening for serial connection on port 5007 ERROR: License check failed! All licenses 'AEM_ARMv8-A_VE' are currently in use. Number of licenses requested: 1 Error Code : -4
This looks like a probable bug. Based on a quick grep, I think the issue comes from lava-dispatcher's job.py, line 197. We call "boot_linaro_android_image" for a timeout exception. I think the boot logic in fastmodel.py might not take into account its already booted. ie - we need to shutdown, then boot. Feel free to open a bug or send us a patch.
The timeout causing this problem might be an issue itself, but I haven't looked at that.
On 28 December 2012 22:33, Andy Doan andy.doan@linaro.org wrote:
On 12/27/2012 07:56 PM, YongQin Liu wrote:
Hi, All
Thanks for the help from holiday, Andy!
Sometimes we can run the test on LAVA although most of them are failed, like https://validation.linaro.org/**lava-server/scheduler/job/** 43280/log_filehttps://validation.linaro.org/lava-server/scheduler/job/43280/log_file
but we still have the problem that the shell prompt is not displayed on the console, like https://validation.linaro.org/**lava-server/scheduler/job/** 43282/log_filehttps://validation.linaro.org/lava-server/scheduler/job/43282/log_file
This looks to me like an issue with the android image itself. Unless you think we need to increase the wait-for-root console timeout to give it more time?
And another problem I found is that the the reboot is not well
supported, like in #43280
terminal_0: Listening for serial connection on port 5004 <LAVA_DISPATCHER>2012-12-27 08:35:02 PM INFO: serial console port on:5004
terminal_1: Listening for serial connection on port 5005 terminal_2: Listening for serial connection on port 5006 terminal_3: Listening for serial connection on port 5007 ERROR: License check failed! All licenses 'AEM_ARMv8-A_VE' are currently in use. Number of licenses requested: 1 Error Code : -4This looks like a probable bug. Based on a quick grep, I think the issue comes from lava-dispatcher's job.py, line 197. We call "boot_linaro_android_image" for a timeout exception. I think the boot logic in fastmodel.py might not take into account its already booted. ie - we need to shutdown, then boot. Feel free to open a bug or send us a patch.
I filed a bug here:
https://bugs.launchpad.net/lava-dispatcher/+bug/1094445
linaro-validation@lists.linaro.org
-
Andy Doan -
YongQin Liu -
Zach Pfeffer