Cool, thanks. Can you deploy that to production? My filter could not pick it from your test job even though it is same stream bundle.

On 10 February 2015 at 22:20, YongQin Liu yongqin.liu@linaro.org wrote:

Hi, All

And from the data in the "Bundle Viewer" tab of this page:

https://validation.linaro.org/dashboard/streams/private/team/wg/wg-private/b...

The units information is there too.

Thanks, Yongqin Liu

On 10 February 2015 at 22:08, YongQin Liu yongqin.liu@linaro.org wrote:

...

Hi, All

I have a test that without units generated before. now I added the units part for the test result.

From the output here, the parsing of the result should be right: https://validation.linaro.org/scheduler/job/257061/log_file#L_9

but the units information are not shown in the result bundle page:

https://validation.linaro.org/dashboard/streams/private/team/wg/wg-private/b...

Anyone can help to check what's the problem there?

If it is because that the tests before does not have unit information, please tell me how to make the unit information displayed now?

Thanks in advance!

-- Best Regards, Yongqin Liu

---

#mailing list linaro-android@lists.linaro.org linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android

-- Best Regards, Yongqin Liu

---

#mailing list linaro-android@lists.linaro.org linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android

Hi, Stevan

Seems similar problem, Just for you information: After I changed the test name. the unit is displayed in the result bundle page. If I did not change the test name, the unit information will not be displayed even I submitted to another different bundle stream.

Thanks, Yongqin Liu

On 11 February 2015 at 10:09, Stevan Radakovic stevan.radakovic@linaro.org wrote:

I think what you bumped into is https://bugs.linaro.org/show_bug.cgi?id=909 I'll take a look into it asap.

On 02/10/2015 04:27 PM, Jakub Pavelek wrote:

Cool, thanks. Can you deploy that to production? My filter could not pick it from your test job even though it is same stream bundle.

On 10 February 2015 at 22:20, YongQin Liu yongqin.liu@linaro.org wrote:

...

Hi, All

And from the data in the "Bundle Viewer" tab of this page:

https://validation.linaro.org/dashboard/streams/private/team/wg/wg-private/b...

The units information is there too.

Thanks, Yongqin Liu

On 10 February 2015 at 22:08, YongQin Liu yongqin.liu@linaro.org wrote:

...

Hi, All

I have a test that without units generated before. now I added the units part for the test result.

From the output here, the parsing of the result should be right: https://validation.linaro.org/scheduler/job/257061/log_file#L_9

but the units information are not shown in the result bundle page:

https://validation.linaro.org/dashboard/streams/private/team/wg/wg-private/b...

Anyone can help to check what's the problem there?

If it is because that the tests before does not have unit information, please tell me how to make the unit information displayed now?

Thanks in advance!

-- Best Regards, Yongqin Liu

---

#mailing list linaro-android@lists.linaro.org linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android

-- Best Regards, Yongqin Liu

---

#mailing list linaro-android@lists.linaro.org linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android

-- With best regards,

Jakub Pavelek

Linaro Mobile Group project manager Linaro.org│Open source software for ARM SoCs

---

linaro-validation mailing listlinaro-validation@lists.linaro.orghttp://lists.linaro.org/mailman/listinfo/linaro-validation

-- Stevan Radaković | LAVA Engineer Linaro.org <www.linaro.org> │ Open source software for ARM SoCs

The implications of https://bugs.linaro.org/show_bug.cgi?id=909 are more extending then I imagined. I discovered at least two problems with units while digging around. Given in the account that this is not gonna be a straightforward fix and that it's not going to make it into ongoing LAVA release (15.01) I suppose that changing the test suite name is the only current available workaround. Sorry about that. I will give this bug a highest priority after the connect tho.

Cheers,

On 02/11/2015 08:52 AM, Jakub Pavelek wrote:

It worked, thanks all. We have the first data points visualized already at bottom of https://validation.linaro.org/dashboard/image-charts/LMG

Too bad we had to change the test (suite) name to get it showing the units :-/ Is that ImageReports 1.0 only issue or affecting also 2.0? That is worth a bug report and means we (Milosz) will have to rename our benchmarking test suite when he introduces units there.

On 11 February 2015 at 15:24, YongQin Liu <yongqin.liu@linaro.org mailto:yongqin.liu@linaro.org> wrote:

Hi, Stevan

Seems similar problem,
Just for you information:
After I changed the test name. the unit is displayed in the result
bundle page.
If I did not change the test name, the unit information will not
be displayed even I submitted to another different bundle stream.

Thanks,
Yongqin Liu

On 11 February 2015 at 10:09, Stevan Radakovic
<stevan.radakovic@linaro.org <mailto:stevan.radakovic@linaro.org>>
wrote:

    I think what you bumped into is
    https://bugs.linaro.org/show_bug.cgi?id=909
    I'll take a look into it asap.



    On 02/10/2015 04:27 PM, Jakub Pavelek wrote:

...

    Cool, thanks. Can you deploy that to production? My filter
    could not pick it from your test job even though it is same
    stream bundle.

    On 10 February 2015 at 22:20, YongQin Liu
    <yongqin.liu@linaro.org <mailto:yongqin.liu@linaro.org>> wrote:

        Hi, All

        And from the data in the "Bundle Viewer" tab of this page:
        https://validation.linaro.org/dashboard/streams/private/team/wg/wg-private/bundles/71b9e9893cb90f5b73f7dfab7696bb83a89985fc/

        The units information is there too.

        Thanks,
        Yongqin Liu


        On 10 February 2015 at 22:08, YongQin Liu
        <yongqin.liu@linaro.org <mailto:yongqin.liu@linaro.org>>
        wrote:

            Hi, All

            I have a test that without units generated before.
            now I added the units part for the test result.

            From the output here, the parsing of the result
            should be right:
            https://validation.linaro.org/scheduler/job/257061/log_file#L_9

            but the units information are not shown in the result
            bundle page:
            https://validation.linaro.org/dashboard/streams/private/team/wg/wg-private/bundles/71b9e9893cb90f5b73f7dfab7696bb83a89985fc/e59463ae-cb2a-4f42-80e7-b9c59cba81d1/


            Anyone can help to check what's the problem there?

            If it is because that the tests before does not have
            unit information,
            please tell me how to make the unit information
            displayed now?

            Thanks in advance!

            -- 
            Best Regards,
            Yongqin Liu
            ---------------------------------------------------------------
            #mailing list
            linaro-android@lists.linaro.org
            <mailto:linaro-dev@lists.linaro.org>
            http://lists.linaro.org/mailman/listinfo/linaro-android




        -- 
        Best Regards,
        Yongqin Liu
        ---------------------------------------------------------------
        #mailing list
        linaro-android@lists.linaro.org
        <mailto:linaro-dev@lists.linaro.org>
        http://lists.linaro.org/mailman/listinfo/linaro-android




    -- 
    With best regards,

    Jakub Pavelek

    Linaro Mobile Group project manager
    Linaro.org│Open source software for ARM SoCs



    _______________________________________________
    linaro-validation mailing list
    linaro-validation@lists.linaro.org  <mailto:linaro-validation@lists.linaro.org>
    http://lists.linaro.org/mailman/listinfo/linaro-validation

    -- 
    Stevan Radaković | LAVA Engineer
    Linaro.org <www.linaro.org  <http://www.linaro.org>> │ Open source software for ARM SoCs




-- 
Best Regards,
Yongqin Liu
---------------------------------------------------------------
#mailing list
linaro-android@lists.linaro.org <mailto:linaro-dev@lists.linaro.org>
http://lists.linaro.org/mailman/listinfo/linaro-android

-- With best regards,

Jakub Pavelek

Linaro Mobile Group project manager Linaro.org│Open source software for ARM SoCs