Hi Dave,
I am hoping that probably you might be working on this ticket https://cards.linaro.org/browse/CARD-832 (got from Kanta, although I get permission denied when accessing the card), if not please anyone in the wider validation email group please redirect me appropriately.
With 13.09 we do have the new Base model variants released and with the above ticket we expect to have LAVA support for these models also.
Since we do have a local LAVA instance, I would like to figure out how we can pick the upgrades and apply to our local instance. Could anyone please advice when we could expect this upgrade to LAVA for supporting 64-bit base models, coming our way?
I want to get Dean a heads-up in terms of his plan to get our setup upgraded.
Thanks Basil Eljuse...
-- IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2557590 ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2548782
Hello Basil; That is the correct card, You'll want to contact ITS@linaro.org/Kanta if you can't see them, From my end, as long as you are logged in, you should be able to see them.
The models are not yet available in production LAVA, we didn't receive them until after they were released, so we are now working to incorporate them. Kanta has us down for a few weeks on her schedule, have you seen this? The optimist in me says things will go much quicker, but we have encountered a few differences already that we are still working on. Right now we have the new models 'working', but we are working on a few regressions before we'll be ready to release this. Shouldn't be long...
You can see the early progress here. http://community.validation.linaro.org/scheduler/job/1596 http://community.validation.linaro.org/scheduler/job/1595 http://community.validation.linaro.org/scheduler/job/1594
Alan
On 29 September 2013 08:33, Basil Eljuse Basil.Eljuse@arm.com wrote:
Hi Dave,****
I am hoping that probably you might be working on this ticket https://cards.linaro.org/browse/CARD-832 (got from Kanta, although I get permission denied when accessing the card), if not please anyone in the wider validation email group please redirect me appropriately.****
With 13.09 we do have the new Base model variants released and with the above ticket we expect to have LAVA support for these models also.****
Since we do have a local LAVA instance, I would like to figure out how we can pick the upgrades and apply to our local instance. Could anyone please advice when we could expect this upgrade to LAVA for supporting 64-bit base models, coming our way?****
I want to get Dean a heads-up in terms of his plan to get our setup upgraded. ****
Thanks****
Basil Eljuse…****
-- IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2557590 ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2548782
linaro-validation mailing list linaro-validation@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-validation
Hi Alan,
Cool. Yes I am aware of the 2 week activity for this LAVA integration. I wanted to align ourselves in timeline with your upcoming release. Thanks a lot for the clarifications.
Do let us know when it is good for us to pick up.
Thanks Basil Eljuse…
From: Alan Bennett [mailto:alan.bennett@linaro.org] Sent: 30 September 2013 16:08 To: Basil Eljuse Cc: Linaro Validation; Dave Pigott; Dean Arnold; Tyler Baker Subject: Re: [Linaro-validation] LAVA upgrade for 64-bit models support...
Hello Basil; That is the correct card, You'll want to contact ITS@linaro.org/Kantahttp://ITS@linaro.org/Kanta if you can't see them, From my end, as long as you are logged in, you should be able to see them.
The models are not yet available in production LAVA, we didn't receive them until after they were released, so we are now working to incorporate them. Kanta has us down for a few weeks on her schedule, have you seen this? The optimist in me says things will go much quicker, but we have encountered a few differences already that we are still working on. Right now we have the new models 'working', but we are working on a few regressions before we'll be ready to release this. Shouldn't be long...
You can see the early progress here. http://community.validation.linaro.org/scheduler/job/1596 http://community.validation.linaro.org/scheduler/job/1595 http://community.validation.linaro.org/scheduler/job/1594
Alan
On 29 September 2013 08:33, Basil Eljuse <Basil.Eljuse@arm.commailto:Basil.Eljuse@arm.com> wrote: Hi Dave,
I am hoping that probably you might be working on this ticket https://cards.linaro.org/browse/CARD-832 (got from Kanta, although I get permission denied when accessing the card), if not please anyone in the wider validation email group please redirect me appropriately.
With 13.09 we do have the new Base model variants released and with the above ticket we expect to have LAVA support for these models also.
Since we do have a local LAVA instance, I would like to figure out how we can pick the upgrades and apply to our local instance. Could anyone please advice when we could expect this upgrade to LAVA for supporting 64-bit base models, coming our way?
I want to get Dean a heads-up in terms of his plan to get our setup upgraded.
Thanks Basil Eljuse…
-- IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2557590 ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2548782
_______________________________________________ linaro-validation mailing list linaro-validation@lists.linaro.orgmailto:linaro-validation@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-validation
--
Alan Bennett, Engineering Manager, Linaro LAVA Team Linaro.orghttp://www.linaro.org/ │ Open source software for ARM SoCs | Follow Linaro: Facebookhttp://www.facebook.com/pages/Linaro | Twitterhttp://twitter.com/#%21/linaroorg | Bloghttp://www.linaro.org/linaro-blog/ irc: akbennett | alan.bennett@linaro.orgmailto:alan.bennett@linaro.org | linaro-validation@lists.linaro.orgmailto:linaro-validation@lists.linaro.org
-- IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2557590 ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2548782
Hi Basil,
Is your local LAVA server still using bzr? I ask because we have recently moved all the LAVA code to git. If you have not made the switch you will want to fetch our deployment tool from git.
git clone http://staging.git.linaro.org/git/lava/lava-deployment-tool.git cd lava-deployment-tool ./lava-deployment-tool setup ./lava-deployment-tool upgrade <instance>
Cheers,
On 30 September 2013 08:14, Basil Eljuse Basil.Eljuse@arm.com wrote:
Hi Alan,****
Cool. Yes I am aware of the 2 week activity for this LAVA integration. I wanted to align ourselves in timeline with your upcoming release. Thanks a lot for the clarifications.****
Do let us know when it is good for us to pick up.****
Thanks****
Basil Eljuse…****
*From:* Alan Bennett [mailto:alan.bennett@linaro.org] *Sent:* 30 September 2013 16:08 *To:* Basil Eljuse *Cc:* Linaro Validation; Dave Pigott; Dean Arnold; Tyler Baker *Subject:* Re: [Linaro-validation] LAVA upgrade for 64-bit models support...****
Hello Basil;****
That is the correct card, You'll want to contact ITS@linaro.org/Kantaif you can't see them, From my end, as long as you are logged in, you should be able to see them. ****
The models are not yet available in production LAVA, we didn't receive them until after they were released, so we are now working to incorporate them. Kanta has us down for a few weeks on her schedule, have you seen this? The optimist in me says things will go much quicker, but we have encountered a few differences already that we are still working on. Right now we have the new models 'working', but we are working on a few regressions before we'll be ready to release this. Shouldn't be long...** **
You can see the early progress here. ****
http://community.validation.linaro.org/scheduler/job/1596****
http://community.validation.linaro.org/scheduler/job/1595****
http://community.validation.linaro.org/scheduler/job/1594****
Alan****
On 29 September 2013 08:33, Basil Eljuse Basil.Eljuse@arm.com wrote:****
Hi Dave,****
I am hoping that probably you might be working on this ticket https://cards.linaro.org/browse/CARD-832 (got from Kanta, although I get permission denied when accessing the card), if not please anyone in the wider validation email group please redirect me appropriately.****
With 13.09 we do have the new Base model variants released and with the above ticket we expect to have LAVA support for these models also.****
Since we do have a local LAVA instance, I would like to figure out how we can pick the upgrades and apply to our local instance. Could anyone please advice when we could expect this upgrade to LAVA for supporting 64-bit base models, coming our way?****
I want to get Dean a heads-up in terms of his plan to get our setup upgraded. ****
Thanks****
Basil Eljuse…****
-- IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2557590 ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2548782****
linaro-validation mailing list linaro-validation@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-validation****
-- ****
Alan Bennett, Engineering Manager, Linaro LAVA Team Linaro.org http://www.linaro.org/* **│ *Open source software for ARM SoCs | Follow Linaro*:** *Facebook http://www.facebook.com/pages/Linaro | Twitter http://twitter.com/#%21/linaroorg | Bloghttp://www.linaro.org/linaro-blog/ irc: akbennett | alan.bennett@linaro.org | linaro-validation@lists.linaro.org****
-- IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2557590 ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2548782
Hi Tyler,
Dean confirmed that he will try on our staging area from the git source. We are still on bzr so far.
Thanks Basil Eljuse…
From: Tyler Baker [mailto:tyler.baker@linaro.org] Sent: 30 September 2013 16:31 To: Basil Eljuse Cc: Alan Bennett; Linaro Validation; Dave Pigott; Dean Arnold Subject: Re: [Linaro-validation] LAVA upgrade for 64-bit models support...
Hi Basil,
Is your local LAVA server still using bzr? I ask because we have recently moved all the LAVA code to git. If you have not made the switch you will want to fetch our deployment tool from git.
git clone http://staging.git.linaro.org/git/lava/lava-deployment-tool.git cd lava-deployment-tool ./lava-deployment-tool setup ./lava-deployment-tool upgrade <instance>
Cheers,
On 30 September 2013 08:14, Basil Eljuse <Basil.Eljuse@arm.commailto:Basil.Eljuse@arm.com> wrote: Hi Alan,
Cool. Yes I am aware of the 2 week activity for this LAVA integration. I wanted to align ourselves in timeline with your upcoming release. Thanks a lot for the clarifications.
Do let us know when it is good for us to pick up.
Thanks Basil Eljuse…
From: Alan Bennett [mailto:alan.bennett@linaro.orgmailto:alan.bennett@linaro.org] Sent: 30 September 2013 16:08 To: Basil Eljuse Cc: Linaro Validation; Dave Pigott; Dean Arnold; Tyler Baker Subject: Re: [Linaro-validation] LAVA upgrade for 64-bit models support...
Hello Basil; That is the correct card, You'll want to contact ITS@linaro.org/Kantahttp://ITS@linaro.org/Kanta if you can't see them, From my end, as long as you are logged in, you should be able to see them.
The models are not yet available in production LAVA, we didn't receive them until after they were released, so we are now working to incorporate them. Kanta has us down for a few weeks on her schedule, have you seen this? The optimist in me says things will go much quicker, but we have encountered a few differences already that we are still working on. Right now we have the new models 'working', but we are working on a few regressions before we'll be ready to release this. Shouldn't be long...
You can see the early progress here. http://community.validation.linaro.org/scheduler/job/1596 http://community.validation.linaro.org/scheduler/job/1595 http://community.validation.linaro.org/scheduler/job/1594
Alan
On 29 September 2013 08:33, Basil Eljuse <Basil.Eljuse@arm.commailto:Basil.Eljuse@arm.com> wrote: Hi Dave,
I am hoping that probably you might be working on this ticket https://cards.linaro.org/browse/CARD-832 (got from Kanta, although I get permission denied when accessing the card), if not please anyone in the wider validation email group please redirect me appropriately.
With 13.09 we do have the new Base model variants released and with the above ticket we expect to have LAVA support for these models also.
Since we do have a local LAVA instance, I would like to figure out how we can pick the upgrades and apply to our local instance. Could anyone please advice when we could expect this upgrade to LAVA for supporting 64-bit base models, coming our way?
I want to get Dean a heads-up in terms of his plan to get our setup upgraded.
Thanks Basil Eljuse…
-- IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2557590 ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2548782
_______________________________________________ linaro-validation mailing list linaro-validation@lists.linaro.orgmailto:linaro-validation@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-validation
--
Alan Bennett, Engineering Manager, Linaro LAVA Team Linaro.orghttp://www.linaro.org/ │ Open source software for ARM SoCs | Follow Linaro: Facebookhttp://www.facebook.com/pages/Linaro | Twitterhttp://twitter.com/#%21/linaroorg | Bloghttp://www.linaro.org/linaro-blog/ irc: akbennett | alan.bennett@linaro.orgmailto:alan.bennett@linaro.org | linaro-validation@lists.linaro.orgmailto:linaro-validation@lists.linaro.org
-- IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2557590 ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2548782
-- Tyler Baker Technical Architect, LAVA Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#%21/linaroorg - http://www.linaro.org/linaro-blog
-- IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2557590 ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2548782
Hi Tyler/Alan,
Just to confirm. Dean has upgraded the deployment mode to git based repo rather than bzr repo.
It seems to have gone well except for one issue where we found abd installation affected and had to reinstall adb again after the upgrade.
So once you are ready from your end we are good to pick up your changes for 64bit basemodel support.
Thanks Basil Eljuse…
From: Basil Eljuse Sent: 30 September 2013 17:56 To: 'Tyler Baker' Cc: Alan Bennett; Linaro Validation; Dave Pigott; Dean Arnold Subject: RE: [Linaro-validation] LAVA upgrade for 64-bit models support...
Hi Tyler,
Dean confirmed that he will try on our staging area from the git source. We are still on bzr so far.
Thanks Basil Eljuse…
From: Tyler Baker [mailto:tyler.baker@linaro.org] Sent: 30 September 2013 16:31 To: Basil Eljuse Cc: Alan Bennett; Linaro Validation; Dave Pigott; Dean Arnold Subject: Re: [Linaro-validation] LAVA upgrade for 64-bit models support...
Hi Basil,
Is your local LAVA server still using bzr? I ask because we have recently moved all the LAVA code to git. If you have not made the switch you will want to fetch our deployment tool from git.
git clone http://staging.git.linaro.org/git/lava/lava-deployment-tool.git cd lava-deployment-tool ./lava-deployment-tool setup ./lava-deployment-tool upgrade <instance>
Cheers,
On 30 September 2013 08:14, Basil Eljuse <Basil.Eljuse@arm.commailto:Basil.Eljuse@arm.com> wrote: Hi Alan,
Cool. Yes I am aware of the 2 week activity for this LAVA integration. I wanted to align ourselves in timeline with your upcoming release. Thanks a lot for the clarifications.
Do let us know when it is good for us to pick up.
Thanks Basil Eljuse…
From: Alan Bennett [mailto:alan.bennett@linaro.orgmailto:alan.bennett@linaro.org] Sent: 30 September 2013 16:08 To: Basil Eljuse Cc: Linaro Validation; Dave Pigott; Dean Arnold; Tyler Baker Subject: Re: [Linaro-validation] LAVA upgrade for 64-bit models support...
Hello Basil; That is the correct card, You'll want to contact ITS@linaro.org/Kantahttp://ITS@linaro.org/Kanta if you can't see them, From my end, as long as you are logged in, you should be able to see them.
The models are not yet available in production LAVA, we didn't receive them until after they were released, so we are now working to incorporate them. Kanta has us down for a few weeks on her schedule, have you seen this? The optimist in me says things will go much quicker, but we have encountered a few differences already that we are still working on. Right now we have the new models 'working', but we are working on a few regressions before we'll be ready to release this. Shouldn't be long...
You can see the early progress here. http://community.validation.linaro.org/scheduler/job/1596 http://community.validation.linaro.org/scheduler/job/1595 http://community.validation.linaro.org/scheduler/job/1594
Alan
On 29 September 2013 08:33, Basil Eljuse <Basil.Eljuse@arm.commailto:Basil.Eljuse@arm.com> wrote: Hi Dave,
I am hoping that probably you might be working on this ticket https://cards.linaro.org/browse/CARD-832 (got from Kanta, although I get permission denied when accessing the card), if not please anyone in the wider validation email group please redirect me appropriately.
With 13.09 we do have the new Base model variants released and with the above ticket we expect to have LAVA support for these models also.
Since we do have a local LAVA instance, I would like to figure out how we can pick the upgrades and apply to our local instance. Could anyone please advice when we could expect this upgrade to LAVA for supporting 64-bit base models, coming our way?
I want to get Dean a heads-up in terms of his plan to get our setup upgraded.
Thanks Basil Eljuse…
-- IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2557590 ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2548782
_______________________________________________ linaro-validation mailing list linaro-validation@lists.linaro.orgmailto:linaro-validation@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-validation
--
Alan Bennett, Engineering Manager, Linaro LAVA Team Linaro.orghttp://www.linaro.org/ │ Open source software for ARM SoCs | Follow Linaro: Facebookhttp://www.facebook.com/pages/Linaro | Twitterhttp://twitter.com/#%21/linaroorg | Bloghttp://www.linaro.org/linaro-blog/ irc: akbennett | alan.bennett@linaro.orgmailto:alan.bennett@linaro.org | linaro-validation@lists.linaro.orgmailto:linaro-validation@lists.linaro.org
-- IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2557590 ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2548782
-- Tyler Baker Technical Architect, LAVA Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#%21/linaroorg - http://www.linaro.org/linaro-blog
-- IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2557590 ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2548782
Hi Basil,
On 4 October 2013 02:09, Basil Eljuse Basil.Eljuse@arm.com wrote:
Hi Tyler/Alan,****
Just to confirm. Dean has upgraded the deployment mode to git based repo rather than bzr repo.
Excellent news!
It seems to have gone well except for one issue where we found abd installation affected and had to reinstall adb again after the upgrade.***
So once you are ready from your end we are good to pick up your changes for 64bit basemodel support.
Here is the patchset, it has been tested. Awaiting final code review:
https://staging.review.linaro.org/#/c/78/
If you want to check out the models running:
rtsm_fvp_base-aemv8ahttp://community.validation.linaro.org/scheduler/device_type/rtsm_fvp_base-aemv8a :
http://community.validation.linaro.org/scheduler/job/1830
rtsm_fvp_base_cortex-a57x4-a53x4http://community.validation.linaro.org/scheduler/device_type/rtsm_fvp_base_cortex-a57x4-a53x4
http://community.validation.linaro.org/scheduler/job/1858
rtsm_fvp_base_cortex-a57x1-a53x1http://community.validation.linaro.org/scheduler/device_type/rtsm_fvp_base_cortex-a57x1-a53x1
http://community.validation.linaro.org/scheduler/job/1857
I'll let you know as soon as we have it available
Thanks****
Basil Eljuse…****
**
Cheers,
**
*From:* Basil Eljuse *Sent:* 30 September 2013 17:56 *To:* 'Tyler Baker' *Cc:* Alan Bennett; Linaro Validation; Dave Pigott; Dean Arnold *Subject:* RE: [Linaro-validation] LAVA upgrade for 64-bit models support...****
Hi Tyler,****
Dean confirmed that he will try on our staging area from the git source. We are still on bzr so far.****
Thanks****
Basil Eljuse…****
*From:* Tyler Baker [mailto:tyler.baker@linaro.orgtyler.baker@linaro.org]
*Sent:* 30 September 2013 16:31 *To:* Basil Eljuse *Cc:* Alan Bennett; Linaro Validation; Dave Pigott; Dean Arnold
*Subject:* Re: [Linaro-validation] LAVA upgrade for 64-bit models support...****
Hi Basil,****
Is your local LAVA server still using bzr? I ask because we have recently moved all the LAVA code to git. If you have not made the switch you will want to fetch our deployment tool from git.****
git clone http://staging.git.linaro.org/git/lava/lava-deployment-tool.git*
cd lava-deployment-tool****
./lava-deployment-tool setup****
./lava-deployment-tool upgrade <instance>****
Cheers,****
On 30 September 2013 08:14, Basil Eljuse Basil.Eljuse@arm.com wrote:****
Hi Alan,****
Cool. Yes I am aware of the 2 week activity for this LAVA integration. I wanted to align ourselves in timeline with your upcoming release. Thanks a lot for the clarifications.****
Do let us know when it is good for us to pick up.****
Thanks****
Basil Eljuse…****
*From:* Alan Bennett [mailto:alan.bennett@linaro.org] *Sent:* 30 September 2013 16:08 *To:* Basil Eljuse *Cc:* Linaro Validation; Dave Pigott; Dean Arnold; Tyler Baker *Subject:* Re: [Linaro-validation] LAVA upgrade for 64-bit models support...****
Hello Basil;****
That is the correct card, You'll want to contact ITS@linaro.org/Kantaif you can't see them, From my end, as long as you are logged in, you should be able to see them. ****
The models are not yet available in production LAVA, we didn't receive them until after they were released, so we are now working to incorporate them. Kanta has us down for a few weeks on her schedule, have you seen this? The optimist in me says things will go much quicker, but we have encountered a few differences already that we are still working on. Right now we have the new models 'working', but we are working on a few regressions before we'll be ready to release this. Shouldn't be long...** **
You can see the early progress here. ****
http://community.validation.linaro.org/scheduler/job/1596****
http://community.validation.linaro.org/scheduler/job/1595****
http://community.validation.linaro.org/scheduler/job/1594****
Alan****
On 29 September 2013 08:33, Basil Eljuse Basil.Eljuse@arm.com wrote:****
Hi Dave,****
I am hoping that probably you might be working on this ticket https://cards.linaro.org/browse/CARD-832 (got from Kanta, although I get permission denied when accessing the card), if not please anyone in the wider validation email group please redirect me appropriately.****
With 13.09 we do have the new Base model variants released and with the above ticket we expect to have LAVA support for these models also.****
Since we do have a local LAVA instance, I would like to figure out how we can pick the upgrades and apply to our local instance. Could anyone please advice when we could expect this upgrade to LAVA for supporting 64-bit base models, coming our way?****
I want to get Dean a heads-up in terms of his plan to get our setup upgraded. ****
Thanks****
Basil Eljuse…****
-- IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2557590 ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2548782****
linaro-validation mailing list linaro-validation@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-validation****
-- ****
Alan Bennett, Engineering Manager, Linaro LAVA Team Linaro.org http://www.linaro.org/* **│ *Open source software for ARM SoCs | Follow Linaro*: *Facebook http://www.facebook.com/pages/Linaro | Twitter http://twitter.com/#%21/linaroorg | Bloghttp://www.linaro.org/linaro-blog/ irc: akbennett | alan.bennett@linaro.org | linaro-validation@lists.linaro.org****
-- IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2557590 ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2548782****
-- ****
Tyler Baker Technical Architect, LAVA Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#%21/linaroorg - http://www.linaro.org/linaro-blog****
-- IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2557590 ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2548782
Hi Basil,
The production manifest has been updated, if you upgrade your server(s) you will pick up the new fastmodel changes.
* Make sure you have the latest linaro-image-tools installed on all servers (2013.09)
* https://github.com/EmbeddedAndroid/salt/tree/master/lava/devices/lava-worker... These are the device configurations I am using for reference.
Let me know if you have any questions.
Cheers,
On 4 October 2013 15:25, Tyler Baker tyler.baker@linaro.org wrote:
Hi Basil,
On 4 October 2013 02:09, Basil Eljuse Basil.Eljuse@arm.com wrote:
Hi Tyler/Alan,****
Just to confirm. Dean has upgraded the deployment mode to git based repo rather than bzr repo.
Excellent news!
It seems to have gone well except for one issue where we found abd installation affected and had to reinstall adb again after the upgrade.** **
So once you are ready from your end we are good to pick up your changes for 64bit basemodel support.
Here is the patchset, it has been tested. Awaiting final code review:
https://staging.review.linaro.org/#/c/78/
If you want to check out the models running:
rtsm_fvp_base-aemv8ahttp://community.validation.linaro.org/scheduler/device_type/rtsm_fvp_base-aemv8a :
http://community.validation.linaro.org/scheduler/job/1830
rtsm_fvp_base_cortex-a57x4-a53x4http://community.validation.linaro.org/scheduler/device_type/rtsm_fvp_base_cortex-a57x4-a53x4
http://community.validation.linaro.org/scheduler/job/1858
rtsm_fvp_base_cortex-a57x1-a53x1http://community.validation.linaro.org/scheduler/device_type/rtsm_fvp_base_cortex-a57x1-a53x1
http://community.validation.linaro.org/scheduler/job/1857
I'll let you know as soon as we have it available
Thanks****
Basil Eljuse…****
**
Cheers,
**
*From:* Basil Eljuse *Sent:* 30 September 2013 17:56 *To:* 'Tyler Baker' *Cc:* Alan Bennett; Linaro Validation; Dave Pigott; Dean Arnold *Subject:* RE: [Linaro-validation] LAVA upgrade for 64-bit models support...****
Hi Tyler,****
Dean confirmed that he will try on our staging area from the git source. We are still on bzr so far.****
Thanks****
Basil Eljuse…****
*From:* Tyler Baker [mailto:tyler.baker@linaro.orgtyler.baker@linaro.org]
*Sent:* 30 September 2013 16:31 *To:* Basil Eljuse *Cc:* Alan Bennett; Linaro Validation; Dave Pigott; Dean Arnold
*Subject:* Re: [Linaro-validation] LAVA upgrade for 64-bit models support...****
Hi Basil,****
Is your local LAVA server still using bzr? I ask because we have recently moved all the LAVA code to git. If you have not made the switch you will want to fetch our deployment tool from git.****
git clone http://staging.git.linaro.org/git/lava/lava-deployment-tool.git
cd lava-deployment-tool****
./lava-deployment-tool setup****
./lava-deployment-tool upgrade <instance>****
Cheers,****
On 30 September 2013 08:14, Basil Eljuse Basil.Eljuse@arm.com wrote:***
Hi Alan,****
Cool. Yes I am aware of the 2 week activity for this LAVA integration. I wanted to align ourselves in timeline with your upcoming release. Thanks a lot for the clarifications.****
Do let us know when it is good for us to pick up.****
Thanks****
Basil Eljuse…****
*From:* Alan Bennett [mailto:alan.bennett@linaro.org] *Sent:* 30 September 2013 16:08 *To:* Basil Eljuse *Cc:* Linaro Validation; Dave Pigott; Dean Arnold; Tyler Baker *Subject:* Re: [Linaro-validation] LAVA upgrade for 64-bit models support...****
Hello Basil;****
That is the correct card, You'll want to contact ITS@linaro.org/Kantaif you can't see them, From my end, as long as you are logged in, you should be able to see them. ****
The models are not yet available in production LAVA, we didn't receive them until after they were released, so we are now working to incorporate them. Kanta has us down for a few weeks on her schedule, have you seen this? The optimist in me says things will go much quicker, but we have encountered a few differences already that we are still working on. Right now we have the new models 'working', but we are working on a few regressions before we'll be ready to release this. Shouldn't be long...*
You can see the early progress here. ****
http://community.validation.linaro.org/scheduler/job/1596****
http://community.validation.linaro.org/scheduler/job/1595****
http://community.validation.linaro.org/scheduler/job/1594****
Alan****
On 29 September 2013 08:33, Basil Eljuse Basil.Eljuse@arm.com wrote:***
Hi Dave,****
I am hoping that probably you might be working on this ticket https://cards.linaro.org/browse/CARD-832 (got from Kanta, although I get permission denied when accessing the card), if not please anyone in the wider validation email group please redirect me appropriately.****
With 13.09 we do have the new Base model variants released and with the above ticket we expect to have LAVA support for these models also.****
Since we do have a local LAVA instance, I would like to figure out how we can pick the upgrades and apply to our local instance. Could anyone please advice when we could expect this upgrade to LAVA for supporting 64-bit base models, coming our way?****
I want to get Dean a heads-up in terms of his plan to get our setup upgraded. ****
Thanks****
Basil Eljuse…****
-- IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2557590 ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2548782****
linaro-validation mailing list linaro-validation@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-validation****
-- ****
Alan Bennett, Engineering Manager, Linaro LAVA Team Linaro.org http://www.linaro.org/* **│ *Open source software for ARM SoCs | Follow Linaro*: *Facebook http://www.facebook.com/pages/Linaro | Twitter http://twitter.com/#%21/linaroorg | Bloghttp://www.linaro.org/linaro-blog/ irc: akbennett | alan.bennett@linaro.org | linaro-validation@lists.linaro.org****
-- IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2557590 ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2548782****
-- ****
Tyler Baker Technical Architect, LAVA Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#%21/linaroorg - http://www.linaro.org/linaro-blog****
-- IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2557590 ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2548782
-- Tyler Baker Technical Architect, LAVA Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#%21/linaroorg - http://www.linaro.org/linaro-blog
Hi Tyler,
Thanks for the inputs.
Can you also please confirm what existing 32-bit model variants are supported in LAVA? We want to pipe-clean our setup with 32-bit variants before moving to 64-bit.
Thanks Basil Eljuse…
From: Tyler Baker [mailto:tyler.baker@linaro.org] Sent: 07 October 2013 17:36 To: Basil Eljuse Cc: Alan Bennett; Linaro Validation; Dave Pigott; Dean Arnold Subject: Re: [Linaro-validation] LAVA upgrade for 64-bit models support...
Hi Basil,
The production manifest has been updated, if you upgrade your server(s) you will pick up the new fastmodel changes.
* Make sure you have the latest linaro-image-tools installed on all servers (2013.09)
* https://github.com/EmbeddedAndroid/salt/tree/master/lava/devices/lava-worker... - These are the device configurations I am using for reference.
Let me know if you have any questions.
Cheers,
On 4 October 2013 15:25, Tyler Baker <tyler.baker@linaro.orgmailto:tyler.baker@linaro.org> wrote: Hi Basil,
On 4 October 2013 02:09, Basil Eljuse <Basil.Eljuse@arm.commailto:Basil.Eljuse@arm.com> wrote:
Hi Tyler/Alan,
Just to confirm. Dean has upgraded the deployment mode to git based repo rather than bzr repo.
Excellent news!
It seems to have gone well except for one issue where we found abd installation affected and had to reinstall adb again after the upgrade.
So once you are ready from your end we are good to pick up your changes for 64bit basemodel support.
Here is the patchset, it has been tested. Awaiting final code review:
https://staging.review.linaro.org/#/c/78/
If you want to check out the models running:
rtsm_fvp_base-aemv8ahttp://community.validation.linaro.org/scheduler/device_type/rtsm_fvp_base-aemv8a:
http://community.validation.linaro.org/scheduler/job/1830
rtsm_fvp_base_cortex-a57x4-a53x4http://community.validation.linaro.org/scheduler/device_type/rtsm_fvp_base_cortex-a57x4-a53x4
http://community.validation.linaro.org/scheduler/job/1858
rtsm_fvp_base_cortex-a57x1-a53x1http://community.validation.linaro.org/scheduler/device_type/rtsm_fvp_base_cortex-a57x1-a53x1
http://community.validation.linaro.org/scheduler/job/1857
I'll let you know as soon as we have it available
Thanks
Basil Eljuse…
Cheers,
From: Basil Eljuse Sent: 30 September 2013 17:56 To: 'Tyler Baker' Cc: Alan Bennett; Linaro Validation; Dave Pigott; Dean Arnold Subject: RE: [Linaro-validation] LAVA upgrade for 64-bit models support...
Hi Tyler,
Dean confirmed that he will try on our staging area from the git source. We are still on bzr so far.
Thanks
Basil Eljuse…
From: Tyler Baker [mailto:tyler.baker@linaro.org] Sent: 30 September 2013 16:31 To: Basil Eljuse Cc: Alan Bennett; Linaro Validation; Dave Pigott; Dean Arnold
Subject: Re: [Linaro-validation] LAVA upgrade for 64-bit models support...
Hi Basil,
Is your local LAVA server still using bzr? I ask because we have recently moved all the LAVA code to git. If you have not made the switch you will want to fetch our deployment tool from git.
git clone http://staging.git.linaro.org/git/lava/lava-deployment-tool.git
cd lava-deployment-tool
./lava-deployment-tool setup
./lava-deployment-tool upgrade <instance>
Cheers,
On 30 September 2013 08:14, Basil Eljuse <Basil.Eljuse@arm.commailto:Basil.Eljuse@arm.com> wrote:
Hi Alan,
Cool. Yes I am aware of the 2 week activity for this LAVA integration. I wanted to align ourselves in timeline with your upcoming release. Thanks a lot for the clarifications.
Do let us know when it is good for us to pick up.
Thanks
Basil Eljuse…
From: Alan Bennett [mailto:alan.bennett@linaro.orgmailto:alan.bennett@linaro.org] Sent: 30 September 2013 16:08 To: Basil Eljuse Cc: Linaro Validation; Dave Pigott; Dean Arnold; Tyler Baker Subject: Re: [Linaro-validation] LAVA upgrade for 64-bit models support...
Hello Basil;
That is the correct card, You'll want to contact ITS@linaro.org/Kantahttp://ITS@linaro.org/Kanta if you can't see them, From my end, as long as you are logged in, you should be able to see them.
The models are not yet available in production LAVA, we didn't receive them until after they were released, so we are now working to incorporate them. Kanta has us down for a few weeks on her schedule, have you seen this? The optimist in me says things will go much quicker, but we have encountered a few differences already that we are still working on. Right now we have the new models 'working', but we are working on a few regressions before we'll be ready to release this. Shouldn't be long...
You can see the early progress here.
http://community.validation.linaro.org/scheduler/job/1596
http://community.validation.linaro.org/scheduler/job/1595
http://community.validation.linaro.org/scheduler/job/1594
Alan
On 29 September 2013 08:33, Basil Eljuse <Basil.Eljuse@arm.commailto:Basil.Eljuse@arm.com> wrote:
Hi Dave,
I am hoping that probably you might be working on this ticket https://cards.linaro.org/browse/CARD-832 (got from Kanta, although I get permission denied when accessing the card), if not please anyone in the wider validation email group please redirect me appropriately.
With 13.09 we do have the new Base model variants released and with the above ticket we expect to have LAVA support for these models also.
Since we do have a local LAVA instance, I would like to figure out how we can pick the upgrades and apply to our local instance. Could anyone please advice when we could expect this upgrade to LAVA for supporting 64-bit base models, coming our way?
I want to get Dean a heads-up in terms of his plan to get our setup upgraded.
Thanks
Basil Eljuse…
-- IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2557590 ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2548782
_______________________________________________ linaro-validation mailing list linaro-validation@lists.linaro.orgmailto:linaro-validation@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-validation
--
Alan Bennett, Engineering Manager, Linaro LAVA Team Linaro.orghttp://www.linaro.org/ │ Open source software for ARM SoCs | Follow Linaro: Facebookhttp://www.facebook.com/pages/Linaro | Twitterhttp://twitter.com/#%21/linaroorg | Bloghttp://www.linaro.org/linaro-blog/ irc: akbennett | alan.bennett@linaro.orgmailto:alan.bennett@linaro.org | linaro-validation@lists.linaro.orgmailto:linaro-validation@lists.linaro.org
-- IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2557590 ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2548782
--
Tyler Baker Technical Architect, LAVA Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#%21/linaroorg - http://www.linaro.org/linaro-blog
-- IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2557590 ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2548782
-- Tyler Baker Technical Architect, LAVA Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#%21/linaroorg - http://www.linaro.org/linaro-blog
-- Tyler Baker Technical Architect, LAVA Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#%21/linaroorg - http://www.linaro.org/linaro-blog
-- IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2557590 ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2548782
Hi Basil,
On 9 October 2013 04:01, Basil Eljuse Basil.Eljuse@arm.com wrote:
Hi Tyler,****
Thanks for the inputs.****
Can you also please confirm what existing 32-bit model variants are supported in LAVA? We want to pipe-clean our setup with 32-bit variants before moving to 64-bit.
We have support for two 32 bit models:
rtsm_ve-a15x1-a7x1
rtsm_ve-a15x4-a7x4
Cheers,
Thanks****
Basil Eljuse…****
*From:* Tyler Baker [mailto:tyler.baker@linaro.org] *Sent:* 07 October 2013 17:36
*To:* Basil Eljuse *Cc:* Alan Bennett; Linaro Validation; Dave Pigott; Dean Arnold *Subject:* Re: [Linaro-validation] LAVA upgrade for 64-bit models support...****
Hi Basil,****
The production manifest has been updated, if you upgrade your server(s) you will pick up the new fastmodel changes. ****
- Make sure you have the latest linaro-image-tools installed on all
servers (2013.09)****
https://github.com/EmbeddedAndroid/salt/tree/master/lava/devices/lava-worker... These are the device configurations I am using for reference.
Let me know if you have any questions.****
Cheers,****
On 4 October 2013 15:25, Tyler Baker tyler.baker@linaro.org wrote:****
Hi Basil,****
On 4 October 2013 02:09, Basil Eljuse Basil.Eljuse@arm.com wrote:****
Hi Tyler/Alan,****
Just to confirm. Dean has upgraded the deployment mode to git based repo rather than bzr repo.****
Excellent news!****
It seems to have gone well except for one issue where we found abd installation affected and had to reinstall adb again after the upgrade.***
So once you are ready from your end we are good to pick up your changes for 64bit basemodel support.****
Here is the patchset, it has been tested. Awaiting final code review:****
https://staging.review.linaro.org/#/c/78/****
If you want to check out the models running:****
rtsm_fvp_base-aemv8ahttp://community.validation.linaro.org/scheduler/device_type/rtsm_fvp_base-aemv8a :****
http://community.validation.linaro.org/scheduler/job/1830****
rtsm_fvp_base_cortex-a57x4-a53x4http://community.validation.linaro.org/scheduler/device_type/rtsm_fvp_base_cortex-a57x4-a53x4
http://community.validation.linaro.org/scheduler/job/1858****
rtsm_fvp_base_cortex-a57x1-a53x1http://community.validation.linaro.org/scheduler/device_type/rtsm_fvp_base_cortex-a57x1-a53x1
http://community.validation.linaro.org/scheduler/job/1857****
I'll let you know as soon as we have it available****
Thanks****
Basil Eljuse…****
Cheers,****
*From:* Basil Eljuse *Sent:* 30 September 2013 17:56 *To:* 'Tyler Baker' *Cc:* Alan Bennett; Linaro Validation; Dave Pigott; Dean Arnold *Subject:* RE: [Linaro-validation] LAVA upgrade for 64-bit models support...****
Hi Tyler,****
Dean confirmed that he will try on our staging area from the git source. We are still on bzr so far.****
Thanks****
Basil Eljuse…****
*From:* Tyler Baker [mailto:tyler.baker@linaro.orgtyler.baker@linaro.org]
*Sent:* 30 September 2013 16:31 *To:* Basil Eljuse****
*Cc:* Alan Bennett; Linaro Validation; Dave Pigott; Dean Arnold****
*Subject:* Re: [Linaro-validation] LAVA upgrade for 64-bit models support...****
Hi Basil,****
Is your local LAVA server still using bzr? I ask because we have recently moved all the LAVA code to git. If you have not made the switch you will want to fetch our deployment tool from git.****
git clone http://staging.git.linaro.org/git/lava/lava-deployment-tool.git*
cd lava-deployment-tool****
./lava-deployment-tool setup****
./lava-deployment-tool upgrade <instance>****
Cheers,****
On 30 September 2013 08:14, Basil Eljuse Basil.Eljuse@arm.com wrote:****
Hi Alan,****
Cool. Yes I am aware of the 2 week activity for this LAVA integration. I wanted to align ourselves in timeline with your upcoming release. Thanks a lot for the clarifications.****
Do let us know when it is good for us to pick up.****
Thanks****
Basil Eljuse…****
*From:* Alan Bennett [mailto:alan.bennett@linaro.org] *Sent:* 30 September 2013 16:08 *To:* Basil Eljuse *Cc:* Linaro Validation; Dave Pigott; Dean Arnold; Tyler Baker *Subject:* Re: [Linaro-validation] LAVA upgrade for 64-bit models support...****
Hello Basil;****
That is the correct card, You'll want to contact ITS@linaro.org/Kantaif you can't see them, From my end, as long as you are logged in, you should be able to see them. ****
The models are not yet available in production LAVA, we didn't receive them until after they were released, so we are now working to incorporate them. Kanta has us down for a few weeks on her schedule, have you seen this? The optimist in me says things will go much quicker, but we have encountered a few differences already that we are still working on. Right now we have the new models 'working', but we are working on a few regressions before we'll be ready to release this. Shouldn't be long...** **
You can see the early progress here. ****
http://community.validation.linaro.org/scheduler/job/1596****
http://community.validation.linaro.org/scheduler/job/1595****
http://community.validation.linaro.org/scheduler/job/1594****
Alan****
On 29 September 2013 08:33, Basil Eljuse Basil.Eljuse@arm.com wrote:****
Hi Dave,****
I am hoping that probably you might be working on this ticket https://cards.linaro.org/browse/CARD-832 (got from Kanta, although I get permission denied when accessing the card), if not please anyone in the wider validation email group please redirect me appropriately.****
With 13.09 we do have the new Base model variants released and with the above ticket we expect to have LAVA support for these models also.****
Since we do have a local LAVA instance, I would like to figure out how we can pick the upgrades and apply to our local instance. Could anyone please advice when we could expect this upgrade to LAVA for supporting 64-bit base models, coming our way?****
I want to get Dean a heads-up in terms of his plan to get our setup upgraded. ** **
Thanks****
Basil Eljuse…****
-- IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2557590 ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2548782****
linaro-validation mailing list linaro-validation@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-validation****
-- ****
Alan Bennett, Engineering Manager, Linaro LAVA Team Linaro.org http://www.linaro.org/* **│ *Open source software for ARM SoCs | Follow Linaro*: *Facebook http://www.facebook.com/pages/Linaro | Twitter http://twitter.com/#%21/linaroorg | Bloghttp://www.linaro.org/linaro-blog/ irc: akbennett | alan.bennett@linaro.org | linaro-validation@lists.linaro.org****
-- IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2557590 ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2548782****
-- ****
Tyler Baker Technical Architect, LAVA Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#%21/linaroorg - http://www.linaro.org/linaro-blog****
-- IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2557590 ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2548782****
-- ****
Tyler Baker Technical Architect, LAVA Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#%21/linaroorg - http://www.linaro.org/linaro-blog****
-- ****
Tyler Baker Technical Architect, LAVA Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#%21/linaroorg - http://www.linaro.org/linaro-blog****
-- IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2557590 ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2548782
linaro-validation@lists.linaro.org
-
Alan Bennett -
Basil Eljuse -
Tyler Baker