While running kselftest recently added gpio gpio-sim.sh test case the following warning was triggered on Linux next tag 20210330 tag running on arm64 juno and hikey devices.
GOOD: next-20210326 BAD: next-20210330
This is still happening today on Linux next tag 20210407.
# selftests: gpio: gpio-sim.sh # 1. chip_name and dev_name attributes # 1.1. Chip name is communicated to user [ 143.081193] BUG: key ffff000800eba398 has not been registered! [ 143.087326] ------------[ cut here ]------------ [ 143.091987] DEBUG_LOCKS_WARN_ON(1) [ 143.092005] WARNING: CPU: 1 PID: 1821 at /usr/src/kernel/kernel/locking/lockdep.c:4688 lockdep_init_map_type+0xf0/0x298 [ 143.106223] Modules linked in: gpio_sim rfkill tda998x cec drm_kms_helper drm crct10dif_ce fuse [last unloaded: gpio_mockup] [ 143.117495] CPU: 1 PID: 1821 Comm: mv Not tainted 5.12.0-rc5-next-20210330 #1 [ 143.124645] Hardware name: ARM Juno development board (r2) (DT) [ 143.130572] pstate: 40000005 (nZcv daif -PAN -UAO -TCO BTYPE=--) [ 143.136589] pc : lockdep_init_map_type+0xf0/0x298 [ 143.141302] lr : lockdep_init_map_type+0xf0/0x298 [ 143.146014] sp : ffff800013fb3560 [ 143.149330] x29: ffff800013fb3560 x28: 00000000ffffee4b [ 143.154655] x27: 00000000000011b4 x26: 0000000000001000 [ 143.159979] x25: ffff000800eba380 x24: 0000000000000000 [ 143.165303] x23: 0000000000000000 x22: 0000000000000000 [ 143.170626] x21: ffff80001382b000 x20: ffff000800eba398 [ 143.175949] x19: ffff000827ac32a8 x18: ffffffffffffffff [ 143.181273] x17: 0000000000000000 x16: 0000000000000000 [ 143.186595] x15: ffff800012900a88 x14: ffff800093fb3167 [ 143.191918] x13: ffff800013fb3175 x12: 000000000000a0ec [ 143.197241] x11: 0000000005f5e0ff x10: ffff800013fb30c0 [ 143.202565] x9 : ffff800013fb3560 x8 : 4e5241575f534b43 [ 143.207888] x7 : ffff800012989ad8 x6 : ffff800013fb3180 [ 143.213211] x5 : 0000000000000001 x4 : 0000000000000001 [ 143.218534] x3 : ffff800012901000 x2 : 0000000000000000 [ 143.223856] x1 : b4b7acac5f71bc00 x0 : 0000000000000000 [ 143.229180] Call trace: [ 143.231625] lockdep_init_map_type+0xf0/0x298 [ 143.235989] __kernfs_create_file+0xa8/0x1d0 [ 143.240268] sysfs_add_file_mode_ns+0xa8/0x1f8 [ 143.244718] internal_create_group+0x118/0x420 [ 143.249169] sysfs_create_group+0x2c/0x38 [ 143.253185] gpio_sim_probe+0x358/0x3c0 [gpio_sim] [ 143.257995] platform_probe+0x6c/0xd8 [ 143.261663] really_probe+0x16c/0x508 [ 143.265332] driver_probe_device+0x104/0x178 [ 143.269610] __device_attach_driver+0xa4/0x130 [ 143.274062] bus_for_each_drv+0x78/0xd8 [ 143.277903] __device_attach+0xf0/0x178 [ 143.281745] device_initial_probe+0x24/0x30 [ 143.285935] bus_probe_device+0xa0/0xa8 [ 143.289776] device_add+0x424/0x810 [ 143.293270] platform_device_add+0x12c/0x2c0 [ 143.297545] platform_device_register_full+0x124/0x150 [ 143.302692] gpio_sim_config_commit_item+0x160/0x1e0 [gpio_sim] [ 143.308628] configfs_rename+0x1dc/0x220 [ 143.312557] vfs_rename+0x394/0x960 [ 143.316051] do_renameat2+0x408/0x4c0 [ 143.319718] __arm64_sys_renameat+0x5c/0x70 [ 143.323908] el0_svc_common+0x7c/0x158 [ 143.327665] do_el0_svc+0x38/0x90 [ 143.330985] el0_svc+0x20/0x30 [ 143.334045] el0_sync_handler+0x8c/0xb0 [ 143.337886] el0_sync+0x13c/0x140 [ 143.341204] irq event stamp: 5607 [ 143.344520] hardirqs last enabled at (5607): [<ffff800011462dd8>] _raw_spin_unlock_irq+0x48/0x90 [ 143.353410] hardirqs last disabled at (5606): [<ffff8000114586c4>] __schedule+0x364/0x950 [ 143.361605] softirqs last enabled at (5602): [<ffff800010010958>] __do_softirq+0x510/0x63c [ 143.369971] softirqs last disabled at (5577): [<ffff8000100a7474>] irq_exit+0x1b4/0x1c0 [ 143.377992] ---[ end trace bc3c86ef609281aa ]--- # 1.2. chip_name returns 'none' if the chip is still pending
Reported-by: Naresh Kamboju naresh.kamboju@linaro.org
metadata: git branch: master git repo: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git git describe: next-20210330 kernel-config: http://snapshots.linaro.org/openembedded/lkft/lkft/sumo/juno/lkft/linux-next...
https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20210407/tes...
Full test log link, https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20210330/tes...
git log --oneline next-20210326..next-20210330 -- tools/testing/selftests/gpio/ 9d940ab72645 selftests: gpio: add test cases for gpio-sim 8a4cb2823240 selftests: gpio: add a helper for reading GPIO line names ab1dbed6f4e8 selftests: gpio: provide a helper for reading chip info
-- Linaro LKFT https://lkft.linaro.org
On Thu, Apr 8, 2021 at 12:38 AM Naresh Kamboju naresh.kamboju@linaro.org wrote:
While running kselftest recently added gpio gpio-sim.sh test case the following warning was triggered on Linux next tag 20210330 tag running on arm64 juno and hikey devices.
GOOD: next-20210326 BAD: next-20210330
This is still happening today on Linux next tag 20210407.
Can you add the following
sysfs_attr_init(attrs[i]);
to the end of the loop in gpio_sim_setup_sysfs()?
If it fixes an issue I'll send a formal patch.
On Thu, 8 Apr 2021 at 04:21, Andy Shevchenko andy.shevchenko@gmail.com wrote:
On Thu, Apr 8, 2021 at 12:38 AM Naresh Kamboju naresh.kamboju@linaro.org wrote:
While running kselftest recently added gpio gpio-sim.sh test case the following warning was triggered on Linux next tag 20210330 tag running on arm64 juno and hikey devices.
GOOD: next-20210326 BAD: next-20210330
This is still happening today on Linux next tag 20210407.
Can you add the following
sysfs_attr_init(attrs[i]);
to the end of the loop in gpio_sim_setup_sysfs()?
Do you mean like this,
diff --git a/drivers/gpio/gpio-sim.c b/drivers/gpio/gpio-sim.c index ea17289a869c..5fe67ccf45f7 100644 --- a/drivers/gpio/gpio-sim.c +++ b/drivers/gpio/gpio-sim.c @@ -296,6 +296,7 @@ static int gpio_sim_setup_sysfs(struct gpio_sim_chip *chip) dev_attr->store = gpio_sim_sysfs_line_store;
attrs[i] = &dev_attr->attr; + sysfs_attr_init(attrs[i]); }
chip->attr_group.name = "line-ctrl";
If it fixes an issue I'll send a formal patch.
I will build and test this and report here.
- Naresh
On Thu, Apr 8, 2021 at 11:33 AM Naresh Kamboju naresh.kamboju@linaro.org wrote:
On Thu, 8 Apr 2021 at 04:21, Andy Shevchenko andy.shevchenko@gmail.com wrote:
On Thu, Apr 8, 2021 at 12:38 AM Naresh Kamboju naresh.kamboju@linaro.org wrote:
While running kselftest recently added gpio gpio-sim.sh test case the following warning was triggered on Linux next tag 20210330 tag running on arm64 juno and hikey devices.
GOOD: next-20210326 BAD: next-20210330
This is still happening today on Linux next tag 20210407.
Can you add the following
sysfs_attr_init(attrs[i]);
to the end of the loop in gpio_sim_setup_sysfs()?
Do you mean like this,
diff --git a/drivers/gpio/gpio-sim.c b/drivers/gpio/gpio-sim.c index ea17289a869c..5fe67ccf45f7 100644 --- a/drivers/gpio/gpio-sim.c +++ b/drivers/gpio/gpio-sim.c @@ -296,6 +296,7 @@ static int gpio_sim_setup_sysfs(struct gpio_sim_chip *chip) dev_attr->store = gpio_sim_sysfs_line_store;
attrs[i] = &dev_attr->attr;
sysfs_attr_init(attrs[i]); } chip->attr_group.name = "line-ctrl";
Precisely.
If it fixes an issue I'll send a formal patch.
I will build and test this and report here.
Thanks!
On Thu, 8 Apr 2021 at 15:17, Andy Shevchenko andy.shevchenko@gmail.com wrote:
On Thu, Apr 8, 2021 at 11:33 AM Naresh Kamboju naresh.kamboju@linaro.org wrote:
On Thu, 8 Apr 2021 at 04:21, Andy Shevchenko andy.shevchenko@gmail.com wrote:
On Thu, Apr 8, 2021 at 12:38 AM Naresh Kamboju naresh.kamboju@linaro.org wrote:
While running kselftest recently added gpio gpio-sim.sh test case the following warning was triggered on Linux next tag 20210330 tag running on arm64 juno and hikey devices.
GOOD: next-20210326 BAD: next-20210330
This is still happening today on Linux next tag 20210407.
Can you add the following
sysfs_attr_init(attrs[i]);
to the end of the loop in gpio_sim_setup_sysfs()?
Do you mean like this,
diff --git a/drivers/gpio/gpio-sim.c b/drivers/gpio/gpio-sim.c index ea17289a869c..5fe67ccf45f7 100644 --- a/drivers/gpio/gpio-sim.c +++ b/drivers/gpio/gpio-sim.c @@ -296,6 +296,7 @@ static int gpio_sim_setup_sysfs(struct gpio_sim_chip *chip) dev_attr->store = gpio_sim_sysfs_line_store;
attrs[i] = &dev_attr->attr;
sysfs_attr_init(attrs[i]); } chip->attr_group.name = "line-ctrl";Precisely.
As per your suggestions the above line added and build tested the reported issue is fixed now.
Reported-by: Naresh Kamboju naresh.kamboju@linaro.org Tested-by: Naresh Kamboju naresh.kamboju@linaro.org
If it fixes an issue I'll send a formal patch.
I will build and test this and report here.
OTOH, LKFT builds kernel and rootfs on host and runs tests on various target devices. While doing this process "make install" is not installing required test files like gpio-mockup-cdev and gpio-line-name.
# ./gpio-mockup.sh: line 106: ./gpio-mockup-cdev: No such file or directory # ./gpio-sim.sh: line 100: ./gpio-line-name: No such file or directory
Test run log: ------------------ # selftests: gpio: gpio-mockup.sh # 1. Module load tests # 1.1. dynamic allocation of gpio # ./gpio-mockup.sh: line 106: ./gpio-mockup-cdev: No such file or directory # test failed: line value is 127 when 1 was expected # GPIO gpio-mockup test FAIL not ok 1 selftests: gpio: gpio-mockup.sh # exit=1 # selftests: gpio: gpio-sim.sh # 1. chip_name and dev_name attributes # 1.1. Chip name is communicated to user # 1.2. chip_name returns 'none' if the chip is still pending # 1.3. Device name is communicated to user # 1.4. dev_name returns 'none' if chip is still pending # 2. Creating simulated chips # 2.1. Default number of lines is 1 # 2.2. Number of lines can be specified # 2.3. Label can be set # 2.4. Label can be left empty # 2.5. Line names can be configured # ./gpio-sim.sh: line 100: ./gpio-line-name: No such file or directory # line name is incorrect # GPIO gpio-sim test FAIL not ok 2 selftests: gpio: gpio-sim.sh # exit=1
- Naresh
On Thu, Apr 8, 2021 at 3:59 PM Naresh Kamboju naresh.kamboju@linaro.org wrote:
On Thu, 8 Apr 2021 at 15:17, Andy Shevchenko andy.shevchenko@gmail.com wrote:
On Thu, Apr 8, 2021 at 11:33 AM Naresh Kamboju naresh.kamboju@linaro.org wrote:
On Thu, 8 Apr 2021 at 04:21, Andy Shevchenko andy.shevchenko@gmail.com wrote:
On Thu, Apr 8, 2021 at 12:38 AM Naresh Kamboju naresh.kamboju@linaro.org wrote:
While running kselftest recently added gpio gpio-sim.sh test case the following warning was triggered on Linux next tag 20210330 tag running on arm64 juno and hikey devices.
GOOD: next-20210326 BAD: next-20210330
This is still happening today on Linux next tag 20210407.
Can you add the following
sysfs_attr_init(attrs[i]);
to the end of the loop in gpio_sim_setup_sysfs()?
Do you mean like this,
diff --git a/drivers/gpio/gpio-sim.c b/drivers/gpio/gpio-sim.c index ea17289a869c..5fe67ccf45f7 100644 --- a/drivers/gpio/gpio-sim.c +++ b/drivers/gpio/gpio-sim.c @@ -296,6 +296,7 @@ static int gpio_sim_setup_sysfs(struct gpio_sim_chip *chip) dev_attr->store = gpio_sim_sysfs_line_store;
attrs[i] = &dev_attr->attr;
sysfs_attr_init(attrs[i]); } chip->attr_group.name = "line-ctrl";Precisely.
As per your suggestions the above line added and build tested the reported issue is fixed now.
Reported-by: Naresh Kamboju naresh.kamboju@linaro.org Tested-by: Naresh Kamboju naresh.kamboju@linaro.org
Thanks, I'll send a formal patch.
The rest I leave for Bart to figure out what to do.
linux-kselftest-mirror@lists.linaro.org
-
Andy Shevchenko -
Naresh Kamboju