September 2023 - Linux-kselftest-mirror

[PATCH v6 1/2] posix-timers: Prefer delivery of signals to the current thread

by Marco Elver

From: Dmitry Vyukov <dvyukov(a)google.com> POSIX timers using the CLOCK_PROCESS_CPUTIME_ID clock prefer the main thread of a thread group for signal delivery. However, this has a significant downside: it requires waking up a potentially idle thread. Instead, prefer to deliver signals to the current thread (in the same thread group) if SIGEV_THREAD_ID is not set by the user. This does not change guaranteed semantics, since POSIX process CPU time timers have never guaranteed that signal delivery is to a specific thread (without SIGEV_THREAD_ID set). The effect is that we no longer wake up potentially idle threads, and the kernel is no longer biased towards delivering the timer signal to any particular thread (which better distributes the timer signals esp. when multiple timers fire concurrently). Signed-off-by: Dmitry Vyukov <dvyukov(a)google.com> Suggested-by: Oleg Nesterov <oleg(a)redhat.com> Reviewed-by: Oleg Nesterov <oleg(a)redhat.com> Signed-off-by: Marco Elver <elver(a)google.com> --- v6: - Split test from this patch. - Update wording on what this patch aims to improve. v5: - Rebased onto v6.2. v4: - Restructured checks in send_sigqueue() as suggested. v3: - Switched to the completely different implementation (much simpler) based on the Oleg's idea. RFC v2: - Added additional Cc as Thomas asked. --- kernel/signal.c | 25 ++++++++++++++++++++++--- 1 file changed, 22 insertions(+), 3 deletions(-) diff --git a/kernel/signal.c b/kernel/signal.c index 8cb28f1df294..605445fa27d4 100644 --- a/kernel/signal.c +++ b/kernel/signal.c @@ -1003,8 +1003,7 @@ static void complete_signal(int sig, struct task_struct *p, enum pid_type type) /* * Now find a thread we can wake up to take the signal off the queue. * - * If the main thread wants the signal, it gets first crack. - * Probably the least surprising to the average bear. + * Try the suggested task first (may or may not be the main thread). */ if (wants_signal(sig, p)) t = p; @@ -1970,8 +1969,23 @@ int send_sigqueue(struct sigqueue *q, struct pid *pid, enum pid_type type) ret = -1; rcu_read_lock(); + /* + * This function is used by POSIX timers to deliver a timer signal. + * Where type is PIDTYPE_PID (such as for timers with SIGEV_THREAD_ID + * set), the signal must be delivered to the specific thread (queues + * into t->pending). + * + * Where type is not PIDTYPE_PID, signals must just be delivered to the + * current process. In this case, prefer to deliver to current if it is + * in the same thread group as the target, as it avoids unnecessarily + * waking up a potentially idle task. + */ t = pid_task(pid, type); - if (!t || !likely(lock_task_sighand(t, &flags))) + if (!t) + goto ret; + if (type != PIDTYPE_PID && same_thread_group(t, current)) + t = current; + if (!likely(lock_task_sighand(t, &flags))) goto ret; ret = 1; /* the signal is ignored */ @@ -1993,6 +2007,11 @@ int send_sigqueue(struct sigqueue *q, struct pid *pid, enum pid_type type) q->info.si_overrun = 0; signalfd_notify(t, sig); + /* + * If the type is not PIDTYPE_PID, we just use shared_pending, which + * won't guarantee that the specified task will receive the signal, but + * is sufficient if t==current in the common case. + */ pending = (type != PIDTYPE_PID) ? &t->signal->shared_pending : &t->pending; list_add_tail(&q->list, &pending->list); sigaddset(&pending->signal, sig); -- 2.40.0.rc1.284.g88254d51c5-goog

1 week, 6 days

9
50
0 0

[PATCH v3] selftests/ftrace: traceonoff_triggers: strip off names

by Yipeng Zou

The func_traceonoff_triggers.tc sometimes goes to fail on my board, Kunpeng-920. [root@localhost]# ./ftracetest ./test.d/ftrace/func_traceonoff_triggers.tc -l fail.log === Ftrace unit tests === [1] ftrace - test for function traceon/off triggers [FAIL] [2] (instance) ftrace - test for function traceon/off triggers [UNSUPPORTED] I look up the log, and it shows that the md5sum is different between csum1 and csum2. ++ cnt=611 ++ sleep .1 +++ cnt_trace +++ grep -v '^#' trace +++ wc -l ++ cnt2=611 ++ '[' 611 -ne 611 ']' +++ cat tracing_on ++ on=0 ++ '[' 0 '!=' 0 ']' +++ md5sum trace ++ csum1='76896aa74362fff66a6a5f3cf8a8a500 trace' ++ sleep .1 +++ md5sum trace ++ csum2='ee8625a21c058818fc26e45c1ed3f6de trace' ++ '[' '76896aa74362fff66a6a5f3cf8a8a500 trace' '!=' 'ee8625a21c058818fc26e45c1ed3f6de trace' ']' ++ fail 'Tracing file is still changing' ++ echo Tracing file is still changing Tracing file is still changing ++ exit_fail ++ exit 1 So I directly dump the trace file before md5sum, the diff shows that: [root@localhost]# diff trace_1.log trace_2.log -y --suppress-common-lines dockerd-12285 [036] d.... 18385.510290: sched_stat | <...>-12285 [036] d.... 18385.510290: sched_stat dockerd-12285 [036] d.... 18385.510291: sched_swit | <...>-12285 [036] d.... 18385.510291: sched_swit <...>-740 [044] d.... 18385.602859: sched_stat | kworker/44:1-740 [044] d.... 18385.602859: sched_stat <...>-740 [044] d.... 18385.602860: sched_swit | kworker/44:1-740 [044] d.... 18385.602860: sched_swit And we can see that <...> filed be filled with names. We can strip off the names there to fix that. After strip off the names: kworker/u257:0-12 [019] d..2. 2528.758910: sched_stat | -12 [019] d..2. 2528.758910: sched_stat_runtime: comm=k kworker/u257:0-12 [019] d..2. 2528.758912: sched_swit | -12 [019] d..2. 2528.758912: sched_switch: prev_comm=kw <idle>-0 [000] d.s5. 2528.762318: sched_waki | -0 [000] d.s5. 2528.762318: sched_waking: comm=sshd pi <idle>-0 [037] dNh2. 2528.762326: sched_wake | -0 [037] dNh2. 2528.762326: sched_wakeup: comm=sshd pi <idle>-0 [037] d..2. 2528.762334: sched_swit | -0 [037] d..2. 2528.762334: sched_switch: prev_comm=sw Fixes: d87b29179aa0 ("selftests: ftrace: Use md5sum to take less time of checking logs") Suggested-by: Steven Rostedt (Google) <rostedt(a)goodmis.org> Signed-off-by: Yipeng Zou <zouyipeng(a)huawei.com> Acked-by: Masami Hiramatsu (Google) <mhiramat(a)kernel.org> Reviewed-by: Steven Rostedt (Google) <rostedt(a)goodmis.org> --- .../ftrace/test.d/ftrace/func_traceonoff_triggers.tc | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/func_traceonoff_triggers.tc b/tools/testing/selftests/ftrace/test.d/ftrace/func_traceonoff_triggers.tc index aee22289536b..1b57771dbfdf 100644 --- a/tools/testing/selftests/ftrace/test.d/ftrace/func_traceonoff_triggers.tc +++ b/tools/testing/selftests/ftrace/test.d/ftrace/func_traceonoff_triggers.tc @@ -90,9 +90,10 @@ if [ $on != "0" ]; then fail "Tracing is not off" fi -csum1=`md5sum trace` +# Cannot rely on names being around as they are only cached, strip them +csum1=`cat trace | sed -e 's/^ *[^ ]*$-[0-9][0-9]*$/\1/' | md5sum` sleep $SLEEP_TIME -csum2=`md5sum trace` +csum2=`cat trace | sed -e 's/^ *[^ ]*$-[0-9][0-9]*$/\1/' | md5sum` if [ "$csum1" != "$csum2" ]; then fail "Tracing file is still changing" -- 2.34.1

2 weeks

2
2
0 0

[PATCH v3 0/7] Split a folio to any lower order folios

by Zi Yan

From: Zi Yan <ziy(a)nvidia.com> Hi all, File folio supports any order and people would like to support flexible orders for anonymous folio[1] too. Currently, split_huge_page() only splits a huge page to order-0 pages, but splitting to orders higher than 0 is also useful. This patchset adds support for splitting a huge page to any lower order pages and uses it during file folio truncate operations. The patchset is on top of mm-everything-2023-03-27-21-20. Changelog === Since v2 --- 1. Fixed an issue in __split_page_owner() introduced during my rebase Since v1 --- 1. Changed split_page_memcg() and split_page_owner() parameter to use order 2. Used folio_test_pmd_mappable() in place of the equivalent code Details === * Patch 1 changes split_page_memcg() to use order instead of nr_pages * Patch 2 changes split_page_owner() to use order instead of nr_pages * Patch 3 and 4 add new_order parameter split_page_memcg() and split_page_owner() and prepare for upcoming changes. * Patch 5 adds split_huge_page_to_list_to_order() to split a huge page to any lower order. The original split_huge_page_to_list() calls split_huge_page_to_list_to_order() with new_order = 0. * Patch 6 uses split_huge_page_to_list_to_order() in large pagecache folio truncation instead of split the large folio all the way down to order-0. * Patch 7 adds a test API to debugfs and test cases in split_huge_page_test selftests. Comments and/or suggestions are welcome. [1] https://lore.kernel.org/linux-mm/Y%2FblF0GIunm+pRIC@casper.infradead.org/ Zi Yan (7): mm/memcg: use order instead of nr in split_page_memcg() mm/page_owner: use order instead of nr in split_page_owner() mm: memcg: make memcg huge page split support any order split. mm: page_owner: add support for splitting to any order in split page_owner. mm: thp: split huge page to any lower order pages. mm: truncate: split huge page cache page to a non-zero order if possible. mm: huge_memory: enable debugfs to split huge pages to any order. include/linux/huge_mm.h | 10 +- include/linux/memcontrol.h | 4 +- include/linux/page_owner.h | 10 +- mm/huge_memory.c | 137 ++++++++--- mm/memcontrol.c | 10 +- mm/page_alloc.c | 8 +- mm/page_owner.c | 8 +- mm/truncate.c | 21 +- .../selftests/mm/split_huge_page_test.c | 225 +++++++++++++++++- 9 files changed, 365 insertions(+), 68 deletions(-) -- 2.39.2

2 months, 1 week

6
22
0 0

[PATCH v10 0/4] RISC-V: mm: Make SV48 the default address space

by Charlie Jenkins

Make sv48 the default address space for mmap as some applications currently depend on this assumption. Users can now select a desired address space using a non-zero hint address to mmap. Previously, requesting the default address space from mmap by passing zero as the hint address would result in using the largest address space possible. Some applications depend on empty bits in the virtual address space, like Go and Java, so this patch provides more flexibility for application developers. -Charlie --- v10: - Move pgtable.h defintions into a no __ASSEMBLY__ region to resolve compilation conflicts (pointed out by Conor) - Will now compile with allmodconfig v9: - Raise the mmap_end default to STACK_TOP_MAX to allow the address space to grow beyond the default of sv48 on sv57 machines as suggested by Alexandre - Some of the mmap macros had unnecessary conditionals that I have removed v8: - Fix RV32 and the RV32 compat mode of RV64 (suggested by Conor) - Extract out addr and base from the mmap macros (suggested by Alexandre) v7: - Changing RLIMIT_STACK inside of an executing program does not trigger arch_pick_mmap_layout(), so rewrite tests to change RLIMIT_STACK from a script before executing tests. RLIMIT_STACK of infinity forces bottomup mmap allocation. - Make arch_get_mmap_base macro more readible by extracting out the rnd calculation. - Use MMAP_MIN_VA_BITS in TASK_UNMAPPED_BASE to support case when mmap attempts to allocate address smaller than DEFAULT_MAP_WINDOW. - Fix incorrect wording in documentation. v6: - Rebase onto the correct base v5: - Minor wording change in documentation - Change some parenthesis in arch_get_mmap_ macros - Added case for addr==0 in arch_get_mmap_ because without this, programs would crash if RLIMIT_STACK was modified before executing the program. This was tested using the libhugetlbfs tests. v4: - Split testcases/document patch into test cases, in-code documentation, and formal documentation patches - Modified the mmap_base macro to be more legible and better represent memory layout - Fixed documentation to better reflect the implmentation - Renamed DEFAULT_VA_BITS to MMAP_VA_BITS - Added additional test case for rlimit changes --- Charlie Jenkins (4): RISC-V: mm: Restrict address space for sv39,sv48,sv57 RISC-V: mm: Add tests for RISC-V mm RISC-V: mm: Update pgtable comment documentation RISC-V: mm: Document mmap changes Documentation/riscv/vm-layout.rst | 22 +++++++ arch/riscv/include/asm/elf.h | 2 +- arch/riscv/include/asm/pgtable.h | 33 ++++++++-- arch/riscv/include/asm/processor.h | 52 +++++++++++++-- tools/testing/selftests/riscv/Makefile | 2 +- tools/testing/selftests/riscv/mm/.gitignore | 2 + tools/testing/selftests/riscv/mm/Makefile | 15 +++++ .../riscv/mm/testcases/mmap_bottomup.c | 35 ++++++++++ .../riscv/mm/testcases/mmap_default.c | 35 ++++++++++ .../selftests/riscv/mm/testcases/mmap_test.h | 64 +++++++++++++++++++ .../selftests/riscv/mm/testcases/run_mmap.sh | 12 ++++ 11 files changed, 261 insertions(+), 13 deletions(-) create mode 100644 tools/testing/selftests/riscv/mm/.gitignore create mode 100644 tools/testing/selftests/riscv/mm/Makefile create mode 100644 tools/testing/selftests/riscv/mm/testcases/mmap_bottomup.c create mode 100644 tools/testing/selftests/riscv/mm/testcases/mmap_default.c create mode 100644 tools/testing/selftests/riscv/mm/testcases/mmap_test.h create mode 100755 tools/testing/selftests/riscv/mm/testcases/run_mmap.sh -- 2.34.1

3 months

3
11
0 0

[PATCH v3 00/11] A minor flurry of selftest/mm fixes

by John Hubbard

Hi, Changes since v2 [1]: * Added a new patch (sent separately earlier) at the end, to error out if "make headers" has not yet been run. * Reworked and simplified the uffd movement patch. Now it only moves some uffd*() routines, not all, and doesn't have to touch the Makefile at all. This lighter touch also allowed me to drop the "move psize(), pshift() into vm_utils.c" entirely. I expect Peter Xu will be a little happier with this new approach. * Fixed the commit description for the MADV_COLLAPSE patch. * Added more Reviewed-by tags from David Hildenbrand and Peter Xu. [1] https://lore.kernel.org/all/20230603021558.95299-1-jhubbard@nvidia.com/ John Hubbard (11): selftests/mm: fix uffd-stress unused function warning selftests/mm: fix unused variable warnings in hugetlb-madvise.c, migration.c selftests/mm: fix "warning: expression which evaluates to zero..." in mlock2-tests.c selftests/mm: fix invocation of tests that are run via shell scripts selftests/mm: .gitignore: add mkdirty, va_high_addr_switch selftests/mm: fix two -Wformat-security warnings in uffd builds selftests/mm: fix a "possibly uninitialized" warning in pkey-x86.h selftests/mm: fix build failures due to missing MADV_COLLAPSE selftests/mm: move certain uffd*() routines from vm_util.c to uffd-common.c Documentation: kselftest: "make headers" is a prerequisite selftests: error out if kernel header files are not yet built Documentation/dev-tools/kselftest.rst | 1 + tools/testing/selftests/lib.mk | 36 +++++++++++- tools/testing/selftests/mm/.gitignore | 2 + tools/testing/selftests/mm/cow.c | 7 --- tools/testing/selftests/mm/hugetlb-madvise.c | 8 ++- tools/testing/selftests/mm/khugepaged.c | 10 ---- tools/testing/selftests/mm/migration.c | 5 +- tools/testing/selftests/mm/mlock2-tests.c | 1 - tools/testing/selftests/mm/pkey-x86.h | 2 +- tools/testing/selftests/mm/run_vmtests.sh | 6 +- tools/testing/selftests/mm/uffd-common.c | 59 ++++++++++++++++++++ tools/testing/selftests/mm/uffd-common.h | 5 ++ tools/testing/selftests/mm/uffd-stress.c | 10 ---- tools/testing/selftests/mm/uffd-unit-tests.c | 16 ++---- tools/testing/selftests/mm/vm_util.c | 59 -------------------- tools/testing/selftests/mm/vm_util.h | 14 +++-- 16 files changed, 130 insertions(+), 111 deletions(-) base-commit: f8dba31b0a826e691949cd4fdfa5c30defaac8c5 -- 2.40.1

4 months, 2 weeks

6
38
0 0

[PATCH v3 0/3] Add a test to catch unprobed Devicetree devices

by Nícolas F. R. A. Prado

Regressions that cause a device to no longer be probed by a driver can have a big impact on the platform's functionality, and despite being relatively common there isn't currently any generic test to detect them. As an example, bootrr [1] does test for device probe, but it requires defining the expected probed devices for each platform. Given that the Devicetree already provides a static description of devices on the system, it is a good basis for building such a test on top. This series introduces a test to catch regressions that prevent devices from probing. Patches 1 and 2 extend the existing dt-extract-compatibles to be able to output only the compatibles that can be expected to match a Devicetree node to a driver. Patch 2 adds a kselftest that walks over the Devicetree nodes on the current platform and compares the compatibles to the ones on the list, and on an ignore list, to point out devices that failed to be probed. A compatible list is needed because not all compatibles that can show up in a Devicetree node can be used to match to a driver, for example the code for that compatible might use "OF_DECLARE" type macros and avoid the driver framework, or the node might be controlled by a driver that was bound to a different node. An ignore list is needed for the few cases where it's common for a driver to match a device but not probe, like for the "simple-mfd" compatible, where the driver only probes if that compatible is the node's first compatible. The reason for parsing the kernel source instead of relying on information exposed by the kernel at runtime (say, looking at modaliases or introducing some other mechanism), is to be able to catch issues where a config was renamed or a driver moved across configs, and the .config used by the kernel not updated accordingly. We need to parse the source to find all compatibles present in the kernel independent of the current config being run. [1] https://github.com/kernelci/bootrr Changes in v3: - Added DT selftest path to MAINTAINERS - Enabled device probe test for nodes with 'status = "ok"' - Added pass/fail/skip totals to end of test output Changes in v2: - Extended dt-extract-compatibles script to be able to extract driver matching compatibles, instead of adding a new one in Coccinelle - Made kselftest output in the KTAP format Nícolas F. R. A. Prado (3): dt: dt-extract-compatibles: Handle cfile arguments in generator function dt: dt-extract-compatibles: Add flag for driver matching compatibles kselftest: Add new test for detecting unprobed Devicetree devices MAINTAINERS | 1 + scripts/dtc/dt-extract-compatibles | 74 +++++++++++++---- tools/testing/selftests/Makefile | 1 + tools/testing/selftests/dt/.gitignore | 1 + tools/testing/selftests/dt/Makefile | 21 +++++ .../selftests/dt/compatible_ignore_list | 1 + tools/testing/selftests/dt/ktap_helpers.sh | 70 ++++++++++++++++ .../selftests/dt/test_unprobed_devices.sh | 83 +++++++++++++++++++ 8 files changed, 236 insertions(+), 16 deletions(-) create mode 100644 tools/testing/selftests/dt/.gitignore create mode 100644 tools/testing/selftests/dt/Makefile create mode 100644 tools/testing/selftests/dt/compatible_ignore_list create mode 100644 tools/testing/selftests/dt/ktap_helpers.sh create mode 100755 tools/testing/selftests/dt/test_unprobed_devices.sh -- 2.42.0

4 months, 2 weeks

6
12
0 0

[PATCH v1 0/9] x86/resctrl: Use soft RMIDs for reliable MBM on AMD

by Peter Newman

Hi Reinette, Fenghua, This series introduces a new mount option enabling an alternate mode for MBM to work around an issue on present AMD implementations and any other resctrl implementation where there are more RMIDs (or equivalent) than hardware counters. The L3 External Bandwidth Monitoring feature of the AMD PQoS extension[1] only guarantees that RMIDs currently assigned to a processor will be tracked by hardware. The counters of any other RMIDs which are no longer being tracked will be reset to zero. The MBM event counters return "Unavailable" to indicate when this has happened. An interval for effectively measuring memory bandwidth typically needs to be multiple seconds long. In Google's workloads, it is not feasible to bound the number of jobs with different RMIDs which will run in a cache domain over any period of time. Consequently, on a fully-committed system where all RMIDs are allocated, few groups' counters return non-zero values. To demonstrate the underlying issue, the first patch provides a test case in tools/testing/selftests/resctrl/test_rmids.sh. On an AMD EPYC 7B12 64-Core Processor with the default behavior: # ./test_rmids.sh Created 255 monitoring groups. g1: mbm_total_bytes: Unavailable -> Unavailable (FAIL) g2: mbm_total_bytes: Unavailable -> Unavailable (FAIL) g3: mbm_total_bytes: Unavailable -> Unavailable (FAIL) [..] g238: mbm_total_bytes: Unavailable -> Unavailable (FAIL) g239: mbm_total_bytes: Unavailable -> Unavailable (FAIL) g240: mbm_total_bytes: Unavailable -> Unavailable (FAIL) g241: mbm_total_bytes: Unavailable -> 660497472 g242: mbm_total_bytes: Unavailable -> 660793344 g243: mbm_total_bytes: Unavailable -> 660477312 g244: mbm_total_bytes: Unavailable -> 660495360 g245: mbm_total_bytes: Unavailable -> 660775360 g246: mbm_total_bytes: Unavailable -> 660645504 g247: mbm_total_bytes: Unavailable -> 660696128 g248: mbm_total_bytes: Unavailable -> 660605248 g249: mbm_total_bytes: Unavailable -> 660681280 g250: mbm_total_bytes: Unavailable -> 660834240 g251: mbm_total_bytes: Unavailable -> 660440064 g252: mbm_total_bytes: Unavailable -> 660501504 g253: mbm_total_bytes: Unavailable -> 660590720 g254: mbm_total_bytes: Unavailable -> 660548352 g255: mbm_total_bytes: Unavailable -> 660607296 255 groups, 0 returned counts in first pass, 15 in second successfully measured bandwidth from 15/255 groups To compare, here is the output from an Intel(R) Xeon(R) Platinum 8173M CPU: # ./test_rmids.sh Created 223 monitoring groups. g1: mbm_total_bytes: 0 -> 606126080 g2: mbm_total_bytes: 0 -> 613236736 g3: mbm_total_bytes: 0 -> 610254848 [..] g221: mbm_total_bytes: 0 -> 584679424 g222: mbm_total_bytes: 0 -> 588808192 g223: mbm_total_bytes: 0 -> 587317248 223 groups, 223 returned counts in first pass, 223 in second successfully measured bandwidth from 223/223 groups To make better use of the hardware in such a use case, this patchset introduces a "soft" RMID implementation, where each CPU is permanently assigned a "hard" RMID. On context switches which change the current soft RMID, the difference between each CPU's current event counts and most recent counts is added to the totals for the current or outgoing soft RMID. This technique does not work for cache occupancy counters, so this patch series disables cache occupancy events when soft RMIDs are enabled. This series adds the "mbm_soft_rmid" mount option to allow users to opt-in to the functionaltiy when they deem it helpful. When the same system from the earlier AMD example enables the mbm_soft_rmid mount option: # ./test_rmids.sh Created 255 monitoring groups. g1: mbm_total_bytes: 0 -> 686560576 g2: mbm_total_bytes: 0 -> 668204416 [..] g252: mbm_total_bytes: 0 -> 672651200 g253: mbm_total_bytes: 0 -> 666956800 g254: mbm_total_bytes: 0 -> 665917056 g255: mbm_total_bytes: 0 -> 671049600 255 groups, 255 returned counts in first pass, 255 in second successfully measured bandwidth from 255/255 groups (patches are based on tip/master) [1] https://www.amd.com/system/files/TechDocs/56375_1.03_PUB.pdf Peter Newman (8): selftests/resctrl: Verify all RMIDs count together x86/resctrl: Add resctrl_mbm_flush_cpu() to collect CPUs' MBM events x86/resctrl: Flush MBM event counts on soft RMID change x86/resctrl: Call mon_event_count() directly for soft RMIDs x86/resctrl: Create soft RMID version of __mon_event_count() x86/resctrl: Assign HW RMIDs to CPUs for soft RMID x86/resctrl: Use mbm_update() to push soft RMID counts x86/resctrl: Add mount option to enable soft RMID Stephane Eranian (1): x86/resctrl: Hold a spinlock in __rmid_read() on AMD arch/x86/include/asm/resctrl.h | 29 +++- arch/x86/kernel/cpu/resctrl/core.c | 80 ++++++++- arch/x86/kernel/cpu/resctrl/ctrlmondata.c | 9 +- arch/x86/kernel/cpu/resctrl/internal.h | 19 ++- arch/x86/kernel/cpu/resctrl/monitor.c | 158 +++++++++++++++++- arch/x86/kernel/cpu/resctrl/rdtgroup.c | 52 ++++++ tools/testing/selftests/resctrl/test_rmids.sh | 93 +++++++++++ 7 files changed, 425 insertions(+), 15 deletions(-) create mode 100755 tools/testing/selftests/resctrl/test_rmids.sh base-commit: dd806e2f030e57dd5bac973372aa252b6c175b73 -- 2.40.0.634.g4ca3ef3211-goog

4 months, 3 weeks

2
39
0 0

[PATCH v3 0/9] RISCV: Add kvm Sstc timer selftests

by Haibo Xu

The RISC-V arch_timer selftests is used to validate Sstc timer functionality in a guest, which sets up periodic timer interrupts and check the basic interrupt status upon its receipt. This KVM selftests was ported from aarch64 arch_timer and tested with Linux v6.6-rc1 on a Qemu riscv64 virt machine. --- Changed since v2: * Rebase to Linux 6.6-rc1 * Add separate patch for kvm/Makefile improvement * Move aarch64 specific macros to aarch64/arch_timer.c * Add -DCONFIG_64BIT to kvm/Makefile CFLAGS to ensure only 64bit registers were available in csr.h * Avoid some #ifdef in kvm/arch_timer.c by setting some aarch64 specific variable to 0 on risc-v Haibo Xu (9): KVM: selftests: Unify the codes for guest exception handling KVM: selftests: Unify the makefile rule for split targets KVM: arm64: selftests: Split arch_timer test code tools: riscv: Add header file csr.h KVM: riscv: selftests: Switch to use macro from csr.h KVM: riscv: selftests: Add exception handling support KVM: riscv: selftests: Add guest helper to get vcpu id KVM: riscv: selftests: Change vcpu_has_ext to a common function KVM: riscv: selftests: Add sstc timer test tools/arch/riscv/include/asm/csr.h | 521 ++++++++++++++++++ tools/testing/selftests/kvm/Makefile | 14 +- .../selftests/kvm/aarch64/arch_timer.c | 291 +--------- .../selftests/kvm/aarch64/debug-exceptions.c | 4 +- .../selftests/kvm/aarch64/page_fault_test.c | 4 +- .../testing/selftests/kvm/aarch64/vgic_irq.c | 4 +- tools/testing/selftests/kvm/arch_timer.c | 250 +++++++++ .../selftests/kvm/include/aarch64/processor.h | 12 +- .../selftests/kvm/include/kvm_util_base.h | 9 + .../selftests/kvm/include/riscv/arch_timer.h | 80 +++ .../selftests/kvm/include/riscv/processor.h | 63 ++- .../testing/selftests/kvm/include/test_util.h | 2 + .../selftests/kvm/include/timer_test.h | 43 ++ .../selftests/kvm/include/x86_64/processor.h | 5 - .../selftests/kvm/lib/aarch64/processor.c | 6 +- .../selftests/kvm/lib/riscv/handlers.S | 101 ++++ .../selftests/kvm/lib/riscv/processor.c | 86 +++ .../selftests/kvm/lib/x86_64/processor.c | 4 +- .../testing/selftests/kvm/riscv/arch_timer.c | 107 ++++ .../selftests/kvm/riscv/get-reg-list.c | 16 +- tools/testing/selftests/kvm/x86_64/amx_test.c | 4 +- .../selftests/kvm/x86_64/fix_hypercall_test.c | 4 +- .../selftests/kvm/x86_64/hyperv_evmcs.c | 4 +- .../selftests/kvm/x86_64/hyperv_features.c | 8 +- .../testing/selftests/kvm/x86_64/hyperv_ipi.c | 6 +- .../selftests/kvm/x86_64/kvm_pv_test.c | 4 +- .../selftests/kvm/x86_64/monitor_mwait_test.c | 4 +- .../kvm/x86_64/pmu_event_filter_test.c | 8 +- .../smaller_maxphyaddr_emulation_test.c | 4 +- .../selftests/kvm/x86_64/svm_int_ctl_test.c | 4 +- .../kvm/x86_64/svm_nested_shutdown_test.c | 4 +- .../kvm/x86_64/svm_nested_soft_inject_test.c | 4 +- .../kvm/x86_64/ucna_injection_test.c | 8 +- .../kvm/x86_64/userspace_msr_exit_test.c | 4 +- .../vmx_exception_with_invalid_guest_state.c | 4 +- .../selftests/kvm/x86_64/vmx_pmu_caps_test.c | 4 +- .../selftests/kvm/x86_64/xapic_ipi_test.c | 4 +- .../selftests/kvm/x86_64/xcr0_cpuid_test.c | 4 +- .../selftests/kvm/x86_64/xen_shinfo_test.c | 4 +- 39 files changed, 1338 insertions(+), 374 deletions(-) create mode 100644 tools/arch/riscv/include/asm/csr.h create mode 100644 tools/testing/selftests/kvm/arch_timer.c create mode 100644 tools/testing/selftests/kvm/include/riscv/arch_timer.h create mode 100644 tools/testing/selftests/kvm/include/timer_test.h create mode 100644 tools/testing/selftests/kvm/lib/riscv/handlers.S create mode 100644 tools/testing/selftests/kvm/riscv/arch_timer.c -- 2.34.1

4 months, 3 weeks

4
30
0 0

[PATCH] selftests: capabilities: namespace create varies for root and normal user

by Swarup Laxman Kotiaklapudi

Change namespace creation for root and non-root user differently in create_and_enter_ns() function Test result with root user: $sudo make TARGETS="capabilities" kselftest ... TAP version 13 1..1 timeout set to 45 selftests: capabilities: test_execve TAP version 13 1..12 [RUN] +++ Tests with uid == 0 +++ [NOTE] Using global UIDs for tests [RUN] Root => ep ... ok 12 Passed Totals: pass:12 fail:0 xfail:0 xpass:0 skip:0 error:0 ================================================== TAP version 13 1..9 [RUN] +++ Tests with uid != 0 +++ [NOTE] Using global UIDs for tests [RUN] Non-root => no caps ... ok 9 Passed Totals: pass:9 fail:0 xfail:0 xpass:0 skip:0 error:0 Test result without root or normal user: $make TARGETS="capabilities" kselftest ... timeout set to 45 selftests: capabilities: test_execve TAP version 13 1..12 [RUN] +++ Tests with uid == 0 +++ [NOTE] Using a user namespace for tests [RUN] Root => ep validate_cap:: Capabilities after execve were correct ok 1 Passed Check cap_ambient manipulation rules ok 2 PR_CAP_AMBIENT_RAISE failed on non-inheritable cap ok 3 PR_CAP_AMBIENT_RAISE failed on non-permitted cap ok 4 PR_CAP_AMBIENT_RAISE worked ok 5 Basic manipulation appears to work [RUN] Root +i => eip validate_cap:: Capabilities after execve were correct ok 6 Passed [RUN] UID 0 +ia => eipa validate_cap:: Capabilities after execve were correct ok 7 Passed ok 8 # SKIP SUID/SGID tests (needs privilege) Planned tests != run tests (12 != 8) Totals: pass:7 fail:0 xfail:0 xpass:0 skip:1 error:0 ================================================== TAP version 13 1..9 [RUN] +++ Tests with uid != 0 +++ [NOTE] Using a user namespace for tests [RUN] Non-root => no caps validate_cap:: Capabilities after execve were correct ok 1 Passed Check cap_ambient manipulation rules ok 2 PR_CAP_AMBIENT_RAISE failed on non-inheritable cap ok 3 PR_CAP_AMBIENT_RAISE failed on non-permitted cap ok 4 PR_CAP_AMBIENT_RAISE worked ok 5 Basic manipulation appears to work [RUN] Non-root +i => i validate_cap:: Capabilities after execve were correct ok 6 Passed [RUN] UID 1 +ia => eipa validate_cap:: Capabilities after execve were correct ok 7 Passed ok 8 # SKIP SUID/SGID tests (needs privilege) Planned tests != run tests (9 != 8) Totals: pass:7 fail:0 xfail:0 xpass:0 skip:1 error:0 Signed-off-by: Swarup Laxman Kotiaklapudi <swarupkotikalapudi(a)gmail.com> --- tools/testing/selftests/capabilities/test_execve.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/tools/testing/selftests/capabilities/test_execve.c b/tools/testing/selftests/capabilities/test_execve.c index df0ef02b4036..8236150d377e 100644 --- a/tools/testing/selftests/capabilities/test_execve.c +++ b/tools/testing/selftests/capabilities/test_execve.c @@ -96,11 +96,7 @@ static bool create_and_enter_ns(uid_t inner_uid) outer_uid = getuid(); outer_gid = getgid(); - /* - * TODO: If we're already root, we could skip creating the userns. - */ - - if (unshare(CLONE_NEWNS) == 0) { + if (outer_uid == 0 && unshare(CLONE_NEWNS) == 0) { ksft_print_msg("[NOTE]\tUsing global UIDs for tests\n"); if (prctl(PR_SET_KEEPCAPS, 1, 0, 0, 0) != 0) ksft_exit_fail_msg("PR_SET_KEEPCAPS - %s\n", -- 2.34.1

4 months, 4 weeks

3
5
0 0

[PATCH v2] selftests: prctl: Add prctl test for PR_GET_NAME

by Osama Muhammad

This patch covers the testing of PR_GET_NAME by reading it's value from proc/self/task/pid/comm and matching it with the value returned by PR_GET_NAME. If the values are matched then it's successful, otherwise it fails. changes since v1: - Handled fscanf,fopen error checking. - Defined MAX_PATH_LEN. Signed-off-by: Osama Muhammad <osmtendev(a)gmail.com> --- .../selftests/prctl/set-process-name.c | 32 +++++++++++++++++++ 1 file changed, 32 insertions(+) diff --git a/tools/testing/selftests/prctl/set-process-name.c b/tools/testing/selftests/prctl/set-process-name.c index 3bc5e0e09..562f707ba 100644 --- a/tools/testing/selftests/prctl/set-process-name.c +++ b/tools/testing/selftests/prctl/set-process-name.c @@ -12,6 +12,7 @@ #define CHANGE_NAME "changename" #define EMPTY_NAME "" #define TASK_COMM_LEN 16 +#define MAX_PATH_LEN 50 int set_name(char *name) { @@ -47,6 +48,35 @@ int check_null_pointer(char *check_name) return res; } +int check_name(void) +{ + + int pid; + + pid = getpid(); + FILE *fptr = NULL; + char path[MAX_PATH_LEN] = {}; + char name[TASK_COMM_LEN] = {}; + char output[TASK_COMM_LEN] = {}; + int j; + + j = snprintf(path, MAX_PATH_LEN, "/proc/self/task/%d/comm", pid); + fptr = fopen(path, "r"); + if (!fptr) + return -EIO; + + fscanf(fptr, "%s", output); + if (ferror(fptr)) + return -EIO; + + int res = prctl(PR_GET_NAME, name, NULL, NULL, NULL); + + if (res < 0) + return -errno; + + return !strcmp(output, name); +} + TEST(rename_process) { EXPECT_GE(set_name(CHANGE_NAME), 0); @@ -57,6 +87,8 @@ TEST(rename_process) { EXPECT_GE(set_name(CHANGE_NAME), 0); EXPECT_LT(check_null_pointer(CHANGE_NAME), 0); + + EXPECT_TRUE(check_name()); } TEST_HARNESS_MAIN -- 2.34.1

4 months, 4 weeks

2
3
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror September 2023