February 2022 - Linux-kselftest-mirror

by Li Zhijian

Hi Folks LKP/0Day found that ww_mutex.sh cannot complete since v5.16-rc1, but I'm pretty sorry that we failed to bisect the FBC, instead, the bisection pointed to a/below merge commit(91e1c99e17) finally. Due to this hang, other tests in the same group are also blocked in 0Day, we hope we can fix this hang ASAP. So if you have any idea about this, or need more debug information, feel free to let me know :) BTW, ww_mutex.sh was failed in v5.15 without hang, and looks it cannot reproduce on a vm. Our box: root@lkp-knm01 ~# lscpu Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian Address sizes: 46 bits physical, 48 bits virtual CPU(s): 288 On-line CPU(s) list: 0-287 Thread(s) per core: 4 Core(s) per socket: 72 Socket(s): 1 NUMA node(s): 2 Vendor ID: GenuineIntel CPU family: 6 Model: 133 Model name: Intel(R) Xeon Phi(TM) CPU 7295 @ 1.50GHz Stepping: 0 CPU MHz: 1385.255 CPU max MHz: 1600.0000 CPU min MHz: 1000.0000 BogoMIPS: 2992.76 Virtualization: VT-x L1d cache: 32K L1i cache: 32K L2 cache: 1024K NUMA node0 CPU(s): 0-287 NUMA node1 CPU(s): Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 fma cx16 xtpr pdcm sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch ring3mwait cpuid_fault epb pti tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms avx512f rdseed adx avx512pf avx512er avx512cd xsaveopt dtherm ida arat pln pts avx512_vpopcntdq avx512_4vnniw avx512_4fmaps Below the call stack in v5.16-rc2 [ 1000.374954][ T2713] make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-136057256686de39cc3a07c2e39ef6bc43003ff6/tools/testing/selftests/locking' [ 1000.375030][ T2713] [ 1000.428791][ T2713] 2021-11-22 22:21:27 make run_tests -C locking [ 1000.428864][ T2713] [ 1000.491043][ T2713] make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-136057256686de39cc3a07c2e39ef6bc43003ff6/tools/testing/selftests/locking' [ 1000.491121][ T2713] [ 1000.540807][ T2713] TAP version 13 [ 1000.540882][ T2713] [ 1000.576050][ T2713] 1..1 [ 1000.576282][ T2713] [ 1000.612980][ T2713] # selftests: locking: ww_mutex.sh [ 1000.613288][ T2713] [ 1495.201324][ T1577] INFO: task kworker/u576:16:1470 blocked for more than 491 seconds. [ 1495.220059][ T1577] Tainted: G B 5.16.0-rc2 #1 [ 1495.240902][ T1577] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1495.265617][ T1577] task:kworker/u576:16 state:D stack: 0 pid: 1470 ppid: 2 flags:0x00004000 [ 1495.289054][ T1577] Workqueue: test-ww_mutex test_cycle_work [test_ww_mutex] [ 1495.310936][ T1577] Call Trace: [ 1495.327809][ T1577] <TASK> [ 1495.344735][ T1577] __schedule+0xdb0/0x25c0 [ 1495.362764][ T1577] ? io_schedule_timeout+0x180/0x180 [ 1495.382013][ T1577] ? lock_downgrade+0x680/0x680 [ 1495.400894][ T1577] ? do_raw_spin_lock+0x125/0x2c0 [ 1495.418866][ T1577] schedule+0xe4/0x280 [ 1495.435597][ T1577] schedule_preempt_disabled+0x18/0x40 [ 1495.454588][ T1577] __ww_mutex_lock+0x1248/0x34c0 [ 1495.476189][ T1577] ? test_cycle_work+0x1bb/0x500 [test_ww_mutex] [ 1495.497763][ T1577] ? mutex_lock_interruptible_nested+0x40/0x40 [ 1495.518959][ T1577] ? lock_downgrade+0x680/0x680 [ 1495.536861][ T1577] ? wait_for_completion_interruptible+0x340/0x340 [ 1495.556253][ T1577] ? ww_mutex_lock+0x3e/0x380 [ 1495.574003][ T1577] ww_mutex_lock+0x3e/0x380 [ 1495.591958][ T1577] test_cycle_work+0x1bb/0x500 [test_ww_mutex] [ 1495.612260][ T1577] ? stress_reorder_work+0xa00/0xa00 [test_ww_mutex] [ 1495.632857][ T1577] ? 0xffffffff81000000 [ 1495.649027][ T1577] ? rcu_read_lock_sched_held+0x5f/0x100 [ 1495.668211][ T1577] ? rcu_read_lock_bh_held+0xc0/0xc0 [ 1495.687010][ T1577] process_one_work+0x817/0x13c0 [ 1495.704991][ T1577] ? rcu_read_unlock+0x40/0x40 [ 1495.723024][ T1577] ? pwq_dec_nr_in_flight+0x280/0x280 [ 1495.740211][ T1577] ? rwlock_bug+0xc0/0xc0 [ 1495.758038][ T1577] worker_thread+0x8b/0xd80 [ 1495.775008][ T1577] ? process_one_work+0x13c0/0x13c0 [ 1495.793017][ T1577] kthread+0x3b9/0x4c0 [ 1495.810782][ T1577] ? set_kthread_struct+0x100/0x100 [ 1495.829988][ T1577] ret_from_fork+0x22/0x30 [ 1495.845811][ T1577] </TASK> [ 1495.859087][ T1577] INFO: task kworker/u576:36:1490 blocked for more than 492 seconds. [ 1495.879048][ T1577] Tainted: G B 5.16.0-rc2 #1 [ 1495.897879][ T1577] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1495.919582][ T1577] task:kworker/u576:36 state:D stack: 0 pid: 1490 ppid: 2 flags:0x00004000 [ 1495.941865][ T1577] Workqueue: test-ww_mutex test_cycle_work [test_ww_mutex] [ 1495.959889][ T1577] Call Trace: [ 1495.974816][ T1577] <TASK> [ 1495.988759][ T1577] __schedule+0xdb0/0x25c0 [ 1495.988759][ T1577] __schedule+0xdb0/0x25c0 [ 1496.003849][ T1577] ? io_schedule_timeout+0x180/0x180 [ 1496.020839][ T1577] ? lock_downgrade+0x680/0x680 [ 1496.036854][ T1577] ? do_raw_spin_lock+0x125/0x2c0 [ 1496.051976][ T1577] schedule+0xe4/0x280 [ 1496.067780][ T1577] schedule_preempt_disabled+0x18/0x40 [ 1496.085004][ T1577] __ww_mutex_lock+0x1248/0x34c0 [ 1496.101895][ T1577] ? test_cycle_work+0x1bb/0x500 [test_ww_mutex] [ 1496.119889][ T1577] ? mutex_lock_interruptible_nested+0x40/0x40 [ 1496.137873][ T1577] ? lock_downgrade+0x680/0x680 [ 1496.152657][ T1577] ? wait_for_completion_interruptible+0x340/0x340 [ 1496.168773][ T1577] ? ww_mutex_lock+0x3e/0x380 [ 1496.184862][ T1577] ww_mutex_lock+0x3e/0x380 [ 1496.199979][ T1577] test_cycle_work+0x1bb/0x500 [test_ww_mutex] [ 1496.216277][ T1577] ? stress_reorder_work+0xa00/0xa00 [test_ww_mutex] [ 1496.234904][ T1577] ? 0xffffffff81000000 [ 1496.249856][ T1577] ? rcu_read_lock_sched_held+0x5f/0x100 [ 1496.265951][ T1577] ? rcu_read_lock_bh_held+0xc0/0xc0 [ 1496.282815][ T1577] process_one_work+0x817/0x13c0 [ 1496.299791][ T1577] ? rcu_read_unlock+0x40/0x40 [ 1496.314754][ T1577] ? pwq_dec_nr_in_flight+0x280/0x280 [ 1496.331779][ T1577] ? rwlock_bug+0xc0/0xc0 [ 1496.348007][ T1577] worker_thread+0x8b/0xd80 [ 1496.362905][ T1577] ? process_one_work+0x13c0/0x13c0 [ 1496.378975][ T1577] kthread+0x3b9/0x4c0 [ 1496.393866][ T1577] ? set_kthread_struct+0x100/0x100 [ 1496.408827][ T1577] ret_from_fork+0x22/0x30 [ 1496.423901][ T1577] </TASK> [ 1496.437994][ T1577] INFO: task kworker/u576:0:15113 blocked for more than 492 seconds. [ 1496.455862][ T1577] Tainted: G B 5.16.0-rc2 #1 [ 1496.473759][ T1577] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1496.494808][ T1577] task:kworker/u576:0 state:D stack: 0 pid:15113 ppid: 2 flags:0x00004000 [ 1496.517000][ T1577] Workqueue: test-ww_mutex test_cycle_work [test_ww_mutex] [ 1496.537035][ T1577] Call Trace: [ 1496.551187][ T1577] <TASK> [ 1496.566405][ T1577] __schedule+0xdb0/0x25c0 [ 1496.582012][ T1577] ? io_schedule_timeout+0x180/0x180 [ 1496.598049][ T1577] ? lock_downgrade+0x680/0x680 [ 1496.615360][ T1577] ? do_raw_spin_lock+0x125/0x2c0 [ 1496.631835][ T1577] schedule+0xe4/0x280 [ 1496.645972][ T1577] schedule_preempt_disabled+0x18/0x40 [ 1496.663774][ T1577] __ww_mutex_lock+0x1248/0x34c0 [ 1496.681795][ T1577] ? test_cycle_work+0x1bb/0x500 [test_ww_mutex] [ 1496.698731][ T1577] ? mutex_lock_interruptible_nested+0x40/0x40 [ 1496.714996][ T1577] ? lock_downgrade+0x680/0x680 [ 1496.730888][ T1577] ? wait_for_completion_interruptible+0x340/0x340 [ 1496.747926][ T1577] ? ww_mutex_lock+0x3e/0x380 [ 1496.762482][ T1577] ww_mutex_lock+0x3e/0x380 [ 1496.778844][ T1577] test_cycle_work+0x1bb/0x500 [test_ww_mutex] And, we found that it occasionally hangs on v5.16-rc3 (1/3 runs), below is a good dmesg. [ 962.136756][ T2950] make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-d58071a8a76d779eedab38033ae4c821c30295a5/tools/testing/selftests/locking' [ 962.136831][ T2950]- [ 962.205036][ T2950] TAP version 13 [ 962.206003][ T2950]- [ 962.298458][ T2950] 1..1 [ 962.299657][ T2950]- [ 962.345588][ T2950] # selftests: locking: ww_mutex.sh [ 962.345657][ T2950]- [ 973.641869][T25509] All ww mutex selftests passed [ 973.773996][ T2950] # locking/ww_mutex: ok [ 973.774068][ T2950]- [ 973.774236][ T2960] # locking/ww_mutex: ok [ 973.802355][ T2960]- [ 973.829966][ T2950] ok 1 selftests: locking: ww_mutex.sh [ 973.834748][ T2950]- [ 973.838302][ T2960] ok 1 selftests: locking: ww_mutex.sh [ 973.899815][ T2960]- [ 973.921431][ T2950] make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-d58071a8a76d779eedab38033ae4c821c30295a5/tools/testing/selftests/locking' [ 973.932312][ T2950]- [ 973.957345][ T2960] make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-d58071a8a76d779eedab38033ae4c821c30295a5/tools/testing/selftests/locking' Thanks Zhijian@0Day

9 months, 3 weeks

3
3
0 0

[PATCH v2] selftests/kselftest/runner/run_one(): Allow running non-executable files

by SeongJae Park

From: SeongJae Park <sjpark(a)amazon.de> When running a test program, 'run_one()' checks if the program has the execution permission and fails if it doesn't. However, it's easy to mistakenly missing the permission, as some common tools like 'diff' don't support the permission change well[1]. Compared to that, making mistakes in the test program's path would only rare, as those are explicitly listed in 'TEST_PROGS'. Therefore, it might make more sense to resolve the situation on our own and run the program. For the reason, this commit makes the test program runner function to still print the warning message but try parsing the interpreter of the program and explicitly run it with the interpreter, in the case. [1] https://lore.kernel.org/mm-commits/YRJisBs9AunccCD4@kroah.com/ Suggested-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: SeongJae Park <sjpark(a)amazon.de> --- Changes from v1 (https://lore.kernel.org/linux-kselftest/20210810140459.23990-1-sj38.park@gm…) - Parse and use the interpreter instead of changing the file tools/testing/selftests/kselftest/runner.sh | 28 +++++++++++++-------- 1 file changed, 18 insertions(+), 10 deletions(-) diff --git a/tools/testing/selftests/kselftest/runner.sh b/tools/testing/selftests/kselftest/runner.sh index cc9c846585f0..a9ba782d8ca0 100644 --- a/tools/testing/selftests/kselftest/runner.sh +++ b/tools/testing/selftests/kselftest/runner.sh @@ -33,9 +33,9 @@ tap_timeout() { # Make sure tests will time out if utility is available. if [ -x /usr/bin/timeout ] ; then - /usr/bin/timeout --foreground "$kselftest_timeout" "$1" + /usr/bin/timeout --foreground "$kselftest_timeout" $1 else - "$1" + $1 fi } @@ -65,17 +65,25 @@ run_one() TEST_HDR_MSG="selftests: $DIR: $BASENAME_TEST" echo "# $TEST_HDR_MSG" - if [ ! -x "$TEST" ]; then - echo -n "# Warning: file $TEST is " - if [ ! -e "$TEST" ]; then - echo "missing!" - else - echo "not executable, correct this." - fi + if [ ! -e "$TEST" ]; then + echo "# Warning: file $TEST is missing!" echo "not ok $test_num $TEST_HDR_MSG" else + cmd="./$BASENAME_TEST" + if [ ! -x "$TEST" ]; then + echo "# Warning: file $TEST is not executable" + + if [ $(head -n 1 "$TEST" | cut -c -2) = "#!" ] + then + interpreter=$(head -n 1 "$TEST" | cut -c 3-) + cmd="$interpreter ./$BASENAME_TEST" + else + echo "not ok $test_num $TEST_HDR_MSG" + return + fi + fi cd `dirname $TEST` > /dev/null - ((((( tap_timeout ./$BASENAME_TEST 2>&1; echo $? >&3) | + ((((( tap_timeout "$cmd" 2>&1; echo $? >&3) | tap_prefix >&4) 3>&1) | (read xs; exit $xs)) 4>>"$logfile" && echo "ok $test_num $TEST_HDR_MSG") || -- 2.17.1

1 year

3
6
0 0

[PATCH net-next v2 0/3] net: introduce rps_default_mask

by Paolo Abeni

Real-time setups try hard to ensure proper isolation between time critical applications and e.g. network processing performed by the network stack in softirq and RPS is used to move the softirq activity away from the isolated core. If the network configuration is dynamic, with netns and devices routinely created at run-time, enforcing the correct RPS setting on each newly created device allowing to transient bad configuration became complex. These series try to address the above, introducing a new sysctl knob: rps_default_mask. The new sysctl entry allows configuring a systemwide RPS mask, to be enforced since receive queue creation time without any fourther per device configuration required. Additionally, a simple self-test is introduced to check the rps_default_mask behavior. v1 -> v2: - fix sparse warning in patch 2/3 Paolo Abeni (3): net/sysctl: factor-out netdev_rx_queue_set_rps_mask() helper net/core: introduce default_rps_mask netns attribute self-tests: introduce self-tests for RPS default mask Documentation/admin-guide/sysctl/net.rst | 6 ++ include/linux/netdevice.h | 1 + net/core/net-sysfs.c | 73 +++++++++++-------- net/core/sysctl_net_core.c | 58 +++++++++++++++ tools/testing/selftests/net/Makefile | 1 + tools/testing/selftests/net/config | 3 + .../testing/selftests/net/rps_default_mask.sh | 57 +++++++++++++++ 7 files changed, 169 insertions(+), 30 deletions(-) create mode 100755 tools/testing/selftests/net/rps_default_mask.sh -- 2.26.2

1 year, 2 months

4
12
0 0

[PATCH v2 net-next 0/3] ptp: Add adjust phase to support phase offset.

by vincent.cheng.xh＠renesas.com

From: Vincent Cheng <vincent.cheng.xh(a)renesas.com> This series adds adjust phase to the PTP Hardware Clock device interface. Some PTP hardware clocks have a write phase mode that has a built-in hardware filtering capability. The write phase mode utilizes a phase offset control word instead of a frequency offset control word. Add adjust phase function to take advantage of this capability. Changes since v1: - As suggested by Richard Cochran: 1. ops->adjphase is new so need to check for non-null function pointer. 2. Kernel coding style uses lower_case_underscores. 3. Use existing PTP clock API for delayed worker. Vincent Cheng (3): ptp: Add adjphase function to support phase offset control. ptp: Add adjust_phase to ptp_clock_caps capability. ptp: ptp_clockmatrix: Add adjphase() to support PHC write phase mode. drivers/ptp/ptp_chardev.c | 1 + drivers/ptp/ptp_clock.c | 3 ++ drivers/ptp/ptp_clockmatrix.c | 92 +++++++++++++++++++++++++++++++++++ drivers/ptp/ptp_clockmatrix.h | 8 ++- include/linux/ptp_clock_kernel.h | 6 ++- include/uapi/linux/ptp_clock.h | 4 +- tools/testing/selftests/ptp/testptp.c | 6 ++- 7 files changed, 114 insertions(+), 6 deletions(-) -- 2.7.4

1 year, 8 months

5
8
0 0

[PATCH] selftests/ftrace: func_event_triggers: fix typo in user message

by Randy Dunlap

Correct typo of "it's" to "it". Signed-off-by: Randy Dunlap <rdunlap(a)infradead.org> Cc: Steven Rostedt <rostedt(a)goodmis.org> Cc: Ingo Molnar <mingo(a)redhat.com> Cc: Shuah Khan <shuah(a)kernel.org> Cc: linux-kselftest(a)vger.kernel.org --- tools/testing/selftests/ftrace/test.d/ftrace/func_event_triggers.tc | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- linux-next-20211224.orig/tools/testing/selftests/ftrace/test.d/ftrace/func_event_triggers.tc +++ linux-next-20211224/tools/testing/selftests/ftrace/test.d/ftrace/func_event_triggers.tc @@ -85,7 +85,7 @@ run_enable_disable() { echo $check_disable > $EVENT_ENABLE done sleep $SLEEP_TIME - echo " make sure it's still works" + echo " make sure it still works" test_event_enabled $check_enable_star reset_ftrace_filter

1 year, 9 months

2
2
0 0

Re: [PATCH 2/2] kvm: rename KVM_MAX_VCPU_ID to, KVM_MAX_VCPU_IDS

by Christian Zigotzky

Hello Juergen, Hello All, Since the RC1 of kernel 5.13, -smp 2 and -smp 4 don't work with a virtual e5500 QEMU KVM-HV machine anymore. [1] I see in the serial console, that the uImage doesn't load. I use the following QEMU command for booting: qemu-system-ppc64 -M ppce500 -cpu e5500 -enable-kvm -m 1024 -kernel uImage -drive format=raw,file=MintPPC32-X5000.img,index=0,if=virtio -netdev user,id=mynet0 -device virtio-net,netdev=mynet0 -append "rw root=/dev/vda" -device virtio-vga -device virtio-mouse-pci -device virtio-keyboard-pci -device pci-ohci,id=newusb -device usb-audio,bus=newusb.0 -smp 4 The kernels boot without KVM-HV. Summary for KVM-HV: -smp 1 -> works -smp 2 -> doesn't work -smp 3 -> works -smp 4 -> doesn't work I used -smp 4 before the RC1 of kernel 5.13 because my FSL P5040 BookE machine [2] has 4 cores. Does this patch solve this issue? [3] Thanks, Christian [1] https://lists.ozlabs.org/pipermail/linuxppc-dev/2021-May/229103.html [2] http://wiki.amiga.org/index.php?title=X5000 [3] https://lists.ozlabs.org/pipermail/linuxppc-dev/2021-September/234152.html

1 year, 9 months

1
1
0 0

[PATCH v12 00/40] arm64/sme: Initial support for the Scalable Matrix Extension

by Mark Brown

This series provides initial support for the ARMv9 Scalable Matrix Extension (SME). SME takes the approach used for vectors in SVE and extends this to provide architectural support for matrix operations. A more detailed overview can be found in [1]. For the kernel SME can be thought of as a series of features which are intended to be used together by applications but operate mostly orthogonally: - The ZA matrix register. - Streaming mode, in which ZA can be accessed and a subset of SVE features are available. - A second vector length, used for streaming mode SVE and ZA and controlled using a similar interface to that for SVE. - TPIDR2, a new userspace controllable system register intended for use by the C library for storing context related to the ZA ABI. A substantial part of the series is dedicated to refactoring the existing SVE support so that we don't need to duplicate code for handling vector lengths and the SVE registers, this involves creating an array of vector types and making the users take the vector type as a parameter. I'm not 100% happy with this but wasn't able to come up with anything better, duplicating code definitely felt like a bad idea so this felt like the least bad thing. If this approach makes sense to people it might make sense to split this off into a separate series and/or merge it while the rest is pending review to try to make things a little more digestable, the series is very large so it'd probably make things easier to digest if some of the preparatory refactoring could be merged before the rest is ready. One feature of the architecture of particular note is that switching to and from streaming mode may change the size of and invalidate the contents of the SVE registers, and when in streaming mode the FFR is not accessible. This complicates aspects of the ABI like signal handling and ptrace. This initial implementation is mainly intended to get the ABI in place, there are several areas which will be worked on going forwards - some of these will be blockers, others could be handled in followup serieses: - SME is currently not supported for KVM guests, this will be done as a followup series. A host system can use SME and run KVM guests but SME is not available in the guests. - The KVM host support is done in a very simplistic way, were anyone to attempt to use it in production there would be performance impacts on hosts with SME support. As part of this we also add enumeration of fine grained traps. - There is not currently ptrace or signal support TPIDR2, this will be done as a followup series. - No support is currently provided for scheduler control of SME or SME applications, given the size of the SME register state the context switch overhead may be noticable so this may be needed especially for real time applications. Similar concerns already exist for larger SVE vector lengths but are amplified for SME, particularly as the vector length increases. - There has been no work on optimising the performance of anything the kernel does. It is not expected that any systems will be encountered that support SME but not SVE, SME is an ARMv9 feature and SVE is mandatory for ARMv9. The code attempts to handle any such systems that are encountered but this hasn't been tested extensively. v12: - Fix some typos in the ABI document. - Print a message when we skip a vector length in the signal tests. - Add note of earliest toolchain versions with SME to manual encodings for future reference now that's landed. - Drop reference to PCS in sme.rst, it's not referenced and one of the links was broken. - Encode smstop and smstart as sysregs in the kernel. - Don't redundantly flush the SVE register state when loading FPSIMD state with SME enabled for the task, the architecture will do this for us. - Introduce and use task_get_cur_vl() to get the vector length for the currently active SVE registers. - Fix support for !FA64 mode in signal and syscall tests. - Simplify instruction sequence for ssve_regs signal test. - Actually include the ZA signal test in the patch set. v11: - Rebase onto v5.17-rc3. - Provide a sme-inst.h to collect manual encodings in kselftest. v10: - Actually do the rebase of fixups from the previous version into relevant patches. v9: - Remove defensive programming around IS_ENABLED() and FGT in KVM code. - Fix naming of TPIDR2 FGT register bit. - Add patches making handling of floating point register bits more consistent (also sent as separate series). - Drop now unused enumeration of fine grained traps. v8: - Rebase onto v5.17-rc1. - Support interoperation with KVM, SME is disabled for KVM guests with minimal handling for cleaning up SME state when entering and leaving the guest. - Document and implement that signal handlers are invoked with ZA and streaming mode disabled. - Use the RDSVL instruction introduced in EAC2 of the architecture to obtain the streaming mode vector length during enumeration, ZA state loading/saving and in test programs. - Store a pointer to SVCR in fpsimd_last_state and use it in fpsimd_save() for interoperation with KVM. - Add a test case sme_trap_no_sm checking that we generate a SIGILL when using an instruction that requires streaming mode without enabling it. - Add basic ZA context form validation to testcases helper library. - Move signal tests over to validating streaming VL from ZA information. - Pulled in patch removing ARRAY_SIZE() so that kselftest builds cleanly and to avoid trivial conflicts. v7: - Rebase onto v5.16-rc3. - Reduce indentation when supporting custom triggers for signal tests as suggested by Catalin. - Change to specifying a width for all CPU features rather than adding single bit specific infrastructure. - Don't require zeroing of non-shared SVE state during syscalls. v6: - Rebase onto v5.16-rc1. - Return to disabling TIF_SVE on kernel entry even if we have SME state, this avoids the need for KVM to handle the case where TIF_SVE is set on guest entry. - Add syscall-abi.h to SME updates to syscall-abi, mistakenly omitted from commit. v5: - Rebase onto currently merged SVE and kselftest patches. - Add support for the FA64 option, introduced in the recently published EAC1 update to the specification. - Pull in test program for the syscall ABI previously sent separately with some revisions and add coverage for the SME ABI. - Fix checking for options with 1 bit fields in ID_AA64SMFR0_EL1. - Minor fixes and clarifications to the ABI documentation. v4: - Rebase onto merged patches. - Remove an uneeded NULL check in vec_proc_do_default_vl(). - Include patch to factor out utility routines in kselftests written in assembler. - Specify -ffreestanding when building TPIDR2 test. v3: - Skip FFR rather than predicate registers in sve_flush_live(). - Don't assume a bool is all zeros in sve_flush_live() as per AAPCS. - Don't redundantly specify a zero index when clearing FFR. v2: - Fix several issues with !SME and !SVE configurations. - Preserve TPIDR2 when creating a new thread/process unless CLONE_SETTLS is set. - Report traps due to using features in an invalid mode as SIGILL. - Spell out streaming mode behaviour in SVE ABI documentation more directly. - Document TPIDR2 in the ABI document. - Use SMSTART and SMSTOP rather than read/modify/write sequences. - Rework logic for exiting streaming mode on syscall. - Don't needlessly initialise SVCR on access trap. - Always restore SME VL for userspace if SME traps are disabled. - Only yield to encourage preemption every 128 iterations in za-test, otherwise do a getpid(), and validate SVCR after syscall. - Leave streaming mode disabled except when reading the vector length in za-test, and disable ZA after detecting a mismatch. - Add SME support to vlset. - Clarifications and typo fixes in comments. - Move sme_alloc() forward declaration back a patch. [1] https://community.arm.com/developer/ip-products/processors/b/processors-ip-… Mark Brown (40): arm64: Define CPACR_EL1_FPEN similarly to other floating point controls arm64: Always use individual bits in CPACR floating point enables arm64: cpufeature: Always specify and use a field width for capabilities kselftest/arm64: Remove local ARRAY_SIZE() definitions kselftest/arm64: signal: Allow tests to be incompatible with features arm64/sme: Provide ABI documentation for SME arm64/sme: System register and exception syndrome definitions arm64/sme: Manually encode SME instructions arm64/sme: Early CPU setup for SME arm64/sme: Basic enumeration support arm64/sme: Identify supported SME vector lengths at boot arm64/sme: Implement sysctl to set the default vector length arm64/sme: Implement vector length configuration prctl()s arm64/sme: Implement support for TPIDR2 arm64/sme: Implement SVCR context switching arm64/sme: Implement streaming SVE context switching arm64/sme: Implement ZA context switching arm64/sme: Implement traps and syscall handling for SME arm64/sme: Disable ZA and streaming mode when handling signals arm64/sme: Implement streaming SVE signal handling arm64/sme: Implement ZA signal handling arm64/sme: Implement ptrace support for streaming mode SVE registers arm64/sme: Add ptrace support for ZA arm64/sme: Disable streaming mode and ZA when flushing CPU state arm64/sme: Save and restore streaming mode over EFI runtime calls KVM: arm64: Hide SME system registers from guests KVM: arm64: Trap SME usage in guest KVM: arm64: Handle SME host state when running guests arm64/sme: Provide Kconfig for SME kselftest/arm64: Add manual encodings for SME instructions kselftest/arm64: sme: Add SME support to vlset kselftest/arm64: Add tests for TPIDR2 kselftest/arm64: Extend vector configuration API tests to cover SME kselftest/arm64: sme: Provide streaming mode SVE stress test kselftest/arm64: signal: Handle ZA signal context in core code kselftest/arm64: Add stress test for SME ZA context switching kselftest/arm64: signal: Add SME signal handling tests kselftest/arm64: Add streaming SVE to SVE ptrace tests kselftest/arm64: Add coverage for the ZA ptrace interface kselftest/arm64: Add SME support to syscall ABI test Documentation/arm64/elf_hwcaps.rst | 33 + Documentation/arm64/index.rst | 1 + Documentation/arm64/sme.rst | 427 +++++++++++++ Documentation/arm64/sve.rst | 70 ++- arch/arm64/Kconfig | 11 + arch/arm64/include/asm/cpu.h | 4 + arch/arm64/include/asm/cpufeature.h | 25 + arch/arm64/include/asm/el2_setup.h | 64 +- arch/arm64/include/asm/esr.h | 13 +- arch/arm64/include/asm/exception.h | 1 + arch/arm64/include/asm/fpsimd.h | 110 +++- arch/arm64/include/asm/fpsimdmacros.h | 87 +++ arch/arm64/include/asm/hwcap.h | 8 + arch/arm64/include/asm/kvm_arm.h | 5 +- arch/arm64/include/asm/kvm_host.h | 4 + arch/arm64/include/asm/processor.h | 26 +- arch/arm64/include/asm/sysreg.h | 71 ++- arch/arm64/include/asm/thread_info.h | 2 + arch/arm64/include/uapi/asm/hwcap.h | 8 + arch/arm64/include/uapi/asm/ptrace.h | 69 ++- arch/arm64/include/uapi/asm/sigcontext.h | 55 +- arch/arm64/kernel/cpufeature.c | 273 +++++++-- arch/arm64/kernel/cpuinfo.c | 13 + arch/arm64/kernel/entry-common.c | 11 + arch/arm64/kernel/entry-fpsimd.S | 36 ++ arch/arm64/kernel/fpsimd.c | 565 ++++++++++++++++-- arch/arm64/kernel/process.c | 28 +- arch/arm64/kernel/ptrace.c | 356 +++++++++-- arch/arm64/kernel/signal.c | 188 +++++- arch/arm64/kernel/syscall.c | 29 +- arch/arm64/kernel/traps.c | 1 + arch/arm64/kvm/fpsimd.c | 43 +- arch/arm64/kvm/hyp/include/hyp/switch.h | 4 +- arch/arm64/kvm/hyp/nvhe/switch.c | 30 + arch/arm64/kvm/hyp/vhe/switch.c | 15 +- arch/arm64/kvm/sys_regs.c | 9 +- arch/arm64/tools/cpucaps | 2 + include/uapi/linux/elf.h | 2 + include/uapi/linux/prctl.h | 9 + kernel/sys.c | 12 + tools/testing/selftests/arm64/abi/.gitignore | 1 + tools/testing/selftests/arm64/abi/Makefile | 9 +- .../selftests/arm64/abi/syscall-abi-asm.S | 79 ++- .../testing/selftests/arm64/abi/syscall-abi.c | 205 ++++++- .../testing/selftests/arm64/abi/syscall-abi.h | 15 + tools/testing/selftests/arm64/abi/tpidr2.c | 298 +++++++++ tools/testing/selftests/arm64/fp/.gitignore | 4 + tools/testing/selftests/arm64/fp/Makefile | 12 +- tools/testing/selftests/arm64/fp/rdvl-sme.c | 14 + tools/testing/selftests/arm64/fp/rdvl.S | 10 + tools/testing/selftests/arm64/fp/rdvl.h | 1 + tools/testing/selftests/arm64/fp/sme-inst.h | 51 ++ tools/testing/selftests/arm64/fp/ssve-stress | 59 ++ tools/testing/selftests/arm64/fp/sve-ptrace.c | 13 +- tools/testing/selftests/arm64/fp/sve-test.S | 20 + tools/testing/selftests/arm64/fp/vec-syscfg.c | 10 + tools/testing/selftests/arm64/fp/vlset.c | 10 +- tools/testing/selftests/arm64/fp/za-ptrace.c | 354 +++++++++++ tools/testing/selftests/arm64/fp/za-stress | 59 ++ tools/testing/selftests/arm64/fp/za-test.S | 388 ++++++++++++ .../testing/selftests/arm64/signal/.gitignore | 3 + .../selftests/arm64/signal/test_signals.h | 5 + .../arm64/signal/test_signals_utils.c | 40 +- .../arm64/signal/test_signals_utils.h | 2 + .../testcases/fake_sigreturn_sme_change_vl.c | 92 +++ .../arm64/signal/testcases/sme_trap_no_sm.c | 38 ++ .../signal/testcases/sme_trap_non_streaming.c | 45 ++ .../arm64/signal/testcases/sme_trap_za.c | 36 ++ .../selftests/arm64/signal/testcases/sme_vl.c | 68 +++ .../arm64/signal/testcases/ssve_regs.c | 133 +++++ .../arm64/signal/testcases/testcases.c | 36 ++ .../arm64/signal/testcases/testcases.h | 3 +- .../arm64/signal/testcases/za_regs.c | 128 ++++ 73 files changed, 4711 insertions(+), 250 deletions(-) create mode 100644 Documentation/arm64/sme.rst create mode 100644 tools/testing/selftests/arm64/abi/syscall-abi.h create mode 100644 tools/testing/selftests/arm64/abi/tpidr2.c create mode 100644 tools/testing/selftests/arm64/fp/rdvl-sme.c create mode 100644 tools/testing/selftests/arm64/fp/sme-inst.h create mode 100644 tools/testing/selftests/arm64/fp/ssve-stress create mode 100644 tools/testing/selftests/arm64/fp/za-ptrace.c create mode 100644 tools/testing/selftests/arm64/fp/za-stress create mode 100644 tools/testing/selftests/arm64/fp/za-test.S create mode 100644 tools/testing/selftests/arm64/signal/testcases/fake_sigreturn_sme_change_vl.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/sme_trap_no_sm.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/sme_trap_non_streaming.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/sme_trap_za.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/sme_vl.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/ssve_regs.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/za_regs.c base-commit: dfd42facf1e4ada021b939b4e19c935dcdd55566 -- 2.30.2

1 year, 10 months

5
56
0 0

[PATCH v9 0/6] test_sysfs: add new selftest for sysfs

by Luis Chamberlain

On this v9 I've dropped the generic sysfs deadlock fix given Ming Lei has provided alternative fixes for the zram driver without incurring a generic lock *and* we don't yet have full assessment of how wide spread the deadlock case might be in the kernel. A full assessment effort is still underway using Coccinelle with iteration support, however that effort will take a bit more time to complete. We can re-evaluate the value of a generic fix later after the assessment is complete. This series now just adds the test_sysfs selftest and failure injection support for it on kernfs. The most valuable tests are those which confirm that once a kernfs active reference is obtained with kernfs_get_active() the pointers used there are still valid, and so using sysfs ops *are* safe if we race against module removal. Likewise it also confirms how module removal will *wait* for these ops to complete if a kernfs node is already active. This v9 series also addresses feedback mostly provided by Kees Cook and Greg. I also made a few changes to the test_sysfs driver to account for changes in the block layer. I also improved the kernfs failure injection tests with documentation of how they work and to account for the real expected return value of a write before the kernfs active reference is obtained. Upstream commit 8e141f9eb803e ("block: drain file system I/O on del_gendisk") has revealed that small minor induced delays on del_gendisk() can make a few writes succeed if the delays used are small. So we clarify the logic of why writes could either fail or succeed before the kernfs active reference is taken. These changes also availble on this tree: https://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux-next.git/log/?… v9: * rebased onto linux-next tag next-20211029 * add Reviewed-by tags for the SPDX change, and the drivers which get the tag for it * drop the generic sysfs deadlock fix for now as the scope of how wide spread the issue is still needs to be assessed * drop the zram patches as they are replaced by Ming Lei's fixes * drop already merged patches * try_module_get() docs: enhanced using feedback from Kees Cook. I extended the documention to make it clear that if proper care is not taken the use of this routine could crash the kernel. * kernfs: move failure injection knobs under /sys/kernel/debug/fail_kernfs as suggested by Kees Cook * kernfs: rename failure injection file to fault_inject.c as suggested by Kees Cook * kernfs: split up documentation of failure injection knobs as suggested by Kees Cook * kernfs: move the wait into debug call, and use a simple one liner may_wait() calls to make the changes much less intrusive and more readable as suggested by Kees Cook * kernfs: drop __func__ uses as suggested by Kees Cook * test_sysfs: use sizeof() instead of open coded 16 as suggested by Kees Cook * test_sysfs: use sysfs_emit as suggested by Kees Cook * test_sysfs: drop boiler place license as suggested by Greg KH * test_sysfs: use depends instead of select as suggested by Kees Cook * test_sysfs: drop #ifdefery as suggested by Kees Cook * test_sysfs: clarified that the use of a lock on rmmod which causes a deadlock is something drivers should avoid, and its why we leave the test disabled. * test_sysfs: now that device_add_disk() returns an error, use the new error return code, otherwise this is going to prevent us from eventually embracing __must_check() on that call on the block layer. * test_syfs: testdev_submit_bio() needed to change data types as now it returns void. * test_sysfs: enhance kernfs failure injection tests with documenation and correct the expected return value for writes Luis Chamberlain (6): LICENSES: Add the copyleft-next-0.3.1 license testing: use the copyleft-next-0.3.1 SPDX tag selftests: add tests_sysfs module kernfs: add initial failure injection support test_sysfs: add support to use kernfs failure injection kernel/module: add documentation for try_module_get() .../fault-injection/fault-injection.rst | 50 + LICENSES/dual/copyleft-next-0.3.1 | 237 +++ MAINTAINERS | 9 +- fs/kernfs/Makefile | 1 + fs/kernfs/fault_inject.c | 93 ++ fs/kernfs/file.c | 9 + fs/kernfs/kernfs-internal.h | 70 + include/linux/kernfs.h | 5 + include/linux/module.h | 37 +- lib/Kconfig.debug | 23 + lib/Makefile | 1 + lib/test_kmod.c | 12 +- lib/test_sysctl.c | 12 +- lib/test_sysfs.c | 913 +++++++++++ tools/testing/selftests/kmod/kmod.sh | 13 +- tools/testing/selftests/sysctl/sysctl.sh | 12 +- tools/testing/selftests/sysfs/Makefile | 12 + tools/testing/selftests/sysfs/config | 5 + tools/testing/selftests/sysfs/settings | 1 + tools/testing/selftests/sysfs/sysfs.sh | 1411 +++++++++++++++++ 20 files changed, 2878 insertions(+), 48 deletions(-) create mode 100644 LICENSES/dual/copyleft-next-0.3.1 create mode 100644 fs/kernfs/fault_inject.c create mode 100644 lib/test_sysfs.c create mode 100644 tools/testing/selftests/sysfs/Makefile create mode 100644 tools/testing/selftests/sysfs/config create mode 100644 tools/testing/selftests/sysfs/settings create mode 100755 tools/testing/selftests/sysfs/sysfs.sh -- 2.30.2

1 year, 10 months

9
35
0 0

[PATCH 1/2] selftests/lkdtm: add config and turn off CFI_FORWARD_PROTO

by Muhammad Usama Anjum

Add config options which are needed for LKDTM sub-tests. STACKLEAK_ERASING test needs GCC_PLUGIN_STACKLEAK config. READ_AFTER_FREE and READ_BUDDY_AFTER_FREE tests need INIT_ON_FREE_DEFAULT_ON config. CFI_FORWARD_PROTO always fails as there is no active CFI system of some kind. Turn it off for now by default until proper support. Cc: Kees Cook <keescook(a)chromium.org> Cc: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Fixes: 46d1a0f03d66 ("selftests/lkdtm: Add tests for LKDTM targets") Signed-off-by: Muhammad Usama Anjum <usama.anjum(a)collabora.com> --- tools/testing/selftests/lkdtm/config | 2 ++ tools/testing/selftests/lkdtm/tests.txt | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/lkdtm/config b/tools/testing/selftests/lkdtm/config index 46f39ee762086..adc9fa60057c5 100644 --- a/tools/testing/selftests/lkdtm/config +++ b/tools/testing/selftests/lkdtm/config @@ -2,8 +2,10 @@ CONFIG_LKDTM=y CONFIG_DEBUG_LIST=y CONFIG_SLAB_FREELIST_HARDENED=y CONFIG_FORTIFY_SOURCE=y +CONFIG_GCC_PLUGIN_STACKLEAK=y CONFIG_HARDENED_USERCOPY=y CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT=y +CONFIG_INIT_ON_FREE_DEFAULT_ON=y CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y CONFIG_UBSAN=y CONFIG_UBSAN_BOUNDS=y diff --git a/tools/testing/selftests/lkdtm/tests.txt b/tools/testing/selftests/lkdtm/tests.txt index 6b36b7f5dcf96..aa947b0ce1eeb 100644 --- a/tools/testing/selftests/lkdtm/tests.txt +++ b/tools/testing/selftests/lkdtm/tests.txt @@ -72,7 +72,7 @@ USERCOPY_STACK_FRAME_FROM USERCOPY_STACK_BEYOND USERCOPY_KERNEL STACKLEAK_ERASING OK: the rest of the thread stack is properly erased -CFI_FORWARD_PROTO +#CFI_FORWARD_PROTO FORTIFIED_STRSCPY FORTIFIED_OBJECT FORTIFIED_SUBOBJECT -- 2.30.2

2 years

2
14
0 0

[PATCH] Makefile: Fix separate output directory build of kselftests

by Muhammad Usama Anjum

Build of kselftests fail if kernel's top most Makefile is used for running or building kselftests with separate output directory. The absolute path is needed to reference other files during this kind of build. Set KBUILD_ABS_SRCTREE to use absolute path during the build. It fixes the following different types of errors: make kselftest-all O=/linux_mainline/build Makefile:1080: ../scripts/Makefile.extrawarn: No such file or directory make kselftest-all O=build Makefile:1080: ../scripts/Makefile.extrawarn: No such file or directory Signed-off-by: Muhammad Usama Anjum <usama.anjum(a)collabora.com> --- I've tested this patch on top of next-20220217. The latest next-20220222 have missing patches. --- Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Makefile b/Makefile index 86f633c2809ea..62b3eb8a102ab 100644 --- a/Makefile +++ b/Makefile @@ -1411,10 +1411,10 @@ tools/%: FORCE PHONY += kselftest kselftest: - $(Q)$(MAKE) -C $(srctree)/tools/testing/selftests run_tests + $(Q)$(MAKE) -C $(srctree)/tools/testing/selftests KBUILD_ABS_SRCTREE=1 run_tests kselftest-%: FORCE - $(Q)$(MAKE) -C $(srctree)/tools/testing/selftests $* + $(Q)$(MAKE) -C $(srctree)/tools/testing/selftests KBUILD_ABS_SRCTREE=1 $* PHONY += kselftest-merge kselftest-merge: -- 2.30.2

2 years

3
9
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror February 2022