June 2022 - Linux-kselftest-mirror

by Li Zhijian

Hi Folks LKP/0Day found that ww_mutex.sh cannot complete since v5.16-rc1, but I'm pretty sorry that we failed to bisect the FBC, instead, the bisection pointed to a/below merge commit(91e1c99e17) finally. Due to this hang, other tests in the same group are also blocked in 0Day, we hope we can fix this hang ASAP. So if you have any idea about this, or need more debug information, feel free to let me know :) BTW, ww_mutex.sh was failed in v5.15 without hang, and looks it cannot reproduce on a vm. Our box: root@lkp-knm01 ~# lscpu Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian Address sizes: 46 bits physical, 48 bits virtual CPU(s): 288 On-line CPU(s) list: 0-287 Thread(s) per core: 4 Core(s) per socket: 72 Socket(s): 1 NUMA node(s): 2 Vendor ID: GenuineIntel CPU family: 6 Model: 133 Model name: Intel(R) Xeon Phi(TM) CPU 7295 @ 1.50GHz Stepping: 0 CPU MHz: 1385.255 CPU max MHz: 1600.0000 CPU min MHz: 1000.0000 BogoMIPS: 2992.76 Virtualization: VT-x L1d cache: 32K L1i cache: 32K L2 cache: 1024K NUMA node0 CPU(s): 0-287 NUMA node1 CPU(s): Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 fma cx16 xtpr pdcm sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch ring3mwait cpuid_fault epb pti tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms avx512f rdseed adx avx512pf avx512er avx512cd xsaveopt dtherm ida arat pln pts avx512_vpopcntdq avx512_4vnniw avx512_4fmaps Below the call stack in v5.16-rc2 [ 1000.374954][ T2713] make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-136057256686de39cc3a07c2e39ef6bc43003ff6/tools/testing/selftests/locking' [ 1000.375030][ T2713] [ 1000.428791][ T2713] 2021-11-22 22:21:27 make run_tests -C locking [ 1000.428864][ T2713] [ 1000.491043][ T2713] make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-136057256686de39cc3a07c2e39ef6bc43003ff6/tools/testing/selftests/locking' [ 1000.491121][ T2713] [ 1000.540807][ T2713] TAP version 13 [ 1000.540882][ T2713] [ 1000.576050][ T2713] 1..1 [ 1000.576282][ T2713] [ 1000.612980][ T2713] # selftests: locking: ww_mutex.sh [ 1000.613288][ T2713] [ 1495.201324][ T1577] INFO: task kworker/u576:16:1470 blocked for more than 491 seconds. [ 1495.220059][ T1577] Tainted: G B 5.16.0-rc2 #1 [ 1495.240902][ T1577] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1495.265617][ T1577] task:kworker/u576:16 state:D stack: 0 pid: 1470 ppid: 2 flags:0x00004000 [ 1495.289054][ T1577] Workqueue: test-ww_mutex test_cycle_work [test_ww_mutex] [ 1495.310936][ T1577] Call Trace: [ 1495.327809][ T1577] <TASK> [ 1495.344735][ T1577] __schedule+0xdb0/0x25c0 [ 1495.362764][ T1577] ? io_schedule_timeout+0x180/0x180 [ 1495.382013][ T1577] ? lock_downgrade+0x680/0x680 [ 1495.400894][ T1577] ? do_raw_spin_lock+0x125/0x2c0 [ 1495.418866][ T1577] schedule+0xe4/0x280 [ 1495.435597][ T1577] schedule_preempt_disabled+0x18/0x40 [ 1495.454588][ T1577] __ww_mutex_lock+0x1248/0x34c0 [ 1495.476189][ T1577] ? test_cycle_work+0x1bb/0x500 [test_ww_mutex] [ 1495.497763][ T1577] ? mutex_lock_interruptible_nested+0x40/0x40 [ 1495.518959][ T1577] ? lock_downgrade+0x680/0x680 [ 1495.536861][ T1577] ? wait_for_completion_interruptible+0x340/0x340 [ 1495.556253][ T1577] ? ww_mutex_lock+0x3e/0x380 [ 1495.574003][ T1577] ww_mutex_lock+0x3e/0x380 [ 1495.591958][ T1577] test_cycle_work+0x1bb/0x500 [test_ww_mutex] [ 1495.612260][ T1577] ? stress_reorder_work+0xa00/0xa00 [test_ww_mutex] [ 1495.632857][ T1577] ? 0xffffffff81000000 [ 1495.649027][ T1577] ? rcu_read_lock_sched_held+0x5f/0x100 [ 1495.668211][ T1577] ? rcu_read_lock_bh_held+0xc0/0xc0 [ 1495.687010][ T1577] process_one_work+0x817/0x13c0 [ 1495.704991][ T1577] ? rcu_read_unlock+0x40/0x40 [ 1495.723024][ T1577] ? pwq_dec_nr_in_flight+0x280/0x280 [ 1495.740211][ T1577] ? rwlock_bug+0xc0/0xc0 [ 1495.758038][ T1577] worker_thread+0x8b/0xd80 [ 1495.775008][ T1577] ? process_one_work+0x13c0/0x13c0 [ 1495.793017][ T1577] kthread+0x3b9/0x4c0 [ 1495.810782][ T1577] ? set_kthread_struct+0x100/0x100 [ 1495.829988][ T1577] ret_from_fork+0x22/0x30 [ 1495.845811][ T1577] </TASK> [ 1495.859087][ T1577] INFO: task kworker/u576:36:1490 blocked for more than 492 seconds. [ 1495.879048][ T1577] Tainted: G B 5.16.0-rc2 #1 [ 1495.897879][ T1577] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1495.919582][ T1577] task:kworker/u576:36 state:D stack: 0 pid: 1490 ppid: 2 flags:0x00004000 [ 1495.941865][ T1577] Workqueue: test-ww_mutex test_cycle_work [test_ww_mutex] [ 1495.959889][ T1577] Call Trace: [ 1495.974816][ T1577] <TASK> [ 1495.988759][ T1577] __schedule+0xdb0/0x25c0 [ 1495.988759][ T1577] __schedule+0xdb0/0x25c0 [ 1496.003849][ T1577] ? io_schedule_timeout+0x180/0x180 [ 1496.020839][ T1577] ? lock_downgrade+0x680/0x680 [ 1496.036854][ T1577] ? do_raw_spin_lock+0x125/0x2c0 [ 1496.051976][ T1577] schedule+0xe4/0x280 [ 1496.067780][ T1577] schedule_preempt_disabled+0x18/0x40 [ 1496.085004][ T1577] __ww_mutex_lock+0x1248/0x34c0 [ 1496.101895][ T1577] ? test_cycle_work+0x1bb/0x500 [test_ww_mutex] [ 1496.119889][ T1577] ? mutex_lock_interruptible_nested+0x40/0x40 [ 1496.137873][ T1577] ? lock_downgrade+0x680/0x680 [ 1496.152657][ T1577] ? wait_for_completion_interruptible+0x340/0x340 [ 1496.168773][ T1577] ? ww_mutex_lock+0x3e/0x380 [ 1496.184862][ T1577] ww_mutex_lock+0x3e/0x380 [ 1496.199979][ T1577] test_cycle_work+0x1bb/0x500 [test_ww_mutex] [ 1496.216277][ T1577] ? stress_reorder_work+0xa00/0xa00 [test_ww_mutex] [ 1496.234904][ T1577] ? 0xffffffff81000000 [ 1496.249856][ T1577] ? rcu_read_lock_sched_held+0x5f/0x100 [ 1496.265951][ T1577] ? rcu_read_lock_bh_held+0xc0/0xc0 [ 1496.282815][ T1577] process_one_work+0x817/0x13c0 [ 1496.299791][ T1577] ? rcu_read_unlock+0x40/0x40 [ 1496.314754][ T1577] ? pwq_dec_nr_in_flight+0x280/0x280 [ 1496.331779][ T1577] ? rwlock_bug+0xc0/0xc0 [ 1496.348007][ T1577] worker_thread+0x8b/0xd80 [ 1496.362905][ T1577] ? process_one_work+0x13c0/0x13c0 [ 1496.378975][ T1577] kthread+0x3b9/0x4c0 [ 1496.393866][ T1577] ? set_kthread_struct+0x100/0x100 [ 1496.408827][ T1577] ret_from_fork+0x22/0x30 [ 1496.423901][ T1577] </TASK> [ 1496.437994][ T1577] INFO: task kworker/u576:0:15113 blocked for more than 492 seconds. [ 1496.455862][ T1577] Tainted: G B 5.16.0-rc2 #1 [ 1496.473759][ T1577] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1496.494808][ T1577] task:kworker/u576:0 state:D stack: 0 pid:15113 ppid: 2 flags:0x00004000 [ 1496.517000][ T1577] Workqueue: test-ww_mutex test_cycle_work [test_ww_mutex] [ 1496.537035][ T1577] Call Trace: [ 1496.551187][ T1577] <TASK> [ 1496.566405][ T1577] __schedule+0xdb0/0x25c0 [ 1496.582012][ T1577] ? io_schedule_timeout+0x180/0x180 [ 1496.598049][ T1577] ? lock_downgrade+0x680/0x680 [ 1496.615360][ T1577] ? do_raw_spin_lock+0x125/0x2c0 [ 1496.631835][ T1577] schedule+0xe4/0x280 [ 1496.645972][ T1577] schedule_preempt_disabled+0x18/0x40 [ 1496.663774][ T1577] __ww_mutex_lock+0x1248/0x34c0 [ 1496.681795][ T1577] ? test_cycle_work+0x1bb/0x500 [test_ww_mutex] [ 1496.698731][ T1577] ? mutex_lock_interruptible_nested+0x40/0x40 [ 1496.714996][ T1577] ? lock_downgrade+0x680/0x680 [ 1496.730888][ T1577] ? wait_for_completion_interruptible+0x340/0x340 [ 1496.747926][ T1577] ? ww_mutex_lock+0x3e/0x380 [ 1496.762482][ T1577] ww_mutex_lock+0x3e/0x380 [ 1496.778844][ T1577] test_cycle_work+0x1bb/0x500 [test_ww_mutex] And, we found that it occasionally hangs on v5.16-rc3 (1/3 runs), below is a good dmesg. [ 962.136756][ T2950] make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-d58071a8a76d779eedab38033ae4c821c30295a5/tools/testing/selftests/locking' [ 962.136831][ T2950]- [ 962.205036][ T2950] TAP version 13 [ 962.206003][ T2950]- [ 962.298458][ T2950] 1..1 [ 962.299657][ T2950]- [ 962.345588][ T2950] # selftests: locking: ww_mutex.sh [ 962.345657][ T2950]- [ 973.641869][T25509] All ww mutex selftests passed [ 973.773996][ T2950] # locking/ww_mutex: ok [ 973.774068][ T2950]- [ 973.774236][ T2960] # locking/ww_mutex: ok [ 973.802355][ T2960]- [ 973.829966][ T2950] ok 1 selftests: locking: ww_mutex.sh [ 973.834748][ T2950]- [ 973.838302][ T2960] ok 1 selftests: locking: ww_mutex.sh [ 973.899815][ T2960]- [ 973.921431][ T2950] make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-d58071a8a76d779eedab38033ae4c821c30295a5/tools/testing/selftests/locking' [ 973.932312][ T2950]- [ 973.957345][ T2960] make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-d58071a8a76d779eedab38033ae4c821c30295a5/tools/testing/selftests/locking' Thanks Zhijian@0Day

5 months

3
3
0 0

[PATCH v2] selftests/kselftest/runner/run_one(): Allow running non-executable files

by SeongJae Park

From: SeongJae Park <sjpark(a)amazon.de> When running a test program, 'run_one()' checks if the program has the execution permission and fails if it doesn't. However, it's easy to mistakenly missing the permission, as some common tools like 'diff' don't support the permission change well[1]. Compared to that, making mistakes in the test program's path would only rare, as those are explicitly listed in 'TEST_PROGS'. Therefore, it might make more sense to resolve the situation on our own and run the program. For the reason, this commit makes the test program runner function to still print the warning message but try parsing the interpreter of the program and explicitly run it with the interpreter, in the case. [1] https://lore.kernel.org/mm-commits/YRJisBs9AunccCD4@kroah.com/ Suggested-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: SeongJae Park <sjpark(a)amazon.de> --- Changes from v1 (https://lore.kernel.org/linux-kselftest/20210810140459.23990-1-sj38.park@gm…) - Parse and use the interpreter instead of changing the file tools/testing/selftests/kselftest/runner.sh | 28 +++++++++++++-------- 1 file changed, 18 insertions(+), 10 deletions(-) diff --git a/tools/testing/selftests/kselftest/runner.sh b/tools/testing/selftests/kselftest/runner.sh index cc9c846585f0..a9ba782d8ca0 100644 --- a/tools/testing/selftests/kselftest/runner.sh +++ b/tools/testing/selftests/kselftest/runner.sh @@ -33,9 +33,9 @@ tap_timeout() { # Make sure tests will time out if utility is available. if [ -x /usr/bin/timeout ] ; then - /usr/bin/timeout --foreground "$kselftest_timeout" "$1" + /usr/bin/timeout --foreground "$kselftest_timeout" $1 else - "$1" + $1 fi } @@ -65,17 +65,25 @@ run_one() TEST_HDR_MSG="selftests: $DIR: $BASENAME_TEST" echo "# $TEST_HDR_MSG" - if [ ! -x "$TEST" ]; then - echo -n "# Warning: file $TEST is " - if [ ! -e "$TEST" ]; then - echo "missing!" - else - echo "not executable, correct this." - fi + if [ ! -e "$TEST" ]; then + echo "# Warning: file $TEST is missing!" echo "not ok $test_num $TEST_HDR_MSG" else + cmd="./$BASENAME_TEST" + if [ ! -x "$TEST" ]; then + echo "# Warning: file $TEST is not executable" + + if [ $(head -n 1 "$TEST" | cut -c -2) = "#!" ] + then + interpreter=$(head -n 1 "$TEST" | cut -c 3-) + cmd="$interpreter ./$BASENAME_TEST" + else + echo "not ok $test_num $TEST_HDR_MSG" + return + fi + fi cd `dirname $TEST` > /dev/null - ((((( tap_timeout ./$BASENAME_TEST 2>&1; echo $? >&3) | + ((((( tap_timeout "$cmd" 2>&1; echo $? >&3) | tap_prefix >&4) 3>&1) | (read xs; exit $xs)) 4>>"$logfile" && echo "ok $test_num $TEST_HDR_MSG") || -- 2.17.1

7 months, 2 weeks

3
6
0 0

[PATCH v2] selftests: netfilter: fix a build error on openSUSE

by Geliang Tang

This patch fixed the following build error on openSUSE Leap 15.3: ======================================================================= gcc nf-queue.c -lmnl -o tools/testing/selftests/netfilter/nf-queue nf-queue.c:13:10: fatal error: libmnl/libmnl.h: No such file or directory #include <libmnl/libmnl.h> ^~~~~~~~~~~~~~~~~ compilation terminated. ======================================================================= It is because libmnl.h is put in the directory of "/usr/include/libmnl/libmnl/" on openSUSE, not "/usr/include/libmnl/": > rpm -ql libmnl-devel /usr/include/libmnl /usr/include/libmnl/libmnl /usr/include/libmnl/libmnl/libmnl.h /usr/lib64/libmnl.so /usr/lib64/pkgconfig/libmnl.pc Suggested-by: Kai Liu <kai.liu(a)suse.com> Signed-off-by: Geliang Tang <geliang.tang(a)suse.com> --- v2: - use pkg-config --- tools/testing/selftests/netfilter/Makefile | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/testing/selftests/netfilter/Makefile b/tools/testing/selftests/netfilter/Makefile index e4f845dd942b..8136c1fab7ab 100644 --- a/tools/testing/selftests/netfilter/Makefile +++ b/tools/testing/selftests/netfilter/Makefile @@ -8,6 +8,7 @@ TEST_PROGS := nft_trans_stress.sh nft_fib.sh nft_nat.sh bridge_brouter.sh \ ipip-conntrack-mtu.sh conntrack_tcp_unreplied.sh \ conntrack_vrf.sh nft_synproxy.sh +CFLAGS += $(shell pkg-config --cflags libmnl 2>/dev/null || echo "-I/usr/include/libmnl") LDLIBS = -lmnl TEST_GEN_FILES = nf-queue -- 2.34.1

7 months, 2 weeks

5
9
0 0

[PATCH v2 net-next] selftests: forwarding: add Per-Stream Filtering and Policing test for Ocelot

by Vladimir Oltean

The Felix VSC9959 switch in NXP LS1028A supports the tc-gate action which enforced time-based access control per stream. A stream as seen by this switch is identified by {MAC DA, VID}. We use the standard forwarding selftest topology with 2 host interfaces and 2 switch interfaces. The host ports must require timestamping non-IP packets and supporting tc-etf offload, for isochron to work. The isochron program monitors network sync status (ptp4l, phc2sys) and deterministically transmits packets to the switch such that the tc-gate action either (a) always accepts them based on its schedule, or (b) always drops them. I tried to keep as much of the logic that isn't specific to the NXP LS1028A in a new tsn_lib.sh, for future reuse. This covers synchronization using ptp4l and phc2sys, and isochron. The cycle-time chosen for this selftest isn't particularly impressive (and the focus is the functionality of the switch), but I didn't really know what to do better, considering that it will mostly be run during debugging sessions, various kernel bloatware would be enabled, like lockdep, KASAN, etc, and we certainly can't run any races with those on. I tried to look through the kselftest framework for other real time applications and didn't really find any, so I'm not sure how better to prepare the environment in case we want to go for a lower cycle time. At the moment, the only thing the selftest is ensuring is that dynamic frequency scaling is disabled on the CPU that isochron runs on. It would probably be useful to have a blacklist of kernel config options (checked through zcat /proc/config.gz) and some cyclictest scripts to run beforehand, but I saw none of those. Signed-off-by: Vladimir Oltean <vladimir.oltean(a)nxp.com> --- v1->v2: - fix an off-by-one bug introduced at the last minute regarding which tc-mqprio queue was used for tc-etf and SO_TXTIME - introduce debugging for packets incorrectly received / incorrectly dropped based on "isochron report" - make the tsn_lib.sh dependency on isochron and linuxptp optional via REQUIRE_ISOCHRON and REQUIRE_LINUXPTP - avoid errors when CONFIG_CPU_FREQ is disabled - consistently use SCHED_FIFO instead of SCHED_RR for the isochron receiver .../selftests/drivers/net/ocelot/psfp.sh | 327 ++++++++++++++++++ .../selftests/net/forwarding/tsn_lib.sh | 235 +++++++++++++ 2 files changed, 562 insertions(+) create mode 100755 tools/testing/selftests/drivers/net/ocelot/psfp.sh create mode 100644 tools/testing/selftests/net/forwarding/tsn_lib.sh diff --git a/tools/testing/selftests/drivers/net/ocelot/psfp.sh b/tools/testing/selftests/drivers/net/ocelot/psfp.sh new file mode 100755 index 000000000000..5a5cee92c665 --- /dev/null +++ b/tools/testing/selftests/drivers/net/ocelot/psfp.sh @@ -0,0 +1,327 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright 2021-2022 NXP + +# Note: On LS1028A, in lack of enough user ports, this setup requires patching +# the device tree to use the second CPU port as a user port + +WAIT_TIME=1 +NUM_NETIFS=4 +STABLE_MAC_ADDRS=yes +NETIF_CREATE=no +lib_dir=$(dirname $0)/../../../net/forwarding +source $lib_dir/tc_common.sh +source $lib_dir/lib.sh +source $lib_dir/tsn_lib.sh + +UDS_ADDRESS_H1="/var/run/ptp4l_h1" +UDS_ADDRESS_SWP1="/var/run/ptp4l_swp1" + +# Tunables +NUM_PKTS=1000 +STREAM_VID=100 +STREAM_PRIO=6 +# Use a conservative cycle of 10 ms to allow the test to still pass when the +# kernel has some extra overhead like lockdep etc +CYCLE_TIME_NS=10000000 +# Create two Gate Control List entries, one OPEN and one CLOSE, of equal +# durations +GATE_DURATION_NS=$((${CYCLE_TIME_NS} / 2)) +# Give 2/3 of the cycle time to user space and 1/3 to the kernel +FUDGE_FACTOR=$((${CYCLE_TIME_NS} / 3)) +# Shift the isochron base time by half the gate time, so that packets are +# always received by swp1 close to the middle of the time slot, to minimize +# inaccuracies due to network sync +SHIFT_TIME_NS=$((${GATE_DURATION_NS} / 2)) + +h1=${NETIFS[p1]} +swp1=${NETIFS[p2]} +swp2=${NETIFS[p3]} +h2=${NETIFS[p4]} + +H1_IPV4="192.0.2.1" +H2_IPV4="192.0.2.2" +H1_IPV6="2001:db8:1::1" +H2_IPV6="2001:db8:1::2" + +# Chain number exported by the ocelot driver for +# Per-Stream Filtering and Policing filters +PSFP() +{ + echo 30000 +} + +psfp_chain_create() +{ + local if_name=$1 + + tc qdisc add dev $if_name clsact + + tc filter add dev $if_name ingress chain 0 pref 49152 flower \ + skip_sw action goto chain $(PSFP) +} + +psfp_chain_destroy() +{ + local if_name=$1 + + tc qdisc del dev $if_name clsact +} + +psfp_filter_check() +{ + local expected=$1 + local packets="" + local drops="" + local stats="" + + stats=$(tc -j -s filter show dev ${swp1} ingress chain $(PSFP) pref 1) + packets=$(echo ${stats} | jq ".[1].options.actions[].stats.packets") + drops=$(echo ${stats} | jq ".[1].options.actions[].stats.drops") + + if ! [ "${packets}" = "${expected}" ]; then + printf "Expected filter to match on %d packets but matched on %d instead\n" \ + "${expected}" "${packets}" + fi + + echo "Hardware filter reports ${drops} drops" +} + +h1_create() +{ + simple_if_init $h1 $H1_IPV4/24 $H1_IPV6/64 +} + +h1_destroy() +{ + simple_if_fini $h1 $H1_IPV4/24 $H1_IPV6/64 +} + +h2_create() +{ + simple_if_init $h2 $H2_IPV4/24 $H2_IPV6/64 +} + +h2_destroy() +{ + simple_if_fini $h2 $H2_IPV4/24 $H2_IPV6/64 +} + +switch_create() +{ + local h2_mac_addr=$(mac_get $h2) + + ip link set ${swp1} up + ip link set ${swp2} up + + ip link add br0 type bridge vlan_filtering 1 + ip link set ${swp1} master br0 + ip link set ${swp2} master br0 + ip link set br0 up + + bridge vlan add dev ${swp2} vid ${STREAM_VID} + bridge vlan add dev ${swp1} vid ${STREAM_VID} + # PSFP on Ocelot requires the filter to also be added to the bridge + # FDB, and not be removed + bridge fdb add dev ${swp2} \ + ${h2_mac_addr} vlan ${STREAM_VID} static master + + psfp_chain_create ${swp1} + + tc filter add dev ${swp1} ingress chain $(PSFP) pref 1 \ + protocol 802.1Q flower skip_sw \ + dst_mac ${h2_mac_addr} vlan_id ${STREAM_VID} \ + action gate base-time 0.000000000 \ + sched-entry OPEN ${GATE_DURATION_NS} -1 -1 \ + sched-entry CLOSE ${GATE_DURATION_NS} -1 -1 +} + +switch_destroy() +{ + psfp_chain_destroy ${swp1} + ip link del br0 +} + +txtime_setup() +{ + local if_name=$1 + + tc qdisc add dev ${if_name} clsact + # Classify PTP on TC 7 and isochron on TC 6 + tc filter add dev ${if_name} egress protocol 0x88f7 \ + flower action skbedit priority 7 + tc filter add dev ${if_name} egress protocol 802.1Q \ + flower vlan_ethtype 0xdead action skbedit priority 6 + tc qdisc add dev ${if_name} handle 100: parent root mqprio num_tc 8 \ + queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \ + map 0 1 2 3 4 5 6 7 \ + hw 1 + # Set up TC 6 for SO_TXTIME. tc-mqprio queues count from 1. + tc qdisc replace dev ${if_name} parent 100:$((${STREAM_PRIO} + 1)) etf \ + clockid CLOCK_TAI offload delta ${FUDGE_FACTOR} +} + +txtime_cleanup() +{ + local if_name=$1 + + tc qdisc del dev ${if_name} root + tc qdisc del dev ${if_name} clsact +} + +setup_prepare() +{ + vrf_prepare + + h1_create + h2_create + switch_create + + txtime_setup ${h1} + + # Set up swp1 as a master PHC for h1, synchronized to the local + # CLOCK_REALTIME. + phc2sys_start ${swp1} ${UDS_ADDRESS_SWP1} + + # Assumption true for LS1028A: h1 and h2 use the same PHC. So by + # synchronizing h1 to swp1 via PTP, h2 is also implicitly synchronized + # to swp1 (and both to CLOCK_REALTIME). + ptp4l_start ${h1} true ${UDS_ADDRESS_H1} + ptp4l_start ${swp1} false ${UDS_ADDRESS_SWP1} + + # Make sure there are no filter matches at the beginning of the test + psfp_filter_check 0 +} + +cleanup() +{ + pre_cleanup + + ptp4l_stop ${swp1} + ptp4l_stop ${h1} + phc2sys_stop + isochron_recv_stop + + txtime_cleanup ${h1} + + h2_destroy + h1_destroy + switch_destroy + + vrf_cleanup +} + +debug_incorrectly_dropped_packets() +{ + local isochron_dat=$1 + local dropped_seqids + local seqid + + echo "Packets incorrectly dropped:" + + dropped_seqids=$(isochron report \ + --input-file "${isochron_dat}" \ + --printf-format "%u RX hw %T\n" \ + --printf-args "qR" | \ + grep 'RX hw 0.000000000' | \ + awk '{print $1}') + + for seqid in ${dropped_seqids}; do + isochron report \ + --input-file "${isochron_dat}" \ + --start ${seqid} --stop ${seqid} \ + --printf-format "seqid %u scheduled for %T, HW TX timestamp %T\n" \ + --printf-args "qST" + done +} + +debug_incorrectly_received_packets() +{ + local isochron_dat=$1 + + echo "Packets incorrectly received:" + + isochron report \ + --input-file "${isochron_dat}" \ + --printf-format "seqid %u scheduled for %T, HW TX timestamp %T, HW RX timestamp %T\n" \ + --printf-args "qSTR" | + grep -v 'HW RX timestamp 0.000000000' +} + +run_test() +{ + local base_time=$1 + local expected=$2 + local test_name=$3 + local debug=$4 + local isochron_dat="$(mktemp)" + local extra_args="" + local received + + isochron_do \ + "${h1}" \ + "${h2}" \ + "${UDS_ADDRESS_H1}" \ + "" \ + "${base_time}" \ + "${CYCLE_TIME_NS}" \ + "${SHIFT_TIME_NS}" \ + "${NUM_PKTS}" \ + "${STREAM_VID}" \ + "${STREAM_PRIO}" \ + "" \ + "${isochron_dat}" + + # Count all received packets by looking at the non-zero RX timestamps + received=$(isochron report \ + --input-file "${isochron_dat}" \ + --printf-format "%u\n" --printf-args "R" | \ + grep -w -v '0' | wc -l) + + if [ "${received}" = "${expected}" ]; then + RET=0 + else + RET=1 + echo "Expected isochron to receive ${expected} packets but received ${received}" + fi + + log_test "${test_name}" + + if [ "$RET" = "1" ]; then + ${debug} "${isochron_dat}" + fi + + rm ${isochron_dat} 2> /dev/null +} + +test_gate_in_band() +{ + # Send packets in-band with the OPEN gate entry + run_test 0.000000000 ${NUM_PKTS} "In band" \ + debug_incorrectly_dropped_packets + + psfp_filter_check ${NUM_PKTS} +} + +test_gate_out_of_band() +{ + # Send packets in-band with the CLOSE gate entry + run_test 0.005000000 0 "Out of band" \ + debug_incorrectly_received_packets + + psfp_filter_check $((2 * ${NUM_PKTS})) +} + +trap cleanup EXIT + +ALL_TESTS=" + test_gate_in_band + test_gate_out_of_band +" + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/net/forwarding/tsn_lib.sh b/tools/testing/selftests/net/forwarding/tsn_lib.sh new file mode 100644 index 000000000000..60a1423e8116 --- /dev/null +++ b/tools/testing/selftests/net/forwarding/tsn_lib.sh @@ -0,0 +1,235 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright 2021-2022 NXP + +REQUIRE_ISOCHRON=${REQUIRE_ISOCHRON:=yes} +REQUIRE_LINUXPTP=${REQUIRE_LINUXPTP:=yes} + +# Tunables +UTC_TAI_OFFSET=37 +ISOCHRON_CPU=1 + +if [[ "$REQUIRE_ISOCHRON" = "yes" ]]; then + # https://github.com/vladimiroltean/tsn-scripts + # WARNING: isochron versions pre-1.0 are unstable, + # always use the latest version + require_command isochron +fi +if [[ "$REQUIRE_LINUXPTP" = "yes" ]]; then + require_command phc2sys + require_command ptp4l +fi + +phc2sys_start() +{ + local if_name=$1 + local uds_address=$2 + local extra_args="" + + if ! [ -z "${uds_address}" ]; then + extra_args="${extra_args} -z ${uds_address}" + fi + + phc2sys_log="$(mktemp)" + + chrt -f 10 phc2sys -m \ + -c ${if_name} \ + -s CLOCK_REALTIME \ + -O ${UTC_TAI_OFFSET} \ + --step_threshold 0.00002 \ + --first_step_threshold 0.00002 \ + ${extra_args} \ + > "${phc2sys_log}" 2>&1 & + phc2sys_pid=$! + + echo "phc2sys logs to ${phc2sys_log} and has pid ${phc2sys_pid}" + + sleep 1 +} + +phc2sys_stop() +{ + { kill ${phc2sys_pid} && wait ${phc2sys_pid}; } 2> /dev/null + rm "${phc2sys_log}" 2> /dev/null +} + +ptp4l_start() +{ + local if_name=$1 + local slave_only=$2 + local uds_address=$3 + local log="ptp4l_log_${if_name}" + local pid="ptp4l_pid_${if_name}" + local extra_args="" + + if [ "${slave_only}" = true ]; then + extra_args="${extra_args} -s" + fi + + # declare dynamic variables ptp4l_log_${if_name} and ptp4l_pid_${if_name} + # as global, so that they can be referenced later + declare -g "${log}=$(mktemp)" + + chrt -f 10 ptp4l -m -2 -P \ + -i ${if_name} \ + --step_threshold 0.00002 \ + --first_step_threshold 0.00002 \ + --tx_timestamp_timeout 100 \ + --uds_address="${uds_address}" \ + ${extra_args} \ + > "${!log}" 2>&1 & + declare -g "${pid}=$!" + + echo "ptp4l for interface ${if_name} logs to ${!log} and has pid ${!pid}" + + sleep 1 +} + +ptp4l_stop() +{ + local if_name=$1 + local log="ptp4l_log_${if_name}" + local pid="ptp4l_pid_${if_name}" + + { kill ${!pid} && wait ${!pid}; } 2> /dev/null + rm "${!log}" 2> /dev/null +} + +cpufreq_max() +{ + local cpu=$1 + local freq="cpu${cpu}_freq" + local governor="cpu${cpu}_governor" + + # Kernel may be compiled with CONFIG_CPU_FREQ disabled + if ! [ -d /sys/bus/cpu/devices/cpu${cpu}/cpufreq ]; then + return + fi + + # declare dynamic variables cpu${cpu}_freq and cpu${cpu}_governor as + # global, so they can be referenced later + declare -g "${freq}=$(cat /sys/bus/cpu/devices/cpu${cpu}/cpufreq/scaling_min_freq)" + declare -g "${governor}=$(cat /sys/bus/cpu/devices/cpu${cpu}/cpufreq/scaling_governor)" + + cat /sys/bus/cpu/devices/cpu${cpu}/cpufreq/scaling_max_freq > \ + /sys/bus/cpu/devices/cpu${cpu}/cpufreq/scaling_min_freq + echo -n "performance" > \ + /sys/bus/cpu/devices/cpu${cpu}/cpufreq/scaling_governor +} + +cpufreq_restore() +{ + local cpu=$1 + local freq="cpu${cpu}_freq" + local governor="cpu${cpu}_governor" + + if ! [ -d /sys/bus/cpu/devices/cpu${cpu}/cpufreq ]; then + return + fi + + echo "${!freq}" > /sys/bus/cpu/devices/cpu${cpu}/cpufreq/scaling_min_freq + echo -n "${!governor}" > \ + /sys/bus/cpu/devices/cpu${cpu}/cpufreq/scaling_governor +} + +isochron_recv_start() +{ + local if_name=$1 + local uds=$2 + local extra_args=$3 + + if ! [ -z "${uds}" ]; then + extra_args="--unix-domain-socket ${uds}" + fi + + isochron rcv \ + --interface ${if_name} \ + --sched-priority 98 \ + --sched-fifo \ + --utc-tai-offset ${UTC_TAI_OFFSET} \ + --quiet \ + ${extra_args} & \ + isochron_pid=$! + + sleep 1 +} + +isochron_recv_stop() +{ + { kill ${isochron_pid} && wait ${isochron_pid}; } 2> /dev/null +} + +isochron_do() +{ + local sender_if_name=$1; shift + local receiver_if_name=$1; shift + local sender_uds=$1; shift + local receiver_uds=$1; shift + local base_time=$1; shift + local cycle_time=$1; shift + local shift_time=$1; shift + local num_pkts=$1; shift + local vid=$1; shift + local priority=$1; shift + local dst_ip=$1; shift + local isochron_dat=$1; shift + local extra_args="" + local receiver_extra_args="" + local vrf="$(master_name_get ${sender_if_name})" + local use_l2="true" + + if ! [ -z "${dst_ip}" ]; then + use_l2="false" + fi + + if ! [ -z "${vrf}" ]; then + dst_ip="${dst_ip}%${vrf}" + fi + + if ! [ -z "${vid}" ]; then + vid="--vid=${vid}" + fi + + if [ -z "${receiver_uds}" ]; then + extra_args="${extra_args} --omit-remote-sync" + fi + + if ! [ -z "${shift_time}" ]; then + extra_args="${extra_args} --shift-time=${shift_time}" + fi + + if [ "${use_l2}" = "true" ]; then + extra_args="${extra_args} --l2 --etype=0xdead ${vid}" + receiver_extra_args="--l2 --etype=0xdead" + else + extra_args="${extra_args} --l4 --ip-destination=${dst_ip}" + receiver_extra_args="--l4" + fi + + cpufreq_max ${ISOCHRON_CPU} + + isochron_recv_start "${h2}" "${receiver_uds}" "${receiver_extra_args}" + + isochron send \ + --interface ${sender_if_name} \ + --unix-domain-socket ${sender_uds} \ + --priority ${priority} \ + --base-time ${base_time} \ + --cycle-time ${cycle_time} \ + --num-frames ${num_pkts} \ + --frame-size 64 \ + --txtime \ + --utc-tai-offset ${UTC_TAI_OFFSET} \ + --cpu-mask $((1 << ${ISOCHRON_CPU})) \ + --sched-fifo \ + --sched-priority 98 \ + --client 127.0.0.1 \ + --sync-threshold 5000 \ + --output-file ${isochron_dat} \ + ${extra_args} \ + --quiet + + isochron_recv_stop + + cpufreq_restore ${ISOCHRON_CPU} +} -- 2.25.1

9 months, 3 weeks

5
13
0 0

[PATCH net-next v2 0/3] net: introduce rps_default_mask

by Paolo Abeni

Real-time setups try hard to ensure proper isolation between time critical applications and e.g. network processing performed by the network stack in softirq and RPS is used to move the softirq activity away from the isolated core. If the network configuration is dynamic, with netns and devices routinely created at run-time, enforcing the correct RPS setting on each newly created device allowing to transient bad configuration became complex. These series try to address the above, introducing a new sysctl knob: rps_default_mask. The new sysctl entry allows configuring a systemwide RPS mask, to be enforced since receive queue creation time without any fourther per device configuration required. Additionally, a simple self-test is introduced to check the rps_default_mask behavior. v1 -> v2: - fix sparse warning in patch 2/3 Paolo Abeni (3): net/sysctl: factor-out netdev_rx_queue_set_rps_mask() helper net/core: introduce default_rps_mask netns attribute self-tests: introduce self-tests for RPS default mask Documentation/admin-guide/sysctl/net.rst | 6 ++ include/linux/netdevice.h | 1 + net/core/net-sysfs.c | 73 +++++++++++-------- net/core/sysctl_net_core.c | 58 +++++++++++++++ tools/testing/selftests/net/Makefile | 1 + tools/testing/selftests/net/config | 3 + .../testing/selftests/net/rps_default_mask.sh | 57 +++++++++++++++ 7 files changed, 169 insertions(+), 30 deletions(-) create mode 100755 tools/testing/selftests/net/rps_default_mask.sh -- 2.26.2

10 months, 1 week

4
12
0 0

[PATCH v14 00/39] arm64/sme: Initial support for the Scalable Matrix Extension

by Mark Brown

This series provides initial support for the ARMv9 Scalable Matrix Extension (SME). SME takes the approach used for vectors in SVE and extends this to provide architectural support for matrix operations. A more detailed overview can be found in [1]. For the kernel SME can be thought of as a series of features which are intended to be used together by applications but operate mostly orthogonally: - The ZA matrix register. - Streaming mode, in which ZA can be accessed and a subset of SVE features are available. - A second vector length, used for streaming mode SVE and ZA and controlled using a similar interface to that for SVE. - TPIDR2, a new userspace controllable system register intended for use by the C library for storing context related to the ZA ABI. A substantial part of the series is dedicated to refactoring the existing SVE support so that we don't need to duplicate code for handling vector lengths and the SVE registers, this involves creating an array of vector types and making the users take the vector type as a parameter. I'm not 100% happy with this but wasn't able to come up with anything better, duplicating code definitely felt like a bad idea so this felt like the least bad thing. If this approach makes sense to people it might make sense to split this off into a separate series and/or merge it while the rest is pending review to try to make things a little more digestable, the series is very large so it'd probably make things easier to digest if some of the preparatory refactoring could be merged before the rest is ready. One feature of the architecture of particular note is that switching to and from streaming mode may change the size of and invalidate the contents of the SVE registers, and when in streaming mode the FFR is not accessible. This complicates aspects of the ABI like signal handling and ptrace. This initial implementation is mainly intended to get the ABI in place, there are several areas which will be worked on going forwards - some of these will be blockers, others could be handled in followup serieses: - SME is currently not supported for KVM guests, this will be done as a followup series. A host system can use SME and run KVM guests but SME is not available in the guests. - The KVM host support is done in a very simplistic way, were anyone to attempt to use it in production there would be performance impacts on hosts with SME support. As part of this we also add enumeration of fine grained traps. - There is not currently ptrace or signal support TPIDR2, this will be done as a followup series. - No support is currently provided for scheduler control of SME or SME applications, given the size of the SME register state the context switch overhead may be noticable so this may be needed especially for real time applications. Similar concerns already exist for larger SVE vector lengths but are amplified for SME, particularly as the vector length increases. - There has been no work on optimising the performance of anything the kernel does. It is not expected that any systems will be encountered that support SME but not SVE, SME is an ARMv9 feature and SVE is mandatory for ARMv9. The code attempts to handle any such systems that are encountered but this hasn't been tested extensively. v14: - Rebase onto v5.18-rc3. v13: - Preserve ZA in both parent and child on clone() and add a test case for this. - Fix EFI integration for FA64. - Minor tweaks to the ABI document following Catlain's review. - Add and make use of thread_get_cur_vl() helper. - Fix some issues with SVE/FPSIMD register type moves in streaming SVE ptrace. - Typo fixes. - Roll in separately posted series extending ptrace coverage in kselftest for better integrated testing of the series. v12: - Fix some typos in the ABI document. - Print a message when we skip a vector length in the signal tests. - Add note of earliest toolchain versions with SME to manual encodings for future reference now that's landed. - Drop reference to PCS in sme.rst, it's not referenced and one of the links was broken. - Encode smstop and smstart as sysregs in the kernel. - Don't redundantly flush the SVE register state when loading FPSIMD state with SME enabled for the task, the architecture will do this for us. - Introduce and use task_get_cur_vl() to get the vector length for the currently active SVE registers. - Fix support for !FA64 mode in signal and syscall tests. - Simplify instruction sequence for ssve_regs signal test. - Actually include the ZA signal test in the patch set. v11: - Rebase onto v5.17-rc3. - Provide a sme-inst.h to collect manual encodings in kselftest. v10: - Actually do the rebase of fixups from the previous version into relevant patches. v9: - Remove defensive programming around IS_ENABLED() and FGT in KVM code. - Fix naming of TPIDR2 FGT register bit. - Add patches making handling of floating point register bits more consistent (also sent as separate series). - Drop now unused enumeration of fine grained traps. v8: - Rebase onto v5.17-rc1. - Support interoperation with KVM, SME is disabled for KVM guests with minimal handling for cleaning up SME state when entering and leaving the guest. - Document and implement that signal handlers are invoked with ZA and streaming mode disabled. - Use the RDSVL instruction introduced in EAC2 of the architecture to obtain the streaming mode vector length during enumeration, ZA state loading/saving and in test programs. - Store a pointer to SVCR in fpsimd_last_state and use it in fpsimd_save() for interoperation with KVM. - Add a test case sme_trap_no_sm checking that we generate a SIGILL when using an instruction that requires streaming mode without enabling it. - Add basic ZA context form validation to testcases helper library. - Move signal tests over to validating streaming VL from ZA information. - Pulled in patch removing ARRAY_SIZE() so that kselftest builds cleanly and to avoid trivial conflicts. v7: - Rebase onto v5.16-rc3. - Reduce indentation when supporting custom triggers for signal tests as suggested by Catalin. - Change to specifying a width for all CPU features rather than adding single bit specific infrastructure. - Don't require zeroing of non-shared SVE state during syscalls. v6: - Rebase onto v5.16-rc1. - Return to disabling TIF_SVE on kernel entry even if we have SME state, this avoids the need for KVM to handle the case where TIF_SVE is set on guest entry. - Add syscall-abi.h to SME updates to syscall-abi, mistakenly omitted from commit. v5: - Rebase onto currently merged SVE and kselftest patches. - Add support for the FA64 option, introduced in the recently published EAC1 update to the specification. - Pull in test program for the syscall ABI previously sent separately with some revisions and add coverage for the SME ABI. - Fix checking for options with 1 bit fields in ID_AA64SMFR0_EL1. - Minor fixes and clarifications to the ABI documentation. v4: - Rebase onto merged patches. - Remove an uneeded NULL check in vec_proc_do_default_vl(). - Include patch to factor out utility routines in kselftests written in assembler. - Specify -ffreestanding when building TPIDR2 test. v3: - Skip FFR rather than predicate registers in sve_flush_live(). - Don't assume a bool is all zeros in sve_flush_live() as per AAPCS. - Don't redundantly specify a zero index when clearing FFR. v2: - Fix several issues with !SME and !SVE configurations. - Preserve TPIDR2 when creating a new thread/process unless CLONE_SETTLS is set. - Report traps due to using features in an invalid mode as SIGILL. - Spell out streaming mode behaviour in SVE ABI documentation more directly. - Document TPIDR2 in the ABI document. - Use SMSTART and SMSTOP rather than read/modify/write sequences. - Rework logic for exiting streaming mode on syscall. - Don't needlessly initialise SVCR on access trap. - Always restore SME VL for userspace if SME traps are disabled. - Only yield to encourage preemption every 128 iterations in za-test, otherwise do a getpid(), and validate SVCR after syscall. - Leave streaming mode disabled except when reading the vector length in za-test, and disable ZA after detecting a mismatch. - Add SME support to vlset. - Clarifications and typo fixes in comments. - Move sme_alloc() forward declaration back a patch. [1] https://community.arm.com/developer/ip-products/processors/b/processors-ip-… Mark Brown (39): kselftest/arm64: Fix comment for ptrace_sve_get_fpsimd_data() kselftest/arm64: Remove assumption that tasks start FPSIMD only kselftest/arm64: Validate setting via FPSIMD and read via SVE regsets arm64/sme: Provide ABI documentation for SME arm64/sme: System register and exception syndrome definitions arm64/sme: Manually encode SME instructions arm64/sme: Early CPU setup for SME arm64/sme: Basic enumeration support arm64/sme: Identify supported SME vector lengths at boot arm64/sme: Implement sysctl to set the default vector length arm64/sme: Implement vector length configuration prctl()s arm64/sme: Implement support for TPIDR2 arm64/sme: Implement SVCR context switching arm64/sme: Implement streaming SVE context switching arm64/sme: Implement ZA context switching arm64/sme: Implement traps and syscall handling for SME arm64/sme: Disable ZA and streaming mode when handling signals arm64/sme: Implement streaming SVE signal handling arm64/sme: Implement ZA signal handling arm64/sme: Implement ptrace support for streaming mode SVE registers arm64/sme: Add ptrace support for ZA arm64/sme: Disable streaming mode and ZA when flushing CPU state arm64/sme: Save and restore streaming mode over EFI runtime calls KVM: arm64: Hide SME system registers from guests KVM: arm64: Trap SME usage in guest KVM: arm64: Handle SME host state when running guests arm64/sme: Provide Kconfig for SME kselftest/arm64: Add manual encodings for SME instructions kselftest/arm64: sme: Add SME support to vlset kselftest/arm64: Add tests for TPIDR2 kselftest/arm64: Extend vector configuration API tests to cover SME kselftest/arm64: sme: Provide streaming mode SVE stress test kselftest/arm64: signal: Handle ZA signal context in core code kselftest/arm64: Add stress test for SME ZA context switching kselftest/arm64: signal: Add SME signal handling tests kselftest/arm64: Add streaming SVE to SVE ptrace tests kselftest/arm64: Add coverage for the ZA ptrace interface kselftest/arm64: Add SME support to syscall ABI test selftests/arm64: Add a testcase for handling of ZA on clone() Documentation/arm64/elf_hwcaps.rst | 33 + Documentation/arm64/index.rst | 1 + Documentation/arm64/sme.rst | 428 +++++++++++++ Documentation/arm64/sve.rst | 70 ++- arch/arm64/Kconfig | 11 + arch/arm64/include/asm/cpu.h | 4 + arch/arm64/include/asm/cpufeature.h | 24 + arch/arm64/include/asm/el2_setup.h | 64 +- arch/arm64/include/asm/esr.h | 13 +- arch/arm64/include/asm/exception.h | 1 + arch/arm64/include/asm/fpsimd.h | 123 +++- arch/arm64/include/asm/fpsimdmacros.h | 87 +++ arch/arm64/include/asm/hwcap.h | 8 + arch/arm64/include/asm/kvm_arm.h | 1 + arch/arm64/include/asm/kvm_host.h | 4 + arch/arm64/include/asm/processor.h | 26 +- arch/arm64/include/asm/sysreg.h | 67 ++ arch/arm64/include/asm/thread_info.h | 2 + arch/arm64/include/uapi/asm/hwcap.h | 8 + arch/arm64/include/uapi/asm/ptrace.h | 69 ++- arch/arm64/include/uapi/asm/sigcontext.h | 55 +- arch/arm64/kernel/cpufeature.c | 106 ++++ arch/arm64/kernel/cpuinfo.c | 13 + arch/arm64/kernel/entry-common.c | 11 + arch/arm64/kernel/entry-fpsimd.S | 36 ++ arch/arm64/kernel/fpsimd.c | 585 ++++++++++++++++-- arch/arm64/kernel/process.c | 44 +- arch/arm64/kernel/ptrace.c | 358 +++++++++-- arch/arm64/kernel/signal.c | 188 +++++- arch/arm64/kernel/syscall.c | 29 +- arch/arm64/kernel/traps.c | 1 + arch/arm64/kvm/fpsimd.c | 43 +- arch/arm64/kvm/hyp/nvhe/switch.c | 30 + arch/arm64/kvm/hyp/vhe/switch.c | 11 +- arch/arm64/kvm/sys_regs.c | 9 +- arch/arm64/tools/cpucaps | 2 + include/uapi/linux/elf.h | 2 + include/uapi/linux/prctl.h | 9 + kernel/sys.c | 12 + tools/testing/selftests/arm64/abi/.gitignore | 1 + tools/testing/selftests/arm64/abi/Makefile | 9 +- .../selftests/arm64/abi/syscall-abi-asm.S | 79 ++- .../testing/selftests/arm64/abi/syscall-abi.c | 204 +++++- .../testing/selftests/arm64/abi/syscall-abi.h | 15 + tools/testing/selftests/arm64/abi/tpidr2.c | 298 +++++++++ tools/testing/selftests/arm64/fp/.gitignore | 5 + tools/testing/selftests/arm64/fp/Makefile | 19 +- tools/testing/selftests/arm64/fp/rdvl-sme.c | 14 + tools/testing/selftests/arm64/fp/rdvl.S | 10 + tools/testing/selftests/arm64/fp/rdvl.h | 1 + tools/testing/selftests/arm64/fp/sme-inst.h | 51 ++ tools/testing/selftests/arm64/fp/ssve-stress | 59 ++ tools/testing/selftests/arm64/fp/sve-ptrace.c | 175 +++++- tools/testing/selftests/arm64/fp/sve-test.S | 20 + tools/testing/selftests/arm64/fp/vec-syscfg.c | 10 + tools/testing/selftests/arm64/fp/vlset.c | 10 +- .../testing/selftests/arm64/fp/za-fork-asm.S | 61 ++ tools/testing/selftests/arm64/fp/za-fork.c | 156 +++++ tools/testing/selftests/arm64/fp/za-ptrace.c | 356 +++++++++++ tools/testing/selftests/arm64/fp/za-stress | 59 ++ tools/testing/selftests/arm64/fp/za-test.S | 388 ++++++++++++ .../testing/selftests/arm64/signal/.gitignore | 3 + .../selftests/arm64/signal/test_signals.h | 4 + .../arm64/signal/test_signals_utils.c | 6 + .../testcases/fake_sigreturn_sme_change_vl.c | 92 +++ .../arm64/signal/testcases/sme_trap_no_sm.c | 38 ++ .../signal/testcases/sme_trap_non_streaming.c | 45 ++ .../arm64/signal/testcases/sme_trap_za.c | 36 ++ .../selftests/arm64/signal/testcases/sme_vl.c | 68 ++ .../arm64/signal/testcases/ssve_regs.c | 135 ++++ .../arm64/signal/testcases/testcases.c | 36 ++ .../arm64/signal/testcases/testcases.h | 3 +- .../arm64/signal/testcases/za_regs.c | 128 ++++ 73 files changed, 4991 insertions(+), 191 deletions(-) create mode 100644 Documentation/arm64/sme.rst create mode 100644 tools/testing/selftests/arm64/abi/syscall-abi.h create mode 100644 tools/testing/selftests/arm64/abi/tpidr2.c create mode 100644 tools/testing/selftests/arm64/fp/rdvl-sme.c create mode 100644 tools/testing/selftests/arm64/fp/sme-inst.h create mode 100644 tools/testing/selftests/arm64/fp/ssve-stress create mode 100644 tools/testing/selftests/arm64/fp/za-fork-asm.S create mode 100644 tools/testing/selftests/arm64/fp/za-fork.c create mode 100644 tools/testing/selftests/arm64/fp/za-ptrace.c create mode 100644 tools/testing/selftests/arm64/fp/za-stress create mode 100644 tools/testing/selftests/arm64/fp/za-test.S create mode 100644 tools/testing/selftests/arm64/signal/testcases/fake_sigreturn_sme_change_vl.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/sme_trap_no_sm.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/sme_trap_non_streaming.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/sme_trap_za.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/sme_vl.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/ssve_regs.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/za_regs.c base-commit: b2d229d4ddb17db541098b83524d901257e93845 -- 2.30.2

1 year

8
58
0 0

[PATCH v2 0/2] livepatch: Move tests from lib/livepatch to selftests/livepatch

by Marcos Paulo de Souza

Hi there, this is the v2 of the patchset. The v1 can be found at [1]. There is only one change in patch 1, which changed the target directory to build the test modules. All other changes happen in patch 2. Thanks for reviewing! Changes from v1: # test_modules/Makefile * Build the test modules targeting /lib/modules, instead of ksrc when building from the kernel source. # test_modules/test_klp_syscall.c * Added a parameter array to receive the pids that should transition to the new system call. (suggedted by Joe) * Create a new sysfs file /sys/kernel/test_klp_syscall/npids to show how many pids from the argument need to transition to the new state. (suggested by Joe) * Fix the PPC32 support by adding the syscall wrapper for archs that select it by default, without erroring out. PPC does not set SYSCALL_WRAPPER, so having it set in v1 was a mistake. (suggested by Joe) * The aarch64 syscall prefix was added too, since the livepatch support will come soon. # test_binaries/test_klp-call_getpid.c * Change %d/%u in printf (suggested byu Joe) * Change run -> stop variable name, and inverted the assignments (suggested by * Joe). # File test-syscall.sh * Fixed test-syscall.sh to call test_klp-call-getpid in test_binaries dir * Load test_klp_syscall passed the pids of the test_klp-call_getpid instances. Check the sysfs file from test_klp_syscall module to check that all pids transitioned correctly. (suggested by Joe) * Simplified the loop that calls test_klp-call_getpid. (suggested by Joe) * Removed the "success" comment from the script, as it's implicit that it succeed. Otherwise load_lp would error out. (suggested by Joe) * Changed the commit message of patch 2 to further detail what means "tricky" when livepatching syscalls. (suggested by Joe) [1]: 20220603143242.870-1-mpdesouza(a)suse.com Marcos Paulo de Souza (2): livepatch: Move tests from lib/livepatch to selftests/livepatch selftests: livepatch: Test livepatching a heavily called syscall arch/s390/configs/debug_defconfig | 1 - arch/s390/configs/defconfig | 1 - lib/Kconfig.debug | 22 --- lib/Makefile | 2 - lib/livepatch/Makefile | 14 -- tools/testing/selftests/livepatch/Makefile | 35 +++- tools/testing/selftests/livepatch/README | 5 +- tools/testing/selftests/livepatch/config | 1 - .../testing/selftests/livepatch/functions.sh | 34 ++-- .../selftests/livepatch/test-callbacks.sh | 50 +++--- .../selftests/livepatch/test-ftrace.sh | 6 +- .../selftests/livepatch/test-livepatch.sh | 10 +- .../selftests/livepatch/test-shadow-vars.sh | 2 +- .../testing/selftests/livepatch/test-state.sh | 18 +-- .../selftests/livepatch/test-syscall.sh | 52 ++++++ .../test_binaries/test_klp-call_getpid.c | 48 ++++++ .../selftests/livepatch/test_modules/Makefile | 20 +++ .../test_modules}/test_klp_atomic_replace.c | 0 .../test_modules}/test_klp_callbacks_busy.c | 0 .../test_modules}/test_klp_callbacks_demo.c | 0 .../test_modules}/test_klp_callbacks_demo2.c | 0 .../test_modules}/test_klp_callbacks_mod.c | 0 .../test_modules}/test_klp_livepatch.c | 0 .../test_modules}/test_klp_shadow_vars.c | 0 .../livepatch/test_modules}/test_klp_state.c | 0 .../livepatch/test_modules}/test_klp_state2.c | 0 .../livepatch/test_modules}/test_klp_state3.c | 0 .../livepatch/test_modules/test_klp_syscall.c | 150 ++++++++++++++++++ 28 files changed, 360 insertions(+), 111 deletions(-) delete mode 100644 lib/livepatch/Makefile create mode 100755 tools/testing/selftests/livepatch/test-syscall.sh create mode 100644 tools/testing/selftests/livepatch/test_binaries/test_klp-call_getpid.c create mode 100644 tools/testing/selftests/livepatch/test_modules/Makefile rename {lib/livepatch => tools/testing/selftests/livepatch/test_modules}/test_klp_atomic_replace.c (100%) rename {lib/livepatch => tools/testing/selftests/livepatch/test_modules}/test_klp_callbacks_busy.c (100%) rename {lib/livepatch => tools/testing/selftests/livepatch/test_modules}/test_klp_callbacks_demo.c (100%) rename {lib/livepatch => tools/testing/selftests/livepatch/test_modules}/test_klp_callbacks_demo2.c (100%) rename {lib/livepatch => tools/testing/selftests/livepatch/test_modules}/test_klp_callbacks_mod.c (100%) rename {lib/livepatch => tools/testing/selftests/livepatch/test_modules}/test_klp_livepatch.c (100%) rename {lib/livepatch => tools/testing/selftests/livepatch/test_modules}/test_klp_shadow_vars.c (100%) rename {lib/livepatch => tools/testing/selftests/livepatch/test_modules}/test_klp_state.c (100%) rename {lib/livepatch => tools/testing/selftests/livepatch/test_modules}/test_klp_state2.c (100%) rename {lib/livepatch => tools/testing/selftests/livepatch/test_modules}/test_klp_state3.c (100%) create mode 100644 tools/testing/selftests/livepatch/test_modules/test_klp_syscall.c -- 2.35.3

1 year

6
21
0 0

[PATCH v6 1/2] selftests: vm: bring common functions to a new file

by Muhammad Usama Anjum

Bring common functions to a new file while keeping code as much same as possible. These functions can be used in the new tests. This helps in avoiding code duplication. Signed-off-by: Muhammad Usama Anjum <usama.anjum(a)collabora.com> --- Changes in V6: - Correct header files inclusion Changes in V5: Keep moved code as same as possible - Updated macros names - Removed macro used to show bit number of dirty bit, added a comment instead - Corrected indentation --- tools/testing/selftests/vm/Makefile | 7 +- tools/testing/selftests/vm/madv_populate.c | 34 +----- .../selftests/vm/split_huge_page_test.c | 79 +------------ tools/testing/selftests/vm/vm_util.c | 108 ++++++++++++++++++ tools/testing/selftests/vm/vm_util.h | 9 ++ 5 files changed, 124 insertions(+), 113 deletions(-) create mode 100644 tools/testing/selftests/vm/vm_util.c create mode 100644 tools/testing/selftests/vm/vm_util.h diff --git a/tools/testing/selftests/vm/Makefile b/tools/testing/selftests/vm/Makefile index 5e43f072f5b76..4e68edb26d6b6 100644 --- a/tools/testing/selftests/vm/Makefile +++ b/tools/testing/selftests/vm/Makefile @@ -34,7 +34,7 @@ TEST_GEN_FILES += hugepage-mremap TEST_GEN_FILES += hugepage-shm TEST_GEN_FILES += hugepage-vmemmap TEST_GEN_FILES += khugepaged -TEST_GEN_FILES += madv_populate +TEST_GEN_PROGS = madv_populate TEST_GEN_FILES += map_fixed_noreplace TEST_GEN_FILES += map_hugetlb TEST_GEN_FILES += map_populate @@ -47,7 +47,7 @@ TEST_GEN_FILES += on-fault-limit TEST_GEN_FILES += thuge-gen TEST_GEN_FILES += transhuge-stress TEST_GEN_FILES += userfaultfd -TEST_GEN_FILES += split_huge_page_test +TEST_GEN_PROGS += split_huge_page_test TEST_GEN_FILES += ksm_tests ifeq ($(MACHINE),x86_64) @@ -91,6 +91,9 @@ TEST_FILES := test_vmalloc.sh KSFT_KHDR_INSTALL := 1 include ../lib.mk +$(OUTPUT)/madv_populate: vm_util.c +$(OUTPUT)/split_huge_page_test: vm_util.c + ifeq ($(MACHINE),x86_64) BINARIES_32 := $(patsubst %,$(OUTPUT)/%,$(BINARIES_32)) BINARIES_64 := $(patsubst %,$(OUTPUT)/%,$(BINARIES_64)) diff --git a/tools/testing/selftests/vm/madv_populate.c b/tools/testing/selftests/vm/madv_populate.c index 3ee0e82756002..715a42e8e2cdb 100644 --- a/tools/testing/selftests/vm/madv_populate.c +++ b/tools/testing/selftests/vm/madv_populate.c @@ -18,6 +18,7 @@ #include <sys/mman.h> #include "../kselftest.h" +#include "vm_util.h" /* * For now, we're using 2 MiB of private anonymous memory for all tests. @@ -26,18 +27,6 @@ static size_t pagesize; -static uint64_t pagemap_get_entry(int fd, char *start) -{ - const unsigned long pfn = (unsigned long)start / pagesize; - uint64_t entry; - int ret; - - ret = pread(fd, &entry, sizeof(entry), pfn * sizeof(entry)); - if (ret != sizeof(entry)) - ksft_exit_fail_msg("reading pagemap failed\n"); - return entry; -} - static bool pagemap_is_populated(int fd, char *start) { uint64_t entry = pagemap_get_entry(fd, start); @@ -46,13 +35,6 @@ static bool pagemap_is_populated(int fd, char *start) return entry & 0xc000000000000000ull; } -static bool pagemap_is_softdirty(int fd, char *start) -{ - uint64_t entry = pagemap_get_entry(fd, start); - - return entry & 0x0080000000000000ull; -} - static void sense_support(void) { char *addr; @@ -258,20 +240,6 @@ static bool range_is_not_softdirty(char *start, ssize_t size) return ret; } -static void clear_softdirty(void) -{ - int fd = open("/proc/self/clear_refs", O_WRONLY); - const char *ctrl = "4"; - int ret; - - if (fd < 0) - ksft_exit_fail_msg("opening clear_refs failed\n"); - ret = write(fd, ctrl, strlen(ctrl)); - if (ret != strlen(ctrl)) - ksft_exit_fail_msg("writing clear_refs failed\n"); - close(fd); -} - static void test_softdirty(void) { char *addr; diff --git a/tools/testing/selftests/vm/split_huge_page_test.c b/tools/testing/selftests/vm/split_huge_page_test.c index 52497b7b9f1db..6aa2b8253aeda 100644 --- a/tools/testing/selftests/vm/split_huge_page_test.c +++ b/tools/testing/selftests/vm/split_huge_page_test.c @@ -16,14 +16,13 @@ #include <sys/mount.h> #include <malloc.h> #include <stdbool.h> +#include "vm_util.h" uint64_t pagesize; unsigned int pageshift; uint64_t pmd_pagesize; -#define PMD_SIZE_PATH "/sys/kernel/mm/transparent_hugepage/hpage_pmd_size" #define SPLIT_DEBUGFS "/sys/kernel/debug/split_huge_pages" -#define SMAP_PATH "/proc/self/smaps" #define INPUT_MAX 80 #define PID_FMT "%d,0x%lx,0x%lx" @@ -51,30 +50,6 @@ int is_backed_by_thp(char *vaddr, int pagemap_file, int kpageflags_file) return 0; } - -static uint64_t read_pmd_pagesize(void) -{ - int fd; - char buf[20]; - ssize_t num_read; - - fd = open(PMD_SIZE_PATH, O_RDONLY); - if (fd == -1) { - perror("Open hpage_pmd_size failed"); - exit(EXIT_FAILURE); - } - num_read = read(fd, buf, 19); - if (num_read < 1) { - close(fd); - perror("Read hpage_pmd_size failed"); - exit(EXIT_FAILURE); - } - buf[num_read] = '\0'; - close(fd); - - return strtoul(buf, NULL, 10); -} - static int write_file(const char *path, const char *buf, size_t buflen) { int fd; @@ -113,58 +88,6 @@ static void write_debugfs(const char *fmt, ...) } } -#define MAX_LINE_LENGTH 500 - -static bool check_for_pattern(FILE *fp, const char *pattern, char *buf) -{ - while (fgets(buf, MAX_LINE_LENGTH, fp) != NULL) { - if (!strncmp(buf, pattern, strlen(pattern))) - return true; - } - return false; -} - -static uint64_t check_huge(void *addr) -{ - uint64_t thp = 0; - int ret; - FILE *fp; - char buffer[MAX_LINE_LENGTH]; - char addr_pattern[MAX_LINE_LENGTH]; - - ret = snprintf(addr_pattern, MAX_LINE_LENGTH, "%08lx-", - (unsigned long) addr); - if (ret >= MAX_LINE_LENGTH) { - printf("%s: Pattern is too long\n", __func__); - exit(EXIT_FAILURE); - } - - - fp = fopen(SMAP_PATH, "r"); - if (!fp) { - printf("%s: Failed to open file %s\n", __func__, SMAP_PATH); - exit(EXIT_FAILURE); - } - if (!check_for_pattern(fp, addr_pattern, buffer)) - goto err_out; - - /* - * Fetch the AnonHugePages: in the same block and check the number of - * hugepages. - */ - if (!check_for_pattern(fp, "AnonHugePages:", buffer)) - goto err_out; - - if (sscanf(buffer, "AnonHugePages:%10ld kB", &thp) != 1) { - printf("Reading smap error\n"); - exit(EXIT_FAILURE); - } - -err_out: - fclose(fp); - return thp; -} - void split_pmd_thp(void) { char *one_page; diff --git a/tools/testing/selftests/vm/vm_util.c b/tools/testing/selftests/vm/vm_util.c new file mode 100644 index 0000000000000..b58ab11a7a302 --- /dev/null +++ b/tools/testing/selftests/vm/vm_util.c @@ -0,0 +1,108 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <string.h> +#include <fcntl.h> +#include "../kselftest.h" +#include "vm_util.h" + +#define PMD_SIZE_FILE_PATH "/sys/kernel/mm/transparent_hugepage/hpage_pmd_size" +#define SMAP_FILE_PATH "/proc/self/smaps" +#define MAX_LINE_LENGTH 500 + +uint64_t pagemap_get_entry(int fd, char *start) +{ + const unsigned long pfn = (unsigned long)start / getpagesize(); + uint64_t entry; + int ret; + + ret = pread(fd, &entry, sizeof(entry), pfn * sizeof(entry)); + if (ret != sizeof(entry)) + ksft_exit_fail_msg("reading pagemap failed\n"); + return entry; +} + +bool pagemap_is_softdirty(int fd, char *start) +{ + uint64_t entry = pagemap_get_entry(fd, start); + + // Check if dirty bit (55th bit) is set + return entry & 0x0080000000000000ull; +} + +void clear_softdirty(void) +{ + int ret; + const char *ctrl = "4"; + int fd = open("/proc/self/clear_refs", O_WRONLY); + + if (fd < 0) + ksft_exit_fail_msg("opening clear_refs failed\n"); + ret = write(fd, ctrl, strlen(ctrl)); + close(fd); + if (ret != strlen(ctrl)) + ksft_exit_fail_msg("writing clear_refs failed\n"); +} + +static bool check_for_pattern(FILE *fp, const char *pattern, char *buf) +{ + while (fgets(buf, MAX_LINE_LENGTH, fp) != NULL) { + if (!strncmp(buf, pattern, strlen(pattern))) + return true; + } + return false; +} + +uint64_t read_pmd_pagesize(void) +{ + int fd; + char buf[20]; + ssize_t num_read; + + fd = open(PMD_SIZE_FILE_PATH, O_RDONLY); + if (fd == -1) + ksft_exit_fail_msg("Open hpage_pmd_size failed\n"); + + num_read = read(fd, buf, 19); + if (num_read < 1) { + close(fd); + ksft_exit_fail_msg("Read hpage_pmd_size failed\n"); + } + buf[num_read] = '\0'; + close(fd); + + return strtoul(buf, NULL, 10); +} + +uint64_t check_huge(void *addr) +{ + uint64_t thp = 0; + int ret; + FILE *fp; + char buffer[MAX_LINE_LENGTH]; + char addr_pattern[MAX_LINE_LENGTH]; + + ret = snprintf(addr_pattern, MAX_LINE_LENGTH, "%08lx-", + (unsigned long) addr); + if (ret >= MAX_LINE_LENGTH) + ksft_exit_fail_msg("%s: Pattern is too long\n", __func__); + + fp = fopen(SMAP_FILE_PATH, "r"); + if (!fp) + ksft_exit_fail_msg("%s: Failed to open file %s\n", __func__, SMAP_FILE_PATH); + + if (!check_for_pattern(fp, addr_pattern, buffer)) + goto err_out; + + /* + * Fetch the AnonHugePages: in the same block and check the number of + * hugepages. + */ + if (!check_for_pattern(fp, "AnonHugePages:", buffer)) + goto err_out; + + if (sscanf(buffer, "AnonHugePages:%10ld kB", &thp) != 1) + ksft_exit_fail_msg("Reading smap error\n"); + +err_out: + fclose(fp); + return thp; +} diff --git a/tools/testing/selftests/vm/vm_util.h b/tools/testing/selftests/vm/vm_util.h new file mode 100644 index 0000000000000..2e512bd57ae14 --- /dev/null +++ b/tools/testing/selftests/vm/vm_util.h @@ -0,0 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#include <stdint.h> +#include <stdbool.h> + +uint64_t pagemap_get_entry(int fd, char *start); +bool pagemap_is_softdirty(int fd, char *start); +void clear_softdirty(void); +uint64_t read_pmd_pagesize(void); +uint64_t check_huge(void *addr); -- 2.30.2

1 year, 2 months

3
6
0 0

[PATCH RESEND v2 1/2] mm: drop oom code from exit_mmap

by Suren Baghdasaryan

The primary reason to invoke the oom reaper from the exit_mmap path used to be a prevention of an excessive oom killing if the oom victim exit races with the oom reaper (see [1] for more details). The invocation has moved around since then because of the interaction with the munlock logic but the underlying reason has remained the same (see [2]). Munlock code is no longer a problem since [3] and there shouldn't be any blocking operation before the memory is unmapped by exit_mmap so the oom reaper invocation can be dropped. The unmapping part can be done with the non-exclusive mmap_sem and the exclusive one is only required when page tables are freed. Remove the oom_reaper from exit_mmap which will make the code easier to read. This is really unlikely to make any observable difference although some microbenchmarks could benefit from one less branch that needs to be evaluated even though it almost never is true. [1] 212925802454 ("mm: oom: let oom_reap_task and exit_mmap run concurrently") [2] 27ae357fa82b ("mm, oom: fix concurrent munlock and oom reaper unmap, v3") [3] a213e5cf71cb ("mm/munlock: delete munlock_vma_pages_all(), allow oomreap") Signed-off-by: Suren Baghdasaryan <surenb(a)google.com> Acked-by: Michal Hocko <mhocko(a)suse.com> --- Notes: - Rebased over git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm mm-unstable branch per Andrew's request but applies cleany to Linus' ToT - Conflicts with maple-tree patchset. Resolving these was discussed in https://lore.kernel.org/all/20220519223438.qx35hbpfnnfnpouw@revolver/ include/linux/oom.h | 2 -- mm/mmap.c | 31 ++++++++++++------------------- mm/oom_kill.c | 2 +- 3 files changed, 13 insertions(+), 22 deletions(-) diff --git a/include/linux/oom.h b/include/linux/oom.h index 02d1e7bbd8cd..6cdde62b078b 100644 --- a/include/linux/oom.h +++ b/include/linux/oom.h @@ -106,8 +106,6 @@ static inline vm_fault_t check_stable_address_space(struct mm_struct *mm) return 0; } -bool __oom_reap_task_mm(struct mm_struct *mm); - long oom_badness(struct task_struct *p, unsigned long totalpages); diff --git a/mm/mmap.c b/mm/mmap.c index 2b9305ed0dda..b7918e6bb0db 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -3110,30 +3110,13 @@ void exit_mmap(struct mm_struct *mm) /* mm's last user has gone, and its about to be pulled down */ mmu_notifier_release(mm); - if (unlikely(mm_is_oom_victim(mm))) { - /* - * Manually reap the mm to free as much memory as possible. - * Then, as the oom reaper does, set MMF_OOM_SKIP to disregard - * this mm from further consideration. Taking mm->mmap_lock for - * write after setting MMF_OOM_SKIP will guarantee that the oom - * reaper will not run on this mm again after mmap_lock is - * dropped. - * - * Nothing can be holding mm->mmap_lock here and the above call - * to mmu_notifier_release(mm) ensures mmu notifier callbacks in - * __oom_reap_task_mm() will not block. - */ - (void)__oom_reap_task_mm(mm); - set_bit(MMF_OOM_SKIP, &mm->flags); - } - - mmap_write_lock(mm); + mmap_read_lock(mm); arch_exit_mmap(mm); vma = mm->mmap; if (!vma) { /* Can happen if dup_mmap() received an OOM */ - mmap_write_unlock(mm); + mmap_read_unlock(mm); return; } @@ -3143,6 +3126,16 @@ void exit_mmap(struct mm_struct *mm) /* update_hiwater_rss(mm) here? but nobody should be looking */ /* Use -1 here to ensure all VMAs in the mm are unmapped */ unmap_vmas(&tlb, vma, 0, -1); + mmap_read_unlock(mm); + + /* + * Set MMF_OOM_SKIP to hide this task from the oom killer/reaper + * because the memory has been already freed. Do not bother checking + * mm_is_oom_victim because setting a bit unconditionally is cheaper. + */ + set_bit(MMF_OOM_SKIP, &mm->flags); + + mmap_write_lock(mm); free_pgtables(&tlb, vma, FIRST_USER_ADDRESS, USER_PGTABLES_CEILING); tlb_finish_mmu(&tlb); diff --git a/mm/oom_kill.c b/mm/oom_kill.c index 8a70bca67c94..98dca2b42357 100644 --- a/mm/oom_kill.c +++ b/mm/oom_kill.c @@ -538,7 +538,7 @@ static DECLARE_WAIT_QUEUE_HEAD(oom_reaper_wait); static struct task_struct *oom_reaper_list; static DEFINE_SPINLOCK(oom_reaper_lock); -bool __oom_reap_task_mm(struct mm_struct *mm) +static bool __oom_reap_task_mm(struct mm_struct *mm) { struct vm_area_struct *vma; bool ret = true; -- 2.36.1.255.ge46751e96f-goog

1 year, 3 months

6
19
0 0

[PATCH bpf-next v5 0/6] bpf trampoline for arm64

by Xu Kuohai

Add bpf trampoline support for arm64. Most of the logic is the same as x86. Tested on raspberry pi 4b and qemu with KASLR disabled (avoid long jump), result: #9 /1 bpf_cookie/kprobe:OK #9 /2 bpf_cookie/multi_kprobe_link_api:FAIL #9 /3 bpf_cookie/multi_kprobe_attach_api:FAIL #9 /4 bpf_cookie/uprobe:OK #9 /5 bpf_cookie/tracepoint:OK #9 /6 bpf_cookie/perf_event:OK #9 /7 bpf_cookie/trampoline:OK #9 /8 bpf_cookie/lsm:OK #9 bpf_cookie:FAIL #18 /1 bpf_tcp_ca/dctcp:OK #18 /2 bpf_tcp_ca/cubic:OK #18 /3 bpf_tcp_ca/invalid_license:OK #18 /4 bpf_tcp_ca/dctcp_fallback:OK #18 /5 bpf_tcp_ca/rel_setsockopt:OK #18 bpf_tcp_ca:OK #51 /1 dummy_st_ops/dummy_st_ops_attach:OK #51 /2 dummy_st_ops/dummy_init_ret_value:OK #51 /3 dummy_st_ops/dummy_init_ptr_arg:OK #51 /4 dummy_st_ops/dummy_multiple_args:OK #51 dummy_st_ops:OK #55 fentry_fexit:OK #56 fentry_test:OK #57 /1 fexit_bpf2bpf/target_no_callees:OK #57 /2 fexit_bpf2bpf/target_yes_callees:OK #57 /3 fexit_bpf2bpf/func_replace:OK #57 /4 fexit_bpf2bpf/func_replace_verify:OK #57 /5 fexit_bpf2bpf/func_sockmap_update:OK #57 /6 fexit_bpf2bpf/func_replace_return_code:OK #57 /7 fexit_bpf2bpf/func_map_prog_compatibility:OK #57 /8 fexit_bpf2bpf/func_replace_multi:OK #57 /9 fexit_bpf2bpf/fmod_ret_freplace:OK #57 fexit_bpf2bpf:OK #58 fexit_sleep:OK #59 fexit_stress:OK #60 fexit_test:OK #67 get_func_args_test:OK #68 get_func_ip_test:OK #104 modify_return:OK #237 xdp_bpf2bpf:OK bpf_cookie/multi_kprobe_link_api and bpf_cookie/multi_kprobe_attach_api failed due to lack of multi_kprobe on arm64. v5: - As Alexei suggested, remove is_valid_bpf_tramp_flags() v4: https://lore.kernel.org/bpf/20220517071838.3366093-1-xukuohai@huawei.com/ - Run the test cases on raspberry pi 4b - Rebase and add cookie to trampoline - As Steve suggested, move trace_direct_tramp() back to entry-ftrace.S to avoid messing up generic code with architecture specific code - As Jakub suggested, merge patch 4 and patch 5 of v3 to provide full function in one patch - As Mark suggested, add a comment for the use of aarch64_insn_patch_text_nosync() - Do not generate trampoline for long jump to avoid triggering ftrace_bug - Round stack size to multiples of 16B to avoid SPAlignmentFault - Use callee saved register x20 to reduce the use of mov_i64 - Add missing BTI J instructions - Trivial spelling and code style fixes v3: https://lore.kernel.org/bpf/20220424154028.1698685-1-xukuohai@huawei.com/ - Append test results for bpf_tcp_ca, dummy_st_ops, fexit_bpf2bpf, xdp_bpf2bpf - Support to poke bpf progs - Fix return value of arch_prepare_bpf_trampoline() to the total number of bytes instead of number of instructions - Do not check whether CONFIG_DYNAMIC_FTRACE_WITH_REGS is enabled in arch_prepare_bpf_trampoline, since the trampoline may be hooked to a bpf prog - Restrict bpf_arch_text_poke() to poke bpf text only, as kernel functions are poked by ftrace - Rewrite trace_direct_tramp() in inline assembly in trace_selftest.c to avoid messing entry-ftrace.S - isolate arch_ftrace_set_direct_caller() with macro CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS to avoid compile error when this macro is disabled - Some trivial code sytle fixes v2: https://lore.kernel.org/bpf/20220414162220.1985095-1-xukuohai@huawei.com/ - Add Song's ACK - Change the multi-line comment in is_valid_bpf_tramp_flags() into net style (patch 3) - Fix a deadloop issue in ftrace selftest (patch 2) - Replace pt_regs->x0 with pt_regs->orig_x0 in patch 1 commit message - Replace "bpf trampoline" with "custom trampoline" in patch 1, as ftrace direct call is not only used by bpf trampoline. v1: https://lore.kernel.org/bpf/20220413054959.1053668-1-xukuohai@huawei.com/ Xu Kuohai (6): arm64: ftrace: Add ftrace direct call support ftrace: Fix deadloop caused by direct call in ftrace selftest bpf: Remove is_valid_bpf_tramp_flags() bpf, arm64: Impelment bpf_arch_text_poke() for arm64 bpf, arm64: bpf trampoline for arm64 selftests/bpf: Fix trivial typo in fentry_fexit.c arch/arm64/Kconfig | 2 + arch/arm64/include/asm/ftrace.h | 22 + arch/arm64/kernel/asm-offsets.c | 1 + arch/arm64/kernel/entry-ftrace.S | 28 +- arch/arm64/net/bpf_jit.h | 1 + arch/arm64/net/bpf_jit_comp.c | 523 +++++++++++++++++- arch/x86/net/bpf_jit_comp.c | 20 - kernel/bpf/bpf_struct_ops.c | 3 + kernel/bpf/trampoline.c | 3 + kernel/trace/trace_selftest.c | 2 + .../selftests/bpf/prog_tests/fentry_fexit.c | 4 +- 11 files changed, 570 insertions(+), 39 deletions(-) -- 2.30.2

1 year, 4 months

5
29
0 0

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror June 2022