January 2024 - Linux-kselftest-mirror

by Sagi Shahar

Hello, This is v4 of the patch series for TDX selftests. It has been updated for Intel’s v17 of the TDX host patches which was proposed here: https://lore.kernel.org/all/cover.1699368322.git.isaku.yamahata@intel.com/ The tree can be found at: https://github.com/googleprodkernel/linux-cc/tree/tdx-selftests-rfc-v5 Changes from RFC v4: Added patch to propagate KVM_EXIT_MEMORY_FAULT to userspace. Minor tweaks to align the tests to the new TDX 1.5 spec such as changes in the expected values in TDG.VP.INFO. In RFCv5, TDX selftest code is organized into: + headers in tools/testing/selftests/kvm/include/x86_64/tdx/ + common code in tools/testing/selftests/kvm/lib/x86_64/tdx/ + selftests in tools/testing/selftests/kvm/x86_64/tdx_* Dependencies + Peter’s patches, which provide functions for the host to allocate and track protected memory in the guest. https://lore.kernel.org/all/20230110175057.715453-1-pgonda@google.com/ Further work for this patch series/TODOs + Sean’s comments for the non-confidential UPM selftests patch series at https://lore.kernel.org/lkml/Y8dC8WDwEmYixJqt@google.com/T/#u apply here as well + Add ucall support for TDX selftests I would also like to acknowledge the following people, who helped review or test patches in previous versions: + Sean Christopherson <seanjc(a)google.com> + Zhenzhong Duan <zhenzhong.duan(a)intel.com> + Peter Gonda <pgonda(a)google.com> + Andrew Jones <drjones(a)redhat.com> + Maxim Levitsky <mlevitsk(a)redhat.com> + Xiaoyao Li <xiaoyao.li(a)intel.com> + David Matlack <dmatlack(a)google.com> + Marc Orr <marcorr(a)google.com> + Isaku Yamahata <isaku.yamahata(a)gmail.com> + Maciej S. Szmigiero <maciej.szmigiero(a)oracle.com> Links to earlier patch series + RFC v1: https://lore.kernel.org/lkml/20210726183816.1343022-1-erdemaktas@google.com… + RFC v2: https://lore.kernel.org/lkml/20220830222000.709028-1-sagis@google.com/T/#u + RFC v3: https://lore.kernel.org/lkml/20230121001542.2472357-1-ackerleytng@google.co… + RFC v4: https://lore.kernel.org/lkml/20230725220132.2310657-1-afranji@google.com/ *** BLURB HERE *** Ackerley Tng (12): KVM: selftests: Add function to allow one-to-one GVA to GPA mappings KVM: selftests: Expose function that sets up sregs based on VM's mode KVM: selftests: Store initial stack address in struct kvm_vcpu KVM: selftests: Refactor steps in vCPU descriptor table initialization KVM: selftests: TDX: Use KVM_TDX_CAPABILITIES to validate TDs' attribute configuration KVM: selftests: TDX: Update load_td_memory_region for VM memory backed by guest memfd KVM: selftests: Add functions to allow mapping as shared KVM: selftests: Expose _vm_vaddr_alloc KVM: selftests: TDX: Add support for TDG.MEM.PAGE.ACCEPT KVM: selftests: TDX: Add support for TDG.VP.VEINFO.GET KVM: selftests: TDX: Add TDX UPM selftest KVM: selftests: TDX: Add TDX UPM selftests for implicit conversion Erdem Aktas (3): KVM: selftests: Add helper functions to create TDX VMs KVM: selftests: TDX: Add TDX lifecycle test KVM: selftests: TDX: Adding test case for TDX port IO Roger Wang (1): KVM: selftests: TDX: Add TDG.VP.INFO test Ryan Afranji (2): KVM: selftests: TDX: Verify the behavior when host consumes a TD private memory KVM: selftests: TDX: Add shared memory test Sagi Shahar (11): KVM: selftests: TDX: Add report_fatal_error test KVM: selftests: TDX: Add basic TDX CPUID test KVM: selftests: TDX: Add basic get_td_vmcall_info test KVM: selftests: TDX: Add TDX IO writes test KVM: selftests: TDX: Add TDX IO reads test KVM: selftests: TDX: Add TDX MSR read/write tests KVM: selftests: TDX: Add TDX HLT exit test KVM: selftests: TDX: Add TDX MMIO reads test KVM: selftests: TDX: Add TDX MMIO writes test KVM: selftests: TDX: Add TDX CPUID TDVMCALL test KVM: selftests: Propagate KVM_EXIT_MEMORY_FAULT to userspace tools/testing/selftests/kvm/Makefile | 8 + .../selftests/kvm/include/kvm_util_base.h | 30 + .../selftests/kvm/include/x86_64/processor.h | 4 + .../kvm/include/x86_64/tdx/td_boot.h | 82 + .../kvm/include/x86_64/tdx/td_boot_asm.h | 16 + .../selftests/kvm/include/x86_64/tdx/tdcall.h | 59 + .../selftests/kvm/include/x86_64/tdx/tdx.h | 65 + .../kvm/include/x86_64/tdx/tdx_util.h | 19 + .../kvm/include/x86_64/tdx/test_util.h | 164 ++ tools/testing/selftests/kvm/lib/kvm_util.c | 101 +- .../selftests/kvm/lib/x86_64/processor.c | 77 +- .../selftests/kvm/lib/x86_64/tdx/td_boot.S | 101 ++ .../selftests/kvm/lib/x86_64/tdx/tdcall.S | 158 ++ .../selftests/kvm/lib/x86_64/tdx/tdx.c | 262 ++++ .../selftests/kvm/lib/x86_64/tdx/tdx_util.c | 558 +++++++ .../selftests/kvm/lib/x86_64/tdx/test_util.c | 101 ++ .../kvm/x86_64/tdx_shared_mem_test.c | 135 ++ .../selftests/kvm/x86_64/tdx_upm_test.c | 469 ++++++ .../selftests/kvm/x86_64/tdx_vm_tests.c | 1319 +++++++++++++++++ 19 files changed, 3693 insertions(+), 35 deletions(-) create mode 100644 tools/testing/selftests/kvm/include/x86_64/tdx/td_boot.h create mode 100644 tools/testing/selftests/kvm/include/x86_64/tdx/td_boot_asm.h create mode 100644 tools/testing/selftests/kvm/include/x86_64/tdx/tdcall.h create mode 100644 tools/testing/selftests/kvm/include/x86_64/tdx/tdx.h create mode 100644 tools/testing/selftests/kvm/include/x86_64/tdx/tdx_util.h create mode 100644 tools/testing/selftests/kvm/include/x86_64/tdx/test_util.h create mode 100644 tools/testing/selftests/kvm/lib/x86_64/tdx/td_boot.S create mode 100644 tools/testing/selftests/kvm/lib/x86_64/tdx/tdcall.S create mode 100644 tools/testing/selftests/kvm/lib/x86_64/tdx/tdx.c create mode 100644 tools/testing/selftests/kvm/lib/x86_64/tdx/tdx_util.c create mode 100644 tools/testing/selftests/kvm/lib/x86_64/tdx/test_util.c create mode 100644 tools/testing/selftests/kvm/x86_64/tdx_shared_mem_test.c create mode 100644 tools/testing/selftests/kvm/x86_64/tdx_upm_test.c create mode 100644 tools/testing/selftests/kvm/x86_64/tdx_vm_tests.c -- 2.43.0.472.g3155946c3a-goog

4 days, 15 hours

8
84
0 0

[PATCH v6 1/2] posix-timers: Prefer delivery of signals to the current thread

by Marco Elver

From: Dmitry Vyukov <dvyukov(a)google.com> POSIX timers using the CLOCK_PROCESS_CPUTIME_ID clock prefer the main thread of a thread group for signal delivery. However, this has a significant downside: it requires waking up a potentially idle thread. Instead, prefer to deliver signals to the current thread (in the same thread group) if SIGEV_THREAD_ID is not set by the user. This does not change guaranteed semantics, since POSIX process CPU time timers have never guaranteed that signal delivery is to a specific thread (without SIGEV_THREAD_ID set). The effect is that we no longer wake up potentially idle threads, and the kernel is no longer biased towards delivering the timer signal to any particular thread (which better distributes the timer signals esp. when multiple timers fire concurrently). Signed-off-by: Dmitry Vyukov <dvyukov(a)google.com> Suggested-by: Oleg Nesterov <oleg(a)redhat.com> Reviewed-by: Oleg Nesterov <oleg(a)redhat.com> Signed-off-by: Marco Elver <elver(a)google.com> --- v6: - Split test from this patch. - Update wording on what this patch aims to improve. v5: - Rebased onto v6.2. v4: - Restructured checks in send_sigqueue() as suggested. v3: - Switched to the completely different implementation (much simpler) based on the Oleg's idea. RFC v2: - Added additional Cc as Thomas asked. --- kernel/signal.c | 25 ++++++++++++++++++++++--- 1 file changed, 22 insertions(+), 3 deletions(-) diff --git a/kernel/signal.c b/kernel/signal.c index 8cb28f1df294..605445fa27d4 100644 --- a/kernel/signal.c +++ b/kernel/signal.c @@ -1003,8 +1003,7 @@ static void complete_signal(int sig, struct task_struct *p, enum pid_type type) /* * Now find a thread we can wake up to take the signal off the queue. * - * If the main thread wants the signal, it gets first crack. - * Probably the least surprising to the average bear. + * Try the suggested task first (may or may not be the main thread). */ if (wants_signal(sig, p)) t = p; @@ -1970,8 +1969,23 @@ int send_sigqueue(struct sigqueue *q, struct pid *pid, enum pid_type type) ret = -1; rcu_read_lock(); + /* + * This function is used by POSIX timers to deliver a timer signal. + * Where type is PIDTYPE_PID (such as for timers with SIGEV_THREAD_ID + * set), the signal must be delivered to the specific thread (queues + * into t->pending). + * + * Where type is not PIDTYPE_PID, signals must just be delivered to the + * current process. In this case, prefer to deliver to current if it is + * in the same thread group as the target, as it avoids unnecessarily + * waking up a potentially idle task. + */ t = pid_task(pid, type); - if (!t || !likely(lock_task_sighand(t, &flags))) + if (!t) + goto ret; + if (type != PIDTYPE_PID && same_thread_group(t, current)) + t = current; + if (!likely(lock_task_sighand(t, &flags))) goto ret; ret = 1; /* the signal is ignored */ @@ -1993,6 +2007,11 @@ int send_sigqueue(struct sigqueue *q, struct pid *pid, enum pid_type type) q->info.si_overrun = 0; signalfd_notify(t, sig); + /* + * If the type is not PIDTYPE_PID, we just use shared_pending, which + * won't guarantee that the specified task will receive the signal, but + * is sufficient if t==current in the common case. + */ pending = (type != PIDTYPE_PID) ? &t->signal->shared_pending : &t->pending; list_add_tail(&q->list, &pending->list); sigaddset(&pending->signal, sig); -- 2.40.0.rc1.284.g88254d51c5-goog

1 week, 6 days

9
50
0 0

[PATCH v3] selftests/ftrace: traceonoff_triggers: strip off names

by Yipeng Zou

The func_traceonoff_triggers.tc sometimes goes to fail on my board, Kunpeng-920. [root@localhost]# ./ftracetest ./test.d/ftrace/func_traceonoff_triggers.tc -l fail.log === Ftrace unit tests === [1] ftrace - test for function traceon/off triggers [FAIL] [2] (instance) ftrace - test for function traceon/off triggers [UNSUPPORTED] I look up the log, and it shows that the md5sum is different between csum1 and csum2. ++ cnt=611 ++ sleep .1 +++ cnt_trace +++ grep -v '^#' trace +++ wc -l ++ cnt2=611 ++ '[' 611 -ne 611 ']' +++ cat tracing_on ++ on=0 ++ '[' 0 '!=' 0 ']' +++ md5sum trace ++ csum1='76896aa74362fff66a6a5f3cf8a8a500 trace' ++ sleep .1 +++ md5sum trace ++ csum2='ee8625a21c058818fc26e45c1ed3f6de trace' ++ '[' '76896aa74362fff66a6a5f3cf8a8a500 trace' '!=' 'ee8625a21c058818fc26e45c1ed3f6de trace' ']' ++ fail 'Tracing file is still changing' ++ echo Tracing file is still changing Tracing file is still changing ++ exit_fail ++ exit 1 So I directly dump the trace file before md5sum, the diff shows that: [root@localhost]# diff trace_1.log trace_2.log -y --suppress-common-lines dockerd-12285 [036] d.... 18385.510290: sched_stat | <...>-12285 [036] d.... 18385.510290: sched_stat dockerd-12285 [036] d.... 18385.510291: sched_swit | <...>-12285 [036] d.... 18385.510291: sched_swit <...>-740 [044] d.... 18385.602859: sched_stat | kworker/44:1-740 [044] d.... 18385.602859: sched_stat <...>-740 [044] d.... 18385.602860: sched_swit | kworker/44:1-740 [044] d.... 18385.602860: sched_swit And we can see that <...> filed be filled with names. We can strip off the names there to fix that. After strip off the names: kworker/u257:0-12 [019] d..2. 2528.758910: sched_stat | -12 [019] d..2. 2528.758910: sched_stat_runtime: comm=k kworker/u257:0-12 [019] d..2. 2528.758912: sched_swit | -12 [019] d..2. 2528.758912: sched_switch: prev_comm=kw <idle>-0 [000] d.s5. 2528.762318: sched_waki | -0 [000] d.s5. 2528.762318: sched_waking: comm=sshd pi <idle>-0 [037] dNh2. 2528.762326: sched_wake | -0 [037] dNh2. 2528.762326: sched_wakeup: comm=sshd pi <idle>-0 [037] d..2. 2528.762334: sched_swit | -0 [037] d..2. 2528.762334: sched_switch: prev_comm=sw Fixes: d87b29179aa0 ("selftests: ftrace: Use md5sum to take less time of checking logs") Suggested-by: Steven Rostedt (Google) <rostedt(a)goodmis.org> Signed-off-by: Yipeng Zou <zouyipeng(a)huawei.com> Acked-by: Masami Hiramatsu (Google) <mhiramat(a)kernel.org> Reviewed-by: Steven Rostedt (Google) <rostedt(a)goodmis.org> --- .../ftrace/test.d/ftrace/func_traceonoff_triggers.tc | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/func_traceonoff_triggers.tc b/tools/testing/selftests/ftrace/test.d/ftrace/func_traceonoff_triggers.tc index aee22289536b..1b57771dbfdf 100644 --- a/tools/testing/selftests/ftrace/test.d/ftrace/func_traceonoff_triggers.tc +++ b/tools/testing/selftests/ftrace/test.d/ftrace/func_traceonoff_triggers.tc @@ -90,9 +90,10 @@ if [ $on != "0" ]; then fail "Tracing is not off" fi -csum1=`md5sum trace` +# Cannot rely on names being around as they are only cached, strip them +csum1=`cat trace | sed -e 's/^ *[^ ]*$-[0-9][0-9]*$/\1/' | md5sum` sleep $SLEEP_TIME -csum2=`md5sum trace` +csum2=`cat trace | sed -e 's/^ *[^ ]*$-[0-9][0-9]*$/\1/' | md5sum` if [ "$csum1" != "$csum2" ]; then fail "Tracing file is still changing" -- 2.34.1

2 weeks

2
2
0 0

[PATCH v2] selftests: sud_test: return correct emulated syscall value on RISC-V

by Clément Léger

Currently, the sud_test expects the emulated syscall to return the emulated syscall number. This assumption only works on architectures were the syscall calling convention use the same register for syscall number/syscall return value. This is not the case for RISC-V and thus the return value must be also emulated using the provided ucontext. Signed-off-by: Clément Léger <cleger(a)rivosinc.com> Reviewed-by: Palmer Dabbelt <palmer(a)rivosinc.com> Acked-by: Palmer Dabbelt <palmer(a)rivosinc.com> --- Changes in V2: - Changes comment to be more explicit - Use A7 syscall arg rather than hardcoding MAGIC_SYSCALL_1 --- .../selftests/syscall_user_dispatch/sud_test.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/tools/testing/selftests/syscall_user_dispatch/sud_test.c b/tools/testing/selftests/syscall_user_dispatch/sud_test.c index b5d592d4099e..d975a6767329 100644 --- a/tools/testing/selftests/syscall_user_dispatch/sud_test.c +++ b/tools/testing/selftests/syscall_user_dispatch/sud_test.c @@ -158,6 +158,20 @@ static void handle_sigsys(int sig, siginfo_t *info, void *ucontext) /* In preparation for sigreturn. */ SYSCALL_DISPATCH_OFF(glob_sel); + + /* + * The tests for argument handling assume that `syscall(x) == x`. This + * is a NOP on x86 because the syscall number is passed in %rax, which + * happens to also be the function ABI return register. Other + * architectures may need to swizzle the arguments around. + */ +#if defined(__riscv) +/* REG_A7 is not defined in libc headers */ +# define REG_A7 (REG_A0 + 7) + + ((ucontext_t *)ucontext)->uc_mcontext.__gregs[REG_A0] = + ((ucontext_t *)ucontext)->uc_mcontext.__gregs[REG_A7]; +#endif } TEST(dispatch_and_return) -- 2.43.0

2 weeks, 2 days

3
2
0 0

[PATCH] KVM: selftests: Use TAP in the steal_time test

by Thomas Huth

For easier use of the tests in automation and for having some status information for the user while the test is running, let's provide some TAP output in this test. Signed-off-by: Thomas Huth <thuth(a)redhat.com> --- NB: This patch does not use the interface from kselftest_harness.h since it is not very suitable for the for-loop in this patch. tools/testing/selftests/kvm/steal_time.c | 46 ++++++++++++------------ 1 file changed, 23 insertions(+), 23 deletions(-) diff --git a/tools/testing/selftests/kvm/steal_time.c b/tools/testing/selftests/kvm/steal_time.c index 171adfb2a6cb..aa6149eb9ea1 100644 --- a/tools/testing/selftests/kvm/steal_time.c +++ b/tools/testing/selftests/kvm/steal_time.c @@ -81,20 +81,18 @@ static void steal_time_init(struct kvm_vcpu *vcpu, uint32_t i) static void steal_time_dump(struct kvm_vm *vm, uint32_t vcpu_idx) { struct kvm_steal_time *st = addr_gva2hva(vm, (ulong)st_gva[vcpu_idx]); - int i; - pr_info("VCPU%d:\n", vcpu_idx); - pr_info(" steal: %lld\n", st->steal); - pr_info(" version: %d\n", st->version); - pr_info(" flags: %d\n", st->flags); - pr_info(" preempted: %d\n", st->preempted); - pr_info(" u8_pad: "); - for (i = 0; i < 3; ++i) - pr_info("%d", st->u8_pad[i]); - pr_info("\n pad: "); - for (i = 0; i < 11; ++i) - pr_info("%d", st->pad[i]); - pr_info("\n"); + ksft_print_msg("VCPU%d:\n", vcpu_idx); + ksft_print_msg(" steal: %lld\n", st->steal); + ksft_print_msg(" version: %d\n", st->version); + ksft_print_msg(" flags: %d\n", st->flags); + ksft_print_msg(" preempted: %d\n", st->preempted); + ksft_print_msg(" u8_pad: %d %d %d\n", + st->u8_pad[0], st->u8_pad[1], st->u8_pad[2]); + ksft_print_msg(" pad: %d %d %d %d %d %d %d %d %d %d %d\n", + st->pad[0], st->pad[1], st->pad[2], st->pad[3], + st->pad[4], st->pad[5], st->pad[6], st->pad[7], + st->pad[8], st->pad[9], st->pad[10]); } #elif defined(__aarch64__) @@ -197,10 +195,10 @@ static void steal_time_dump(struct kvm_vm *vm, uint32_t vcpu_idx) { struct st_time *st = addr_gva2hva(vm, (ulong)st_gva[vcpu_idx]); - pr_info("VCPU%d:\n", vcpu_idx); - pr_info(" rev: %d\n", st->rev); - pr_info(" attr: %d\n", st->attr); - pr_info(" st_time: %ld\n", st->st_time); + ksft_print_msg("VCPU%d:\n", vcpu_idx); + ksft_print_msg(" rev: %d\n", st->rev); + ksft_print_msg(" attr: %d\n", st->attr); + ksft_print_msg(" st_time: %ld\n", st->st_time); } #endif @@ -267,7 +265,9 @@ int main(int ac, char **av) vm_userspace_mem_region_add(vm, VM_MEM_SRC_ANONYMOUS, ST_GPA_BASE, 1, gpages, 0); virt_map(vm, ST_GPA_BASE, ST_GPA_BASE, gpages); + ksft_print_header(); TEST_REQUIRE(is_steal_time_supported(vcpus[0])); + ksft_set_plan(NR_VCPUS); /* Run test on each VCPU */ for (i = 0; i < NR_VCPUS; ++i) { @@ -308,14 +308,14 @@ int main(int ac, char **av) run_delay, stolen_time); if (verbose) { - pr_info("VCPU%d: total-stolen-time=%ld test-stolen-time=%ld", i, - guest_stolen_time[i], stolen_time); - if (stolen_time == run_delay) - pr_info(" (BONUS: guest test-stolen-time even exactly matches test-run_delay)"); - pr_info("\n"); + ksft_print_msg("VCPU%d: total-stolen-time=%ld test-stolen-time=%ld%s\n", + i, guest_stolen_time[i], stolen_time, + stolen_time == run_delay ? + " (BONUS: guest test-stolen-time even exactly matches test-run_delay)" : ""); steal_time_dump(vm, i); } + ksft_test_result_pass("vcpu%d\n", i); } - return 0; + ksft_finished(); /* Print results and exit() accordingly */ } -- 2.41.0

2 weeks, 3 days

5
6
0 0

[PATCH 1/1] KVM: selftests: add kvmclock drift test

by Dongli Zhang

There is kvmclock drift issue during the vCPU hotplug. It has been fixed by the commit c52ffadc65e2 ("KVM: x86: Don't unnecessarily force masterclock update on vCPU hotplug"). This is to add the test to verify if the master clock is updated when we write 0 to MSR_IA32_TSC from the host side. Here is the usage example on the KVM with the bugfix reverted. $ ./kvm_clock_drift -v -p 5 kvmclock based on old pvclock_vcpu_time_info: 5012221999 version: 2 tsc_timestamp: 3277968 system_time: 11849519 tsc_to_system_mul: 2152530255 tsc_shift: 0 flags: 1 kvmclock based on new pvclock_vcpu_time_info: 5012222411 version: 4 tsc_timestamp: 9980576184 system_time: 5012222411 tsc_to_system_mul: 2152530255 tsc_shift: 0 flags: 1 ==== Test Assertion Failure ==== x86_64/kvm_clock_drift.c:216: clock_old == clock_new pid=14257 tid=14257 errno=4 - Interrupted system call 1 0x000000000040277b: main at kvm_clock_drift.c:216 2 0x00007f7766fa7e44: ?? ??:0 3 0x000000000040286d: _start at ??:? kvmclock drift detected, old=5012221999, new=5012222411 Signed-off-by: Dongli Zhang <dongli.zhang(a)oracle.com> --- tools/testing/selftests/kvm/Makefile | 1 + .../selftests/kvm/x86_64/kvm_clock_drift.c | 223 ++++++++++++++++++ 2 files changed, 224 insertions(+) create mode 100644 tools/testing/selftests/kvm/x86_64/kvm_clock_drift.c diff --git a/tools/testing/selftests/kvm/Makefile b/tools/testing/selftests/kvm/Makefile index 4412b42d95de..c665d0d8d348 100644 --- a/tools/testing/selftests/kvm/Makefile +++ b/tools/testing/selftests/kvm/Makefile @@ -84,6 +84,7 @@ TEST_GEN_PROGS_x86_64 += x86_64/hyperv_features TEST_GEN_PROGS_x86_64 += x86_64/hyperv_ipi TEST_GEN_PROGS_x86_64 += x86_64/hyperv_svm_test TEST_GEN_PROGS_x86_64 += x86_64/hyperv_tlb_flush +TEST_GEN_PROGS_x86_64 += x86_64/kvm_clock_drift TEST_GEN_PROGS_x86_64 += x86_64/kvm_clock_test TEST_GEN_PROGS_x86_64 += x86_64/kvm_pv_test TEST_GEN_PROGS_x86_64 += x86_64/monitor_mwait_test diff --git a/tools/testing/selftests/kvm/x86_64/kvm_clock_drift.c b/tools/testing/selftests/kvm/x86_64/kvm_clock_drift.c new file mode 100644 index 000000000000..324f0dbc5762 --- /dev/null +++ b/tools/testing/selftests/kvm/x86_64/kvm_clock_drift.c @@ -0,0 +1,223 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * The kvmclock drift test. Emulate vCPU hotplug and online to verify if + * there is kvmclock drift. + * + * Adapted from steal_time.c + * + * Copyright (C) 2020, Red Hat, Inc. + * Copyright (C) 2024 Oracle and/or its affiliates. + */ + +#include <asm/kvm_para.h> +#include <asm/pvclock.h> +#include <asm/pvclock-abi.h> +#include <sys/stat.h> + +#include "kvm_util.h" +#include "processor.h" + +#define NR_VCPUS 2 +#define NR_SLOTS 2 +#define KVMCLOCK_SIZE sizeof(struct pvclock_vcpu_time_info) +/* + * KVMCLOCK_GPA is identity mapped + */ +#define KVMCLOCK_GPA (1 << 30) + +static uint64_t kvmclock_gpa = KVMCLOCK_GPA; + +static void guest_code(int cpu) +{ + struct pvclock_vcpu_time_info *kvmclock; + + /* + * vCPU#0 is to detect the change of pvclock_vcpu_time_info + */ + if (cpu == 0) { + GUEST_SYNC(0); + + kvmclock = (struct pvclock_vcpu_time_info *) kvmclock_gpa; + wrmsr(MSR_KVM_SYSTEM_TIME_NEW, kvmclock_gpa | KVM_MSR_ENABLED); + + /* + * Backup the pvclock_vcpu_time_info before vCPU#1 hotplug + */ + kvmclock[1] = kvmclock[0]; + + GUEST_SYNC(2); + /* + * Enter the guest to update pvclock_vcpu_time_info + */ + GUEST_SYNC(4); + } + + /* + * vCPU#1 is to emulate the vCPU hotplug + */ + if (cpu == 1) { + GUEST_SYNC(1); + /* + * This is after the host side MSR_IA32_TSC + */ + GUEST_SYNC(3); + } +} + +static void run_vcpu(struct kvm_vcpu *vcpu) +{ + struct ucall uc; + + vcpu_run(vcpu); + + switch (get_ucall(vcpu, &uc)) { + case UCALL_SYNC: + case UCALL_DONE: + break; + case UCALL_ABORT: + REPORT_GUEST_ASSERT(uc); + default: + TEST_ASSERT(false, "Unexpected exit: %s", + exit_reason_str(vcpu->run->exit_reason)); + } +} + +static void kvmclock_dump(struct pvclock_vcpu_time_info *kvmclock) +{ + pr_info(" version: %u\n", kvmclock->version); + pr_info(" tsc_timestamp: %lu\n", kvmclock->tsc_timestamp); + pr_info(" system_time: %lu\n", kvmclock->system_time); + pr_info(" tsc_to_system_mul: %u\n", kvmclock->tsc_to_system_mul); + pr_info(" tsc_shift: %d\n", kvmclock->tsc_shift); + pr_info(" flags: %u\n", kvmclock->flags); + pr_info("\n"); +} + +#define CLOCKSOURCE_PATH "/sys/devices/system/clocksource/clocksource0/current_clocksource" + +static void check_clocksource(void) +{ + char *clk_name; + struct stat st; + FILE *fp; + + fp = fopen(CLOCKSOURCE_PATH, "r"); + if (!fp) { + pr_info("failed to open clocksource file: %d; assuming TSC.\n", + errno); + return; + } + + if (fstat(fileno(fp), &st)) { + pr_info("failed to stat clocksource file: %d; assuming TSC.\n", + errno); + goto out; + } + + clk_name = malloc(st.st_size); + TEST_ASSERT(clk_name, "failed to allocate buffer to read file\n"); + + if (!fgets(clk_name, st.st_size, fp)) { + pr_info("failed to read clocksource file: %d; assuming TSC.\n", + ferror(fp)); + goto out; + } + + TEST_ASSERT(!strncmp(clk_name, "tsc\n", st.st_size), + "clocksource not supported: %s", clk_name); +out: + fclose(fp); +} + +int main(int argc, char *argv[]) +{ + struct pvclock_vcpu_time_info *kvmclock; + struct kvm_vcpu *vcpus[NR_VCPUS]; + uint64_t clock_old, clock_new; + bool verbose = false; + unsigned int gpages; + struct kvm_vm *vm; + int period = 2; + uint64_t tsc; + int opt; + + check_clocksource(); + + while ((opt = getopt(argc, argv, "p:vh")) != -1) { + switch (opt) { + case 'p': + period = atoi_positive("The period (seconds) between vCPU hotplug", + optarg); + break; + case 'v': + verbose = true; + break; + case 'h': + default: + pr_info("usage: %s [-p period (seconds)] [-v]\n", argv[0]); + exit(1); + } + } + + vm = vm_create_with_vcpus(NR_VCPUS, guest_code, vcpus); + gpages = vm_calc_num_guest_pages(VM_MODE_DEFAULT, + KVMCLOCK_SIZE * NR_SLOTS); + vm_userspace_mem_region_add(vm, VM_MEM_SRC_ANONYMOUS, + KVMCLOCK_GPA, 1, gpages, 0); + virt_map(vm, KVMCLOCK_GPA, KVMCLOCK_GPA, gpages); + + vcpu_args_set(vcpus[0], 1, 0); + vcpu_args_set(vcpus[1], 1, 1); + + /* + * Run vCPU#0 and vCPU#1 to update both pvclock_vcpu_time_info and + * master clock + */ + run_vcpu(vcpus[0]); + run_vcpu(vcpus[1]); + + /* + * Run vCPU#0 to backup the current pvclock_vcpu_time_info + */ + run_vcpu(vcpus[0]); + + sleep(period); + + /* + * Emulate the hotplug of vCPU#1 + */ + vcpu_set_msr(vcpus[1], MSR_IA32_TSC, 0); + + /* + * Emulate the online of vCPU#1 + */ + run_vcpu(vcpus[1]); + + /* + * Run vCPU#0 to backup the new pvclock_vcpu_time_info to detect + * if there is any change or kvmclock drift + */ + run_vcpu(vcpus[0]); + + kvmclock = addr_gva2hva(vm, kvmclock_gpa); + tsc = kvmclock[0].tsc_timestamp; + clock_old = __pvclock_read_cycles(&kvmclock[1], tsc); + clock_new = __pvclock_read_cycles(&kvmclock[0], tsc); + + if (verbose) { + pr_info("kvmclock based on old pvclock_vcpu_time_info: %lu\n", + clock_old); + kvmclock_dump(&kvmclock[1]); + pr_info("kvmclock based on new pvclock_vcpu_time_info: %lu\n", + clock_new); + kvmclock_dump(&kvmclock[0]); + } + + TEST_ASSERT(clock_old == clock_new, + "kvmclock drift detected, old=%lu, new=%lu", + clock_old, clock_new); + + kvm_vm_free(vm); + + return 0; +} base-commit: f2a3fb7234e52f72ff4a38364dbf639cf4c7d6c6 -- 2.34.1

3 weeks, 1 day

2
2
0 0

[PATCH v3 0/3] riscv: mm: Extend mappable memory up to hint address

by Charlie Jenkins

On riscv, mmap currently returns an address from the largest address space that can fit entirely inside of the hint address. This makes it such that the hint address is almost never returned. This patch raises the mappable area up to and including the hint address. This allows mmap to often return the hint address, which allows a performance improvement over searching for a valid address as well as making the behavior more similar to other architectures. Note that a previous patch introduced stronger semantics compared to other architectures for riscv mmap. On riscv, mmap will not use bits in the upper bits of the virtual address depending on the hint address. On other architectures, a random address is returned in the address space requested. On all architectures the hint address will be returned if it is available. This allows riscv applications to configure how many bits in the virtual address should be left empty. This has the two benefits of being able to request address spaces that are smaller than the default and doesn't require the application to know the page table layout of riscv. Signed-off-by: Charlie Jenkins <charlie(a)rivosinc.com> --- Changes in v3: - Add back forgotten semi-colon - Fix test cases - Add support for rv32 - Change cover letter name so it's not the same as patch 1 - Link to v2: https://lore.kernel.org/r/20240130-use_mmap_hint_address-v2-0-f34ebfd33053@… Changes in v2: - Add back forgotten "mmap_end = STACK_TOP_MAX" - Link to v1: https://lore.kernel.org/r/20240129-use_mmap_hint_address-v1-0-4c74da813ba1@… --- Charlie Jenkins (3): riscv: mm: Use hint address in mmap if available selftests: riscv: Generalize mm selftests docs: riscv: Define behavior of mmap Documentation/arch/riscv/vm-layout.rst | 16 ++-- arch/riscv/include/asm/processor.h | 27 +++--- tools/testing/selftests/riscv/mm/mmap_bottomup.c | 23 +---- tools/testing/selftests/riscv/mm/mmap_default.c | 23 +---- tools/testing/selftests/riscv/mm/mmap_test.h | 107 ++++++++++++++--------- 5 files changed, 83 insertions(+), 113 deletions(-) --- base-commit: 556e2d17cae620d549c5474b1ece053430cd50bc change-id: 20240119-use_mmap_hint_address-f9f4b1b6f5f1 -- - Charlie

1 month

4
8
0 0

[PATCH 0/8] iommufd support pasid attach/replace

by Yi Liu

PASID (Process Address Space ID) is a PCIe extension to tag the DMA transactions out of a physical device, and most modern IOMMU hardware have supported PASID granular address translation. So a PASID-capable device can be attached to multiple hwpts (a.k.a. domains), each attachment is tagged with a pasid. This series first adds a missing iommu API to replace domain for a pasid, then adds iommufd APIs for device drivers to attach/replace/detach pasid to/from hwpt per userspace's request, and adds selftest to validate the iommufd APIs. pasid attach/replace is mandatory on Intel VT-d given the PASID table locates in the physical address space hence must be managed by the kernel, both for supporting vSVA and coming SIOV. But it's optional on ARM/AMD which allow configuring the PASID/CD table either in host physical address space or nested on top of an GPA address space. This series only add VT-d support as the minimal requirement. Complete code can be found in below link: https://github.com/yiliu1765/iommufd/tree/iommufd_pasid Change log: v1: - Implemnet iommu_replace_device_pasid() to fall back to the original domain if this replacement failed (Kevin) - Add check in do_attach() to check corressponding attach_fn per the pasid value. rfc: https://lore.kernel.org/linux-iommu/20230926092651.17041-1-yi.l.liu@intel.c… Regards, Yi Liu Kevin Tian (1): iommufd: Support attach/replace hwpt per pasid Lu Baolu (2): iommu: Introduce a replace API for device pasid iommu/vt-d: Add set_dev_pasid callback for nested domain Yi Liu (5): iommufd: replace attach_fn with a structure iommufd/selftest: Add set_dev_pasid and remove_dev_pasid in mock iommu iommufd/selftest: Add a helper to get test device iommufd/selftest: Add test ops to test pasid attach/detach iommufd/selftest: Add coverage for iommufd pasid attach/detach drivers/iommu/intel/nested.c | 47 +++++ drivers/iommu/iommu-priv.h | 2 + drivers/iommu/iommu.c | 82 ++++++-- drivers/iommu/iommufd/Makefile | 1 + drivers/iommu/iommufd/device.c | 50 +++-- drivers/iommu/iommufd/iommufd_private.h | 23 +++ drivers/iommu/iommufd/iommufd_test.h | 24 +++ drivers/iommu/iommufd/pasid.c | 138 ++++++++++++++ drivers/iommu/iommufd/selftest.c | 176 ++++++++++++++++-- include/linux/iommufd.h | 6 + tools/testing/selftests/iommu/iommufd.c | 172 +++++++++++++++++ .../selftests/iommu/iommufd_fail_nth.c | 28 ++- tools/testing/selftests/iommu/iommufd_utils.h | 78 ++++++++ 13 files changed, 785 insertions(+), 42 deletions(-) create mode 100644 drivers/iommu/iommufd/pasid.c -- 2.34.1

1 month

5
35
0 0

[PATCH v2 0/3] riscv: mm: Use hint address in mmap if available

by Charlie Jenkins

On riscv, mmap currently returns an address from the largest address space that can fit entirely inside of the hint address. This makes it such that the hint address is almost never returned. This patch raises the mappable area up to and including the hint address. This allows mmap to often return the hint address, which allows a performance improvement over searching for a valid address as well as making the behavior more similar to other architectures. Note that a previous patch introduced stronger semantics compared to other architectures for riscv mmap. On riscv, mmap will not use bits in the upper bits of the virtual address depending on the hint address. On other architectures, a random address is returned in the address space requested. On all architectures the hint address will be returned if it is available. This allows riscv applications to configure how many bits in the virtual address should be left empty. This has the two benefits of being able to request address spaces that are smaller than the default and doesn't require the application to know the page table layout of riscv. Signed-off-by: Charlie Jenkins <charlie(a)rivosinc.com> --- Changes in v2: - Add back forgotten "mmap_end = STACK_TOP_MAX" - Link to v1: https://lore.kernel.org/r/20240129-use_mmap_hint_address-v1-0-4c74da813ba1@… --- Charlie Jenkins (3): riscv: mm: Use hint address in mmap if available selftests: riscv: Generalize mm selftests docs: riscv: Define behavior of mmap Documentation/arch/riscv/vm-layout.rst | 16 ++-- arch/riscv/include/asm/processor.h | 22 +++--- tools/testing/selftests/riscv/mm/mmap_bottomup.c | 20 +---- tools/testing/selftests/riscv/mm/mmap_default.c | 20 +---- tools/testing/selftests/riscv/mm/mmap_test.h | 93 +++++++++++++----------- 5 files changed, 67 insertions(+), 104 deletions(-) --- base-commit: 556e2d17cae620d549c5474b1ece053430cd50bc change-id: 20240119-use_mmap_hint_address-f9f4b1b6f5f1 -- - Charlie

1 month, 1 week

3
6
0 0

[PATCH v3 0/5] selftests/mm: Improve run_vmtests.sh

by Muhammad Usama Anjum

In this series, I'm trying to add 3 missing tests to vm_runtests.sh which is used to run all the tests in mm suite. These tests weren't running by CIs. While enabling them and through review feedback, I've fixed some problems in tests as well. I've found more flakiness in more tests which I'll be fixing with future patches. hugetlb-read-hwpoison test is being added where it can only run with newly added "-d" (destructive) flag only. Not sure why it is failing again. So once it become stable, we can think of moving it to default set of tests if it doesn't have any side-effect to them. Cc: Ryan Roberts <ryan.roberts(a)arm.com> Cc: Andrew Morton <akpm(a)linux-foundation.org> --- Changes in v3: - Add cover letter - Fix flakiness in tests found during enablement - Move additional tests down in the file - Add "-d" option which poisons the pages and aren't being useable after the test v2: https://lore.kernel.org/all/20240123073615.920324-1-usama.anjum@collabora.c… Muhammad Usama Anjum (5): selftests/mm: hugetlb_reparenting_test: do not unmount selftests/mm: run_vmtests: remove sudo and conform to tap selftests/mm: save and restore nr_hugepages value selftests/mm: protection_keys: save/restore nr_hugepages settings selftests/mm: run_vmtests.sh: add missing tests tools/testing/selftests/mm/Makefile | 5 +++ .../selftests/mm/charge_reserved_hugetlb.sh | 4 +++ .../selftests/mm/hugetlb_reparenting_test.sh | 9 +++-- tools/testing/selftests/mm/on-fault-limit.c | 36 +++++++++---------- tools/testing/selftests/mm/protection_keys.c | 34 ++++++++++++++++++ tools/testing/selftests/mm/run_vmtests.sh | 10 +++++- 6 files changed, 76 insertions(+), 22 deletions(-) -- 2.42.0

1 month, 2 weeks

3
13
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror January 2024