January 2021 - Linux-kselftest-mirror

[PATCH net-next v2 0/3] net: introduce rps_default_mask

by Paolo Abeni

Real-time setups try hard to ensure proper isolation between time critical applications and e.g. network processing performed by the network stack in softirq and RPS is used to move the softirq activity away from the isolated core. If the network configuration is dynamic, with netns and devices routinely created at run-time, enforcing the correct RPS setting on each newly created device allowing to transient bad configuration became complex. These series try to address the above, introducing a new sysctl knob: rps_default_mask. The new sysctl entry allows configuring a systemwide RPS mask, to be enforced since receive queue creation time without any fourther per device configuration required. Additionally, a simple self-test is introduced to check the rps_default_mask behavior. v1 -> v2: - fix sparse warning in patch 2/3 Paolo Abeni (3): net/sysctl: factor-out netdev_rx_queue_set_rps_mask() helper net/core: introduce default_rps_mask netns attribute self-tests: introduce self-tests for RPS default mask Documentation/admin-guide/sysctl/net.rst | 6 ++ include/linux/netdevice.h | 1 + net/core/net-sysfs.c | 73 +++++++++++-------- net/core/sysctl_net_core.c | 58 +++++++++++++++ tools/testing/selftests/net/Makefile | 1 + tools/testing/selftests/net/config | 3 + .../testing/selftests/net/rps_default_mask.sh | 57 +++++++++++++++ 7 files changed, 169 insertions(+), 30 deletions(-) create mode 100755 tools/testing/selftests/net/rps_default_mask.sh -- 2.26.2

1 year, 2 months

4
12
0 0

[PATCH v2 net-next 0/3] ptp: Add adjust phase to support phase offset.

by vincent.cheng.xh＠renesas.com

From: Vincent Cheng <vincent.cheng.xh(a)renesas.com> This series adds adjust phase to the PTP Hardware Clock device interface. Some PTP hardware clocks have a write phase mode that has a built-in hardware filtering capability. The write phase mode utilizes a phase offset control word instead of a frequency offset control word. Add adjust phase function to take advantage of this capability. Changes since v1: - As suggested by Richard Cochran: 1. ops->adjphase is new so need to check for non-null function pointer. 2. Kernel coding style uses lower_case_underscores. 3. Use existing PTP clock API for delayed worker. Vincent Cheng (3): ptp: Add adjphase function to support phase offset control. ptp: Add adjust_phase to ptp_clock_caps capability. ptp: ptp_clockmatrix: Add adjphase() to support PHC write phase mode. drivers/ptp/ptp_chardev.c | 1 + drivers/ptp/ptp_clock.c | 3 ++ drivers/ptp/ptp_clockmatrix.c | 92 +++++++++++++++++++++++++++++++++++ drivers/ptp/ptp_clockmatrix.h | 8 ++- include/linux/ptp_clock_kernel.h | 6 ++- include/uapi/linux/ptp_clock.h | 4 +- tools/testing/selftests/ptp/testptp.c | 6 ++- 7 files changed, 114 insertions(+), 6 deletions(-) -- 2.7.4

1 year, 8 months

5
8
0 0

[PATCH V2 0/3] riscv: add support for restartable sequence

by Vincent Chen

Add RSEQ, restartable sequence, support and related selftest to RISCV. The Kconfig option HAVE_REGS_AND_STACK_ACCESS_API is also required by RSEQ because RSEQ will modify the content of pt_regs.sepc through instruction_pointer_set() during the fixup procedure. In order to select the config HAVE_REGS_AND_STACK_ACCESS_API, the missing APIs for accessing pt_regs are also added in this patch set. The relevant RSEQ tests in kselftest require the Binutils patch "RISC-V: Fix linker problems with TLS copy relocs" to avoid placing PREINIT_ARRAY and TLS variable of librseq.so at the same address. https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=commit;h=3e7bd7f… A segmental fault will happen if binutils misses this patch. Patrick Stählin (1): riscv: add required functions to enable HAVE_REGS_AND_STACK_ACCESS_API Vincent Chen (2): riscv: Add support for restartable sequence rseq/selftests: Add support for riscv Changes since v1: 1. Use the correct register name to access pt_regs arch/riscv/Kconfig | 2 + arch/riscv/include/asm/ptrace.h | 29 +- arch/riscv/kernel/entry.S | 4 + arch/riscv/kernel/ptrace.c | 99 +++++ arch/riscv/kernel/signal.c | 2 + tools/testing/selftests/rseq/param_test.c | 23 ++ tools/testing/selftests/rseq/rseq-riscv.h | 622 ++++++++++++++++++++++++++++++ tools/testing/selftests/rseq/rseq.h | 2 + 8 files changed, 782 insertions(+), 1 deletion(-) create mode 100644 tools/testing/selftests/rseq/rseq-riscv.h -- 2.7.4

2 years, 9 months

3
8
0 0

[PATCH v8 0/7] Syscall User Dispatch

by Gabriel Krisman Bertazi

Hi, This is v8 of syscall user dispatch. Last version got some acks but there was one small documentation fix I wanted to do, as requested by Florian. This also addresses the commit message fixup Peter requested. The only actual code change from v7 is solving a trivial merge conflict I myself created with the entry code fixup I made week and with something else in the TIP tree. I also shared this with glibc and there wasn't any complaints other than the matter about user-notif vs. siginfo, which was discussed in v7 and the understanding is that it is not necessary now and can be added later, if needed, on the same infrastructure without a new api. I'm not sure about TIP the rules, but is it too late to be queued for the next merge window? I'd love to have this in 5.11 if possible, since it has been flying for quite a while. This is based on tip/master. As usual, a working tree with this patchset is available at: https://gitlab.collabora.com/krisman/linux -b syscall-user-dispatch-v8 Previous submissions are archived at: RFC/v1: https://lkml.org/lkml/2020/7/8/96 v2: https://lkml.org/lkml/2020/7/9/17 v3: https://lkml.org/lkml/2020/7/12/4 v4: https://www.spinics.net/lists/linux-kselftest/msg16377.html v5: https://lkml.org/lkml/2020/8/10/1320 v6: https://lkml.org/lkml/2020/9/4/1122 v7: https://lwn.net/Articles/837598/ Gabriel Krisman Bertazi (7): x86: vdso: Expose sigreturn address on vdso to the kernel signal: Expose SYS_USER_DISPATCH si_code type kernel: Implement selective syscall userspace redirection entry: Support Syscall User Dispatch on common syscall entry selftests: Add kselftest for syscall user dispatch selftests: Add benchmark for syscall user dispatch docs: Document Syscall User Dispatch .../admin-guide/syscall-user-dispatch.rst | 87 +++++ arch/x86/entry/vdso/vdso2c.c | 2 + arch/x86/entry/vdso/vdso32/sigreturn.S | 2 + arch/x86/entry/vdso/vma.c | 15 + arch/x86/include/asm/elf.h | 2 + arch/x86/include/asm/vdso.h | 2 + arch/x86/kernel/signal_compat.c | 2 +- fs/exec.c | 3 + include/linux/entry-common.h | 2 + include/linux/sched.h | 2 + include/linux/syscall_user_dispatch.h | 40 +++ include/linux/thread_info.h | 2 + include/uapi/asm-generic/siginfo.h | 3 +- include/uapi/linux/prctl.h | 5 + kernel/entry/Makefile | 2 +- kernel/entry/common.c | 17 + kernel/entry/common.h | 16 + kernel/entry/syscall_user_dispatch.c | 102 ++++++ kernel/fork.c | 1 + kernel/sys.c | 5 + tools/testing/selftests/Makefile | 1 + .../syscall_user_dispatch/.gitignore | 3 + .../selftests/syscall_user_dispatch/Makefile | 9 + .../selftests/syscall_user_dispatch/config | 1 + .../syscall_user_dispatch/sud_benchmark.c | 200 +++++++++++ .../syscall_user_dispatch/sud_test.c | 310 ++++++++++++++++++ 26 files changed, 833 insertions(+), 3 deletions(-) create mode 100644 Documentation/admin-guide/syscall-user-dispatch.rst create mode 100644 include/linux/syscall_user_dispatch.h create mode 100644 kernel/entry/common.h create mode 100644 kernel/entry/syscall_user_dispatch.c create mode 100644 tools/testing/selftests/syscall_user_dispatch/.gitignore create mode 100644 tools/testing/selftests/syscall_user_dispatch/Makefile create mode 100644 tools/testing/selftests/syscall_user_dispatch/config create mode 100644 tools/testing/selftests/syscall_user_dispatch/sud_benchmark.c create mode 100644 tools/testing/selftests/syscall_user_dispatch/sud_test.c -- 2.29.2

2 years, 10 months

6
17
0 0

[PATCH] selftests: kvm: remove reassignment of non-absolute variables

by Bill Wendling

Clang's integrated assembler does not allow symbols with non-absolute values to be reassigned. Modify the interrupt entry loop macro to be compatible with IAS by using a label and an offset. Cc: Jian Cai <caij2003(a)gmail.com> Signed-off-by: Bill Wendling <morbo(a)google.com> References: https://lore.kernel.org/lkml/20200714233024.1789985-1-caij2003@gmail.com/ --- tools/testing/selftests/kvm/lib/x86_64/handlers.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/kvm/lib/x86_64/handlers.S b/tools/testing/selftests/kvm/lib/x86_64/handlers.S index aaf7bc7d2ce1..3f9181e9a0a7 100644 --- a/tools/testing/selftests/kvm/lib/x86_64/handlers.S +++ b/tools/testing/selftests/kvm/lib/x86_64/handlers.S @@ -54,9 +54,9 @@ idt_handlers: .align 8 /* Fetch current address and append it to idt_handlers. */ - current_handler = . +0 : .pushsection .rodata -.quad current_handler + .quad 0b .popsection .if ! \has_error -- 2.29.2.576.ga3fc446d84-goog

2 years, 11 months

4
9
0 0

[PATCH v3 0/5] Some optimizations related to sgx

by Tianjia Zhang

This is an optimization of a set of sgx-related codes, each of which is independent of the patch. Because the second and third patches have conflicting dependencies, these patches are put together. --- v3 changes: * split free_cnt count and spin lock optimization into two patches v2 changes: * review suggested changes Tianjia Zhang (5): selftests/x86: Simplify the code to get vdso base address in sgx x86/sgx: Optimize the locking range in sgx_sanitize_section() x86/sgx: Optimize the free_cnt count in sgx_epc_section x86/sgx: Allows ioctl PROVISION to execute before CREATE x86/sgx: Remove redundant if conditions in sgx_encl_create arch/x86/kernel/cpu/sgx/driver.c | 1 + arch/x86/kernel/cpu/sgx/ioctl.c | 9 +++++---- arch/x86/kernel/cpu/sgx/main.c | 13 +++++-------- tools/testing/selftests/sgx/main.c | 24 ++++-------------------- 4 files changed, 15 insertions(+), 32 deletions(-) -- 2.19.1.3.ge56e4f7

3 years, 2 months

4
17
0 0

[PATCH] selftests/harness: pass variant to teardown

by Willem de Bruijn

From: Willem de Bruijn <willemb(a)google.com> FIXTURE_VARIANT data is passed to FIXTURE_SETUP and TEST_F as variant. In some cases, the variant will change the setup, such that expections also change on teardown. Also pass variant to FIXTURE_TEARDOWN. The new FIXTURE_TEARDOWN logic is identical to that in FIXTURE_SETUP, right above. Signed-off-by: Willem de Bruijn <willemb(a)google.com> --- For one use of this see tentative tools/testing/selftests/filesystems/selectpoll.c kselftest at https://github.com/wdebruij/linux-next-mirror/commit/12b4d183ac9140c1360637… --- tools/testing/selftests/kselftest_harness.h | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/tools/testing/selftests/kselftest_harness.h b/tools/testing/selftests/kselftest_harness.h index f19804df244c..6a27e79278e8 100644 --- a/tools/testing/selftests/kselftest_harness.h +++ b/tools/testing/selftests/kselftest_harness.h @@ -283,7 +283,9 @@ #define FIXTURE_TEARDOWN(fixture_name) \ void fixture_name##_teardown( \ struct __test_metadata __attribute__((unused)) *_metadata, \ - FIXTURE_DATA(fixture_name) __attribute__((unused)) *self) + FIXTURE_DATA(fixture_name) __attribute__((unused)) *self, \ + const FIXTURE_VARIANT(fixture_name) \ + __attribute__((unused)) *variant) /** * FIXTURE_VARIANT(fixture_name) - Optionally called once per fixture @@ -298,9 +300,9 @@ * ... * }; * - * Defines type of constant parameters provided to FIXTURE_SETUP() and TEST_F() - * as *variant*. Variants allow the same tests to be run with different - * arguments. + * Defines type of constant parameters provided to FIXTURE_SETUP(), TEST_F() and + * FIXTURE_TEARDOWN as *variant*. Variants allow the same tests to be run with + * different arguments. */ #define FIXTURE_VARIANT(fixture_name) struct _fixture_variant_##fixture_name @@ -382,7 +384,7 @@ if (!_metadata->passed) \ return; \ fixture_name##_##test_name(_metadata, &self, variant->data); \ - fixture_name##_teardown(_metadata, &self); \ + fixture_name##_teardown(_metadata, &self, variant->data); \ } \ static struct __test_metadata \ _##fixture_name##_##test_name##_object = { \ -- 2.29.2.576.ga3fc446d84-goog

3 years, 2 months

3
4
0 0

[PATCH] selftests/seccomp: Accept any valid fd in user_notification_addfd

by Seth Forshee

This test expects fds to have specific values, which works fine when the test is run standalone. However, the kselftest runner consumes a couple of extra fds for redirection when running tests, so the test fails when run via kselftest. Change the test to pass on any valid fd number. Signed-off-by: Seth Forshee <seth.forshee(a)canonical.com> --- tools/testing/selftests/seccomp/seccomp_bpf.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/tools/testing/selftests/seccomp/seccomp_bpf.c b/tools/testing/selftests/seccomp/seccomp_bpf.c index 26c72f2b61b1..9338df6f4ca8 100644 --- a/tools/testing/selftests/seccomp/seccomp_bpf.c +++ b/tools/testing/selftests/seccomp/seccomp_bpf.c @@ -4019,18 +4019,14 @@ TEST(user_notification_addfd) /* Verify we can set an arbitrary remote fd */ fd = ioctl(listener, SECCOMP_IOCTL_NOTIF_ADDFD, &addfd); - /* - * The child has fds 0(stdin), 1(stdout), 2(stderr), 3(memfd), - * 4(listener), so the newly allocated fd should be 5. - */ - EXPECT_EQ(fd, 5); + EXPECT_GE(fd, 0); EXPECT_EQ(filecmp(getpid(), pid, memfd, fd), 0); /* Verify we can set an arbitrary remote fd with large size */ memset(&big, 0x0, sizeof(big)); big.addfd = addfd; fd = ioctl(listener, SECCOMP_IOCTL_NOTIF_ADDFD_BIG, &big); - EXPECT_EQ(fd, 6); + EXPECT_GE(fd, 0); /* Verify we can set a specific remote fd */ addfd.newfd = 42; -- 2.29.2

3 years, 2 months

3
3
0 0

Correct .gitignore in several places for kselftest outputs

by Erik Hollensbe

Sincerely hope I did this right; first time contributor, learning the patch workflow. I took the opportunity to fix two .gitignore files that were leaving stale worktree/index outputs after running `make kselftest` against recent mainline (76c057c84d286140c6c416c3b4ba832cd1d8984e). Thanks for your time!

3 years, 2 months

3
5
0 0

[PATCH] selftests/timens: add futex binary to .gitignore

by Tobias Klauser

Add the futex test binary introduced by commit a4fd8414659b ("selftests/timens: Add a test for futex()") to .gitignore. Signed-off-by: Tobias Klauser <tklauser(a)distanz.ch> --- tools/testing/selftests/timens/.gitignore | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/testing/selftests/timens/.gitignore b/tools/testing/selftests/timens/.gitignore index 2e43851b47c1..fe1eb8271b35 100644 --- a/tools/testing/selftests/timens/.gitignore +++ b/tools/testing/selftests/timens/.gitignore @@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only clock_nanosleep exec +futex gettime_perf gettime_perf_cold procfs -- 2.29.0

3 years, 2 months

2
1
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror January 2021