Verify when a bond is configured with {up,down}delay and the link state of slave members flaps if there are no remaining members up the bond should immediately select a member to bring up. (from bonding.txt section 13.1 paragraph 4)
Suggested-by: Liang Li liali@redhat.com Signed-off-by: Jonathan Toppins jtoppins@redhat.com ---
Notes: v2: * reduced the number of icmp echos to two (-c 2) and removed the unneeded `return 0` from function `test_bond_recovery`.
.../selftests/drivers/net/bonding/Makefile | 4 +- .../selftests/drivers/net/bonding/lag_lib.sh | 106 ++++++++++++++++++ .../net/bonding/mode-1-recovery-updelay.sh | 45 ++++++++ .../net/bonding/mode-2-recovery-updelay.sh | 45 ++++++++ .../selftests/drivers/net/bonding/settings | 2 +- 5 files changed, 200 insertions(+), 2 deletions(-) create mode 100755 tools/testing/selftests/drivers/net/bonding/mode-1-recovery-updelay.sh create mode 100755 tools/testing/selftests/drivers/net/bonding/mode-2-recovery-updelay.sh
diff --git a/tools/testing/selftests/drivers/net/bonding/Makefile b/tools/testing/selftests/drivers/net/bonding/Makefile index 6b8d2e2f23c2..0f3921908b07 100644 --- a/tools/testing/selftests/drivers/net/bonding/Makefile +++ b/tools/testing/selftests/drivers/net/bonding/Makefile @@ -5,7 +5,9 @@ TEST_PROGS := \ bond-arp-interval-causes-panic.sh \ bond-break-lacpdu-tx.sh \ bond-lladdr-target.sh \ - dev_addr_lists.sh + dev_addr_lists.sh \ + mode-1-recovery-updelay.sh \ + mode-2-recovery-updelay.sh
TEST_FILES := \ lag_lib.sh \ diff --git a/tools/testing/selftests/drivers/net/bonding/lag_lib.sh b/tools/testing/selftests/drivers/net/bonding/lag_lib.sh index 16c7fb858ac1..2a268b17b61f 100644 --- a/tools/testing/selftests/drivers/net/bonding/lag_lib.sh +++ b/tools/testing/selftests/drivers/net/bonding/lag_lib.sh @@ -1,6 +1,8 @@ #!/bin/bash # SPDX-License-Identifier: GPL-2.0
+NAMESPACES="" + # Test that a link aggregation device (bonding, team) removes the hardware # addresses that it adds on its underlying devices. test_LAG_cleanup() @@ -59,3 +61,107 @@ test_LAG_cleanup()
log_test "$driver cleanup mode $mode" } + +# Build a generic 2 node net namespace with 2 connections +# between the namespaces +# +# +-----------+ +-----------+ +# | node1 | | node2 | +# | | | | +# | | | | +# | eth0 +-------+ eth0 | +# | | | | +# | eth1 +-------+ eth1 | +# | | | | +# +-----------+ +-----------+ +lag_setup2x2() +{ + local state=${1:-down} + local namespaces="lag_node1 lag_node2" + + # create namespaces + for n in ${namespaces}; do + ip netns add ${n} + done + + # wire up namespaces + ip link add name lag1 type veth peer name lag1-end + ip link set dev lag1 netns lag_node1 $state name eth0 + ip link set dev lag1-end netns lag_node2 $state name eth0 + + ip link add name lag1 type veth peer name lag1-end + ip link set dev lag1 netns lag_node1 $state name eth1 + ip link set dev lag1-end netns lag_node2 $state name eth1 + + NAMESPACES="${namespaces}" +} + +# cleanup all lag related namespaces and remove the bonding module +lag_cleanup() +{ + for n in ${NAMESPACES}; do + ip netns delete ${n} >/dev/null 2>&1 || true + done + modprobe -r bonding +} + +SWITCH="lag_node1" +CLIENT="lag_node2" +CLIENTIP="172.20.2.1" +SWITCHIP="172.20.2.2" + +lag_setup_network() +{ + lag_setup2x2 "down" + + # create switch + ip netns exec ${SWITCH} ip link add br0 up type bridge + ip netns exec ${SWITCH} ip link set eth0 master br0 up + ip netns exec ${SWITCH} ip link set eth1 master br0 up + ip netns exec ${SWITCH} ip addr add ${SWITCHIP}/24 dev br0 +} + +lag_reset_network() +{ + ip netns exec ${CLIENT} ip link del bond0 + ip netns exec ${SWITCH} ip link set eth0 up + ip netns exec ${SWITCH} ip link set eth1 up +} + +create_bond() +{ + # create client + ip netns exec ${CLIENT} ip link set eth0 down + ip netns exec ${CLIENT} ip link set eth1 down + + ip netns exec ${CLIENT} ip link add bond0 type bond $@ + ip netns exec ${CLIENT} ip link set eth0 master bond0 + ip netns exec ${CLIENT} ip link set eth1 master bond0 + ip netns exec ${CLIENT} ip link set bond0 up + ip netns exec ${CLIENT} ip addr add ${CLIENTIP}/24 dev bond0 +} + +test_bond_recovery() +{ + RET=0 + + create_bond $@ + + # verify connectivity + ip netns exec ${CLIENT} ping ${SWITCHIP} -c 2 >/dev/null 2>&1 + check_err $? "No connectivity" + + # force the links of the bond down + ip netns exec ${SWITCH} ip link set eth0 down + sleep 2 + ip netns exec ${SWITCH} ip link set eth0 up + ip netns exec ${SWITCH} ip link set eth1 down + + # re-verify connectivity + ip netns exec ${CLIENT} ping ${SWITCHIP} -c 2 >/dev/null 2>&1 + + local rc=$? + check_err $rc "Bond failed to recover" + log_test "$1 ($2) bond recovery" + lag_reset_network +} diff --git a/tools/testing/selftests/drivers/net/bonding/mode-1-recovery-updelay.sh b/tools/testing/selftests/drivers/net/bonding/mode-1-recovery-updelay.sh new file mode 100755 index 000000000000..ad4c845a4ac7 --- /dev/null +++ b/tools/testing/selftests/drivers/net/bonding/mode-1-recovery-updelay.sh @@ -0,0 +1,45 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 + +# Regression Test: +# When the bond is configured with down/updelay and the link state of +# slave members flaps if there are no remaining members up the bond +# should immediately select a member to bring up. (from bonding.txt +# section 13.1 paragraph 4) +# +# +-------------+ +-----------+ +# | client | | switch | +# | | | | +# | +--------| link1 |-----+ | +# | | +-------+ | | +# | | | | | | +# | | +-------+ | | +# | | bond | link2 | Br0 | | +# +-------------+ +-----------+ +# 172.20.2.1 172.20.2.2 + + +REQUIRE_MZ=no +REQUIRE_JQ=no +NUM_NETIFS=0 +lib_dir=$(dirname "$0") +source "$lib_dir"/net_forwarding_lib.sh +source "$lib_dir"/lag_lib.sh + +cleanup() +{ + lag_cleanup +} + +trap cleanup 0 1 2 + +lag_setup_network +test_bond_recovery mode 1 miimon 100 updelay 0 +test_bond_recovery mode 1 miimon 100 updelay 200 +test_bond_recovery mode 1 miimon 100 updelay 500 +test_bond_recovery mode 1 miimon 100 updelay 1000 +test_bond_recovery mode 1 miimon 100 updelay 2000 +test_bond_recovery mode 1 miimon 100 updelay 5000 +test_bond_recovery mode 1 miimon 100 updelay 10000 + +exit "$EXIT_STATUS" diff --git a/tools/testing/selftests/drivers/net/bonding/mode-2-recovery-updelay.sh b/tools/testing/selftests/drivers/net/bonding/mode-2-recovery-updelay.sh new file mode 100755 index 000000000000..2330d37453f9 --- /dev/null +++ b/tools/testing/selftests/drivers/net/bonding/mode-2-recovery-updelay.sh @@ -0,0 +1,45 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 + +# Regression Test: +# When the bond is configured with down/updelay and the link state of +# slave members flaps if there are no remaining members up the bond +# should immediately select a member to bring up. (from bonding.txt +# section 13.1 paragraph 4) +# +# +-------------+ +-----------+ +# | client | | switch | +# | | | | +# | +--------| link1 |-----+ | +# | | +-------+ | | +# | | | | | | +# | | +-------+ | | +# | | bond | link2 | Br0 | | +# +-------------+ +-----------+ +# 172.20.2.1 172.20.2.2 + + +REQUIRE_MZ=no +REQUIRE_JQ=no +NUM_NETIFS=0 +lib_dir=$(dirname "$0") +source "$lib_dir"/net_forwarding_lib.sh +source "$lib_dir"/lag_lib.sh + +cleanup() +{ + lag_cleanup +} + +trap cleanup 0 1 2 + +lag_setup_network +test_bond_recovery mode 2 miimon 100 updelay 0 +test_bond_recovery mode 2 miimon 100 updelay 200 +test_bond_recovery mode 2 miimon 100 updelay 500 +test_bond_recovery mode 2 miimon 100 updelay 1000 +test_bond_recovery mode 2 miimon 100 updelay 2000 +test_bond_recovery mode 2 miimon 100 updelay 5000 +test_bond_recovery mode 2 miimon 100 updelay 10000 + +exit "$EXIT_STATUS" diff --git a/tools/testing/selftests/drivers/net/bonding/settings b/tools/testing/selftests/drivers/net/bonding/settings index 867e118223cd..6091b45d226b 100644 --- a/tools/testing/selftests/drivers/net/bonding/settings +++ b/tools/testing/selftests/drivers/net/bonding/settings @@ -1 +1 @@ -timeout=60 +timeout=120
linux-kselftest-mirror@lists.linaro.org
-
Jonathan Toppins