For this patchset, test cases of the qdisc modules are added to the tc-testing test suite.
Last, thanks to Victor for testing and suggestion.
After a test case is added locally, the test result is as follows:
./tdc.py -c atm ok 1 7628 - Create ATM with default setting ok 2 390a - Delete ATM with valid handle ok 3 32a0 - Show ATM class ok 4 6310 - Dump ATM stats
./tdc.py -c choke ok 1 8937 - Create CHOKE with default setting ok 2 48c0 - Create CHOKE with min packet setting ok 3 38c1 - Create CHOKE with max packet setting ok 4 234a - Create CHOKE with ecn setting ok 5 4380 - Create CHOKE with burst setting ok 6 48c7 - Delete CHOKE with valid handle ok 7 4398 - Replace CHOKE with min setting ok 8 0301 - Change CHOKE with limit setting
./tdc.py -c codel ok 1 983a - Create CODEL with default setting ok 2 38aa - Create CODEL with limit packet setting ok 3 9178 - Create CODEL with target setting ok 4 78d1 - Create CODEL with interval setting ok 5 238a - Create CODEL with ecn setting ok 6 939c - Create CODEL with ce_threshold setting ok 7 8380 - Delete CODEL with valid handle ok 8 289c - Replace CODEL with limit setting ok 9 0648 - Change CODEL with limit setting
./tdc.py -c etf ok 1 34ba - Create ETF with default setting ok 2 438f - Create ETF with delta nanos setting ok 3 9041 - Create ETF with deadline_mode setting ok 4 9a0c - Create ETF with skip_sock_check setting ok 5 2093 - Delete ETF with valid handle
./tdc.py -c fq ok 1 983b - Create FQ with default setting ok 2 38a1 - Create FQ with limit packet setting ok 3 0a18 - Create FQ with flow_limit setting ok 4 2390 - Create FQ with quantum setting ok 5 845b - Create FQ with initial_quantum setting ok 6 9398 - Create FQ with maxrate setting ok 7 342c - Create FQ with nopacing setting ok 8 6391 - Create FQ with refill_delay setting ok 9 238b - Create FQ with low_rate_threshold setting ok 10 7582 - Create FQ with orphan_mask setting ok 11 4894 - Create FQ with timer_slack setting ok 12 324c - Create FQ with ce_threshold setting ok 13 424a - Create FQ with horizon time setting ok 14 89e1 - Create FQ with horizon_cap setting ok 15 32e1 - Delete FQ with valid handle ok 16 49b0 - Replace FQ with limit setting ok 17 9478 - Change FQ with limit setting
./tdc.py -c gred ok 1 8942 - Create GRED with default setting ok 2 5783 - Create GRED with grio setting ok 3 8a09 - Create GRED with limit setting ok 4 48cb - Create GRED with ecn setting ok 5 763a - Change GRED setting ok 6 8309 - Show GRED class
./tdc.py -c hhf ok 1 4812 - Create HHF with default setting ok 2 8a92 - Create HHF with limit setting ok 3 3491 - Create HHF with quantum setting ok 4 ba04 - Create HHF with reset_timeout setting ok 5 4238 - Create HHF with admit_bytes setting ok 6 839f - Create HHF with evict_timeout setting ok 7 a044 - Create HHF with non_hh_weight setting ok 8 32f9 - Change HHF with limit setting ok 9 385e - Show HHF class
./tdc.py -c pfifo_fast ok 1 900c - Create pfifo_fast with default setting ok 2 7470 - Dump pfifo_fast stats ok 3 b974 - Replace pfifo_fast with different handle ok 4 3240 - Delete pfifo_fast with valid handle ok 5 4385 - Delete pfifo_fast with invalid handle
./tdc.py -c plug ok 1 3289 - Create PLUG with default setting ok 2 0917 - Create PLUG with block setting ok 3 483b - Create PLUG with release setting ok 4 4995 - Create PLUG with release_indefinite setting ok 5 389c - Create PLUG with limit setting ok 6 384a - Delete PLUG with valid handle ok 7 439a - Replace PLUG with limit setting ok 8 9831 - Change PLUG with limit setting
./tdc.py -c sfb ok 1 3294 - Create SFB with default setting ok 2 430a - Create SFB with rehash setting ok 3 3410 - Create SFB with db setting ok 4 49a0 - Create SFB with limit setting ok 5 1241 - Create SFB with max setting ok 6 3249 - Create SFB with target setting ok 7 30a9 - Create SFB with increment setting ok 8 239a - Create SFB with decrement setting ok 9 9301 - Create SFB with penalty_rate setting ok 10 2a01 - Create SFB with penalty_burst setting ok 11 3209 - Change SFB with rehash setting ok 12 5447 - Show SFB class
./tdc.py -c sfq ok 1 7482 - Create SFQ with default setting ok 2 c186 - Create SFQ with limit setting ok 3 ae23 - Create SFQ with perturb setting ok 4 a430 - Create SFQ with quantum setting ok 5 4539 - Create SFQ with divisor setting ok 6 b089 - Create SFQ with flows setting ok 7 99a0 - Create SFQ with depth setting ok 8 7389 - Create SFQ with headdrop setting ok 9 6472 - Create SFQ with redflowlimit setting ok 10 8929 - Show SFQ class
./tdc.py -c skbprio ok 1 283e - Create skbprio with default setting ok 2 c086 - Create skbprio with limit setting ok 3 6733 - Change skbprio with limit setting ok 4 2958 - Show skbprio class
./tdc.py -c taprio ok 1 ba39 - Add taprio Qdisc to multi-queue device (8 queues) ok 2 9462 - Add taprio Qdisc with multiple sched-entry ok 3 8d92 - Add taprio Qdisc with txtime-delay ok 4 d092 - Delete taprio Qdisc with valid handle ok 5 8471 - Show taprio class ok 6 0a85 - Add taprio Qdisc to single-queue device
./tdc.py -c tbf ok 1 6430 - Create TBF with default setting ok 2 0518 - Create TBF with mtu setting ok 3 320a - Create TBF with peakrate setting ok 4 239b - Create TBF with latency setting ok 5 c975 - Create TBF with overhead setting ok 6 948c - Create TBF with linklayer setting ok 7 3549 - Replace TBF with mtu ok 8 f948 - Change TBF with latency time ok 9 2348 - Show TBF class
./tdc.py -c teql ok 1 84a0 - Create TEQL with default setting ok 2 7734 - Create TEQL with multiple device ok 3 34a9 - Delete TEQL with valid handle ok 4 6289 - Show TEQL stats
--- v3: add config v2: modify subject prefix ---
Zhengchao Shao (15): selftests/tc-testing: add selftests for atm qdisc selftests/tc-testing: add selftests for choke qdisc selftests/tc-testing: add selftests for codel qdisc selftests/tc-testing: add selftests for etf qdisc selftests/tc-testing: add selftests for fq qdisc selftests/tc-testing: add selftests for gred qdisc selftests/tc-testing: add selftests for hhf qdisc selftests/tc-testing: add selftests for pfifo_fast qdisc selftests/tc-testing: add selftests for plug qdisc selftests/tc-testing: add selftests for sfb qdisc selftests/tc-testing: add selftests for sfq qdisc selftests/tc-testing: add selftests for skbprio qdisc selftests/tc-testing: add selftests for taprio qdisc selftests/tc-testing: add selftests for tbf qdisc selftests/tc-testing: add selftests for teql qdisc
tools/testing/selftests/tc-testing/config | 15 + .../tc-testing/tc-tests/qdiscs/atm.json | 94 +++++ .../tc-testing/tc-tests/qdiscs/choke.json | 188 +++++++++ .../tc-testing/tc-tests/qdiscs/codel.json | 211 ++++++++++ .../tc-testing/tc-tests/qdiscs/etf.json | 117 ++++++ .../tc-testing/tc-tests/qdiscs/fq.json | 395 ++++++++++++++++++ .../tc-testing/tc-tests/qdiscs/gred.json | 164 ++++++++ .../tc-testing/tc-tests/qdiscs/hhf.json | 210 ++++++++++ .../tc-tests/qdiscs/pfifo_fast.json | 119 ++++++ .../tc-testing/tc-tests/qdiscs/plug.json | 188 +++++++++ .../tc-testing/tc-tests/qdiscs/sfb.json | 279 +++++++++++++ .../tc-testing/tc-tests/qdiscs/sfq.json | 232 ++++++++++ .../tc-testing/tc-tests/qdiscs/skbprio.json | 95 +++++ .../tc-testing/tc-tests/qdiscs/taprio.json | 135 ++++++ .../tc-testing/tc-tests/qdiscs/tbf.json | 211 ++++++++++ .../tc-testing/tc-tests/qdiscs/teql.json | 97 +++++ 16 files changed, 2750 insertions(+) create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/atm.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/choke.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/codel.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/etf.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/fq.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/gred.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/hhf.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/pfifo_fast.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/plug.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfb.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfq.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/skbprio.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/taprio.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/tbf.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/teql.json
Test 7628: Create ATM with default setting Test 390a: Delete ATM with valid handle Test 32a0: Show ATM class Test 6310: Dump ATM stats
Signed-off-by: Zhengchao Shao shaozhengchao@huawei.com --- tools/testing/selftests/tc-testing/config | 2 + .../tc-testing/tc-tests/qdiscs/atm.json | 94 +++++++++++++++++++ 2 files changed, 96 insertions(+) create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/atm.json
diff --git a/tools/testing/selftests/tc-testing/config b/tools/testing/selftests/tc-testing/config index a3239d5e40c7..711e9e6cef9b 100644 --- a/tools/testing/selftests/tc-testing/config +++ b/tools/testing/selftests/tc-testing/config @@ -12,6 +12,7 @@ CONFIG_NET_SCHED=y # # Queueing/Scheduling # +CONFIG_NET_SCH_ATM=m CONFIG_NET_SCH_PRIO=m CONFIG_NET_SCH_INGRESS=m
@@ -67,3 +68,4 @@ CONFIG_NETDEVSIM=m ## Network testing # CONFIG_CAN=m +CONFIG_ATM=y diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/atm.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/atm.json new file mode 100644 index 000000000000..f5bc8670a67d --- /dev/null +++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/atm.json @@ -0,0 +1,94 @@ +[ + { + "id": "7628", + "name": "Create ATM with default setting", + "category": [ + "qdisc", + "atm" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root atm", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc atm 1: root refcnt", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "390a", + "name": "Delete ATM with valid handle", + "category": [ + "qdisc", + "atm" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root atm" + ], + "cmdUnderTest": "$TC qdisc del dev $DUMMY handle 1: root", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc atm 1: root refcnt", + "matchCount": "0", + "teardown": [ + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "32a0", + "name": "Show ATM class", + "category": [ + "qdisc", + "atm" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root atm", + "expExitCode": "0", + "verifyCmd": "$TC class show dev $DUMMY", + "matchPattern": "class atm 1: parent 1:", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "6310", + "name": "Dump ATM stats", + "category": [ + "qdisc", + "atm" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root atm", + "expExitCode": "0", + "verifyCmd": "$TC -s qdisc show dev $DUMMY", + "matchPattern": "qdisc atm 1: root refcnt", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + } +]
Test 8937: Create CHOKE with default setting Test 48c0: Create CHOKE with min packet setting Test 38c1: Create CHOKE with max packet setting Test 234a: Create CHOKE with ecn setting Test 4380: Create CHOKE with burst setting Test 48c7: Delete CHOKE with valid handle Test 4398: Replace CHOKE with min setting Test 0301: Change CHOKE with limit setting
Signed-off-by: Zhengchao Shao shaozhengchao@huawei.com --- tools/testing/selftests/tc-testing/config | 1 + .../tc-testing/tc-tests/qdiscs/choke.json | 188 ++++++++++++++++++ 2 files changed, 189 insertions(+) create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/choke.json
diff --git a/tools/testing/selftests/tc-testing/config b/tools/testing/selftests/tc-testing/config index 711e9e6cef9b..e104e8ec30aa 100644 --- a/tools/testing/selftests/tc-testing/config +++ b/tools/testing/selftests/tc-testing/config @@ -13,6 +13,7 @@ CONFIG_NET_SCHED=y # Queueing/Scheduling # CONFIG_NET_SCH_ATM=m +CONFIG_NET_SCH_CHOKE=m CONFIG_NET_SCH_PRIO=m CONFIG_NET_SCH_INGRESS=m
diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/choke.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/choke.json new file mode 100644 index 000000000000..31b7775d25fc --- /dev/null +++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/choke.json @@ -0,0 +1,188 @@ +[ + { + "id": "8937", + "name": "Create CHOKE with default setting", + "category": [ + "qdisc", + "choke" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root choke limit 1000 bandwidth 10000", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc choke 1: root refcnt [0-9]+ limit 1000p min 83p max 250p", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "48c0", + "name": "Create CHOKE with min packet setting", + "category": [ + "qdisc", + "choke" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root choke limit 1000 bandwidth 10000 min 100", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc choke 1: root refcnt [0-9]+ limit 1000p min 100p max 250p", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "38c1", + "name": "Create CHOKE with max packet setting", + "category": [ + "qdisc", + "choke" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root choke limit 1000 bandwidth 10000 max 900", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc choke 1: root refcnt [0-9]+ limit 1000p min.*max 900p", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "234a", + "name": "Create CHOKE with ecn setting", + "category": [ + "qdisc", + "choke" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root choke limit 1000 bandwidth 10000 ecn", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc choke 1: root refcnt [0-9]+ limit 1000p min 83p max 250p ecn", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "4380", + "name": "Create CHOKE with burst setting", + "category": [ + "qdisc", + "choke" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root choke limit 1000 bandwidth 10000 burst 100", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc choke 1: root refcnt [0-9]+ limit 1000p min 83p max 250p", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "48c7", + "name": "Delete CHOKE with valid handle", + "category": [ + "qdisc", + "choke" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root choke limit 1000 bandwidth 10000" + ], + "cmdUnderTest": "$TC qdisc del dev $DUMMY handle 1: root", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc choke 1: root refcnt [0-9]+ limit 1000p min 83p max 250p", + "matchCount": "0", + "teardown": [ + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "4398", + "name": "Replace CHOKE with min setting", + "category": [ + "qdisc", + "choke" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root choke limit 1000 bandwidth 10000" + ], + "cmdUnderTest": "$TC qdisc replace dev $DUMMY handle 1: root choke limit 1000 bandwidth 10000 min 100", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc choke 1: root refcnt [0-9]+ limit 1000p min 100p max 250p", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "0301", + "name": "Change CHOKE with limit setting", + "category": [ + "qdisc", + "choke" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root choke limit 1000 bandwidth 10000" + ], + "cmdUnderTest": "$TC qdisc change dev $DUMMY handle 1: root choke limit 1000 bandwidth 10000 min 100", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc choke 1: root refcnt [0-9]+ limit 1000p min 100p max 250p", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + } +]
Test 983a: Create CODEL with default setting Test 38aa: Create CODEL with limit packet setting Test 9178: Create CODEL with target setting Test 78d1: Create CODEL with interval setting Test 238a: Create CODEL with ecn setting Test 939c: Create CODEL with ce_threshold setting Test 8380: Delete CODEL with valid handle Test 289c: Replace CODEL with limit setting Test 0648: Change CODEL with limit setting
Signed-off-by: Zhengchao Shao shaozhengchao@huawei.com --- tools/testing/selftests/tc-testing/config | 1 + .../tc-testing/tc-tests/qdiscs/codel.json | 211 ++++++++++++++++++ 2 files changed, 212 insertions(+) create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/codel.json
diff --git a/tools/testing/selftests/tc-testing/config b/tools/testing/selftests/tc-testing/config index e104e8ec30aa..a02f959abe66 100644 --- a/tools/testing/selftests/tc-testing/config +++ b/tools/testing/selftests/tc-testing/config @@ -14,6 +14,7 @@ CONFIG_NET_SCHED=y # CONFIG_NET_SCH_ATM=m CONFIG_NET_SCH_CHOKE=m +CONFIG_NET_SCH_CODEL=m CONFIG_NET_SCH_PRIO=m CONFIG_NET_SCH_INGRESS=m
diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/codel.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/codel.json new file mode 100644 index 000000000000..ea38099d48e5 --- /dev/null +++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/codel.json @@ -0,0 +1,211 @@ +[ + { + "id": "983a", + "name": "Create CODEL with default setting", + "category": [ + "qdisc", + "codel" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root codel", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc codel 1: root refcnt [0-9]+ limit 1000p target 5ms interval 100ms", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "38aa", + "name": "Create CODEL with limit packet setting", + "category": [ + "qdisc", + "codel" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root codel limit 1500", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc codel 1: root refcnt [0-9]+ limit 1500p target 5ms interval 100ms", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "9178", + "name": "Create CODEL with target setting", + "category": [ + "qdisc", + "codel" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root codel target 100ms", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc codel 1: root refcnt [0-9]+ limit 1000p target 100ms interval 100ms", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "78d1", + "name": "Create CODEL with interval setting", + "category": [ + "qdisc", + "codel" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root codel interval 20ms", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc codel 1: root refcnt [0-9]+ limit 1000p target 5ms interval 20ms", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "238a", + "name": "Create CODEL with ecn setting", + "category": [ + "qdisc", + "codel" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root codel ecn", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc codel 1: root refcnt [0-9]+ limit 1000p target 5ms interval 100ms ecn", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "939c", + "name": "Create CODEL with ce_threshold setting", + "category": [ + "qdisc", + "codel" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root codel ce_threshold 20ms", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc codel 1: root refcnt [0-9]+ limit 1000p target 5ms ce_threshold 20ms interval 100ms", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "8380", + "name": "Delete CODEL with valid handle", + "category": [ + "qdisc", + "codel" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root codel" + ], + "cmdUnderTest": "$TC qdisc del dev $DUMMY handle 1: root", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc codel 1: root refcnt [0-9]+ limit 1000p target 5ms interval 100ms", + "matchCount": "0", + "teardown": [ + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "289c", + "name": "Replace CODEL with limit setting", + "category": [ + "qdisc", + "codel" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root codel" + ], + "cmdUnderTest": "$TC qdisc replace dev $DUMMY handle 1: root codel limit 5000", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc codel 1: root refcnt [0-9]+ limit 5000p target 5ms interval 100ms", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "0648", + "name": "Change CODEL with limit setting", + "category": [ + "qdisc", + "codel" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root codel" + ], + "cmdUnderTest": "$TC qdisc change dev $DUMMY handle 1: root codel limit 100", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc codel 1: root refcnt [0-9]+ limit 100p target 5ms interval 100ms", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + } +]
Test 34ba: Create ETF with default setting Test 438f: Create ETF with delta nanos setting Test 9041: Create ETF with deadline_mode setting Test 9a0c: Create ETF with skip_sock_check setting Test 2093: Delete ETF with valid handle
Signed-off-by: Zhengchao Shao shaozhengchao@huawei.com --- tools/testing/selftests/tc-testing/config | 1 + .../tc-testing/tc-tests/qdiscs/etf.json | 117 ++++++++++++++++++ 2 files changed, 118 insertions(+) create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/etf.json
diff --git a/tools/testing/selftests/tc-testing/config b/tools/testing/selftests/tc-testing/config index a02f959abe66..058ef0bf9dad 100644 --- a/tools/testing/selftests/tc-testing/config +++ b/tools/testing/selftests/tc-testing/config @@ -15,6 +15,7 @@ CONFIG_NET_SCHED=y CONFIG_NET_SCH_ATM=m CONFIG_NET_SCH_CHOKE=m CONFIG_NET_SCH_CODEL=m +CONFIG_NET_SCH_ETF=m CONFIG_NET_SCH_PRIO=m CONFIG_NET_SCH_INGRESS=m
diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/etf.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/etf.json new file mode 100644 index 000000000000..0046d44bcd93 --- /dev/null +++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/etf.json @@ -0,0 +1,117 @@ +[ + { + "id": "34ba", + "name": "Create ETF with default setting", + "category": [ + "qdisc", + "etf" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root etf clockid CLOCK_TAI", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc etf 1: root refcnt [0-9]+ clockid TAI delta 0 offload off deadline_mode off skip_sock_check off", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "438f", + "name": "Create ETF with delta nanos setting", + "category": [ + "qdisc", + "etf" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root etf delta 100 clockid CLOCK_TAI", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc etf 1: root refcnt [0-9]+ clockid TAI delta 100 offload off deadline_mode off skip_sock_check off", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "9041", + "name": "Create ETF with deadline_mode setting", + "category": [ + "qdisc", + "etf" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root etf clockid CLOCK_TAI deadline_mode", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc etf 1: root refcnt [0-9]+ clockid TAI delta 0 offload off deadline_mode on skip_sock_check off", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "9a0c", + "name": "Create ETF with skip_sock_check setting", + "category": [ + "qdisc", + "etf" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root etf clockid CLOCK_TAI skip_sock_check", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc etf 1: root refcnt [0-9]+ clockid TAI delta 0 offload off deadline_mode off skip_sock_check on", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "2093", + "name": "Delete ETF with valid handle", + "category": [ + "qdisc", + "etf" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root etf clockid CLOCK_TAI" + ], + "cmdUnderTest": "$TC qdisc del dev $DUMMY handle 1: root", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc etf 1: root refcnt [0-9]+ clockid TAI delta 0 offload off deadline_mode off skip_sock_check off", + "matchCount": "0", + "teardown": [ + "$IP link del dev $DUMMY type dummy" + ] + } +]
Test 983b: Create FQ with default setting Test 38a1: Create FQ with limit packet setting Test 0a18: Create FQ with flow_limit setting Test 2390: Create FQ with quantum setting Test 845b: Create FQ with initial_quantum setting Test 9398: Create FQ with maxrate setting Test 342c: Create FQ with nopacing setting Test 6391: Create FQ with refill_delay setting Test 238b: Create FQ with low_rate_threshold setting Test 7582: Create FQ with orphan_mask setting Test 4894: Create FQ with timer_slack setting Test 324c: Create FQ with ce_threshold setting Test 424a: Create FQ with horizon time setting Test 89e1: Create FQ with horizon_cap setting Test 32e1: Delete FQ with valid handle Test 49b0: Replace FQ with limit setting Test 9478: Change FQ with limit setting
Signed-off-by: Zhengchao Shao shaozhengchao@huawei.com --- tools/testing/selftests/tc-testing/config | 1 + .../tc-testing/tc-tests/qdiscs/fq.json | 395 ++++++++++++++++++ 2 files changed, 396 insertions(+) create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/fq.json
diff --git a/tools/testing/selftests/tc-testing/config b/tools/testing/selftests/tc-testing/config index 058ef0bf9dad..eea77f9d6ba1 100644 --- a/tools/testing/selftests/tc-testing/config +++ b/tools/testing/selftests/tc-testing/config @@ -16,6 +16,7 @@ CONFIG_NET_SCH_ATM=m CONFIG_NET_SCH_CHOKE=m CONFIG_NET_SCH_CODEL=m CONFIG_NET_SCH_ETF=m +CONFIG_NET_SCH_FQ=m CONFIG_NET_SCH_PRIO=m CONFIG_NET_SCH_INGRESS=m
diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/fq.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/fq.json new file mode 100644 index 000000000000..8acb904d1419 --- /dev/null +++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/fq.json @@ -0,0 +1,395 @@ +[ + { + "id": "983b", + "name": "Create FQ with default setting", + "category": [ + "qdisc", + "fq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc fq 1: root refcnt [0-9]+ limit", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "38a1", + "name": "Create FQ with limit packet setting", + "category": [ + "qdisc", + "fq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq limit 3000", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc fq 1: root refcnt [0-9]+ limit 3000p", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "0a18", + "name": "Create FQ with flow_limit setting", + "category": [ + "qdisc", + "fq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq flow_limit 300", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc fq 1: root refcnt [0-9]+ limit 10000p flow_limit 300p", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "2390", + "name": "Create FQ with quantum setting", + "category": [ + "qdisc", + "fq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq quantum 9000", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc fq 1: root refcnt [0-9]+ limit 10000p flow_limit 100p buckets.*orphan_mask 1023 quantum 9000b", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "845b", + "name": "Create FQ with initial_quantum setting", + "category": [ + "qdisc", + "fq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq initial_quantum 900000", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc fq 1: root refcnt [0-9]+ limit 10000p flow_limit 100p buckets.*initial_quantum 900000b", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "9398", + "name": "Create FQ with maxrate setting", + "category": [ + "qdisc", + "fq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq maxrate 100000", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc fq 1: root refcnt [0-9]+ limit 10000p flow_limit 100p buckets.*maxrate 100Kbit", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "342c", + "name": "Create FQ with nopacing setting", + "category": [ + "qdisc", + "fq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq nopacing", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc fq 1: root refcnt [0-9]+ limit 10000p flow_limit 100p.*nopacing", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "6391", + "name": "Create FQ with refill_delay setting", + "category": [ + "qdisc", + "fq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq refill_delay 100ms", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc fq 1: root refcnt [0-9]+ limit 10000p flow_limit 100p.*refill_delay 100ms", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "238b", + "name": "Create FQ with low_rate_threshold setting", + "category": [ + "qdisc", + "fq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq low_rate_threshold 10000", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc fq 1: root refcnt [0-9]+ limit 10000p flow_limit 100p.*low_rate_threshold 10Kbit", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "7582", + "name": "Create FQ with orphan_mask setting", + "category": [ + "qdisc", + "fq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq orphan_mask 255", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc fq 1: root refcnt [0-9]+ limit 10000p flow_limit 100p.*orphan_mask 255", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "4894", + "name": "Create FQ with timer_slack setting", + "category": [ + "qdisc", + "fq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq timer_slack 100", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc fq 1: root refcnt [0-9]+ limit 10000p flow_limit 100p.*timer_slack 100ns", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "324c", + "name": "Create FQ with ce_threshold setting", + "category": [ + "qdisc", + "fq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq ce_threshold 100", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc fq 1: root refcnt [0-9]+ limit 10000p flow_limit 100p", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "424a", + "name": "Create FQ with horizon time setting", + "category": [ + "qdisc", + "fq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq horizon 100", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc fq 1: root refcnt [0-9]+ limit 10000p flow_limit 100p.*horizon 100us", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "89e1", + "name": "Create FQ with horizon_cap setting", + "category": [ + "qdisc", + "fq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq horizon_cap", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc fq 1: root refcnt [0-9]+ limit 10000p flow_limit 100p.*horizon_cap", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "32e1", + "name": "Delete FQ with valid handle", + "category": [ + "qdisc", + "fq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root fq" + ], + "cmdUnderTest": "$TC qdisc del dev $DUMMY handle 1: root", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc fq 1: root refcnt [0-9]+ limit 10000p", + "matchCount": "0", + "teardown": [ + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "49b0", + "name": "Replace FQ with limit setting", + "category": [ + "qdisc", + "fq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root fq" + ], + "cmdUnderTest": "$TC qdisc replace dev $DUMMY handle 1: root fq limit 5000", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc fq 1: root refcnt [0-9]+ limit 5000p", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "9478", + "name": "Change FQ with limit setting", + "category": [ + "qdisc", + "fq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root fq" + ], + "cmdUnderTest": "$TC qdisc change dev $DUMMY handle 1: root fq limit 100", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc fq 1: root refcnt [0-9]+ limit 100p", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + } +]
Test 8942: Create GRED with default setting Test 5783: Create GRED with grio setting Test 8a09: Create GRED with limit setting Test 48cb: Create GRED with ecn setting Test 763a: Change GRED setting Test 8309: Show GRED class
Signed-off-by: Zhengchao Shao shaozhengchao@huawei.com --- tools/testing/selftests/tc-testing/config | 1 + .../tc-testing/tc-tests/qdiscs/gred.json | 164 ++++++++++++++++++ 2 files changed, 165 insertions(+) create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/gred.json
diff --git a/tools/testing/selftests/tc-testing/config b/tools/testing/selftests/tc-testing/config index eea77f9d6ba1..d8db68440395 100644 --- a/tools/testing/selftests/tc-testing/config +++ b/tools/testing/selftests/tc-testing/config @@ -17,6 +17,7 @@ CONFIG_NET_SCH_CHOKE=m CONFIG_NET_SCH_CODEL=m CONFIG_NET_SCH_ETF=m CONFIG_NET_SCH_FQ=m +CONFIG_NET_SCH_GRED=m CONFIG_NET_SCH_PRIO=m CONFIG_NET_SCH_INGRESS=m
diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/gred.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/gred.json new file mode 100644 index 000000000000..013c8ee037a4 --- /dev/null +++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/gred.json @@ -0,0 +1,164 @@ +[ + { + "id": "8942", + "name": "Create GRED with default setting", + "category": [ + "qdisc", + "gred" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root gred setup vqs 10 default 1", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc gred 1: root refcnt [0-9]+ vqs 10 default 1", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "5783", + "name": "Create GRED with grio setting", + "category": [ + "qdisc", + "gred" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root gred setup vqs 10 default 1 grio", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc gred 1: root refcnt [0-9]+ vqs 10 default 1.*grio", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "8a09", + "name": "Create GRED with limit setting", + "category": [ + "qdisc", + "gred" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root gred setup vqs 10 default 1 limit 1000", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc gred 1: root refcnt [0-9]+ vqs 10 default 1 limit 1000b", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "48ca", + "name": "Create GRED with ecn setting", + "category": [ + "qdisc", + "gred" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root gred setup vqs 10 default 2 ecn", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc gred 1: root refcnt [0-9]+ vqs 10 default 2.*ecn", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "48cb", + "name": "Create GRED with harddrop setting", + "category": [ + "qdisc", + "gred" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root gred setup vqs 10 default 2 harddrop", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc gred 1: root refcnt [0-9]+ vqs 10 default 2.*harddrop", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "763a", + "name": "Change GRED setting", + "category": [ + "qdisc", + "gred" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root gred setup vqs 10 default 1" + ], + "cmdUnderTest": "$TC qdisc change dev $DUMMY handle 1: root gred limit 60KB min 15K max 25K burst 64 avpkt 1500 bandwidth 10Mbit DP 1 probability 0.1", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc gred 1: root refcnt [0-9]+ vqs 10 default 1 limit.*vq 1 prio [0-9]+ limit 60Kb min 15Kb max 25Kb", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "8309", + "name": "Show GRED class", + "category": [ + "qdisc", + "gred" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root gred setup vqs 10 default 1", + "expExitCode": "0", + "verifyCmd": "$TC class show dev $DUMMY", + "matchPattern": "class gred 1:", + "matchCount": "0", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + } +]
Test 4812: Create HHF with default setting Test 8a92: Create HHF with limit setting Test 3491: Create HHF with quantum setting Test ba04: Create HHF with reset_timeout setting Test 4238: Create HHF with admit_bytes setting Test 839f: Create HHF with evict_timeout setting Test a044: Create HHF with non_hh_weight setting Test 32f9: Change HHF with limit setting Test 385e: Show HHF class
Signed-off-by: Zhengchao Shao shaozhengchao@huawei.com --- tools/testing/selftests/tc-testing/config | 1 + .../tc-testing/tc-tests/qdiscs/hhf.json | 210 ++++++++++++++++++ 2 files changed, 211 insertions(+) create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/hhf.json
diff --git a/tools/testing/selftests/tc-testing/config b/tools/testing/selftests/tc-testing/config index d8db68440395..86d57d599d67 100644 --- a/tools/testing/selftests/tc-testing/config +++ b/tools/testing/selftests/tc-testing/config @@ -18,6 +18,7 @@ CONFIG_NET_SCH_CODEL=m CONFIG_NET_SCH_ETF=m CONFIG_NET_SCH_FQ=m CONFIG_NET_SCH_GRED=m +CONFIG_NET_SCH_HHF=m CONFIG_NET_SCH_PRIO=m CONFIG_NET_SCH_INGRESS=m
diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/hhf.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/hhf.json new file mode 100644 index 000000000000..949f6e5de902 --- /dev/null +++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/hhf.json @@ -0,0 +1,210 @@ +[ + { + "id": "4812", + "name": "Create HHF with default setting", + "category": [ + "qdisc", + "hhf" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root hhf", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc hhf 1: root refcnt [0-9]+.*hh_limit 2048 reset_timeout 40ms admit_bytes 128Kb evict_timeout 1s non_hh_weight 2", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "8a92", + "name": "Create HHF with limit setting", + "category": [ + "qdisc", + "hhf" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root hhf limit 1500", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc hhf 1: root refcnt [0-9]+ limit 1500p.*hh_limit 2048 reset_timeout 40ms admit_bytes 128Kb evict_timeout 1s non_hh_weight 2", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "3491", + "name": "Create HHF with quantum setting", + "category": [ + "qdisc", + "hhf" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root hhf quantum 9000", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc hhf 1: root refcnt [0-9]+.*quantum 9000b hh_limit 2048 reset_timeout 40ms admit_bytes 128Kb evict_timeout 1s non_hh_weight 2", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "ba04", + "name": "Create HHF with reset_timeout setting", + "category": [ + "qdisc", + "hhf" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root hhf reset_timeout 100ms", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc hhf 1: root refcnt [0-9]+.*hh_limit 2048 reset_timeout 100ms admit_bytes 128Kb evict_timeout 1s non_hh_weight 2", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "4238", + "name": "Create HHF with admit_bytes setting", + "category": [ + "qdisc", + "hhf" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root hhf admit_bytes 100000", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc hhf 1: root refcnt [0-9]+.*hh_limit 2048 reset_timeout 40ms admit_bytes 100000b evict_timeout 1s non_hh_weight 2", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "839f", + "name": "Create HHF with evict_timeout setting", + "category": [ + "qdisc", + "hhf" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root hhf evict_timeout 0.5s", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc hhf 1: root refcnt [0-9]+.*hh_limit 2048 reset_timeout 40ms admit_bytes 128Kb evict_timeout 500ms non_hh_weight 2", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "a044", + "name": "Create HHF with non_hh_weight setting", + "category": [ + "qdisc", + "hhf" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root hhf non_hh_weight 10", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc hhf 1: root refcnt [0-9]+.*hh_limit 2048 reset_timeout 40ms admit_bytes 128Kb evict_timeout 1s non_hh_weight 10", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "32f9", + "name": "Change HHF with limit setting", + "category": [ + "qdisc", + "hhf" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root hhf" + ], + "cmdUnderTest": "$TC qdisc change dev $DUMMY handle 1: root hhf limit 1500", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc hhf 1: root refcnt [0-9]+ limit 1500p.*hh_limit 2048 reset_timeout 40ms admit_bytes 128Kb evict_timeout 1s non_hh_weight 2", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "385e", + "name": "Show HHF class", + "category": [ + "qdisc", + "hhf" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root hhf", + "expExitCode": "0", + "verifyCmd": "$TC class show dev $DUMMY", + "matchPattern": "class hhf 1:", + "matchCount": "0", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + } +]
Test 900c: Create pfifo_fast with default setting Test 7470: Dump pfifo_fast stats Test b974: Replace pfifo_fast with different handle Test 3240: Delete pfifo_fast with valid handle Test 4385: Delete pfifo_fast with invalid handle
Signed-off-by: Zhengchao Shao shaozhengchao@huawei.com --- .../tc-tests/qdiscs/pfifo_fast.json | 119 ++++++++++++++++++ 1 file changed, 119 insertions(+) create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/pfifo_fast.json
diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/pfifo_fast.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/pfifo_fast.json new file mode 100644 index 000000000000..ab53238f4c5a --- /dev/null +++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/pfifo_fast.json @@ -0,0 +1,119 @@ +[ + { + "id": "900c", + "name": "Create pfifo_fast with default setting", + "category": [ + "qdisc", + "pfifo_fast" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root pfifo_fast", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc pfifo_fast 1: root refcnt [0-9]+ bands 3 priomap", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "7470", + "name": "Dump pfifo_fast stats", + "category": [ + "qdisc", + "pfifo_fast" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root pfifo_fast", + "expExitCode": "0", + "verifyCmd": "$TC -s qdisc show dev $DUMMY", + "matchPattern": "Sent.*bytes.*pkt \(dropped.*overlimits.*requeues .*\)", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "b974", + "name": "Replace pfifo_fast with different handle", + "category": [ + "qdisc", + "pfifo_fast" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root pfifo_fast" + ], + "cmdUnderTest": "$TC qdisc replace dev $DUMMY handle 2: root pfifo_fast", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc pfifo_fast 2: root refcnt [0-9]+ bands 3 priomap", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 2: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "3240", + "name": "Delete pfifo_fast with valid handle", + "category": [ + "qdisc", + "pfifo_fast" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root pfifo_fast" + ], + "cmdUnderTest": "$TC qdisc del dev $DUMMY handle 1: root", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc pfifo_fast 1: root refcnt [0-9]+ bands 3 priomap", + "matchCount": "0", + "teardown": [ + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "4385", + "name": "Delete pfifo_fast with invalid handle", + "category": [ + "qdisc", + "pfifo_fast" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root pfifo_fast" + ], + "cmdUnderTest": "$TC qdisc del dev $DUMMY handle 2: root", + "expExitCode": "2", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc pfifo_fast 1: root refcnt [0-9]+ bands 3 priomap", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + } +]
Test 3289: Create PLUG with default setting Test 0917: Create PLUG with block setting Test 483b: Create PLUG with release setting Test 4995: Create PLUG with release_indefinite setting Test 389c: Create PLUG with limit setting Test 384a: Delete PLUG with valid handle Test 439a: Replace PLUG with limit setting Test 9831: Change PLUG with limit setting
Signed-off-by: Zhengchao Shao shaozhengchao@huawei.com --- tools/testing/selftests/tc-testing/config | 1 + .../tc-testing/tc-tests/qdiscs/plug.json | 188 ++++++++++++++++++ 2 files changed, 189 insertions(+) create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/plug.json
diff --git a/tools/testing/selftests/tc-testing/config b/tools/testing/selftests/tc-testing/config index 86d57d599d67..2a85ecc4a241 100644 --- a/tools/testing/selftests/tc-testing/config +++ b/tools/testing/selftests/tc-testing/config @@ -19,6 +19,7 @@ CONFIG_NET_SCH_ETF=m CONFIG_NET_SCH_FQ=m CONFIG_NET_SCH_GRED=m CONFIG_NET_SCH_HHF=m +CONFIG_NET_SCH_PLUG=m CONFIG_NET_SCH_PRIO=m CONFIG_NET_SCH_INGRESS=m
diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/plug.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/plug.json new file mode 100644 index 000000000000..6454518af178 --- /dev/null +++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/plug.json @@ -0,0 +1,188 @@ +[ + { + "id": "3289", + "name": "Create PLUG with default setting", + "category": [ + "qdisc", + "plug" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root plug", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc plug 1: root refcnt", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "0917", + "name": "Create PLUG with block setting", + "category": [ + "qdisc", + "plug" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root plug block", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc plug 1: root refcnt", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "483b", + "name": "Create PLUG with release setting", + "category": [ + "qdisc", + "plug" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root plug release", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc plug 1: root refcnt", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "4995", + "name": "Create PLUG with release_indefinite setting", + "category": [ + "qdisc", + "plug" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root plug release_indefinite", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc plug 1: root refcnt", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "389c", + "name": "Create PLUG with limit setting", + "category": [ + "qdisc", + "plug" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root plug limit 100", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc plug 1: root refcnt", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "384a", + "name": "Delete PLUG with valid handle", + "category": [ + "qdisc", + "plug" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root plug" + ], + "cmdUnderTest": "$TC qdisc del dev $DUMMY handle 1: root", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc plug 1: root refcnt", + "matchCount": "0", + "teardown": [ + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "439a", + "name": "Replace PLUG with limit setting", + "category": [ + "qdisc", + "plug" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root plug" + ], + "cmdUnderTest": "$TC qdisc replace dev $DUMMY handle 1: root plug limit 1000", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc plug 1: root refcnt", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "9831", + "name": "Change PLUG with limit setting", + "category": [ + "qdisc", + "plug" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root plug" + ], + "cmdUnderTest": "$TC qdisc change dev $DUMMY handle 1: root plug limit 1000", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc plug 1: root refcnt", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + } +]
Test 3294: Create SFB with default setting Test 430a: Create SFB with rehash setting Test 3410: Create SFB with db setting Test 49a0: Create SFB with limit setting Test 1241: Create SFB with max setting Test 3249: Create SFB with target setting Test 30a9: Create SFB with increment setting Test 239a: Create SFB with decrement setting Test 9301: Create SFB with penalty_rate setting Test 2a01: Create SFB with penalty_burst setting Test 3209: Change SFB with rehash setting Test 5447: Show SFB class
Signed-off-by: Zhengchao Shao shaozhengchao@huawei.com --- tools/testing/selftests/tc-testing/config | 1 + .../tc-testing/tc-tests/qdiscs/sfb.json | 279 ++++++++++++++++++ 2 files changed, 280 insertions(+) create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfb.json
diff --git a/tools/testing/selftests/tc-testing/config b/tools/testing/selftests/tc-testing/config index 2a85ecc4a241..5289c788d755 100644 --- a/tools/testing/selftests/tc-testing/config +++ b/tools/testing/selftests/tc-testing/config @@ -22,6 +22,7 @@ CONFIG_NET_SCH_HHF=m CONFIG_NET_SCH_PLUG=m CONFIG_NET_SCH_PRIO=m CONFIG_NET_SCH_INGRESS=m +CONFIG_NET_SCH_SFB=m
# # Classification diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfb.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfb.json new file mode 100644 index 000000000000..ba2f5e79cdbf --- /dev/null +++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfb.json @@ -0,0 +1,279 @@ +[ + { + "id": "3294", + "name": "Create SFB with default setting", + "category": [ + "qdisc", + "sfb" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfb", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc sfb 1: root refcnt [0-9]+ rehash 600s db 60s", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "430a", + "name": "Create SFB with rehash setting", + "category": [ + "qdisc", + "sfb" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfb rehash 60", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc sfb 1: root refcnt [0-9]+ rehash 60ms db 60s", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "3410", + "name": "Create SFB with db setting", + "category": [ + "qdisc", + "sfb" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfb db 10", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc sfb 1: root refcnt [0-9]+ rehash 600s db 10ms", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "49a0", + "name": "Create SFB with limit setting", + "category": [ + "qdisc", + "sfb" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfb limit 100", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc sfb 1: root refcnt [0-9]+ rehash 600s db 60s limit 100p", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "1241", + "name": "Create SFB with max setting", + "category": [ + "qdisc", + "sfb" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfb max 100", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc sfb 1: root refcnt 2 rehash 600s db 60s.*max 100p", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "3249", + "name": "Create SFB with target setting", + "category": [ + "qdisc", + "sfb" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfb target 100", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc sfb 1: root refcnt 2 rehash 600s db 60s.*target 100p", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "30a9", + "name": "Create SFB with increment setting", + "category": [ + "qdisc", + "sfb" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfb increment 0.1", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc sfb 1: root refcnt 2 rehash 600s db 60s.*increment 0.1", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "239a", + "name": "Create SFB with decrement setting", + "category": [ + "qdisc", + "sfb" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfb decrement 0.1", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc sfb 1: root refcnt 2 rehash 600s db 60s.*decrement 0.1", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "9301", + "name": "Create SFB with penalty_rate setting", + "category": [ + "qdisc", + "sfb" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfb penalty_rate 4000", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc sfb 1: root refcnt 2 rehash 600s db 60s.*penalty_rate 4000pps", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "2a01", + "name": "Create SFB with penalty_burst setting", + "category": [ + "qdisc", + "sfb" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfb penalty_burst 64", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc sfb 1: root refcnt 2 rehash 600s db 60s.*penalty_burst 64p", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "3209", + "name": "Change SFB with rehash setting", + "category": [ + "qdisc", + "sfb" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root sfb penalty_burst 64" + ], + "cmdUnderTest": "$TC qdisc change dev $DUMMY handle 1: root sfb rehash 100", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc sfb 1: root refcnt 2 rehash 100ms db 60s", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "5447", + "name": "Show SFB class", + "category": [ + "qdisc", + "sfb" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfb", + "expExitCode": "0", + "verifyCmd": "$TC class show dev $DUMMY", + "matchPattern": "class sfb 1:", + "matchCount": "0", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + } +]
Test 7482: Create SFQ with default setting Test c186: Create SFQ with limit setting Test ae23: Create SFQ with perturb setting Test a430: Create SFQ with quantum setting Test 4539: Create SFQ with divisor setting Test b089: Create SFQ with flows setting Test 99a0: Create SFQ with depth setting Test 7389: Create SFQ with headdrop setting Test 6472: Create SFQ with redflowlimit setting Test 8929: Show SFQ class
Signed-off-by: Zhengchao Shao shaozhengchao@huawei.com --- tools/testing/selftests/tc-testing/config | 1 + .../tc-testing/tc-tests/qdiscs/sfq.json | 232 ++++++++++++++++++ 2 files changed, 233 insertions(+) create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfq.json
diff --git a/tools/testing/selftests/tc-testing/config b/tools/testing/selftests/tc-testing/config index 5289c788d755..bc0ef6eb515a 100644 --- a/tools/testing/selftests/tc-testing/config +++ b/tools/testing/selftests/tc-testing/config @@ -23,6 +23,7 @@ CONFIG_NET_SCH_PLUG=m CONFIG_NET_SCH_PRIO=m CONFIG_NET_SCH_INGRESS=m CONFIG_NET_SCH_SFB=m +CONFIG_NET_SCH_SFQ=m
# # Classification diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfq.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfq.json new file mode 100644 index 000000000000..b6be718a174a --- /dev/null +++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfq.json @@ -0,0 +1,232 @@ +[ + { + "id": "7482", + "name": "Create SFQ with default setting", + "category": [ + "qdisc", + "sfq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfq", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc sfq 1: root refcnt [0-9]+ limit 127p quantum.*depth 127 divisor 1024", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "c186", + "name": "Create SFQ with limit setting", + "category": [ + "qdisc", + "sfq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfq limit 8", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc sfq 1: root refcnt [0-9]+ limit 8p", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "ae23", + "name": "Create SFQ with perturb setting", + "category": [ + "qdisc", + "sfq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfq perturb 10", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "depth 127 divisor 1024 perturb 10sec", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "a430", + "name": "Create SFQ with quantum setting", + "category": [ + "qdisc", + "sfq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfq quantum 9000", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc sfq 1: root refcnt [0-9]+ limit 127p quantum 9000b depth 127 divisor 1024", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "4539", + "name": "Create SFQ with divisor setting", + "category": [ + "qdisc", + "sfq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfq divisor 512", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc sfq 1: root refcnt [0-9]+ limit 127p quantum 1514b depth 127 divisor 512", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "b089", + "name": "Create SFQ with flows setting", + "category": [ + "qdisc", + "sfq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfq flows 20", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc sfq 1: root refcnt", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "99a0", + "name": "Create SFQ with depth setting", + "category": [ + "qdisc", + "sfq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfq depth 64", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc sfq 1: root refcnt [0-9]+ limit 127p quantum 1514b depth 64 divisor 1024", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "7389", + "name": "Create SFQ with headdrop setting", + "category": [ + "qdisc", + "sfq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfq headdrop", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc sfq 1: root refcnt [0-9]+ limit 127p quantum 1514b depth 127 headdrop divisor 1024", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "6472", + "name": "Create SFQ with redflowlimit setting", + "category": [ + "qdisc", + "sfq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfq redflowlimit 100000 min 8000 max 60000 probability 0.20 ecn headdrop", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc sfq 1: root refcnt [0-9]+ limit 127p quantum 1514b depth 127 headdrop divisor 1024 ewma 6 min 8000b max 60000b probability 0.2 ecn", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "8929", + "name": "Show SFQ class", + "category": [ + "qdisc", + "sfq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfq", + "expExitCode": "0", + "verifyCmd": "$TC class show dev $DUMMY", + "matchPattern": "class sfq 1:", + "matchCount": "0", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + } +]
Test 283e: Create skbprio with default setting Test c086: Create skbprio with limit setting Test 6733: Change skbprio with limit setting Test 2958: Show skbprio class
Signed-off-by: Zhengchao Shao shaozhengchao@huawei.com --- tools/testing/selftests/tc-testing/config | 1 + .../tc-testing/tc-tests/qdiscs/skbprio.json | 95 +++++++++++++++++++ 2 files changed, 96 insertions(+) create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/skbprio.json
diff --git a/tools/testing/selftests/tc-testing/config b/tools/testing/selftests/tc-testing/config index bc0ef6eb515a..22729f244c6e 100644 --- a/tools/testing/selftests/tc-testing/config +++ b/tools/testing/selftests/tc-testing/config @@ -24,6 +24,7 @@ CONFIG_NET_SCH_PRIO=m CONFIG_NET_SCH_INGRESS=m CONFIG_NET_SCH_SFB=m CONFIG_NET_SCH_SFQ=m +CONFIG_NET_SCH_SKBPRIO=m
# # Classification diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/skbprio.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/skbprio.json new file mode 100644 index 000000000000..5766045c9d33 --- /dev/null +++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/skbprio.json @@ -0,0 +1,95 @@ +[ + { + "id": "283e", + "name": "Create skbprio with default setting", + "category": [ + "qdisc", + "skbprio" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root skbprio", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc skbprio 1: root refcnt [0-9]+ limit 64", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "c086", + "name": "Create skbprio with limit setting", + "category": [ + "qdisc", + "skbprio" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root skbprio limit 1", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc skbprio 1: root refcnt [0-9]+ limit 1", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "6733", + "name": "Change skbprio with limit setting", + "category": [ + "qdisc", + "skbprio" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root skbprio" + ], + "cmdUnderTest": "$TC qdisc change dev $DUMMY handle 1: root skbprio limit 32", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc skbprio 1: root refcnt [0-9]+ limit 32", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "2958", + "name": "Show skbprio class", + "category": [ + "qdisc", + "skbprio" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root skbprio", + "expExitCode": "0", + "verifyCmd": "$TC class show dev $DUMMY", + "matchPattern": "class skbprio 1:", + "matchCount": "64", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + } +]
Test ba39: Add taprio Qdisc to multi-queue device (8 queues) Test 9462: Add taprio Qdisc with multiple sched-entry Test 8d92: Add taprio Qdisc with txtime-delay Test d092: Delete taprio Qdisc with valid handle Test 8471: Show taprio class Test 0a85: Add taprio Qdisc to single-queue device
Signed-off-by: Zhengchao Shao shaozhengchao@huawei.com --- tools/testing/selftests/tc-testing/config | 1 + .../tc-testing/tc-tests/qdiscs/taprio.json | 135 ++++++++++++++++++ 2 files changed, 136 insertions(+) create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/taprio.json
diff --git a/tools/testing/selftests/tc-testing/config b/tools/testing/selftests/tc-testing/config index 22729f244c6e..d6063918e2c3 100644 --- a/tools/testing/selftests/tc-testing/config +++ b/tools/testing/selftests/tc-testing/config @@ -25,6 +25,7 @@ CONFIG_NET_SCH_INGRESS=m CONFIG_NET_SCH_SFB=m CONFIG_NET_SCH_SFQ=m CONFIG_NET_SCH_SKBPRIO=m +CONFIG_NET_SCH_TAPRIO=m
# # Classification diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/taprio.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/taprio.json new file mode 100644 index 000000000000..a44455372646 --- /dev/null +++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/taprio.json @@ -0,0 +1,135 @@ +[ + { + "id": "ba39", + "name": "Add taprio Qdisc to multi-queue device (8 queues)", + "category": [ + "qdisc", + "taprio" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "echo "1 1 8" > /sys/bus/netdevsim/new_device" + ], + "cmdUnderTest": "$TC qdisc add dev $ETH root handle 1: taprio num_tc 3 map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 queues 1@0 1@0 1@0 base-time 1000000000 sched-entry S 01 300000 flags 0x1 clockid CLOCK_TAI", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $ETH", + "matchPattern": "qdisc taprio 1: root refcnt [0-9]+ tc 3 map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2", + "matchCount": "1", + "teardown": [ + "echo "1" > /sys/bus/netdevsim/del_device" + ] + }, + { + "id": "9462", + "name": "Add taprio Qdisc with multiple sched-entry", + "category": [ + "qdisc", + "taprio" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "echo "1 1 8" > /sys/bus/netdevsim/new_device" + ], + "cmdUnderTest": "$TC qdisc add dev $ETH root handle 1: taprio num_tc 3 map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 queues 1@0 1@0 1@0 base-time 1000000000 sched-entry S 01 300000 sched-entry S 03 300000 sched-entry S 04 400000 flags 0x1 clockid CLOCK_TAI", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $ETH", + "matchPattern": "index [0-9]+ cmd S gatemask 0x[0-9]+ interval [0-9]+00000", + "matchCount": "3", + "teardown": [ + "echo "1" > /sys/bus/netdevsim/del_device" + ] + }, + { + "id": "8d92", + "name": "Add taprio Qdisc with txtime-delay", + "category": [ + "qdisc", + "taprio" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "echo "1 1 8" > /sys/bus/netdevsim/new_device" + ], + "cmdUnderTest": "$TC qdisc add dev $ETH root handle 1: taprio num_tc 3 map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 queues 1@0 1@0 1@0 base-time 1000000000 sched-entry S 01 300000 flags 0x1 txtime-delay 500000 clockid CLOCK_TAI", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $ETH", + "matchPattern": "clockid TAI flags 0x1 txtime delay 500000", + "matchCount": "1", + "teardown": [ + "echo "1" > /sys/bus/netdevsim/del_device" + ] + }, + { + "id": "d092", + "name": "Delete taprio Qdisc with valid handle", + "category": [ + "qdisc", + "taprio" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "echo "1 1 8" > /sys/bus/netdevsim/new_device", + "$TC qdisc add dev $ETH root handle 1: taprio num_tc 3 map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 queues 1@0 1@0 1@0 base-time 1000000000 sched-entry S 01 300000 flags 0x1 clockid CLOCK_TAI" + ], + "cmdUnderTest": "$TC qdisc del dev $ETH root handle 1:", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $ETH", + "matchPattern": "qdisc taprio 1: root refcnt", + "matchCount": "0", + "teardown": [ + "echo "1" > /sys/bus/netdevsim/del_device" + ] + }, + { + "id": "8471", + "name": "Show taprio class", + "category": [ + "qdisc", + "taprio" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "echo "1 1 8" > /sys/bus/netdevsim/new_device" + ], + "cmdUnderTest": "$TC qdisc add dev $ETH root handle 1: taprio num_tc 3 map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 queues 1@0 1@0 1@0 base-time 1000000000 sched-entry S 01 300000 flags 0x1 clockid CLOCK_TAI", + "expExitCode": "0", + "verifyCmd": "$TC class show dev $ETH", + "matchPattern": "class taprio 1:[0-9]+ root leaf 1:", + "matchCount": "8", + "teardown": [ + "echo "1" > /sys/bus/netdevsim/del_device" + ] + }, + { + "id": "0a85", + "name": "Add taprio Qdisc to single-queue device", + "category": [ + "qdisc", + "taprio" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "echo "1 1" > /sys/bus/netdevsim/new_device" + ], + "cmdUnderTest": "$TC qdisc add dev $ETH root handle 1: taprio num_tc 3 map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 queues 1@0 1@0 1@0 base-time 1000000000 sched-entry S 01 300000 flags 0x1 clockid CLOCK_TAI", + "expExitCode": "2", + "verifyCmd": "$TC qdisc show dev $ETH", + "matchPattern": "qdisc taprio 1: root refcnt", + "matchCount": "0", + "teardown": [ + "echo "1" > /sys/bus/netdevsim/del_device" + ] + } +]
Test 6430: Create TBF with default setting Test 0518: Create TBF with mtu setting Test 320a: Create TBF with peakrate setting Test 239b: Create TBF with latency setting Test c975: Create TBF with overhead setting Test 948c: Create TBF with linklayer setting Test 3549: Replace TBF with mtu Test f948: Change TBF with latency time Test 2348: Show TBF class
Signed-off-by: Zhengchao Shao shaozhengchao@huawei.com --- tools/testing/selftests/tc-testing/config | 1 + .../tc-testing/tc-tests/qdiscs/tbf.json | 211 ++++++++++++++++++ 2 files changed, 212 insertions(+) create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/tbf.json
diff --git a/tools/testing/selftests/tc-testing/config b/tools/testing/selftests/tc-testing/config index d6063918e2c3..f8e5e1428bac 100644 --- a/tools/testing/selftests/tc-testing/config +++ b/tools/testing/selftests/tc-testing/config @@ -26,6 +26,7 @@ CONFIG_NET_SCH_SFB=m CONFIG_NET_SCH_SFQ=m CONFIG_NET_SCH_SKBPRIO=m CONFIG_NET_SCH_TAPRIO=m +CONFIG_NET_SCH_TBF=m
# # Classification diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/tbf.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/tbf.json new file mode 100644 index 000000000000..a4b3dfe51ff5 --- /dev/null +++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/tbf.json @@ -0,0 +1,211 @@ +[ + { + "id": "6430", + "name": "Create TBF with default setting", + "category": [ + "qdisc", + "tbf" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root tbf limit 1000 burst 1500 rate 10000", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc tbf 1: root refcnt [0-9]+ rate 10Kbit burst 1500b limit 1000b", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "0518", + "name": "Create TBF with mtu setting", + "category": [ + "qdisc", + "tbf" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root tbf limit 1000 burst 1500 rate 20000 mtu 2048", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc tbf 1: root refcnt [0-9]+ rate 20Kbit burst 1500b limit 1000b", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "320a", + "name": "Create TBF with peakrate setting", + "category": [ + "qdisc", + "tbf" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root tbf limit 1000 burst 1500 rate 20000 mtu 1510 peakrate 30000", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc tbf 1: root refcnt [0-9]+ rate 20Kbit burst 1500b peakrate 30Kbit minburst.*limit 1000b", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "239b", + "name": "Create TBF with latency setting", + "category": [ + "qdisc", + "tbf" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root tbf burst 1500 rate 20000 latency 100ms", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc tbf 1: root refcnt [0-9]+ rate 20Kbit burst 1500b lat 100ms", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "c975", + "name": "Create TBF with overhead setting", + "category": [ + "qdisc", + "tbf" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root tbf limit 1000 burst 1500 rate 20000 overhead 300", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc tbf 1: root refcnt [0-9]+ rate 20Kbit burst 1800b limit 1000b overhead 300", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "948c", + "name": "Create TBF with linklayer setting", + "category": [ + "qdisc", + "tbf" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root tbf limit 1000 burst 1500 rate 20000 linklayer atm", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc tbf 1: root refcnt [0-9]+ rate 20Kbit burst 1696b limit 1000b linklayer atm", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "3549", + "name": "Replace TBF with mtu", + "category": [ + "qdisc", + "tbf" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root tbf limit 1000 burst 1500 rate 20000 linklayer atm" + ], + "cmdUnderTest": "$TC qdisc replace dev $DUMMY handle 1: root tbf limit 1000 burst 1500 rate 20000 linklayer ethernet", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc tbf 1: root refcnt [0-9]+ rate 20Kbit burst 1500b limit 1000b", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "f948", + "name": "Change TBF with latency time", + "category": [ + "qdisc", + "tbf" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root tbf burst 1500 rate 20000 latency 10ms" + ], + "cmdUnderTest": "$TC qdisc change dev $DUMMY handle 1: root tbf burst 1500 rate 20000 latency 200ms", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc tbf 1: root refcnt [0-9]+ rate 20Kbit burst 1500b lat 200ms", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "2348", + "name": "Show TBF class", + "category": [ + "qdisc", + "tbf" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root tbf limit 1000 burst 1500 rate 10000", + "expExitCode": "0", + "verifyCmd": "$TC class show dev $DUMMY", + "matchPattern": "class tbf.*parent 1:", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + } +]
Test 84a0: Create TEQL with default setting Test 7734: Create TEQL with multiple device Test 34a9: Delete TEQL with valid handle Test 6289: Show TEQL stats
Signed-off-by: Zhengchao Shao shaozhengchao@huawei.com --- tools/testing/selftests/tc-testing/config | 1 + .../tc-testing/tc-tests/qdiscs/teql.json | 97 +++++++++++++++++++ 2 files changed, 98 insertions(+) create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/teql.json
diff --git a/tools/testing/selftests/tc-testing/config b/tools/testing/selftests/tc-testing/config index f8e5e1428bac..2b2c2a835757 100644 --- a/tools/testing/selftests/tc-testing/config +++ b/tools/testing/selftests/tc-testing/config @@ -27,6 +27,7 @@ CONFIG_NET_SCH_SFQ=m CONFIG_NET_SCH_SKBPRIO=m CONFIG_NET_SCH_TAPRIO=m CONFIG_NET_SCH_TBF=m +CONFIG_NET_SCH_TEQL=m
# # Classification diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/teql.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/teql.json new file mode 100644 index 000000000000..0082be0e93ac --- /dev/null +++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/teql.json @@ -0,0 +1,97 @@ +[ + { + "id": "84a0", + "name": "Create TEQL with default setting", + "category": [ + "qdisc", + "teql" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root teql0", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc teql0 1: root refcnt", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "7734", + "name": "Create TEQL with multiple device", + "category": [ + "qdisc", + "teql" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "echo "1 1 4" > /sys/bus/netdevsim/new_device", + "$TC qdisc add dev $ETH root handle 1: teql0" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root teql0", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc teql0 1: root refcnt", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "echo "1" > /sys/bus/netdevsim/del_device", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "34a9", + "name": "Delete TEQL with valid handle", + "category": [ + "qdisc", + "teql" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root teql0" + ], + "cmdUnderTest": "$TC qdisc del dev $DUMMY handle 1: root", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc teql0 1: root refcnt", + "matchCount": "0", + "teardown": [ + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "6289", + "name": "Show TEQL stats", + "category": [ + "qdisc", + "teql" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root teql0", + "expExitCode": "0", + "verifyCmd": "$TC -s qdisc show dev $DUMMY", + "matchPattern": "qdisc teql0 1: root refcnt", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + } +]
Hello:
This series was applied to netdev/net-next.git (master) by David S. Miller davem@davemloft.net:
On Sat, 24 Sep 2022 10:51:42 +0800 you wrote:
For this patchset, test cases of the qdisc modules are added to the tc-testing test suite.
Last, thanks to Victor for testing and suggestion.
After a test case is added locally, the test result is as follows:
[...]
Here is the summary with links: - [net-next,v3,01/15] selftests/tc-testing: add selftests for atm qdisc https://git.kernel.org/netdev/net-next/c/0335833b10cd - [net-next,v3,02/15] selftests/tc-testing: add selftests for choke qdisc https://git.kernel.org/netdev/net-next/c/99e0f78d6bdd - [net-next,v3,03/15] selftests/tc-testing: add selftests for codel qdisc https://git.kernel.org/netdev/net-next/c/412233b1f7e7 - [net-next,v3,04/15] selftests/tc-testing: add selftests for etf qdisc https://git.kernel.org/netdev/net-next/c/fa4b3e9f057b - [net-next,v3,05/15] selftests/tc-testing: add selftests for fq qdisc https://git.kernel.org/netdev/net-next/c/9e274718cc05 - [net-next,v3,06/15] selftests/tc-testing: add selftests for gred qdisc https://git.kernel.org/netdev/net-next/c/a4a8d3562b07 - [net-next,v3,07/15] selftests/tc-testing: add selftests for hhf qdisc https://git.kernel.org/netdev/net-next/c/225aeb62fe58 - [net-next,v3,08/15] selftests/tc-testing: add selftests for pfifo_fast qdisc https://git.kernel.org/netdev/net-next/c/379a6509452e - [net-next,v3,09/15] selftests/tc-testing: add selftests for plug qdisc https://git.kernel.org/netdev/net-next/c/7d0b4b0ccb15 - [net-next,v3,10/15] selftests/tc-testing: add selftests for sfb qdisc https://git.kernel.org/netdev/net-next/c/6ad92dc56fca - [net-next,v3,11/15] selftests/tc-testing: add selftests for sfq qdisc https://git.kernel.org/netdev/net-next/c/0158f65bfbdd - [net-next,v3,12/15] selftests/tc-testing: add selftests for skbprio qdisc https://git.kernel.org/netdev/net-next/c/c5a2d86b9228 - [net-next,v3,13/15] selftests/tc-testing: add selftests for taprio qdisc https://git.kernel.org/netdev/net-next/c/8a3b3667ddbd - [net-next,v3,14/15] selftests/tc-testing: add selftests for tbf qdisc https://git.kernel.org/netdev/net-next/c/10835be3f0f7 - [net-next,v3,15/15] selftests/tc-testing: add selftests for teql qdisc https://git.kernel.org/netdev/net-next/c/cc62fbe114c9
You are awesome, thank you!
linux-kselftest-mirror@lists.linaro.org
-
patchwork-bot+netdevbpf＠kernel.org -
Zhengchao Shao