After a few years of increasing test coverage in the MPTCP selftests, we realised [1] the last version of the selftests is supposed to run on old kernels without issues.
Supporting older versions is not that easy for this MPTCP case: these selftests are often validating the internals by checking packets that are exchanged, when some MIB counters are incremented after some actions, how connections are getting opened and closed in some cases, etc. In other words, it is not limited to the socket interface between the userspace and the kernelspace.
In addition to that, the current MPTCP selftests run a lot of different sub-tests but the TAP13 protocol used in the selftests don't support sub-tests: one failure in sub-tests implies that the whole selftest is seen as failed at the end because sub-tests are not tracked. It is then important to skip sub-tests not supported by old kernels.
To minimise the modifications and reduce the complexity to support old versions, the idea is to look at external signs and skip the whole selftest or just some sub-tests before starting them. This cannot be applied in all cases.
Similar to the second part, this third one focuses on marking different sub-tests as skipped if some MPTCP features are not supported. This time, only in "mptcp_join.sh" selftest, the remaining one, is modified. Several techniques are used here to achieve this task:
- Before starting some tests:
- Check if a file (sysctl knob) is present: that's what patch 12/17 is doing for the userspace PM feature.
- Check if a required kernel symbol is present in /proc/kallsyms: patches 9, 10, 14 and 15/17 are using this technique.
- Check if it is possible to setup a particular network environment requiring Netfilter or TC: if the preparation step fail, the linked sub-test is marked as skipped. Patch 5/17 is doing that.
- Check if a MIB counter is available: patches 7 and 13/17 do that.
- Check if the kernel version is newer than a specific one: patch 1/17 adds some helpers in mptcp_lib.sh to ease its use. That's not ideal and it is only used as last resort but as mentioned above, it is important to skip tests if they are not supported not to have the whole selftest always being marked as failed on old kernels. Patches 11 and 17/17 are checking the kernel version. An alternative would be to ignore the results for some sub-tests but that's not ideal too. Note that SELFTESTS_MPTCP_LIB_NO_KVERSION_CHECK env var can be set to 1 not to skip these tests if the running kernel doesn't have a supported version.
- After having launched the tests:
- Adapt the expectations depending on the presence of a kernel symbol (patch 6/17) or a kernel version (patch 8/17).
- Check is a MIB counter is available and skip the verification if not. Patch 4/17 is using this technique.
Before skipping tests, SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var value is checked: if it is set to 1, the test is marked as "failed" instead of "skipped". MPTCP public CI expects to have all features supported and it sets this env var to 1 to catch regressions in these new checks.
Patch 2/17 uses 'iptables-legacy' if available because it might be needed when using an older kernel not supporting iptables-nft.
Patch 3/17 adds some helpers used in the other patches mentioned to easily mark sub-tests as skipped.
Patch 16/17 uniforms MPTCP Join "listener" tests: it was imported code from userspace_pm.sh but without using the "code style" and ways of using tools and printing messages from MPTCP Join selftest.
Link: https://lore.kernel.org/stable/CA+G9fYtDGpgT4dckXD-y-N92nqUxuvue_7AtDdBcHrbO... [1] Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Signed-off-by: Matthieu Baerts matthieu.baerts@tessares.net --- Note that it is supposed to be the last series on this subject for -net.
Also, this will conflict with commit 0639fa230a21 ("selftests: mptcp: add explicit check for new mibs") that is currently in net-next but not in -net. Here is the resolution. It is a bit long but you will see, it is simple: take the version from -net with get_counter() and for the last one, move the new call to chk_rm_tx_nr() inside the 'if' statement:
------------------- 8< ------------------- diff --cc tools/testing/selftests/net/mptcp/mptcp_join.sh index 0ae8cafde439,85474e029784..bd47cdc2bd15 --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@@ -1360,27 -1265,23 +1355,25 @@@ chk_fclose_nr( fi
printf "%-${nr_blank}s %s" " " "ctx" - count=$(ip netns exec $ns_tx nstat -as | grep MPTcpExtMPFastcloseTx | awk '{print $2}') - [ -z "$count" ] && count=0 - [ "$count" != "$fclose_tx" ] && extra_msg="$extra_msg,tx=$count" - if [ "$count" != "$fclose_tx" ]; then + count=$(get_counter ${ns_tx} "MPTcpExtMPFastcloseTx") + if [ -z "$count" ]; then + echo -n "[skip]" + elif [ "$count" != "$fclose_tx" ]; then + extra_msg="$extra_msg,tx=$count" echo "[fail] got $count MP_FASTCLOSE[s] TX expected $fclose_tx" fail_test - dump_stats=1 else echo -n "[ ok ]" fi
echo -n " - fclzrx" - count=$(ip netns exec $ns_rx nstat -as | grep MPTcpExtMPFastcloseRx | awk '{print $2}') - [ -z "$count" ] && count=0 - [ "$count" != "$fclose_rx" ] && extra_msg="$extra_msg,rx=$count" - if [ "$count" != "$fclose_rx" ]; then + count=$(get_counter ${ns_rx} "MPTcpExtMPFastcloseRx") + if [ -z "$count" ]; then + echo -n "[skip]" + elif [ "$count" != "$fclose_rx" ]; then + extra_msg="$extra_msg,rx=$count" echo "[fail] got $count MP_FASTCLOSE[s] RX expected $fclose_rx" fail_test - dump_stats=1 else echo -n "[ ok ]" fi @@@ -1408,25 -1306,21 +1398,23 @@@ chk_rst_nr( fi
printf "%-${nr_blank}s %s" " " "rtx" - count=$(ip netns exec $ns_tx nstat -as | grep MPTcpExtMPRstTx | awk '{print $2}') - [ -z "$count" ] && count=0 - if [ $count -lt $rst_tx ]; then + count=$(get_counter ${ns_tx} "MPTcpExtMPRstTx") + if [ -z "$count" ]; then + echo -n "[skip]" + elif [ $count -lt $rst_tx ]; then echo "[fail] got $count MP_RST[s] TX expected $rst_tx" fail_test - dump_stats=1 else echo -n "[ ok ]" fi
echo -n " - rstrx " - count=$(ip netns exec $ns_rx nstat -as | grep MPTcpExtMPRstRx | awk '{print $2}') - [ -z "$count" ] && count=0 - if [ "$count" -lt "$rst_rx" ]; then + count=$(get_counter ${ns_rx} "MPTcpExtMPRstRx") + if [ -z "$count" ]; then + echo -n "[skip]" + elif [ "$count" -lt "$rst_rx" ]; then echo "[fail] got $count MP_RST[s] RX expected $rst_rx" fail_test - dump_stats=1 else echo -n "[ ok ]" fi @@@ -1441,28 -1333,23 +1427,25 @@@ chk_infi_nr( local infi_tx=$1 local infi_rx=$2 local count - local dump_stats
printf "%-${nr_blank}s %s" " " "itx" - count=$(ip netns exec $ns2 nstat -as | grep InfiniteMapTx | awk '{print $2}') - [ -z "$count" ] && count=0 - if [ "$count" != "$infi_tx" ]; then + count=$(get_counter ${ns2} "MPTcpExtInfiniteMapTx") + if [ -z "$count" ]; then + echo -n "[skip]" + elif [ "$count" != "$infi_tx" ]; then echo "[fail] got $count infinite map[s] TX expected $infi_tx" fail_test - dump_stats=1 else echo -n "[ ok ]" fi
echo -n " - infirx" - count=$(ip netns exec $ns1 nstat -as | grep InfiniteMapRx | awk '{print $2}') - [ -z "$count" ] && count=0 - if [ "$count" != "$infi_rx" ]; then + count=$(get_counter ${ns1} "MPTcpExtInfiniteMapRx") + if [ -z "$count" ]; then + echo "[skip]" + elif [ "$count" != "$infi_rx" ]; then echo "[fail] got $count infinite map[s] RX expected $infi_rx" fail_test - dump_stats=1 else echo "[ ok ]" fi @@@ -1491,13 -1375,11 +1471,12 @@@ chk_join_nr( fi
printf "%03u %-36s %s" "${TEST_COUNT}" "${title}" "syn" - count=$(ip netns exec $ns1 nstat -as | grep MPTcpExtMPJoinSynRx | awk '{print $2}') - [ -z "$count" ] && count=0 - if [ "$count" != "$syn_nr" ]; then + count=$(get_counter ${ns1} "MPTcpExtMPJoinSynRx") + if [ -z "$count" ]; then + echo -n "[skip]" + elif [ "$count" != "$syn_nr" ]; then echo "[fail] got $count JOIN[s] syn expected $syn_nr" fail_test - dump_stats=1 else echo -n "[ ok ]" fi @@@ -1523,13 -1403,11 +1501,12 @@@ fi
echo -n " - ack" - count=$(ip netns exec $ns1 nstat -as | grep MPTcpExtMPJoinAckRx | awk '{print $2}') - [ -z "$count" ] && count=0 - if [ "$count" != "$ack_nr" ]; then + count=$(get_counter ${ns1} "MPTcpExtMPJoinAckRx") + if [ -z "$count" ]; then + echo "[skip]" + elif [ "$count" != "$ack_nr" ]; then echo "[fail] got $count JOIN[s] ack expected $ack_nr" fail_test - dump_stats=1 else echo "[ ok ]" fi @@@ -1599,40 -1475,35 +1574,37 @@@ chk_add_nr( timeout=$(ip netns exec $ns1 sysctl -n net.mptcp.add_addr_timeout)
printf "%-${nr_blank}s %s" " " "add" - count=$(ip netns exec $ns2 nstat -as MPTcpExtAddAddr | grep MPTcpExtAddAddr | awk '{print $2}') - [ -z "$count" ] && count=0 - + count=$(get_counter ${ns2} "MPTcpExtAddAddr") + if [ -z "$count" ]; then + echo -n "[skip]" # if the test configured a short timeout tolerate greater then expected # add addrs options, due to retransmissions - if [ "$count" != "$add_nr" ] && { [ "$timeout" -gt 1 ] || [ "$count" -lt "$add_nr" ]; }; then + elif [ "$count" != "$add_nr" ] && { [ "$timeout" -gt 1 ] || [ "$count" -lt "$add_nr" ]; }; then echo "[fail] got $count ADD_ADDR[s] expected $add_nr" fail_test - dump_stats=1 else echo -n "[ ok ]" fi
echo -n " - echo " - count=$(ip netns exec $ns1 nstat -as MPTcpExtEchoAdd | grep MPTcpExtEchoAdd | awk '{print $2}') - [ -z "$count" ] && count=0 - if [ "$count" != "$echo_nr" ]; then + count=$(get_counter ${ns1} "MPTcpExtEchoAdd") + if [ -z "$count" ]; then + echo -n "[skip]" + elif [ "$count" != "$echo_nr" ]; then echo "[fail] got $count ADD_ADDR echo[s] expected $echo_nr" fail_test - dump_stats=1 else echo -n "[ ok ]" fi
if [ $port_nr -gt 0 ]; then echo -n " - pt " - count=$(ip netns exec $ns2 nstat -as | grep MPTcpExtPortAdd | awk '{print $2}') - [ -z "$count" ] && count=0 - if [ "$count" != "$port_nr" ]; then + count=$(get_counter ${ns2} "MPTcpExtPortAdd") + if [ -z "$count" ]; then + echo "[skip]" + elif [ "$count" != "$port_nr" ]; then echo "[fail] got $count ADD_ADDR[s] with a port-number expected $port_nr" fail_test - dump_stats=1 else echo "[ ok ]" fi @@@ -1737,13 -1633,11 +1734,12 @@@ chk_rm_nr( fi
printf "%-${nr_blank}s %s" " " "rm " - count=$(ip netns exec $addr_ns nstat -as MPTcpExtRmAddr | grep MPTcpExtRmAddr | awk '{print $2}') - [ -z "$count" ] && count=0 - if [ "$count" != "$rm_addr_nr" ]; then + count=$(get_counter ${addr_ns} "MPTcpExtRmAddr") + if [ -z "$count" ]; then + echo -n "[skip]" + elif [ "$count" != "$rm_addr_nr" ]; then echo "[fail] got $count RM_ADDR[s] expected $rm_addr_nr" fail_test - dump_stats=1 else echo -n "[ ok ]" fi @@@ -1767,12 -1661,12 +1763,10 @@@ else echo "[fail] got $count RM_SUBFLOW[s] expected in range [$rm_subflow_nr:$((rm_subflow_nr*2))]" fail_test - dump_stats=1 fi - return - fi - if [ "$count" != "$rm_subflow_nr" ]; then + elif [ "$count" != "$rm_subflow_nr" ]; then echo "[fail] got $count RM_SUBFLOW[s] expected $rm_subflow_nr" fail_test - dump_stats=1 else echo -n "[ ok ]" fi @@@ -1787,28 -1696,23 +1796,25 @@@ chk_prio_nr( local mp_prio_nr_tx=$1 local mp_prio_nr_rx=$2 local count - local dump_stats
printf "%-${nr_blank}s %s" " " "ptx" - count=$(ip netns exec $ns1 nstat -as | grep MPTcpExtMPPrioTx | awk '{print $2}') - [ -z "$count" ] && count=0 - if [ "$count" != "$mp_prio_nr_tx" ]; then + count=$(get_counter ${ns1} "MPTcpExtMPPrioTx") + if [ -z "$count" ]; then + echo -n "[skip]" + elif [ "$count" != "$mp_prio_nr_tx" ]; then echo "[fail] got $count MP_PRIO[s] TX expected $mp_prio_nr_tx" fail_test - dump_stats=1 else echo -n "[ ok ]" fi
echo -n " - prx " - count=$(ip netns exec $ns1 nstat -as | grep MPTcpExtMPPrioRx | awk '{print $2}') - [ -z "$count" ] && count=0 - if [ "$count" != "$mp_prio_nr_rx" ]; then + count=$(get_counter ${ns1} "MPTcpExtMPPrioRx") + if [ -z "$count" ]; then + echo "[skip]" + elif [ "$count" != "$mp_prio_nr_rx" ]; then echo "[fail] got $count MP_PRIO[s] RX expected $mp_prio_nr_rx" fail_test - dump_stats=1 else echo "[ ok ]" fi @@@ -2394,12 -2290,8 +2399,13 @@@ remove_tests( pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow run_tests $ns1 $ns2 10.0.1.1 0 -8 -8 slow chk_join_nr 3 3 3 - chk_rm_tx_nr 0 - chk_rm_nr 0 3 simult + + if mptcp_lib_kversion_ge 5.18; then ++ chk_rm_tx_nr 0 + chk_rm_nr 0 3 simult + else + chk_rm_nr 3 3 + fi fi
# addresses flush ------------------- 8< -------------------
The resolved conflicts are also visible there:
https://github.com/multipath-tcp/mptcp_net-next/blob/t/DO-NOT-MERGE-git-mark...
--- Matthieu Baerts (17): selftests: mptcp: lib: skip if not below kernel version selftests: mptcp: join: use 'iptables-legacy' if available selftests: mptcp: join: helpers to skip tests selftests: mptcp: join: skip check if MIB counter not supported selftests: mptcp: join: skip test if iptables/tc cmds fail selftests: mptcp: join: support local endpoint being tracked or not selftests: mptcp: join: skip Fastclose tests if not supported selftests: mptcp: join: support RM_ADDR for used endpoints or not selftests: mptcp: join: skip implicit tests if not supported selftests: mptcp: join: skip backup if set flag on ID not supported selftests: mptcp: join: skip fullmesh flag tests if not supported selftests: mptcp: join: skip userspace PM tests if not supported selftests: mptcp: join: skip fail tests if not supported selftests: mptcp: join: skip MPC backups tests if not supported selftests: mptcp: join: skip PM listener tests if not supported selftests: mptcp: join: uniform listener tests selftests: mptcp: join: skip mixed tests if not supported
tools/testing/selftests/net/mptcp/mptcp_join.sh | 513 +++++++++++++++--------- tools/testing/selftests/net/mptcp/mptcp_lib.sh | 26 ++ 2 files changed, 354 insertions(+), 185 deletions(-) --- base-commit: 1b8975f30abffc4f74f1ba049f9042e7d8f646cc change-id: 20230609-upstream-net-20230610-mptcp-selftests-support-old-kernels-part-3-37aa5185e955
Best regards,
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features.
A new function is now available to easily detect if a feature is missing by looking at the kernel version. That's clearly not ideal and this kind of check should be avoided as soon as possible. But sometimes, there are no external sign that a "feature" is available or not: internal behaviours can change without modifying the uAPI and these selftests are verifying the internal behaviours. Sometimes, the only (easy) way to verify if the feature is present is to run the test but then the validation cannot determine if there is a failure with the feature or if the feature is missing. Then it looks better to check the kernel version instead of having tests that can never fail. In any case, we need a solution not to have a whole selftest being marked as failed just because one sub-test has failed.
Note that this env var car be set to 1 not to do such check and run the linked sub-test: SELFTESTS_MPTCP_LIB_NO_KVERSION_CHECK.
This new helper is going to be used in the following commits. In order to ease the backport of such future patches, it would be good if this patch is backported up to the introduction of MPTCP selftests, hence the Fixes tag below: this type of check was supposed to be done from the beginning.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 048d19d444be ("mptcp: add basic kselftest for mptcp") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts matthieu.baerts@tessares.net --- tools/testing/selftests/net/mptcp/mptcp_lib.sh | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+)
diff --git a/tools/testing/selftests/net/mptcp/mptcp_lib.sh b/tools/testing/selftests/net/mptcp/mptcp_lib.sh index 29b65f4b73b2..f32045b23b89 100644 --- a/tools/testing/selftests/net/mptcp/mptcp_lib.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_lib.sh @@ -76,3 +76,29 @@ mptcp_lib_kallsyms_doesnt_have() {
mptcp_lib_fail_if_expected_feature "${sym} symbol has been found" } + +# !!!AVOID USING THIS!!! +# Features might not land in the expected version and features can be backported +# +# $1: kernel version, e.g. 6.3 +mptcp_lib_kversion_ge() { + local exp_maj="${1%.*}" + local exp_min="${1#*.}" + local v maj min + + # If the kernel has backported features, set this env var to 1: + if [ "${SELFTESTS_MPTCP_LIB_NO_KVERSION_CHECK:-}" = "1" ]; then + return 0 + fi + + v=$(uname -r | cut -d'.' -f1,2) + maj=${v%.*} + min=${v#*.} + + if [ "${maj}" -gt "${exp_maj}" ] || + { [ "${maj}" -eq "${exp_maj}" ] && [ "${min}" -ge "${exp_min}" ]; }; then + return 0 + fi + + mptcp_lib_fail_if_expected_feature "kernel version ${1} lower than ${v}" +}
Hello:
This series was applied to netdev/net.git (main) by Jakub Kicinski kuba@kernel.org:
On Sat, 10 Jun 2023 18:11:36 +0200 you wrote:
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features.
A new function is now available to easily detect if a feature is missing by looking at the kernel version. That's clearly not ideal and this kind of check should be avoided as soon as possible. But sometimes, there are no external sign that a "feature" is available or not: internal behaviours can change without modifying the uAPI and these selftests are verifying the internal behaviours. Sometimes, the only (easy) way to verify if the feature is present is to run the test but then the validation cannot determine if there is a failure with the feature or if the feature is missing. Then it looks better to check the kernel version instead of having tests that can never fail. In any case, we need a solution not to have a whole selftest being marked as failed just because one sub-test has failed.
[...]
Here is the summary with links: - [net,01/17] selftests: mptcp: lib: skip if not below kernel version https://git.kernel.org/netdev/net/c/b1a6a38ab8a6 - [net,02/17] selftests: mptcp: join: use 'iptables-legacy' if available https://git.kernel.org/netdev/net/c/0c4cd3f86a40 - [net,03/17] selftests: mptcp: join: helpers to skip tests https://git.kernel.org/netdev/net/c/cdb50525345c - [net,04/17] selftests: mptcp: join: skip check if MIB counter not supported (no matching commit) - [net,05/17] selftests: mptcp: join: skip test if iptables/tc cmds fail https://git.kernel.org/netdev/net/c/4a0b866a3f7d - [net,06/17] selftests: mptcp: join: support local endpoint being tracked or not https://git.kernel.org/netdev/net/c/d4c81bbb8600 - [net,07/17] selftests: mptcp: join: skip Fastclose tests if not supported https://git.kernel.org/netdev/net/c/ae947bb2c253 - [net,08/17] selftests: mptcp: join: support RM_ADDR for used endpoints or not https://git.kernel.org/netdev/net/c/425ba803124b - [net,09/17] selftests: mptcp: join: skip implicit tests if not supported https://git.kernel.org/netdev/net/c/36c4127ae8dd - [net,10/17] selftests: mptcp: join: skip backup if set flag on ID not supported https://git.kernel.org/netdev/net/c/07216a3c5d92 - [net,11/17] selftests: mptcp: join: skip fullmesh flag tests if not supported https://git.kernel.org/netdev/net/c/9db34c4294af - [net,12/17] selftests: mptcp: join: skip userspace PM tests if not supported https://git.kernel.org/netdev/net/c/f2b492b04a16 - [net,13/17] selftests: mptcp: join: skip fail tests if not supported https://git.kernel.org/netdev/net/c/ff8897b51894 - [net,14/17] selftests: mptcp: join: skip MPC backups tests if not supported https://git.kernel.org/netdev/net/c/632978f0a961 - [net,15/17] selftests: mptcp: join: skip PM listener tests if not supported https://git.kernel.org/netdev/net/c/0471bb479af0 - [net,16/17] selftests: mptcp: join: uniform listener tests https://git.kernel.org/netdev/net/c/96b84195df61 - [net,17/17] selftests: mptcp: join: skip mixed tests if not supported https://git.kernel.org/netdev/net/c/6673851be0fc
You are awesome, thank you!
IPTables commands using 'iptables-nft' fail on old kernels, at least 5.15 because it doesn't see the default IPTables chains:
$ iptables -L iptables/1.8.2 Failed to initialize nft: Protocol not supported
As a first step before switching to NFTables, we can use iptables-legacy if available.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 8d014eaa9254 ("selftests: mptcp: add ADD_ADDR timeout test case") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts matthieu.baerts@tessares.net --- tools/testing/selftests/net/mptcp/mptcp_join.sh | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-)
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh index 29f0c99d9a46..74cc8a74a9d6 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@ -25,6 +25,8 @@ capout="" ns1="" ns2="" ksft_skip=4 +iptables="iptables" +ip6tables="ip6tables" timeout_poll=30 timeout_test=$((timeout_poll * 2 + 1)) capture=0 @@ -146,7 +148,11 @@ check_tools() exit $ksft_skip fi
- if ! iptables -V &> /dev/null; then + # Use the legacy version if available to support old kernel versions + if iptables-legacy -V &> /dev/null; then + iptables="iptables-legacy" + ip6tables="ip6tables-legacy" + elif ! iptables -V &> /dev/null; then echo "SKIP: Could not run all tests without iptables tool" exit $ksft_skip fi @@ -247,9 +253,9 @@ reset_with_add_addr_timeout()
reset "${1}" || return 1
- tables="iptables" + tables="${iptables}" if [ $ip -eq 6 ]; then - tables="ip6tables" + tables="${ip6tables}" fi
ip netns exec $ns1 sysctl -q net.mptcp.add_addr_timeout=1 @@ -314,9 +320,9 @@ reset_with_fail() local ip="${3:-4}" local tables
- tables="iptables" + tables="${iptables}" if [ $ip -eq 6 ]; then - tables="ip6tables" + tables="${ip6tables}" fi
ip netns exec $ns2 $tables \ @@ -704,7 +710,7 @@ filter_tcp_from() local src="${2}" local target="${3}"
- ip netns exec "${ns}" iptables -A INPUT -s "${src}" -p tcp -j "${target}" + ip netns exec "${ns}" ${iptables} -A INPUT -s "${src}" -p tcp -j "${target}" }
do_transfer()
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features.
Here are some helpers that will be used to mark subtests as skipped if a feature is not supported. Marking as a fix for the commit introducing this selftest to help with the backports.
While at it, also check if kallsyms feature is available as it will also be used in the following commits to check if MPTCP features are available before starting a test.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: b08fbf241064 ("selftests: add test-cases for MPTCP MP_JOIN") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts matthieu.baerts@tessares.net --- tools/testing/selftests/net/mptcp/mptcp_join.sh | 27 +++++++++++++++++++++++++ 1 file changed, 27 insertions(+)
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh index 74cc8a74a9d6..a63aed145393 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@ -142,6 +142,7 @@ cleanup_partial() check_tools() { mptcp_lib_check_mptcp + mptcp_lib_check_kallsyms
if ! ip -Version &> /dev/null; then echo "SKIP: Could not run test without ip tool" @@ -191,6 +192,32 @@ cleanup() cleanup_partial }
+# $1: msg +print_title() +{ + printf "%03u %-36s %s" "${TEST_COUNT}" "${TEST_NAME}" "${1}" +} + +# [ $1: fail msg ] +mark_as_skipped() +{ + local msg="${1:-"Feature not supported"}" + + mptcp_lib_fail_if_expected_feature "${msg}" + + print_title "[ skip ] ${msg}" + printf "\n" +} + +# $@: condition +continue_if() +{ + if ! "${@}"; then + mark_as_skipped + return 1 + fi +} + skip_test() { if [ "${#only_tests_ids[@]}" -eq 0 ] && [ "${#only_tests_names[@]}" -eq 0 ]; then
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features.
One of them is the MPTCP MIB counters introduced in commit fc518953bc9c ("mptcp: add and use MIB counter infrastructure") and more later. The MPTCP Join selftest heavily relies on these counters.
If a counter is not supported by the kernel, it is not displayed when using 'nstat -z'. We can then detect that and skip the verification. A new helper (get_counter()) has been added to do the required checks and return an error if the counter is not available.
Note that if we expect to have these features available and if SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var is set to 1, the tests will be marked as failed instead of skipped.
This new helper also makes sure we get the exact counter we want to avoid issues we had in the past, e.g. with MPTcpExtRmAddr and MPTcpExtRmAddrDrop sharing the same prefix. While at it, we uniform the way we fetch a MIB counter.
Note for the backports: we rarely change these modified blocks so if there is are conflicts, it is very likely because a counter is not used in the older kernels and we don't need that chunk.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: b08fbf241064 ("selftests: add test-cases for MPTCP MP_JOIN") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts matthieu.baerts@tessares.net --- tools/testing/selftests/net/mptcp/mptcp_join.sh | 230 +++++++++++++----------- 1 file changed, 130 insertions(+), 100 deletions(-)
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh index a63aed145393..276396cbe60c 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@ -500,11 +500,25 @@ wait_local_port_listen() done }
+# $1: ns ; $2: counter +get_counter() +{ + local ns="${1}" + local counter="${2}" + local count + + count=$(ip netns exec ${ns} nstat -asz "${counter}" | awk 'NR==1 {next} {print $2}') + if [ -z "${count}" ]; then + mptcp_lib_fail_if_expected_feature "${counter} counter" + return 1 + fi + + echo "${count}" +} + rm_addr_count() { - local ns=${1} - - ip netns exec ${ns} nstat -as | grep MPTcpExtRmAddr | awk '{print $2}' + get_counter "${1}" "MPTcpExtRmAddr" }
# $1: ns, $2: old rm_addr counter in $ns @@ -527,11 +541,11 @@ wait_mpj() local ns="${1}" local cnt old_cnt
- old_cnt=$(ip netns exec ${ns} nstat -as | grep MPJoinAckRx | awk '{print $2}') + old_cnt=$(get_counter ${ns} "MPTcpExtMPJoinAckRx")
local i for i in $(seq 10); do - cnt=$(ip netns exec ${ns} nstat -as | grep MPJoinAckRx | awk '{print $2}') + cnt=$(get_counter ${ns} "MPTcpExtMPJoinAckRx") [ "$cnt" = "${old_cnt}" ] || break sleep 0.1 done @@ -1190,12 +1204,13 @@ chk_csum_nr() fi
printf "%-${nr_blank}s %s" " " "sum" - count=$(ip netns exec $ns1 nstat -as | grep MPTcpExtDataCsumErr | awk '{print $2}') - [ -z "$count" ] && count=0 + count=$(get_counter ${ns1} "MPTcpExtDataCsumErr") if [ "$count" != "$csum_ns1" ]; then extra_msg="$extra_msg ns1=$count" fi - if { [ "$count" != $csum_ns1 ] && [ $allow_multi_errors_ns1 -eq 0 ]; } || + if [ -z "$count" ]; then + echo -n "[skip]" + elif { [ "$count" != $csum_ns1 ] && [ $allow_multi_errors_ns1 -eq 0 ]; } || { [ "$count" -lt $csum_ns1 ] && [ $allow_multi_errors_ns1 -eq 1 ]; }; then echo "[fail] got $count data checksum error[s] expected $csum_ns1" fail_test @@ -1204,12 +1219,13 @@ chk_csum_nr() echo -n "[ ok ]" fi echo -n " - csum " - count=$(ip netns exec $ns2 nstat -as | grep MPTcpExtDataCsumErr | awk '{print $2}') - [ -z "$count" ] && count=0 + count=$(get_counter ${ns2} "MPTcpExtDataCsumErr") if [ "$count" != "$csum_ns2" ]; then extra_msg="$extra_msg ns2=$count" fi - if { [ "$count" != $csum_ns2 ] && [ $allow_multi_errors_ns2 -eq 0 ]; } || + if [ -z "$count" ]; then + echo -n "[skip]" + elif { [ "$count" != $csum_ns2 ] && [ $allow_multi_errors_ns2 -eq 0 ]; } || { [ "$count" -lt $csum_ns2 ] && [ $allow_multi_errors_ns2 -eq 1 ]; }; then echo "[fail] got $count data checksum error[s] expected $csum_ns2" fail_test @@ -1251,12 +1267,13 @@ chk_fail_nr() fi
printf "%-${nr_blank}s %s" " " "ftx" - count=$(ip netns exec $ns_tx nstat -as | grep MPTcpExtMPFailTx | awk '{print $2}') - [ -z "$count" ] && count=0 + count=$(get_counter ${ns_tx} "MPTcpExtMPFailTx") if [ "$count" != "$fail_tx" ]; then extra_msg="$extra_msg,tx=$count" fi - if { [ "$count" != "$fail_tx" ] && [ $allow_tx_lost -eq 0 ]; } || + if [ -z "$count" ]; then + echo -n "[skip]" + elif { [ "$count" != "$fail_tx" ] && [ $allow_tx_lost -eq 0 ]; } || { [ "$count" -gt "$fail_tx" ] && [ $allow_tx_lost -eq 1 ]; }; then echo "[fail] got $count MP_FAIL[s] TX expected $fail_tx" fail_test @@ -1266,12 +1283,13 @@ chk_fail_nr() fi
echo -n " - failrx" - count=$(ip netns exec $ns_rx nstat -as | grep MPTcpExtMPFailRx | awk '{print $2}') - [ -z "$count" ] && count=0 + count=$(get_counter ${ns_rx} "MPTcpExtMPFailRx") if [ "$count" != "$fail_rx" ]; then extra_msg="$extra_msg,rx=$count" fi - if { [ "$count" != "$fail_rx" ] && [ $allow_rx_lost -eq 0 ]; } || + if [ -z "$count" ]; then + echo -n "[skip]" + elif { [ "$count" != "$fail_rx" ] && [ $allow_rx_lost -eq 0 ]; } || { [ "$count" -gt "$fail_rx" ] && [ $allow_rx_lost -eq 1 ]; }; then echo "[fail] got $count MP_FAIL[s] RX expected $fail_rx" fail_test @@ -1303,10 +1321,11 @@ chk_fclose_nr() fi
printf "%-${nr_blank}s %s" " " "ctx" - count=$(ip netns exec $ns_tx nstat -as | grep MPTcpExtMPFastcloseTx | awk '{print $2}') - [ -z "$count" ] && count=0 - [ "$count" != "$fclose_tx" ] && extra_msg="$extra_msg,tx=$count" - if [ "$count" != "$fclose_tx" ]; then + count=$(get_counter ${ns_tx} "MPTcpExtMPFastcloseTx") + if [ -z "$count" ]; then + echo -n "[skip]" + elif [ "$count" != "$fclose_tx" ]; then + extra_msg="$extra_msg,tx=$count" echo "[fail] got $count MP_FASTCLOSE[s] TX expected $fclose_tx" fail_test dump_stats=1 @@ -1315,10 +1334,11 @@ chk_fclose_nr() fi
echo -n " - fclzrx" - count=$(ip netns exec $ns_rx nstat -as | grep MPTcpExtMPFastcloseRx | awk '{print $2}') - [ -z "$count" ] && count=0 - [ "$count" != "$fclose_rx" ] && extra_msg="$extra_msg,rx=$count" - if [ "$count" != "$fclose_rx" ]; then + count=$(get_counter ${ns_rx} "MPTcpExtMPFastcloseRx") + if [ -z "$count" ]; then + echo -n "[skip]" + elif [ "$count" != "$fclose_rx" ]; then + extra_msg="$extra_msg,rx=$count" echo "[fail] got $count MP_FASTCLOSE[s] RX expected $fclose_rx" fail_test dump_stats=1 @@ -1349,9 +1369,10 @@ chk_rst_nr() fi
printf "%-${nr_blank}s %s" " " "rtx" - count=$(ip netns exec $ns_tx nstat -as | grep MPTcpExtMPRstTx | awk '{print $2}') - [ -z "$count" ] && count=0 - if [ $count -lt $rst_tx ]; then + count=$(get_counter ${ns_tx} "MPTcpExtMPRstTx") + if [ -z "$count" ]; then + echo -n "[skip]" + elif [ $count -lt $rst_tx ]; then echo "[fail] got $count MP_RST[s] TX expected $rst_tx" fail_test dump_stats=1 @@ -1360,9 +1381,10 @@ chk_rst_nr() fi
echo -n " - rstrx " - count=$(ip netns exec $ns_rx nstat -as | grep MPTcpExtMPRstRx | awk '{print $2}') - [ -z "$count" ] && count=0 - if [ "$count" -lt "$rst_rx" ]; then + count=$(get_counter ${ns_rx} "MPTcpExtMPRstRx") + if [ -z "$count" ]; then + echo -n "[skip]" + elif [ "$count" -lt "$rst_rx" ]; then echo "[fail] got $count MP_RST[s] RX expected $rst_rx" fail_test dump_stats=1 @@ -1383,9 +1405,10 @@ chk_infi_nr() local dump_stats
printf "%-${nr_blank}s %s" " " "itx" - count=$(ip netns exec $ns2 nstat -as | grep InfiniteMapTx | awk '{print $2}') - [ -z "$count" ] && count=0 - if [ "$count" != "$infi_tx" ]; then + count=$(get_counter ${ns2} "MPTcpExtInfiniteMapTx") + if [ -z "$count" ]; then + echo -n "[skip]" + elif [ "$count" != "$infi_tx" ]; then echo "[fail] got $count infinite map[s] TX expected $infi_tx" fail_test dump_stats=1 @@ -1394,9 +1417,10 @@ chk_infi_nr() fi
echo -n " - infirx" - count=$(ip netns exec $ns1 nstat -as | grep InfiniteMapRx | awk '{print $2}') - [ -z "$count" ] && count=0 - if [ "$count" != "$infi_rx" ]; then + count=$(get_counter ${ns1} "MPTcpExtInfiniteMapRx") + if [ -z "$count" ]; then + echo "[skip]" + elif [ "$count" != "$infi_rx" ]; then echo "[fail] got $count infinite map[s] RX expected $infi_rx" fail_test dump_stats=1 @@ -1428,9 +1452,10 @@ chk_join_nr() fi
printf "%03u %-36s %s" "${TEST_COUNT}" "${title}" "syn" - count=$(ip netns exec $ns1 nstat -as | grep MPTcpExtMPJoinSynRx | awk '{print $2}') - [ -z "$count" ] && count=0 - if [ "$count" != "$syn_nr" ]; then + count=$(get_counter ${ns1} "MPTcpExtMPJoinSynRx") + if [ -z "$count" ]; then + echo -n "[skip]" + elif [ "$count" != "$syn_nr" ]; then echo "[fail] got $count JOIN[s] syn expected $syn_nr" fail_test dump_stats=1 @@ -1440,9 +1465,10 @@ chk_join_nr()
echo -n " - synack" with_cookie=$(ip netns exec $ns2 sysctl -n net.ipv4.tcp_syncookies) - count=$(ip netns exec $ns2 nstat -as | grep MPTcpExtMPJoinSynAckRx | awk '{print $2}') - [ -z "$count" ] && count=0 - if [ "$count" != "$syn_ack_nr" ]; then + count=$(get_counter ${ns2} "MPTcpExtMPJoinSynAckRx") + if [ -z "$count" ]; then + echo -n "[skip]" + elif [ "$count" != "$syn_ack_nr" ]; then # simult connections exceeding the limit with cookie enabled could go up to # synack validation as the conn limit can be enforced reliably only after # the subflow creation @@ -1458,9 +1484,10 @@ chk_join_nr() fi
echo -n " - ack" - count=$(ip netns exec $ns1 nstat -as | grep MPTcpExtMPJoinAckRx | awk '{print $2}') - [ -z "$count" ] && count=0 - if [ "$count" != "$ack_nr" ]; then + count=$(get_counter ${ns1} "MPTcpExtMPJoinAckRx") + if [ -z "$count" ]; then + echo "[skip]" + elif [ "$count" != "$ack_nr" ]; then echo "[fail] got $count JOIN[s] ack expected $ack_nr" fail_test dump_stats=1 @@ -1492,12 +1519,12 @@ chk_stale_nr() local recover_nr
printf "%-${nr_blank}s %-18s" " " "stale" - stale_nr=$(ip netns exec $ns nstat -as | grep MPTcpExtSubflowStale | awk '{print $2}') - [ -z "$stale_nr" ] && stale_nr=0 - recover_nr=$(ip netns exec $ns nstat -as | grep MPTcpExtSubflowRecover | awk '{print $2}') - [ -z "$recover_nr" ] && recover_nr=0
- if [ $stale_nr -lt $stale_min ] || + stale_nr=$(get_counter ${ns} "MPTcpExtSubflowStale") + recover_nr=$(get_counter ${ns} "MPTcpExtSubflowRecover") + if [ -z "$stale_nr" ] || [ -z "$recover_nr" ]; then + echo "[skip]" + elif [ $stale_nr -lt $stale_min ] || { [ $stale_max -gt 0 ] && [ $stale_nr -gt $stale_max ]; } || [ $((stale_nr - recover_nr)) -ne $stale_delta ]; then echo "[fail] got $stale_nr stale[s] $recover_nr recover[s], " \ @@ -1533,12 +1560,12 @@ chk_add_nr() timeout=$(ip netns exec $ns1 sysctl -n net.mptcp.add_addr_timeout)
printf "%-${nr_blank}s %s" " " "add" - count=$(ip netns exec $ns2 nstat -as MPTcpExtAddAddr | grep MPTcpExtAddAddr | awk '{print $2}') - [ -z "$count" ] && count=0 - + count=$(get_counter ${ns2} "MPTcpExtAddAddr") + if [ -z "$count" ]; then + echo -n "[skip]" # if the test configured a short timeout tolerate greater then expected # add addrs options, due to retransmissions - if [ "$count" != "$add_nr" ] && { [ "$timeout" -gt 1 ] || [ "$count" -lt "$add_nr" ]; }; then + elif [ "$count" != "$add_nr" ] && { [ "$timeout" -gt 1 ] || [ "$count" -lt "$add_nr" ]; }; then echo "[fail] got $count ADD_ADDR[s] expected $add_nr" fail_test dump_stats=1 @@ -1547,9 +1574,10 @@ chk_add_nr() fi
echo -n " - echo " - count=$(ip netns exec $ns1 nstat -as | grep MPTcpExtEchoAdd | awk '{print $2}') - [ -z "$count" ] && count=0 - if [ "$count" != "$echo_nr" ]; then + count=$(get_counter ${ns1} "MPTcpExtEchoAdd") + if [ -z "$count" ]; then + echo -n "[skip]" + elif [ "$count" != "$echo_nr" ]; then echo "[fail] got $count ADD_ADDR echo[s] expected $echo_nr" fail_test dump_stats=1 @@ -1559,9 +1587,10 @@ chk_add_nr()
if [ $port_nr -gt 0 ]; then echo -n " - pt " - count=$(ip netns exec $ns2 nstat -as | grep MPTcpExtPortAdd | awk '{print $2}') - [ -z "$count" ] && count=0 - if [ "$count" != "$port_nr" ]; then + count=$(get_counter ${ns2} "MPTcpExtPortAdd") + if [ -z "$count" ]; then + echo "[skip]" + elif [ "$count" != "$port_nr" ]; then echo "[fail] got $count ADD_ADDR[s] with a port-number expected $port_nr" fail_test dump_stats=1 @@ -1570,10 +1599,10 @@ chk_add_nr() fi
printf "%-${nr_blank}s %s" " " "syn" - count=$(ip netns exec $ns1 nstat -as | grep MPTcpExtMPJoinPortSynRx | - awk '{print $2}') - [ -z "$count" ] && count=0 - if [ "$count" != "$syn_nr" ]; then + count=$(get_counter ${ns1} "MPTcpExtMPJoinPortSynRx") + if [ -z "$count" ]; then + echo -n "[skip]" + elif [ "$count" != "$syn_nr" ]; then echo "[fail] got $count JOIN[s] syn with a different \ port-number expected $syn_nr" fail_test @@ -1583,10 +1612,10 @@ chk_add_nr() fi
echo -n " - synack" - count=$(ip netns exec $ns2 nstat -as | grep MPTcpExtMPJoinPortSynAckRx | - awk '{print $2}') - [ -z "$count" ] && count=0 - if [ "$count" != "$syn_ack_nr" ]; then + count=$(get_counter ${ns2} "MPTcpExtMPJoinPortSynAckRx") + if [ -z "$count" ]; then + echo -n "[skip]" + elif [ "$count" != "$syn_ack_nr" ]; then echo "[fail] got $count JOIN[s] synack with a different \ port-number expected $syn_ack_nr" fail_test @@ -1596,10 +1625,10 @@ chk_add_nr() fi
echo -n " - ack" - count=$(ip netns exec $ns1 nstat -as | grep MPTcpExtMPJoinPortAckRx | - awk '{print $2}') - [ -z "$count" ] && count=0 - if [ "$count" != "$ack_nr" ]; then + count=$(get_counter ${ns1} "MPTcpExtMPJoinPortAckRx") + if [ -z "$count" ]; then + echo "[skip]" + elif [ "$count" != "$ack_nr" ]; then echo "[fail] got $count JOIN[s] ack with a different \ port-number expected $ack_nr" fail_test @@ -1609,10 +1638,10 @@ chk_add_nr() fi
printf "%-${nr_blank}s %s" " " "syn" - count=$(ip netns exec $ns1 nstat -as | grep MPTcpExtMismatchPortSynRx | - awk '{print $2}') - [ -z "$count" ] && count=0 - if [ "$count" != "$mis_syn_nr" ]; then + count=$(get_counter ${ns1} "MPTcpExtMismatchPortSynRx") + if [ -z "$count" ]; then + echo -n "[skip]" + elif [ "$count" != "$mis_syn_nr" ]; then echo "[fail] got $count JOIN[s] syn with a mismatched \ port-number expected $mis_syn_nr" fail_test @@ -1622,10 +1651,10 @@ chk_add_nr() fi
echo -n " - ack " - count=$(ip netns exec $ns1 nstat -as | grep MPTcpExtMismatchPortAckRx | - awk '{print $2}') - [ -z "$count" ] && count=0 - if [ "$count" != "$mis_ack_nr" ]; then + count=$(get_counter ${ns1} "MPTcpExtMismatchPortAckRx") + if [ -z "$count" ]; then + echo "[skip]" + elif [ "$count" != "$mis_ack_nr" ]; then echo "[fail] got $count JOIN[s] ack with a mismatched \ port-number expected $mis_ack_nr" fail_test @@ -1669,9 +1698,10 @@ chk_rm_nr() fi
printf "%-${nr_blank}s %s" " " "rm " - count=$(ip netns exec $addr_ns nstat -as | grep MPTcpExtRmAddr | awk '{print $2}') - [ -z "$count" ] && count=0 - if [ "$count" != "$rm_addr_nr" ]; then + count=$(get_counter ${addr_ns} "MPTcpExtRmAddr") + if [ -z "$count" ]; then + echo -n "[skip]" + elif [ "$count" != "$rm_addr_nr" ]; then echo "[fail] got $count RM_ADDR[s] expected $rm_addr_nr" fail_test dump_stats=1 @@ -1680,29 +1710,27 @@ chk_rm_nr() fi
echo -n " - rmsf " - count=$(ip netns exec $subflow_ns nstat -as | grep MPTcpExtRmSubflow | awk '{print $2}') - [ -z "$count" ] && count=0 - if [ -n "$simult" ]; then + count=$(get_counter ${subflow_ns} "MPTcpExtRmSubflow") + if [ -z "$count" ]; then + echo -n "[skip]" + elif [ -n "$simult" ]; then local cnt suffix
- cnt=$(ip netns exec $addr_ns nstat -as | grep MPTcpExtRmSubflow | awk '{print $2}') + cnt=$(get_counter ${addr_ns} "MPTcpExtRmSubflow")
# in case of simult flush, the subflow removal count on each side is # unreliable - [ -z "$cnt" ] && cnt=0 count=$((count + cnt)) [ "$count" != "$rm_subflow_nr" ] && suffix="$count in [$rm_subflow_nr:$((rm_subflow_nr*2))]" if [ $count -ge "$rm_subflow_nr" ] && \ [ "$count" -le "$((rm_subflow_nr *2 ))" ]; then - echo "[ ok ] $suffix" + echo -n "[ ok ] $suffix" else echo "[fail] got $count RM_SUBFLOW[s] expected in range [$rm_subflow_nr:$((rm_subflow_nr*2))]" fail_test dump_stats=1 fi - return - fi - if [ "$count" != "$rm_subflow_nr" ]; then + elif [ "$count" != "$rm_subflow_nr" ]; then echo "[fail] got $count RM_SUBFLOW[s] expected $rm_subflow_nr" fail_test dump_stats=1 @@ -1723,9 +1751,10 @@ chk_prio_nr() local dump_stats
printf "%-${nr_blank}s %s" " " "ptx" - count=$(ip netns exec $ns1 nstat -as | grep MPTcpExtMPPrioTx | awk '{print $2}') - [ -z "$count" ] && count=0 - if [ "$count" != "$mp_prio_nr_tx" ]; then + count=$(get_counter ${ns1} "MPTcpExtMPPrioTx") + if [ -z "$count" ]; then + echo -n "[skip]" + elif [ "$count" != "$mp_prio_nr_tx" ]; then echo "[fail] got $count MP_PRIO[s] TX expected $mp_prio_nr_tx" fail_test dump_stats=1 @@ -1734,9 +1763,10 @@ chk_prio_nr() fi
echo -n " - prx " - count=$(ip netns exec $ns1 nstat -as | grep MPTcpExtMPPrioRx | awk '{print $2}') - [ -z "$count" ] && count=0 - if [ "$count" != "$mp_prio_nr_rx" ]; then + count=$(get_counter ${ns1} "MPTcpExtMPPrioRx") + if [ -z "$count" ]; then + echo "[skip]" + elif [ "$count" != "$mp_prio_nr_rx" ]; then echo "[fail] got $count MP_PRIO[s] RX expected $mp_prio_nr_rx" fail_test dump_stats=1 @@ -1852,7 +1882,7 @@ wait_attempt_fail() while [ $time -lt $timeout_ms ]; do local cnt
- cnt=$(ip netns exec $ns nstat -as TcpAttemptFails | grep TcpAttemptFails | awk '{print $2}') + cnt=$(get_counter ${ns} "TcpAttemptFails")
[ "$cnt" = 1 ] && return 1 time=$((time + 100))
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features.
Some tests are using IPTables and/or TC commands to force some behaviours. If one of these commands fails -- likely because some features are not available due to missing kernel config -- we should intercept the error and skip the tests requiring these features.
Note that if we expect to have these features available and if SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var is set to 1, the tests will be marked as failed instead of skipped.
This patch also replaces the 'exit 1' by 'return 1' not to stop the selftest in the middle without the conclusion if there is an issue with NF or TC.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 8d014eaa9254 ("selftests: mptcp: add ADD_ADDR timeout test case") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts matthieu.baerts@tessares.net --- tools/testing/selftests/net/mptcp/mptcp_join.sh | 88 ++++++++++++++++--------- 1 file changed, 57 insertions(+), 31 deletions(-)
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh index 276396cbe60c..c471934ad5e0 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@ -286,11 +286,15 @@ reset_with_add_addr_timeout() fi
ip netns exec $ns1 sysctl -q net.mptcp.add_addr_timeout=1 - ip netns exec $ns2 $tables -A OUTPUT -p tcp \ - -m tcp --tcp-option 30 \ - -m bpf --bytecode \ - "$CBPF_MPTCP_SUBOPTION_ADD_ADDR" \ - -j DROP + + if ! ip netns exec $ns2 $tables -A OUTPUT -p tcp \ + -m tcp --tcp-option 30 \ + -m bpf --bytecode \ + "$CBPF_MPTCP_SUBOPTION_ADD_ADDR" \ + -j DROP; then + mark_as_skipped "unable to set the 'add addr' rule" + return 1 + fi }
# $1: test name @@ -334,17 +338,12 @@ reset_with_allow_join_id0() # tc action pedit offset 162 out of bounds # # Netfilter is used to mark packets with enough data. -reset_with_fail() +setup_fail_rules() { - reset "${1}" || return 1 - - ip netns exec $ns1 sysctl -q net.mptcp.checksum_enabled=1 - ip netns exec $ns2 sysctl -q net.mptcp.checksum_enabled=1 - check_invert=1 validate_checksum=1 - local i="$2" - local ip="${3:-4}" + local i="$1" + local ip="${2:-4}" local tables
tables="${iptables}" @@ -359,15 +358,32 @@ reset_with_fail() -p tcp \ -m length --length 150:9999 \ -m statistic --mode nth --packet 1 --every 99999 \ - -j MARK --set-mark 42 || exit 1 + -j MARK --set-mark 42 || return ${ksft_skip}
- tc -n $ns2 qdisc add dev ns2eth$i clsact || exit 1 + tc -n $ns2 qdisc add dev ns2eth$i clsact || return ${ksft_skip} tc -n $ns2 filter add dev ns2eth$i egress \ protocol ip prio 1000 \ handle 42 fw \ action pedit munge offset 148 u8 invert \ pipe csum tcp \ - index 100 || exit 1 + index 100 || return ${ksft_skip} +} + +reset_with_fail() +{ + reset "${1}" || return 1 + shift + + ip netns exec $ns1 sysctl -q net.mptcp.checksum_enabled=1 + ip netns exec $ns2 sysctl -q net.mptcp.checksum_enabled=1 + + local rc=0 + setup_fail_rules "${@}" || rc=$? + + if [ ${rc} -eq ${ksft_skip} ]; then + mark_as_skipped "unable to set the 'fail' rules" + return 1 + fi }
reset_with_events() @@ -382,6 +398,25 @@ reset_with_events() evts_ns2_pid=$! }
+reset_with_tcp_filter() +{ + reset "${1}" || return 1 + shift + + local ns="${!1}" + local src="${2}" + local target="${3}" + + if ! ip netns exec "${ns}" ${iptables} \ + -A INPUT \ + -s "${src}" \ + -p tcp \ + -j "${target}"; then + mark_as_skipped "unable to set the filter rules" + return 1 + fi +} + fail_test() { ret=1 @@ -745,15 +780,6 @@ pm_nl_check_endpoint() fi }
-filter_tcp_from() -{ - local ns="${1}" - local src="${2}" - local target="${3}" - - ip netns exec "${ns}" ${iptables} -A INPUT -s "${src}" -p tcp -j "${target}" -} - do_transfer() { local listener_ns="$1" @@ -1975,23 +2001,23 @@ subflows_error_tests() fi
# multiple subflows, with subflow creation error - if reset "multi subflows, with failing subflow"; then + if reset_with_tcp_filter "multi subflows, with failing subflow" ns1 10.0.3.2 REJECT && + continue_if mptcp_lib_kallsyms_has "mptcp_pm_subflow_check_next$"; then pm_nl_set_limits $ns1 0 2 pm_nl_set_limits $ns2 0 2 pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow - filter_tcp_from $ns1 10.0.3.2 REJECT run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow chk_join_nr 1 1 1 fi
# multiple subflows, with subflow timeout on MPJ - if reset "multi subflows, with subflow timeout"; then + if reset_with_tcp_filter "multi subflows, with subflow timeout" ns1 10.0.3.2 DROP && + continue_if mptcp_lib_kallsyms_has "mptcp_pm_subflow_check_next$"; then pm_nl_set_limits $ns1 0 2 pm_nl_set_limits $ns2 0 2 pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow - filter_tcp_from $ns1 10.0.3.2 DROP run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow chk_join_nr 1 1 1 fi @@ -1999,11 +2025,11 @@ subflows_error_tests() # multiple subflows, check that the endpoint corresponding to # closed subflow (due to reset) is not reused if additional # subflows are added later - if reset "multi subflows, fair usage on close"; then + if reset_with_tcp_filter "multi subflows, fair usage on close" ns1 10.0.3.2 REJECT && + continue_if mptcp_lib_kallsyms_has "mptcp_pm_subflow_check_next$"; then pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 0 1 pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow - filter_tcp_from $ns1 10.0.3.2 REJECT run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow &
# mpj subflow will be in TW after the reset
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features.
At some points, a new feature caused internal behaviour changes we are verifying in the selftests, see the Fixes tag below. It was not a uAPI change but because in these selftests, we check some internal behaviours, it is normal we have to adapt them from time to time after having added some features.
It is possible to look for "mptcp_pm_subflow_check_next" in kallsyms because it was needed to introduce the mentioned feature. So we can know in advance what the behaviour we are expecting here instead of supporting the two behaviours.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 86e39e04482b ("mptcp: keep track of local endpoint still available for each msk") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts matthieu.baerts@tessares.net --- tools/testing/selftests/net/mptcp/mptcp_join.sh | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-)
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh index c471934ad5e0..3da39febb09e 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@ -2129,11 +2129,18 @@ signal_address_tests() # the peer could possibly miss some addr notification, allow retransmission ip netns exec $ns1 sysctl -q net.mptcp.add_addr_timeout=1 run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow - chk_join_nr 3 3 3
- # the server will not signal the address terminating - # the MPC subflow - chk_add_nr 3 3 + # It is not directly linked to the commit introducing this + # symbol but for the parent one which is linked anyway. + if ! mptcp_lib_kallsyms_has "mptcp_pm_subflow_check_next$"; then + chk_join_nr 3 3 2 + chk_add_nr 4 4 + else + chk_join_nr 3 3 3 + # the server will not signal the address terminating + # the MPC subflow + chk_add_nr 3 3 + fi fi }
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features.
One of them is the support of MP_FASTCLOSE introduced in commit f284c0c77321 ("mptcp: implement fastclose xmit path").
If the MIB counter is not available, the test cannot be verified and the behaviour will not be the expected one. So we can skip the test if the counter is missing.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 01542c9bf9ab ("selftests: mptcp: add fastclose testcase") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts matthieu.baerts@tessares.net --- tools/testing/selftests/net/mptcp/mptcp_join.sh | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-)
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh index 3da39febb09e..cfd43037c6d5 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@ -261,6 +261,19 @@ reset() return 0 }
+# $1: test name ; $2: counter to check +reset_check_counter() +{ + reset "${1}" || return 1 + + local counter="${2}" + + if ! nstat -asz "${counter}" | grep -wq "${counter}"; then + mark_as_skipped "counter '${counter}' is not available" + return 1 + fi +} + # $1: test name reset_with_cookies() { @@ -3121,14 +3134,14 @@ fullmesh_tests()
fastclose_tests() { - if reset "fastclose test"; then + if reset_check_counter "fastclose test" "MPTcpExtMPFastcloseTx"; then run_tests $ns1 $ns2 10.0.1.1 1024 0 fastclose_client chk_join_nr 0 0 0 chk_fclose_nr 1 1 chk_rst_nr 1 1 invert fi
- if reset "fastclose server test"; then + if reset_check_counter "fastclose server test" "MPTcpExtMPFastcloseRx"; then run_tests $ns1 $ns2 10.0.1.1 1024 0 fastclose_server chk_join_nr 0 0 0 chk_fclose_nr 1 1 invert
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features.
At some points, a new feature caused internal behaviour changes we are verifying in the selftests, see the Fixes tag below. It was not a UAPI change but because in these selftests, we check some internal behaviours, it is normal we have to adapt them from time to time after having added some features.
It looks like there is no external sign we can use to predict the expected behaviour. Instead of accepting different behaviours and thus not really checking for the expected behaviour, we are looking here for a specific kernel version. That's not ideal but it looks better than removing the test because it cannot support older kernel versions.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 6fa0174a7c86 ("mptcp: more careful RM_ADDR generation") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts matthieu.baerts@tessares.net --- tools/testing/selftests/net/mptcp/mptcp_join.sh | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh index cfd43037c6d5..3d4f22fe8f8c 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@ -2394,7 +2394,12 @@ remove_tests() pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow run_tests $ns1 $ns2 10.0.1.1 0 -8 -8 slow chk_join_nr 3 3 3 - chk_rm_nr 0 3 simult + + if mptcp_lib_kversion_ge 5.18; then + chk_rm_nr 0 3 simult + else + chk_rm_nr 3 3 + fi fi
# addresses flush
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features.
One of them is the support of the implicit endpoints introduced by commit d045b9eb95a9 ("mptcp: introduce implicit endpoints").
It is possible to look for "mptcp_subflow_send_ack" in kallsyms because it was needed to introduce the mentioned feature. So we can know in advance if the feature is supported instead of trying and accepting any results.
Note that here and in the following commits, we re-do the same check for each sub-test of the same function for a few reasons. The main one is not to break the ID assign to each test in order to be able to easily compare results between different kernel versions. Also, we can still run a specific test even if it is skipped. Another reason is that it makes it clear during the review that a specific subtest will be skipped or not under certain conditions. At the end, it looks OK to call the exact same helper multiple times: it is not a critical path and it is the same code that is executed, not really more cases to maintain.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 69c6ce7b6eca ("selftests: mptcp: add implicit endpoint test case") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts matthieu.baerts@tessares.net --- tools/testing/selftests/net/mptcp/mptcp_join.sh | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh index 3d4f22fe8f8c..7f860a93527f 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@ -3272,8 +3272,10 @@ userspace_tests()
endpoint_tests() { + # subflow_rebuild_header is needed to support the implicit flag # userspace pm type prevents add_addr - if reset "implicit EP"; then + if reset "implicit EP" && + mptcp_lib_kallsyms_has "subflow_rebuild_header$"; then pm_nl_set_limits $ns1 2 2 pm_nl_set_limits $ns2 2 2 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal @@ -3293,7 +3295,8 @@ endpoint_tests() kill_tests_wait fi
- if reset "delete and re-add"; then + if reset "delete and re-add" && + mptcp_lib_kallsyms_has "subflow_rebuild_header$"; then pm_nl_set_limits $ns1 1 1 pm_nl_set_limits $ns2 1 1 pm_nl_add_endpoint $ns2 10.0.2.2 id 2 dev ns2eth2 flags subflow
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features.
Commit bccefb762439 ("selftests: mptcp: simplify pm_nl_change_endpoint") has simplified the way the backup flag is set on an endpoint. Instead of doing:
./pm_nl_ctl set 10.0.2.1 flags backup
Now we do:
./pm_nl_ctl set id 1 flags backup
The new way is easier to maintain but it is also incompatible with older kernels not supporting the implicit endpoints putting in place the infrastructure to set flags per ID, hence the second Fixes tag.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: bccefb762439 ("selftests: mptcp: simplify pm_nl_change_endpoint") Cc: stable@vger.kernel.org Fixes: 4cf86ae84c71 ("mptcp: strict local address ID selection") Signed-off-by: Matthieu Baerts matthieu.baerts@tessares.net --- tools/testing/selftests/net/mptcp/mptcp_join.sh | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh index 7f860a93527f..adbe297a95cf 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@ -2679,7 +2679,8 @@ mixed_tests() backup_tests() { # single subflow, backup - if reset "single subflow, backup"; then + if reset "single subflow, backup" && + continue_if mptcp_lib_kallsyms_has "subflow_rebuild_header$"; then pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 0 1 pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow,backup @@ -2689,7 +2690,8 @@ backup_tests() fi
# single address, backup - if reset "single address, backup"; then + if reset "single address, backup" && + continue_if mptcp_lib_kallsyms_has "subflow_rebuild_header$"; then pm_nl_set_limits $ns1 0 1 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal pm_nl_set_limits $ns2 1 1 @@ -2700,7 +2702,8 @@ backup_tests() fi
# single address with port, backup - if reset "single address with port, backup"; then + if reset "single address with port, backup" && + continue_if mptcp_lib_kallsyms_has "subflow_rebuild_header$"; then pm_nl_set_limits $ns1 0 1 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100 pm_nl_set_limits $ns2 1 1
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features.
One of them is the support of the fullmesh flag for the in-kernel PM introduced by commit 2843ff6f36db ("mptcp: remote addresses fullmesh") and commit 1a0d6136c5f0 ("mptcp: local addresses fullmesh").
It looks like there is no easy external sign we can use to predict the expected behaviour. We could add the flag and then check if it has been added but for that, and for each fullmesh test, we would need to setup a new environment, do the checks, clean it and then only start the test from yet another clean environment. To keep it simple and avoid introducing new issues, we look for a specific kernel version. That's not ideal but an acceptable solution for this case.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 6a0653b96f5d ("selftests: mptcp: add fullmesh setting tests") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts matthieu.baerts@tessares.net --- tools/testing/selftests/net/mptcp/mptcp_join.sh | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh index adbe297a95cf..f8e58ebcdd54 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@ -3098,7 +3098,8 @@ fullmesh_tests() fi
# set fullmesh flag - if reset "set fullmesh flag test"; then + if reset "set fullmesh flag test" && + continue_if mptcp_lib_kversion_ge 5.18; then pm_nl_set_limits $ns1 4 4 pm_nl_add_endpoint $ns1 10.0.2.1 flags subflow pm_nl_set_limits $ns2 4 4 @@ -3108,7 +3109,8 @@ fullmesh_tests() fi
# set nofullmesh flag - if reset "set nofullmesh flag test"; then + if reset "set nofullmesh flag test" && + continue_if mptcp_lib_kversion_ge 5.18; then pm_nl_set_limits $ns1 4 4 pm_nl_add_endpoint $ns1 10.0.2.1 flags subflow,fullmesh pm_nl_set_limits $ns2 4 4 @@ -3118,7 +3120,8 @@ fullmesh_tests() fi
# set backup,fullmesh flags - if reset "set backup,fullmesh flags test"; then + if reset "set backup,fullmesh flags test" && + continue_if mptcp_lib_kversion_ge 5.18; then pm_nl_set_limits $ns1 4 4 pm_nl_add_endpoint $ns1 10.0.2.1 flags subflow pm_nl_set_limits $ns2 4 4 @@ -3129,7 +3132,8 @@ fullmesh_tests() fi
# set nobackup,nofullmesh flags - if reset "set nobackup,nofullmesh flags test"; then + if reset "set nobackup,nofullmesh flags test" && + continue_if mptcp_lib_kversion_ge 5.18; then pm_nl_set_limits $ns1 4 4 pm_nl_set_limits $ns2 4 4 pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow,backup,fullmesh
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features.
One of them is the support of the userspace PM introduced by commit 4638de5aefe5 ("mptcp: handle local addrs announced by userspace PMs") and the following ones.
It is possible to look for the MPTCP pm_type's sysctl knob to know in advance if the userspace PM is available.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 5ac1d2d63451 ("selftests: mptcp: Add tests for userspace PM type") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts matthieu.baerts@tessares.net --- tools/testing/selftests/net/mptcp/mptcp_join.sh | 26 ++++++++++++++++--------- 1 file changed, 17 insertions(+), 9 deletions(-)
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh index f8e58ebcdd54..f9161ed69b86 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@ -84,7 +84,7 @@ init_partial() ip netns add $netns || exit $ksft_skip ip -net $netns link set lo up ip netns exec $netns sysctl -q net.mptcp.enabled=1 - ip netns exec $netns sysctl -q net.mptcp.pm_type=0 + ip netns exec $netns sysctl -q net.mptcp.pm_type=0 2>/dev/null || true ip netns exec $netns sysctl -q net.ipv4.conf.all.rp_filter=0 ip netns exec $netns sysctl -q net.ipv4.conf.default.rp_filter=0 if [ $checksum -eq 1 ]; then @@ -3191,7 +3191,8 @@ fail_tests() userspace_tests() { # userspace pm type prevents add_addr - if reset "userspace pm type prevents add_addr"; then + if reset "userspace pm type prevents add_addr" && + continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then set_userspace_pm $ns1 pm_nl_set_limits $ns1 0 2 pm_nl_set_limits $ns2 0 2 @@ -3202,7 +3203,8 @@ userspace_tests() fi
# userspace pm type does not echo add_addr without daemon - if reset "userspace pm no echo w/o daemon"; then + if reset "userspace pm no echo w/o daemon" && + continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then set_userspace_pm $ns2 pm_nl_set_limits $ns1 0 2 pm_nl_set_limits $ns2 0 2 @@ -3213,7 +3215,8 @@ userspace_tests() fi
# userspace pm type rejects join - if reset "userspace pm type rejects join"; then + if reset "userspace pm type rejects join" && + continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then set_userspace_pm $ns1 pm_nl_set_limits $ns1 1 1 pm_nl_set_limits $ns2 1 1 @@ -3223,7 +3226,8 @@ userspace_tests() fi
# userspace pm type does not send join - if reset "userspace pm type does not send join"; then + if reset "userspace pm type does not send join" && + continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then set_userspace_pm $ns2 pm_nl_set_limits $ns1 1 1 pm_nl_set_limits $ns2 1 1 @@ -3233,7 +3237,8 @@ userspace_tests() fi
# userspace pm type prevents mp_prio - if reset "userspace pm type prevents mp_prio"; then + if reset "userspace pm type prevents mp_prio" && + continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then set_userspace_pm $ns1 pm_nl_set_limits $ns1 1 1 pm_nl_set_limits $ns2 1 1 @@ -3244,7 +3249,8 @@ userspace_tests() fi
# userspace pm type prevents rm_addr - if reset "userspace pm type prevents rm_addr"; then + if reset "userspace pm type prevents rm_addr" && + continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then set_userspace_pm $ns1 set_userspace_pm $ns2 pm_nl_set_limits $ns1 0 1 @@ -3256,7 +3262,8 @@ userspace_tests() fi
# userspace pm add & remove address - if reset_with_events "userspace pm add & remove address"; then + if reset_with_events "userspace pm add & remove address" && + continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then set_userspace_pm $ns1 pm_nl_set_limits $ns2 1 1 run_tests $ns1 $ns2 10.0.1.1 0 userspace_1 0 slow @@ -3267,7 +3274,8 @@ userspace_tests() fi
# userspace pm create destroy subflow - if reset_with_events "userspace pm create destroy subflow"; then + if reset_with_events "userspace pm create destroy subflow" && + continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then set_userspace_pm $ns2 pm_nl_set_limits $ns1 0 1 run_tests $ns1 $ns2 10.0.1.1 0 0 userspace_1 slow
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features.
One of them is the support of the MP_FAIL / infinite mapping introduced by commit 1e39e5a32ad7 ("mptcp: infinite mapping sending") and the following ones.
It is possible to look for one of the infinite mapping counters to know in advance if the this feature is available.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: b6e074e171bc ("selftests: mptcp: add infinite map testcase") Cc: stable@vger.kernel.org Fixes: 2ba18161d407 ("selftests: mptcp: add MP_FAIL reset testcase") Signed-off-by: Matthieu Baerts matthieu.baerts@tessares.net --- tools/testing/selftests/net/mptcp/mptcp_join.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh index f9161ed69b86..7867bad59253 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@ -384,7 +384,7 @@ setup_fail_rules()
reset_with_fail() { - reset "${1}" || return 1 + reset_check_counter "${1}" "MPTcpExtInfiniteMapTx" || return 1 shift
ip netns exec $ns1 sysctl -q net.mptcp.checksum_enabled=1
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features.
One of them is the support of sending an MP_PRIO signal for the initial subflow, introduced by commit c157bbe776b7 ("mptcp: allow the in kernel PM to set MPC subflow priority").
It is possible to look for "mptcp_subflow_send_ack" in kallsyms because it was needed to introduce the mentioned feature. So we can know in advance if the feature is supported instead of trying and accepting any results.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 914f6a59b10f ("selftests: mptcp: add MPC backup tests") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts matthieu.baerts@tessares.net --- tools/testing/selftests/net/mptcp/mptcp_join.sh | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh index 7867bad59253..554fcafd6e8a 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@ -2713,14 +2713,16 @@ backup_tests() chk_prio_nr 1 1 fi
- if reset "mpc backup"; then + if reset "mpc backup" && + continue_if mptcp_lib_kallsyms_doesnt_have "mptcp_subflow_send_ack$"; then pm_nl_add_endpoint $ns2 10.0.1.2 flags subflow,backup run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow chk_join_nr 0 0 0 chk_prio_nr 0 1 fi
- if reset "mpc backup both sides"; then + if reset "mpc backup both sides" && + continue_if mptcp_lib_kallsyms_doesnt_have "mptcp_subflow_send_ack$"; then pm_nl_add_endpoint $ns1 10.0.1.1 flags subflow,backup pm_nl_add_endpoint $ns2 10.0.1.2 flags subflow,backup run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow @@ -2728,14 +2730,16 @@ backup_tests() chk_prio_nr 1 1 fi
- if reset "mpc switch to backup"; then + if reset "mpc switch to backup" && + continue_if mptcp_lib_kallsyms_doesnt_have "mptcp_subflow_send_ack$"; then pm_nl_add_endpoint $ns2 10.0.1.2 flags subflow run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow backup chk_join_nr 0 0 0 chk_prio_nr 0 1 fi
- if reset "mpc switch to backup both sides"; then + if reset "mpc switch to backup both sides" && + continue_if mptcp_lib_kallsyms_doesnt_have "mptcp_subflow_send_ack$"; then pm_nl_add_endpoint $ns1 10.0.1.1 flags subflow pm_nl_add_endpoint $ns2 10.0.1.2 flags subflow run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow backup
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features.
One of them is the support of PM listener events introduced by commit f8c9dfbd875b ("mptcp: add pm listener events").
It is possible to look for "mptcp_event_pm_listener" in kallsyms to know in advance if the kernel supports this feature.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 178d023208eb ("selftests: mptcp: listener test for in-kernel PM") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts matthieu.baerts@tessares.net --- tools/testing/selftests/net/mptcp/mptcp_join.sh | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh index 554fcafd6e8a..0c22efeba675 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@ -2774,6 +2774,11 @@ verify_listener_events() $e_saddr $e_sport fi
+ if ! mptcp_lib_kallsyms_has "mptcp_event_pm_listener$"; then + printf "[skip]: event not supported\n" + return + fi + type=$(grep "type:$e_type," $evt | sed --unbuffered -n 's/.*(type:)([[:digit:]]*).*$/\2/p;q') family=$(grep "type:$e_type," $evt |
The alignment was different from the other tests because tabs were used instead of spaces.
While at it, also use 'echo' instead of 'printf' to print the result to keep the same style as done in the other sub-tests. And, even if it should be better with, also remove 'stdbuf' and sed's '--unbuffered' option because they are not used in the other subtests and they are not available when using a minimal environment with busybox.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 178d023208eb ("selftests: mptcp: listener test for in-kernel PM") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts matthieu.baerts@tessares.net --- tools/testing/selftests/net/mptcp/mptcp_join.sh | 30 ++++++++++++------------- 1 file changed, 14 insertions(+), 16 deletions(-)
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh index 0c22efeba675..281581d3c8eb 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@ -2765,43 +2765,41 @@ verify_listener_events() local family local saddr local sport + local name
if [ $e_type = $LISTENER_CREATED ]; then - stdbuf -o0 -e0 printf "\t\t\t\t\t CREATE_LISTENER %s:%s"\ - $e_saddr $e_sport + name="LISTENER_CREATED" elif [ $e_type = $LISTENER_CLOSED ]; then - stdbuf -o0 -e0 printf "\t\t\t\t\t CLOSE_LISTENER %s:%s "\ - $e_saddr $e_sport + name="LISTENER_CLOSED" + else + name="$e_type" fi
+ printf "%-${nr_blank}s %s %s:%s " " " "$name" "$e_saddr" "$e_sport" + if ! mptcp_lib_kallsyms_has "mptcp_event_pm_listener$"; then printf "[skip]: event not supported\n" return fi
- type=$(grep "type:$e_type," $evt | - sed --unbuffered -n 's/.*(type:)([[:digit:]]*).*$/\2/p;q') - family=$(grep "type:$e_type," $evt | - sed --unbuffered -n 's/.*(family:)([[:digit:]]*).*$/\2/p;q') - sport=$(grep "type:$e_type," $evt | - sed --unbuffered -n 's/.*(sport:)([[:digit:]]*).*$/\2/p;q') + type=$(grep "type:$e_type," $evt | sed -n 's/.*(type:)([[:digit:]]*).*$/\2/p;q') + family=$(grep "type:$e_type," $evt | sed -n 's/.*(family:)([[:digit:]]*).*$/\2/p;q') + sport=$(grep "type:$e_type," $evt | sed -n 's/.*(sport:)([[:digit:]]*).*$/\2/p;q') if [ $family ] && [ $family = $AF_INET6 ]; then - saddr=$(grep "type:$e_type," $evt | - sed --unbuffered -n 's/.*(saddr6:)([0-9a-f:.]*).*$/\2/p;q') + saddr=$(grep "type:$e_type," $evt | sed -n 's/.*(saddr6:)([0-9a-f:.]*).*$/\2/p;q') else - saddr=$(grep "type:$e_type," $evt | - sed --unbuffered -n 's/.*(saddr4:)([0-9.]*).*$/\2/p;q') + saddr=$(grep "type:$e_type," $evt | sed -n 's/.*(saddr4:)([0-9.]*).*$/\2/p;q') fi
if [ $type ] && [ $type = $e_type ] && [ $family ] && [ $family = $e_family ] && [ $saddr ] && [ $saddr = $e_saddr ] && [ $sport ] && [ $sport = $e_sport ]; then - stdbuf -o0 -e0 printf "[ ok ]\n" + echo "[ ok ]" return 0 fi fail_test - stdbuf -o0 -e0 printf "[fail]\n" + echo "[fail]" }
add_addr_ports_tests()
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features.
One of them is the support of a mix of subflows in v4 and v6 by the in-kernel PM introduced by commit b9d69db87fb7 ("mptcp: let the in-kernel PM use mixed IPv4 and IPv6 addresses").
It looks like there is no external sign we can use to predict the expected behaviour. Instead of accepting different behaviours and thus not really checking for the expected behaviour, we are looking here for a specific kernel version. That's not ideal but it looks better than removing the test because it cannot support older kernel versions.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: ad3493746ebe ("selftests: mptcp: add test-cases for mixed v4/v6 subflows") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts matthieu.baerts@tessares.net --- tools/testing/selftests/net/mptcp/mptcp_join.sh | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh index 281581d3c8eb..0ae8cafde439 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@ -2637,7 +2637,8 @@ v4mapped_tests()
mixed_tests() { - if reset "IPv4 sockets do not use IPv6 addresses"; then + if reset "IPv4 sockets do not use IPv6 addresses" && + continue_if mptcp_lib_kversion_ge 6.3; then pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 1 1 pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal @@ -2646,7 +2647,8 @@ mixed_tests() fi
# Need an IPv6 mptcp socket to allow subflows of both families - if reset "simult IPv4 and IPv6 subflows"; then + if reset "simult IPv4 and IPv6 subflows" && + continue_if mptcp_lib_kversion_ge 6.3; then pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 1 1 pm_nl_add_endpoint $ns1 10.0.1.1 flags signal @@ -2655,7 +2657,8 @@ mixed_tests() fi
# cross families subflows will not be created even in fullmesh mode - if reset "simult IPv4 and IPv6 subflows, fullmesh 1x1"; then + if reset "simult IPv4 and IPv6 subflows, fullmesh 1x1" && + continue_if mptcp_lib_kversion_ge 6.3; then pm_nl_set_limits $ns1 0 4 pm_nl_set_limits $ns2 1 4 pm_nl_add_endpoint $ns2 dead:beef:2::2 flags subflow,fullmesh @@ -2666,7 +2669,8 @@ mixed_tests()
# fullmesh still tries to create all the possibly subflows with # matching family - if reset "simult IPv4 and IPv6 subflows, fullmesh 2x2"; then + if reset "simult IPv4 and IPv6 subflows, fullmesh 2x2" && + continue_if mptcp_lib_kversion_ge 6.3; then pm_nl_set_limits $ns1 0 4 pm_nl_set_limits $ns2 2 4 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
linux-kselftest-mirror@lists.linaro.org
-
Matthieu Baerts -
patchwork-bot+netdevbpf＠kernel.org