From: Jason A. Donenfeld Jason@zx2c4.com

commit c01d4d0a82b71857be7449380338bc53dde2da92 upstream.

random.c ratelimits how much it warns about uninitialized urandom reads using __ratelimit(). When the RNG is finally initialized, it prints the number of missed messages due to ratelimiting.

It has been this way since that functionality was introduced back in 2018. Recently, cc1e127bfa95 ("random: remove ratelimiting for in-kernel unseeded randomness") put a bit more stress on the urandom ratelimiting, which teased out a bug in the implementation.

Specifically, when under pressure, __ratelimit() will print its own message and reset the count back to 0, making the final message at the end less useful. Secondly, it does so as a pr_warn(), which apparently is undesirable for people's CI.

Fortunately, __ratelimit() has the RATELIMIT_MSG_ON_RELEASE flag exactly for this purpose, so we set the flag.

Fixes: 4e00b339e264 ("random: rate limit unseeded randomness warnings") Cc: stable@vger.kernel.org Reported-by: Jon Hunter jonathanh@nvidia.com Reported-by: Ron Economos re@w6rz.net Tested-by: Ron Economos re@w6rz.net Signed-off-by: Jason A. Donenfeld Jason@zx2c4.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/char/random.c | 2 +- include/linux/ratelimit_types.h | 12 ++++++++---- 2 files changed, 9 insertions(+), 5 deletions(-)

--- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -87,7 +87,7 @@ static RAW_NOTIFIER_HEAD(random_ready_ch

/* Control how we warn userspace. */ static struct ratelimit_state urandom_warning = - RATELIMIT_STATE_INIT("warn_urandom_randomness", HZ, 3); + RATELIMIT_STATE_INIT_FLAGS("urandom_warning", HZ, 3, RATELIMIT_MSG_ON_RELEASE); static int ratelimit_disable __read_mostly = IS_ENABLED(CONFIG_WARN_ALL_UNSEEDED_RANDOM); module_param_named(ratelimit_disable, ratelimit_disable, int, 0644); --- a/include/linux/ratelimit_types.h +++ b/include/linux/ratelimit_types.h @@ -23,12 +23,16 @@ struct ratelimit_state { unsigned long flags; };

-#define RATELIMIT_STATE_INIT(name, interval_init, burst_init) { \ - .lock = __RAW_SPIN_LOCK_UNLOCKED(name.lock), \ - .interval = interval_init, \ - .burst = burst_init, \ +#define RATELIMIT_STATE_INIT_FLAGS(name, interval_init, burst_init, flags_init) { \ + .lock = __RAW_SPIN_LOCK_UNLOCKED(name.lock), \ + .interval = interval_init, \ + .burst = burst_init, \ + .flags = flags_init, \ }

+#define RATELIMIT_STATE_INIT(name, interval_init, burst_init) \ + RATELIMIT_STATE_INIT_FLAGS(name, interval_init, burst_init, 0) + #define RATELIMIT_STATE_INIT_DISABLED \ RATELIMIT_STATE_INIT(ratelimit_state, 0, DEFAULT_RATELIMIT_BURST)

From: Takashi Iwai tiwai@suse.de

commit c7807b27d510e5aa53c8a120cfc02c33c24ebb5f upstream.

Like the previous fix for Conexant codec, the beep_nid has to be set up before calling snd_hda_gen_parse_auto_config(); otherwise it'd miss the path setup.

Fix the call order for addressing the missing beep setup.

Fixes: 0e8f9862493a ("ALSA: hda/via - Simplify control management") Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=216152 Link: https://lore.kernel.org/r/20220620104008.1994-2-tiwai@suse.de Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/pci/hda/patch_via.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/sound/pci/hda/patch_via.c +++ b/sound/pci/hda/patch_via.c @@ -520,11 +520,11 @@ static int via_parse_auto_config(struct if (err < 0) return err;

- err = snd_hda_gen_parse_auto_config(codec, &spec->gen.autocfg); + err = auto_parse_beep(codec); if (err < 0) return err;

- err = auto_parse_beep(codec); + err = snd_hda_gen_parse_auto_config(codec, &spec->gen.autocfg); if (err < 0) return err;

From: Takashi Iwai tiwai@suse.de

commit 5faa0bc69102f3a4c605581564c367be5eb94dfa upstream.

Currently the Conexant codec driver sets up the beep NID after calling snd_hda_gen_parse_auto_config(). It turned out that this results in the insufficient setup for the beep control, as the generic parser handles the fake path in snd_hda_gen_parse_auto_config() only if the beep_nid is set up beforehand.

For dealing with the beep widget properly, call cx_auto_parse_beep() before snd_hda_gen_parse_auto_config() call.

Fixes: 51e19ca5f755 ("ALSA: hda/conexant - Clean up beep code") Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=216152 Link: https://lore.kernel.org/r/20220620104008.1994-1-tiwai@suse.de Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/pci/hda/patch_conexant.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -1079,11 +1079,11 @@ static int patch_conexant_auto(struct hd if (err < 0) goto error;

- err = snd_hda_gen_parse_auto_config(codec, &spec->gen.autocfg); + err = cx_auto_parse_beep(codec); if (err < 0) goto error;

- err = cx_auto_parse_beep(codec); + err = snd_hda_gen_parse_auto_config(codec, &spec->gen.autocfg); if (err < 0) goto error;

From: Kailang Yang kailang@realtek.com

commit fe6900bd8156467365bd5b976df64928fdebfeb0 upstream.

There is not have Headset Mic verb table in BIOS default. So, it will have recording issue from headset MIC. Add the verb table value without jack detect. It will turn on Headset Mic.

Signed-off-by: Kailang Yang kailang@realtek.com Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/719133a27d8844a890002cb817001dfa@realtek.com Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/pci/hda/patch_realtek.c | 9 +++++++++ 1 file changed, 9 insertions(+)

--- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -10790,6 +10790,7 @@ enum { ALC668_FIXUP_MIC_DET_COEF, ALC897_FIXUP_LENOVO_HEADSET_MIC, ALC897_FIXUP_HEADSET_MIC_PIN, + ALC897_FIXUP_HP_HSMIC_VERB, };

static const struct hda_fixup alc662_fixups[] = { @@ -11209,6 +11210,13 @@ static const struct hda_fixup alc662_fix .chained = true, .chain_id = ALC897_FIXUP_LENOVO_HEADSET_MIC }, + [ALC897_FIXUP_HP_HSMIC_VERB] = { + .type = HDA_FIXUP_PINS, + .v.pins = (const struct hda_pintbl[]) { + { 0x19, 0x01a1913c }, /* use as headset mic, without its own jack detect */ + { } + }, + }, };

static const struct snd_pci_quirk alc662_fixup_tbl[] = { @@ -11234,6 +11242,7 @@ static const struct snd_pci_quirk alc662 SND_PCI_QUIRK(0x1028, 0x0698, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x069f, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x103c, 0x1632, "HP RP5800", ALC662_FIXUP_HP_RP5800), + SND_PCI_QUIRK(0x103c, 0x8719, "HP", ALC897_FIXUP_HP_HSMIC_VERB), SND_PCI_QUIRK(0x103c, 0x873e, "HP", ALC671_FIXUP_HP_HEADSET_MIC2), SND_PCI_QUIRK(0x103c, 0x885f, "HP 288 Pro G8", ALC671_FIXUP_HP_HEADSET_MIC2), SND_PCI_QUIRK(0x1043, 0x1080, "Asus UX501VW", ALC668_FIXUP_HEADSET_MODE),

From: Tim Crawford tcrawford@system76.com

commit d49951219b0249d3eff49e4f02e0de82357bc8a0 upstream.

Fixes speaker output and headset detection on Clevo PD70PNT.

Signed-off-by: Tim Crawford tcrawford@system76.com Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220617133028.50568-1-tcrawford@system76.com Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+)

--- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -2634,6 +2634,7 @@ static const struct snd_pci_quirk alc882 SND_PCI_QUIRK(0x1558, 0x67e1, "Clevo PB71[DE][CDF]", ALC1220_FIXUP_CLEVO_PB51ED_PINS), SND_PCI_QUIRK(0x1558, 0x67e5, "Clevo PC70D[PRS](?:-D|-G)?", ALC1220_FIXUP_CLEVO_PB51ED_PINS), SND_PCI_QUIRK(0x1558, 0x67f1, "Clevo PC70H[PRS]", ALC1220_FIXUP_CLEVO_PB51ED_PINS), + SND_PCI_QUIRK(0x1558, 0x67f5, "Clevo PD70PN[NRT]", ALC1220_FIXUP_CLEVO_PB51ED_PINS), SND_PCI_QUIRK(0x1558, 0x70d1, "Clevo PC70[ER][CDF]", ALC1220_FIXUP_CLEVO_PB51ED_PINS), SND_PCI_QUIRK(0x1558, 0x7714, "Clevo X170SM", ALC1220_FIXUP_CLEVO_PB51ED_PINS), SND_PCI_QUIRK(0x1558, 0x7715, "Clevo X170KM-G", ALC1220_FIXUP_CLEVO_PB51ED),

From: Rosemarie O'Riorden roriorden@redhat.com

commit 12378a5a75e33f34f8586706eb61cca9e6d4690c upstream.

When a packet enters the OVS datapath and does not match any existing flows installed in the kernel flow cache, the packet will be sent to userspace to be parsed, and a new flow will be created. The kernel and OVS rely on each other to parse packet fields in the same way so that packets will be handled properly.

As per the design document linked below, OVS expects all later IPv6 fragments to have nw_proto=44 in the flow key, so they can be correctly matched on OpenFlow rules. OpenFlow controllers create pipelines based on this design.

This behavior was changed by the commit in the Fixes tag so that nw_proto equals the next_header field of the last extension header. However, there is no counterpart for this change in OVS userspace, meaning that this field is parsed differently between OVS and the kernel. This is a problem because OVS creates actions based on what is parsed in userspace, but the kernel-provided flow key is used as a match criteria, as described in Documentation/networking/openvswitch.rst. This leads to issues such as packets incorrectly matching on a flow and thus the wrong list of actions being applied to the packet. Such changes in packet parsing cannot be implemented without breaking the userspace.

The offending commit is partially reverted to restore the expected behavior.

The change technically made sense and there is a good reason that it was implemented, but it does not comply with the original design of OVS. If in the future someone wants to implement such a change, then it must be user-configurable and disabled by default to preserve backwards compatibility with existing OVS versions.

Cc: stable@vger.kernel.org Fixes: fa642f08839b ("openvswitch: Derive IP protocol number for IPv6 later frags") Link: https://docs.openvswitch.org/en/latest/topics/design/#fragments Signed-off-by: Rosemarie O'Riorden roriorden@redhat.com Acked-by: Eelco Chaudron echaudro@redhat.com Link: https://lore.kernel.org/r/20220621204845.9721-1-roriorden@redhat.com Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/openvswitch/flow.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/openvswitch/flow.c +++ b/net/openvswitch/flow.c @@ -407,7 +407,7 @@ static int parse_ipv6hdr(struct sk_buff if (flags & IP6_FH_F_FRAG) { if (frag_off) { key->ip.frag = OVS_FRAG_TYPE_LATER; - key->ip.proto = nexthdr; + key->ip.proto = NEXTHDR_FRAGMENT; return 0; } key->ip.frag = OVS_FRAG_TYPE_FIRST;

From: Tyler Hicks tyhicks@linux.microsoft.com

commit 2a3dcbccd64ba35c045fac92272ff981c4cbef44 upstream.

Decrement the refcount of the parent dentry's fid after walking each path component during a full path walk for a lookup. Failure to do so can lead to fids that are not clunked until the filesystem is unmounted, as indicated by this warning:

9pnet: found fid 3 not clunked

The improper refcounting after walking resulted in open(2) returning -EIO on any directories underneath the mount point when using the virtio transport. When using the fd transport, there's no apparent issue until the filesytem is unmounted and the warning above is emitted to the logs.

In some cases, the user may not yet be attached to the filesystem and a new root fid, associated with the user, is created and attached to the root dentry before the full path walk is performed. Increment the new root fid's refcount to two in that situation so that it can be safely decremented to one after it is used for the walk operation. The new fid will still be attached to the root dentry when v9fs_fid_lookup_with_uid() returns so a final refcount of one is correct/expected.

Link: https://lkml.kernel.org/r/20220527000003.355812-2-tyhicks@linux.microsoft.co... Link: https://lkml.kernel.org/r/20220612085330.1451496-4-asmadeus@codewreck.org Fixes: 6636b6dcc3db ("9p: add refcount to p9_fid struct") Cc: stable@vger.kernel.org Signed-off-by: Tyler Hicks tyhicks@linux.microsoft.com Reviewed-by: Christian Schoenebeck linux_oss@crudebyte.com [Dominique: fix clunking fid multiple times discussed in second link] Signed-off-by: Dominique Martinet asmadeus@codewreck.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/9p/fid.c | 22 +++++++++------------- 1 file changed, 9 insertions(+), 13 deletions(-)

--- a/fs/9p/fid.c +++ b/fs/9p/fid.c @@ -152,7 +152,7 @@ static struct p9_fid *v9fs_fid_lookup_wi const unsigned char **wnames, *uname; int i, n, l, clone, access; struct v9fs_session_info *v9ses; - struct p9_fid *fid, *old_fid = NULL; + struct p9_fid *fid, *old_fid;

v9ses = v9fs_dentry2v9ses(dentry); access = v9ses->flags & V9FS_ACCESS_MASK; @@ -194,13 +194,12 @@ static struct p9_fid *v9fs_fid_lookup_wi if (IS_ERR(fid)) return fid;

+ refcount_inc(&fid->count); v9fs_fid_add(dentry->d_sb->s_root, fid); } /* If we are root ourself just return that */ - if (dentry->d_sb->s_root == dentry) { - refcount_inc(&fid->count); + if (dentry->d_sb->s_root == dentry) return fid; - } /* * Do a multipath walk with attached root. * When walking parent we need to make sure we @@ -212,6 +211,7 @@ static struct p9_fid *v9fs_fid_lookup_wi fid = ERR_PTR(n); goto err_out; } + old_fid = fid; clone = 1; i = 0; while (i < n) { @@ -221,19 +221,15 @@ static struct p9_fid *v9fs_fid_lookup_wi * walk to ensure none of the patch component change */ fid = p9_client_walk(fid, l, &wnames[i], clone); + /* non-cloning walk will return the same fid */ + if (fid != old_fid) { + p9_client_clunk(old_fid); + old_fid = fid; + } if (IS_ERR(fid)) { - if (old_fid) { - /* - * If we fail, clunk fid which are mapping - * to path component and not the last component - * of the path. - */ - p9_client_clunk(old_fid); - } kfree(wnames); goto err_out; } - old_fid = fid; i += l; clone = 0; }

From: Dominique Martinet asmadeus@codewreck.org

commit e5690f263208c5abce7451370b7786eb25b405eb upstream.

we check for protocol version later than required, after a fid has been obtained. Just move the version check earlier.

Link: https://lkml.kernel.org/r/20220612085330.1451496-3-asmadeus@codewreck.org Fixes: 6636b6dcc3db ("9p: add refcount to p9_fid struct") Cc: stable@vger.kernel.org Reviewed-by: Tyler Hicks tyhicks@linux.microsoft.com Reviewed-by: Christian Schoenebeck linux_oss@crudebyte.com Signed-off-by: Dominique Martinet asmadeus@codewreck.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/9p/vfs_inode.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/fs/9p/vfs_inode.c +++ b/fs/9p/vfs_inode.c @@ -1250,15 +1250,15 @@ static const char *v9fs_vfs_get_link(str return ERR_PTR(-ECHILD);

v9ses = v9fs_dentry2v9ses(dentry); - fid = v9fs_fid_lookup(dentry); + if (!v9fs_proto_dotu(v9ses)) + return ERR_PTR(-EBADF); + p9_debug(P9_DEBUG_VFS, "%pd\n", dentry); + fid = v9fs_fid_lookup(dentry);

if (IS_ERR(fid)) return ERR_CAST(fid);

- if (!v9fs_proto_dotu(v9ses)) - return ERR_PTR(-EBADF); - st = p9_client_stat(fid); p9_client_clunk(fid); if (IS_ERR(st))

From: Filipe Manana fdmanana@suse.com

commit 31e70e527806c546a72262f2fc3d982ee23c42d3 upstream.

When we start an unmount, at close_ctree(), if we have the reclaim task running and in the middle of a data block group relocation, we can trigger a deadlock when stopping an async reclaim task, producing a trace like the following:

[629724.498185] task:kworker/u16:7 state:D stack: 0 pid:681170 ppid: 2 flags:0x00004000 [629724.499760] Workqueue: events_unbound btrfs_async_reclaim_metadata_space [btrfs] [629724.501267] Call Trace: [629724.501759] <TASK> [629724.502174] __schedule+0x3cb/0xed0 [629724.502842] schedule+0x4e/0xb0 [629724.503447] btrfs_wait_on_delayed_iputs+0x7c/0xc0 [btrfs] [629724.504534] ? prepare_to_wait_exclusive+0xc0/0xc0 [629724.505442] flush_space+0x423/0x630 [btrfs] [629724.506296] ? rcu_read_unlock_trace_special+0x20/0x50 [629724.507259] ? lock_release+0x220/0x4a0 [629724.507932] ? btrfs_get_alloc_profile+0xb3/0x290 [btrfs] [629724.508940] ? do_raw_spin_unlock+0x4b/0xa0 [629724.509688] btrfs_async_reclaim_metadata_space+0x139/0x320 [btrfs] [629724.510922] process_one_work+0x252/0x5a0 [629724.511694] ? process_one_work+0x5a0/0x5a0 [629724.512508] worker_thread+0x52/0x3b0 [629724.513220] ? process_one_work+0x5a0/0x5a0 [629724.514021] kthread+0xf2/0x120 [629724.514627] ? kthread_complete_and_exit+0x20/0x20 [629724.515526] ret_from_fork+0x22/0x30 [629724.516236] </TASK> [629724.516694] task:umount state:D stack: 0 pid:719055 ppid:695412 flags:0x00004000 [629724.518269] Call Trace: [629724.518746] <TASK> [629724.519160] __schedule+0x3cb/0xed0 [629724.519835] schedule+0x4e/0xb0 [629724.520467] schedule_timeout+0xed/0x130 [629724.521221] ? lock_release+0x220/0x4a0 [629724.521946] ? lock_acquired+0x19c/0x420 [629724.522662] ? trace_hardirqs_on+0x1b/0xe0 [629724.523411] __wait_for_common+0xaf/0x1f0 [629724.524189] ? usleep_range_state+0xb0/0xb0 [629724.524997] __flush_work+0x26d/0x530 [629724.525698] ? flush_workqueue_prep_pwqs+0x140/0x140 [629724.526580] ? lock_acquire+0x1a0/0x310 [629724.527324] __cancel_work_timer+0x137/0x1c0 [629724.528190] close_ctree+0xfd/0x531 [btrfs] [629724.529000] ? evict_inodes+0x166/0x1c0 [629724.529510] generic_shutdown_super+0x74/0x120 [629724.530103] kill_anon_super+0x14/0x30 [629724.530611] btrfs_kill_super+0x12/0x20 [btrfs] [629724.531246] deactivate_locked_super+0x31/0xa0 [629724.531817] cleanup_mnt+0x147/0x1c0 [629724.532319] task_work_run+0x5c/0xa0 [629724.532984] exit_to_user_mode_prepare+0x1a6/0x1b0 [629724.533598] syscall_exit_to_user_mode+0x16/0x40 [629724.534200] do_syscall_64+0x48/0x90 [629724.534667] entry_SYSCALL_64_after_hwframe+0x44/0xae [629724.535318] RIP: 0033:0x7fa2b90437a7 [629724.535804] RSP: 002b:00007ffe0b7e4458 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 [629724.536912] RAX: 0000000000000000 RBX: 00007fa2b9182264 RCX: 00007fa2b90437a7 [629724.538156] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000555d6cf20dd0 [629724.539053] RBP: 0000555d6cf20ba0 R08: 0000000000000000 R09: 00007ffe0b7e3200 [629724.539956] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [629724.540883] R13: 0000555d6cf20dd0 R14: 0000555d6cf20cb0 R15: 0000000000000000 [629724.541796] </TASK>

This happens because:

1) Before entering close_ctree() we have the async block group reclaim task running and relocating a data block group;

2) There's an async metadata (or data) space reclaim task running;

3) We enter close_ctree() and park the cleaner kthread;

4) The async space reclaim task is at flush_space() and runs all the existing delayed iputs;

5) Before the async space reclaim task calls btrfs_wait_on_delayed_iputs(), the block group reclaim task which is doing the data block group relocation, creates a delayed iput at replace_file_extents() (called when COWing leaves that have file extent items pointing to relocated data extents, during the merging phase of relocation roots);

6) The async reclaim space reclaim task blocks at btrfs_wait_on_delayed_iputs(), since we have a new delayed iput;

7) The task at close_ctree() then calls cancel_work_sync() to stop the async space reclaim task, but it blocks since that task is waiting for the delayed iput to be run;

8) The delayed iput is never run because the cleaner kthread is parked, and no one else runs delayed iputs, resulting in a hang.

So fix this by stopping the async block group reclaim task before we park the cleaner kthread.

Fixes: 18bb8bbf13c183 ("btrfs: zoned: automatically reclaim zones") CC: stable@vger.kernel.org # 5.15+ Signed-off-by: Filipe Manana fdmanana@suse.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/btrfs/disk-io.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-)

--- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -4639,6 +4639,17 @@ void __cold close_ctree(struct btrfs_fs_ int ret;

set_bit(BTRFS_FS_CLOSING_START, &fs_info->flags); + + /* + * We may have the reclaim task running and relocating a data block group, + * in which case it may create delayed iputs. So stop it before we park + * the cleaner kthread otherwise we can get new delayed iputs after + * parking the cleaner, and that can make the async reclaim task to hang + * if it's waiting for delayed iputs to complete, since the cleaner is + * parked and can not run delayed iputs - this will make us hang when + * trying to stop the async reclaim task. + */ + cancel_work_sync(&fs_info->reclaim_bgs_work); /* * We don't want the cleaner to start new transactions, add more delayed * iputs, etc. while we're closing. We can't use kthread_stop() yet @@ -4679,8 +4690,6 @@ void __cold close_ctree(struct btrfs_fs_ cancel_work_sync(&fs_info->async_data_reclaim_work); cancel_work_sync(&fs_info->preempt_reclaim_work);

- cancel_work_sync(&fs_info->reclaim_bgs_work); - /* Cancel or finish ongoing discard work */ btrfs_discard_cleanup(fs_info);

From: David Sterba dsterba@suse.com

commit e3a4167c880cf889f66887a152799df4d609dd21 upstream.

Almost none of the errors stemming from a valid mount option but wrong value prints a descriptive message which would help to identify why mount failed. Like in the linked report:

$ uname -r v4.19 $ mount -o compress=zstd /dev/sdb /mnt mount: /mnt: wrong fs type, bad option, bad superblock on /dev/sdb, missing codepage or helper program, or other error. $ dmesg ... BTRFS error (device sdb): open_ctree failed

Errors caused by memory allocation failures are left out as it's not a user error so reporting that would be confusing.

Link: https://lore.kernel.org/linux-btrfs/9c3fec36-fc61-3a33-4977-a7e207c3fa4e@gmx... CC: stable@vger.kernel.org # 4.9+ Reviewed-by: Qu Wenruo wqu@suse.com Reviewed-by: Nikolay Borisov nborisov@suse.com Reviewed-by: Anand Jain anand.jain@oracle.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/btrfs/super.c | 39 ++++++++++++++++++++++++++++++++------- 1 file changed, 32 insertions(+), 7 deletions(-)

--- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -763,6 +763,8 @@ int btrfs_parse_options(struct btrfs_fs_ compress_force = false; no_compress++; } else { + btrfs_err(info, "unrecognized compression value %s", + args[0].from); ret = -EINVAL; goto out; } @@ -821,8 +823,11 @@ int btrfs_parse_options(struct btrfs_fs_ case Opt_thread_pool: ret = match_int(&args[0], &intarg); if (ret) { + btrfs_err(info, "unrecognized thread_pool value %s", + args[0].from); goto out; } else if (intarg == 0) { + btrfs_err(info, "invalid value 0 for thread_pool"); ret = -EINVAL; goto out; } @@ -883,8 +888,11 @@ int btrfs_parse_options(struct btrfs_fs_ break; case Opt_ratio: ret = match_int(&args[0], &intarg); - if (ret) + if (ret) { + btrfs_err(info, "unrecognized metadata_ratio value %s", + args[0].from); goto out; + } info->metadata_ratio = intarg; btrfs_info(info, "metadata ratio %u", info->metadata_ratio); @@ -901,6 +909,8 @@ int btrfs_parse_options(struct btrfs_fs_ btrfs_set_and_info(info, DISCARD_ASYNC, "turning on async discard"); } else { + btrfs_err(info, "unrecognized discard mode value %s", + args[0].from); ret = -EINVAL; goto out; } @@ -933,6 +943,8 @@ int btrfs_parse_options(struct btrfs_fs_ btrfs_set_and_info(info, FREE_SPACE_TREE, "enabling free space tree"); } else { + btrfs_err(info, "unrecognized space_cache value %s", + args[0].from); ret = -EINVAL; goto out; } @@ -1014,8 +1026,12 @@ int btrfs_parse_options(struct btrfs_fs_ break; case Opt_check_integrity_print_mask: ret = match_int(&args[0], &intarg); - if (ret) + if (ret) { + btrfs_err(info, + "unrecognized check_integrity_print_mask value %s", + args[0].from); goto out; + } info->check_integrity_print_mask = intarg; btrfs_info(info, "check_integrity_print_mask 0x%x", info->check_integrity_print_mask); @@ -1030,13 +1046,15 @@ int btrfs_parse_options(struct btrfs_fs_ goto out; #endif case Opt_fatal_errors: - if (strcmp(args[0].from, "panic") == 0) + if (strcmp(args[0].from, "panic") == 0) { btrfs_set_opt(info->mount_opt, PANIC_ON_FATAL_ERROR); - else if (strcmp(args[0].from, "bug") == 0) + } else if (strcmp(args[0].from, "bug") == 0) { btrfs_clear_opt(info->mount_opt, PANIC_ON_FATAL_ERROR); - else { + } else { + btrfs_err(info, "unrecognized fatal_errors value %s", + args[0].from); ret = -EINVAL; goto out; } @@ -1044,8 +1062,12 @@ int btrfs_parse_options(struct btrfs_fs_ case Opt_commit_interval: intarg = 0; ret = match_int(&args[0], &intarg); - if (ret) + if (ret) { + btrfs_err(info, "unrecognized commit_interval value %s", + args[0].from); + ret = -EINVAL; goto out; + } if (intarg == 0) { btrfs_info(info, "using default commit interval %us", @@ -1059,8 +1081,11 @@ int btrfs_parse_options(struct btrfs_fs_ break; case Opt_rescue: ret = parse_rescue_options(info, args[0].from); - if (ret < 0) + if (ret < 0) { + btrfs_err(info, "unrecognized rescue value %s", + args[0].from); goto out; + } break; #ifdef CONFIG_BTRFS_DEBUG case Opt_fragment_all:

From: Tyrel Datwyler tyreld@linux.ibm.com

commit 72ea7fe0db73d65c7d977208842d8ade9b823de9 upstream.

Currently, the sub-queues and event pool resources are allocated/freed for every CRQ connection event such as reset and LPM. This exposes the driver to a couple issues. First the inefficiency of freeing and reallocating memory that can simply be resued after being sanitized. Further, a system under memory pressue runs the risk of allocation failures that could result in a crippled driver. Finally, there is a race window where command submission/compeletion can try to pull/return elements from/to an event pool that is being deleted or already has been deleted due to the lack of host state around freeing/allocating resources. The following is an example of list corruption following a live partition migration (LPM):

Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: vfat fat isofs cdrom ext4 mbcache jbd2 nft_counter nft_compat nf_tables nfnetlink rpadlpar_io rpaphp xsk_diag nfsv3 nfs_acl nfs lockd grace fscache netfs rfkill bonding tls sunrpc pseries_rng drm drm_panel_orientation_quirks xfs libcrc32c dm_service_time sd_mod t10_pi sg ibmvfc scsi_transport_fc ibmveth vmx_crypto dm_multipath dm_mirror dm_region_hash dm_log dm_mod ipmi_devintf ipmi_msghandler fuse CPU: 0 PID: 2108 Comm: ibmvfc_0 Kdump: loaded Not tainted 5.14.0-70.9.1.el9_0.ppc64le #1 NIP: c0000000007c4bb0 LR: c0000000007c4bac CTR: 00000000005b9a10 REGS: c00000025c10b760 TRAP: 0700 Not tainted (5.14.0-70.9.1.el9_0.ppc64le) MSR: 800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 2800028f XER: 0000000f CFAR: c0000000001f55bc IRQMASK: 0 GPR00: c0000000007c4bac c00000025c10ba00 c000000002a47c00 000000000000004e GPR04: c0000031e3006f88 c0000031e308bd00 c00000025c10b768 0000000000000027 GPR08: 0000000000000000 c0000031e3009dc0 00000031e0eb0000 0000000000000000 GPR12: c0000031e2ffffa8 c000000002dd0000 c000000000187108 c00000020fcee2c0 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 c008000002f81300 GPR24: 5deadbeef0000100 5deadbeef0000122 c000000263ba6910 c00000024cc88000 GPR28: 000000000000003c c0000002430a0000 c0000002430ac300 000000000000c300 NIP [c0000000007c4bb0] __list_del_entry_valid+0x90/0x100 LR [c0000000007c4bac] __list_del_entry_valid+0x8c/0x100 Call Trace: [c00000025c10ba00] [c0000000007c4bac] __list_del_entry_valid+0x8c/0x100 (unreliable) [c00000025c10ba60] [c008000002f42284] ibmvfc_free_queue+0xec/0x210 [ibmvfc] [c00000025c10bb10] [c008000002f4246c] ibmvfc_deregister_scsi_channel+0xc4/0x160 [ibmvfc] [c00000025c10bba0] [c008000002f42580] ibmvfc_release_sub_crqs+0x78/0x130 [ibmvfc] [c00000025c10bc20] [c008000002f4f6cc] ibmvfc_do_work+0x5c4/0xc70 [ibmvfc] [c00000025c10bce0] [c008000002f4fdec] ibmvfc_work+0x74/0x1e8 [ibmvfc] [c00000025c10bda0] [c0000000001872b8] kthread+0x1b8/0x1c0 [c00000025c10be10] [c00000000000cd64] ret_from_kernel_thread+0x5c/0x64 Instruction dump: 40820034 38600001 38210060 4e800020 7c0802a6 7c641b78 3c62fe7a 7d254b78 3863b590 f8010070 4ba309cd 60000000 <0fe00000> 7c0802a6 3c62fe7a 3863b640 ---[ end trace 11a2b65a92f8b66c ]--- ibmvfc 30000003: Send warning. Receive queue closed, will retry.

Add registration/deregistration helpers that are called instead during connection resets to sanitize and reconfigure the queues.

Link: https://lore.kernel.org/r/20220616191126.1281259-3-tyreld@linux.ibm.com Fixes: 3034ebe26389 ("scsi: ibmvfc: Add alloc/dealloc routines for SCSI Sub-CRQ Channels") Cc: stable@vger.kernel.org Reviewed-by: Brian King brking@linux.vnet.ibm.com Signed-off-by: Tyrel Datwyler tyreld@linux.ibm.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/scsi/ibmvscsi/ibmvfc.c | 79 ++++++++++++++++++++++++++++++++--------- 1 file changed, 62 insertions(+), 17 deletions(-)

--- a/drivers/scsi/ibmvscsi/ibmvfc.c +++ b/drivers/scsi/ibmvscsi/ibmvfc.c @@ -160,8 +160,8 @@ static void ibmvfc_npiv_logout(struct ib static void ibmvfc_tgt_implicit_logout_and_del(struct ibmvfc_target *); static void ibmvfc_tgt_move_login(struct ibmvfc_target *);

-static void ibmvfc_release_sub_crqs(struct ibmvfc_host *); -static void ibmvfc_init_sub_crqs(struct ibmvfc_host *); +static void ibmvfc_dereg_sub_crqs(struct ibmvfc_host *); +static void ibmvfc_reg_sub_crqs(struct ibmvfc_host *);

static const char *unknown_error = "unknown error";

@@ -917,7 +917,7 @@ static int ibmvfc_reenable_crq_queue(str struct vio_dev *vdev = to_vio_dev(vhost->dev); unsigned long flags;

- ibmvfc_release_sub_crqs(vhost); + ibmvfc_dereg_sub_crqs(vhost);

/* Re-enable the CRQ */ do { @@ -936,7 +936,7 @@ static int ibmvfc_reenable_crq_queue(str spin_unlock(vhost->crq.q_lock); spin_unlock_irqrestore(vhost->host->host_lock, flags);

- ibmvfc_init_sub_crqs(vhost); + ibmvfc_reg_sub_crqs(vhost);

return rc; } @@ -955,7 +955,7 @@ static int ibmvfc_reset_crq(struct ibmvf struct vio_dev *vdev = to_vio_dev(vhost->dev); struct ibmvfc_queue *crq = &vhost->crq;

- ibmvfc_release_sub_crqs(vhost); + ibmvfc_dereg_sub_crqs(vhost);

/* Close the CRQ */ do { @@ -988,7 +988,7 @@ static int ibmvfc_reset_crq(struct ibmvf spin_unlock(vhost->crq.q_lock); spin_unlock_irqrestore(vhost->host->host_lock, flags);

- ibmvfc_init_sub_crqs(vhost); + ibmvfc_reg_sub_crqs(vhost);

return rc; } @@ -5759,9 +5759,6 @@ static int ibmvfc_register_scsi_channel(

ENTER;

- if (ibmvfc_alloc_queue(vhost, scrq, IBMVFC_SUB_CRQ_FMT)) - return -ENOMEM; - rc = h_reg_sub_crq(vdev->unit_address, scrq->msg_token, PAGE_SIZE, &scrq->cookie, &scrq->hw_irq);

@@ -5801,7 +5798,6 @@ irq_failed: rc = plpar_hcall_norets(H_FREE_SUB_CRQ, vdev->unit_address, scrq->cookie); } while (rtas_busy_delay(rc)); reg_failed: - ibmvfc_free_queue(vhost, scrq); LEAVE; return rc; } @@ -5827,12 +5823,50 @@ static void ibmvfc_deregister_scsi_chann if (rc) dev_err(dev, "Failed to free sub-crq[%d]: rc=%ld\n", index, rc);

- ibmvfc_free_queue(vhost, scrq); + /* Clean out the queue */ + memset(scrq->msgs.crq, 0, PAGE_SIZE); + scrq->cur = 0; + + LEAVE; +} + +static void ibmvfc_reg_sub_crqs(struct ibmvfc_host *vhost) +{ + int i, j; + + ENTER; + if (!vhost->mq_enabled || !vhost->scsi_scrqs.scrqs) + return; + + for (i = 0; i < nr_scsi_hw_queues; i++) { + if (ibmvfc_register_scsi_channel(vhost, i)) { + for (j = i; j > 0; j--) + ibmvfc_deregister_scsi_channel(vhost, j - 1); + vhost->do_enquiry = 0; + return; + } + } + + LEAVE; +} + +static void ibmvfc_dereg_sub_crqs(struct ibmvfc_host *vhost) +{ + int i; + + ENTER; + if (!vhost->mq_enabled || !vhost->scsi_scrqs.scrqs) + return; + + for (i = 0; i < nr_scsi_hw_queues; i++) + ibmvfc_deregister_scsi_channel(vhost, i); + LEAVE; }

static void ibmvfc_init_sub_crqs(struct ibmvfc_host *vhost) { + struct ibmvfc_queue *scrq; int i, j;

ENTER; @@ -5848,30 +5882,41 @@ static void ibmvfc_init_sub_crqs(struct }

for (i = 0; i < nr_scsi_hw_queues; i++) { - if (ibmvfc_register_scsi_channel(vhost, i)) { - for (j = i; j > 0; j--) - ibmvfc_deregister_scsi_channel(vhost, j - 1); + scrq = &vhost->scsi_scrqs.scrqs[i]; + if (ibmvfc_alloc_queue(vhost, scrq, IBMVFC_SUB_CRQ_FMT)) { + for (j = i; j > 0; j--) { + scrq = &vhost->scsi_scrqs.scrqs[j - 1]; + ibmvfc_free_queue(vhost, scrq); + } kfree(vhost->scsi_scrqs.scrqs); vhost->scsi_scrqs.scrqs = NULL; vhost->scsi_scrqs.active_queues = 0; vhost->do_enquiry = 0; - break; + vhost->mq_enabled = 0; + return; } }

+ ibmvfc_reg_sub_crqs(vhost); + LEAVE; }

static void ibmvfc_release_sub_crqs(struct ibmvfc_host *vhost) { + struct ibmvfc_queue *scrq; int i;

ENTER; if (!vhost->scsi_scrqs.scrqs) return;

- for (i = 0; i < nr_scsi_hw_queues; i++) - ibmvfc_deregister_scsi_channel(vhost, i); + ibmvfc_dereg_sub_crqs(vhost); + + for (i = 0; i < nr_scsi_hw_queues; i++) { + scrq = &vhost->scsi_scrqs.scrqs[i]; + ibmvfc_free_queue(vhost, scrq); + }

kfree(vhost->scsi_scrqs.scrqs); vhost->scsi_scrqs.scrqs = NULL;

From: Mengqi Zhang mengqi.zhang@mediatek.com

commit 89bcd9a64b849380ef57e3032b307574e48db524 upstream.

MediaTek IP requires that after dma stop, it need to wait this dma stop bit auto-reset to 0. When bus is in high loading state, it will take a while for the dma stop complete. If there is no waiting operation here, when program runs to clear fifo and reset, bus will hang.

In addition, there should be no return in msdc_data_xfer_next() if there is data need be transferred, because no matter what error occurs here, it should continue to excute to the following mmc_request_done. Otherwise the core layer may wait complete forever.

Signed-off-by: Mengqi Zhang mengqi.zhang@mediatek.com Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220609112239.18911-1-mengqi.zhang@mediatek.com Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/mmc/host/mtk-sd.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-)

--- a/drivers/mmc/host/mtk-sd.c +++ b/drivers/mmc/host/mtk-sd.c @@ -1356,7 +1356,7 @@ static void msdc_data_xfer_next(struct m msdc_request_done(host, mrq); }

-static bool msdc_data_xfer_done(struct msdc_host *host, u32 events, +static void msdc_data_xfer_done(struct msdc_host *host, u32 events, struct mmc_request *mrq, struct mmc_data *data) { struct mmc_command *stop; @@ -1376,7 +1376,7 @@ static bool msdc_data_xfer_done(struct m spin_unlock_irqrestore(&host->lock, flags);

if (done) - return true; + return; stop = data->stop;

if (check_data || (stop && stop->error)) { @@ -1385,12 +1385,15 @@ static bool msdc_data_xfer_done(struct m sdr_set_field(host->base + MSDC_DMA_CTRL, MSDC_DMA_CTRL_STOP, 1);

+ ret = readl_poll_timeout_atomic(host->base + MSDC_DMA_CTRL, val, + !(val & MSDC_DMA_CTRL_STOP), 1, 20000); + if (ret) + dev_dbg(host->dev, "DMA stop timed out\n"); + ret = readl_poll_timeout_atomic(host->base + MSDC_DMA_CFG, val, !(val & MSDC_DMA_CFG_STS), 1, 20000); - if (ret) { - dev_dbg(host->dev, "DMA stop timed out\n"); - return false; - } + if (ret) + dev_dbg(host->dev, "DMA inactive timed out\n");

sdr_clr_bits(host->base + MSDC_INTEN, data_ints_mask); dev_dbg(host->dev, "DMA stop\n"); @@ -1415,9 +1418,7 @@ static bool msdc_data_xfer_done(struct m }

msdc_data_xfer_next(host, mrq); - done = true; } - return done; }

static void msdc_set_buswidth(struct msdc_host *host, u32 width) @@ -2416,6 +2417,9 @@ static void msdc_cqe_disable(struct mmc_ if (recovery) { sdr_set_field(host->base + MSDC_DMA_CTRL, MSDC_DMA_CTRL_STOP, 1); + if (WARN_ON(readl_poll_timeout(host->base + MSDC_DMA_CTRL, val, + !(val & MSDC_DMA_CTRL_STOP), 1, 3000))) + return; if (WARN_ON(readl_poll_timeout(host->base + MSDC_DMA_CFG, val, !(val & MSDC_DMA_CFG_STS), 1, 3000))) return;

From: Joerg Roedel jroedel@suse.de

commit c242507c1b895646b4a25060df13b6214805759f upstream.

The IOMMU mailing list will move from lists.linux-foundation.org to lists.linux.dev. The hard switch of the archive will happen on July 5th, but add the new list now already so that people start using the list when sending patches. After July 5th the old list will disappear.

Cc: stable@vger.kernel.org Signed-off-by: Joerg Roedel jroedel@suse.de Link: https://lore.kernel.org/r/20220624125139.412-1-joro@8bytes.org Signed-off-by: Joerg Roedel jroedel@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- MAINTAINERS | 11 +++++++++++ 1 file changed, 11 insertions(+)

--- a/MAINTAINERS +++ b/MAINTAINERS @@ -427,6 +427,7 @@ ACPI VIOT DRIVER M: Jean-Philippe Brucker jean-philippe@linaro.org L: linux-acpi@vger.kernel.org L: iommu@lists.linux-foundation.org +L: iommu@lists.linux.dev S: Maintained F: drivers/acpi/viot.c F: include/linux/acpi_viot.h @@ -960,6 +961,7 @@ AMD IOMMU (AMD-VI) M: Joerg Roedel joro@8bytes.org R: Suravee Suthikulpanit suravee.suthikulpanit@amd.com L: iommu@lists.linux-foundation.org +L: iommu@lists.linux.dev S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git F: drivers/iommu/amd/ @@ -5898,6 +5900,7 @@ M: Christoph Hellwig hch@lst.de M: Marek Szyprowski m.szyprowski@samsung.com R: Robin Murphy robin.murphy@arm.com L: iommu@lists.linux-foundation.org +L: iommu@lists.linux.dev S: Supported W: http://git.infradead.org/users/hch/dma-mapping.git T: git git://git.infradead.org/users/hch/dma-mapping.git @@ -5910,6 +5913,7 @@ F: kernel/dma/ DMA MAPPING BENCHMARK M: Xiang Chen chenxiang66@hisilicon.com L: iommu@lists.linux-foundation.org +L: iommu@lists.linux.dev F: kernel/dma/map_benchmark.c F: tools/testing/selftests/dma/

@@ -7476,6 +7480,7 @@ F: drivers/gpu/drm/exynos/exynos_dp* EXYNOS SYSMMU (IOMMU) driver M: Marek Szyprowski m.szyprowski@samsung.com L: iommu@lists.linux-foundation.org +L: iommu@lists.linux.dev S: Maintained F: drivers/iommu/exynos-iommu.c

@@ -9875,6 +9880,7 @@ INTEL IOMMU (VT-d) M: David Woodhouse dwmw2@infradead.org M: Lu Baolu baolu.lu@linux.intel.com L: iommu@lists.linux-foundation.org +L: iommu@lists.linux.dev S: Supported T: git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git F: drivers/iommu/intel/ @@ -10253,6 +10259,7 @@ IOMMU DRIVERS M: Joerg Roedel joro@8bytes.org M: Will Deacon will@kernel.org L: iommu@lists.linux-foundation.org +L: iommu@lists.linux.dev S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git F: Documentation/devicetree/bindings/iommu/ @@ -12369,6 +12376,7 @@ F: drivers/i2c/busses/i2c-mt65xx.c MEDIATEK IOMMU DRIVER M: Yong Wu yong.wu@mediatek.com L: iommu@lists.linux-foundation.org +L: iommu@lists.linux.dev L: linux-mediatek@lists.infradead.org (moderated for non-subscribers) S: Supported F: Documentation/devicetree/bindings/iommu/mediatek* @@ -16354,6 +16362,7 @@ F: drivers/i2c/busses/i2c-qcom-cci.c QUALCOMM IOMMU M: Rob Clark robdclark@gmail.com L: iommu@lists.linux-foundation.org +L: iommu@lists.linux.dev L: linux-arm-msm@vger.kernel.org S: Maintained F: drivers/iommu/arm/arm-smmu/qcom_iommu.c @@ -18939,6 +18948,7 @@ F: arch/x86/boot/video* SWIOTLB SUBSYSTEM M: Christoph Hellwig hch@infradead.org L: iommu@lists.linux-foundation.org +L: iommu@lists.linux.dev S: Supported W: http://git.infradead.org/users/hch/dma-mapping.git T: git git://git.infradead.org/users/hch/dma-mapping.git @@ -21609,6 +21619,7 @@ M: Juergen Gross jgross@suse.com M: Stefano Stabellini sstabellini@kernel.org L: xen-devel@lists.xenproject.org (moderated for non-subscribers) L: iommu@lists.linux-foundation.org +L: iommu@lists.linux.dev S: Supported F: arch/x86/xen/*swiotlb* F: drivers/xen/*swiotlb*

From: Edward Wu edwardwu@realtek.com

commit 540a92bfe6dab7310b9df2e488ba247d784d0163 upstream.

Add flags value to check the result of ata completion

Fixes: 255c03d15a29 ("libata: Add tracepoints") Cc: stable@vger.kernel.org Signed-off-by: Edward Wu edwardwu@realtek.com Signed-off-by: Damien Le Moal damien.lemoal@opensource.wdc.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- include/trace/events/libata.h | 1 + 1 file changed, 1 insertion(+)

--- a/include/trace/events/libata.h +++ b/include/trace/events/libata.h @@ -288,6 +288,7 @@ DECLARE_EVENT_CLASS(ata_qc_complete_temp __entry->hob_feature = qc->result_tf.hob_feature; __entry->nsect = qc->result_tf.nsect; __entry->hob_nsect = qc->result_tf.hob_nsect; + __entry->flags = qc->flags; ),

TP_printk("ata_port=%u ata_dev=%u tag=%d flags=%s status=%s " \

From: Mike Snitzer snitzer@kernel.org

commit 78ccef91234ba331c04d71f3ecb1377451d21056 upstream.

Commit 5291984004edf ("dm: fix bio polling to handle possibile BLK_STS_AGAIN") inadvertently introduced an early return from dm_io_complete() without first queueing the bio to DM if BLK_STS_AGAIN occurs and bio-polling is _not_ being used.

Fix this by only returning early from dm_io_complete() if the bio has first been properly queued to DM. Otherwise, the bio will never finish via bio_endio.

Fixes: 5291984004edf ("dm: fix bio polling to handle possibile BLK_STS_AGAIN") Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer snitzer@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/md/dm.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -899,9 +899,11 @@ static void dm_io_complete(struct dm_io if (io_error == BLK_STS_AGAIN) { /* io_uring doesn't handle BLK_STS_AGAIN (yet) */ queue_io(md, bio); + return; } } - return; + if (io_error == BLK_STS_DM_REQUEUE) + return; }

if (bio_is_flush_with_data(bio)) {

From: Masami Hiramatsu (Google) mhiramat@kernel.org

commit cc72b72073ac982a954d3b43519ca1c28f03c27c upstream.

There is a small chance that get_kretprobe(ri) returns NULL in kretprobe_dispatcher() when another CPU unregisters the kretprobe right after __kretprobe_trampoline_handler().

To avoid this issue, kretprobe_dispatcher() checks the get_kretprobe() return value again. And if it is NULL, it returns soon because that kretprobe is under unregistering process.

This issue has been introduced when the kretprobe is decoupled from the struct kretprobe_instance by commit d741bf41d7c7 ("kprobes: Remove kretprobe hash"). Before that commit, the struct kretprob_instance::rp directly points the kretprobe and it is never be NULL.

Link: https://lkml.kernel.org/r/165366693881.797669.16926184644089588731.stgit@dev...

Reported-by: Yonghong Song yhs@fb.com Fixes: d741bf41d7c7 ("kprobes: Remove kretprobe hash") Cc: Peter Zijlstra peterz@infradead.org Cc: Ingo Molnar mingo@kernel.org Cc: bpf bpf@vger.kernel.org Cc: Kernel Team kernel-team@fb.com Cc: stable@vger.kernel.org Signed-off-by: Masami Hiramatsu (Google) mhiramat@kernel.org Acked-by: Jiri Olsa jolsa@kernel.org Signed-off-by: Steven Rostedt (Google) rostedt@goodmis.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- kernel/trace/trace_kprobe.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)

--- a/kernel/trace/trace_kprobe.c +++ b/kernel/trace/trace_kprobe.c @@ -1718,8 +1718,17 @@ static int kretprobe_dispatcher(struct kretprobe_instance *ri, struct pt_regs *regs) { struct kretprobe *rp = get_kretprobe(ri); - struct trace_kprobe *tk = container_of(rp, struct trace_kprobe, rp); + struct trace_kprobe *tk;

+ /* + * There is a small chance that get_kretprobe(ri) returns NULL when + * the kretprobe is unregister on another CPU between kretprobe's + * trampoline_handler and this function. + */ + if (unlikely(!rp)) + return 0; + + tk = container_of(rp, struct trace_kprobe, rp); raw_cpu_inc(*tk->nhit);

if (trace_probe_test_flag(&tk->tp, TP_FLAG_TRACE))

From: Jann Horn jannh@google.com

commit eeaa345e128515135ccb864c04482180c08e3259 upstream.

The fastpath in slab_alloc_node() assumes that c->slab is stable as long as the TID stays the same. However, two places in __slab_alloc() currently don't update the TID when deactivating the CPU slab.

If multiple operations race the right way, this could lead to an object getting lost; or, in an even more unlikely situation, it could even lead to an object being freed onto the wrong slab's freelist, messing up the `inuse` counter and eventually causing a page to be freed to the page allocator while it still contains slab objects.

(I haven't actually tested these cases though, this is just based on looking at the code. Writing testcases for this stuff seems like it'd be a pain...)

The race leading to state inconsistency is (all operations on the same CPU and kmem_cache):

- task A: begin do_slab_free(): - read TID - read pcpu freelist (==NULL) - check `slab == c->slab` (true) - [PREEMPT A->B] - task B: begin slab_alloc_node(): - fastpath fails (`c->freelist` is NULL) - enter __slab_alloc() - slub_get_cpu_ptr() (disables preemption) - enter ___slab_alloc() - take local_lock_irqsave() - read c->freelist as NULL - get_freelist() returns NULL - write `c->slab = NULL` - drop local_unlock_irqrestore() - goto new_slab - slub_percpu_partial() is NULL - get_partial() returns NULL - slub_put_cpu_ptr() (enables preemption) - [PREEMPT B->A] - task A: finish do_slab_free(): - this_cpu_cmpxchg_double() succeeds() - [CORRUPT STATE: c->slab==NULL, c->freelist!=NULL]

From there, the object on c->freelist will get lost if task B is allowed to

continue from here: It will proceed to the retry_load_slab label, set c->slab, then jump to load_freelist, which clobbers c->freelist.

But if we instead continue as follows, we get worse corruption:

- task A: run __slab_free() on object from other struct slab: - CPU_PARTIAL_FREE case (slab was on no list, is now on pcpu partial) - task A: run slab_alloc_node() with NUMA node constraint: - fastpath fails (c->slab is NULL) - call __slab_alloc() - slub_get_cpu_ptr() (disables preemption) - enter ___slab_alloc() - c->slab is NULL: goto new_slab - slub_percpu_partial() is non-NULL - set c->slab to slub_percpu_partial(c) - [CORRUPT STATE: c->slab points to slab-1, c->freelist has objects from slab-2] - goto redo - node_match() fails - goto deactivate_slab - existing c->freelist is passed into deactivate_slab() - inuse count of slab-1 is decremented to account for object from slab-2

At this point, the inuse count of slab-1 is 1 lower than it should be. This means that if we free all allocated objects in slab-1 except for one, SLUB will think that slab-1 is completely unused, and may free its page, leading to use-after-free.

Fixes: c17dda40a6a4e ("slub: Separate out kmem_cache_cpu processing from deactivate_slab") Fixes: 03e404af26dc2 ("slub: fast release on full slab") Cc: stable@vger.kernel.org Signed-off-by: Jann Horn jannh@google.com Acked-by: Christoph Lameter cl@linux.com Acked-by: David Rientjes rientjes@google.com Reviewed-by: Muchun Song songmuchun@bytedance.com Tested-by: Hyeonggon Yoo 42.hyeyoo@gmail.com Signed-off-by: Vlastimil Babka vbabka@suse.cz Link: https://lore.kernel.org/r/20220608182205.2945720-1-jannh@google.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- mm/slub.c | 2 ++ 1 file changed, 2 insertions(+)

--- a/mm/slub.c +++ b/mm/slub.c @@ -2939,6 +2939,7 @@ redo:

if (!freelist) { c->slab = NULL; + c->tid = next_tid(c->tid); local_unlock_irqrestore(&s->cpu_slab->lock, flags); stat(s, DEACTIVATE_BYPASS); goto new_slab; @@ -2971,6 +2972,7 @@ deactivate_slab: freelist = c->freelist; c->slab = NULL; c->freelist = NULL; + c->tid = next_tid(c->tid); local_unlock_irqrestore(&s->cpu_slab->lock, flags); deactivate_slab(s, slab, freelist);

From: Joshua Ashton joshua@froggi.es

commit e84131a88a8cdcd6fe9f234ed98e3f8ca049142b upstream.

For DCN20 and above, the code that actually hooks up the provided input_color_space got lost at some point.

Fixes COLOR_ENCODING and COLOR_RANGE doing nothing on DCN20+. Tested using Steam Remote Play Together + gamescope.

Update other DCNs the same wasy DCN1.x was updates in commit a1e07ba89d49 ("drm/amd/display: Use plane->color_space for dpp if specified")

Fixes: a1e07ba89d49 ("drm/amd/display: Use plane->color_space for dpp if specified") Signed-off-by: Joshua Ashton joshua@froggi.es Signed-off-by: Alex Deucher alexander.deucher@amd.com Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/gpu/drm/amd/display/dc/dcn20/dcn20_dpp.c | 3 +++ drivers/gpu/drm/amd/display/dc/dcn201/dcn201_dpp.c | 3 +++ drivers/gpu/drm/amd/display/dc/dcn30/dcn30_dpp.c | 3 +++ 3 files changed, 9 insertions(+)

--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_dpp.c +++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_dpp.c @@ -212,6 +212,9 @@ static void dpp2_cnv_setup ( break; }

+ /* Set default color space based on format if none is given. */ + color_space = input_color_space ? input_color_space : color_space; + if (is_2bit == 1 && alpha_2bit_lut != NULL) { REG_UPDATE(ALPHA_2BIT_LUT, ALPHA_2BIT_LUT0, alpha_2bit_lut->lut0); REG_UPDATE(ALPHA_2BIT_LUT, ALPHA_2BIT_LUT1, alpha_2bit_lut->lut1); --- a/drivers/gpu/drm/amd/display/dc/dcn201/dcn201_dpp.c +++ b/drivers/gpu/drm/amd/display/dc/dcn201/dcn201_dpp.c @@ -153,6 +153,9 @@ static void dpp201_cnv_setup( break; }

+ /* Set default color space based on format if none is given. */ + color_space = input_color_space ? input_color_space : color_space; + if (is_2bit == 1 && alpha_2bit_lut != NULL) { REG_UPDATE(ALPHA_2BIT_LUT, ALPHA_2BIT_LUT0, alpha_2bit_lut->lut0); REG_UPDATE(ALPHA_2BIT_LUT, ALPHA_2BIT_LUT1, alpha_2bit_lut->lut1); --- a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_dpp.c +++ b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_dpp.c @@ -294,6 +294,9 @@ static void dpp3_cnv_setup ( break; }

+ /* Set default color space based on format if none is given. */ + color_space = input_color_space ? input_color_space : color_space; + if (is_2bit == 1 && alpha_2bit_lut != NULL) { REG_UPDATE(ALPHA_2BIT_LUT, ALPHA_2BIT_LUT0, alpha_2bit_lut->lut0); REG_UPDATE(ALPHA_2BIT_LUT, ALPHA_2BIT_LUT1, alpha_2bit_lut->lut1);

From: Johan Hovold johan@kernel.org

commit ae60aac59a9ad8ab64a4b07de509a534a75b6bac upstream.

Add support for further HXN (G) type devices (GT variant, GL variant, GS variant and GR) and document the bcdDevice mapping.

Note that the TA and TB types use the same bcdDevice as some GT and GE variants, respectively, but that the HX status request can be used to determine which is which.

Also note that we currently do not distinguish between the various HXN (G) types in the driver but that this may change eventually (e.g. when adding GPIO support).

Reported-by: Charles Yeh charlesyeh522@gmail.com Link: https://lore.kernel.org/r/YrF77b9DdeumUAee@hovoldconsulting.com Cc: stable@vger.kernel.org # 5.13 Reviewed-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Johan Hovold johan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/serial/pl2303.c | 29 +++++++++++++++++------------ 1 file changed, 17 insertions(+), 12 deletions(-)

--- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -436,22 +436,27 @@ static int pl2303_detect_type(struct usb break; case 0x200: switch (bcdDevice) { - case 0x100: + case 0x100: /* GC */ case 0x105: + return TYPE_HXN; + case 0x300: /* GT / TA */ + if (pl2303_supports_hx_status(serial)) + return TYPE_TA; + fallthrough; case 0x305: + case 0x400: /* GL */ case 0x405: + return TYPE_HXN; + case 0x500: /* GE / TB */ + if (pl2303_supports_hx_status(serial)) + return TYPE_TB; + fallthrough; + case 0x505: + case 0x600: /* GS */ case 0x605: - /* - * Assume it's an HXN-type if the device doesn't - * support the old read request value. - */ - if (!pl2303_supports_hx_status(serial)) - return TYPE_HXN; - break; - case 0x300: - return TYPE_TA; - case 0x500: - return TYPE_TB; + case 0x700: /* GR */ + case 0x705: + return TYPE_HXN; } break; }

From: Yonglin Tan yonglin.tan@outlook.com

commit 33b29dbb39bcbd0a96e440646396bbf670b914fa upstream.

The EM05-G modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively:

"RMNET" : AT + DIAG + NMEA + Modem + QMI "MBIM" : MBIM + AT + DIAG + NMEA + Modem

The detailed description of the USB configuration for each mode as follows:

RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=030a Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=030a Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Yonglin Tan yonglin.tan@outlook.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold johan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/serial/option.c | 3 +++ 1 file changed, 3 insertions(+)

--- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -252,6 +252,7 @@ static void option_instat_callback(struc #define QUECTEL_PRODUCT_EG95 0x0195 #define QUECTEL_PRODUCT_BG96 0x0296 #define QUECTEL_PRODUCT_EP06 0x0306 +#define QUECTEL_PRODUCT_EM05G 0x030a #define QUECTEL_PRODUCT_EM12 0x0512 #define QUECTEL_PRODUCT_RM500Q 0x0800 #define QUECTEL_PRODUCT_EC200S_CN 0x6002 @@ -1134,6 +1135,8 @@ static const struct usb_device_id option { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0xff, 0xff), .driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0, 0) }, + { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G, 0xff), + .driver_info = RSVD(6) | ZLP }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0xff, 0xff), .driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0, 0) },

From: Rob Clark robdclark@chromium.org

[ Upstream commit 036d20726c30267724416e966c9f92db07de8081 ]

If a GEM object is allocated, and then exported as a dma-buf fd which is mmap'd before or without the GEM buffer being directly mmap'd, the vma_node could be unitialized. This leads to a situation where the CPU mapping is not correctly torn down in drm_vma_node_unmap().

Fixes: e5516553999f ("drm: call drm_gem_object_funcs.mmap with fake offset") Signed-off-by: Rob Clark robdclark@chromium.org Reviewed-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org Link: https://lore.kernel.org/r/20220531200857.136547-1-robdclark@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/msm/msm_drv.c | 2 +- drivers/gpu/drm/msm/msm_drv.h | 1 + drivers/gpu/drm/msm/msm_gem_prime.c | 15 +++++++++++++++ 3 files changed, 17 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c index f2c46116df55..b5f6acfe7c6e 100644 --- a/drivers/gpu/drm/msm/msm_drv.c +++ b/drivers/gpu/drm/msm/msm_drv.c @@ -967,7 +967,7 @@ static const struct drm_driver msm_driver = { .prime_handle_to_fd = drm_gem_prime_handle_to_fd, .prime_fd_to_handle = drm_gem_prime_fd_to_handle, .gem_prime_import_sg_table = msm_gem_prime_import_sg_table, - .gem_prime_mmap = drm_gem_prime_mmap, + .gem_prime_mmap = msm_gem_prime_mmap, #ifdef CONFIG_DEBUG_FS .debugfs_init = msm_debugfs_init, #endif diff --git a/drivers/gpu/drm/msm/msm_drv.h b/drivers/gpu/drm/msm/msm_drv.h index d661debb50f1..9b985b641319 100644 --- a/drivers/gpu/drm/msm/msm_drv.h +++ b/drivers/gpu/drm/msm/msm_drv.h @@ -288,6 +288,7 @@ unsigned long msm_gem_shrinker_shrink(struct drm_device *dev, unsigned long nr_t void msm_gem_shrinker_init(struct drm_device *dev); void msm_gem_shrinker_cleanup(struct drm_device *dev);

+int msm_gem_prime_mmap(struct drm_gem_object *obj, struct vm_area_struct *vma); struct sg_table *msm_gem_prime_get_sg_table(struct drm_gem_object *obj); int msm_gem_prime_vmap(struct drm_gem_object *obj, struct iosys_map *map); void msm_gem_prime_vunmap(struct drm_gem_object *obj, struct iosys_map *map); diff --git a/drivers/gpu/drm/msm/msm_gem_prime.c b/drivers/gpu/drm/msm/msm_gem_prime.c index 94ab705e9b8a..dcc8a573bc76 100644 --- a/drivers/gpu/drm/msm/msm_gem_prime.c +++ b/drivers/gpu/drm/msm/msm_gem_prime.c @@ -11,6 +11,21 @@ #include "msm_drv.h" #include "msm_gem.h"

+int msm_gem_prime_mmap(struct drm_gem_object *obj, struct vm_area_struct *vma) +{ + int ret; + + /* Ensure the mmap offset is initialized. We lazily initialize it, + * so if it has not been first mmap'd directly as a GEM object, the + * mmap offset will not be already initialized. + */ + ret = drm_gem_create_mmap_offset(obj); + if (ret) + return ret; + + return drm_gem_prime_mmap(obj, vma); +} + struct sg_table *msm_gem_prime_get_sg_table(struct drm_gem_object *obj) { struct msm_gem_object *msm_obj = to_msm_bo(obj);

From: Florian Westphal fw@strlen.de

[ Upstream commit b1fd94e704571f98b21027340eecf821b2bdffba ]

bh might occur while updating per-cpu rnd_state from user context, ie. local_out path.

BUG: using smp_processor_id() in preemptible [00000000] code: nginx/2725 caller is nft_ng_random_eval+0x24/0x54 [nft_numgen] Call Trace: check_preemption_disabled+0xde/0xe0 nft_ng_random_eval+0x24/0x54 [nft_numgen]

Use the random driver instead, this also avoids need for local prandom state. Moreover, prandom now uses the random driver since d4150779e60f ("random32: use real rng for non-deterministic randomness").

Based on earlier patch from Pablo Neira.

Fixes: 6b2faee0ca91 ("netfilter: nft_meta: place prandom handling in a helper") Fixes: 978d8f9055c3 ("netfilter: nft_numgen: add map lookups for numgen random operations") Signed-off-by: Florian Westphal fw@strlen.de Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/nft_meta.c | 13 ++----------- net/netfilter/nft_numgen.c | 12 +++--------- 2 files changed, 5 insertions(+), 20 deletions(-)

diff --git a/net/netfilter/nft_meta.c b/net/netfilter/nft_meta.c index ac4859241e17..55d2d49c3425 100644 --- a/net/netfilter/nft_meta.c +++ b/net/netfilter/nft_meta.c @@ -14,6 +14,7 @@ #include <linux/in.h> #include <linux/ip.h> #include <linux/ipv6.h> +#include <linux/random.h> #include <linux/smp.h> #include <linux/static_key.h> #include <net/dst.h> @@ -32,8 +33,6 @@ #define NFT_META_SECS_PER_DAY 86400 #define NFT_META_DAYS_PER_WEEK 7

-static DEFINE_PER_CPU(struct rnd_state, nft_prandom_state); - static u8 nft_meta_weekday(void) { time64_t secs = ktime_get_real_seconds(); @@ -271,13 +270,6 @@ static bool nft_meta_get_eval_ifname(enum nft_meta_keys key, u32 *dest, return true; }

-static noinline u32 nft_prandom_u32(void) -{ - struct rnd_state *state = this_cpu_ptr(&nft_prandom_state); - - return prandom_u32_state(state); -} - #ifdef CONFIG_IP_ROUTE_CLASSID static noinline bool nft_meta_get_eval_rtclassid(const struct sk_buff *skb, u32 *dest) @@ -389,7 +381,7 @@ void nft_meta_get_eval(const struct nft_expr *expr, break; #endif case NFT_META_PRANDOM: - *dest = nft_prandom_u32(); + *dest = get_random_u32(); break; #ifdef CONFIG_XFRM case NFT_META_SECPATH: @@ -518,7 +510,6 @@ int nft_meta_get_init(const struct nft_ctx *ctx, len = IFNAMSIZ; break; case NFT_META_PRANDOM: - prandom_init_once(&nft_prandom_state); len = sizeof(u32); break; #ifdef CONFIG_XFRM diff --git a/net/netfilter/nft_numgen.c b/net/netfilter/nft_numgen.c index 81b40c663d86..45d3dc9e96f2 100644 --- a/net/netfilter/nft_numgen.c +++ b/net/netfilter/nft_numgen.c @@ -9,12 +9,11 @@ #include <linux/netlink.h> #include <linux/netfilter.h> #include <linux/netfilter/nf_tables.h> +#include <linux/random.h> #include <linux/static_key.h> #include <net/netfilter/nf_tables.h> #include <net/netfilter/nf_tables_core.h>

-static DEFINE_PER_CPU(struct rnd_state, nft_numgen_prandom_state); - struct nft_ng_inc { u8 dreg; u32 modulus; @@ -135,12 +134,9 @@ struct nft_ng_random { u32 offset; };

-static u32 nft_ng_random_gen(struct nft_ng_random *priv) +static u32 nft_ng_random_gen(const struct nft_ng_random *priv) { - struct rnd_state *state = this_cpu_ptr(&nft_numgen_prandom_state); - - return reciprocal_scale(prandom_u32_state(state), priv->modulus) + - priv->offset; + return reciprocal_scale(get_random_u32(), priv->modulus) + priv->offset; }

static void nft_ng_random_eval(const struct nft_expr *expr, @@ -168,8 +164,6 @@ static int nft_ng_random_init(const struct nft_ctx *ctx, if (priv->offset + priv->modulus - 1 < priv->offset) return -EOVERFLOW;

- prandom_init_once(&nft_numgen_prandom_state); - return nft_parse_register_store(ctx, tb[NFTA_NG_DREG], &priv->dreg, NULL, NFT_DATA_VALUE, sizeof(u32)); }

From: Rob Clark robdclark@chromium.org

[ Upstream commit 49e477610087a02c3604061b8f3ee3a25a493987 ]

In msm_devfreq_suspend() we cancel idle_work synchronously so that it doesn't run after we power of the hw or in the resume path. But this means that we want to ensure that idle_work is not scheduled *after* we no longer hold a runpm ref. So switch the ordering of pm_runtime_put() vs msm_devfreq_idle().

v2. Only move the runpm _put_autosuspend, and not the _mark_last_busy()

Fixes: 9bc95570175a ("drm/msm: Devfreq tuning") Signed-off-by: Rob Clark robdclark@chromium.org Link: https://lore.kernel.org/r/20210927152928.831245-1-robdclark@gmail.com Reviewed-by: Akhil P Oommen quic_akhilpo@quicinc.com Reviewed-by: Douglas Anderson dianders@chromium.org Link: https://lore.kernel.org/r/20220608161334.2140611-1-robdclark@gmail.com Signed-off-by: Rob Clark robdclark@chromium.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/msm/msm_gpu.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/msm_gpu.c b/drivers/gpu/drm/msm/msm_gpu.c index 58eb3e1662cb..7d27d7cee688 100644 --- a/drivers/gpu/drm/msm/msm_gpu.c +++ b/drivers/gpu/drm/msm/msm_gpu.c @@ -664,7 +664,6 @@ static void retire_submit(struct msm_gpu *gpu, struct msm_ringbuffer *ring, msm_submit_retire(submit);

pm_runtime_mark_last_busy(&gpu->pdev->dev); - pm_runtime_put_autosuspend(&gpu->pdev->dev);

spin_lock_irqsave(&ring->submit_lock, flags); list_del(&submit->node); @@ -678,6 +677,8 @@ static void retire_submit(struct msm_gpu *gpu, struct msm_ringbuffer *ring, msm_devfreq_idle(gpu); mutex_unlock(&gpu->active_lock);

+ pm_runtime_put_autosuspend(&gpu->pdev->dev); + msm_gem_submit_put(submit); }

From: Ciara Loftus ciara.loftus@intel.com

[ Upstream commit a6e944f25cdbe6b82275402b8bc9a55ad7aac10b ]

Two points of potential failure in the generic transmit function are:

1. completion queue (cq) reservation failure. 2. skb allocation failure

Originally the cq reservation was performed first, followed by the skb allocation. Commit 675716400da6 ("xdp: fix possible cq entry leak") reversed the order because at the time there was no mechanism available to undo the cq reservation which could have led to possible cq entry leaks in the event of skb allocation failure. However if the skb allocation is performed first and the cq reservation then fails, the xsk skb destructor is called which blindly adds the skb address to the already full cq leading to undefined behavior.

This commit restores the original order (cq reservation followed by skb allocation) and uses the xskq_prod_cancel helper to undo the cq reserve in event of skb allocation failure.

Fixes: 675716400da6 ("xdp: fix possible cq entry leak") Signed-off-by: Ciara Loftus ciara.loftus@intel.com Signed-off-by: Daniel Borkmann daniel@iogearbox.net Acked-by: Magnus Karlsson magnus.karlsson@intel.com Link: https://lore.kernel.org/bpf/20220614070746.8871-1-ciara.loftus@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/xdp/xsk.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/net/xdp/xsk.c b/net/xdp/xsk.c index d6bcdbfd0fc5..9b12ea3ab85a 100644 --- a/net/xdp/xsk.c +++ b/net/xdp/xsk.c @@ -538,12 +538,6 @@ static int xsk_generic_xmit(struct sock *sk) goto out; }

- skb = xsk_build_skb(xs, &desc); - if (IS_ERR(skb)) { - err = PTR_ERR(skb); - goto out; - } - /* This is the backpressure mechanism for the Tx path. * Reserve space in the completion queue and only proceed * if there is space in it. This avoids having to implement @@ -552,11 +546,19 @@ static int xsk_generic_xmit(struct sock *sk) spin_lock_irqsave(&xs->pool->cq_lock, flags); if (xskq_prod_reserve(xs->pool->cq)) { spin_unlock_irqrestore(&xs->pool->cq_lock, flags); - kfree_skb(skb); goto out; } spin_unlock_irqrestore(&xs->pool->cq_lock, flags);

+ skb = xsk_build_skb(xs, &desc); + if (IS_ERR(skb)) { + err = PTR_ERR(skb); + spin_lock_irqsave(&xs->pool->cq_lock, flags); + xskq_prod_cancel(xs->pool->cq); + spin_unlock_irqrestore(&xs->pool->cq_lock, flags); + goto out; + } + err = __dev_direct_xmit(skb, xs->queue_id); if (err == NETDEV_TX_BUSY) { /* Tell user-space to retry the send */

From: Jon Maxwell jmaxwell37@gmail.com

[ Upstream commit 3046a827316c0e55fc563b4fb78c93b9ca5c7c37 ]

A customer reported a request_socket leak in a Calico cloud environment. We found that a BPF program was doing a socket lookup with takes a refcnt on the socket and that it was finding the request_socket but returning the parent LISTEN socket via sk_to_full_sk() without decrementing the child request socket 1st, resulting in request_sock slab object leak. This patch retains the existing behaviour of returning full socks to the caller but it also decrements the child request_socket if one is present before doing so to prevent the leak.

Thanks to Curtis Taylor for all the help in diagnosing and testing this. And thanks to Antoine Tenart for the reproducer and patch input.

v2 of this patch contains, refactor as per Daniel Borkmann's suggestions to validate RCU flags on the listen socket so that it balances with bpf_sk_release() and update comments as per Martin KaFai Lau's suggestion. One small change to Daniels suggestion, put "sk = sk2" under "if (sk2 != sk)" to avoid an extra instruction.

Fixes: f7355a6c0497 ("bpf: Check sk_fullsock() before returning from bpf_sk_lookup()") Fixes: edbf8c01de5a ("bpf: add skc_lookup_tcp helper") Co-developed-by: Antoine Tenart atenart@kernel.org Signed-off-by: Antoine Tenart atenart@kernel.org Signed-off-by: Jon Maxwell jmaxwell37@gmail.com Signed-off-by: Daniel Borkmann daniel@iogearbox.net Tested-by: Curtis Taylor cutaylor-pub@yahoo.com Cc: Martin KaFai Lau kafai@fb.com Link: https://lore.kernel.org/bpf/56d6f898-bde0-bb25-3427-12a330b29fb8@iogearbox.n... Link: https://lore.kernel.org/bpf/20220615011540.813025-1-jmaxwell37@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/core/filter.c | 34 ++++++++++++++++++++++++++++------ 1 file changed, 28 insertions(+), 6 deletions(-)

diff --git a/net/core/filter.c b/net/core/filter.c index 8847316ee20e..af1e77f2f24a 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -6506,10 +6506,21 @@ __bpf_sk_lookup(struct sk_buff *skb, struct bpf_sock_tuple *tuple, u32 len, ifindex, proto, netns_id, flags);

if (sk) { - sk = sk_to_full_sk(sk); - if (!sk_fullsock(sk)) { + struct sock *sk2 = sk_to_full_sk(sk); + + /* sk_to_full_sk() may return (sk)->rsk_listener, so make sure the original sk + * sock refcnt is decremented to prevent a request_sock leak. + */ + if (!sk_fullsock(sk2)) + sk2 = NULL; + if (sk2 != sk) { sock_gen_put(sk); - return NULL; + /* Ensure there is no need to bump sk2 refcnt */ + if (unlikely(sk2 && !sock_flag(sk2, SOCK_RCU_FREE))) { + WARN_ONCE(1, "Found non-RCU, unreferenced socket!"); + return NULL; + } + sk = sk2; } }

@@ -6543,10 +6554,21 @@ bpf_sk_lookup(struct sk_buff *skb, struct bpf_sock_tuple *tuple, u32 len, flags);

if (sk) { - sk = sk_to_full_sk(sk); - if (!sk_fullsock(sk)) { + struct sock *sk2 = sk_to_full_sk(sk); + + /* sk_to_full_sk() may return (sk)->rsk_listener, so make sure the original sk + * sock refcnt is decremented to prevent a request_sock leak. + */ + if (!sk_fullsock(sk2)) + sk2 = NULL; + if (sk2 != sk) { sock_gen_put(sk); - return NULL; + /* Ensure there is no need to bump sk2 refcnt */ + if (unlikely(sk2 && !sock_flag(sk2, SOCK_RCU_FREE))) { + WARN_ONCE(1, "Found non-RCU, unreferenced socket!"); + return NULL; + } + sk = sk2; } }

From: Jakub Sitnicki jakub@cloudflare.com

[ Upstream commit ff672c67ee7635ca1e28fb13729e8ef0d1f08ce5 ]

On x86-64 the tail call count is passed from one BPF function to another through %rax. Additionally, on function entry, the tail call count value is stored on stack right after the BPF program stack, due to register shortage.

The stored count is later loaded from stack either when performing a tail call - to check if we have not reached the tail call limit - or before calling another BPF function call in order to pass it via %rax.

In the latter case, we miscalculate the offset at which the tail call count was stored on function entry. The JIT does not take into account that the allocated BPF program stack is always a multiple of 8 on x86, while the actual stack depth does not have to be.

This leads to a load from an offset that belongs to the BPF stack, as shown in the example below:

SEC("tc") int entry(struct __sk_buff *skb) { /* Have data on stack which size is not a multiple of 8 */ volatile char arr[1] = {}; return subprog_tail(skb); }

int entry(struct __sk_buff * skb): 0: (b4) w2 = 0 1: (73) *(u8 *)(r10 -1) = r2 2: (85) call pc+1#bpf_prog_ce2f79bb5f3e06dd_F 3: (95) exit

int entry(struct __sk_buff * skb): 0xffffffffa0201788: nop DWORD PTR [rax+rax*1+0x0] 0xffffffffa020178d: xor eax,eax 0xffffffffa020178f: push rbp 0xffffffffa0201790: mov rbp,rsp 0xffffffffa0201793: sub rsp,0x8 0xffffffffa020179a: push rax 0xffffffffa020179b: xor esi,esi 0xffffffffa020179d: mov BYTE PTR [rbp-0x1],sil 0xffffffffa02017a1: mov rax,QWORD PTR [rbp-0x9] !!! tail call count 0xffffffffa02017a8: call 0xffffffffa02017d8 !!! is at rbp-0x10 0xffffffffa02017ad: leave 0xffffffffa02017ae: ret

Fix it by rounding up the BPF stack depth to a multiple of 8, when calculating the tail call count offset on stack.

Fixes: ebf7d1f508a7 ("bpf, x64: rework pro/epilogue and tailcall handling in JIT") Signed-off-by: Jakub Sitnicki jakub@cloudflare.com Signed-off-by: Daniel Borkmann daniel@iogearbox.net Acked-by: Maciej Fijalkowski maciej.fijalkowski@intel.com Acked-by: Daniel Borkmann daniel@iogearbox.net Link: https://lore.kernel.org/bpf/20220616162037.535469-2-jakub@cloudflare.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/net/bpf_jit_comp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c index 16b6efacf7c6..4c71fa04e784 100644 --- a/arch/x86/net/bpf_jit_comp.c +++ b/arch/x86/net/bpf_jit_comp.c @@ -1415,8 +1415,9 @@ st: if (is_imm8(insn->off)) case BPF_JMP | BPF_CALL: func = (u8 *) __bpf_call_base + imm32; if (tail_call_reachable) { + /* mov rax, qword ptr [rbp - rounded_stack_depth - 8] */ EMIT3_off32(0x48, 0x8B, 0x85, - -(bpf_prog->aux->stack_depth + 8)); + -round_up(bpf_prog->aux->stack_depth, 8) - 8); if (!imm32 || emit_call(&prog, func, image + addrs[i - 1] + 7)) return -EINVAL; } else {

From: Saurabh Sengar ssengar@linux.microsoft.com

[ Upstream commit 1d3e0980782fbafaf93285779fd3905e4f866802 ]

Current code is based on the idea that the max number of SGL entries also determines the max size of an I/O request. While this idea was true in older versions of the storvsc driver when SGL entry length was limited to 4 Kbytes, commit 3d9c3dcc58e9 ("scsi: storvsc: Enable scatterlist entry lengths > 4Kbytes") removed that limitation. It's now theoretically possible for the block layer to send requests that exceed the maximum size supported by Hyper-V. This problem doesn't currently happen in practice because the block layer defaults to a 512 Kbyte maximum, while Hyper-V in Azure supports 2 Mbyte I/O sizes. But some future configuration of Hyper-V could have a smaller max I/O size, and the block layer could exceed that max.

Fix this by correctly setting max_sectors as well as sg_tablesize to reflect the maximum I/O size that Hyper-V reports. While allowing I/O sizes larger than the block layer default of 512 Kbytes doesn’t provide any noticeable performance benefit in the tests we ran, it's still appropriate to report the correct underlying Hyper-V capabilities to the Linux block layer.

Also tweak the virt_boundary_mask to reflect that the required alignment derives from Hyper-V communication using a 4 Kbyte page size, and not on the guest page size, which might be bigger (eg. ARM64).

Link: https://lore.kernel.org/r/1655190355-28722-1-git-send-email-ssengar@linux.mi... Fixes: 3d9c3dcc58e9 ("scsi: storvsc: Enable scatter list entry lengths > 4Kbytes") Reviewed-by: Michael Kelley mikelley@microsoft.com Signed-off-by: Saurabh Sengar ssengar@linux.microsoft.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/storvsc_drv.c | 27 ++++++++++++++++++++++----- 1 file changed, 22 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c index 9a0bba5a51a7..4b1f1d73eee8 100644 --- a/drivers/scsi/storvsc_drv.c +++ b/drivers/scsi/storvsc_drv.c @@ -1916,7 +1916,7 @@ static struct scsi_host_template scsi_driver = { .cmd_per_lun = 2048, .this_id = -1, /* Ensure there are no gaps in presented sgls */ - .virt_boundary_mask = PAGE_SIZE-1, + .virt_boundary_mask = HV_HYP_PAGE_SIZE - 1, .no_write_same = 1, .track_queue_depth = 1, .change_queue_depth = storvsc_change_queue_depth, @@ -1970,6 +1970,7 @@ static int storvsc_probe(struct hv_device *device, int max_targets; int max_channels; int max_sub_channels = 0; + u32 max_xfer_bytes;

/* * Based on the windows host we are running on, @@ -2059,12 +2060,28 @@ static int storvsc_probe(struct hv_device *device, } /* max cmd length */ host->max_cmd_len = STORVSC_MAX_CMD_LEN; - /* - * set the table size based on the info we got - * from the host. + * Any reasonable Hyper-V configuration should provide + * max_transfer_bytes value aligning to HV_HYP_PAGE_SIZE, + * protecting it from any weird value. + */ + max_xfer_bytes = round_down(stor_device->max_transfer_bytes, HV_HYP_PAGE_SIZE); + /* max_hw_sectors_kb */ + host->max_sectors = max_xfer_bytes >> 9; + /* + * There are 2 requirements for Hyper-V storvsc sgl segments, + * based on which the below calculation for max segments is + * done: + * + * 1. Except for the first and last sgl segment, all sgl segments + * should be align to HV_HYP_PAGE_SIZE, that also means the + * maximum number of segments in a sgl can be calculated by + * dividing the total max transfer length by HV_HYP_PAGE_SIZE. + * + * 2. Except for the first and last, each entry in the SGL must + * have an offset that is a multiple of HV_HYP_PAGE_SIZE. */ - host->sg_tablesize = (stor_device->max_transfer_bytes >> PAGE_SHIFT); + host->sg_tablesize = (max_xfer_bytes >> HV_HYP_PAGE_SHIFT) + 1; /* * For non-IDE disks, the host supports multiple channels. * Set the number of HW queues we are supporting.

From: Quentin Perret qperret@google.com

[ Upstream commit 56961c6331463cce2d84d0f973177a517fb33a82 ]

Commit a7259df76702 ("memblock: make memblock_find_in_range method private") changed the API using which memory is reserved for the pKVM hypervisor. However, memblock_phys_alloc() differs from the original API in terms of kmemleak semantics -- the old one didn't report the reserved regions to kmemleak while the new one does. Unfortunately, when protected KVM is enabled, all kernel accesses to pKVM-private memory result in a fatal exception, which can now happen because of kmemleak scans:

$ echo scan > /sys/kernel/debug/kmemleak [ 34.991354] kvm [304]: nVHE hyp BUG at: [<ffff800008fa3750>] __kvm_nvhe_handle_host_mem_abort+0x270/0x290! [ 34.991580] kvm [304]: Hyp Offset: 0xfffe8be807e00000 [ 34.991813] Kernel panic - not syncing: HYP panic: [ 34.991813] PS:600003c9 PC:0000f418011a3750 ESR:00000000f2000800 [ 34.991813] FAR:ffff000439200000 HPFAR:0000000004792000 PAR:0000000000000000 [ 34.991813] VCPU:0000000000000000 [ 34.993660] CPU: 0 PID: 304 Comm: bash Not tainted 5.19.0-rc2 #102 [ 34.994059] Hardware name: linux,dummy-virt (DT) [ 34.994452] Call trace: [ 34.994641] dump_backtrace.part.0+0xcc/0xe0 [ 34.994932] show_stack+0x18/0x6c [ 34.995094] dump_stack_lvl+0x68/0x84 [ 34.995276] dump_stack+0x18/0x34 [ 34.995484] panic+0x16c/0x354 [ 34.995673] __hyp_pgtable_total_pages+0x0/0x60 [ 34.995933] scan_block+0x74/0x12c [ 34.996129] scan_gray_list+0xd8/0x19c [ 34.996332] kmemleak_scan+0x2c8/0x580 [ 34.996535] kmemleak_write+0x340/0x4a0 [ 34.996744] full_proxy_write+0x60/0xbc [ 34.996967] vfs_write+0xc4/0x2b0 [ 34.997136] ksys_write+0x68/0xf4 [ 34.997311] __arm64_sys_write+0x20/0x2c [ 34.997532] invoke_syscall+0x48/0x114 [ 34.997779] el0_svc_common.constprop.0+0x44/0xec [ 34.998029] do_el0_svc+0x2c/0xc0 [ 34.998205] el0_svc+0x2c/0x84 [ 34.998421] el0t_64_sync_handler+0xf4/0x100 [ 34.998653] el0t_64_sync+0x18c/0x190 [ 34.999252] SMP: stopping secondary CPUs [ 35.000034] Kernel Offset: disabled [ 35.000261] CPU features: 0x800,00007831,00001086 [ 35.000642] Memory Limit: none [ 35.001329] ---[ end Kernel panic - not syncing: HYP panic: [ 35.001329] PS:600003c9 PC:0000f418011a3750 ESR:00000000f2000800 [ 35.001329] FAR:ffff000439200000 HPFAR:0000000004792000 PAR:0000000000000000 [ 35.001329] VCPU:0000000000000000 ]---

Fix this by explicitly excluding the hypervisor's memory pool from kmemleak like we already do for the hyp BSS.

Cc: Mike Rapoport rppt@kernel.org Fixes: a7259df76702 ("memblock: make memblock_find_in_range method private") Signed-off-by: Quentin Perret qperret@google.com Acked-by: Catalin Marinas catalin.marinas@arm.com Signed-off-by: Marc Zyngier maz@kernel.org Link: https://lore.kernel.org/r/20220616161135.3997786-1-qperret@google.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/kvm/arm.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c index a66d83540c15..f88919a793ad 100644 --- a/arch/arm64/kvm/arm.c +++ b/arch/arm64/kvm/arm.c @@ -2011,11 +2011,11 @@ static int finalize_hyp_mode(void) return 0;

/* - * Exclude HYP BSS from kmemleak so that it doesn't get peeked - * at, which would end badly once the section is inaccessible. - * None of other sections should ever be introspected. + * Exclude HYP sections from kmemleak so that they don't get peeked + * at, which would end badly once inaccessible. */ kmemleak_free_part(__hyp_bss_start, __hyp_bss_end - __hyp_bss_start); + kmemleak_free_part(__va(hyp_mem_base), hyp_mem_size); return pkvm_drop_host_privileges(); }

From: Jay Vosburgh jay.vosburgh@canonical.com

[ Upstream commit e66e257a5d8368d9c0ba13d4630f474436533e8b ]

Since commit 21a75f0915dd ("bonding: Fix ARP monitor validation"), the bonding ARP / ND link monitors depend on the trans_start time to determine link availability. NETIF_F_LLTX drivers must update trans_start directly, which veth does not do. This prevents use of the ARP or ND link monitors with veth interfaces in a bond.

Resolve this by having veth_xmit update the trans_start time.

Reported-by: Jonathan Toppins jtoppins@redhat.com Tested-by: Jonathan Toppins jtoppins@redhat.com Signed-off-by: Jay Vosburgh jay.vosburgh@canonical.com Fixes: 21a75f0915dd ("bonding: Fix ARP monitor validation") Link: https://lore.kernel.org/netdev/b2fd4147-8f50-bebd-963a-1a3e8d1d9715@redhat.c... Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/veth.c | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/drivers/net/veth.c b/drivers/net/veth.c index eb0121a64d6d..1d1dea07d932 100644 --- a/drivers/net/veth.c +++ b/drivers/net/veth.c @@ -312,6 +312,7 @@ static bool veth_skb_is_eligible_for_gro(const struct net_device *dev, static netdev_tx_t veth_xmit(struct sk_buff *skb, struct net_device *dev) { struct veth_priv *rcv_priv, *priv = netdev_priv(dev); + struct netdev_queue *queue = NULL; struct veth_rq *rq = NULL; struct net_device *rcv; int length = skb->len; @@ -329,6 +330,7 @@ static netdev_tx_t veth_xmit(struct sk_buff *skb, struct net_device *dev) rxq = skb_get_queue_mapping(skb); if (rxq < rcv->real_num_rx_queues) { rq = &rcv_priv->rq[rxq]; + queue = netdev_get_tx_queue(dev, rxq);

/* The napi pointer is available when an XDP program is * attached or when GRO is enabled @@ -340,6 +342,8 @@ static netdev_tx_t veth_xmit(struct sk_buff *skb, struct net_device *dev)

skb_tx_timestamp(skb); if (likely(veth_forward_skb(rcv, skb, rq, use_napi) == NET_RX_SUCCESS)) { + if (queue) + txq_trans_cond_update(queue); if (!use_napi) dev_lstats_add(dev, length); } else {

From: Christoph Hellwig hch@lst.de

[ Upstream commit 50e34d78815e474d410f342fbe783b18192ca518 ]

The elevator is only used for file system requests, which are stopped in del_gendisk. Move disabling the elevator and freeing the scheduler tags to the end of del_gendisk instead of doing that work in disk_release and blk_cleanup_queue to avoid a use after free on q->tag_set from disk_release as the tag_set might not be alive at that point.

Move the blk_qos_exit call as well, as it just depends on the elevator exit and would be the only reason to keep the not exactly cheap queue freeze in disk_release.

Fixes: e155b0c238b2 ("blk-mq: Use shared tags for shared sbitmap support") Reported-by: syzbot+3e3f419f4a7816471838@syzkaller.appspotmail.com Signed-off-by: Christoph Hellwig hch@lst.de Tested-by: syzbot+3e3f419f4a7816471838@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20220614074827.458955-2-hch@lst.de Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- block/blk-core.c | 13 ------------- block/genhd.c | 39 +++++++++++---------------------------- 2 files changed, 11 insertions(+), 41 deletions(-)

diff --git a/block/blk-core.c b/block/blk-core.c index 84f7b7884d07..a7329475aba2 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -322,19 +322,6 @@ void blk_cleanup_queue(struct request_queue *q) blk_mq_exit_queue(q); }

- /* - * In theory, request pool of sched_tags belongs to request queue. - * However, the current implementation requires tag_set for freeing - * requests, so free the pool now. - * - * Queue has become frozen, there can't be any in-queue requests, so - * it is safe to free requests now. - */ - mutex_lock(&q->sysfs_lock); - if (q->elevator) - blk_mq_sched_free_rqs(q); - mutex_unlock(&q->sysfs_lock); - /* @q is and will stay empty, shutdown and put */ blk_put_queue(q); } diff --git a/block/genhd.c b/block/genhd.c index 3008ec213654..13daac1a9aef 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -652,6 +652,17 @@ void del_gendisk(struct gendisk *disk)

blk_sync_queue(q); blk_flush_integrity(); + blk_mq_cancel_work_sync(q); + + blk_mq_quiesce_queue(q); + if (q->elevator) { + mutex_lock(&q->sysfs_lock); + elevator_exit(q); + mutex_unlock(&q->sysfs_lock); + } + rq_qos_exit(q); + blk_mq_unquiesce_queue(q); + /* * Allow using passthrough request again after the queue is torn down. */ @@ -1120,31 +1131,6 @@ static const struct attribute_group *disk_attr_groups[] = { NULL };

-static void disk_release_mq(struct request_queue *q) -{ - blk_mq_cancel_work_sync(q); - - /* - * There can't be any non non-passthrough bios in flight here, but - * requests stay around longer, including passthrough ones so we - * still need to freeze the queue here. - */ - blk_mq_freeze_queue(q); - - /* - * Since the I/O scheduler exit code may access cgroup information, - * perform I/O scheduler exit before disassociating from the block - * cgroup controller. - */ - if (q->elevator) { - mutex_lock(&q->sysfs_lock); - elevator_exit(q); - mutex_unlock(&q->sysfs_lock); - } - rq_qos_exit(q); - __blk_mq_unfreeze_queue(q, true); -} - /** * disk_release - releases all allocated resources of the gendisk * @dev: the device representing this disk @@ -1166,9 +1152,6 @@ static void disk_release(struct device *dev) might_sleep(); WARN_ON_ONCE(disk_live(disk));

- if (queue_is_mq(disk->queue)) - disk_release_mq(disk->queue); - blkcg_exit_queue(disk->queue);

disk_release_events(disk);

From: Lorenzo Bianconi lorenzo@kernel.org

[ Upstream commit 3f6a57ee8544ec3982f8a3cbcbf4aea7d47eb9ec ]

Fix the following use-after-free bug in igb_clean_tx_ring routine when the NIC is running in XDP mode. The issue can be triggered redirecting traffic into the igb NIC and then closing the device while the traffic is flowing.

[ 73.322719] CPU: 1 PID: 487 Comm: xdp_redirect Not tainted 5.18.3-apu2 #9 [ 73.330639] Hardware name: PC Engines APU2/APU2, BIOS 4.0.7 02/28/2017 [ 73.337434] RIP: 0010:refcount_warn_saturate+0xa7/0xf0 [ 73.362283] RSP: 0018:ffffc9000081f798 EFLAGS: 00010282 [ 73.367761] RAX: 0000000000000000 RBX: ffffc90000420f80 RCX: 0000000000000000 [ 73.375200] RDX: ffff88811ad22d00 RSI: ffff88811ad171e0 RDI: ffff88811ad171e0 [ 73.382590] RBP: 0000000000000900 R08: ffffffff82298f28 R09: 0000000000000058 [ 73.390008] R10: 0000000000000219 R11: ffffffff82280f40 R12: 0000000000000090 [ 73.397356] R13: ffff888102343a40 R14: ffff88810359e0e4 R15: 0000000000000000 [ 73.404806] FS: 00007ff38d31d740(0000) GS:ffff88811ad00000(0000) knlGS:0000000000000000 [ 73.413129] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 73.419096] CR2: 000055cff35f13f8 CR3: 0000000106391000 CR4: 00000000000406e0 [ 73.426565] Call Trace: [ 73.429087] <TASK> [ 73.431314] igb_clean_tx_ring+0x43/0x140 [igb] [ 73.436002] igb_down+0x1d7/0x220 [igb] [ 73.439974] __igb_close+0x3c/0x120 [igb] [ 73.444118] igb_xdp+0x10c/0x150 [igb] [ 73.447983] ? igb_pci_sriov_configure+0x70/0x70 [igb] [ 73.453362] dev_xdp_install+0xda/0x110 [ 73.457371] dev_xdp_attach+0x1da/0x550 [ 73.461369] do_setlink+0xfd0/0x10f0 [ 73.465166] ? __nla_validate_parse+0x89/0xc70 [ 73.469714] rtnl_setlink+0x11a/0x1e0 [ 73.473547] rtnetlink_rcv_msg+0x145/0x3d0 [ 73.477709] ? rtnl_calcit.isra.0+0x130/0x130 [ 73.482258] netlink_rcv_skb+0x8d/0x110 [ 73.486229] netlink_unicast+0x230/0x340 [ 73.490317] netlink_sendmsg+0x215/0x470 [ 73.494395] __sys_sendto+0x179/0x190 [ 73.498268] ? move_addr_to_user+0x37/0x70 [ 73.502547] ? __sys_getsockname+0x84/0xe0 [ 73.506853] ? netlink_setsockopt+0x1c1/0x4a0 [ 73.511349] ? __sys_setsockopt+0xc8/0x1d0 [ 73.515636] __x64_sys_sendto+0x20/0x30 [ 73.519603] do_syscall_64+0x3b/0x80 [ 73.523399] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 73.528712] RIP: 0033:0x7ff38d41f20c [ 73.551866] RSP: 002b:00007fff3b945a68 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 73.559640] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ff38d41f20c [ 73.567066] RDX: 0000000000000034 RSI: 00007fff3b945b30 RDI: 0000000000000003 [ 73.574457] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000 [ 73.581852] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff3b945ab0 [ 73.589179] R13: 0000000000000000 R14: 0000000000000003 R15: 00007fff3b945b30 [ 73.596545] </TASK> [ 73.598842] ---[ end trace 0000000000000000 ]---

Fixes: 9cbc948b5a20c ("igb: add XDP support") Signed-off-by: Lorenzo Bianconi lorenzo@kernel.org Reviewed-by: Jesse Brandeburg jesse.brandeburg@intel.com Acked-by: Jesper Dangaard Brouer brouer@redhat.com Link: https://lore.kernel.org/r/e5c01d549dc37bff18e46aeabd6fb28a7bcf84be.165538857... Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/intel/igb/igb_main.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index 68be2976f539..1c26bec7d6fa 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -4819,8 +4819,11 @@ static void igb_clean_tx_ring(struct igb_ring *tx_ring) while (i != tx_ring->next_to_use) { union e1000_adv_tx_desc *eop_desc, *tx_desc;

- /* Free all the Tx ring sk_buffs */ - dev_kfree_skb_any(tx_buffer->skb); + /* Free all the Tx ring sk_buffs or xdp frames */ + if (tx_buffer->type == IGB_TYPE_SKB) + dev_kfree_skb_any(tx_buffer->skb); + else + xdp_return_frame(tx_buffer->xdpf);

/* unmap skb header data */ dma_unmap_single(tx_ring->dev,

From: Ivan Vecera ivecera@redhat.com

[ Upstream commit a3bb7b63813f674fb62bac321cdd897cc62de094 ]

Function fallback_set_params() checks if the module type returned by a driver is ETH_MODULE_SFF_8079 and in this case it assumes that buffer returns a concatenated content of page A0h and A2h. The check is wrong because the correct type is ETH_MODULE_SFF_8472.

Fixes: 96d971e307cc ("ethtool: Add fallback to get_module_eeprom from netlink command") Signed-off-by: Ivan Vecera ivecera@redhat.com Reviewed-by: Ido Schimmel idosch@nvidia.com Link: https://lore.kernel.org/r/20220616160856.3623273-1-ivecera@redhat.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/ethtool/eeprom.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/ethtool/eeprom.c b/net/ethtool/eeprom.c index 7e6b37a54add..1c94bb8ea03f 100644 --- a/net/ethtool/eeprom.c +++ b/net/ethtool/eeprom.c @@ -36,7 +36,7 @@ static int fallback_set_params(struct eeprom_req_info *request, if (request->page) offset = request->page * ETH_MODULE_EEPROM_PAGE_LEN + offset;

- if (modinfo->type == ETH_MODULE_SFF_8079 && + if (modinfo->type == ETH_MODULE_SFF_8472 && request->i2c_address == 0x51) offset += ETH_MODULE_EEPROM_PAGE_LEN * 2;

From: Miaoqian Lin linmq006@gmail.com

[ Upstream commit b9cc4598607cb7f7eae5c75fc1e3209cd52ff5e0 ]

of_graph_get_remote_node() returns remote device node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak.

Fixes: 86418f90a4c1 ("drm: convert drivers to use of_graph_get_remote_node") Signed-off-by: Miaoqian Lin linmq006@gmail.com Reviewed-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org Reviewed-by: Stephen Boyd swboyd@chromium.org Reviewed-by: Abhinav Kumar quic_abhinavk@quicinc.com Patchwork: https://patchwork.freedesktop.org/patch/488473/ Link: https://lore.kernel.org/r/20220607110841.53889-1-linmq006@gmail.com Signed-off-by: Rob Clark robdclark@chromium.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/msm/disp/mdp4/mdp4_kms.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/msm/disp/mdp4/mdp4_kms.c b/drivers/gpu/drm/msm/disp/mdp4/mdp4_kms.c index 3cf476c55158..d92193db7eb2 100644 --- a/drivers/gpu/drm/msm/disp/mdp4/mdp4_kms.c +++ b/drivers/gpu/drm/msm/disp/mdp4/mdp4_kms.c @@ -217,6 +217,7 @@ static int mdp4_modeset_init_intf(struct mdp4_kms *mdp4_kms, encoder = mdp4_lcdc_encoder_init(dev, panel_node); if (IS_ERR(encoder)) { DRM_DEV_ERROR(dev->dev, "failed to construct LCDC encoder\n"); + of_node_put(panel_node); return PTR_ERR(encoder); }

@@ -226,6 +227,7 @@ static int mdp4_modeset_init_intf(struct mdp4_kms *mdp4_kms, connector = mdp4_lvds_connector_init(dev, panel_node, encoder); if (IS_ERR(connector)) { DRM_DEV_ERROR(dev->dev, "failed to initialize LVDS connector\n"); + of_node_put(panel_node); return PTR_ERR(connector); }

From: Kuogee Hsieh quic_khsieh@quicinc.com

[ Upstream commit a6e2af64a79afa7f1b29375b5231e840a84bb845 ]

Display resolution change is implemented through drm modeset. Older modeset (resolution) has to be disabled first before newer modeset (resolution) can be enabled. Display disable will turn off both pixel clock and main link clock so that main link have to be re-trained during display enable to have new video stream flow again. At current implementation, display enable function manually kicks up irq_hpd_handle which will read panel link status and start link training if link status is not in sync state.

However, there is rare case that a particular panel links status keep staying in sync for some period of time after main link had been shut down previously at display disabled. In this case, main link retraining will not be executed by irq_hdp_handle(). Hence video stream of newer display resolution will fail to be transmitted to panel due to main link is not in sync between host and panel.

This patch will bypass irq_hpd_handle() in favor of directly call dp_ctrl_on_stream() to always perform link training in regardless of main link status. So that no unexpected exception resolution change failure cases will happen. Also this implementation are more efficient than manual kicking off irq_hpd_handle function.

Changes in v2: -- set force_link_train flag on DP only (is_edp == false)

Changes in v3: -- revise commit text -- add Fixes tag

Changes in v4: -- revise commit text

Changes in v5: -- fix spelling at commit text

Changes in v6: -- split dp_ctrl_on_stream() for phy test case -- revise commit text for modeset

Changes in v7: -- drop 0 assignment at local variable (ret = 0)

Changes in v8: -- add patch to remove pixel_rate from dp_ctrl

Changes in v9: -- forward declare dp_ctrl_on_stream_phy_test_report()

Fixes: 62671d2ef24b ("drm/msm/dp: fixes wrong connection state caused by failure of link train") Signed-off-by: Kuogee Hsieh quic_khsieh@quicinc.com Reviewed-by: Stephen Boyd swboyd@chromium.org Patchwork: https://patchwork.freedesktop.org/patch/489895/ Link: https://lore.kernel.org/r/1655411200-7255-1-git-send-email-quic_khsieh@quici... Signed-off-by: Rob Clark robdclark@chromium.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/msm/dp/dp_ctrl.c | 33 ++++++++++++++++++++++------- drivers/gpu/drm/msm/dp/dp_ctrl.h | 2 +- drivers/gpu/drm/msm/dp/dp_display.c | 13 ++++++------ 3 files changed, 32 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c index de1974916ad2..499d0bbc442c 100644 --- a/drivers/gpu/drm/msm/dp/dp_ctrl.c +++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c @@ -1523,6 +1523,8 @@ static int dp_ctrl_link_maintenance(struct dp_ctrl_private *ctrl) return ret; }

+static int dp_ctrl_on_stream_phy_test_report(struct dp_ctrl *dp_ctrl); + static int dp_ctrl_process_phy_test_request(struct dp_ctrl_private *ctrl) { int ret = 0; @@ -1545,7 +1547,7 @@ static int dp_ctrl_process_phy_test_request(struct dp_ctrl_private *ctrl)

ret = dp_ctrl_on_link(&ctrl->dp_ctrl); if (!ret) - ret = dp_ctrl_on_stream(&ctrl->dp_ctrl); + ret = dp_ctrl_on_stream_phy_test_report(&ctrl->dp_ctrl); else DRM_ERROR("failed to enable DP link controller\n");

@@ -1800,7 +1802,27 @@ static int dp_ctrl_link_retrain(struct dp_ctrl_private *ctrl) return dp_ctrl_setup_main_link(ctrl, &training_step); }

-int dp_ctrl_on_stream(struct dp_ctrl *dp_ctrl) +static int dp_ctrl_on_stream_phy_test_report(struct dp_ctrl *dp_ctrl) +{ + int ret; + struct dp_ctrl_private *ctrl; + + ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl); + + ctrl->dp_ctrl.pixel_rate = ctrl->panel->dp_mode.drm_mode.clock; + + ret = dp_ctrl_enable_stream_clocks(ctrl); + if (ret) { + DRM_ERROR("Failed to start pixel clocks. ret=%d\n", ret); + return ret; + } + + dp_ctrl_send_phy_test_pattern(ctrl); + + return 0; +} + +int dp_ctrl_on_stream(struct dp_ctrl *dp_ctrl, bool force_link_train) { int ret = 0; bool mainlink_ready = false; @@ -1831,12 +1853,7 @@ int dp_ctrl_on_stream(struct dp_ctrl *dp_ctrl) goto end; }

- if (ctrl->link->sink_request & DP_TEST_LINK_PHY_TEST_PATTERN) { - dp_ctrl_send_phy_test_pattern(ctrl); - return 0; - } - - if (!dp_ctrl_channel_eq_ok(ctrl)) + if (force_link_train || !dp_ctrl_channel_eq_ok(ctrl)) dp_ctrl_link_retrain(ctrl);

/* stop txing train pattern to end link training */ diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.h b/drivers/gpu/drm/msm/dp/dp_ctrl.h index 2433edbc70a6..dcc7af21a5f0 100644 --- a/drivers/gpu/drm/msm/dp/dp_ctrl.h +++ b/drivers/gpu/drm/msm/dp/dp_ctrl.h @@ -20,7 +20,7 @@ struct dp_ctrl { };

int dp_ctrl_on_link(struct dp_ctrl *dp_ctrl); -int dp_ctrl_on_stream(struct dp_ctrl *dp_ctrl); +int dp_ctrl_on_stream(struct dp_ctrl *dp_ctrl, bool force_link_train); int dp_ctrl_off_link_stream(struct dp_ctrl *dp_ctrl); int dp_ctrl_off(struct dp_ctrl *dp_ctrl); void dp_ctrl_push_idle(struct dp_ctrl *dp_ctrl); diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c index d11c81d8a5db..12270bd3cff9 100644 --- a/drivers/gpu/drm/msm/dp/dp_display.c +++ b/drivers/gpu/drm/msm/dp/dp_display.c @@ -903,7 +903,7 @@ static int dp_display_enable(struct dp_display_private *dp, u32 data) return 0; }

- rc = dp_ctrl_on_stream(dp->ctrl); + rc = dp_ctrl_on_stream(dp->ctrl, data); if (!rc) dp_display->power_on = true;

@@ -1590,6 +1590,7 @@ int msm_dp_display_enable(struct msm_dp *dp, struct drm_encoder *encoder) int rc = 0; struct dp_display_private *dp_display; u32 state; + bool force_link_train = false;

dp_display = container_of(dp, struct dp_display_private, dp_display); if (!dp_display->dp_mode.drm_mode.clock) { @@ -1618,10 +1619,12 @@ int msm_dp_display_enable(struct msm_dp *dp, struct drm_encoder *encoder)

state = dp_display->hpd_state;

- if (state == ST_DISPLAY_OFF) + if (state == ST_DISPLAY_OFF) { dp_display_host_phy_init(dp_display); + force_link_train = true; + }

- dp_display_enable(dp_display, 0); + dp_display_enable(dp_display, force_link_train);

rc = dp_display_post_enable(dp); if (rc) { @@ -1630,10 +1633,6 @@ int msm_dp_display_enable(struct msm_dp *dp, struct drm_encoder *encoder) dp_display_unprepare(dp); }

- /* manual kick off plug event to train link */ - if (state == ST_DISPLAY_OFF) - dp_add_event(dp_display, EV_IRQ_HPD_INT, 0, 0); - /* completed connection */ dp_display->hpd_state = ST_CONNECTED;

From: Michael Petlan mpetlan@redhat.com

[ Upstream commit 72dcae8efd42699bbfd55e1ef187310c4e2e5dcb ]

The testcase 'Check Arm64 callgraphs are complete in fp mode' wants to see the following output:

610 leaf 62f parent 648 main

However, without excluding kernel callchains, the output might look like:

ffffc2ff40ef1b5c arch_local_irq_enable ffffc2ff419d032c __schedule ffffc2ff419d06c0 schedule ffffc2ff40e4da30 do_notify_resume ffffc2ff40e421b0 work_pending 610 leaf 62f parent 648 main

Adding '--user-callchains' leaves only the wanted symbols in the chain.

Fixes: cd6382d82752737e ("perf test arm64: Test unwinding using fame-pointer (fp) mode") Suggested-by: German Gomez german.gomez@arm.com Reviewed-by: German Gomez german.gomez@arm.com Reviewed-by: Leo Yan leo.yan@linaro.org Signed-off-by: Michael Petlan mpetlan@redhat.com Cc: German Gomez german.gomez@arm.com Cc: Jiri Olsa jolsa@kernel.org Link: https://lore.kernel.org/r/20220614105207.26223-1-mpetlan@redhat.com Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/perf/tests/shell/test_arm_callgraph_fp.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/perf/tests/shell/test_arm_callgraph_fp.sh b/tools/perf/tests/shell/test_arm_callgraph_fp.sh index 6ffbb27afaba..ec108d45d3c6 100755 --- a/tools/perf/tests/shell/test_arm_callgraph_fp.sh +++ b/tools/perf/tests/shell/test_arm_callgraph_fp.sh @@ -43,7 +43,7 @@ CFLAGS="-g -O0 -fno-inline -fno-omit-frame-pointer" cc $CFLAGS $TEST_PROGRAM_SOURCE -o $TEST_PROGRAM || exit 1

# Add a 1 second delay to skip samples that are not in the leaf() function -perf record -o $PERF_DATA --call-graph fp -e cycles//u -D 1000 -- $TEST_PROGRAM 2> /dev/null & +perf record -o $PERF_DATA --call-graph fp -e cycles//u -D 1000 --user-callchains -- $TEST_PROGRAM 2> /dev/null & PID=$!

echo " + Recording (PID=$PID)..."

From: Leo Yan leo.yan@linaro.org

[ Upstream commit 51ba539f5bdb5a8cc7b1dedd5e73ac54564a7602 ]

Except for memory load and store operations, ARM SPE records also can support other operation types, bug when set the data source field the current code assumes a record is a either load operation or store operation, this leads to wrongly synthesize memory samples.

This patch strictly checks the record operation type, it only sets data source only for the operation types ARM_SPE_LD and ARM_SPE_ST, otherwise, returns zero for data source. Therefore, we can synthesize memory samples only when data source is a non-zero value, the function arm_spe__is_memory_event() is useless and removed.

Fixes: e55ed3423c1bb29f ("perf arm-spe: Synthesize memory event") Reviewed-by: Ali Saidi alisaidi@amazon.com Reviewed-by: German Gomez german.gomez@arm.com Signed-off-by: Leo Yan leo.yan@linaro.org Tested-by: Ali Saidi alisaidi@amazon.com Cc: Alexander Shishkin alexander.shishkin@linux.intel.com Cc: alisaidi@amazon.com Cc: Andrew Kilroy andrew.kilroy@arm.com Cc: Benjamin Herrenschmidt benh@kernel.crashing.org Cc: James Clark james.clark@arm.com Cc: Jiri Olsa jolsa@kernel.org Cc: John Garry john.garry@huawei.com Cc: Kajol Jain kjain@linux.ibm.com Cc: Leo Yan leo.yan@linaro.org Cc: Li Huafei lihuafei1@huawei.com Cc: linux-arm-kernel@lists.infradead.org Cc: Mark Rutland mark.rutland@arm.com Cc: Mathieu Poirier mathieu.poirier@linaro.org Cc: Namhyung Kim namhyung@kernel.org Cc: Nick Forrington nick.forrington@arm.com Cc: Peter Zijlstra peterz@infradead.org Cc: Will Deacon will@kernel.org Link: http://lore.kernel.org/lkml/20220517020326.18580-5-alisaidi@amazon.com Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/perf/util/arm-spe.c | 22 ++++++++-------------- 1 file changed, 8 insertions(+), 14 deletions(-)

diff --git a/tools/perf/util/arm-spe.c b/tools/perf/util/arm-spe.c index 1a80151baed9..d040406f3314 100644 --- a/tools/perf/util/arm-spe.c +++ b/tools/perf/util/arm-spe.c @@ -387,26 +387,16 @@ static int arm_spe__synth_instruction_sample(struct arm_spe_queue *speq, return arm_spe_deliver_synth_event(spe, speq, event, &sample); }

-#define SPE_MEM_TYPE (ARM_SPE_L1D_ACCESS | ARM_SPE_L1D_MISS | \ - ARM_SPE_LLC_ACCESS | ARM_SPE_LLC_MISS | \ - ARM_SPE_REMOTE_ACCESS) - -static bool arm_spe__is_memory_event(enum arm_spe_sample_type type) -{ - if (type & SPE_MEM_TYPE) - return true; - - return false; -} - static u64 arm_spe__synth_data_source(const struct arm_spe_record *record) { union perf_mem_data_src data_src = { 0 };

if (record->op == ARM_SPE_LD) data_src.mem_op = PERF_MEM_OP_LOAD; - else + else if (record->op == ARM_SPE_ST) data_src.mem_op = PERF_MEM_OP_STORE; + else + return 0;

if (record->type & (ARM_SPE_LLC_ACCESS | ARM_SPE_LLC_MISS)) { data_src.mem_lvl = PERF_MEM_LVL_L3; @@ -510,7 +500,11 @@ static int arm_spe_sample(struct arm_spe_queue *speq) return err; }

- if (spe->sample_memory && arm_spe__is_memory_event(record->type)) { + /* + * When data_src is zero it means the record is not a memory operation, + * skip to synthesize memory sample for this case. + */ + if (spe->sample_memory && data_src) { err = arm_spe__synth_mem_sample(speq, spe->memory_id, data_src); if (err) return err;

From: Eric Dumazet edumazet@google.com

[ Upstream commit 301bd140ed0b24f0da660874c7e8a47dad8c8222 ]

Rewrite tests in ip6erspan_tunnel_xmit() and erspan_fb_xmit() to not assume transport header is set.

syzbot reported:

WARNING: CPU: 0 PID: 1350 at include/linux/skbuff.h:2911 skb_transport_header include/linux/skbuff.h:2911 [inline] WARNING: CPU: 0 PID: 1350 at include/linux/skbuff.h:2911 ip6erspan_tunnel_xmit+0x15af/0x2eb0 net/ipv6/ip6_gre.c:963 Modules linked in: CPU: 0 PID: 1350 Comm: aoe_tx0 Not tainted 5.19.0-rc2-syzkaller-00160-g274295c6e53f #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 RIP: 0010:skb_transport_header include/linux/skbuff.h:2911 [inline] RIP: 0010:ip6erspan_tunnel_xmit+0x15af/0x2eb0 net/ipv6/ip6_gre.c:963 Code: 0f 47 f0 40 88 b5 7f fe ff ff e8 8c 16 4b f9 89 de bf ff ff ff ff e8 a0 12 4b f9 66 83 fb ff 0f 85 1d f1 ff ff e8 71 16 4b f9 <0f> 0b e9 43 f0 ff ff e8 65 16 4b f9 48 8d 85 30 ff ff ff ba 60 00 RSP: 0018:ffffc90005daf910 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 000000000000ffff RCX: 0000000000000000 RDX: ffff88801f032100 RSI: ffffffff882e8d3f RDI: 0000000000000003 RBP: ffffc90005dafab8 R08: 0000000000000003 R09: 000000000000ffff R10: 000000000000ffff R11: 0000000000000000 R12: ffff888024f21d40 R13: 000000000000a288 R14: 00000000000000b0 R15: ffff888025a2e000 FS: 0000000000000000(0000) GS:ffff88802c800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2e425000 CR3: 000000006d099000 CR4: 0000000000152ef0 Call Trace: <TASK> __netdev_start_xmit include/linux/netdevice.h:4805 [inline] netdev_start_xmit include/linux/netdevice.h:4819 [inline] xmit_one net/core/dev.c:3588 [inline] dev_hard_start_xmit+0x188/0x880 net/core/dev.c:3604 sch_direct_xmit+0x19f/0xbe0 net/sched/sch_generic.c:342 __dev_xmit_skb net/core/dev.c:3815 [inline] __dev_queue_xmit+0x14a1/0x3900 net/core/dev.c:4219 dev_queue_xmit include/linux/netdevice.h:2994 [inline] tx+0x6a/0xc0 drivers/block/aoe/aoenet.c:63 kthread+0x1e7/0x3b0 drivers/block/aoe/aoecmd.c:1229 kthread+0x2e9/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:302 </TASK>

Fixes: d5db21a3e697 ("erspan: auto detect truncated ipv6 packets.") Reported-by: syzbot syzkaller@googlegroups.com Signed-off-by: Eric Dumazet edumazet@google.com Cc: William Tu u9012063@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/ipv4/ip_gre.c | 15 ++++++++++----- net/ipv6/ip6_gre.c | 15 ++++++++++----- 2 files changed, 20 insertions(+), 10 deletions(-)

diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c index bc8dfdf1c48a..318673517976 100644 --- a/net/ipv4/ip_gre.c +++ b/net/ipv4/ip_gre.c @@ -524,7 +524,6 @@ static void erspan_fb_xmit(struct sk_buff *skb, struct net_device *dev) int tunnel_hlen; int version; int nhoff; - int thoff;

tun_info = skb_tunnel_info(skb); if (unlikely(!tun_info || !(tun_info->mode & IP_TUNNEL_INFO_TX) || @@ -558,10 +557,16 @@ static void erspan_fb_xmit(struct sk_buff *skb, struct net_device *dev) (ntohs(ip_hdr(skb)->tot_len) > skb->len - nhoff)) truncate = true;

- thoff = skb_transport_header(skb) - skb_mac_header(skb); - if (skb->protocol == htons(ETH_P_IPV6) && - (ntohs(ipv6_hdr(skb)->payload_len) > skb->len - thoff)) - truncate = true; + if (skb->protocol == htons(ETH_P_IPV6)) { + int thoff; + + if (skb_transport_header_was_set(skb)) + thoff = skb_transport_header(skb) - skb_mac_header(skb); + else + thoff = nhoff + sizeof(struct ipv6hdr); + if (ntohs(ipv6_hdr(skb)->payload_len) > skb->len - thoff) + truncate = true; + }

if (version == 1) { erspan_build_header(skb, ntohl(tunnel_id_to_key32(key->tun_id)), diff --git a/net/ipv6/ip6_gre.c b/net/ipv6/ip6_gre.c index 5136959b3dc5..b996ccaff56e 100644 --- a/net/ipv6/ip6_gre.c +++ b/net/ipv6/ip6_gre.c @@ -944,7 +944,6 @@ static netdev_tx_t ip6erspan_tunnel_xmit(struct sk_buff *skb, __be16 proto; __u32 mtu; int nhoff; - int thoff;

if (!pskb_inet_may_pull(skb)) goto tx_err; @@ -965,10 +964,16 @@ static netdev_tx_t ip6erspan_tunnel_xmit(struct sk_buff *skb, (ntohs(ip_hdr(skb)->tot_len) > skb->len - nhoff)) truncate = true;

- thoff = skb_transport_header(skb) - skb_mac_header(skb); - if (skb->protocol == htons(ETH_P_IPV6) && - (ntohs(ipv6_hdr(skb)->payload_len) > skb->len - thoff)) - truncate = true; + if (skb->protocol == htons(ETH_P_IPV6)) { + int thoff; + + if (skb_transport_header_was_set(skb)) + thoff = skb_transport_header(skb) - skb_mac_header(skb); + else + thoff = nhoff + sizeof(struct ipv6hdr); + if (ntohs(ipv6_hdr(skb)->payload_len) > skb->len - thoff) + truncate = true; + }

if (skb_cow_head(skb, dev->needed_headroom ?: t->hlen)) goto tx_err;

From: Gerd Hoffmann kraxel@redhat.com

[ Upstream commit 05b252cccb2e5c3f56119d25de684b4f810ba40a ]

Check vm_fault->pgoff before using it. When we removed the warning, we also removed the check.

Fixes: 7b26e4e2119d ("udmabuf: drop WARN_ON() check.") Reported-by: zdi-disclosures@trendmicro.com Suggested-by: Linus Torvalds torvalds@linuxfoundation.org Signed-off-by: Gerd Hoffmann kraxel@redhat.com Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/dma-buf/udmabuf.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/dma-buf/udmabuf.c b/drivers/dma-buf/udmabuf.c index e7330684d3b8..9631f2fd2faf 100644 --- a/drivers/dma-buf/udmabuf.c +++ b/drivers/dma-buf/udmabuf.c @@ -32,8 +32,11 @@ static vm_fault_t udmabuf_vm_fault(struct vm_fault *vmf) { struct vm_area_struct *vma = vmf->vma; struct udmabuf *ubuf = vma->vm_private_data; + pgoff_t pgoff = vmf->pgoff;

- vmf->page = ubuf->pages[vmf->pgoff]; + if (pgoff >= ubuf->pagecount) + return VM_FAULT_SIGBUS; + vmf->page = ubuf->pages[pgoff]; get_page(vmf->page); return 0; }

From: Florian Westphal fw@strlen.de

[ Upstream commit 574a5b85dc3b9ab672ff3fba0ee020f927960648 ]

Eric reports skb_under_panic when using dup/fwd via bond+egress hook. Before pushing mac header, we should make sure that we're called from ingress to put back what was pulled earlier.

In egress case, the MAC header is already there; we should leave skb alone.

While at it be more careful here: skb might have been altered and headroom reduced, so add a skb_cow() before so that headroom is increased if necessary.

nf_do_netdev_egress() assumes skb ownership (it normally ends with a call to dev_queue_xmit), so we must free the packet on error.

Fixes: f87b9464d152 ("netfilter: nft_fwd_netdev: Support egress hook") Reported-by: Eric Garver eric@garver.life Signed-off-by: Florian Westphal fw@strlen.de Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/nf_dup_netdev.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/net/netfilter/nf_dup_netdev.c b/net/netfilter/nf_dup_netdev.c index 7873bd1389c3..13b7f6a66086 100644 --- a/net/netfilter/nf_dup_netdev.c +++ b/net/netfilter/nf_dup_netdev.c @@ -13,10 +13,16 @@ #include <net/netfilter/nf_tables_offload.h> #include <net/netfilter/nf_dup_netdev.h>

-static void nf_do_netdev_egress(struct sk_buff *skb, struct net_device *dev) +static void nf_do_netdev_egress(struct sk_buff *skb, struct net_device *dev, + enum nf_dev_hooks hook) { - if (skb_mac_header_was_set(skb)) + if (hook == NF_NETDEV_INGRESS && skb_mac_header_was_set(skb)) { + if (skb_cow_head(skb, skb->mac_len)) { + kfree_skb(skb); + return; + } skb_push(skb, skb->mac_len); + }

skb->dev = dev; skb_clear_tstamp(skb); @@ -33,7 +39,7 @@ void nf_fwd_netdev_egress(const struct nft_pktinfo *pkt, int oif) return; }

- nf_do_netdev_egress(pkt->skb, dev); + nf_do_netdev_egress(pkt->skb, dev, nft_hook(pkt)); } EXPORT_SYMBOL_GPL(nf_fwd_netdev_egress);

@@ -48,7 +54,7 @@ void nf_dup_netdev_egress(const struct nft_pktinfo *pkt, int oif)

skb = skb_clone(pkt->skb, GFP_ATOMIC); if (skb) - nf_do_netdev_egress(skb, dev); + nf_do_netdev_egress(skb, dev, nft_hook(pkt)); } EXPORT_SYMBOL_GPL(nf_dup_netdev_egress);

From: Jason Andryuk jandryuk@gmail.com

[ Upstream commit f9710c357e5bbf64d7ce45ba0bc75a52222491c1 ]

When a VBD is not fully created and then closed, the kernel can have a NULL pointer dereference:

The reproducer is trivial:

[user@dom0 ~]$ sudo xl block-attach work backend=sys-usb vdev=xvdi target=/dev/sdz [user@dom0 ~]$ xl block-list work Vdev BE handle state evt-ch ring-ref BE-path 51712 0 241 4 -1 -1 /local/domain/0/backend/vbd/241/51712 51728 0 241 4 -1 -1 /local/domain/0/backend/vbd/241/51728 51744 0 241 4 -1 -1 /local/domain/0/backend/vbd/241/51744 51760 0 241 4 -1 -1 /local/domain/0/backend/vbd/241/51760 51840 3 241 3 -1 -1 /local/domain/3/backend/vbd/241/51840 ^ note state, the /dev/sdz doesn't exist in the backend

[user@dom0 ~]$ sudo xl block-detach work xvdi [user@dom0 ~]$ xl block-list work Vdev BE handle state evt-ch ring-ref BE-path work is an invalid domain identifier

And its console has:

BUG: kernel NULL pointer dereference, address: 0000000000000050 PGD 80000000edebb067 P4D 80000000edebb067 PUD edec2067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 52 Comm: xenwatch Not tainted 5.16.18-2.43.fc32.qubes.x86_64 #1 RIP: 0010:blk_mq_stop_hw_queues+0x5/0x40 Code: 00 48 83 e0 fd 83 c3 01 48 89 85 a8 00 00 00 41 39 5c 24 50 77 c0 5b 5d 41 5c 41 5d c3 c3 0f 1f 80 00 00 00 00 0f 1f 44 00 00 <8b> 47 50 85 c0 74 32 41 54 49 89 fc 55 53 31 db 49 8b 44 24 48 48 RSP: 0018:ffffc90000bcfe98 EFLAGS: 00010293 RAX: ffffffffc0008370 RBX: 0000000000000005 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000005 RDI: 0000000000000000 RBP: ffff88800775f000 R08: 0000000000000001 R09: ffff888006e620b8 R10: ffff888006e620b0 R11: f000000000000000 R12: ffff8880bff39000 R13: ffff8880bff39000 R14: 0000000000000000 R15: ffff88800604be00 FS: 0000000000000000(0000) GS:ffff8880f3300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000050 CR3: 00000000e932e002 CR4: 00000000003706e0 Call Trace: <TASK> blkback_changed+0x95/0x137 [xen_blkfront] ? read_reply+0x160/0x160 xenwatch_thread+0xc0/0x1a0 ? do_wait_intr_irq+0xa0/0xa0 kthread+0x16b/0x190 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x22/0x30 </TASK> Modules linked in: snd_seq_dummy snd_hrtimer snd_seq snd_seq_device snd_timer snd soundcore ipt_REJECT nf_reject_ipv4 xt_state xt_conntrack nft_counter nft_chain_nat xt_MASQUERADE nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nft_compat nf_tables nfnetlink intel_rapl_msr intel_rapl_common crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel xen_netfront pcspkr xen_scsiback target_core_mod xen_netback xen_privcmd xen_gntdev xen_gntalloc xen_blkback xen_evtchn ipmi_devintf ipmi_msghandler fuse bpf_preload ip_tables overlay xen_blkfront CR2: 0000000000000050 ---[ end trace 7bc9597fd06ae89d ]--- RIP: 0010:blk_mq_stop_hw_queues+0x5/0x40 Code: 00 48 83 e0 fd 83 c3 01 48 89 85 a8 00 00 00 41 39 5c 24 50 77 c0 5b 5d 41 5c 41 5d c3 c3 0f 1f 80 00 00 00 00 0f 1f 44 00 00 <8b> 47 50 85 c0 74 32 41 54 49 89 fc 55 53 31 db 49 8b 44 24 48 48 RSP: 0018:ffffc90000bcfe98 EFLAGS: 00010293 RAX: ffffffffc0008370 RBX: 0000000000000005 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000005 RDI: 0000000000000000 RBP: ffff88800775f000 R08: 0000000000000001 R09: ffff888006e620b8 R10: ffff888006e620b0 R11: f000000000000000 R12: ffff8880bff39000 R13: ffff8880bff39000 R14: 0000000000000000 R15: ffff88800604be00 FS: 0000000000000000(0000) GS:ffff8880f3300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000050 CR3: 00000000e932e002 CR4: 00000000003706e0 Kernel panic - not syncing: Fatal exception Kernel Offset: disabled

info->rq and info->gd are only set in blkfront_connect(), which is called for state 4 (XenbusStateConnected). Guard against using NULL variables in blkfront_closing() to avoid the issue.

The rest of blkfront_closing looks okay. If info->nr_rings is 0, then for_each_rinfo won't do anything.

blkfront_remove also needs to check for non-NULL pointers before cleaning up the gendisk and request queue.

Fixes: 05d69d950d9d "xen-blkfront: sanitize the removal state machine" Reported-by: Marek Marczykowski-Górecki marmarek@invisiblethingslab.com Signed-off-by: Jason Andryuk jandryuk@gmail.com Reviewed-by: Juergen Gross jgross@suse.com Link: https://lore.kernel.org/r/20220601195341.28581-1-jandryuk@gmail.com Signed-off-by: Juergen Gross jgross@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/block/xen-blkfront.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-)

diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index 003056d4f7f5..966a6bf4c162 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -2137,9 +2137,11 @@ static void blkfront_closing(struct blkfront_info *info) return;

/* No more blkif_request(). */ - blk_mq_stop_hw_queues(info->rq); - blk_mark_disk_dead(info->gd); - set_capacity(info->gd, 0); + if (info->rq && info->gd) { + blk_mq_stop_hw_queues(info->rq); + blk_mark_disk_dead(info->gd); + set_capacity(info->gd, 0); + }

for_each_rinfo(info, rinfo, i) { /* No more gnttab callback work. */ @@ -2480,16 +2482,19 @@ static int blkfront_remove(struct xenbus_device *xbdev)

dev_dbg(&xbdev->dev, "%s removed", xbdev->nodename);

- del_gendisk(info->gd); + if (info->gd) + del_gendisk(info->gd);

mutex_lock(&blkfront_mutex); list_del(&info->info_list); mutex_unlock(&blkfront_mutex);

blkif_free(info, 0); - xlbd_release_minors(info->gd->first_minor, info->gd->minors); - blk_cleanup_disk(info->gd); - blk_mq_free_tag_set(&info->tag_set); + if (info->gd) { + xlbd_release_minors(info->gd->first_minor, info->gd->minors); + blk_cleanup_disk(info->gd); + blk_mq_free_tag_set(&info->tag_set); + }

kfree(info); return 0;

From: huhai huhai@kylinos.cn

[ Upstream commit c81aba8fde2aee4f5778ebab3a1d51bd2ef48e4c ]

commit 979934da9e7a ("[PATCH] mips: update IRQ handling for vr41xx") added a function irq_dispatch, and it'll increase irq_err_count when the get_irq callback returns a negative value, but increase irq_err_count in get_irq was not removed.

And also, modpost complains once gpio-vr41xx drivers become modules. ERROR: modpost: "irq_err_count" [drivers/gpio/gpio-vr41xx.ko] undefined!

So it would be a good idea to remove repetitive increase irq_err_count in get_irq callback.

Fixes: 27fdd325dace ("MIPS: Update VR41xx GPIO driver to use gpiolib") Fixes: 979934da9e7a ("[PATCH] mips: update IRQ handling for vr41xx") Reported-by: k2ci kernel-bot@kylinos.cn Signed-off-by: huhai huhai@kylinos.cn Signed-off-by: Genjian Zhang zhanggenjian@kylinos.cn Signed-off-by: Thomas Bogendoerfer tsbogend@alpha.franken.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/mips/vr41xx/common/icu.c | 2 -- drivers/gpio/gpio-vr41xx.c | 2 -- 2 files changed, 4 deletions(-)

diff --git a/arch/mips/vr41xx/common/icu.c b/arch/mips/vr41xx/common/icu.c index 7b7f25b4b057..9240bcdbe74e 100644 --- a/arch/mips/vr41xx/common/icu.c +++ b/arch/mips/vr41xx/common/icu.c @@ -640,8 +640,6 @@ static int icu_get_irq(unsigned int irq)

printk(KERN_ERR "spurious ICU interrupt: %04x,%04x\n", pend1, pend2);

- atomic_inc(&irq_err_count); - return -1; }

diff --git a/drivers/gpio/gpio-vr41xx.c b/drivers/gpio/gpio-vr41xx.c index 98cd715ccc33..8d09b619c166 100644 --- a/drivers/gpio/gpio-vr41xx.c +++ b/drivers/gpio/gpio-vr41xx.c @@ -217,8 +217,6 @@ static int giu_get_irq(unsigned int irq) printk(KERN_ERR "spurious GIU interrupt: %04x(%04x),%04x(%04x)\n", maskl, pendl, maskh, pendh);

- atomic_inc(&irq_err_count); - return -EINVAL; }

From: Jens Axboe axboe@kernel.dk

[ Upstream commit 2645672ffe21f0a1c139bfbc05ad30fd4e4f2583 ]

If rq_qos_throttle() ends up blocking, then we will have invalidated and flushed our current plug. Since blk_mq_get_cached_request() hasn't popped the cached request off the plug list just yet, we end holding a pointer to a request that is no longer valid. This insta-crashes with rq->mq_hctx being NULL in the validity checks just after.

Pop the request off the cached list before doing rq_qos_throttle() to avoid using a potentially stale request.

Fixes: 0a5aa8d161d1 ("block: fix blk_mq_attempt_bio_merge and rq_qos_throttle protection") Reported-by: Dylan Yudaken dylany@fb.com Tested-by: Dylan Yudaken dylany@fb.com Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- block/blk-mq.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/block/blk-mq.c b/block/blk-mq.c index 631fb87b4976..37caa73bff89 100644 --- a/block/blk-mq.c +++ b/block/blk-mq.c @@ -2777,15 +2777,20 @@ static inline struct request *blk_mq_get_cached_request(struct request_queue *q, return NULL; }

- rq_qos_throttle(q, *bio); - if (blk_mq_get_hctx_type((*bio)->bi_opf) != rq->mq_hctx->type) return NULL; if (op_is_flush(rq->cmd_flags) != op_is_flush((*bio)->bi_opf)) return NULL;

- rq->cmd_flags = (*bio)->bi_opf; + /* + * If any qos ->throttle() end up blocking, we will have flushed the + * plug and hence killed the cached_rq list as well. Pop this entry + * before we throttle. + */ plug->cached_rq = rq_list_next(rq); + rq_qos_throttle(q, *bio); + + rq->cmd_flags = (*bio)->bi_opf; INIT_LIST_HEAD(&rq->queuelist); return rq; }

From: Wojciech Drewek wojciech.drewek@intel.com

[ Upstream commit 3578dc90013b1fa20da996cdadd8515802716132 ]

Adding two filters with same matching criteria ends up with one rule in hardware with act = ICE_FWD_TO_VSI_LIST. In order to remove them properly we have to keep the information about vsi handle which is used in VSI bitmap (ice_adv_fltr_mgmt_list_entry::vsi_list_info::vsi_map).

Fixes: 0d08a441fb1a ("ice: ndo_setup_tc implementation for PF") Reported-by: Sridhar Samudrala sridhar.samudrala@intel.com Signed-off-by: Wojciech Drewek wojciech.drewek@intel.com Tested-by: Sandeep Penigalapati sandeep.penigalapati@intel.com Signed-off-by: Tony Nguyen anthony.l.nguyen@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/intel/ice/ice_tc_lib.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/intel/ice/ice_tc_lib.c b/drivers/net/ethernet/intel/ice/ice_tc_lib.c index 734bfa121e24..2ce2694fcbd7 100644 --- a/drivers/net/ethernet/intel/ice/ice_tc_lib.c +++ b/drivers/net/ethernet/intel/ice/ice_tc_lib.c @@ -524,6 +524,7 @@ ice_eswitch_add_tc_fltr(struct ice_vsi *vsi, struct ice_tc_flower_fltr *fltr) */ fltr->rid = rule_added.rid; fltr->rule_id = rule_added.rule_id; + fltr->dest_id = rule_added.vsi_handle;

exit: kfree(list);

From: Anatolii Gerasymenko anatolii.gerasymenko@intel.com

[ Upstream commit a632b2a4c920ce5af29410fb091f7ee6d2e77dc6 ]

Do not allow setting less channels, than Traffic Classes there are via ethtool. There must be at least one channel per Traffic Class.

If you set less channels, than Traffic Classes there are, then during ice_vsi_rebuild there would be allocated only the requested amount of tx/rx rings in ice_vsi_alloc_arrays. But later in ice_vsi_setup_q_map there would be requested at least one channel per Traffic Class. This results in setting num_rxq > alloc_rxq and num_txq > alloc_txq. Later, there would be a NULL pointer dereference in ice_vsi_map_rings_to_vectors, because we go beyond of rx_rings or tx_rings arrays.

Change ice_set_channels() to return error if you try to allocate less channels, than Traffic Classes there are. Change ice_vsi_setup_q_map() and ice_vsi_setup_q_map_mqprio() to return status code instead of void. Add error handling for ice_vsi_setup_q_map() and ice_vsi_setup_q_map_mqprio() in ice_vsi_init() and ice_vsi_cfg_tc().

[53753.889983] INFO: Flow control is disabled for this traffic class (0) on this vsi. [53763.984862] BUG: unable to handle kernel NULL pointer dereference at 0000000000000028 [53763.992915] PGD 14b45f5067 P4D 0 [53763.996444] Oops: 0002 [#1] SMP NOPTI [53764.000312] CPU: 12 PID: 30661 Comm: ethtool Kdump: loaded Tainted: GOE --------- - - 4.18.0-240.el8.x86_64 #1 [53764.011825] Hardware name: Intel Corporation WilsonCity/WilsonCity, BIOS WLYDCRB1.SYS.0020.P21.2012150710 12/15/2020 [53764.022584] RIP: 0010:ice_vsi_map_rings_to_vectors+0x7e/0x120 [ice] [53764.029089] Code: 41 0d 0f b7 b7 12 05 00 00 0f b6 d0 44 29 de 44 0f b7 c6 44 01 c2 41 39 d0 7d 2d 4c 8b 47 28 44 0f b7 ce 83 c6 01 4f 8b 04 c8 <49> 89 48 28 4 c 8b 89 b8 01 00 00 4d 89 08 4c 89 81 b8 01 00 00 44 [53764.048379] RSP: 0018:ff550dd88ea47b20 EFLAGS: 00010206 [53764.053884] RAX: 0000000000000002 RBX: 0000000000000004 RCX: ff385ea42fa4a018 [53764.061301] RDX: 0000000000000006 RSI: 0000000000000005 RDI: ff385e9baeedd018 [53764.068717] RBP: 0000000000000010 R08: 0000000000000000 R09: 0000000000000004 [53764.076133] R10: 0000000000000002 R11: 0000000000000004 R12: 0000000000000000 [53764.083553] R13: 0000000000000000 R14: ff385e658fdd9000 R15: ff385e9baeedd018 [53764.090976] FS: 000014872c5b5740(0000) GS:ff385e847f100000(0000) knlGS:0000000000000000 [53764.099362] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [53764.105409] CR2: 0000000000000028 CR3: 0000000a820fa002 CR4: 0000000000761ee0 [53764.112851] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [53764.120301] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [53764.127747] PKRU: 55555554 [53764.130781] Call Trace: [53764.133564] ice_vsi_rebuild+0x611/0x870 [ice] [53764.138341] ice_vsi_recfg_qs+0x94/0x100 [ice] [53764.143116] ice_set_channels+0x1a8/0x3e0 [ice] [53764.147975] ethtool_set_channels+0x14e/0x240 [53764.152667] dev_ethtool+0xd74/0x2a10 [53764.156665] ? __mod_lruvec_state+0x44/0x110 [53764.161280] ? __mod_lruvec_state+0x44/0x110 [53764.165893] ? page_add_file_rmap+0x15/0x170 [53764.170518] ? inet_ioctl+0xd1/0x220 [53764.174445] ? netdev_run_todo+0x5e/0x290 [53764.178808] dev_ioctl+0xb5/0x550 [53764.182485] sock_do_ioctl+0xa0/0x140 [53764.186512] sock_ioctl+0x1a8/0x300 [53764.190367] ? selinux_file_ioctl+0x161/0x200 [53764.195090] do_vfs_ioctl+0xa4/0x640 [53764.199035] ksys_ioctl+0x60/0x90 [53764.202722] __x64_sys_ioctl+0x16/0x20 [53764.206845] do_syscall_64+0x5b/0x1a0 [53764.210887] entry_SYSCALL_64_after_hwframe+0x65/0xca

Fixes: 87324e747fde ("ice: Implement ethtool ops for channels") Signed-off-by: Anatolii Gerasymenko anatolii.gerasymenko@intel.com Tested-by: Gurucharan gurucharanx.g@intel.com (A Contingent worker at Intel) Signed-off-by: Tony Nguyen anthony.l.nguyen@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/intel/ice/ice_ethtool.c | 10 +++++ drivers/net/ethernet/intel/ice/ice_lib.c | 42 +++++++++++++++++--- 2 files changed, 47 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_ethtool.c b/drivers/net/ethernet/intel/ice/ice_ethtool.c index 2a6f30c26592..8aee4ae4cc8c 100644 --- a/drivers/net/ethernet/intel/ice/ice_ethtool.c +++ b/drivers/net/ethernet/intel/ice/ice_ethtool.c @@ -3477,6 +3477,16 @@ static int ice_set_channels(struct net_device *dev, struct ethtool_channels *ch) new_rx = ch->combined_count + ch->rx_count; new_tx = ch->combined_count + ch->tx_count;

+ if (new_rx < vsi->tc_cfg.numtc) { + netdev_err(dev, "Cannot set less Rx channels, than Traffic Classes you have (%u)\n", + vsi->tc_cfg.numtc); + return -EINVAL; + } + if (new_tx < vsi->tc_cfg.numtc) { + netdev_err(dev, "Cannot set less Tx channels, than Traffic Classes you have (%u)\n", + vsi->tc_cfg.numtc); + return -EINVAL; + } if (new_rx > ice_get_max_rxq(pf)) { netdev_err(dev, "Maximum allowed Rx channels is %d\n", ice_get_max_rxq(pf)); diff --git a/drivers/net/ethernet/intel/ice/ice_lib.c b/drivers/net/ethernet/intel/ice/ice_lib.c index 454e01ae09b9..f7f9c973ec54 100644 --- a/drivers/net/ethernet/intel/ice/ice_lib.c +++ b/drivers/net/ethernet/intel/ice/ice_lib.c @@ -909,7 +909,7 @@ static void ice_set_dflt_vsi_ctx(struct ice_hw *hw, struct ice_vsi_ctx *ctxt) * @vsi: the VSI being configured * @ctxt: VSI context structure */ -static void ice_vsi_setup_q_map(struct ice_vsi *vsi, struct ice_vsi_ctx *ctxt) +static int ice_vsi_setup_q_map(struct ice_vsi *vsi, struct ice_vsi_ctx *ctxt) { u16 offset = 0, qmap = 0, tx_count = 0, pow = 0; u16 num_txq_per_tc, num_rxq_per_tc; @@ -982,7 +982,18 @@ static void ice_vsi_setup_q_map(struct ice_vsi *vsi, struct ice_vsi_ctx *ctxt) else vsi->num_rxq = num_rxq_per_tc;

+ if (vsi->num_rxq > vsi->alloc_rxq) { + dev_err(ice_pf_to_dev(vsi->back), "Trying to use more Rx queues (%u), than were allocated (%u)!\n", + vsi->num_rxq, vsi->alloc_rxq); + return -EINVAL; + } + vsi->num_txq = tx_count; + if (vsi->num_txq > vsi->alloc_txq) { + dev_err(ice_pf_to_dev(vsi->back), "Trying to use more Tx queues (%u), than were allocated (%u)!\n", + vsi->num_txq, vsi->alloc_txq); + return -EINVAL; + }

if (vsi->type == ICE_VSI_VF && vsi->num_txq != vsi->num_rxq) { dev_dbg(ice_pf_to_dev(vsi->back), "VF VSI should have same number of Tx and Rx queues. Hence making them equal\n"); @@ -1000,6 +1011,8 @@ static void ice_vsi_setup_q_map(struct ice_vsi *vsi, struct ice_vsi_ctx *ctxt) */ ctxt->info.q_mapping[0] = cpu_to_le16(vsi->rxq_map[0]); ctxt->info.q_mapping[1] = cpu_to_le16(vsi->num_rxq); + + return 0; }

/** @@ -1187,7 +1200,10 @@ static int ice_vsi_init(struct ice_vsi *vsi, bool init_vsi) if (vsi->type == ICE_VSI_CHNL) { ice_chnl_vsi_setup_q_map(vsi, ctxt); } else { - ice_vsi_setup_q_map(vsi, ctxt); + ret = ice_vsi_setup_q_map(vsi, ctxt); + if (ret) + goto out; + if (!init_vsi) /* means VSI being updated */ /* must to indicate which section of VSI context are * being modified @@ -3464,7 +3480,7 @@ void ice_vsi_cfg_netdev_tc(struct ice_vsi *vsi, u8 ena_tc) * * Prepares VSI tc_config to have queue configurations based on MQPRIO options. */ -static void +static int ice_vsi_setup_q_map_mqprio(struct ice_vsi *vsi, struct ice_vsi_ctx *ctxt, u8 ena_tc) { @@ -3513,7 +3529,18 @@ ice_vsi_setup_q_map_mqprio(struct ice_vsi *vsi, struct ice_vsi_ctx *ctxt,

/* Set actual Tx/Rx queue pairs */ vsi->num_txq = offset + qcount_tx; + if (vsi->num_txq > vsi->alloc_txq) { + dev_err(ice_pf_to_dev(vsi->back), "Trying to use more Tx queues (%u), than were allocated (%u)!\n", + vsi->num_txq, vsi->alloc_txq); + return -EINVAL; + } + vsi->num_rxq = offset + qcount_rx; + if (vsi->num_rxq > vsi->alloc_rxq) { + dev_err(ice_pf_to_dev(vsi->back), "Trying to use more Rx queues (%u), than were allocated (%u)!\n", + vsi->num_rxq, vsi->alloc_rxq); + return -EINVAL; + }

/* Setup queue TC[0].qmap for given VSI context */ ctxt->info.tc_mapping[0] = cpu_to_le16(qmap); @@ -3531,6 +3558,8 @@ ice_vsi_setup_q_map_mqprio(struct ice_vsi *vsi, struct ice_vsi_ctx *ctxt, dev_dbg(ice_pf_to_dev(vsi->back), "vsi->num_rxq = %d\n", vsi->num_rxq); dev_dbg(ice_pf_to_dev(vsi->back), "all_numtc %u, all_enatc: 0x%04x, tc_cfg.numtc %u\n", vsi->all_numtc, vsi->all_enatc, vsi->tc_cfg.numtc); + + return 0; }

/** @@ -3580,9 +3609,12 @@ int ice_vsi_cfg_tc(struct ice_vsi *vsi, u8 ena_tc)

if (vsi->type == ICE_VSI_PF && test_bit(ICE_FLAG_TC_MQPRIO, pf->flags)) - ice_vsi_setup_q_map_mqprio(vsi, ctx, ena_tc); + ret = ice_vsi_setup_q_map_mqprio(vsi, ctx, ena_tc); else - ice_vsi_setup_q_map(vsi, ctx); + ret = ice_vsi_setup_q_map(vsi, ctx); + + if (ret) + goto out;

/* must to indicate which section of VSI context are being modified */ ctx->info.valid_sections = cpu_to_le16(ICE_AQ_VSI_PROP_RXQ_MAP_VALID);

From: Aidan MacDonald aidanmacdonald.0x0@gmail.com

[ Upstream commit 485037ae9a095491beb7f893c909a76cc4f9d1e7 ]

When enabling a type_in_mask irq, the type_buf contents must be AND'd with the mask of the IRQ we're enabling to avoid enabling other IRQs by accident, which can happen if several type_in_mask irqs share a mask register.

Fixes: bc998a730367 ("regmap: irq: handle HW using separate rising/falling edge interrupts") Signed-off-by: Aidan MacDonald aidanmacdonald.0x0@gmail.com Link: https://lore.kernel.org/r/20220620200644.1961936-2-aidanmacdonald.0x0@gmail.... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/base/regmap/regmap-irq.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/base/regmap/regmap-irq.c b/drivers/base/regmap/regmap-irq.c index 400c7412a7dc..4f785bc7981c 100644 --- a/drivers/base/regmap/regmap-irq.c +++ b/drivers/base/regmap/regmap-irq.c @@ -252,6 +252,7 @@ static void regmap_irq_enable(struct irq_data *data) struct regmap_irq_chip_data *d = irq_data_get_irq_chip_data(data); struct regmap *map = d->map; const struct regmap_irq *irq_data = irq_to_regmap_irq(d, data->hwirq); + unsigned int reg = irq_data->reg_offset / map->reg_stride; unsigned int mask, type;

type = irq_data->type.type_falling_val | irq_data->type.type_rising_val; @@ -268,14 +269,14 @@ static void regmap_irq_enable(struct irq_data *data) * at the corresponding offset in regmap_irq_set_type(). */ if (d->chip->type_in_mask && type) - mask = d->type_buf[irq_data->reg_offset / map->reg_stride]; + mask = d->type_buf[reg] & irq_data->mask; else mask = irq_data->mask;

if (d->chip->clear_on_unmask) d->clear_status = true;

- d->mask_buf[irq_data->reg_offset / map->reg_stride] &= ~mask; + d->mask_buf[reg] &= ~mask; }

static void regmap_irq_disable(struct irq_data *data)

From: Yoshihiro Shimoda yoshihiro.shimoda.uh@renesas.com

[ Upstream commit 9f7d09fe23a0112c08d2326d9116fccb5a912660 ]

Fix compatible string for R-Car Gen4.

Fixes: ae684caf465b ("iommu/ipmmu-vmsa: Add support for R-Car Gen4") Signed-off-by: Yoshihiro Shimoda yoshihiro.shimoda.uh@renesas.com Reviewed-by: Geert Uytterhoeven geert+renesas@glider.be Link: https://lore.kernel.org/r/20220617010107.3229784-1-yoshihiro.shimoda.uh@rene... Signed-off-by: Joerg Roedel jroedel@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iommu/ipmmu-vmsa.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iommu/ipmmu-vmsa.c b/drivers/iommu/ipmmu-vmsa.c index 8fdb84b3642b..1d42084d0276 100644 --- a/drivers/iommu/ipmmu-vmsa.c +++ b/drivers/iommu/ipmmu-vmsa.c @@ -987,7 +987,7 @@ static const struct of_device_id ipmmu_of_ids[] = { .compatible = "renesas,ipmmu-r8a779a0", .data = &ipmmu_features_rcar_gen4, }, { - .compatible = "renesas,rcar-gen4-ipmmu", + .compatible = "renesas,rcar-gen4-ipmmu-vmsa", .data = &ipmmu_features_rcar_gen4, }, { /* Terminator */

From: Christian Marangi ansuelsmth@gmail.com

[ Upstream commit 85467f7da18992311deafdbf32a8d163cb1e98d7 ]

The current mgmt ethernet timeout is set to 100ms. This value is too big and would slow down any mdio command in case the mgmt ethernet packet have some problems on the receiving part. Reduce it to just 5ms to handle case when some operation are done on the master port that would cause the mgmt ethernet to not work temporarily.

Fixes: 5950c7c0a68c ("net: dsa: qca8k: add support for mgmt read/write in Ethernet packet") Signed-off-by: Christian Marangi ansuelsmth@gmail.com Link: https://lore.kernel.org/r/20220621151633.11741-1-ansuelsmth@gmail.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/dsa/qca8k.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/dsa/qca8k.h b/drivers/net/dsa/qca8k.h index f375627174c8..e553e3e6fa0f 100644 --- a/drivers/net/dsa/qca8k.h +++ b/drivers/net/dsa/qca8k.h @@ -15,7 +15,7 @@

#define QCA8K_ETHERNET_MDIO_PRIORITY 7 #define QCA8K_ETHERNET_PHY_PRIORITY 6 -#define QCA8K_ETHERNET_TIMEOUT 100 +#define QCA8K_ETHERNET_TIMEOUT 5

#define QCA8K_NUM_PORTS 7 #define QCA8K_NUM_CPU_PORTS 2

From: Stephan Gerhold stephan.gerhold@kernkonzept.com

[ Upstream commit 8af52fe9fd3bf5e7478da99193c0632276e1dfce ]

The following sequence currently causes a driver bug warning when using virtio_net:

# ip link set eth0 up # echo mem > /sys/power/state (or e.g. # rtcwake -s 10 -m mem) <resume> # ip link set eth0 down

Missing register, driver bug WARNING: CPU: 0 PID: 375 at net/core/xdp.c:138 xdp_rxq_info_unreg+0x58/0x60 Call trace: xdp_rxq_info_unreg+0x58/0x60 virtnet_close+0x58/0xac __dev_close_many+0xac/0x140 __dev_change_flags+0xd8/0x210 dev_change_flags+0x24/0x64 do_setlink+0x230/0xdd0 ...

This happens because virtnet_freeze() frees the receive_queue completely (including struct xdp_rxq_info) but does not call xdp_rxq_info_unreg(). Similarly, virtnet_restore() sets up the receive_queue again but does not call xdp_rxq_info_reg().

Actually, parts of virtnet_freeze_down() and virtnet_restore_up() are almost identical to virtnet_close() and virtnet_open(): only the calls to xdp_rxq_info_(un)reg() are missing. This means that we can fix this easily and avoid such problems in the future by just calling virtnet_close()/open() from the freeze/restore handlers.

Aside from adding the missing xdp_rxq_info calls the only difference is that the refill work is only cancelled if netif_running(). However, this should not make any functional difference since the refill work should only be active if the network interface is actually up.

Fixes: 754b8a21a96d ("virtio_net: setup xdp_rxq_info") Signed-off-by: Stephan Gerhold stephan.gerhold@kernkonzept.com Acked-by: Jesper Dangaard Brouer brouer@redhat.com Acked-by: Jason Wang jasowang@redhat.com Link: https://lore.kernel.org/r/20220621114845.3650258-1-stephan.gerhold@kernkonze... Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/virtio_net.c | 25 ++++++------------------- 1 file changed, 6 insertions(+), 19 deletions(-)

diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index cbba9d2e8f32..10d548b07b9c 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -2768,7 +2768,6 @@ static const struct ethtool_ops virtnet_ethtool_ops = { static void virtnet_freeze_down(struct virtio_device *vdev) { struct virtnet_info *vi = vdev->priv; - int i;

/* Make sure no work handler is accessing the device */ flush_work(&vi->config_work); @@ -2776,14 +2775,8 @@ static void virtnet_freeze_down(struct virtio_device *vdev) netif_tx_lock_bh(vi->dev); netif_device_detach(vi->dev); netif_tx_unlock_bh(vi->dev); - cancel_delayed_work_sync(&vi->refill); - - if (netif_running(vi->dev)) { - for (i = 0; i < vi->max_queue_pairs; i++) { - napi_disable(&vi->rq[i].napi); - virtnet_napi_tx_disable(&vi->sq[i].napi); - } - } + if (netif_running(vi->dev)) + virtnet_close(vi->dev); }

static int init_vqs(struct virtnet_info *vi); @@ -2791,7 +2784,7 @@ static int init_vqs(struct virtnet_info *vi); static int virtnet_restore_up(struct virtio_device *vdev) { struct virtnet_info *vi = vdev->priv; - int err, i; + int err;

err = init_vqs(vi); if (err) @@ -2800,15 +2793,9 @@ static int virtnet_restore_up(struct virtio_device *vdev) virtio_device_ready(vdev);

if (netif_running(vi->dev)) { - for (i = 0; i < vi->curr_queue_pairs; i++) - if (!try_fill_recv(vi, &vi->rq[i], GFP_KERNEL)) - schedule_delayed_work(&vi->refill, 0); - - for (i = 0; i < vi->max_queue_pairs; i++) { - virtnet_napi_enable(vi->rq[i].vq, &vi->rq[i].napi); - virtnet_napi_tx_enable(vi, vi->sq[i].vq, - &vi->sq[i].napi); - } + err = virtnet_open(vi->dev); + if (err) + return err; }

netif_tx_lock_bh(vi->dev);

From: Jakub Kicinski kuba@kernel.org

[ Upstream commit e34a07c0ae3906f97eb18df50902e2a01c1015b6 ]

Commit 8a59f9d1e3d4 ("sock: Introduce sk->sk_prot->psock_update_sk_prot()") has moved the inet_csk_has_ulp(sk) check from sk_psock_init() to the new tcp_bpf_update_proto() function. I'm guessing that this was done to allow creating psocks for non-inet sockets.

Unfortunately the destruction path for psock includes the ULP unwind, so we need to fail the sk_psock_init() itself. Otherwise if ULP is already present we'll notice that later, and call tcp_update_ulp() with the sk_proto of the ULP itself, which will most likely result in the ULP looping its callbacks.

Fixes: 8a59f9d1e3d4 ("sock: Introduce sk->sk_prot->psock_update_sk_prot()") Signed-off-by: Jakub Kicinski kuba@kernel.org Reviewed-by: John Fastabend john.fastabend@gmail.com Reviewed-by: Jakub Sitnicki jakub@cloudflare.com Tested-by: Jakub Sitnicki jakub@cloudflare.com Link: https://lore.kernel.org/r/20220620191353.1184629-2-kuba@kernel.org Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- include/net/inet_sock.h | 5 +++++ net/core/skmsg.c | 5 +++++ net/ipv4/tcp_bpf.c | 3 --- net/tls/tls_main.c | 2 ++ 4 files changed, 12 insertions(+), 3 deletions(-)

diff --git a/include/net/inet_sock.h b/include/net/inet_sock.h index 234d70ae5f4c..48e4c59d85e2 100644 --- a/include/net/inet_sock.h +++ b/include/net/inet_sock.h @@ -252,6 +252,11 @@ struct inet_sock { #define IP_CMSG_CHECKSUM BIT(7) #define IP_CMSG_RECVFRAGSIZE BIT(8)

+static inline bool sk_is_inet(struct sock *sk) +{ + return sk->sk_family == AF_INET || sk->sk_family == AF_INET6; +} + /** * sk_to_full_sk - Access to a full socket * @sk: pointer to a socket diff --git a/net/core/skmsg.c b/net/core/skmsg.c index cc381165ea08..ede0af308f40 100644 --- a/net/core/skmsg.c +++ b/net/core/skmsg.c @@ -695,6 +695,11 @@ struct sk_psock *sk_psock_init(struct sock *sk, int node)

write_lock_bh(&sk->sk_callback_lock);

+ if (sk_is_inet(sk) && inet_csk_has_ulp(sk)) { + psock = ERR_PTR(-EINVAL); + goto out; + } + if (sk->sk_user_data) { psock = ERR_PTR(-EBUSY); goto out; diff --git a/net/ipv4/tcp_bpf.c b/net/ipv4/tcp_bpf.c index 1cdcb4df0eb7..2c597a4e429a 100644 --- a/net/ipv4/tcp_bpf.c +++ b/net/ipv4/tcp_bpf.c @@ -612,9 +612,6 @@ int tcp_bpf_update_proto(struct sock *sk, struct sk_psock *psock, bool restore) return 0; }

- if (inet_csk_has_ulp(sk)) - return -EINVAL; - if (sk->sk_family == AF_INET6) { if (tcp_bpf_assert_proto_ops(psock->sk_proto)) return -EINVAL; diff --git a/net/tls/tls_main.c b/net/tls/tls_main.c index 7b2b0e7ffee4..5c9697840ef7 100644 --- a/net/tls/tls_main.c +++ b/net/tls/tls_main.c @@ -873,6 +873,8 @@ static void tls_update(struct sock *sk, struct proto *p, { struct tls_context *ctx;

+ WARN_ON_ONCE(sk->sk_prot == p); + ctx = tls_get_ctx(sk); if (likely(ctx)) { ctx->sk_write_space = write_space;

From: Dan Carpenter dan.carpenter@oracle.com

[ Upstream commit 9ca766eaea2e87b8b773bff04ee56c055cb76d4e ]

This error path returns 1, but it should instead propagate the negative error code from winbond_sio_enter().

Fixes: a0d65009411c ("gpio: winbond: Add driver") Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Reviewed-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Signed-off-by: Bartosz Golaszewski brgl@bgdev.pl Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpio/gpio-winbond.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/gpio/gpio-winbond.c b/drivers/gpio/gpio-winbond.c index 7f8f5b02e31d..4b61d975cc0e 100644 --- a/drivers/gpio/gpio-winbond.c +++ b/drivers/gpio/gpio-winbond.c @@ -385,12 +385,13 @@ static int winbond_gpio_get(struct gpio_chip *gc, unsigned int offset) unsigned long *base = gpiochip_get_data(gc); const struct winbond_gpio_info *info; bool val; + int ret;

winbond_gpio_get_info(&offset, &info);

- val = winbond_sio_enter(*base); - if (val) - return val; + ret = winbond_sio_enter(*base); + if (ret) + return ret;

winbond_sio_select_logical(*base, info->dev);

From: Alistair Popple apopple@nvidia.com

[ Upstream commit 00fa15e0d56482e32d8ca1f51d76b0ee00afb16b ]

Commit 793917d997df ("mm/readahead: Add large folio readahead") introduced support for using large folios for filebacked pages if the filesystem supports it.

page_cache_ra_order() was introduced to allocate and add these large folios to the page cache. However adding pages to the page cache should be serialized against truncation and hole punching by taking invalidate_lock. Not doing so can lead to data races resulting in stale data getting added to the page cache and marked up-to-date. See commit 730633f0b7f9 ("mm: Protect operations adding pages to page cache with invalidate_lock") for more details.

This issue was found by inspection but a testcase revealed it was possible to observe in practice on XFS. Fix this by taking invalidate_lock in page_cache_ra_order(), to mirror what is done for the non-thp case in page_cache_ra_unbounded().

Signed-off-by: Alistair Popple apopple@nvidia.com Fixes: 793917d997df ("mm/readahead: Add large folio readahead") Reviewed-by: Jan Kara jack@suse.cz Signed-off-by: Matthew Wilcox (Oracle) willy@infradead.org Signed-off-by: Sasha Levin sashal@kernel.org --- mm/readahead.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/mm/readahead.c b/mm/readahead.c index 4a60cdb64262..38635af5bab7 100644 --- a/mm/readahead.c +++ b/mm/readahead.c @@ -508,6 +508,7 @@ void page_cache_ra_order(struct readahead_control *ractl, new_order--; }

+ filemap_invalidate_lock_shared(mapping); while (index <= limit) { unsigned int order = new_order;

@@ -534,6 +535,7 @@ void page_cache_ra_order(struct readahead_control *ractl, }

read_pages(ractl); + filemap_invalidate_unlock_shared(mapping);

/* * If there were already pages in the page cache, then we may have

From: Haibo Chen haibo.chen@nxp.com

[ Upstream commit fe18894930a025617114aa8ca0adbf94d5bffe89 ]

Correct the logic for the probe. First check of_match_table, if not meet, then check i2c_driver.id_table. If both not meet, then return fail.

Fixes: a47ac019e7e8 ("iio: mma8452: Fix probe failing when an i2c_device_id is used") Signed-off-by: Haibo Chen haibo.chen@nxp.com Link: https://lore.kernel.org/r/1650876060-17577-1-git-send-email-haibo.chen@nxp.c... Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iio/accel/mma8452.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c index 9c02c681c84c..4156d216c640 100644 --- a/drivers/iio/accel/mma8452.c +++ b/drivers/iio/accel/mma8452.c @@ -1556,11 +1556,13 @@ static int mma8452_probe(struct i2c_client *client, mutex_init(&data->lock);

data->chip_info = device_get_match_data(&client->dev); - if (!data->chip_info && id) { - data->chip_info = &mma_chip_info_table[id->driver_data]; - } else { - dev_err(&client->dev, "unknown device model\n"); - return -ENODEV; + if (!data->chip_info) { + if (id) { + data->chip_info = &mma_chip_info_table[id->driver_data]; + } else { + dev_err(&client->dev, "unknown device model\n"); + return -ENODEV; + } }

ret = iio_read_mount_matrix(&client->dev, &data->orientation);

From: Lv Ruyi lv.ruyi@zte.com.cn

[ Upstream commit f8ef475aa069cd72e9e7bdb2d60dc6a89e2bafad ]

Return irq instead of ret which always equals to zero here.

Fixes: d5c70627a794 ("iio: adc: Add Xilinx AMS driver") Reported-by: Zeal Robot zealci@zte.com.cn Signed-off-by: Lv Ruyi lv.ruyi@zte.com.cn Reviewed-by: Michal Simek michal.simek@amd.com Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iio/adc/xilinx-ams.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iio/adc/xilinx-ams.c b/drivers/iio/adc/xilinx-ams.c index a55396c1f8b2..a7687706012d 100644 --- a/drivers/iio/adc/xilinx-ams.c +++ b/drivers/iio/adc/xilinx-ams.c @@ -1409,7 +1409,7 @@ static int ams_probe(struct platform_device *pdev)

irq = platform_get_irq(pdev, 0); if (irq < 0) - return ret; + return irq;

ret = devm_request_irq(&pdev->dev, irq, &ams_irq, 0, "ams-irq", indio_dev);

From: Christoph Hellwig hch@lst.de

[ Upstream commit 58f5c8d39e0ea07fdaaea6a85c49000da83dc0cc ]

apoll_events is fed to vfs_poll and the poll tables, so it should be a __poll_t.

Signed-off-by: Christoph Hellwig hch@lst.de Link: https://lore.kernel.org/r/20220518084005.3255380-5-hch@lst.de Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- fs/io_uring.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/fs/io_uring.c b/fs/io_uring.c index ca9ed3d899e6..1070d22a1c2b 100644 --- a/fs/io_uring.c +++ b/fs/io_uring.c @@ -926,7 +926,7 @@ struct io_kiocb { /* used by request caches, completion batching and iopoll */ struct io_wq_work_node comp_list; /* cache ->apoll->events */ - int apoll_events; + __poll_t apoll_events; }; atomic_t refs; atomic_t poll_refs; @@ -5984,7 +5984,7 @@ static void io_apoll_task_func(struct io_kiocb *req, bool *locked) io_req_complete_failed(req, ret); }

-static void __io_poll_execute(struct io_kiocb *req, int mask, int events) +static void __io_poll_execute(struct io_kiocb *req, int mask, __poll_t events) { req->result = mask; /* @@ -6003,7 +6003,8 @@ static void __io_poll_execute(struct io_kiocb *req, int mask, int events) io_req_task_work_add(req, false); }

-static inline void io_poll_execute(struct io_kiocb *req, int res, int events) +static inline void io_poll_execute(struct io_kiocb *req, int res, + __poll_t events) { if (io_poll_get_ownership(req)) __io_poll_execute(req, res, events);

From: Andy Shevchenko andriy.shevchenko@linux.intel.com

[ Upstream commit 9ef165406308515dcf2e3f6e97b39a1c56d86db5 ]

Intel SoC PMIC is a generic name for all PMICs that are used on Intel platforms. In particular, INTEL_SOC_PMIC kernel configuration option refers to Crystal Cove PMIC, which has never been a part of any Intel Broxton hardware. Drop wrong dependency from Kconfig.

Note, the correct dependency is satisfied via ACPI PMIC OpRegion driver, which the Type-C depends on.

Fixes: d2061f9cc32d ("usb: typec: add driver for Intel Whiskey Cove PMIC USB Type-C PHY") Reported-by: Hans de Goede hdegoede@redhat.com Reviewed-by: Guenter Roeck linux@roeck-us.net Reviewed-by: Heikki Krogerus heikki.krogerus@linux.intel.com Reviewed-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Link: https://lore.kernel.org/r/20220620104316.57592-1-andriy.shevchenko@linux.int... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/typec/tcpm/Kconfig | 1 - 1 file changed, 1 deletion(-)

diff --git a/drivers/usb/typec/tcpm/Kconfig b/drivers/usb/typec/tcpm/Kconfig index 557f392fe24d..073fd2ea5e0b 100644 --- a/drivers/usb/typec/tcpm/Kconfig +++ b/drivers/usb/typec/tcpm/Kconfig @@ -56,7 +56,6 @@ config TYPEC_WCOVE tristate "Intel WhiskeyCove PMIC USB Type-C PHY driver" depends on ACPI depends on MFD_INTEL_PMC_BXT - depends on INTEL_SOC_PMIC depends on BXT_WC_PMIC_OPREGION help This driver adds support for USB Type-C on Intel Broxton platforms

From: Matthew Wilcox (Oracle) willy@infradead.org

[ Upstream commit 5d8de293c224896a4da99763fce4f9794308caf4 ]

Patch series "Convert vmcore to use an iov_iter", v5.

For some reason several people have been sending bad patches to fix compiler warnings in vmcore recently. Here's how it should be done. Compile-tested only on x86. As noted in the first patch, s390 should take this conversion a bit further, but I'm not inclined to do that work myself.

This patch (of 3):

Instead of passing in a 'buf' and 'userbuf' argument, pass in an iov_iter. s390 needs more work to pass the iov_iter down further, or refactor, but I'd be more comfortable if someone who can test on s390 did that work.

It's more convenient to convert the whole of read_from_oldmem() to take an iov_iter at the same time, so rename it to read_from_oldmem_iter() and add a temporary read_from_oldmem() wrapper that creates an iov_iter.

Link: https://lkml.kernel.org/r/20220408090636.560886-1-bhe@redhat.com Link: https://lkml.kernel.org/r/20220408090636.560886-2-bhe@redhat.com Signed-off-by: Matthew Wilcox (Oracle) willy@infradead.org Signed-off-by: Baoquan He bhe@redhat.com Reviewed-by: Christoph Hellwig hch@lst.de Cc: Heiko Carstens hca@linux.ibm.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/kernel/crash_dump.c | 27 +++------------- arch/arm64/kernel/crash_dump.c | 29 +++-------------- arch/ia64/kernel/crash_dump.c | 32 +++---------------- arch/mips/kernel/crash_dump.c | 27 +++------------- arch/powerpc/kernel/crash_dump.c | 35 +++------------------ arch/riscv/kernel/crash_dump.c | 26 +++------------ arch/s390/kernel/crash_dump.c | 13 +++++--- arch/sh/kernel/crash_dump.c | 29 +++-------------- arch/x86/kernel/crash_dump_32.c | 29 +++-------------- arch/x86/kernel/crash_dump_64.c | 41 +++++++----------------- fs/proc/vmcore.c | 54 ++++++++++++++++++++------------ include/linux/crash_dump.h | 9 +++--- 12 files changed, 91 insertions(+), 260 deletions(-)

diff --git a/arch/arm/kernel/crash_dump.c b/arch/arm/kernel/crash_dump.c index 53cb92435392..938bd932df9a 100644 --- a/arch/arm/kernel/crash_dump.c +++ b/arch/arm/kernel/crash_dump.c @@ -14,22 +14,10 @@ #include <linux/crash_dump.h> #include <linux/uaccess.h> #include <linux/io.h> +#include <linux/uio.h>

-/** - * copy_oldmem_page() - copy one page from old kernel memory - * @pfn: page frame number to be copied - * @buf: buffer where the copied page is placed - * @csize: number of bytes to copy - * @offset: offset in bytes into the page - * @userbuf: if set, @buf is int he user address space - * - * This function copies one page from old kernel memory into buffer pointed by - * @buf. If @buf is in userspace, set @userbuf to %1. Returns number of bytes - * copied or negative error in case of failure. - */ -ssize_t copy_oldmem_page(unsigned long pfn, char *buf, - size_t csize, unsigned long offset, - int userbuf) +ssize_t copy_oldmem_page(struct iov_iter *iter, unsigned long pfn, + size_t csize, unsigned long offset) { void *vaddr;

@@ -40,14 +28,7 @@ ssize_t copy_oldmem_page(unsigned long pfn, char *buf, if (!vaddr) return -ENOMEM;

- if (userbuf) { - if (copy_to_user(buf, vaddr + offset, csize)) { - iounmap(vaddr); - return -EFAULT; - } - } else { - memcpy(buf, vaddr + offset, csize); - } + csize = copy_to_iter(vaddr + offset, csize, iter);

iounmap(vaddr); return csize; diff --git a/arch/arm64/kernel/crash_dump.c b/arch/arm64/kernel/crash_dump.c index 58303a9ec32c..670e4ce81822 100644 --- a/arch/arm64/kernel/crash_dump.c +++ b/arch/arm64/kernel/crash_dump.c @@ -9,25 +9,11 @@ #include <linux/crash_dump.h> #include <linux/errno.h> #include <linux/io.h> -#include <linux/memblock.h> -#include <linux/uaccess.h> +#include <linux/uio.h> #include <asm/memory.h>

-/** - * copy_oldmem_page() - copy one page from old kernel memory - * @pfn: page frame number to be copied - * @buf: buffer where the copied page is placed - * @csize: number of bytes to copy - * @offset: offset in bytes into the page - * @userbuf: if set, @buf is in a user address space - * - * This function copies one page from old kernel memory into buffer pointed by - * @buf. If @buf is in userspace, set @userbuf to %1. Returns number of bytes - * copied or negative error in case of failure. - */ -ssize_t copy_oldmem_page(unsigned long pfn, char *buf, - size_t csize, unsigned long offset, - int userbuf) +ssize_t copy_oldmem_page(struct iov_iter *iter, unsigned long pfn, + size_t csize, unsigned long offset) { void *vaddr;

@@ -38,14 +24,7 @@ ssize_t copy_oldmem_page(unsigned long pfn, char *buf, if (!vaddr) return -ENOMEM;

- if (userbuf) { - if (copy_to_user((char __user *)buf, vaddr + offset, csize)) { - memunmap(vaddr); - return -EFAULT; - } - } else { - memcpy(buf, vaddr + offset, csize); - } + csize = copy_to_iter(vaddr + offset, csize, iter);

memunmap(vaddr);

diff --git a/arch/ia64/kernel/crash_dump.c b/arch/ia64/kernel/crash_dump.c index 0ed3c3dee4cd..4ef68e2aa757 100644 --- a/arch/ia64/kernel/crash_dump.c +++ b/arch/ia64/kernel/crash_dump.c @@ -10,42 +10,18 @@ #include <linux/errno.h> #include <linux/types.h> #include <linux/crash_dump.h> - +#include <linux/uio.h> #include <asm/page.h> -#include <linux/uaccess.h>

-/** - * copy_oldmem_page - copy one page from "oldmem" - * @pfn: page frame number to be copied - * @buf: target memory address for the copy; this can be in kernel address - * space or user address space (see @userbuf) - * @csize: number of bytes to copy - * @offset: offset in bytes into the page (based on pfn) to begin the copy - * @userbuf: if set, @buf is in user address space, use copy_to_user(), - * otherwise @buf is in kernel address space, use memcpy(). - * - * Copy a page from "oldmem". For this page, there is no pte mapped - * in the current kernel. We stitch up a pte, similar to kmap_atomic. - * - * Calling copy_to_user() in atomic context is not desirable. Hence first - * copying the data to a pre-allocated kernel page and then copying to user - * space in non-atomic context. - */ -ssize_t -copy_oldmem_page(unsigned long pfn, char *buf, - size_t csize, unsigned long offset, int userbuf) +ssize_t copy_oldmem_page(struct iov_iter *iter, unsigned long pfn, + size_t csize, unsigned long offset) { void *vaddr;

if (!csize) return 0; vaddr = __va(pfn<<PAGE_SHIFT); - if (userbuf) { - if (copy_to_user(buf, (vaddr + offset), csize)) { - return -EFAULT; - } - } else - memcpy(buf, (vaddr + offset), csize); + csize = copy_to_iter(vaddr + offset, csize, iter); return csize; }

diff --git a/arch/mips/kernel/crash_dump.c b/arch/mips/kernel/crash_dump.c index 2e50f55185a6..6e50f4902409 100644 --- a/arch/mips/kernel/crash_dump.c +++ b/arch/mips/kernel/crash_dump.c @@ -1,22 +1,10 @@ // SPDX-License-Identifier: GPL-2.0 #include <linux/highmem.h> #include <linux/crash_dump.h> +#include <linux/uio.h>

-/** - * copy_oldmem_page - copy one page from "oldmem" - * @pfn: page frame number to be copied - * @buf: target memory address for the copy; this can be in kernel address - * space or user address space (see @userbuf) - * @csize: number of bytes to copy - * @offset: offset in bytes into the page (based on pfn) to begin the copy - * @userbuf: if set, @buf is in user address space, use copy_to_user(), - * otherwise @buf is in kernel address space, use memcpy(). - * - * Copy a page from "oldmem". For this page, there is no pte mapped - * in the current kernel. - */ -ssize_t copy_oldmem_page(unsigned long pfn, char *buf, - size_t csize, unsigned long offset, int userbuf) +ssize_t copy_oldmem_page(struct iov_iter *iter, unsigned long pfn, + size_t csize, unsigned long offset) { void *vaddr;

@@ -24,14 +12,7 @@ ssize_t copy_oldmem_page(unsigned long pfn, char *buf, return 0;

vaddr = kmap_local_pfn(pfn); - - if (!userbuf) { - memcpy(buf, vaddr + offset, csize); - } else { - if (copy_to_user(buf, vaddr + offset, csize)) - csize = -EFAULT; - } - + csize = copy_to_iter(vaddr + offset, csize, iter); kunmap_local(vaddr);

return csize; diff --git a/arch/powerpc/kernel/crash_dump.c b/arch/powerpc/kernel/crash_dump.c index 5693e1c67c2b..32b4a97f1b79 100644 --- a/arch/powerpc/kernel/crash_dump.c +++ b/arch/powerpc/kernel/crash_dump.c @@ -16,7 +16,7 @@ #include <asm/kdump.h> #include <asm/prom.h> #include <asm/firmware.h> -#include <linux/uaccess.h> +#include <linux/uio.h> #include <asm/rtas.h> #include <asm/inst.h>

@@ -68,33 +68,8 @@ void __init setup_kdump_trampoline(void) } #endif /* CONFIG_NONSTATIC_KERNEL */

-static size_t copy_oldmem_vaddr(void *vaddr, char *buf, size_t csize, - unsigned long offset, int userbuf) -{ - if (userbuf) { - if (copy_to_user((char __user *)buf, (vaddr + offset), csize)) - return -EFAULT; - } else - memcpy(buf, (vaddr + offset), csize); - - return csize; -} - -/** - * copy_oldmem_page - copy one page from "oldmem" - * @pfn: page frame number to be copied - * @buf: target memory address for the copy; this can be in kernel address - * space or user address space (see @userbuf) - * @csize: number of bytes to copy - * @offset: offset in bytes into the page (based on pfn) to begin the copy - * @userbuf: if set, @buf is in user address space, use copy_to_user(), - * otherwise @buf is in kernel address space, use memcpy(). - * - * Copy a page from "oldmem". For this page, there is no pte mapped - * in the current kernel. We stitch up a pte, similar to kmap_atomic. - */ -ssize_t copy_oldmem_page(unsigned long pfn, char *buf, - size_t csize, unsigned long offset, int userbuf) +ssize_t copy_oldmem_page(struct iov_iter *iter, unsigned long pfn, + size_t csize, unsigned long offset) { void *vaddr; phys_addr_t paddr; @@ -107,10 +82,10 @@ ssize_t copy_oldmem_page(unsigned long pfn, char *buf,

if (memblock_is_region_memory(paddr, csize)) { vaddr = __va(paddr); - csize = copy_oldmem_vaddr(vaddr, buf, csize, offset, userbuf); + csize = copy_to_iter(vaddr + offset, csize, iter); } else { vaddr = ioremap_cache(paddr, PAGE_SIZE); - csize = copy_oldmem_vaddr(vaddr, buf, csize, offset, userbuf); + csize = copy_to_iter(vaddr + offset, csize, iter); iounmap(vaddr); }

diff --git a/arch/riscv/kernel/crash_dump.c b/arch/riscv/kernel/crash_dump.c index 86cc0ada5752..ea2158cee97b 100644 --- a/arch/riscv/kernel/crash_dump.c +++ b/arch/riscv/kernel/crash_dump.c @@ -7,22 +7,10 @@

#include <linux/crash_dump.h> #include <linux/io.h> +#include <linux/uio.h>

-/** - * copy_oldmem_page() - copy one page from old kernel memory - * @pfn: page frame number to be copied - * @buf: buffer where the copied page is placed - * @csize: number of bytes to copy - * @offset: offset in bytes into the page - * @userbuf: if set, @buf is in a user address space - * - * This function copies one page from old kernel memory into buffer pointed by - * @buf. If @buf is in userspace, set @userbuf to %1. Returns number of bytes - * copied or negative error in case of failure. - */ -ssize_t copy_oldmem_page(unsigned long pfn, char *buf, - size_t csize, unsigned long offset, - int userbuf) +ssize_t copy_oldmem_page(struct iov_iter *iter, unsigned long pfn, + size_t csize, unsigned long offset) { void *vaddr;

@@ -33,13 +21,7 @@ ssize_t copy_oldmem_page(unsigned long pfn, char *buf, if (!vaddr) return -ENOMEM;

- if (userbuf) { - if (copy_to_user((char __user *)buf, vaddr + offset, csize)) { - memunmap(vaddr); - return -EFAULT; - } - } else - memcpy(buf, vaddr + offset, csize); + csize = copy_to_iter(vaddr + offset, csize, iter);

memunmap(vaddr); return csize; diff --git a/arch/s390/kernel/crash_dump.c b/arch/s390/kernel/crash_dump.c index 69819b765250..a2c1c55daec0 100644 --- a/arch/s390/kernel/crash_dump.c +++ b/arch/s390/kernel/crash_dump.c @@ -15,6 +15,7 @@ #include <linux/slab.h> #include <linux/memblock.h> #include <linux/elf.h> +#include <linux/uio.h> #include <asm/asm-offsets.h> #include <asm/os_info.h> #include <asm/elf.h> @@ -212,8 +213,8 @@ static int copy_oldmem_user(void __user *dst, unsigned long src, size_t count) /* * Copy one page from "oldmem" */ -ssize_t copy_oldmem_page(unsigned long pfn, char *buf, size_t csize, - unsigned long offset, int userbuf) +ssize_t copy_oldmem_page(struct iov_iter *iter, unsigned long pfn, size_t csize, + unsigned long offset) { unsigned long src; int rc; @@ -221,10 +222,12 @@ ssize_t copy_oldmem_page(unsigned long pfn, char *buf, size_t csize, if (!csize) return 0; src = pfn_to_phys(pfn) + offset; - if (userbuf) - rc = copy_oldmem_user((void __force __user *) buf, src, csize); + + /* XXX: pass the iov_iter down to a common function */ + if (iter_is_iovec(iter)) + rc = copy_oldmem_user(iter->iov->iov_base, src, csize); else - rc = copy_oldmem_kernel((void *) buf, src, csize); + rc = copy_oldmem_kernel(iter->kvec->iov_base, src, csize); return rc; }

diff --git a/arch/sh/kernel/crash_dump.c b/arch/sh/kernel/crash_dump.c index 5b41b59698c1..19ce6a950aac 100644 --- a/arch/sh/kernel/crash_dump.c +++ b/arch/sh/kernel/crash_dump.c @@ -8,23 +8,11 @@ #include <linux/errno.h> #include <linux/crash_dump.h> #include <linux/io.h> +#include <linux/uio.h> #include <linux/uaccess.h>

-/** - * copy_oldmem_page - copy one page from "oldmem" - * @pfn: page frame number to be copied - * @buf: target memory address for the copy; this can be in kernel address - * space or user address space (see @userbuf) - * @csize: number of bytes to copy - * @offset: offset in bytes into the page (based on pfn) to begin the copy - * @userbuf: if set, @buf is in user address space, use copy_to_user(), - * otherwise @buf is in kernel address space, use memcpy(). - * - * Copy a page from "oldmem". For this page, there is no pte mapped - * in the current kernel. We stitch up a pte, similar to kmap_atomic. - */ -ssize_t copy_oldmem_page(unsigned long pfn, char *buf, - size_t csize, unsigned long offset, int userbuf) +ssize_t copy_oldmem_page(struct iov_iter *iter, unsigned long pfn, + size_t csize, unsigned long offset) { void __iomem *vaddr;

@@ -32,15 +20,8 @@ ssize_t copy_oldmem_page(unsigned long pfn, char *buf, return 0;

vaddr = ioremap(pfn << PAGE_SHIFT, PAGE_SIZE); - - if (userbuf) { - if (copy_to_user((void __user *)buf, (vaddr + offset), csize)) { - iounmap(vaddr); - return -EFAULT; - } - } else - memcpy(buf, (vaddr + offset), csize); - + csize = copy_to_iter(vaddr + offset, csize, iter); iounmap(vaddr); + return csize; } diff --git a/arch/x86/kernel/crash_dump_32.c b/arch/x86/kernel/crash_dump_32.c index 5fcac46aaf6b..5f4ae5476e19 100644 --- a/arch/x86/kernel/crash_dump_32.c +++ b/arch/x86/kernel/crash_dump_32.c @@ -10,8 +10,7 @@ #include <linux/errno.h> #include <linux/highmem.h> #include <linux/crash_dump.h> - -#include <linux/uaccess.h> +#include <linux/uio.h>

static inline bool is_crashed_pfn_valid(unsigned long pfn) { @@ -29,21 +28,8 @@ static inline bool is_crashed_pfn_valid(unsigned long pfn) #endif }

-/** - * copy_oldmem_page - copy one page from "oldmem" - * @pfn: page frame number to be copied - * @buf: target memory address for the copy; this can be in kernel address - * space or user address space (see @userbuf) - * @csize: number of bytes to copy - * @offset: offset in bytes into the page (based on pfn) to begin the copy - * @userbuf: if set, @buf is in user address space, use copy_to_user(), - * otherwise @buf is in kernel address space, use memcpy(). - * - * Copy a page from "oldmem". For this page, there might be no pte mapped - * in the current kernel. - */ -ssize_t copy_oldmem_page(unsigned long pfn, char *buf, size_t csize, - unsigned long offset, int userbuf) +ssize_t copy_oldmem_page(struct iov_iter *iter, unsigned long pfn, size_t csize, + unsigned long offset) { void *vaddr;

@@ -54,14 +40,7 @@ ssize_t copy_oldmem_page(unsigned long pfn, char *buf, size_t csize, return -EFAULT;

vaddr = kmap_local_pfn(pfn); - - if (!userbuf) { - memcpy(buf, vaddr + offset, csize); - } else { - if (copy_to_user(buf, vaddr + offset, csize)) - csize = -EFAULT; - } - + csize = copy_to_iter(vaddr + offset, csize, iter); kunmap_local(vaddr);

return csize; diff --git a/arch/x86/kernel/crash_dump_64.c b/arch/x86/kernel/crash_dump_64.c index 97529552dd24..94fe4aff9694 100644 --- a/arch/x86/kernel/crash_dump_64.c +++ b/arch/x86/kernel/crash_dump_64.c @@ -8,12 +8,12 @@

#include <linux/errno.h> #include <linux/crash_dump.h> -#include <linux/uaccess.h> +#include <linux/uio.h> #include <linux/io.h> #include <linux/cc_platform.h>

-static ssize_t __copy_oldmem_page(unsigned long pfn, char *buf, size_t csize, - unsigned long offset, int userbuf, +static ssize_t __copy_oldmem_page(struct iov_iter *iter, unsigned long pfn, + size_t csize, unsigned long offset, bool encrypted) { void *vaddr; @@ -29,46 +29,27 @@ static ssize_t __copy_oldmem_page(unsigned long pfn, char *buf, size_t csize, if (!vaddr) return -ENOMEM;

- if (userbuf) { - if (copy_to_user((void __user *)buf, vaddr + offset, csize)) { - iounmap((void __iomem *)vaddr); - return -EFAULT; - } - } else - memcpy(buf, vaddr + offset, csize); + csize = copy_to_iter(vaddr + offset, csize, iter);

iounmap((void __iomem *)vaddr); return csize; }

-/** - * copy_oldmem_page - copy one page of memory - * @pfn: page frame number to be copied - * @buf: target memory address for the copy; this can be in kernel address - * space or user address space (see @userbuf) - * @csize: number of bytes to copy - * @offset: offset in bytes into the page (based on pfn) to begin the copy - * @userbuf: if set, @buf is in user address space, use copy_to_user(), - * otherwise @buf is in kernel address space, use memcpy(). - * - * Copy a page from the old kernel's memory. For this page, there is no pte - * mapped in the current kernel. We stitch up a pte, similar to kmap_atomic. - */ -ssize_t copy_oldmem_page(unsigned long pfn, char *buf, size_t csize, - unsigned long offset, int userbuf) +ssize_t copy_oldmem_page(struct iov_iter *iter, unsigned long pfn, size_t csize, + unsigned long offset) { - return __copy_oldmem_page(pfn, buf, csize, offset, userbuf, false); + return __copy_oldmem_page(iter, pfn, csize, offset, false); }

-/** +/* * copy_oldmem_page_encrypted - same as copy_oldmem_page() above but ioremap the * memory with the encryption mask set to accommodate kdump on SME-enabled * machines. */ -ssize_t copy_oldmem_page_encrypted(unsigned long pfn, char *buf, size_t csize, - unsigned long offset, int userbuf) +ssize_t copy_oldmem_page_encrypted(struct iov_iter *iter, unsigned long pfn, + size_t csize, unsigned long offset) { - return __copy_oldmem_page(pfn, buf, csize, offset, userbuf, true); + return __copy_oldmem_page(iter, pfn, csize, offset, true); }

ssize_t elfcorehdr_read(char *buf, size_t count, u64 *ppos) diff --git a/fs/proc/vmcore.c b/fs/proc/vmcore.c index 6f1b8ddc6f7a..54dda2e19ed1 100644 --- a/fs/proc/vmcore.c +++ b/fs/proc/vmcore.c @@ -26,6 +26,7 @@ #include <linux/vmalloc.h> #include <linux/pagemap.h> #include <linux/uaccess.h> +#include <linux/uio.h> #include <linux/cc_platform.h> #include <asm/io.h> #include "internal.h" @@ -128,9 +129,8 @@ static int open_vmcore(struct inode *inode, struct file *file) }

/* Reads a page from the oldmem device from given offset. */ -ssize_t read_from_oldmem(char *buf, size_t count, - u64 *ppos, int userbuf, - bool encrypted) +static ssize_t read_from_oldmem_iter(struct iov_iter *iter, size_t count, + u64 *ppos, bool encrypted) { unsigned long pfn, offset; size_t nr_bytes; @@ -152,29 +152,23 @@ ssize_t read_from_oldmem(char *buf, size_t count,

/* If pfn is not ram, return zeros for sparse dump files */ if (!pfn_is_ram(pfn)) { - tmp = 0; - if (!userbuf) - memset(buf, 0, nr_bytes); - else if (clear_user(buf, nr_bytes)) - tmp = -EFAULT; + tmp = iov_iter_zero(nr_bytes, iter); } else { if (encrypted) - tmp = copy_oldmem_page_encrypted(pfn, buf, + tmp = copy_oldmem_page_encrypted(iter, pfn, nr_bytes, - offset, - userbuf); + offset); else - tmp = copy_oldmem_page(pfn, buf, nr_bytes, - offset, userbuf); + tmp = copy_oldmem_page(iter, pfn, nr_bytes, + offset); } - if (tmp < 0) { + if (tmp < nr_bytes) { srcu_read_unlock(&vmcore_cb_srcu, idx); - return tmp; + return -EFAULT; }

*ppos += nr_bytes; count -= nr_bytes; - buf += nr_bytes; read += nr_bytes; ++pfn; offset = 0; @@ -184,6 +178,27 @@ ssize_t read_from_oldmem(char *buf, size_t count, return read; }

+ssize_t read_from_oldmem(char *buf, size_t count, + u64 *ppos, int userbuf, + bool encrypted) +{ + struct iov_iter iter; + struct iovec iov; + struct kvec kvec; + + if (userbuf) { + iov.iov_base = (__force void __user *)buf; + iov.iov_len = count; + iov_iter_init(&iter, READ, &iov, 1, count); + } else { + kvec.iov_base = buf; + kvec.iov_len = count; + iov_iter_kvec(&iter, READ, &kvec, 1, count); + } + + return read_from_oldmem_iter(&iter, count, ppos, encrypted); +} + /* * Architectures may override this function to allocate ELF header in 2nd kernel */ @@ -228,11 +243,10 @@ int __weak remap_oldmem_pfn_range(struct vm_area_struct *vma, /* * Architectures which support memory encryption override this. */ -ssize_t __weak -copy_oldmem_page_encrypted(unsigned long pfn, char *buf, size_t csize, - unsigned long offset, int userbuf) +ssize_t __weak copy_oldmem_page_encrypted(struct iov_iter *iter, + unsigned long pfn, size_t csize, unsigned long offset) { - return copy_oldmem_page(pfn, buf, csize, offset, userbuf); + return copy_oldmem_page(iter, pfn, csize, offset); }

/* diff --git a/include/linux/crash_dump.h b/include/linux/crash_dump.h index 620821549b23..a1cf7d5c03c7 100644 --- a/include/linux/crash_dump.h +++ b/include/linux/crash_dump.h @@ -24,11 +24,10 @@ extern int remap_oldmem_pfn_range(struct vm_area_struct *vma, unsigned long from, unsigned long pfn, unsigned long size, pgprot_t prot);

-extern ssize_t copy_oldmem_page(unsigned long, char *, size_t, - unsigned long, int); -extern ssize_t copy_oldmem_page_encrypted(unsigned long pfn, char *buf, - size_t csize, unsigned long offset, - int userbuf); +ssize_t copy_oldmem_page(struct iov_iter *i, unsigned long pfn, size_t csize, + unsigned long offset); +ssize_t copy_oldmem_page_encrypted(struct iov_iter *iter, unsigned long pfn, + size_t csize, unsigned long offset);

void vmcore_cleanup(void);

From: Alexander Gordeev agordeev@linux.ibm.com

[ Upstream commit cc02e6e21aa5f2ac0defe8c15e5a9d024da6e73d ]

In case old memory was successfully copied the passed iterator should be advanced as well. Currently copy_oldmem_page() is always called with single-segment iterator. Should that ever change - copy_oldmem_user and copy_oldmem_kernel() functions would need a rework to deal with multi-segment iterators.

Fixes: 5d8de293c224 ("vmcore: convert copy_oldmem_page() to take an iov_iter") Reviewed-by: Alexander Egorenkov egorenar@linux.ibm.com Tested-by: Alexander Egorenkov egorenar@linux.ibm.com Signed-off-by: Alexander Gordeev agordeev@linux.ibm.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/s390/kernel/crash_dump.c | 7 +++++++ 1 file changed, 7 insertions(+)

diff --git a/arch/s390/kernel/crash_dump.c b/arch/s390/kernel/crash_dump.c index a2c1c55daec0..2534a31d2550 100644 --- a/arch/s390/kernel/crash_dump.c +++ b/arch/s390/kernel/crash_dump.c @@ -219,6 +219,11 @@ ssize_t copy_oldmem_page(struct iov_iter *iter, unsigned long pfn, size_t csize, unsigned long src; int rc;

+ if (!(iter_is_iovec(iter) || iov_iter_is_kvec(iter))) + return -EINVAL; + /* Multi-segment iterators are not supported */ + if (iter->nr_segs > 1) + return -EINVAL; if (!csize) return 0; src = pfn_to_phys(pfn) + offset; @@ -228,6 +233,8 @@ ssize_t copy_oldmem_page(struct iov_iter *iter, unsigned long pfn, size_t csize, rc = copy_oldmem_user(iter->iov->iov_base, src, csize); else rc = copy_oldmem_kernel(iter->kvec->iov_base, src, csize); + if (!rc) + iov_iter_advance(iter, csize); return rc; }

From: Mathias Nyman mathias.nyman@linux.intel.com

commit 83810f84ecf11dfc5a9414a8b762c3501b328185 upstream.

If ports are not turned off in shutdown then runtime suspended self-powered USB devices may survive in U3 link state over S5.

During subsequent boot, if firmware sends an IPC command to program the port in DISCONNECT state, it will time out, causing significant delay in the boot time.

Turning off roothub port power is also recommended in xhci specification 4.19.4 "Port Power" in the additional note.

Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman mathias.nyman@linux.intel.com Link: https://lore.kernel.org/r/20220623111945.1557702-3-mathias.nyman@linux.intel... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/host/xhci-hub.c | 2 +- drivers/usb/host/xhci.c | 15 +++++++++++++-- drivers/usb/host/xhci.h | 2 ++ 3 files changed, 16 insertions(+), 3 deletions(-)

--- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -652,7 +652,7 @@ struct xhci_hub *xhci_get_rhub(struct us * It will release and re-aquire the lock while calling ACPI * method. */ -static void xhci_set_port_power(struct xhci_hcd *xhci, struct usb_hcd *hcd, +void xhci_set_port_power(struct xhci_hcd *xhci, struct usb_hcd *hcd, u16 index, bool on, unsigned long *flags) __must_hold(&xhci->lock) { --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -779,6 +779,8 @@ static void xhci_stop(struct usb_hcd *hc void xhci_shutdown(struct usb_hcd *hcd) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); + unsigned long flags; + int i;

if (xhci->quirks & XHCI_SPURIOUS_REBOOT) usb_disable_xhci_ports(to_pci_dev(hcd->self.sysdev)); @@ -794,12 +796,21 @@ void xhci_shutdown(struct usb_hcd *hcd) del_timer_sync(&xhci->shared_hcd->rh_timer); }

- spin_lock_irq(&xhci->lock); + spin_lock_irqsave(&xhci->lock, flags); xhci_halt(xhci); + + /* Power off USB2 ports*/ + for (i = 0; i < xhci->usb2_rhub.num_ports; i++) + xhci_set_port_power(xhci, xhci->main_hcd, i, false, &flags); + + /* Power off USB3 ports*/ + for (i = 0; i < xhci->usb3_rhub.num_ports; i++) + xhci_set_port_power(xhci, xhci->shared_hcd, i, false, &flags); + /* Workaround for spurious wakeups at shutdown with HSW */ if (xhci->quirks & XHCI_SPURIOUS_WAKEUP) xhci_reset(xhci, XHCI_RESET_SHORT_USEC); - spin_unlock_irq(&xhci->lock); + spin_unlock_irqrestore(&xhci->lock, flags);

xhci_cleanup_msix(xhci);

--- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -2172,6 +2172,8 @@ int xhci_hub_control(struct usb_hcd *hcd int xhci_hub_status_data(struct usb_hcd *hcd, char *buf); int xhci_find_raw_port_number(struct usb_hcd *hcd, int port1); struct xhci_hub *xhci_get_rhub(struct usb_hcd *hcd); +void xhci_set_port_power(struct xhci_hcd *xhci, struct usb_hcd *hcd, u16 index, + bool on, unsigned long *flags);

void xhci_hc_died(struct xhci_hcd *xhci);

From: Utkarsh Patel utkarsh.h.patel@intel.com

commit 8ffdc53a60049f3930afe161dc51c67959c8d83d upstream.

Meteor Lake TCSS(Type-C Subsystem) xHCI needs to be runtime suspended whenever possible to allow the TCSS hardware block to enter D3cold and thus save energy.

Cc: stable@kernel.org Signed-off-by: Utkarsh Patel utkarsh.h.patel@intel.com Signed-off-by: Mathias Nyman mathias.nyman@linux.intel.com Link: https://lore.kernel.org/r/20220623111945.1557702-5-mathias.nyman@linux.intel... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/host/xhci-pci.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -62,6 +62,7 @@ #define PCI_DEVICE_ID_INTEL_ALDER_LAKE_N_XHCI 0x464e #define PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI 0x51ed #define PCI_DEVICE_ID_INTEL_RAPTOR_LAKE_XHCI 0xa71e +#define PCI_DEVICE_ID_INTEL_METEOR_LAKE_XHCI 0x7ec0

#define PCI_DEVICE_ID_AMD_RENOIR_XHCI 0x1639 #define PCI_DEVICE_ID_AMD_PROMONTORYA_4 0x43b9 @@ -272,7 +273,8 @@ static void xhci_pci_quirks(struct devic pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_N_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI || - pdev->device == PCI_DEVICE_ID_INTEL_RAPTOR_LAKE_XHCI)) + pdev->device == PCI_DEVICE_ID_INTEL_RAPTOR_LAKE_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_METEOR_LAKE_XHCI)) xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;

if (pdev->vendor == PCI_VENDOR_ID_ETRON &&

From: Alan Stern stern@rowland.harvard.edu

commit f2d8c2606825317b77db1f9ba0fc26ef26160b30 upstream.

In a report for a separate bug (which has already been fixed by commit 5f0b5f4d50fa "usb: gadget: fix race when gadget driver register via ioctl") in the raw-gadget driver, the syzbot console log included error messages caused by attempted registration of a new driver with the same name as an existing driver:

kobject_add_internal failed for raw-gadget with -EEXIST, don't try to register things with the same name in the same directory. UDC core: USB Raw Gadget: driver registration failed: -17 misc raw-gadget: fail, usb_gadget_register_driver returned -17

These errors arise because raw_gadget.c registers a separate UDC driver for each of the UDC instances it creates, but these drivers all have the same name: "raw-gadget". Until recently this wasn't a problem, but when the "gadget" bus was added and UDC drivers were registered on this bus, it became possible for name conflicts to cause the registrations to fail. The reason is simply that the bus code in the driver core uses the driver name as a sysfs directory name (e.g., /sys/bus/gadget/drivers/raw-gadget/), and you can't create two directories with the same pathname.

To fix this problem, the driver names used by raw-gadget are made distinct by appending a unique ID number: "raw-gadget.N", with a different value of N for each driver instance. And to avoid the proliferation of error handling code in the raw_ioctl_init() routine, the error return paths are refactored into the common pattern (goto statements leading to cleanup code at the end of the routine).

Link: https://lore.kernel.org/all/0000000000008c664105dffae2eb@google.com/ Fixes: fc274c1e9973 "USB: gadget: Add a new bus for gadgets" CC: Andrey Konovalov andreyknvl@gmail.com CC: stable@vger.kernel.org Reported-and-tested-by: syzbot+02b16343704b3af1667e@syzkaller.appspotmail.com Reviewed-by: Andrey Konovalov andreyknvl@gmail.com Acked-by: Hillf Danton hdanton@sina.com Signed-off-by: Alan Stern stern@rowland.harvard.edu Link: https://lore.kernel.org/r/YqdG32w+3h8c1s7z@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/gadget/legacy/raw_gadget.c | 62 ++++++++++++++++++++++++--------- 1 file changed, 46 insertions(+), 16 deletions(-)

--- a/drivers/usb/gadget/legacy/raw_gadget.c +++ b/drivers/usb/gadget/legacy/raw_gadget.c @@ -11,6 +11,7 @@ #include <linux/ctype.h> #include <linux/debugfs.h> #include <linux/delay.h> +#include <linux/idr.h> #include <linux/kref.h> #include <linux/miscdevice.h> #include <linux/module.h> @@ -36,6 +37,9 @@ MODULE_LICENSE("GPL");

/*----------------------------------------------------------------------*/

+static DEFINE_IDA(driver_id_numbers); +#define DRIVER_DRIVER_NAME_LENGTH_MAX 32 + #define RAW_EVENT_QUEUE_SIZE 16

struct raw_event_queue { @@ -161,6 +165,9 @@ struct raw_dev { /* Reference to misc device: */ struct device *dev;

+ /* Make driver names unique */ + int driver_id_number; + /* Protected by lock: */ enum dev_state state; bool gadget_registered; @@ -189,6 +196,7 @@ static struct raw_dev *dev_new(void) spin_lock_init(&dev->lock); init_completion(&dev->ep0_done); raw_event_queue_init(&dev->queue); + dev->driver_id_number = -1; return dev; }

@@ -199,6 +207,9 @@ static void dev_free(struct kref *kref)

kfree(dev->udc_name); kfree(dev->driver.udc_name); + kfree(dev->driver.driver.name); + if (dev->driver_id_number >= 0) + ida_free(&driver_id_numbers, dev->driver_id_number); if (dev->req) { if (dev->ep0_urb_queued) usb_ep_dequeue(dev->gadget->ep0, dev->req); @@ -422,6 +433,7 @@ static int raw_ioctl_init(struct raw_dev struct usb_raw_init arg; char *udc_driver_name; char *udc_device_name; + char *driver_driver_name; unsigned long flags;

if (copy_from_user(&arg, (void __user *)value, sizeof(arg))) @@ -440,36 +452,44 @@ static int raw_ioctl_init(struct raw_dev return -EINVAL; }

+ ret = ida_alloc(&driver_id_numbers, GFP_KERNEL); + if (ret < 0) + return ret; + dev->driver_id_number = ret; + + driver_driver_name = kmalloc(DRIVER_DRIVER_NAME_LENGTH_MAX, GFP_KERNEL); + if (!driver_driver_name) { + ret = -ENOMEM; + goto out_free_driver_id_number; + } + snprintf(driver_driver_name, DRIVER_DRIVER_NAME_LENGTH_MAX, + DRIVER_NAME ".%d", dev->driver_id_number); + udc_driver_name = kmalloc(UDC_NAME_LENGTH_MAX, GFP_KERNEL); - if (!udc_driver_name) - return -ENOMEM; + if (!udc_driver_name) { + ret = -ENOMEM; + goto out_free_driver_driver_name; + } ret = strscpy(udc_driver_name, &arg.driver_name[0], UDC_NAME_LENGTH_MAX); - if (ret < 0) { - kfree(udc_driver_name); - return ret; - } + if (ret < 0) + goto out_free_udc_driver_name; ret = 0;

udc_device_name = kmalloc(UDC_NAME_LENGTH_MAX, GFP_KERNEL); if (!udc_device_name) { - kfree(udc_driver_name); - return -ENOMEM; + ret = -ENOMEM; + goto out_free_udc_driver_name; } ret = strscpy(udc_device_name, &arg.device_name[0], UDC_NAME_LENGTH_MAX); - if (ret < 0) { - kfree(udc_driver_name); - kfree(udc_device_name); - return ret; - } + if (ret < 0) + goto out_free_udc_device_name; ret = 0;

spin_lock_irqsave(&dev->lock, flags); if (dev->state != STATE_DEV_OPENED) { dev_dbg(dev->dev, "fail, device is not opened\n"); - kfree(udc_driver_name); - kfree(udc_device_name); ret = -EINVAL; goto out_unlock; } @@ -484,14 +504,24 @@ static int raw_ioctl_init(struct raw_dev dev->driver.suspend = gadget_suspend; dev->driver.resume = gadget_resume; dev->driver.reset = gadget_reset; - dev->driver.driver.name = DRIVER_NAME; + dev->driver.driver.name = driver_driver_name; dev->driver.udc_name = udc_device_name; dev->driver.match_existing_only = 1;

dev->state = STATE_DEV_INITIALIZED; + spin_unlock_irqrestore(&dev->lock, flags); + return ret;

out_unlock: spin_unlock_irqrestore(&dev->lock, flags); +out_free_udc_device_name: + kfree(udc_device_name); +out_free_udc_driver_name: + kfree(udc_driver_name); +out_free_driver_driver_name: + kfree(driver_driver_name); +out_free_driver_id_number: + ida_free(&driver_id_numbers, dev->driver_id_number); return ret; }

From: Xu Yang xu.yang_2@nxp.com

commit b24346a240b36cfc4df194d145463874985aa29b upstream.

The complete() function may be called even though request is not completed. In this case, it's necessary to check request status so as not to set device address wrongly.

Fixes: 10775eb17bee ("usb: chipidea: udc: update gadget states according to ch9") cc: stable@vger.kernel.org Signed-off-by: Xu Yang xu.yang_2@nxp.com Link: https://lore.kernel.org/r/20220623030242.41796-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/chipidea/udc.c | 3 +++ 1 file changed, 3 insertions(+)

--- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -1048,6 +1048,9 @@ isr_setup_status_complete(struct usb_ep struct ci_hdrc *ci = req->context; unsigned long flags;

+ if (req->status < 0) + return; + if (ci->setaddr) { hw_usb_set_address(ci, ci->address); ci->setaddr = false;

From: Geert Uytterhoeven geert+renesas@glider.be

commit 9faa1c8f92f33daad9db96944139de225cefa199 upstream.

"make dtbs_check":

arch/arm/boot/dts/r8a77470-iwg23s-sbc.dtb: usb@ee080100: phys: [[17, 0], [31]] is too long From schema: Documentation/devicetree/bindings/usb/generic-ehci.yaml arch/arm/boot/dts/r8a77470-iwg23s-sbc.dtb: usb@ee0c0100: phys: [[17, 1], [33], [21, 0]] is too long From schema: Documentation/devicetree/bindings/usb/generic-ehci.yaml

Some USB EHCI controllers (e.g. on the Renesas RZ/G1C SoC) have multiple PHYs. Increase the maximum number of PHYs to 3, which is sufficient for now.

Fixes: 0499220d6dadafa5 ("dt-bindings: Add missing array size constraints") Signed-off-by: Geert Uytterhoeven geert+renesas@glider.be Link: https://lore.kernel.org/r/c5d19e2f9714f43effd90208798fc1936098078f.165530104... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- Documentation/devicetree/bindings/usb/generic-ehci.yaml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml @@ -135,7 +135,8 @@ properties: Phandle of a companion.

phys: - maxItems: 1 + minItems: 1 + maxItems: 3

phy-names: const: usb

From: Zygo Blaxell ce3g8jdj@umail.furryterror.org

commit 97e86631bccddfbbe0c13f9a9605cdef11d31296 upstream.

In 196d59ab9ccc "btrfs: switch extent buffer tree lock to rw_semaphore" the functions for tree read locking were rewritten, and in the process the read lock functions started setting eb->lock_owner = current->pid. Previously lock_owner was only set in tree write lock functions.

Read locks are shared, so they don't have exclusive ownership of the underlying object, so setting lock_owner to any single value for a read lock makes no sense. It's mostly harmless because write locks and read locks are mutually exclusive, and none of the existing code in btrfs (btrfs_init_new_buffer and print_eb_refs_lock) cares what nonsense is written in lock_owner when no writer is holding the lock.

KCSAN does care, and will complain about the data race incessantly. Remove the assignments in the read lock functions because they're useless noise.

Fixes: 196d59ab9ccc ("btrfs: switch extent buffer tree lock to rw_semaphore") CC: stable@vger.kernel.org # 5.15+ Reviewed-by: Nikolay Borisov nborisov@suse.com Reviewed-by: Filipe Manana fdmanana@suse.com Signed-off-by: Zygo Blaxell ce3g8jdj@umail.furryterror.org Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/btrfs/locking.c | 3 --- 1 file changed, 3 deletions(-)

--- a/fs/btrfs/locking.c +++ b/fs/btrfs/locking.c @@ -45,7 +45,6 @@ void __btrfs_tree_read_lock(struct exten start_ns = ktime_get_ns();

down_read_nested(&eb->lock, nest); - eb->lock_owner = current->pid; trace_btrfs_tree_read_lock(eb, start_ns); }

@@ -62,7 +61,6 @@ void btrfs_tree_read_lock(struct extent_ int btrfs_try_tree_read_lock(struct extent_buffer *eb) { if (down_read_trylock(&eb->lock)) { - eb->lock_owner = current->pid; trace_btrfs_try_tree_read_lock(eb); return 1; } @@ -90,7 +88,6 @@ int btrfs_try_tree_write_lock(struct ext void btrfs_tree_read_unlock(struct extent_buffer *eb) { trace_btrfs_tree_read_unlock(eb); - eb->lock_owner = 0; up_read(&eb->lock); }

From: Jaegeuk Kim jaegeuk@kernel.org

commit 4cde00d50707c2ef6647b9b96b2cb40b6eb24397 upstream.

This fixes the below corruption.

[345393.335389] F2FS-fs (vdb): sanity_check_inode: inode (ino=6d0, mode=33206) should not have inline_data, run fsck to fix

Cc: stable@vger.kernel.org Fixes: 677a82b44ebf ("f2fs: fix to do sanity check for inline inode") Signed-off-by: Jaegeuk Kim jaegeuk@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/f2fs/namei.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-)

--- a/fs/f2fs/namei.c +++ b/fs/f2fs/namei.c @@ -92,8 +92,6 @@ static struct inode *f2fs_new_inode(stru if (test_opt(sbi, INLINE_XATTR)) set_inode_flag(inode, FI_INLINE_XATTR);

- if (test_opt(sbi, INLINE_DATA) && f2fs_may_inline_data(inode)) - set_inode_flag(inode, FI_INLINE_DATA); if (f2fs_may_inline_dentry(inode)) set_inode_flag(inode, FI_INLINE_DENTRY);

@@ -110,10 +108,6 @@ static struct inode *f2fs_new_inode(stru

f2fs_init_extent_tree(inode, NULL);

- stat_inc_inline_xattr(inode); - stat_inc_inline_inode(inode); - stat_inc_inline_dir(inode); - F2FS_I(inode)->i_flags = f2fs_mask_flags(mode, F2FS_I(dir)->i_flags & F2FS_FL_INHERITED);

@@ -130,6 +124,14 @@ static struct inode *f2fs_new_inode(stru set_compress_context(inode); }

+ /* Should enable inline_data after compression set */ + if (test_opt(sbi, INLINE_DATA) && f2fs_may_inline_data(inode)) + set_inode_flag(inode, FI_INLINE_DATA); + + stat_inc_inline_xattr(inode); + stat_inc_inline_inode(inode); + stat_inc_inline_dir(inode); + f2fs_set_inode_flags(inode);

trace_f2fs_new_inode(inode, 0); @@ -328,6 +330,9 @@ static void set_compress_inode(struct f2 if (!is_extension_exist(name, ext[i], false)) continue;

+ /* Do not use inline_data with compression */ + stat_dec_inline_inode(inode); + clear_inode_flag(inode, FI_INLINE_DATA); set_compress_context(inode); return; }

From: Jaegeuk Kim jaegeuk@kernel.org

commit 82c7863ed95d0914f02c7c8c011200a763bc6725 upstream.

Otherwise, we can get a wrong cp_error mark.

Cc: stable@vger.kernel.org Fixes: a7b8618aa2f0 ("f2fs: avoid infinite loop to flush node pages") Signed-off-by: Jaegeuk Kim jaegeuk@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/f2fs/node.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/fs/f2fs/node.c +++ b/fs/f2fs/node.c @@ -1454,7 +1454,9 @@ page_hit: out_err: ClearPageUptodate(page); out_put_err: - f2fs_handle_page_eio(sbi, page->index, NODE); + /* ENOENT comes from read_node_page which is not an error. */ + if (err != -ENOENT) + f2fs_handle_page_eio(sbi, page->index, NODE); f2fs_put_page(page, 1); return ERR_PTR(err); }

From: Aashish Sharma shraash@google.com

commit 70171ed6dc53d2f580166d47f5b66cf51a6d0092 upstream.

0-day reports:

drivers/iio/proximity/sx9324.c:868:3: warning: Value stored to 'ret' is never read [clang-analyzer-deadcode.DeadStores]

Put an if condition to break out of switch if ret is non-zero.

Signed-off-by: Aashish Sharma shraash@google.com Fixes: a8ee3b32f5da ("iio:proximity:sx9324: Add dt_binding support") Reported-by: kernel test robot lkp@intel.com [swboyd@chromium.org: Reword commit subject, add fixes tag] Signed-off-by: Stephen Boyd swboyd@chromium.org Reviewed-by: Gwendal Grignou gwendal@chromium.org Link: https://lore.kernel.org/r/20220613232224.2466278-1-swboyd@chromium.org Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/iio/proximity/sx9324.c | 3 +++ 1 file changed, 3 insertions(+)

--- a/drivers/iio/proximity/sx9324.c +++ b/drivers/iio/proximity/sx9324.c @@ -885,6 +885,9 @@ sx9324_get_default_reg(struct device *de break; ret = device_property_read_u32_array(dev, prop, pin_defs, ARRAY_SIZE(pin_defs)); + if (ret) + break; + for (pin = 0; pin < SX9324_NUM_PINS; pin++) raw |= (pin_defs[pin] << (2 * pin)) & SX9324_REG_AFE_PH0_PIN_MASK(pin);

From: Dmitry Rokosov DDRokosov@sberdevices.ru

commit ed302925d708f2f97ae5e9fd6c56c16bb34f6629 upstream.

IIO trigger interface function iio_trigger_get() should be called after iio_trigger_register() (or its devm analogue) strictly, because of iio_trigger_get() acquires module refcnt based on the trigger->owner pointer, which is initialized inside iio_trigger_register() to THIS_MODULE. If this call order is wrong, the next iio_trigger_put() (from sysfs callback or "delete module" path) will dereference "default" module refcnt, which is incorrect behaviour.

Fixes: c1288b833881 ("iio: accel: kxcjk-1013: Increment ref counter for indio_dev->trig") Signed-off-by: Dmitry Rokosov ddrokosov@sberdevices.ru Reviewed-by: Andy Shevchenko andy.shevchenko@gmail.com Link: https://lore.kernel.org/r/20220524181150.9240-3-ddrokosov@sberdevices.ru Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/iio/accel/kxcjk-1013.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/iio/accel/kxcjk-1013.c +++ b/drivers/iio/accel/kxcjk-1013.c @@ -1554,12 +1554,12 @@ static int kxcjk1013_probe(struct i2c_cl

data->dready_trig->ops = &kxcjk1013_trigger_ops; iio_trigger_set_drvdata(data->dready_trig, indio_dev); - indio_dev->trig = data->dready_trig; - iio_trigger_get(indio_dev->trig); ret = iio_trigger_register(data->dready_trig); if (ret) goto err_poweroff;

+ indio_dev->trig = iio_trigger_get(data->dready_trig); + data->motion_trig->ops = &kxcjk1013_trigger_ops; iio_trigger_set_drvdata(data->motion_trig, indio_dev); ret = iio_trigger_register(data->motion_trig);

From: Dmitry Rokosov DDRokosov@sberdevices.ru

commit 9354c224c9b4f55847a0de3e968cba2ebf15af3b upstream.

IIO trigger interface function iio_trigger_get() should be called after iio_trigger_register() (or its devm analogue) strictly, because of iio_trigger_get() acquires module refcnt based on the trigger->owner pointer, which is initialized inside iio_trigger_register() to THIS_MODULE. If this call order is wrong, the next iio_trigger_put() (from sysfs callback or "delete module" path) will dereference "default" module refcnt, which is incorrect behaviour.

Fixes: 47196620c82f ("iio: mxc4005: add data ready trigger for mxc4005") Signed-off-by: Dmitry Rokosov ddrokosov@sberdevices.ru Reviewed-by: Andy Shevchenko andy.shevchenko@gmail.com Link: https://lore.kernel.org/r/20220524181150.9240-4-ddrokosov@sberdevices.ru Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/iio/accel/mxc4005.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/iio/accel/mxc4005.c +++ b/drivers/iio/accel/mxc4005.c @@ -456,8 +456,6 @@ static int mxc4005_probe(struct i2c_clie

data->dready_trig->ops = &mxc4005_trigger_ops; iio_trigger_set_drvdata(data->dready_trig, indio_dev); - indio_dev->trig = data->dready_trig; - iio_trigger_get(indio_dev->trig); ret = devm_iio_trigger_register(&client->dev, data->dready_trig); if (ret) { @@ -465,6 +463,8 @@ static int mxc4005_probe(struct i2c_clie "failed to register trigger\n"); return ret; } + + indio_dev->trig = iio_trigger_get(data->dready_trig); }

return devm_iio_device_register(&client->dev, indio_dev);

From: Zheyu Ma zheyuma97@gmail.com

commit b2f5ad97645e1deb5ca9bcb7090084b92cae35d2 upstream.

The driver should disable regulators when fails at regmap_update_bits().

Signed-off-by: Zheyu Ma zheyuma97@gmail.com Reviewed-by: Linus Walleij linus.walleij@linaro.org Cc: Stable@vger.kernel.org Link: https://lore.kernel.org/r/20220510092431.1711284-1-zheyuma97@gmail.com Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/iio/gyro/mpu3050-core.c | 1 + 1 file changed, 1 insertion(+)

--- a/drivers/iio/gyro/mpu3050-core.c +++ b/drivers/iio/gyro/mpu3050-core.c @@ -874,6 +874,7 @@ static int mpu3050_power_up(struct mpu30 ret = regmap_update_bits(mpu3050->map, MPU3050_PWR_MGM, MPU3050_PWR_MGM_SLEEP, 0); if (ret) { + regulator_bulk_disable(ARRAY_SIZE(mpu3050->regs), mpu3050->regs); dev_err(mpu3050->dev, "error setting power mode\n"); return ret; }

From: Olivier Moysan olivier.moysan@foss.st.com

commit 990539486e7e311fb5dab1bf4d85d1a8973ae644 upstream.

Change maximum STM32 ADC input clock rate to 36MHz, as specified in STM32MP15x datasheets.

Fixes: d58c67d1d851 ("iio: adc: stm32-adc: add support for STM32MP1") Signed-off-by: Olivier Moysan olivier.moysan@foss.st.com Reviewed-by: Fabrice Gasnier fabrice.gasnier@foss.st.com Link: https://lore.kernel.org/r/20220609095234.375925-1-olivier.moysan@foss.st.com Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/iio/adc/stm32-adc-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/iio/adc/stm32-adc-core.c +++ b/drivers/iio/adc/stm32-adc-core.c @@ -805,7 +805,7 @@ static const struct stm32_adc_priv_cfg s static const struct stm32_adc_priv_cfg stm32mp1_adc_priv_cfg = { .regs = &stm32h7_adc_common_regs, .clk_sel = stm32h7_adc_clk_sel, - .max_clk_rate_hz = 40000000, + .max_clk_rate_hz = 36000000, .has_syscfg = HAS_VBOOSTER | HAS_ANASWVDD, .num_irqs = 2, };

From: Linus Walleij linus.walleij@linaro.org

commit 9decacd8b3a432316d61c4366f302e63384cb08d upstream.

When introducing support for processed channels I needed to invert the expression:

if (!iio_channel_has_info(schan, IIO_CHAN_INFO_RAW) || !iio_channel_has_info(schan, IIO_CHAN_INFO_SCALE)) dev_err(dev, "source channel does not support raw/scale\n");

To the inverse, meaning detect when we can usse raw+scale rather than when we can not. This was the result:

if (iio_channel_has_info(schan, IIO_CHAN_INFO_RAW) || iio_channel_has_info(schan, IIO_CHAN_INFO_SCALE)) dev_info(dev, "using raw+scale source channel\n");

Ooops. Spot the error. Yep old George Boole came up and bit me. That should be an &&.

The current code "mostly works" because we have not run into systems supporting only raw but not scale or only scale but not raw, and I doubt there are few using the rescaler on anything such, but let's fix the logic.

Cc: Liam Beguin liambeguin@gmail.com Cc: stable@vger.kernel.org Fixes: 53ebee949980 ("iio: afe: iio-rescale: Support processed channels") Signed-off-by: Linus Walleij linus.walleij@linaro.org Reviewed-by: Liam Beguin liambeguin@gmail.com Acked-by: Peter Rosin peda@axentia.se Link: https://lore.kernel.org/r/20220524075448.140238-1-linus.walleij@linaro.org Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/iio/afe/iio-rescale.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/iio/afe/iio-rescale.c +++ b/drivers/iio/afe/iio-rescale.c @@ -278,7 +278,7 @@ static int rescale_configure_channel(str chan->ext_info = rescale->ext_info; chan->type = rescale->cfg->type;

- if (iio_channel_has_info(schan, IIO_CHAN_INFO_RAW) || + if (iio_channel_has_info(schan, IIO_CHAN_INFO_RAW) && iio_channel_has_info(schan, IIO_CHAN_INFO_SCALE)) { dev_info(dev, "using raw+scale source channel\n"); } else if (iio_channel_has_info(schan, IIO_CHAN_INFO_PROCESSED)) {

From: Miaoqian Lin linmq006@gmail.com

commit 8a2b6b5687984a010ed094b4f436a2f091987758 upstream.

of_find_node_by_name() returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak.

Fixes: d0a4c17b4073 ("iio: adc: aspeed: Get and set trimming data.") Signed-off-by: Miaoqian Lin linmq006@gmail.com Link: https://lore.kernel.org/r/20220516075206.34580-1-linmq006@gmail.com Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/iio/adc/aspeed_adc.c | 1 + 1 file changed, 1 insertion(+)

--- a/drivers/iio/adc/aspeed_adc.c +++ b/drivers/iio/adc/aspeed_adc.c @@ -186,6 +186,7 @@ static int aspeed_adc_set_trim_data(stru return -EOPNOTSUPP; } scu = syscon_node_to_regmap(syscon); + of_node_put(syscon); if (IS_ERR(scu)) { dev_warn(data->dev, "Failed to get syscon regmap\n"); return -EOPNOTSUPP;

From: Yannick Brosseau yannick.brosseau@gmail.com

commit 99bded02dae5e1e2312813506c41dc8db2fb656c upstream.

The check for spurious IRQs introduced in 695e2f5c289bb assumed that the bits in the control and status registers are aligned. This is true for the H7 and MP1 version, but not the F4. The interrupt was then never handled on the F4.

Instead of increasing the complexity of the comparison and check each bit specifically, we remove this check completely and rely on the generic handler for spurious IRQs.

Fixes: 695e2f5c289b ("iio: adc: stm32-adc: fix a regression when using dma and irq") Signed-off-by: Yannick Brosseau yannick.brosseau@gmail.com Reviewed-by: Fabrice Gasnier fabrice.gasnier@foss.st.com Link: https://lore.kernel.org/r/20220516203939.3498673-3-yannick.brosseau@gmail.co... Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/iio/adc/stm32-adc.c | 10 ---------- 1 file changed, 10 deletions(-)

--- a/drivers/iio/adc/stm32-adc.c +++ b/drivers/iio/adc/stm32-adc.c @@ -1407,7 +1407,6 @@ static irqreturn_t stm32_adc_threaded_is struct stm32_adc *adc = iio_priv(indio_dev); const struct stm32_adc_regspec *regs = adc->cfg->regs; u32 status = stm32_adc_readl(adc, regs->isr_eoc.reg); - u32 mask = stm32_adc_readl(adc, regs->ier_eoc.reg);

/* Check ovr status right now, as ovr mask should be already disabled */ if (status & regs->isr_ovr.mask) { @@ -1422,11 +1421,6 @@ static irqreturn_t stm32_adc_threaded_is return IRQ_HANDLED; }

- if (!(status & mask)) - dev_err_ratelimited(&indio_dev->dev, - "Unexpected IRQ: IER=0x%08x, ISR=0x%08x\n", - mask, status); - return IRQ_NONE; }

@@ -1436,10 +1430,6 @@ static irqreturn_t stm32_adc_isr(int irq struct stm32_adc *adc = iio_priv(indio_dev); const struct stm32_adc_regspec *regs = adc->cfg->regs; u32 status = stm32_adc_readl(adc, regs->isr_eoc.reg); - u32 mask = stm32_adc_readl(adc, regs->ier_eoc.reg); - - if (!(status & mask)) - return IRQ_WAKE_THREAD;

if (status & regs->isr_ovr.mask) { /*

From: Hans de Goede hdegoede@redhat.com

commit 048058399f19d43cf21de9f5d36cd8144337d004 upstream.

Since commit 9bcf15f75cac ("iio: adc: axp288: Fix TS-pin handling") we preserve the bias current set by the firmware at boot. This fixes issues we were seeing on various models.

Some models like the Nuvision Solo 10 Draw tablet actually need the old hardcoded 80ųA bias current for battery temperature monitoring to work properly.

Add a quirk entry for the Nuvision Solo 10 Draw to the DMI quirk table to restore setting the bias current to 80ųA on this model.

Fixes: 9bcf15f75cac ("iio: adc: axp288: Fix TS-pin handling") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215882 Signed-off-by: Hans de Goede hdegoede@redhat.com Link: https://lore.kernel.org/r/20220506095040.21008-1-hdegoede@redhat.com Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/iio/adc/axp288_adc.c | 8 ++++++++ 1 file changed, 8 insertions(+)

--- a/drivers/iio/adc/axp288_adc.c +++ b/drivers/iio/adc/axp288_adc.c @@ -196,6 +196,14 @@ static const struct dmi_system_id axp288 }, .driver_data = (void *)(uintptr_t)AXP288_ADC_TS_BIAS_80UA, }, + { + /* Nuvision Solo 10 Draw */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TMAX"), + DMI_MATCH(DMI_PRODUCT_NAME, "TM101W610L"), + }, + .driver_data = (void *)(uintptr_t)AXP288_ADC_TS_BIAS_80UA, + }, {} };

From: Miaoqian Lin linmq006@gmail.com

commit ada7b0c0dedafd7d059115adf49e48acba3153a8 upstream.

of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak.

Fixes: ef04070692a2 ("iio: adc: adi-axi-adc: add support for AXI ADC IP core") Signed-off-by: Miaoqian Lin linmq006@gmail.com Link: https://lore.kernel.org/r/20220524074517.45268-1-linmq006@gmail.com Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/iio/adc/adi-axi-adc.c | 3 +++ 1 file changed, 3 insertions(+)

--- a/drivers/iio/adc/adi-axi-adc.c +++ b/drivers/iio/adc/adi-axi-adc.c @@ -322,16 +322,19 @@ static struct adi_axi_adc_client *adi_ax

if (!try_module_get(cl->dev->driver->owner)) { mutex_unlock(&registered_clients_lock); + of_node_put(cln); return ERR_PTR(-ENODEV); }

get_device(cl->dev); cl->info = info; mutex_unlock(&registered_clients_lock); + of_node_put(cln); return cl; }

mutex_unlock(&registered_clients_lock); + of_node_put(cln);

return ERR_PTR(-EPROBE_DEFER); }

From: Liang He windhl@126.com

commit 173940b3ae40114d4179c251a98ee039dc9cd5b3 upstream.

In machine_setup(), of_find_compatible_node() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore.

Cc: stable@vger.kernel.org Signed-off-by: Liang He windhl@126.com Message-Id: 20220617115323.4046905-1-windhl@126.com Signed-off-by: Max Filippov jcmvbkbc@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/xtensa/platforms/xtfpga/setup.c | 1 + 1 file changed, 1 insertion(+)

--- a/arch/xtensa/platforms/xtfpga/setup.c +++ b/arch/xtensa/platforms/xtfpga/setup.c @@ -133,6 +133,7 @@ static int __init machine_setup(void)

if ((eth = of_find_compatible_node(eth, NULL, "opencores,ethoc"))) update_local_mac(eth); + of_node_put(eth); return 0; } arch_initcall(machine_setup);

From: Helge Deller deller@gmx.de