The Greybus Arche Platform driver depends on the config options USB_HSIC_USB3613 or COMPILE_TEST. USB_HSIC_USB3613 has never existed in mainline Linux, and COMPILE_TEST is intended to enable the compilation of drivers on platforms that can't support them to improve code coverage and ease testing of trivial or tree-wide changes. Therefore, it is impossible for anyone to be using this driver with unmodified mainline kernels. Remove it and move the former maintainer to the CREDITS file.
Signed-off-by: Ethan Nelson-Moore enelsonmoore@gmail.com --- Changes in v2: Clarify commit message - mention COMPILE_TEST
CREDITS | 4 + MAINTAINERS | 7 - drivers/staging/greybus/Kconfig | 9 - drivers/staging/greybus/Makefile | 6 - drivers/staging/greybus/arche-apb-ctrl.c | 490 ----------------- drivers/staging/greybus/arche-platform.c | 653 ----------------------- drivers/staging/greybus/arche_platform.h | 28 - 7 files changed, 4 insertions(+), 1193 deletions(-) delete mode 100644 drivers/staging/greybus/arche-apb-ctrl.c delete mode 100644 drivers/staging/greybus/arche-platform.c delete mode 100644 drivers/staging/greybus/arche_platform.h
diff --git a/CREDITS b/CREDITS index a0bd941ca5dd..9f74318ac0da 100644 --- a/CREDITS +++ b/CREDITS @@ -1717,6 +1717,10 @@ S: Talstr. 1 S: D - 72072 Tuebingen S: Germany
+N: Vaibhav Hiremath +E: hvaibhav.linux@gmail.com +D: Greybus Arche Platform driver + N: Richard Hirst E: richard@sleepie.demon.co.uk E: rhirst@linuxcare.com diff --git a/MAINTAINERS b/MAINTAINERS index c2414447892c..ade7c36f9318 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11315,13 +11315,6 @@ M: Bryan O'Donoghue pure.logic@nexus-software.ie S: Maintained F: drivers/staging/greybus/loopback.c
-GREYBUS PLATFORM DRIVERS -M: Vaibhav Hiremath hvaibhav.linux@gmail.com -S: Maintained -F: drivers/staging/greybus/arche-apb-ctrl.c -F: drivers/staging/greybus/arche-platform.c -F: drivers/staging/greybus/arche_platform.h - GREYBUS SDIO/GPIO/SPI PROTOCOLS DRIVERS M: Rui Miguel Silva rmfrfs@gmail.com S: Maintained diff --git a/drivers/staging/greybus/Kconfig b/drivers/staging/greybus/Kconfig index 7635f3e850fa..c25da61570eb 100644 --- a/drivers/staging/greybus/Kconfig +++ b/drivers/staging/greybus/Kconfig @@ -204,13 +204,4 @@ config GREYBUS_USB
endif # GREYBUS_BRIDGED_PHY
-config GREYBUS_ARCHE - tristate "Greybus Arche Platform driver" - depends on USB_HSIC_USB3613 || COMPILE_TEST - help - Select this option if you have an Arche device. - - To compile this code as a module, chose M here: the module - will be called gb-arche.ko - endif # GREYBUS diff --git a/drivers/staging/greybus/Makefile b/drivers/staging/greybus/Makefile index 7c5e89622334..7b9807f8a1a3 100644 --- a/drivers/staging/greybus/Makefile +++ b/drivers/staging/greybus/Makefile @@ -65,9 +65,3 @@ obj-$(CONFIG_GREYBUS_SDIO) += gb-sdio.o obj-$(CONFIG_GREYBUS_SPI) += gb-spi.o gb-spilib.o obj-$(CONFIG_GREYBUS_UART) += gb-uart.o obj-$(CONFIG_GREYBUS_USB) += gb-usb.o - - -# Greybus Platform driver -gb-arche-y := arche-platform.o arche-apb-ctrl.o - -obj-$(CONFIG_GREYBUS_ARCHE) += gb-arche.o diff --git a/drivers/staging/greybus/arche-apb-ctrl.c b/drivers/staging/greybus/arche-apb-ctrl.c deleted file mode 100644 index 4302c2226126..000000000000 --- a/drivers/staging/greybus/arche-apb-ctrl.c +++ /dev/null @@ -1,490 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Arche Platform driver to control APB. - * - * Copyright 2014-2015 Google Inc. - * Copyright 2014-2015 Linaro Ltd. - */ - -#include <linux/clk.h> -#include <linux/delay.h> -#include <linux/gpio/consumer.h> -#include <linux/interrupt.h> -#include <linux/module.h> -#include <linux/pinctrl/consumer.h> -#include <linux/platform_device.h> -#include <linux/pm.h> -#include <linux/property.h> -#include <linux/regulator/consumer.h> -#include <linux/spinlock.h> -#include "arche_platform.h" - -static void apb_bootret_deassert(struct device *dev); - -struct arche_apb_ctrl_drvdata { - /* Control GPIO signals to and from AP <=> AP Bridges */ - struct gpio_desc *resetn; - struct gpio_desc *boot_ret; - struct gpio_desc *pwroff; - struct gpio_desc *wake_in; - struct gpio_desc *wake_out; - struct gpio_desc *pwrdn; - - enum arche_platform_state state; - bool init_disabled; - - struct regulator *vcore; - struct regulator *vio; - - struct gpio_desc *clk_en; - struct clk *clk; - - struct pinctrl *pinctrl; - struct pinctrl_state *pin_default; - - /* V2: SPI Bus control */ - struct gpio_desc *spi_en; - bool spi_en_polarity_high; -}; - -/* - * Note that these low level api's are active high - */ -static inline void deassert_reset(struct gpio_desc *gpio) -{ - gpiod_set_raw_value(gpio, 1); -} - -static inline void assert_reset(struct gpio_desc *gpio) -{ - gpiod_set_raw_value(gpio, 0); -} - -/* - * Note: Please do not modify the below sequence, as it is as per the spec - */ -static int coldboot_seq(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - struct arche_apb_ctrl_drvdata *apb = platform_get_drvdata(pdev); - int ret; - - if (apb->init_disabled || - apb->state == ARCHE_PLATFORM_STATE_ACTIVE) - return 0; - - /* Hold APB in reset state */ - assert_reset(apb->resetn); - - if (apb->state == ARCHE_PLATFORM_STATE_FW_FLASHING && apb->spi_en) - devm_gpiod_put(dev, apb->spi_en); - - /* Enable power to APB */ - if (!IS_ERR(apb->vcore)) { - ret = regulator_enable(apb->vcore); - if (ret) { - dev_err(dev, "failed to enable core regulator\n"); - return ret; - } - } - - if (!IS_ERR(apb->vio)) { - ret = regulator_enable(apb->vio); - if (ret) { - dev_err(dev, "failed to enable IO regulator\n"); - return ret; - } - } - - apb_bootret_deassert(dev); - - /* On DB3 clock was not mandatory */ - if (apb->clk_en) - gpiod_set_value(apb->clk_en, 1); - - usleep_range(100, 200); - - /* deassert reset to APB : Active-low signal */ - deassert_reset(apb->resetn); - - apb->state = ARCHE_PLATFORM_STATE_ACTIVE; - - return 0; -} - -static int fw_flashing_seq(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - struct arche_apb_ctrl_drvdata *apb = platform_get_drvdata(pdev); - int ret; - - if (apb->init_disabled || - apb->state == ARCHE_PLATFORM_STATE_FW_FLASHING) - return 0; - - ret = regulator_enable(apb->vcore); - if (ret) { - dev_err(dev, "failed to enable core regulator\n"); - return ret; - } - - ret = regulator_enable(apb->vio); - if (ret) { - dev_err(dev, "failed to enable IO regulator\n"); - return ret; - } - - if (apb->spi_en) { - unsigned long flags; - - if (apb->spi_en_polarity_high) - flags = GPIOD_OUT_HIGH; - else - flags = GPIOD_OUT_LOW; - - apb->spi_en = devm_gpiod_get(dev, "spi-en", flags); - if (IS_ERR(apb->spi_en)) { - ret = PTR_ERR(apb->spi_en); - dev_err(dev, "Failed requesting SPI bus en GPIO: %d\n", - ret); - return ret; - } - } - - /* for flashing device should be in reset state */ - assert_reset(apb->resetn); - apb->state = ARCHE_PLATFORM_STATE_FW_FLASHING; - - return 0; -} - -static int standby_boot_seq(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - struct arche_apb_ctrl_drvdata *apb = platform_get_drvdata(pdev); - - if (apb->init_disabled) - return 0; - - /* - * Even if it is in OFF state, - * then we do not want to change the state - */ - if (apb->state == ARCHE_PLATFORM_STATE_STANDBY || - apb->state == ARCHE_PLATFORM_STATE_OFF) - return 0; - - if (apb->state == ARCHE_PLATFORM_STATE_FW_FLASHING && apb->spi_en) - devm_gpiod_put(dev, apb->spi_en); - - /* - * As per WDM spec, do nothing - * - * Pasted from WDM spec, - * - A falling edge on POWEROFF_L is detected (a) - * - WDM enters standby mode, but no output signals are changed - */ - - /* TODO: POWEROFF_L is input to WDM module */ - apb->state = ARCHE_PLATFORM_STATE_STANDBY; - return 0; -} - -static void poweroff_seq(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - struct arche_apb_ctrl_drvdata *apb = platform_get_drvdata(pdev); - - if (apb->init_disabled || apb->state == ARCHE_PLATFORM_STATE_OFF) - return; - - if (apb->state == ARCHE_PLATFORM_STATE_FW_FLASHING && apb->spi_en) - devm_gpiod_put(dev, apb->spi_en); - - /* disable the clock */ - if (apb->clk_en) - gpiod_set_value(apb->clk_en, 0); - - if (!IS_ERR(apb->vcore) && regulator_is_enabled(apb->vcore) > 0) - regulator_disable(apb->vcore); - - if (!IS_ERR(apb->vio) && regulator_is_enabled(apb->vio) > 0) - regulator_disable(apb->vio); - - /* As part of exit, put APB back in reset state */ - assert_reset(apb->resetn); - apb->state = ARCHE_PLATFORM_STATE_OFF; - - /* TODO: May have to send an event to SVC about this exit */ -} - -static void apb_bootret_deassert(struct device *dev) -{ - struct arche_apb_ctrl_drvdata *apb = dev_get_drvdata(dev); - - gpiod_set_value(apb->boot_ret, 0); -} - -int apb_ctrl_coldboot(struct device *dev) -{ - return coldboot_seq(to_platform_device(dev)); -} - -int apb_ctrl_fw_flashing(struct device *dev) -{ - return fw_flashing_seq(to_platform_device(dev)); -} - -int apb_ctrl_standby_boot(struct device *dev) -{ - return standby_boot_seq(to_platform_device(dev)); -} - -void apb_ctrl_poweroff(struct device *dev) -{ - poweroff_seq(to_platform_device(dev)); -} - -static ssize_t state_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct platform_device *pdev = to_platform_device(dev); - struct arche_apb_ctrl_drvdata *apb = platform_get_drvdata(pdev); - int ret = 0; - bool is_disabled; - - if (sysfs_streq(buf, "off")) { - if (apb->state == ARCHE_PLATFORM_STATE_OFF) - return count; - - poweroff_seq(pdev); - } else if (sysfs_streq(buf, "active")) { - if (apb->state == ARCHE_PLATFORM_STATE_ACTIVE) - return count; - - poweroff_seq(pdev); - is_disabled = apb->init_disabled; - apb->init_disabled = false; - ret = coldboot_seq(pdev); - if (ret) - apb->init_disabled = is_disabled; - } else if (sysfs_streq(buf, "standby")) { - if (apb->state == ARCHE_PLATFORM_STATE_STANDBY) - return count; - - ret = standby_boot_seq(pdev); - } else if (sysfs_streq(buf, "fw_flashing")) { - if (apb->state == ARCHE_PLATFORM_STATE_FW_FLASHING) - return count; - - /* - * First we want to make sure we power off everything - * and then enter FW flashing state - */ - poweroff_seq(pdev); - ret = fw_flashing_seq(pdev); - } else { - dev_err(dev, "unknown state\n"); - ret = -EINVAL; - } - - return ret ? ret : count; -} - -static ssize_t state_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct arche_apb_ctrl_drvdata *apb = dev_get_drvdata(dev); - - switch (apb->state) { - case ARCHE_PLATFORM_STATE_OFF: - return sysfs_emit(buf, "off%s\n", - apb->init_disabled ? ",disabled" : ""); - case ARCHE_PLATFORM_STATE_ACTIVE: - return sysfs_emit(buf, "active\n"); - case ARCHE_PLATFORM_STATE_STANDBY: - return sysfs_emit(buf, "standby\n"); - case ARCHE_PLATFORM_STATE_FW_FLASHING: - return sysfs_emit(buf, "fw_flashing\n"); - default: - return sysfs_emit(buf, "unknown state\n"); - } -} - -static DEVICE_ATTR_RW(state); - -static int apb_ctrl_get_fw_data(struct platform_device *pdev, - struct arche_apb_ctrl_drvdata *apb) -{ - struct device *dev = &pdev->dev; - int ret; - - apb->resetn = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); - if (IS_ERR(apb->resetn)) { - ret = PTR_ERR(apb->resetn); - dev_err(dev, "Failed requesting reset GPIO: %d\n", ret); - return ret; - } - - apb->boot_ret = devm_gpiod_get(dev, "boot-ret", GPIOD_OUT_LOW); - if (IS_ERR(apb->boot_ret)) { - ret = PTR_ERR(apb->boot_ret); - dev_err(dev, "Failed requesting bootret GPIO: %d\n", ret); - return ret; - } - - /* It's not mandatory to support power management interface */ - apb->pwroff = devm_gpiod_get_optional(dev, "pwr-off", GPIOD_IN); - if (IS_ERR(apb->pwroff)) { - ret = PTR_ERR(apb->pwroff); - dev_err(dev, "Failed requesting pwroff_n GPIO: %d\n", ret); - return ret; - } - - /* Do not make clock mandatory as of now (for DB3) */ - apb->clk_en = devm_gpiod_get_optional(dev, "clock-en", GPIOD_OUT_LOW); - if (IS_ERR(apb->clk_en)) { - ret = PTR_ERR(apb->clk_en); - dev_err(dev, "Failed requesting APB clock en GPIO: %d\n", ret); - return ret; - } - - apb->pwrdn = devm_gpiod_get(dev, "pwr-down", GPIOD_OUT_LOW); - if (IS_ERR(apb->pwrdn)) { - ret = PTR_ERR(apb->pwrdn); - dev_warn(dev, "Failed requesting power down GPIO: %d\n", ret); - return ret; - } - - /* Regulators are optional, as we may have fixed supply coming in */ - apb->vcore = devm_regulator_get(dev, "vcore"); - if (IS_ERR(apb->vcore)) - dev_warn(dev, "no core regulator found\n"); - - apb->vio = devm_regulator_get(dev, "vio"); - if (IS_ERR(apb->vio)) - dev_warn(dev, "no IO regulator found\n"); - - apb->pinctrl = devm_pinctrl_get(&pdev->dev); - if (IS_ERR(apb->pinctrl)) { - dev_err(&pdev->dev, "could not get pinctrl handle\n"); - return PTR_ERR(apb->pinctrl); - } - apb->pin_default = pinctrl_lookup_state(apb->pinctrl, "default"); - if (IS_ERR(apb->pin_default)) { - dev_err(&pdev->dev, "could not get default pin state\n"); - return PTR_ERR(apb->pin_default); - } - - /* Only applicable for platform >= V2 */ - if (device_property_read_bool(&pdev->dev, "gb,spi-en-active-high")) - apb->spi_en_polarity_high = true; - - return 0; -} - -static int arche_apb_ctrl_probe(struct platform_device *pdev) -{ - int ret; - struct arche_apb_ctrl_drvdata *apb; - struct device *dev = &pdev->dev; - - apb = devm_kzalloc(&pdev->dev, sizeof(*apb), GFP_KERNEL); - if (!apb) - return -ENOMEM; - - ret = apb_ctrl_get_fw_data(pdev, apb); - if (ret) { - dev_err(dev, "failed to get apb devicetree data %d\n", ret); - return ret; - } - - /* Initially set APB to OFF state */ - apb->state = ARCHE_PLATFORM_STATE_OFF; - /* Check whether device needs to be enabled on boot */ - if (device_property_read_bool(&pdev->dev, "arche,init-disable")) - apb->init_disabled = true; - - platform_set_drvdata(pdev, apb); - - /* Create sysfs interface to allow user to change state dynamically */ - ret = device_create_file(dev, &dev_attr_state); - if (ret) { - dev_err(dev, "failed to create state file in sysfs\n"); - return ret; - } - - dev_info(&pdev->dev, "Device registered successfully\n"); - return 0; -} - -static void arche_apb_ctrl_remove(struct platform_device *pdev) -{ - device_remove_file(&pdev->dev, &dev_attr_state); - poweroff_seq(pdev); - platform_set_drvdata(pdev, NULL); -} - -static int __maybe_unused arche_apb_ctrl_suspend(struct device *dev) -{ - /* - * If timing profile permits, we may shutdown bridge - * completely - * - * TODO: sequence ?? - * - * Also, need to make sure we meet precondition for unipro suspend - * Precondition: Definition ??? - */ - return 0; -} - -static int __maybe_unused arche_apb_ctrl_resume(struct device *dev) -{ - /* - * At least for ES2 we have to meet the delay requirement between - * unipro switch and AP bridge init, depending on whether bridge is in - * OFF state or standby state. - * - * Based on whether bridge is in standby or OFF state we may have to - * assert multiple signals. Please refer to WDM spec, for more info. - * - */ - return 0; -} - -static void arche_apb_ctrl_shutdown(struct platform_device *pdev) -{ - apb_ctrl_poweroff(&pdev->dev); -} - -static SIMPLE_DEV_PM_OPS(arche_apb_ctrl_pm_ops, arche_apb_ctrl_suspend, - arche_apb_ctrl_resume); - -static const struct of_device_id arche_apb_ctrl_of_match[] = { - { .compatible = "usbffff,2", }, - { }, -}; -MODULE_DEVICE_TABLE(of, arche_apb_ctrl_of_match); - -static struct platform_driver arche_apb_ctrl_device_driver = { - .probe = arche_apb_ctrl_probe, - .remove = arche_apb_ctrl_remove, - .shutdown = arche_apb_ctrl_shutdown, - .driver = { - .name = "arche-apb-ctrl", - .pm = &arche_apb_ctrl_pm_ops, - .of_match_table = arche_apb_ctrl_of_match, - } -}; - -int __init arche_apb_init(void) -{ - return platform_driver_register(&arche_apb_ctrl_device_driver); -} - -void __exit arche_apb_exit(void) -{ - platform_driver_unregister(&arche_apb_ctrl_device_driver); -} diff --git a/drivers/staging/greybus/arche-platform.c b/drivers/staging/greybus/arche-platform.c deleted file mode 100644 index de5de59ea8ab..000000000000 --- a/drivers/staging/greybus/arche-platform.c +++ /dev/null @@ -1,653 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Arche Platform driver to enable Unipro link. - * - * Copyright 2014-2015 Google Inc. - * Copyright 2014-2015 Linaro Ltd. - */ - -#include <linux/clk.h> -#include <linux/delay.h> -#include <linux/gpio/consumer.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/of_platform.h> -#include <linux/pinctrl/consumer.h> -#include <linux/platform_device.h> -#include <linux/pm.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/suspend.h> -#include <linux/time.h> -#include <linux/greybus.h> -#include <linux/of.h> -#include "arche_platform.h" - -#if IS_ENABLED(CONFIG_USB_HSIC_USB3613) -#include <linux/usb/usb3613.h> -#else -static inline int usb3613_hub_mode_ctrl(bool unused) -{ - return 0; -} -#endif - -#define WD_COLDBOOT_PULSE_WIDTH_MS 30 - -enum svc_wakedetect_state { - WD_STATE_IDLE, /* Default state = pulled high/low */ - WD_STATE_BOOT_INIT, /* WD = falling edge (low) */ - WD_STATE_COLDBOOT_TRIG, /* WD = rising edge (high), > 30msec */ - WD_STATE_STANDBYBOOT_TRIG, /* As of now not used ?? */ - WD_STATE_COLDBOOT_START, /* Cold boot process started */ - WD_STATE_STANDBYBOOT_START, /* Not used */ -}; - -struct arche_platform_drvdata { - /* Control GPIO signals to and from AP <=> SVC */ - struct gpio_desc *svc_reset; - bool is_reset_act_hi; - struct gpio_desc *svc_sysboot; - struct gpio_desc *wake_detect; /* bi-dir,maps to WAKE_MOD & WAKE_FRAME signals */ - - enum arche_platform_state state; - - struct gpio_desc *svc_refclk_req; - struct clk *svc_ref_clk; - - struct pinctrl *pinctrl; - struct pinctrl_state *pin_default; - - int num_apbs; - - enum svc_wakedetect_state wake_detect_state; - int wake_detect_irq; - spinlock_t wake_lock; /* Protect wake_detect_state */ - struct mutex platform_state_mutex; /* Protect state */ - unsigned long wake_detect_start; - struct notifier_block pm_notifier; - - struct device *dev; -}; - -/* Requires calling context to hold arche_pdata->platform_state_mutex */ -static void arche_platform_set_state(struct arche_platform_drvdata *arche_pdata, - enum arche_platform_state state) -{ - arche_pdata->state = state; -} - -/* Requires arche_pdata->wake_lock is held by calling context */ -static void arche_platform_set_wake_detect_state(struct arche_platform_drvdata *arche_pdata, - enum svc_wakedetect_state state) -{ - arche_pdata->wake_detect_state = state; -} - -static inline void svc_reset_onoff(struct gpio_desc *gpio, bool onoff) -{ - gpiod_set_raw_value(gpio, onoff); -} - -static int apb_cold_boot(struct device *dev, void *data) -{ - int ret; - - ret = apb_ctrl_coldboot(dev); - if (ret) - dev_warn(dev, "failed to coldboot\n"); - - /*Child nodes are independent, so do not exit coldboot operation */ - return 0; -} - -static int apb_poweroff(struct device *dev, void *data) -{ - apb_ctrl_poweroff(dev); - - /* Enable HUB3613 into HUB mode. */ - if (usb3613_hub_mode_ctrl(false)) - dev_warn(dev, "failed to control hub device\n"); - - return 0; -} - -static void arche_platform_wd_irq_en(struct arche_platform_drvdata *arche_pdata) -{ - /* Enable interrupt here, to read event back from SVC */ - enable_irq(arche_pdata->wake_detect_irq); -} - -static irqreturn_t arche_platform_wd_irq_thread(int irq, void *devid) -{ - struct arche_platform_drvdata *arche_pdata = devid; - unsigned long flags; - - spin_lock_irqsave(&arche_pdata->wake_lock, flags); - if (arche_pdata->wake_detect_state != WD_STATE_COLDBOOT_TRIG) { - /* Something is wrong */ - spin_unlock_irqrestore(&arche_pdata->wake_lock, flags); - return IRQ_HANDLED; - } - - arche_platform_set_wake_detect_state(arche_pdata, - WD_STATE_COLDBOOT_START); - spin_unlock_irqrestore(&arche_pdata->wake_lock, flags); - - /* It should complete power cycle, so first make sure it is poweroff */ - device_for_each_child(arche_pdata->dev, NULL, apb_poweroff); - - /* Bring APB out of reset: cold boot sequence */ - device_for_each_child(arche_pdata->dev, NULL, apb_cold_boot); - - /* Enable HUB3613 into HUB mode. */ - if (usb3613_hub_mode_ctrl(true)) - dev_warn(arche_pdata->dev, "failed to control hub device\n"); - - spin_lock_irqsave(&arche_pdata->wake_lock, flags); - arche_platform_set_wake_detect_state(arche_pdata, WD_STATE_IDLE); - spin_unlock_irqrestore(&arche_pdata->wake_lock, flags); - - return IRQ_HANDLED; -} - -static irqreturn_t arche_platform_wd_irq(int irq, void *devid) -{ - struct arche_platform_drvdata *arche_pdata = devid; - unsigned long flags; - - spin_lock_irqsave(&arche_pdata->wake_lock, flags); - - if (gpiod_get_value(arche_pdata->wake_detect)) { - /* wake/detect rising */ - - /* - * If wake/detect line goes high after low, within less than - * 30msec, then standby boot sequence is initiated, which is not - * supported/implemented as of now. So ignore it. - */ - if (arche_pdata->wake_detect_state == WD_STATE_BOOT_INIT) { - if (time_before(jiffies, - arche_pdata->wake_detect_start + - msecs_to_jiffies(WD_COLDBOOT_PULSE_WIDTH_MS))) { - arche_platform_set_wake_detect_state(arche_pdata, - WD_STATE_IDLE); - } else { - /* - * Check we are not in middle of irq thread - * already - */ - if (arche_pdata->wake_detect_state != - WD_STATE_COLDBOOT_START) { - arche_platform_set_wake_detect_state(arche_pdata, - WD_STATE_COLDBOOT_TRIG); - spin_unlock_irqrestore(&arche_pdata->wake_lock, - flags); - return IRQ_WAKE_THREAD; - } - } - } - } else { - /* wake/detect falling */ - if (arche_pdata->wake_detect_state == WD_STATE_IDLE) { - arche_pdata->wake_detect_start = jiffies; - /* - * In the beginning, when wake/detect goes low - * (first time), we assume it is meant for coldboot - * and set the flag. If wake/detect line stays low - * beyond 30msec, then it is coldboot else fallback - * to standby boot. - */ - arche_platform_set_wake_detect_state(arche_pdata, - WD_STATE_BOOT_INIT); - } - } - - spin_unlock_irqrestore(&arche_pdata->wake_lock, flags); - - return IRQ_HANDLED; -} - -/* - * Requires arche_pdata->platform_state_mutex to be held - */ -static int -arche_platform_coldboot_seq(struct arche_platform_drvdata *arche_pdata) -{ - int ret; - - if (arche_pdata->state == ARCHE_PLATFORM_STATE_ACTIVE) - return 0; - - dev_info(arche_pdata->dev, "Booting from cold boot state\n"); - - svc_reset_onoff(arche_pdata->svc_reset, arche_pdata->is_reset_act_hi); - - gpiod_set_value(arche_pdata->svc_sysboot, 0); - usleep_range(100, 200); - - ret = clk_prepare_enable(arche_pdata->svc_ref_clk); - if (ret) { - dev_err(arche_pdata->dev, "failed to enable svc_ref_clk: %d\n", - ret); - return ret; - } - - /* bring SVC out of reset */ - svc_reset_onoff(arche_pdata->svc_reset, !arche_pdata->is_reset_act_hi); - - arche_platform_set_state(arche_pdata, ARCHE_PLATFORM_STATE_ACTIVE); - - return 0; -} - -/* - * Requires arche_pdata->platform_state_mutex to be held - */ -static int -arche_platform_fw_flashing_seq(struct arche_platform_drvdata *arche_pdata) -{ - int ret; - - if (arche_pdata->state == ARCHE_PLATFORM_STATE_FW_FLASHING) - return 0; - - dev_info(arche_pdata->dev, "Switching to FW flashing state\n"); - - svc_reset_onoff(arche_pdata->svc_reset, arche_pdata->is_reset_act_hi); - - gpiod_set_value(arche_pdata->svc_sysboot, 1); - - usleep_range(100, 200); - - ret = clk_prepare_enable(arche_pdata->svc_ref_clk); - if (ret) { - dev_err(arche_pdata->dev, "failed to enable svc_ref_clk: %d\n", - ret); - return ret; - } - - svc_reset_onoff(arche_pdata->svc_reset, !arche_pdata->is_reset_act_hi); - - arche_platform_set_state(arche_pdata, ARCHE_PLATFORM_STATE_FW_FLASHING); - - return 0; -} - -/* - * Requires arche_pdata->platform_state_mutex to be held - */ -static void -arche_platform_poweroff_seq(struct arche_platform_drvdata *arche_pdata) -{ - unsigned long flags; - - if (arche_pdata->state == ARCHE_PLATFORM_STATE_OFF) - return; - - /* If in fw_flashing mode, then no need to repeate things again */ - if (arche_pdata->state != ARCHE_PLATFORM_STATE_FW_FLASHING) { - disable_irq(arche_pdata->wake_detect_irq); - - spin_lock_irqsave(&arche_pdata->wake_lock, flags); - arche_platform_set_wake_detect_state(arche_pdata, - WD_STATE_IDLE); - spin_unlock_irqrestore(&arche_pdata->wake_lock, flags); - } - - clk_disable_unprepare(arche_pdata->svc_ref_clk); - - /* As part of exit, put APB back in reset state */ - svc_reset_onoff(arche_pdata->svc_reset, arche_pdata->is_reset_act_hi); - - arche_platform_set_state(arche_pdata, ARCHE_PLATFORM_STATE_OFF); -} - -static ssize_t state_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct arche_platform_drvdata *arche_pdata = dev_get_drvdata(dev); - int ret = 0; - - mutex_lock(&arche_pdata->platform_state_mutex); - - if (sysfs_streq(buf, "off")) { - if (arche_pdata->state == ARCHE_PLATFORM_STATE_OFF) - goto exit; - - /* If SVC goes down, bring down APB's as well */ - device_for_each_child(arche_pdata->dev, NULL, apb_poweroff); - - arche_platform_poweroff_seq(arche_pdata); - - } else if (sysfs_streq(buf, "active")) { - if (arche_pdata->state == ARCHE_PLATFORM_STATE_ACTIVE) - goto exit; - - /* First we want to make sure we power off everything - * and then activate back again - */ - device_for_each_child(arche_pdata->dev, NULL, apb_poweroff); - arche_platform_poweroff_seq(arche_pdata); - - arche_platform_wd_irq_en(arche_pdata); - ret = arche_platform_coldboot_seq(arche_pdata); - if (ret) - goto exit; - - } else if (sysfs_streq(buf, "standby")) { - if (arche_pdata->state == ARCHE_PLATFORM_STATE_STANDBY) - goto exit; - - dev_warn(arche_pdata->dev, "standby state not supported\n"); - } else if (sysfs_streq(buf, "fw_flashing")) { - if (arche_pdata->state == ARCHE_PLATFORM_STATE_FW_FLASHING) - goto exit; - - /* - * Here we only control SVC. - * - * In case of FW_FLASHING mode we do not want to control - * APBs, as in case of V2, SPI bus is shared between both - * the APBs. So let user chose which APB he wants to flash. - */ - arche_platform_poweroff_seq(arche_pdata); - - ret = arche_platform_fw_flashing_seq(arche_pdata); - if (ret) - goto exit; - } else { - dev_err(arche_pdata->dev, "unknown state\n"); - ret = -EINVAL; - } - -exit: - mutex_unlock(&arche_pdata->platform_state_mutex); - return ret ? ret : count; -} - -static ssize_t state_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct arche_platform_drvdata *arche_pdata = dev_get_drvdata(dev); - - switch (arche_pdata->state) { - case ARCHE_PLATFORM_STATE_OFF: - return sysfs_emit(buf, "off\n"); - case ARCHE_PLATFORM_STATE_ACTIVE: - return sysfs_emit(buf, "active\n"); - case ARCHE_PLATFORM_STATE_STANDBY: - return sysfs_emit(buf, "standby\n"); - case ARCHE_PLATFORM_STATE_FW_FLASHING: - return sysfs_emit(buf, "fw_flashing\n"); - default: - return sysfs_emit(buf, "unknown state\n"); - } -} - -static DEVICE_ATTR_RW(state); - -static int arche_platform_pm_notifier(struct notifier_block *notifier, - unsigned long pm_event, void *unused) -{ - struct arche_platform_drvdata *arche_pdata = - container_of(notifier, struct arche_platform_drvdata, - pm_notifier); - int ret = NOTIFY_DONE; - - mutex_lock(&arche_pdata->platform_state_mutex); - switch (pm_event) { - case PM_SUSPEND_PREPARE: - if (arche_pdata->state != ARCHE_PLATFORM_STATE_ACTIVE) { - ret = NOTIFY_STOP; - break; - } - device_for_each_child(arche_pdata->dev, NULL, apb_poweroff); - arche_platform_poweroff_seq(arche_pdata); - break; - case PM_POST_SUSPEND: - if (arche_pdata->state != ARCHE_PLATFORM_STATE_OFF) - break; - - arche_platform_wd_irq_en(arche_pdata); - arche_platform_coldboot_seq(arche_pdata); - break; - default: - break; - } - mutex_unlock(&arche_pdata->platform_state_mutex); - - return ret; -} - -static int arche_platform_probe(struct platform_device *pdev) -{ - struct arche_platform_drvdata *arche_pdata; - struct device *dev = &pdev->dev; - struct device_node *np = dev->of_node; - int ret; - unsigned int flags; - - arche_pdata = devm_kzalloc(&pdev->dev, sizeof(*arche_pdata), - GFP_KERNEL); - if (!arche_pdata) - return -ENOMEM; - - /* setup svc reset gpio */ - arche_pdata->is_reset_act_hi = of_property_read_bool(np, - "svc,reset-active-high"); - if (arche_pdata->is_reset_act_hi) - flags = GPIOD_OUT_HIGH; - else - flags = GPIOD_OUT_LOW; - - arche_pdata->svc_reset = devm_gpiod_get(dev, "svc,reset", flags); - if (IS_ERR(arche_pdata->svc_reset)) { - ret = PTR_ERR(arche_pdata->svc_reset); - dev_err(dev, "failed to request svc-reset GPIO: %d\n", ret); - return ret; - } - arche_platform_set_state(arche_pdata, ARCHE_PLATFORM_STATE_OFF); - - arche_pdata->svc_sysboot = devm_gpiod_get(dev, "svc,sysboot", - GPIOD_OUT_LOW); - if (IS_ERR(arche_pdata->svc_sysboot)) { - ret = PTR_ERR(arche_pdata->svc_sysboot); - dev_err(dev, "failed to request sysboot0 GPIO: %d\n", ret); - return ret; - } - - /* setup the clock request gpio first */ - arche_pdata->svc_refclk_req = devm_gpiod_get(dev, "svc,refclk-req", - GPIOD_IN); - if (IS_ERR(arche_pdata->svc_refclk_req)) { - ret = PTR_ERR(arche_pdata->svc_refclk_req); - dev_err(dev, "failed to request svc-clk-req GPIO: %d\n", ret); - return ret; - } - - /* setup refclk2 to follow the pin */ - arche_pdata->svc_ref_clk = devm_clk_get(dev, "svc_ref_clk"); - if (IS_ERR(arche_pdata->svc_ref_clk)) { - ret = PTR_ERR(arche_pdata->svc_ref_clk); - dev_err(dev, "failed to get svc_ref_clk: %d\n", ret); - return ret; - } - - platform_set_drvdata(pdev, arche_pdata); - - arche_pdata->num_apbs = of_get_child_count(np); - dev_dbg(dev, "Number of APB's available - %d\n", arche_pdata->num_apbs); - - arche_pdata->wake_detect = devm_gpiod_get(dev, "svc,wake-detect", - GPIOD_IN); - if (IS_ERR(arche_pdata->wake_detect)) { - ret = PTR_ERR(arche_pdata->wake_detect); - dev_err(dev, "Failed requesting wake_detect GPIO: %d\n", ret); - return ret; - } - - arche_platform_set_wake_detect_state(arche_pdata, WD_STATE_IDLE); - - arche_pdata->dev = &pdev->dev; - - spin_lock_init(&arche_pdata->wake_lock); - mutex_init(&arche_pdata->platform_state_mutex); - arche_pdata->wake_detect_irq = - gpiod_to_irq(arche_pdata->wake_detect); - - ret = devm_request_threaded_irq(dev, arche_pdata->wake_detect_irq, - arche_platform_wd_irq, - arche_platform_wd_irq_thread, - IRQF_TRIGGER_FALLING | - IRQF_TRIGGER_RISING | IRQF_ONESHOT, - dev_name(dev), arche_pdata); - if (ret) { - dev_err(dev, "failed to request wake detect IRQ %d\n", ret); - return ret; - } - disable_irq(arche_pdata->wake_detect_irq); - - ret = device_create_file(dev, &dev_attr_state); - if (ret) { - dev_err(dev, "failed to create state file in sysfs\n"); - return ret; - } - - ret = of_platform_populate(np, NULL, NULL, dev); - if (ret) { - dev_err(dev, "failed to populate child nodes %d\n", ret); - goto err_device_remove; - } - - arche_pdata->pm_notifier.notifier_call = arche_platform_pm_notifier; - ret = register_pm_notifier(&arche_pdata->pm_notifier); - if (ret) { - dev_err(dev, "failed to register pm notifier %d\n", ret); - goto err_depopulate; - } - - /* Explicitly power off if requested */ - if (!of_property_read_bool(pdev->dev.of_node, "arche,init-off")) { - mutex_lock(&arche_pdata->platform_state_mutex); - ret = arche_platform_coldboot_seq(arche_pdata); - if (ret) { - mutex_unlock(&arche_pdata->platform_state_mutex); - dev_err(dev, "Failed to cold boot svc %d\n", ret); - goto err_unregister_pm_notifier; - } - arche_platform_wd_irq_en(arche_pdata); - mutex_unlock(&arche_pdata->platform_state_mutex); - } - - dev_info(dev, "Device registered successfully\n"); - return 0; - -err_unregister_pm_notifier: - unregister_pm_notifier(&arche_pdata->pm_notifier); -err_depopulate: - of_platform_depopulate(dev); -err_device_remove: - device_remove_file(&pdev->dev, &dev_attr_state); - return ret; -} - -static void arche_platform_remove(struct platform_device *pdev) -{ - struct arche_platform_drvdata *arche_pdata = platform_get_drvdata(pdev); - - unregister_pm_notifier(&arche_pdata->pm_notifier); - device_remove_file(&pdev->dev, &dev_attr_state); - of_platform_depopulate(&pdev->dev); - arche_platform_poweroff_seq(arche_pdata); - - if (usb3613_hub_mode_ctrl(false)) - dev_warn(arche_pdata->dev, "failed to control hub device\n"); -} - -static __maybe_unused int arche_platform_suspend(struct device *dev) -{ - /* - * If timing profile permits, we may shutdown bridge - * completely - * - * TODO: define shutdown sequence - * - * Also, need to make sure we meet precondition for unipro suspend - * Precondition: Definition ??? - */ - return 0; -} - -static __maybe_unused int arche_platform_resume(struct device *dev) -{ - /* - * At least for ES2 we have to meet the delay requirement between - * unipro switch and AP bridge init, depending on whether bridge is in - * OFF state or standby state. - * - * Based on whether bridge is in standby or OFF state we may have to - * assert multiple signals. Please refer to WDM spec, for more info. - * - */ - return 0; -} - -static void arche_platform_shutdown(struct platform_device *pdev) -{ - struct arche_platform_drvdata *arche_pdata = platform_get_drvdata(pdev); - - arche_platform_poweroff_seq(arche_pdata); - - usb3613_hub_mode_ctrl(false); -} - -static SIMPLE_DEV_PM_OPS(arche_platform_pm_ops, - arche_platform_suspend, - arche_platform_resume); - -static const struct of_device_id arche_platform_of_match[] = { - /* Use PID/VID of SVC device */ - { .compatible = "google,arche-platform", }, - { }, -}; -MODULE_DEVICE_TABLE(of, arche_platform_of_match); - -static struct platform_driver arche_platform_device_driver = { - .probe = arche_platform_probe, - .remove = arche_platform_remove, - .shutdown = arche_platform_shutdown, - .driver = { - .name = "arche-platform-ctrl", - .pm = &arche_platform_pm_ops, - .of_match_table = arche_platform_of_match, - } -}; - -static int __init arche_init(void) -{ - int retval; - - retval = platform_driver_register(&arche_platform_device_driver); - if (retval) - return retval; - - retval = arche_apb_init(); - if (retval) - platform_driver_unregister(&arche_platform_device_driver); - - return retval; -} -module_init(arche_init); - -static void __exit arche_exit(void) -{ - arche_apb_exit(); - platform_driver_unregister(&arche_platform_device_driver); -} -module_exit(arche_exit); - -MODULE_LICENSE("GPL v2"); -MODULE_AUTHOR("Vaibhav Hiremath vaibhav.hiremath@linaro.org"); -MODULE_DESCRIPTION("Arche Platform Driver"); diff --git a/drivers/staging/greybus/arche_platform.h b/drivers/staging/greybus/arche_platform.h deleted file mode 100644 index 9d997f2d6517..000000000000 --- a/drivers/staging/greybus/arche_platform.h +++ /dev/null @@ -1,28 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Arche Platform driver to enable Unipro link. - * - * Copyright 2015-2016 Google Inc. - * Copyright 2015-2016 Linaro Ltd. - */ - -#ifndef __ARCHE_PLATFORM_H -#define __ARCHE_PLATFORM_H - -enum arche_platform_state { - ARCHE_PLATFORM_STATE_OFF, - ARCHE_PLATFORM_STATE_ACTIVE, - ARCHE_PLATFORM_STATE_STANDBY, - ARCHE_PLATFORM_STATE_FW_FLASHING, -}; - -int __init arche_apb_init(void); -void __exit arche_apb_exit(void); - -/* Operational states for the APB device */ -int apb_ctrl_coldboot(struct device *dev); -int apb_ctrl_fw_flashing(struct device *dev); -int apb_ctrl_standby_boot(struct device *dev); -void apb_ctrl_poweroff(struct device *dev); - -#endif /* __ARCHE_PLATFORM_H */