Lava-users

lava-users@lists.linaro.org

358 discussions

by ljh_dev

Refer to https://validation.linaro.org/scheduler/job/1890179,I had run a test case in real board successfully The nfsrootfs image is too big ,it took too many download time in every test. So I put kernel nfs and dtb image files on tftp server, then delete deploy action and add a few boot action commands to specify tftp addr... The parameters(login_prompt&usrname&prompts) of the boot action are same with success version(has deploy action): ... - boot: connection: telnet localhost 7000 method: u-boot ##note the fellow commands lines is new added,the success version(has deploy action)that commands line is only "commands:nfs" commands: - setenv serverip 192.168.1.5 - tftp 0x8...0000 zImage_arm_1 - tftp 0x4...0000 dtb_arm_1 - setenv nfsroot rootfs_1 - boot auto_login: login_prompt: "arm login:" username: root prompts: - root@arm:~# timeout: minutes: 3 ... After job submited,the log display that kernel startup and rootfs mount ok, but it always failed at login error. error log lines: err info:lava-test-shell: Wait for prompt ['root@arm:~#', 'Login incorrect', 'Login timed out', 'lava-test: # '] (timeout 00:05:00) Nothing to run. Maybe the 'deploy' stage is missing, otherwise this is a bug which should be reported. In addition， does the uboot prompts(u-boot=>) no need to describe in boot action section? In other words the prompts auto_login is only described for kernel?

6 years, 3 months

how does lava choose job action parallel parameter blocks?

by john zhang

in https://git.linaro.org/lava/lava.git/tree/lava_dispatcher/devices/bbb-01.ya… The boot action includes some marked blocks: oe ,master,nfs... It can be seen that there are multiple command blocks,but lava how tochoose the one of these mark blocks at runtime?Is it passed in by which parameter?

6 years, 3 months

how to step by step to build real machine testing

by ljh_dev

Lava document contains content of how to add simple qemu devices and how to write its job define. But it does not contain how to add real machine device and how to write its test job like uboot image and linex kernel specifications,etc. Is there any document on how to step by step to build real machine testing?

6 years, 3 months

correspondence between uboot manual commands and job definition script commands.

by ljh_dev

I have an important question neet to clarify. For exampe when I manunl boot kernel by uboot, once board startup and into uboot interactive environment, I manual input follow command as: setenv image zImage_mx.... setenv nfsroot /rootfs/rootfs001.... ... if I whan to dispatcher to boot the board kernel, I need write job definition,Is it written like this?: boot: # list of boot methods which this device supports. methods: - u-boot: parameters: ... oe: commands: - setenv image zImage_mx.... - setenv nfsroot /rootfs/rootfs001....

6 years, 3 months

In which config file is described the path of uboot and kernel image or qemu?

by ljh_dev

Through web admin interface,I had added qemu device,and web devices list can display qemu device. It seems qemu device had startuped ok. We know that if linux device startup successfully it must included uboot and kernel image. But where are the uboot image and kernel image of qemu ? In which config file is described the path of uboot and kernel image?

6 years, 3 months

about qemu device dictionary config

by ljh_dev

I am building lava test system and currently add new addvice. According to document than step of "Adding a dictionary to the first QEMU device",follow config items neet to write to .jianja2 file. {% extends 'qemu.jinja2' %} {% set mac_addr = '52:54:00:12:34:59' %} {% set memory = '1024' %} Which file is to be writen to above config items ?does its directory path must be at path:/etc/lava-server/dispatcher-config/device-types/? How to make these items take effect immediatly?which command to use to take effect above config items? the document is not said.

6 years, 3 months

booting from USB thumb drive

by Hussin, Mohamad Noor Alim

Hi, I using LAVA version 2018.5-post1 to boot from USB thumb drive using Yocto Project's image. The LAVA job definition contain 2 deployments and booting actions. The first deployment is deploy the image to NFS server and boot using TFTP method. The second deployment is download an image to DUT and flash it on USB thumb drive. The DUT was able to download the image however it failed at flash to thumb drive. I'm use dd command as my tool to flash the image. Below is an example on lava-job definition and output message from LAVA. Due to this issue, I unable to boot from USB thumb drive. Did anyone know what is the problem? Snipped code from lava-job definition to deploy on USB thumb drive - deploy: timeout: minutes: 30 to: usb image: url: file:///home/user/image/yocto-image.xz compression: xz root_partition: 1 device: 'boot' download: tool: '/usr/bin/wget' prompt: 'HTTP request sent, awaiting response...' options: '--S {DOWNLOAD_URL}' os: oe The command from LAVA wget http://lavadisptcher.com/tmp/storage/image/yocto-image.xz | dd of=/dev/disk/by-id/<myusbthumdriveid> bs=4M This is the output message form LAVA after download flash the image 0+0 records in 0+0 records out 0 bytes copied Regards, Alim Hussin

6 years, 3 months

when add a new real device, do the uboot and kernel program need to be modified according to the lava specifications?

by ljh_dev

Hi, I think the lava web document is relatively simple.I still have some basic questions that didn’t understand. I want to add new real board(for example the arm development board,includes serial,ethernet interface etc)into lava environment. The board had ordinary uboot program, and uboot can download linux kernel image by ethernet interface. If treat it as DUT to run test,do the uboot and kernel program need to be modified or both configuration need to be modified?

6 years, 3 months

is the uboot image location specified in the job definition file?

by ljh_dev

When used real board(not qemu),is the uboot image location specified in the job definition file? If so, what keyword is used to indicate the uboot image location? The lava document description is not enough.

6 years, 3 months

How to rename a devicetype (and deprecate the old one)

by LABBE Corentin

Hello I have a cubietruck in LAVA, but its devicetype does not follow the rule "devicetype should be the same as devicetree name". Diverting from this rule, make difficult to find if the device is already handled by LAVA. I have lots of other boards which suffer the same problem (odroid-xu3 for example) Do you already have a process for renaming devicetype ? If not, why about duplicating to the correct name (sun7i-a20-cubietruck) and adding some tags (comment like "{# set deprecated = true}") to the old one. The deprectation warning could be printed by the LAVA web interface like the warning about not having health checks. After some release, the deprecated devicetype could be removed. Regards

6 years, 3 months

← Newer
1
2
3
4
5
6
7
...
36
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

Lava-users