We've just started running a weekly benchmark of GCC trunk and Linaro
GCC tip. I've written a short script that compares against a baseline
and spits out a graph:
http://ex.seabright.co.nz/benchmarks/gcc-4.8~svn.pnghttp://ex.seabright.co.nz/benchmarks/gcc-linaro-4.7%2bbzr.png
I'll switch the baseline to GCC 4.7.0 once the build and benchmark run
completes. The gcc-linaro results need more data before they'll make
sense.
Part way there. An automatic email would be next. We should check
the graphs before each performance call.
-- Michael, who needs to get moving on LAVA
== GCC ==
* Checked in fix to LP bug 1020601 (missed optimization with
multiple __builtin_unreachable calls) to Linaro GCC 4.7.
* Implemented and tested alternative fix for incorrect pool
placement with -O0 by splitting all insns in machine-
dependent reorg.
* Continued investigation of reload bug reported by ARM.
== GDB ==
* Tested GDB 7.5 branch on ARM, found a couple of regressions.
Worked on fixing HW breakpoint/watchpoint regressions.
Mit freundlichen Gruessen / Best Regards
Ulrich Weigand
--
Dr. Ulrich Weigand | Phone: +49-7031/16-3727
STSM, GNU compiler and toolchain for Linux on System z and Cell/B.E.
IBM Deutschland Research & Development GmbH
Vorsitzender des Aufsichtsrats: Martin Jetter | Geschäftsführung: Dirk
Wittkopp
Sitz der Gesellschaft: Böblingen | Registergericht: Amtsgericht
Stuttgart, HRB 243294
Current Milestones:
|| || Planned || Estimate || Actual ||
||cp15-rework || 2012-01-06 || 2012-06-23 || 2012-06-24 ||
||a15-lpae-support || 2012-07-13 || 2012-07-20 || 2012-07-20 ||
||clean-up-kvm-patches || || || ||
||track-kvm-abi-changes || || || ||
||fake-trustzone || || || ||
Overall KVM plan for 'do by end August': QEMU parts of this are a mix
of clean-up-kvm-patches and track-kvm-abi-changes blueprints, mostly.
http://cards.linaro.org/browse/CARD-167
== a15-lpae-support ==
* LPAE patches now merged upstream
* v2 of vexpress-large-ram-size sent upstream, code reviewed
and put into arm-devs pullreq. Hasn't hit master yet but
I expect that to happen over the next week.
== clean-up-kvm-patches ==
* squashed together some kvm patches in the qemu-linaro tree
* sent upstream a few patches where we can avoid an ARM-KVM
specific change by instead generalising the upstream code not
to have an explicit list of KVM supporting architectures
* started looking at how best to clean up some working-but-ugly
code handling interrupts in the QEMU KVM-ARM patchset. Among
other problems, this is messy to fix because at the moment
upstream is overloading "is there an in kernel irqchip?" to
mean both "should we use QEMU's irqchip model or not?" and
"is the interrupt injection model synchronous or asynchronous?"
because on x86 they are (for historical reasons) the same.
For ARM we only want to decide which irqchip model to use,
not anything else...
== other ==
* upstream review (various exynos patches, mostly)
* some patches fixing problems with compiler warnings in
configure test fragments
* arm-devs pullreq
KVM blueprint progress tracker:
http://apus.seabright.co.nz/helpers/backlog?group_by=topic&colour_by=state&…
-- PMM
Hi Ramana, Ulrich. Could I have some help with an unexpected
testsuite failure while backporting Carrot's adddi patch?
testsuite/gcc.misc-tests/gcov-7.c builds and runs but aborts during
leave() due to unexpected results.
The merge request is here:
https://code.launchpad.net/~michaelh1/gcc-linaro/core-adddi/+merge/113111
The testsuite diff is here:
http://ex.seabright.co.nz/build/gcc-linaro-4.7+bzr115001~michaelh1~core-add…
The build tree is at:
cbuild@tcpanda02.v:/scratch/cbuild/slave/slaves/tcpanda02/gcc-linaro-4.7+bzr115001~michaelh1~core-adddi/gcc/default/build
The failing and working versions are on tcpanda02 as ~/gcov-7.exe and
~/gcov-7-ok.
Here's the details:
* The test is fine when built from the command line
* The test is fine on the hard float Precise build
* The failing binary works fine when run on Precise
* The disassembled body (not libraries) is identical modulo changes
in addresses
* The fault goes away with a static linking via adding "--tool_opts '-static'"
* The fault persists with binutils 2.22
* The fault persists with the eglibc 2.15 loader
I assume the testsuite picks up a different libgcc and libgcov somehow
which gives a different executable. It's strange that the static
linked version is fine, and that the failing binary works fine on a
different host.
Could you have a poke in the build tree?
-- Michael
== GCC ==
* Tom de Vries fixed root cause of LP bug 1020601 (missed
optimization with multiple __builtin_unreachable calls)
on mainline. Backported to Linaro GCC 4.7 and tested.
Fixed bug exposed by backport (latent in mainline).
* Continued investigation of reload bug reported by ARM.
== Misc ==
* Attended GNU Tools Cauldron in Prague. Presented on
GDB remote/native feature parity work.
Mit freundlichen Gruessen / Best Regards
Ulrich Weigand
--
Dr. Ulrich Weigand | Phone: +49-7031/16-3727
STSM, GNU compiler and toolchain for Linux on System z and Cell/B.E.
IBM Deutschland Research & Development GmbH
Vorsitzender des Aufsichtsrats: Martin Jetter | Geschäftsführung: Dirk
Wittkopp
Sitz der Gesellschaft: Böblingen | Registergericht: Amtsgericht
Stuttgart, HRB 243294
Current Milestones:
|| || Planned || Estimate || Actual ||
||cp15-rework || 2012-01-06 || 2012-06-23 || 2012-06-24 ||
||a15-lpae-support || 2012-07-13 || 2012-07-20 || ||
||clean-up-kvm-patches || || || ||
||track-kvm-abi-changes || || || ||
||fake-trustzone || || || ||
Overall KVM plan for 'do by end August': QEMU parts of this are a mix
of clean-up-kvm-patches and track-kvm-abi-changes blueprints, mostly.
http://cards.linaro.org/browse/CARD-167
== a15-lpae-support ==
* LPAE patchset in latest target-arm pullreq sent upstream
* Kernel patch to get it not to throw away high bits of RAM
size Acked by Will and sent to RMK's patch system
* vexpress patchset for large RAM sizes had a few review
issues which I think I've sorted; need to roll a v2
* push back estimate date a week to account for: large-ram-size
work wasn't in my original list of work here; code review wait
times [ie not much real work remaining, but some time delay]
== other ==
* updated to new fast model and kernel and rechecked that my local
setup still works OK
* qemu-linaro 2012.07 released
* usual upstream patch review
* finally bit the bullet and upgraded my ancient Ubuntu desktop
KVM blueprint progress tracker:
http://apus.seabright.co.nz/helpers/backlog?group_by=topic&colour_by=state&…
The Linaro Toolchain Working Group is pleased to announce the 2012.07
release of both Linaro GCC 4.7 and Linaro GCC 4.6.
Linaro GCC 4.7 2012.07 is the fourth release in the 4.7 series. Based
off the latest GCC 4.7.0+svn189098 release, it includes performance
improvements around choice of auto-increment based addressing modes
for floating point values.
Interesting changes include:
Updates to GCC 4.7.0+svn189098
Implements improvements to ivopts selection of addressing modes of
floating point values.
Fixes:
LP: #1010826 - Invalid unaligned loads in vectorized code.
Linaro GCC 4.6 2012.07 is the seventeenth release in the 4.6 series.
Based off the latest GCC 4.6.3+svn189058 release, this is the fourth
release after entering maintenance.
Interesting changes include:
Updates to 4.6.3+svn189058
Fixes:
LP: #1010826 - Invalid unaligned loads in vectorized code. LP:
#1013209 - Internal compiler error when building neon intrinsics.
The source tarballs are available from:
https://launchpad.net/gcc-linaro/+milestone/4.7-2012.07https://launchpad.net/gcc-linaro/+milestone/4.6-2012.07
Downloads are available from the Linaro GCC page on Launchpad:
https://launchpad.net/gcc-linaro
More information on the features and issues are available from the release page:
https://launchpad.net/gcc-linaro/4.7/4.7-2012.07https://launchpad.net/gcc-linaro/4.6/4.6-2012.07
Mailing list: http://lists.linaro.org/mailman/listinfo/linaro-toolchain
Bugs: https://bugs.launchpad.net/gcc-linaro/
Questions? https://ask.linaro.org/
Interested in commercial support? Inquire at support(a)linaro.org
The Linaro Toolchain Working Group is pleased to announce the release of
Linaro QEMU 2012.07.
Linaro QEMU 2012.07 is the latest monthly release of qemu-linaro. Based
off upstream (trunk) QEMU, it includes a number of ARM-focused bug fixes
and enhancements.
There are no major changes in this month's release, though
it has been updated to track the latest upstream QEMU changes.
Known issues:
- Graphics do not work for OMAP3 based models (beagle, overo)
with 11.10 Linaro images.
- Audio may not work on Versatile Express models with the latest
Linaro kernel/hardware packs (LP:977610).
The source tarball is available at:
https://launchpad.net/qemu-linaro/+milestone/2012.07
More information on Linaro QEMU is available at:
https://launchpad.net/qemu-linaro
== GCC ==
* Investigated bootstrap comparison failure with neon-shifts
branch; tracked down root cause to pre-existing bug in GCC
common code. Fix checked in to FSF mainline and 4.7 branch.
* Investigated di-sync-multithread test case failure with
neon-shifts branch; root cause was missing length attributes
for sync.md insn&split patterns. Implemented fix and
restarted tests.
* Investigated LP bug 1020601, missed optimization with multiple
__builtin_unreachable calls. Tracked down root cause and
started discussion of possible fixes on gcc-patches.
* Investigated potential reload bug reported by ARM.
Mit freundlichen Gruessen / Best Regards
Ulrich Weigand
--
Dr. Ulrich Weigand | Phone: +49-7031/16-3727
STSM, GNU compiler and toolchain for Linux on System z and Cell/B.E.
IBM Deutschland Research & Development GmbH
Vorsitzender des Aufsichtsrats: Martin Jetter | Geschäftsführung: Dirk
Wittkopp
Sitz der Gesellschaft: Böblingen | Registergericht: Amtsgericht
Stuttgart, HRB 243294
