All,
During Connect the suggestion was made that each working group should have
its own IRC Channel for discussions and topics relating to the group in
particular (as opposed to #linaro which is 'generic' Linaro conversations).
Therefore I have just set up #linaro-tcwg on Freenode for the Toolchain
Working Group.
This channel is public and open to anyone who wants to talk with the TCWG
group about anything toolchain related.
Thanks,
Matt
--
Matthew Gretton-Dann
Toolchain Working Group, Linaro
Hi,
You are receiving this email because you are listed as the owner for at least one LLVM build slave on http://lab.llvm.org:8011/buildslaves <http://lab.llvm.org:8011/buildslaves>.
This message is a heads up concerning the upcoming upgrade of CMake discussed here: http://lists.llvm.org/pipermail/llvm-dev/2020-March/140349.html <http://lists.llvm.org/pipermail/llvm-dev/2020-March/140349.html>. As discussed on that thread, LLVM will require CMake 3.13.4 in order to build after the release branch for LLVM 11.0.0 is created. Using an older CMake will be an error.
In order to keep things running smoothly, we would greatly appreciate if you could upgrade CMake on your builder(s) to at least CMake 3.13.4 before the next release branch is created. Please reply privately to this email when you've done so -- this will allow keeping track of who has and has not upgraded.
Thank you and have a wonderful day,
Louis
Short week (4 days)
== Progress ==
* GCC upstream validation:
- reported a couple of failures/regressions
- still looking at improving MVE tests to avoid failures in several
non-supported configurations. No satisfactory solution so far (there
are always combinations of GCC configure option and validation-time
options that are incompatible and produce failures instead of
unsupported)
- maybe we should agree on a common way of running the testsuite
* GCC:
- PR94743 (IRQ handler and Neon registers): sent a patch to emit a
warning. More ambitious patches would be too intrusive for stage 4.
* FDPIC/GDB:
- no progress this week
* misc:
- infra fixes / troubleshooting / reviews
- started looking at cortex-m benchmarking harnesses
== Next ==
* FDPIC GDB
* GCC/cortex-M
* cortex-m benchmarking
== Progress ==
* Morello
- Finished capability formatting
- Got a couple cosmetic patches in review
- Also reviewing needed ptrace support
== Plan ==
* More Morello
[VIRT-349 # QEMU SVE2 Support ]
More progress on insn implementation.
More patches from Stephen Long merged.
More good review from Laurent Desnogues.
Down to perhaps 30 insns remaining, and then figuring out some miscomparisons
reported by Laurent, but not diagnosed.
[VIRT-344 # ARMv8.5-MemTag ]
Fixed an exception return bug vs PSTATE.TCO.
[VIRT-327 # Richard's upstream QEMU work ]
Posted some tcg patch sets for 5.1.
Worked on the sparc regression Alex reported vs TEMP_CONST. I've set that
aside for now; I need to come up with a new scheme to debug that one.
r~
Progress:
* VIRT-65 [QEMU upstream maintainership]
- We needed an rc4 (which I wasn't very surprised about), so more
release wrangling again.
- Noticed some bugs in how we set ID registers for the AArch64 'max' CPU;
sent patches (one of which seemed worth getting into rc4)
- There's been a long-standing problem where a linux-user QEMU running
on a 64-bit host and emulating a 32-bit guest can't deal with the
64-bit hash 'offsets' from ext4 getdents, which causes guests using
newer glibc to fail. Linus Walleij wrote a kernel patch which allows
QEMU to request that the kernel gives it hash values that will fit
into 32 bits. I wrote an RFC QEMU patch that would use this and tested
that this does indeed solve the problem. Discussion is continuing on
the kernel size about what the correct API for this is, but the
principle that the kernel should change seems to be accepted.
- A bug was raised that BKPT for arm linux-user wasn't causing SIGTRAP;
sent patches fixing that and some other issues I noticed in that
bit of the code while I was fixing it.
- code review:
+ a patch adding proper FIFO emulation to the PL011 UART model
+ rth's patchset improving codegen of neon integer-compare-vs-0 insns
+ xilinx patchset to disable unsupported FDT firmware nodes
+ patchset adding kaslr-seed properties to the virt board dtb
(mostly useful for OP-TEE)
* VIRT-364 [QEMU support for ARMv8.1-M extensions]
- Progress with neon decodetree conversion. I've now completed all
the 3-reg-same insn grouping, which is a large enough amount that
I'm planning to send out a patchset with what I have so far.
Need to refactor/tidy up some bits of the code first, now I can
see what the completed conversion looks like.
thanks
-- PMM
== Progress ==
* GCC upstream validation:
- reported a couple of failures/regressions
* GCC:
- Committed a few fixes to MVE/CDE tests to avoid failures on
arm-linux-gnueabi toolchains
- Sent a few more testcases fixes
- PR94538 (pure-code/M23): Let Wilco handle it since he has more testcases
- Looked at Linaro bug #5614, and forwarded it for upstream discussion
as PR94743 (IRQ handler and Neon registers)
* FDPIC/GDB:
- rebased gdbserver patches, it still crashes at runtime. Code size
bigger than my last attempt with gdb-8.x.
- tried to link it statically, but that fails because of multiple defs
in uclibc.
* misc:
- infra fixes / troubleshooting / reviews
- lots of disruptions
== Next ==
* FDPIC GDB
* GCC/cortex-M
Looks like there might be something wrong with this buildbot? (none of the
commits seem to have changed lnt - or maybe lnt isn't monitored/blamed in
the buildbot config?)
On Tue, Apr 21, 2020 at 12:16 AM <llvm.buildmaster(a)lab.llvm.org> wrote:
> The Buildbot has detected a new failure on builder clang-cmake-armv8-lld
> while building llvm.
> Full details are available at:
> http://lab.llvm.org:8011/builders/clang-cmake-armv8-lld/builds/3875
>
> Buildbot URL: http://lab.llvm.org:8011/
>
> Buildslave for this Build: linaro-armv8-01-arm-lld
>
> Build Reason: scheduler
> Build Source Stamp: [branch master]
> c2d86e1f3044abb295796c8267c7b9057f54a067
> Blamelist: Alexander Shaposhnikov <alexshap(a)fb.com>,Chris Bieneman <
> chris.bieneman(a)me.com>,Dan Liew <dan(a)su-root.co.uk>,David Blaikie <
> dblaikie(a)gmail.com>,Johannes Doerfert <johannes(a)jdoerfert.de>,Mircea
> Trofin <mtrofin(a)google.com>,Pavel Iliin <Pavel.Iliin(a)arm.com>,Sam Kerner <
> skerner(a)chromium.org>,Shengchen Kan <shengchen.kan(a)intel.com>,Sriraman
> Tallam <tmsriram(a)google.com>
>
> BUILD FAILED: failed setup lit
>
> sincerely,
> -The Buildbot
>
>
>
>
Short weeks around Easter.
[VIRT-349 # QEMU SVE2 Support ]
Lots of progress on insn implementation.
Several patches from Stephen Long merged. He's coming up to speed nicely.
Some good review from Laurent Desnogues.
Spent some time writing a version of strspn for Arm optimized-routines, as a
way of testing the NMATCH instruction. Found bugs in the tcg optimizer
instead. Still in the process of rebasing the branch upon those fixes, and
upon patch review from Peter.
[VIRT-327 # Richard's upstream QEMU work ]
Couple of patches for 5.0.
[GCC]
Posted v4 of aarch64 cmpti patch set.
r~
