linaro-toolchain

linaro-toolchain@lists.linaro.org

4 participants
5604 discussions

[CI-NOTIFY]: TCWG Bisect tcwg_bmk_tk1/gnu-release-arm-spec2k6-O3_LTO - Build # 28 - Successful!

by ci_notify＠linaro.org

Successfully identified regression in *gcc* in CI configuration tcwg_bmk_gnu_tk1/gnu-release-arm-spec2k6-O3_LTO. So far, this commit has regressed CI configurations: - tcwg_bmk_gnu_tk1/gnu-release-arm-spec2k6-O3_LTO Culprit: <cut> commit c7207339a7dbce5b68f872064e624dcf1639ba46 Author: Wilco Dijkstra <wdijkstr(a)arm.com> Date: Mon Oct 14 12:21:14 2019 +0000 [ARM] Switch to default sched pressure algorithm Currently the Arm backend selects the alternative sched pressure algorithm. The issue is that this doesn't take register pressure into account, and so it causes significant additional spilling on Arm where there are only 14 allocatable registers. Building SPEC2006 showed significant codesize gains with the default pressure algorithm, so switch back to that. PR77308 shows ~800 fewer instructions. SPECINT2006 is ~0.6% faster on Cortex-A57 together with the other DImode patches. Overall SPEC codesize is 1.1% smaller. gcc/ * config/arm/arm.c (arm_option_override): Don't override sched pressure algorithm. From-SVN: r276960 </cut> Results regressed to (for first_bad == c7207339a7dbce5b68f872064e624dcf1639ba46) # reset_artifacts: -10 # build_abe binutils: -9 # build_abe stage1 -- --set gcc_override_configure=--with-mode=arm --set gcc_override_configure=--disable-libsanitizer: -8 # build_abe linux: -7 # build_abe glibc: -6 # build_abe stage2 -- --set gcc_override_configure=--with-mode=arm --set gcc_override_configure=--disable-libsanitizer: -5 # true: 0 # benchmark -O3_LTO_marm -- artifacts/build-c7207339a7dbce5b68f872064e624dcf1639ba46/results_id: 1 # 435.gromacs,gromacs_base.default regressed by 106 # 459.GemsFDTD,GemsFDTD_base.default regressed by 103 # 436.cactusADM,cactusADM_base.default regressed by 115 # 444.namd,namd_base.default regressed by 103 # 482.sphinx3,sphinx_livepretend_base.default regressed by 103 # 410.bwaves,bwaves_base.default regressed by 107 # 454.calculix,calculix_base.default regressed by 105 from (for last_good == 7bd8bec53f0e43c7a7852c54650746e65324514b) # reset_artifacts: -10 # build_abe binutils: -9 # build_abe stage1 -- --set gcc_override_configure=--with-mode=arm --set gcc_override_configure=--disable-libsanitizer: -8 # build_abe linux: -7 # build_abe glibc: -6 # build_abe stage2 -- --set gcc_override_configure=--with-mode=arm --set gcc_override_configure=--disable-libsanitizer: -5 # true: 0 # benchmark -O3_LTO_marm -- artifacts/build-7bd8bec53f0e43c7a7852c54650746e65324514b/results_id: 1 Artifacts of last_good build: https://ci.linaro.org/job/tcwg_bmk_ci_gnu-bisect-tcwg_bmk_tk1-gnu-release-a… Results ID of last_good: tk1_32/tcwg_bmk_gnu_tk1/bisect-gnu-release-arm-spec2k6-O3_LTO/1638 Artifacts of first_bad build: https://ci.linaro.org/job/tcwg_bmk_ci_gnu-bisect-tcwg_bmk_tk1-gnu-release-a… Results ID of first_bad: tk1_32/tcwg_bmk_gnu_tk1/bisect-gnu-release-arm-spec2k6-O3_LTO/1643 Build top page/logs: https://ci.linaro.org/job/tcwg_bmk_ci_gnu-bisect-tcwg_bmk_tk1-gnu-release-a… Configuration details: Reproduce builds: <cut> mkdir investigate-gcc-c7207339a7dbce5b68f872064e624dcf1639ba46 cd investigate-gcc-c7207339a7dbce5b68f872064e624dcf1639ba46 git clone https://git.linaro.org/toolchain/jenkins-scripts mkdir -p artifacts/manifests curl -o artifacts/manifests/build-baseline.sh https://ci.linaro.org/job/tcwg_bmk_ci_gnu-bisect-tcwg_bmk_tk1-gnu-release-a… --fail curl -o artifacts/manifests/build-parameters.sh https://ci.linaro.org/job/tcwg_bmk_ci_gnu-bisect-tcwg_bmk_tk1-gnu-release-a… --fail curl -o artifacts/test.sh https://ci.linaro.org/job/tcwg_bmk_ci_gnu-bisect-tcwg_bmk_tk1-gnu-release-a… --fail chmod +x artifacts/test.sh # Reproduce the baseline build (build all pre-requisites) ./jenkins-scripts/tcwg_bmk-build.sh @@ artifacts/manifests/build-baseline.sh # Save baseline build state (which is then restored in artifacts/test.sh) rsync -a --del --delete-excluded --exclude bisect/ --exclude artifacts/ --exclude gcc/ ./ ./bisect/baseline/ cd gcc # Reproduce first_bad build git checkout --detach c7207339a7dbce5b68f872064e624dcf1639ba46 ../artifacts/test.sh # Reproduce last_good build git checkout --detach 7bd8bec53f0e43c7a7852c54650746e65324514b ../artifacts/test.sh cd .. </cut> History of pending regressions and results: https://git.linaro.org/toolchain/ci/base-artifacts.git/log/?h=linaro-local/… Artifacts: https://ci.linaro.org/job/tcwg_bmk_ci_gnu-bisect-tcwg_bmk_tk1-gnu-release-a… Build log: https://ci.linaro.org/job/tcwg_bmk_ci_gnu-bisect-tcwg_bmk_tk1-gnu-release-a… Full commit (up to 1000 lines): <cut> commit c7207339a7dbce5b68f872064e624dcf1639ba46 Author: Wilco Dijkstra <wdijkstr(a)arm.com> Date: Mon Oct 14 12:21:14 2019 +0000 [ARM] Switch to default sched pressure algorithm Currently the Arm backend selects the alternative sched pressure algorithm. The issue is that this doesn't take register pressure into account, and so it causes significant additional spilling on Arm where there are only 14 allocatable registers. Building SPEC2006 showed significant codesize gains with the default pressure algorithm, so switch back to that. PR77308 shows ~800 fewer instructions. SPECINT2006 is ~0.6% faster on Cortex-A57 together with the other DImode patches. Overall SPEC codesize is 1.1% smaller. gcc/ * config/arm/arm.c (arm_option_override): Don't override sched pressure algorithm. From-SVN: r276960 --- gcc/ChangeLog | 5 +++++ gcc/config/arm/arm.c | 5 ----- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/gcc/ChangeLog b/gcc/ChangeLog index c2cbd4274ca..f07a0e61e6b 100644 --- a/gcc/ChangeLog +++ b/gcc/ChangeLog @@ -1,3 +1,8 @@ +2019-10-14 Wilco Dijkstra <wdijkstr(a)arm.com> + + * config/arm/arm.c (arm_option_override): Don't override sched + pressure algorithm. + 2019-10-14 Richard Biener <rguenther(a)suse.de> PR tree-optimization/92069 diff --git a/gcc/config/arm/arm.c b/gcc/config/arm/arm.c index 39e1a1ef9a2..394b1dd1902 100644 --- a/gcc/config/arm/arm.c +++ b/gcc/config/arm/arm.c @@ -3555,11 +3555,6 @@ arm_option_override (void) global_options.x_param_values, global_options_set.x_param_values); - /* Use the alternative scheduling-pressure algorithm by default. */ - maybe_set_param_value (PARAM_SCHED_PRESSURE_ALGORITHM, SCHED_PRESSURE_MODEL, - global_options.x_param_values, - global_options_set.x_param_values); - /* Look through ready list and all of queue for instructions relevant for L2 auto-prefetcher. */ int param_sched_autopref_queue_depth; </cut>

3 years, 11 months

[CI-NOTIFY]: TCWG Bisect tcwg_bmk_tx1/gnu-master-aarch64-spec2k6-O3_LTO - Build # 20 - Successful!

by ci_notify＠linaro.org

Successfully identified regression in *gcc* in CI configuration tcwg_bmk_gnu_tx1/gnu-master-aarch64-spec2k6-O3_LTO. So far, this commit has regressed CI configurations: - tcwg_bmk_gnu_tx1/gnu-master-aarch64-spec2k6-O3_LTO Culprit: <cut> commit fedcf3c476aff7533741a1c61071200f0a38cf83 Author: Richard Biener <rguenther(a)suse.de> Date: Thu Jul 8 09:52:49 2021 +0200 tree-optimization/101373 - avoid PRE across externally throwing call PRE already tries to avoid hoisting possibly trapping expressions across calls that might not return normally but fails to consider const calls that throw externally. The following fixes that and also plugs the hole of trapping references not pruned in case they are not catched by the actuall call clobbering it. At -Os we hit the same issue in RTL PRE and postreload-gcse has even more incomplete checks so the patch adjusts both of those as well. 2021-07-08 Richard Biener <rguenther(a)suse.de> PR tree-optimization/101373 * tree-ssa-pre.c (prune_clobbered_mems): Also prune trapping references when the BB may not return. (compute_avail): Pass in the function we're working on and replace cfun references with it. Externally throwing const calls also possibly terminate the function. (pass_pre::execute): Pass down the function we're working on. * gcse.c (compute_hash_table_work): Externally throwing const/pure calls also need record_last_mem_set_info. * postreload-gcse.c (record_opr_changes): Looping or externally throwing const/pure calls also need record_last_mem_set_info. * g++.dg/torture/pr101373.C: New testcase, XFAILed. * gnat.dg/opt95.adb: Likewise. </cut> Results regressed to (for first_bad == fedcf3c476aff7533741a1c61071200f0a38cf83) # reset_artifacts: -10 # build_abe binutils: -9 # build_abe stage1 -- --set gcc_override_configure=--disable-libsanitizer: -8 # build_abe linux: -7 # build_abe glibc: -6 # build_abe stage2 -- --set gcc_override_configure=--disable-libsanitizer: -5 # true: 0 # benchmark -O3_LTO -- artifacts/build-fedcf3c476aff7533741a1c61071200f0a38cf83/results_id: 1 # 429.mcf,mcf_base.default regressed by 106 from (for last_good == fe610051a803131822bd02a8842a67b573b8e46a) # reset_artifacts: -10 # build_abe binutils: -9 # build_abe stage1 -- --set gcc_override_configure=--disable-libsanitizer: -8 # build_abe linux: -7 # build_abe glibc: -6 # build_abe stage2 -- --set gcc_override_configure=--disable-libsanitizer: -5 # true: 0 # benchmark -O3_LTO -- artifacts/build-fe610051a803131822bd02a8842a67b573b8e46a/results_id: 1 Artifacts of last_good build: https://ci.linaro.org/job/tcwg_bmk_ci_gnu-bisect-tcwg_bmk_tx1-gnu-master-aa… Results ID of last_good: tx1_64/tcwg_bmk_gnu_tx1/bisect-gnu-master-aarch64-spec2k6-O3_LTO/1618 Artifacts of first_bad build: https://ci.linaro.org/job/tcwg_bmk_ci_gnu-bisect-tcwg_bmk_tx1-gnu-master-aa… Results ID of first_bad: tx1_64/tcwg_bmk_gnu_tx1/bisect-gnu-master-aarch64-spec2k6-O3_LTO/1613 Build top page/logs: https://ci.linaro.org/job/tcwg_bmk_ci_gnu-bisect-tcwg_bmk_tx1-gnu-master-aa… Configuration details: Reproduce builds: <cut> mkdir investigate-gcc-fedcf3c476aff7533741a1c61071200f0a38cf83 cd investigate-gcc-fedcf3c476aff7533741a1c61071200f0a38cf83 git clone https://git.linaro.org/toolchain/jenkins-scripts mkdir -p artifacts/manifests curl -o artifacts/manifests/build-baseline.sh https://ci.linaro.org/job/tcwg_bmk_ci_gnu-bisect-tcwg_bmk_tx1-gnu-master-aa… --fail curl -o artifacts/manifests/build-parameters.sh https://ci.linaro.org/job/tcwg_bmk_ci_gnu-bisect-tcwg_bmk_tx1-gnu-master-aa… --fail curl -o artifacts/test.sh https://ci.linaro.org/job/tcwg_bmk_ci_gnu-bisect-tcwg_bmk_tx1-gnu-master-aa… --fail chmod +x artifacts/test.sh # Reproduce the baseline build (build all pre-requisites) ./jenkins-scripts/tcwg_bmk-build.sh @@ artifacts/manifests/build-baseline.sh # Save baseline build state (which is then restored in artifacts/test.sh) rsync -a --del --delete-excluded --exclude bisect/ --exclude artifacts/ --exclude gcc/ ./ ./bisect/baseline/ cd gcc # Reproduce first_bad build git checkout --detach fedcf3c476aff7533741a1c61071200f0a38cf83 ../artifacts/test.sh # Reproduce last_good build git checkout --detach fe610051a803131822bd02a8842a67b573b8e46a ../artifacts/test.sh cd .. </cut> History of pending regressions and results: https://git.linaro.org/toolchain/ci/base-artifacts.git/log/?h=linaro-local/… Artifacts: https://ci.linaro.org/job/tcwg_bmk_ci_gnu-bisect-tcwg_bmk_tx1-gnu-master-aa… Build log: https://ci.linaro.org/job/tcwg_bmk_ci_gnu-bisect-tcwg_bmk_tx1-gnu-master-aa… Full commit (up to 1000 lines): <cut> commit fedcf3c476aff7533741a1c61071200f0a38cf83 Author: Richard Biener <rguenther(a)suse.de> Date: Thu Jul 8 09:52:49 2021 +0200 tree-optimization/101373 - avoid PRE across externally throwing call PRE already tries to avoid hoisting possibly trapping expressions across calls that might not return normally but fails to consider const calls that throw externally. The following fixes that and also plugs the hole of trapping references not pruned in case they are not catched by the actuall call clobbering it. At -Os we hit the same issue in RTL PRE and postreload-gcse has even more incomplete checks so the patch adjusts both of those as well. 2021-07-08 Richard Biener <rguenther(a)suse.de> PR tree-optimization/101373 * tree-ssa-pre.c (prune_clobbered_mems): Also prune trapping references when the BB may not return. (compute_avail): Pass in the function we're working on and replace cfun references with it. Externally throwing const calls also possibly terminate the function. (pass_pre::execute): Pass down the function we're working on. * gcse.c (compute_hash_table_work): Externally throwing const/pure calls also need record_last_mem_set_info. * postreload-gcse.c (record_opr_changes): Looping or externally throwing const/pure calls also need record_last_mem_set_info. * g++.dg/torture/pr101373.C: New testcase, XFAILed. * gnat.dg/opt95.adb: Likewise. --- gcc/gcse.c | 3 ++- gcc/postreload-gcse.c | 4 +++- gcc/testsuite/g++.dg/torture/pr101373.C | 33 +++++++++++++++++++++++++++ gcc/testsuite/gnat.dg/opt95.adb | 40 +++++++++++++++++++++++++++++++++ gcc/tree-ssa-pre.c | 34 +++++++++++++++++----------- 5 files changed, 99 insertions(+), 15 deletions(-) diff --git a/gcc/gcse.c b/gcc/gcse.c index ecf7e51aac5..ccd33664af5 100644 --- a/gcc/gcse.c +++ b/gcc/gcse.c @@ -1537,7 +1537,8 @@ compute_hash_table_work (struct gcse_hash_table_d *table) record_last_reg_set_info (insn, regno); if (! RTL_CONST_OR_PURE_CALL_P (insn) - || RTL_LOOPING_CONST_OR_PURE_CALL_P (insn)) + || RTL_LOOPING_CONST_OR_PURE_CALL_P (insn) + || can_throw_external (insn)) record_last_mem_set_info (insn); } diff --git a/gcc/postreload-gcse.c b/gcc/postreload-gcse.c index 0b28247e299..6c95d09a1e5 100644 --- a/gcc/postreload-gcse.c +++ b/gcc/postreload-gcse.c @@ -779,7 +779,9 @@ record_opr_changes (rtx_insn *insn) EXECUTE_IF_SET_IN_HARD_REG_SET (callee_clobbers, 0, regno, hrsi) record_last_reg_set_info_regno (insn, regno); - if (! RTL_CONST_OR_PURE_CALL_P (insn)) + if (! RTL_CONST_OR_PURE_CALL_P (insn) + || RTL_LOOPING_CONST_OR_PURE_CALL_P (insn) + || can_throw_external (insn)) record_last_mem_set_info (insn); } } diff --git a/gcc/testsuite/g++.dg/torture/pr101373.C b/gcc/testsuite/g++.dg/torture/pr101373.C new file mode 100644 index 00000000000..f8c809739e2 --- /dev/null +++ b/gcc/testsuite/g++.dg/torture/pr101373.C @@ -0,0 +1,33 @@ +// { dg-do run } +// { dg-xfail-run-if "PR100409" { *-*-* } } + +int __attribute__((const,noipa)) foo (int j) +{ + if (j != 0) + throw 1; + return 0; +} + +int __attribute__((noipa)) bar (int *p, int n) +{ + int ret = 0; + if (n) + { + foo (n); + ret = *p; + } + ret += *p; + return ret; +} + +int main() +{ + try + { + return bar (nullptr, 1); + } + catch (...) + { + return 0; + } +} diff --git a/gcc/testsuite/gnat.dg/opt95.adb b/gcc/testsuite/gnat.dg/opt95.adb new file mode 100644 index 00000000000..2c72582b3f1 --- /dev/null +++ b/gcc/testsuite/gnat.dg/opt95.adb @@ -0,0 +1,40 @@ +-- { dg-do run } +-- { dg-options "-O2 -gnatp" } + +procedure Opt95 is + + function Foo (J : Integer) return Integer; + pragma Pure_Function (Foo); + pragma Machine_Attribute (Foo, "noipa"); + + function Foo (J : Integer) return Integer is + begin + if J /= 0 then + raise Constraint_Error; + end if; + return 0; + end; + + function Bar (A : access Integer; N : Integer) return Integer; + pragma Machine_Attribute (Bar, "noipa"); + + function Bar (A : access Integer; N : Integer) return Integer is + Ret : Integer := 0; + Ret2 : Integer := 0; + begin + if N /= 0 then + Ret2 := Foo (N); + Ret := A.all; + end if; + Ret := Ret + A.all; + return Ret + Ret2; + end; + + V : Integer; + pragma Volatile (V); + +begin + V := Bar (null, 1); +exception + when Constraint_Error => null; +end; diff --git a/gcc/tree-ssa-pre.c b/gcc/tree-ssa-pre.c index 69141c2f0c9..aa5244e678c 100644 --- a/gcc/tree-ssa-pre.c +++ b/gcc/tree-ssa-pre.c @@ -2071,6 +2071,13 @@ prune_clobbered_mems (bitmap_set_t set, basic_block block) && value_dies_in_block_x (expr, block)))) to_remove = i; } + /* If the REFERENCE may trap make sure the block does not contain + a possible exit point. + ??? This is overly conservative if we translate AVAIL_OUT + as the available expression might be after the exit point. */ + if (BB_MAY_NOTRETURN (block) + && vn_reference_may_trap (ref)) + to_remove = i; } else if (expr->kind == NARY) { @@ -3860,7 +3867,7 @@ insert (void) AVAIL_OUT[BLOCK] = AVAIL_IN[BLOCK] U PHI_GEN[BLOCK] U TMP_GEN[BLOCK]. */ static void -compute_avail (void) +compute_avail (function *fun) { basic_block block, son; @@ -3871,7 +3878,7 @@ compute_avail (void) /* We pretend that default definitions are defined in the entry block. This includes function arguments and the static chain decl. */ - FOR_EACH_SSA_NAME (i, name, cfun) + FOR_EACH_SSA_NAME (i, name, fun) { pre_expr e; if (!SSA_NAME_IS_DEFAULT_DEF (name) @@ -3881,31 +3888,31 @@ compute_avail (void) e = get_or_alloc_expr_for_name (name); add_to_value (get_expr_value_id (e), e); - bitmap_insert_into_set (TMP_GEN (ENTRY_BLOCK_PTR_FOR_FN (cfun)), e); - bitmap_value_insert_into_set (AVAIL_OUT (ENTRY_BLOCK_PTR_FOR_FN (cfun)), + bitmap_insert_into_set (TMP_GEN (ENTRY_BLOCK_PTR_FOR_FN (fun)), e); + bitmap_value_insert_into_set (AVAIL_OUT (ENTRY_BLOCK_PTR_FOR_FN (fun)), e); } if (dump_file && (dump_flags & TDF_DETAILS)) { - print_bitmap_set (dump_file, TMP_GEN (ENTRY_BLOCK_PTR_FOR_FN (cfun)), + print_bitmap_set (dump_file, TMP_GEN (ENTRY_BLOCK_PTR_FOR_FN (fun)), "tmp_gen", ENTRY_BLOCK); - print_bitmap_set (dump_file, AVAIL_OUT (ENTRY_BLOCK_PTR_FOR_FN (cfun)), + print_bitmap_set (dump_file, AVAIL_OUT (ENTRY_BLOCK_PTR_FOR_FN (fun)), "avail_out", ENTRY_BLOCK); } /* Allocate the worklist. */ - worklist = XNEWVEC (basic_block, n_basic_blocks_for_fn (cfun)); + worklist = XNEWVEC (basic_block, n_basic_blocks_for_fn (fun)); /* Seed the algorithm by putting the dominator children of the entry block on the worklist. */ - for (son = first_dom_son (CDI_DOMINATORS, ENTRY_BLOCK_PTR_FOR_FN (cfun)); + for (son = first_dom_son (CDI_DOMINATORS, ENTRY_BLOCK_PTR_FOR_FN (fun)); son; son = next_dom_son (CDI_DOMINATORS, son)) worklist[sp++] = son; - BB_LIVE_VOP_ON_EXIT (ENTRY_BLOCK_PTR_FOR_FN (cfun)) - = ssa_default_def (cfun, gimple_vop (cfun)); + BB_LIVE_VOP_ON_EXIT (ENTRY_BLOCK_PTR_FOR_FN (fun)) + = ssa_default_def (fun, gimple_vop (fun)); /* Loop until the worklist is empty. */ while (sp) @@ -3970,7 +3977,8 @@ compute_avail (void) before it. */ int flags = gimple_call_flags (stmt); if (!(flags & ECF_CONST) - || (flags & ECF_LOOPING_CONST_OR_PURE)) + || (flags & ECF_LOOPING_CONST_OR_PURE) + || stmt_can_throw_external (fun, stmt)) BB_MAY_NOTRETURN (block) = 1; } @@ -3987,7 +3995,7 @@ compute_avail (void) BB_LIVE_VOP_ON_EXIT (block) = gimple_vdef (stmt); if (gimple_has_side_effects (stmt) - || stmt_could_throw_p (cfun, stmt) + || stmt_could_throw_p (fun, stmt) || is_gimple_debug (stmt)) continue; @@ -4384,7 +4392,7 @@ pass_pre::execute (function *fun) we require AVAIL. */ if (n_basic_blocks_for_fn (fun) < 4000) { - compute_avail (); + compute_avail (fun); compute_antic (); insert (); } </cut>

3 years, 11 months

Patch pour qdl?

by Pascal Bourguignon

Hello, I've got a little patch for qdl, adding error messages. https://git.linaro.org/landing-teams/working/qualcomm/qdl.git/ What would be the right place to send it to? -- __Pascal Bourguignon__ http://www.sbde.fr/

3 years, 11 months

[CI-NOTIFY]: TCWG Bisect tcwg_gnu/gnu-master-arm-bootstrap_debug - Build # 13 - Successful!

by ci_notify＠linaro.org

Successfully identified regression in *gcc* in CI configuration tcwg_gnu/gnu-master-arm-bootstrap_debug. So far, this commit has regressed CI configurations: - tcwg_gnu/gnu-master-arm-bootstrap_debug Culprit: <cut> commit a110855667782dac7b674d3e328b253b3b3c919b Author: Martin Sebor <msebor(a)redhat.com> Date: Wed Jul 7 14:05:25 2021 -0600 Correct handling of variable offset minus constant in -Warray-bounds [PR100137] Resolves: PR tree-optimization/100137 - -Warray-bounds false positive on varying offset plus negative PR tree-optimization/99121 - ICE in -Warray-bounds on a multidimensional PR tree-optimization/97027 - missing warning on buffer overflow storing a larger scalar into a smaller array gcc/ChangeLog: PR tree-optimization/100137 PR tree-optimization/99121 PR tree-optimization/97027 * builtins.c (access_ref::access_ref): Also set offmax. (access_ref::offset_in_range): Define new function. (access_ref::add_offset): Set offmax. (access_ref::inform_access): Handle access_none. (handle_mem_ref): Clear ostype. (compute_objsize_r): Handle ASSERT_EXPR. * builtins.h (struct access_ref): Add offmax member. * gimple-array-bounds.cc (array_bounds_checker::check_mem_ref): Use compute_objsize() and simplify. gcc/testsuite/ChangeLog: PR tree-optimization/100137 PR tree-optimization/99121 PR tree-optimization/97027 * c-c++-common/Warray-bounds-3.c: Remove xfail * c-c++-common/Warray-bounds-4.c: Add an expected warning. * c-c++-common/Warray-bounds-9.c: New test. * c-c++-common/Warray-bounds-10.c: New test. * g++.dg/asan/asan_test.C: Suppress expected warnings. * g++.dg/pr95768.C: Same. * g++.dg/warn/Warray-bounds-10.C: Adjust text of expected messages. * g++.dg/warn/Warray-bounds-11.C: Same. * g++.dg/warn/Warray-bounds-12.C: Same. * g++.dg/warn/Warray-bounds-13.C: Same. * g++.dg/warn/Warray-bounds-17.C: Same. * g++.dg/warn/Warray-bounds-20.C: Same. * gcc.dg/Warray-bounds-29.c: Same. * gcc.dg/Warray-bounds-30.c: Add xfail. * gcc.dg/Warray-bounds-31.c: Adjust text of expected messages. * gcc.dg/Warray-bounds-32.c: Same. * gcc.dg/Warray-bounds-52.c: Same. * gcc.dg/Warray-bounds-53.c: Same. * gcc.dg/Warray-bounds-58.c: Remove xfail. * gcc.dg/Warray-bounds-63.c: Adjust text of expected messages. * gcc.dg/Warray-bounds-66.c: Same. * gcc.dg/Warray-bounds-69.c: Same. * gcc.dg/Wstringop-overflow-34.c: Same. * gcc.dg/Wstringop-overflow-47.c: Same. * gcc.dg/Wstringop-overflow-61.c: Same. * gcc.dg/Warray-bounds-77.c: New test. * gcc.dg/Warray-bounds-78.c: New test. * gcc.dg/Warray-bounds-79.c: New test. </cut> Results regressed to (for first_bad == a110855667782dac7b674d3e328b253b3b3c919b) # reset_artifacts: -10 # true: 0 # First few build errors in logs: # 00:05:59 make[3]: [armv8l-unknown-linux-gnueabihf/bits/largefile-config.h] Error 1 (ignored) # 00:11:36 /home/tcwg-buildslave/workspace/tcwg_gnu_0/abe/snapshots/gcc.git~master/gcc/tree.h:1089:58: error: array subscript -1 is outside array bounds of ‘cpp_hashnode [89478485]’ [-Werror=array-bounds] # 00:11:37 /home/tcwg-buildslave/workspace/tcwg_gnu_0/abe/snapshots/gcc.git~master/gcc/tree.h:1089:58: error: array subscript -1 is outside array bounds of ‘cpp_hashnode [89478485]’ [-Werror=array-bounds] # 00:11:37 /home/tcwg-buildslave/workspace/tcwg_gnu_0/abe/snapshots/gcc.git~master/gcc/tree.h:1089:58: error: array subscript -1 is outside array bounds of ‘cpp_hashnode [89478485]’ [-Werror=array-bounds] # 00:12:06 make[3]: *** [cp/module.o] Error 1 # 00:17:43 make[2]: *** [all-stage2-gcc] Error 2 # 00:17:43 make[1]: *** [stage2-bubble] Error 2 # 00:17:43 make: *** [all] Error 2 from (for last_good == 6278065af07634278ba30029d92a82b089969baa) # reset_artifacts: -10 # true: 0 # build_abe bootstrap_debug: 1 Artifacts of last_good build: https://ci.linaro.org/job/tcwg_gcc-bisect-gnu-master-arm-bootstrap_debug/13… Artifacts of first_bad build: https://ci.linaro.org/job/tcwg_gcc-bisect-gnu-master-arm-bootstrap_debug/13… Build top page/logs: https://ci.linaro.org/job/tcwg_gcc-bisect-gnu-master-arm-bootstrap_debug/13/ Configuration details: Reproduce builds: <cut> mkdir investigate-gcc-a110855667782dac7b674d3e328b253b3b3c919b cd investigate-gcc-a110855667782dac7b674d3e328b253b3b3c919b git clone https://git.linaro.org/toolchain/jenkins-scripts mkdir -p artifacts/manifests curl -o artifacts/manifests/build-baseline.sh https://ci.linaro.org/job/tcwg_gcc-bisect-gnu-master-arm-bootstrap_debug/13… --fail curl -o artifacts/manifests/build-parameters.sh https://ci.linaro.org/job/tcwg_gcc-bisect-gnu-master-arm-bootstrap_debug/13… --fail curl -o artifacts/test.sh https://ci.linaro.org/job/tcwg_gcc-bisect-gnu-master-arm-bootstrap_debug/13… --fail chmod +x artifacts/test.sh # Reproduce the baseline build (build all pre-requisites) ./jenkins-scripts/tcwg_gnu-build.sh @@ artifacts/manifests/build-baseline.sh cd gcc # Reproduce first_bad build git checkout --detach a110855667782dac7b674d3e328b253b3b3c919b ../artifacts/test.sh # Reproduce last_good build git checkout --detach 6278065af07634278ba30029d92a82b089969baa ../artifacts/test.sh cd .. </cut> History of pending regressions and results: https://git.linaro.org/toolchain/ci/base-artifacts.git/log/?h=linaro-local/… Artifacts: https://ci.linaro.org/job/tcwg_gcc-bisect-gnu-master-arm-bootstrap_debug/13… Build log: https://ci.linaro.org/job/tcwg_gcc-bisect-gnu-master-arm-bootstrap_debug/13… Full commit (up to 1000 lines): <cut> commit a110855667782dac7b674d3e328b253b3b3c919b Author: Martin Sebor <msebor(a)redhat.com> Date: Wed Jul 7 14:05:25 2021 -0600 Correct handling of variable offset minus constant in -Warray-bounds [PR100137] Resolves: PR tree-optimization/100137 - -Warray-bounds false positive on varying offset plus negative PR tree-optimization/99121 - ICE in -Warray-bounds on a multidimensional PR tree-optimization/97027 - missing warning on buffer overflow storing a larger scalar into a smaller array gcc/ChangeLog: PR tree-optimization/100137 PR tree-optimization/99121 PR tree-optimization/97027 * builtins.c (access_ref::access_ref): Also set offmax. (access_ref::offset_in_range): Define new function. (access_ref::add_offset): Set offmax. (access_ref::inform_access): Handle access_none. (handle_mem_ref): Clear ostype. (compute_objsize_r): Handle ASSERT_EXPR. * builtins.h (struct access_ref): Add offmax member. * gimple-array-bounds.cc (array_bounds_checker::check_mem_ref): Use compute_objsize() and simplify. gcc/testsuite/ChangeLog: PR tree-optimization/100137 PR tree-optimization/99121 PR tree-optimization/97027 * c-c++-common/Warray-bounds-3.c: Remove xfail * c-c++-common/Warray-bounds-4.c: Add an expected warning. * c-c++-common/Warray-bounds-9.c: New test. * c-c++-common/Warray-bounds-10.c: New test. * g++.dg/asan/asan_test.C: Suppress expected warnings. * g++.dg/pr95768.C: Same. * g++.dg/warn/Warray-bounds-10.C: Adjust text of expected messages. * g++.dg/warn/Warray-bounds-11.C: Same. * g++.dg/warn/Warray-bounds-12.C: Same. * g++.dg/warn/Warray-bounds-13.C: Same. * g++.dg/warn/Warray-bounds-17.C: Same. * g++.dg/warn/Warray-bounds-20.C: Same. * gcc.dg/Warray-bounds-29.c: Same. * gcc.dg/Warray-bounds-30.c: Add xfail. * gcc.dg/Warray-bounds-31.c: Adjust text of expected messages. * gcc.dg/Warray-bounds-32.c: Same. * gcc.dg/Warray-bounds-52.c: Same. * gcc.dg/Warray-bounds-53.c: Same. * gcc.dg/Warray-bounds-58.c: Remove xfail. * gcc.dg/Warray-bounds-63.c: Adjust text of expected messages. * gcc.dg/Warray-bounds-66.c: Same. * gcc.dg/Warray-bounds-69.c: Same. * gcc.dg/Wstringop-overflow-34.c: Same. * gcc.dg/Wstringop-overflow-47.c: Same. * gcc.dg/Wstringop-overflow-61.c: Same. * gcc.dg/Warray-bounds-77.c: New test. * gcc.dg/Warray-bounds-78.c: New test. * gcc.dg/Warray-bounds-79.c: New test. --- gcc/builtins.c | 69 +++++- gcc/builtins.h | 5 + gcc/gimple-array-bounds.cc | 336 ++++---------------------- gcc/testsuite/c-c++-common/Warray-bounds-10.c | 114 +++++++++ gcc/testsuite/c-c++-common/Warray-bounds-3.c | 4 +- gcc/testsuite/c-c++-common/Warray-bounds-4.c | 12 +- gcc/testsuite/c-c++-common/Warray-bounds-9.c | 144 +++++++++++ gcc/testsuite/g++.dg/asan/asan_test.C | 2 +- gcc/testsuite/g++.dg/pr95768.C | 2 +- gcc/testsuite/g++.dg/warn/Warray-bounds-10.C | 4 +- gcc/testsuite/g++.dg/warn/Warray-bounds-11.C | 4 +- gcc/testsuite/g++.dg/warn/Warray-bounds-12.C | 4 +- gcc/testsuite/g++.dg/warn/Warray-bounds-13.C | 4 +- gcc/testsuite/g++.dg/warn/Warray-bounds-17.C | 2 +- gcc/testsuite/g++.dg/warn/Warray-bounds-20.C | 8 +- gcc/testsuite/gcc.dg/Warray-bounds-29.c | 22 +- gcc/testsuite/gcc.dg/Warray-bounds-30.c | 2 +- gcc/testsuite/gcc.dg/Warray-bounds-31.c | 8 +- gcc/testsuite/gcc.dg/Warray-bounds-32.c | 26 +- gcc/testsuite/gcc.dg/Warray-bounds-52.c | 6 +- gcc/testsuite/gcc.dg/Warray-bounds-53.c | 6 +- gcc/testsuite/gcc.dg/Warray-bounds-58.c | 2 +- gcc/testsuite/gcc.dg/Warray-bounds-63.c | 6 +- gcc/testsuite/gcc.dg/Warray-bounds-66.c | 12 +- gcc/testsuite/gcc.dg/Warray-bounds-69.c | 2 +- gcc/testsuite/gcc.dg/Warray-bounds-77.c | 135 +++++++++++ gcc/testsuite/gcc.dg/Warray-bounds-78.c | 109 +++++++++ gcc/testsuite/gcc.dg/Warray-bounds-79.c | 112 +++++++++ gcc/testsuite/gcc.dg/Wstringop-overflow-34.c | 8 +- gcc/testsuite/gcc.dg/Wstringop-overflow-47.c | 14 +- gcc/testsuite/gcc.dg/Wstringop-overflow-61.c | 4 +- 31 files changed, 817 insertions(+), 371 deletions(-) diff --git a/gcc/builtins.c b/gcc/builtins.c index e52fe4291c8..39ab139b7e1 100644 --- a/gcc/builtins.c +++ b/gcc/builtins.c @@ -206,6 +206,7 @@ access_ref::access_ref (tree bound /* = NULL_TREE */, { /* Set to valid. */ offrng[0] = offrng[1] = 0; + offmax[0] = offmax[1] = 0; /* Invalidate. */ sizrng[0] = sizrng[1] = -1; @@ -457,6 +458,21 @@ access_ref::size_remaining (offset_int *pmin /* = NULL */) const return sizrng[1] - or0; } +/* Return true if the offset and object size are in range for SIZE. */ + +bool +access_ref::offset_in_range (const offset_int &size) const +{ + if (size_remaining () < size) + return false; + + if (base0) + return offmax[0] >= 0 && offmax[1] <= sizrng[1]; + + offset_int maxoff = wi::to_offset (TYPE_MAX_VALUE (ptrdiff_type_node)); + return offmax[0] > -maxoff && offmax[1] < maxoff; +} + /* Add the range [MIN, MAX] to the offset range. For known objects (with zero-based offsets) at least one of whose offset's bounds is in range, constrain the other (or both) to the bounds of the object (i.e., zero @@ -493,6 +509,8 @@ void access_ref::add_offset (const offset_int &min, const offset_int &max) if (max >= 0) { offrng[0] = 0; + if (offmax[0] > 0) + offmax[0] = 0; return; } @@ -509,6 +527,12 @@ void access_ref::add_offset (const offset_int &min, const offset_int &max) offrng[0] = 0; } + /* Set the minimum and maximmum computed so far. */ + if (offrng[1] < 0 && offrng[1] < offmax[0]) + offmax[0] = offrng[1]; + if (offrng[0] > 0 && offrng[0] > offmax[1]) + offmax[1] = offrng[0]; + if (!base0) return; @@ -4571,23 +4595,46 @@ access_ref::inform_access (access_mode mode) const return; } + if (mode == access_read_only) + { + if (allocfn == NULL_TREE) + { + if (*offstr) + inform (loc, "at offset %s into source object %qE of size %s", + offstr, ref, sizestr); + else + inform (loc, "source object %qE of size %s", ref, sizestr); + + return; + } + + if (*offstr) + inform (loc, + "at offset %s into source object of size %s allocated by %qE", + offstr, sizestr, allocfn); + else + inform (loc, "source object of size %s allocated by %qE", + sizestr, allocfn); + return; + } + if (allocfn == NULL_TREE) { if (*offstr) - inform (loc, "at offset %s into source object %qE of size %s", + inform (loc, "at offset %s into object %qE of size %s", offstr, ref, sizestr); else - inform (loc, "source object %qE of size %s", ref, sizestr); + inform (loc, "object %qE of size %s", ref, sizestr); return; } if (*offstr) inform (loc, - "at offset %s into source object of size %s allocated by %qE", + "at offset %s into object of size %s allocated by %qE", offstr, sizestr, allocfn); else - inform (loc, "source object of size %s allocated by %qE", + inform (loc, "object of size %s allocated by %qE", sizestr, allocfn); } @@ -5433,16 +5480,16 @@ handle_mem_ref (tree mref, int ostype, access_ref *pref, if (VECTOR_TYPE_P (TREE_TYPE (mref))) { - /* Hack: Give up for MEM_REFs of vector types; those may be - synthesized from multiple assignments to consecutive data - members (see PR 93200 and 96963). + /* Hack: Handle MEM_REFs of vector types as those to complete + objects; those may be synthesized from multiple assignments + to consecutive data members (see PR 93200 and 96963). FIXME: Vectorized assignments should only be present after vectorization so this hack is only necessary after it has run and could be avoided in calls from prior passes (e.g., tree-ssa-strlen.c). FIXME: Deal with this more generally, e.g., by marking up such MEM_REFs at the time they're created. */ - return false; + ostype = 0; } tree mrefop = TREE_OPERAND (mref, 0); @@ -5796,6 +5843,12 @@ compute_objsize_r (tree ptr, int ostype, access_ref *pref, tree rhs = gimple_assign_rhs1 (stmt); + if (code == ASSERT_EXPR) + { + rhs = TREE_OPERAND (rhs, 0); + return compute_objsize_r (rhs, ostype, pref, snlim, qry); + } + if (code == POINTER_PLUS_EXPR && TREE_CODE (TREE_TYPE (rhs)) == POINTER_TYPE) { diff --git a/gcc/builtins.h b/gcc/builtins.h index e71f40c300a..a64ece3f1cd 100644 --- a/gcc/builtins.h +++ b/gcc/builtins.h @@ -222,6 +222,9 @@ struct access_ref argument to the minimum. */ offset_int size_remaining (offset_int * = NULL) const; +/* Return true if the offset and object size are in range for SIZE. */ + bool offset_in_range (const offset_int &) const; + /* Return true if *THIS is an access to a declared object. */ bool ref_declared () const { @@ -261,6 +264,8 @@ struct access_ref /* Range of byte offsets into and sizes of the object(s). */ offset_int offrng[2]; offset_int sizrng[2]; + /* The minimum and maximum offset computed. */ + offset_int offmax[2]; /* Range of the bound of the access: denotes that the access is at least BNDRNG[0] bytes but no more than BNDRNG[1]. For string functions the size of the actual access is diff --git a/gcc/gimple-array-bounds.cc b/gcc/gimple-array-bounds.cc index 13f08685f8f..83b8db9755e 100644 --- a/gcc/gimple-array-bounds.cc +++ b/gcc/gimple-array-bounds.cc @@ -414,269 +414,72 @@ array_bounds_checker::check_mem_ref (location_t location, tree ref, if (warning_suppressed_p (ref, OPT_Warray_bounds)) return false; - tree arg = TREE_OPERAND (ref, 0); - /* The constant and variable offset of the reference. */ - tree cstoff = TREE_OPERAND (ref, 1); - tree varoff = NULL_TREE; - - const offset_int maxobjsize = tree_to_shwi (max_object_size ()); - - /* The zero-based array or string constant bounds in bytes. Initially - set to [-MAXOBJSIZE - 1, MAXOBJSIZE] until a tighter bound is - determined. */ - offset_int arrbounds[2] = { -maxobjsize - 1, maxobjsize }; - - /* The minimum and maximum intermediate offset. For a reference - to be valid, not only does the final offset/subscript must be - in bounds but all intermediate offsets should be as well. - GCC may be able to deal gracefully with such out-of-bounds - offsets so the checking is only enabled at -Warray-bounds=2 - where it may help detect bugs in uses of the intermediate - offsets that could otherwise not be detectable. */ - offset_int ioff = wi::to_offset (fold_convert (ptrdiff_type_node, cstoff)); - offset_int extrema[2] = { 0, wi::abs (ioff) }; - - /* The range of the byte offset into the reference. */ - offset_int offrange[2] = { 0, 0 }; - /* The statement used to allocate the array or null. */ gimple *alloc_stmt = NULL; /* For an allocation statement, the low bound of the size range. */ offset_int minbound = 0; + /* The type and size of the access. */ + tree axstype = TREE_TYPE (ref); + offset_int axssize = 0; + if (TREE_CODE (axstype) != UNION_TYPE) + if (tree access_size = TYPE_SIZE_UNIT (axstype)) + if (TREE_CODE (access_size) == INTEGER_CST) + axssize = wi::to_offset (access_size); - /* Determine the offsets and increment OFFRANGE for the bounds of each. - The loop computes the range of the final offset for expressions such - as (A + i0 + ... + iN)[CSTOFF] where i0 through iN are SSA_NAMEs in - some range. */ - const unsigned limit = param_ssa_name_def_chain_limit; - for (unsigned n = 0; TREE_CODE (arg) == SSA_NAME && n < limit; ++n) - { - gimple *def = SSA_NAME_DEF_STMT (arg); - if (is_gimple_call (def)) - { - /* Determine the byte size of the array from an allocation call. */ - wide_int sizrng[2]; - if (gimple_call_alloc_size (def, sizrng)) - { - arrbounds[0] = 0; - arrbounds[1] = offset_int::from (sizrng[1], UNSIGNED); - minbound = offset_int::from (sizrng[0], UNSIGNED); - alloc_stmt = def; - } - break; - } - - if (gimple_nop_p (def)) - { - /* For a function argument try to determine the byte size - of the array from the current function declaratation - (e.g., attribute access or related). */ - wide_int wr[2]; - tree ref = gimple_parm_array_size (arg, wr); - if (!ref) - break; - arrbounds[0] = offset_int::from (wr[0], UNSIGNED); - arrbounds[1] = offset_int::from (wr[1], UNSIGNED); - arg = ref; - break; - } - - if (!is_gimple_assign (def)) - break; - - tree_code code = gimple_assign_rhs_code (def); - if (code == POINTER_PLUS_EXPR) - { - arg = gimple_assign_rhs1 (def); - varoff = gimple_assign_rhs2 (def); - } - else if (code == ASSERT_EXPR) - { - arg = TREE_OPERAND (gimple_assign_rhs1 (def), 0); - continue; - } - else - return false; - - /* VAROFF should always be a SSA_NAME here (and not even - INTEGER_CST) but there's no point in taking chances. */ - if (TREE_CODE (varoff) != SSA_NAME) - break; - - const value_range* const vr = get_value_range (varoff); - if (!vr || vr->undefined_p () || vr->varying_p ()) - break; - - if (!vr->constant_p ()) - break; - - if (vr->kind () == VR_RANGE) - { - offset_int min - = wi::to_offset (fold_convert (ptrdiff_type_node, vr->min ())); - offset_int max - = wi::to_offset (fold_convert (ptrdiff_type_node, vr->max ())); - if (min < max) - { - offrange[0] += min; - offrange[1] += max; - } - else - { - /* When MIN >= MAX, the offset is effectively in a union - of two ranges: [-MAXOBJSIZE -1, MAX] and [MIN, MAXOBJSIZE]. - Since there is no way to represent such a range across - additions, conservatively add [-MAXOBJSIZE -1, MAXOBJSIZE] - to OFFRANGE. */ - offrange[0] += arrbounds[0]; - offrange[1] += arrbounds[1]; - } - } - else - { - /* For an anti-range, analogously to the above, conservatively - add [-MAXOBJSIZE -1, MAXOBJSIZE] to OFFRANGE. */ - offrange[0] += arrbounds[0]; - offrange[1] += arrbounds[1]; - } - - /* Keep track of the minimum and maximum offset. */ - if (offrange[1] < 0 && offrange[1] < extrema[0]) - extrema[0] = offrange[1]; - if (offrange[0] > 0 && offrange[0] > extrema[1]) - extrema[1] = offrange[0]; - - if (offrange[0] < arrbounds[0]) - offrange[0] = arrbounds[0]; - - if (offrange[1] > arrbounds[1]) - offrange[1] = arrbounds[1]; - } + access_ref aref; + if (!compute_objsize (ref, 1, &aref, ranges)) + return false; - tree reftype = NULL_TREE; - offset_int eltsize = -1; - if (arrbounds[0] >= 0) - { - /* The byte size of the array has already been determined above - based on a pointer ARG. Set ELTSIZE to the size of the type - it points to and REFTYPE to the array with the size, rounded - down as necessary. */ - reftype = TREE_TYPE (TREE_TYPE (arg)); - if (TREE_CODE (reftype) == ARRAY_TYPE) - reftype = TREE_TYPE (reftype); - if (tree refsize = TYPE_SIZE_UNIT (reftype)) - if (TREE_CODE (refsize) == INTEGER_CST) - eltsize = wi::to_offset (refsize); - - if (eltsize < 0) - return false; + if (aref.offset_in_range (axssize)) + return false; - offset_int nelts = arrbounds[1] / eltsize; - reftype = build_printable_array_type (reftype, nelts.to_uhwi ()); - } - else if (TREE_CODE (arg) == ADDR_EXPR) + if (TREE_CODE (aref.ref) == SSA_NAME) { - arg = TREE_OPERAND (arg, 0); - if (TREE_CODE (arg) != STRING_CST - && TREE_CODE (arg) != PARM_DECL - && TREE_CODE (arg) != VAR_DECL) - return false; - - /* The type of the object being referred to. It can be an array, - string literal, or a non-array type when the MEM_REF represents - a reference/subscript via a pointer to an object that is not - an element of an array. Incomplete types are excluded as well - because their size is not known. */ - reftype = TREE_TYPE (arg); - if (POINTER_TYPE_P (reftype) - || !COMPLETE_TYPE_P (reftype) - || TREE_CODE (TYPE_SIZE_UNIT (reftype)) != INTEGER_CST) - return false; - - /* Except in declared objects, references to trailing array members - of structs and union objects are excluded because MEM_REF doesn't - make it possible to identify the member where the reference - originated. */ - if (RECORD_OR_UNION_TYPE_P (reftype) - && (!VAR_P (arg) - || (DECL_EXTERNAL (arg) && array_at_struct_end_p (ref)))) - return false; - - /* FIXME: Should this be 1 for Fortran? */ - arrbounds[0] = 0; - - if (TREE_CODE (reftype) == ARRAY_TYPE) - { - /* Set to the size of the array element (and adjust below). */ - eltsize = wi::to_offset (TYPE_SIZE_UNIT (TREE_TYPE (reftype))); - /* Use log2 of size to convert the array byte size in to its - upper bound in elements. */ - const offset_int eltsizelog2 = wi::floor_log2 (eltsize); - if (tree dom = TYPE_DOMAIN (reftype)) - { - tree bnds[] = { TYPE_MIN_VALUE (dom), TYPE_MAX_VALUE (dom) }; - if (TREE_CODE (arg) == COMPONENT_REF) - { - offset_int size = maxobjsize; - if (tree fldsize = component_ref_size (arg)) - size = wi::to_offset (fldsize); - arrbounds[1] = wi::lrshift (size, eltsizelog2); - } - else if (array_at_struct_end_p (arg) || !bnds[0] || !bnds[1]) - arrbounds[1] = wi::lrshift (maxobjsize, eltsizelog2); - else - arrbounds[1] = (wi::to_offset (bnds[1]) - wi::to_offset (bnds[0]) - + 1) * eltsize; - } - else - arrbounds[1] = wi::lrshift (maxobjsize, eltsizelog2); - - /* Determine a tighter bound of the non-array element type. */ - tree eltype = TREE_TYPE (reftype); - while (TREE_CODE (eltype) == ARRAY_TYPE) - eltype = TREE_TYPE (eltype); - eltsize = wi::to_offset (TYPE_SIZE_UNIT (eltype)); - } - else + gimple *def = SSA_NAME_DEF_STMT (aref.ref); + if (is_gimple_call (def)) { - eltsize = 1; - tree size = TYPE_SIZE_UNIT (reftype); - if (VAR_P (arg)) - if (tree initsize = DECL_SIZE_UNIT (arg)) - if (tree_int_cst_lt (size, initsize)) - size = initsize; - - arrbounds[1] = wi::to_offset (size); + /* Save the allocation call and the low bound on the size. */ + alloc_stmt = def; + minbound = aref.sizrng[0]; } } - else - return false; - - offrange[0] += ioff; - offrange[1] += ioff; + + /* The range of the byte offset into the reference. Adjusted below. */ + offset_int offrange[2] = { aref.offrng[0], aref.offrng[1] }; + + /* The type of the referenced object. */ + tree reftype = TREE_TYPE (aref.ref); + /* The size of the referenced array element. */ + offset_int eltsize = 1; + /* The byte size of the array has already been determined above + based on a pointer ARG. Set ELTSIZE to the size of the type + it points to and REFTYPE to the array with the size, rounded + down as necessary. */ + if (POINTER_TYPE_P (reftype)) + reftype = TREE_TYPE (reftype); + if (TREE_CODE (reftype) == ARRAY_TYPE) + reftype = TREE_TYPE (reftype); + if (tree refsize = TYPE_SIZE_UNIT (reftype)) + if (TREE_CODE (refsize) == INTEGER_CST) + eltsize = wi::to_offset (refsize); + + const offset_int nelts = aref.sizrng[1] / eltsize; + reftype = build_printable_array_type (reftype, nelts.to_uhwi ()); /* Compute the more permissive upper bound when IGNORE_OFF_BY_ONE is set (when taking the address of the one-past-last element of an array) but always use the stricter bound in diagnostics. */ - offset_int ubound = arrbounds[1]; + offset_int ubound = aref.sizrng[1]; if (ignore_off_by_one) ubound += eltsize; - bool warned = false; /* Set if the lower bound of the subscript is out of bounds. */ - const bool lboob = (arrbounds[0] == arrbounds[1] + const bool lboob = (aref.sizrng[1] == 0 || offrange[0] >= ubound - || offrange[1] < arrbounds[0]); + || offrange[1] < 0); /* Set if only the upper bound of the subscript is out of bounds. This can happen when using a bigger type to index into an array of a smaller type, as is common with unsigned char. */ - tree axstype = TREE_TYPE (ref); - offset_int axssize = 0; - if (TREE_CODE (axstype) != UNION_TYPE) - if (tree access_size = TYPE_SIZE_UNIT (axstype)) - if (TREE_CODE (access_size) == INTEGER_CST) - axssize = wi::to_offset (access_size); - const bool uboob = !lboob && offrange[0] + axssize > ubound; if (lboob || uboob) { @@ -689,9 +492,7 @@ array_bounds_checker::check_mem_ref (location_t location, tree ref, to compute the index to print in the diagnostic; arrays in MEM_REF don't mean anything. A type with no size like void is as good as having a size of 1. */ - tree type = TREE_TYPE (ref); - while (TREE_CODE (type) == ARRAY_TYPE) - type = TREE_TYPE (type); + tree type = strip_array_types (TREE_TYPE (ref)); if (tree size = TYPE_SIZE_UNIT (type)) { offrange[0] = offrange[0] / wi::to_offset (size); @@ -699,6 +500,7 @@ array_bounds_checker::check_mem_ref (location_t location, tree ref, } } + bool warned = false; if (lboob) { if (offrange[0] == offrange[1]) @@ -720,7 +522,7 @@ array_bounds_checker::check_mem_ref (location_t location, tree ref, /* If the memory was dynamically allocated refer to it as if it were an untyped array of bytes. */ backtype = build_array_type_nelts (unsigned_char_type_node, - arrbounds[1].to_uhwi ()); + aref.sizrng[1].to_uhwi ()); warned = warning_at (location, OPT_Warray_bounds, "array subscript %<%T[%wi]%> is partly " @@ -730,46 +532,8 @@ array_bounds_checker::check_mem_ref (location_t location, tree ref, if (warned) { - if (DECL_P (arg)) - inform (DECL_SOURCE_LOCATION (arg), "while referencing %qD", arg); - else if (alloc_stmt) - { - location_t loc = gimple_location (alloc_stmt); - if (gimple_call_builtin_p (alloc_stmt, BUILT_IN_ALLOCA_WITH_ALIGN)) - { - if (minbound == arrbounds[1]) - inform (loc, "referencing a variable length array " - "of size %wu", minbound.to_uhwi ()); - else - inform (loc, "referencing a variable length array " - "of size between %wu and %wu", - minbound.to_uhwi (), arrbounds[1].to_uhwi ()); - } - else if (tree fndecl = gimple_call_fndecl (alloc_stmt)) - { - if (minbound == arrbounds[1]) - inform (loc, "referencing an object of size %wu " - "allocated by %qD", - minbound.to_uhwi (), fndecl); - else - inform (loc, "referencing an object of size between " - "%wu and %wu allocated by %qD", - minbound.to_uhwi (), arrbounds[1].to_uhwi (), fndecl); - } - else - { - tree fntype = gimple_call_fntype (alloc_stmt); - if (minbound == arrbounds[1]) - inform (loc, "referencing an object of size %wu " - "allocated by %qT", - minbound.to_uhwi (), fntype); - else - inform (loc, "referencing an object of size between " - "%wu and %wu allocated by %qT", - minbound.to_uhwi (), arrbounds[1].to_uhwi (), fntype); - } - } - + /* TODO: Determine the access from the statement and use it. */ + aref.inform_access (access_none); suppress_warning (ref, OPT_Warray_bounds); return true; } @@ -779,9 +543,9 @@ array_bounds_checker::check_mem_ref (location_t location, tree ref, /* At level 2 check also intermediate offsets. */ int i = 0; - if (extrema[i] < -arrbounds[1] || extrema[i = 1] > ubound) + if (aref.offmax[i] < -aref.sizrng[1] || aref.offmax[i = 1] > ubound) { - HOST_WIDE_INT tmpidx = extrema[i].to_shwi () / eltsize.to_shwi (); + HOST_WIDE_INT tmpidx = aref.offmax[i].to_shwi () / eltsize.to_shwi (); if (warning_at (location, OPT_Warray_bounds, "intermediate array offset %wi is outside array bounds " diff --git a/gcc/testsuite/c-c++-common/Warray-bounds-10.c b/gcc/testsuite/c-c++-common/Warray-bounds-10.c new file mode 100644 index 00000000000..cfe9a383410 --- /dev/null +++ b/gcc/testsuite/c-c++-common/Warray-bounds-10.c @@ -0,0 +1,114 @@ +/* PR tree-optimization/99475 - bogus -Warray-bounds accessing an array + element of empty structs + { dg-do compile } + { dg-options "-O2 -Wall" } */ + +struct S +{ +#if SOME_CONFIG_MACRO + /* Suppose the contents are empty in the development configuration + but non-empty in others. Out of bounds accesses to elements of + the arrays below should be diagnosed in all configurations, + including when S is empty, even if they are folded away. */ + int member; +#endif +}; + +extern struct S sa3[3]; +extern struct S sa2_3[2][3]; +extern struct S sa3_4_5[3][4][5]; + +void sink (void*); + + +void access_sa3 (struct S s) +{ + sa3[0] = s; + sa3[1] = s; + sa3[2] = s; + sa3[3] = s; // { dg-warning "\\\[-Warray-bounds" "pr?????" { xfail *-*-* } } +} + +void access_sa3_ptr (struct S s) +{ + struct S *p = &sa3[0]; + + p[0] = s; // { dg-bogus "\\\[-Warray-bounds" } + p[1] = s; // { dg-bogus "\\\[-Warray-bounds" } + p[2] = s; // { dg-bogus "\\\[-Warray-bounds" } + p[3] = s; // { dg-warning "\\\[-Warray-bounds" "pr?????" { xfail *-*-* } } +} + +void access_sa2_3_ptr (struct S s) +{ + struct S *p = &sa2_3[0][0]; + + p[0] = s; // { dg-bogus "\\\[-Warray-bounds" } + p[1] = s; // { dg-bogus "\\\[-Warray-bounds" } + p[2] = s; // { dg-bogus "\\\[-Warray-bounds" } + p[6] = s; // { dg-warning "\\\[-Warray-bounds" "pr?????" { xfail *-*-* } } +} + +void access_sa3_4_5_ptr (struct S s, int i) +{ + struct S *p = &sa3_4_5[0][0][0]; + + p[0] = s; // { dg-bogus "\\\[-Warray-bounds" } + p[1] = s; // { dg-bogus "\\\[-Warray-bounds" } + p[2] = s; // { dg-bogus "\\\[-Warray-bounds" } + p[60] = s; // { dg-warning "\\\[-Warray-bounds" "pr?????" { xfail *-*-* } } +} + + +void access_vla3 (struct S s, unsigned n) +{ + struct S vla3[3 < n ? 3 : n]; + + vla3[0] = s; + vla3[1] = s; + vla3[2] = s; + vla3[3] = s; // { dg-warning "\\\[-Warray-bounds" "pr?????" { xfail *-*-* } } + + sink (vla3); +} + +void access_vla3_ptr (struct S s, unsigned n) +{ + struct S vla3[3 < n ? 3 : n]; + struct S *p = &vla3[0]; + + p[0] = s; // { dg-bogus "\\\[-Warray-bounds" } + p[1] = s; // { dg-bogus "\\\[-Warray-bounds" } + p[2] = s; // { dg-bogus "\\\[-Warray-bounds" } + p[3] = s; // { dg-warning "\\\[-Warray-bounds" "pr?????" { xfail *-*-* } } + + sink (vla3); +} + +void access_vla2_3_ptr (struct S s, unsigned n) +{ + struct S vla2_3[2 < n ? 2 : n][3 < n ? 3 : n]; + struct S *p = &vla2_3[0][0]; + + p[0] = s; // { dg-bogus "\\\[-Warray-bounds" } + p[1] = s; // { dg-bogus "\\\[-Warray-bounds" } + p[2] = s; // { dg-bogus "\\\[-Warray-bounds" } + p[6] = s; // { dg-warning "\\\[-Warray-bounds" "pr?????" { xfail *-*-* } } + + sink (vla2_3); +} + +void access_vla3_4_5_ptr (struct S s, unsigned n) +{ + struct S vla3_4_5[3 < n ? 3 : n][4 < n ? 4 : n][5 < n ? 5 : n]; + struct S *p = &vla3_4_5[0][0][0]; + + p[0] = s; // { dg-bogus "\\\[-Warray-bounds" } + p[1] = s; // { dg-bogus "\\\[-Warray-bounds" } + p[2] = s; // { dg-bogus "\\\[-Warray-bounds" } + p[60] = s; // { dg-warning "\\\[-Warray-bounds" "pr?????" { xfail *-*-* } } + + sink (vla3_4_5); +} + +// { dg-prune-output "empty struct has size 0 in C" } diff --git a/gcc/testsuite/c-c++-common/Warray-bounds-3.c b/gcc/testsuite/c-c++-common/Warray-bounds-3.c index aae4999ea13..3d7c7687374 100644 --- a/gcc/testsuite/c-c++-common/Warray-bounds-3.c +++ b/gcc/testsuite/c-c++-common/Warray-bounds-3.c @@ -158,7 +158,7 @@ void test_memcpy_overflow (char *d, const char *s, size_t n) but known access size is detected. This works except with small sizes that are powers of 2 due to bug . */ T (char, 1, arr + SR (DIFF_MAX - 1, DIFF_MAX), s, 1); - T (char, 1, arr + SR (DIFF_MAX - 1, DIFF_MAX), s, 2); /* { dg-warning "pointer overflow between offset \\\[\[0-9\]+, \[0-9\]+] and size 2 accessing array " "bug " { xfail non_strict_align } } */ + T (char, 1, arr + SR (DIFF_MAX - 1, DIFF_MAX), s, 2); /* { dg-warning "\\\[-Warray-bounds" } */ T (char, 1, arr + SR (DIFF_MAX - 2, DIFF_MAX), s, 3); /* { dg-warning "pointer overflow between offset \\\[\[0-9\]+, \[0-9\]+] and size 3 accessing array " "memcpy" } */ T (char, 1, arr + SR (DIFF_MAX - 4, DIFF_MAX), s, 5); /* { dg-warning "pointer overflow between offset \\\[\[0-9\]+, \[0-9\]+] and size 5 accessing array " "memcpy" } */ } @@ -178,7 +178,7 @@ void test_memcpy_bounds_memarray_range (void) TM (ma.a5, ma.a5 + i, ma.a5, 1); TM (ma.a5, ma.a5 + i, ma.a5, 3); - TM (ma.a5, ma.a5 + i, ma.a5, 5); + TM (ma.a5, ma.a5 + i, ma.a5, 5); /* { dg-warning "\\\[-Warray-bounds" } */ TM (ma.a5, ma.a5 + i, ma.a5, 7); /* diagnosed with -Warray-bounds=2 */ } diff --git a/gcc/testsuite/c-c++-common/Warray-bounds-4.c b/gcc/testsuite/c-c++-common/Warray-bounds-4.c index 22a23a12651..1f73f11943f 100644 --- a/gcc/testsuite/c-c++-common/Warray-bounds-4.c +++ b/gcc/testsuite/c-c++-common/Warray-bounds-4.c @@ -43,7 +43,17 @@ void test_memcpy_bounds_memarray_range (void) TM (ma.a5, ma.a5 + j, ma.a5, 1); TM (ma.a5, ma.a5 + j, ma.a5, 3); - TM (ma.a5, ma.a5 + j, ma.a5, 5); + + /* The copy below is invalid for two reasons: 1) it overlaps and 2) it + writes past the end of ma.a5. The warning is a little cryptic here + because the GIMPLE is: + _4 = &ma.a5 + prephitmp_14; + MEM <unsigned char[5]> [(char * {ref-all})_4] + = MEM <unsigned char[5]> [(char * {ref-all})&ma]; + and could be improved. Just verify that one is issued but not its + full text. */ + TM (ma.a5, ma.a5 + j, ma.a5, 5); /* { dg-warning "\\\[-Warray-bounds" } */ + TM (ma.a5, ma.a5 + j, ma.a5, 7); /* { dg-warning "offset \\\[5, 7] from the object at .ma. is out of the bounds of referenced subobject .$MA::$?a5. with type .char ?\\\[5]. at offset 0" } */ TM (ma.a5, ma.a5 + j, ma.a5, 9); /* { dg-warning "offset \\\[5, 9] from the object at .ma. is out of the bounds of referenced subobject .$MA::$?a5. with type .char ?\\\[5]. at offset 0" } */ } diff --git a/gcc/testsuite/c-c++-common/Warray-bounds-9.c b/gcc/testsuite/c-c++-common/Warray-bounds-9.c new file mode 100644 index 00000000000..be05775fa91 --- /dev/null +++ b/gcc/testsuite/c-c++-common/Warray-bounds-9.c @@ -0,0 +1,144 @@ +/* PR tree-optimization/99121 - ICE in -Warray-bounds on a multidimensional + VLA + { dg-do compile } + { dg-options "-O2 -Wall -ftrack-macro-expansion=0" } */ + +#define NOIPA __attribute__ ((noipa)) + +void sink (void*, ...); +#define T(a, x) sink (a, x) + + +NOIPA void a_0_n (int n) +{ + int a[0][n]; + + sink (a); + + T (a, ((int *) a)[0]); // { dg-warning "\\\[-Warray-bounds" } + T (a, ((char *) a)[1]); // { dg-warning "\\\[-Warray-bounds" } + T (a, ((float *) a)[n]); // { dg-warning "\\\[-Warray-bounds" } +} + +NOIPA void a_n_0 (int n) +{ + int a[n][0]; + + sink (a); + + T (a, ((int *) a)[0]); // { dg-warning "\\\[-Warray-bounds" } + T (a, ((char *) a)[1]); // { dg-warning "\\\[-Warray-bounds" } + T (a, ((float *) a)[n]); // { dg-warning "\\\[-Warray-bounds" } +} + + +NOIPA void a_1_n_0 (int n) +{ + int a[1][n][0]; + + sink (a); + + T (a, ((int *) a)[0]); // { dg-warning "\\\[-Warray-bounds" } + T (a, ((char *) a)[1]); // { dg-warning "\\\[-Warray-bounds" } + T (a, ((float *) a)[n]); // { dg-warning "\\\[-Warray-bounds" } +} + +NOIPA void a_1_0_n (int n) +{ + int a[1][0][n]; + + sink (a); + + T (a, ((int *) a)[0]); // { dg-warning "\\\[-Warray-bounds" } + T (a, ((char *) a)[1]); // { dg-warning "\\\[-Warray-bounds" } + T (a, ((float *) a)[n]); // { dg-warning "\\\[-Warray-bounds" } +} + +NOIPA void a_0_1_n (int n) +{ + int a[0][1][n]; + + sink (a); + + T (a, ((int *) a)[0]); // { dg-warning "\\\[-Warray-bounds" } + T (a, ((char *) a)[1]); // { dg-warning "\\\[-Warray-bounds" } + T (a, ((float *) a)[n]); // { dg-warning "\\\[-Warray-bounds" } +} + +NOIPA void a_0_n_1 (int n) +{ + int a[0][n][1]; + + sink (a); + + T (a, ((int *) a)[0]); // { dg-warning "\\\[-Warray-bounds" } + T (a, ((char *) a)[1]); // { dg-warning "\\\[-Warray-bounds" } + T (a, ((float *) a)[n]); // { dg-warning "\\\[-Warray-bounds" } +} + +NOIPA void a_n_0_n (int n) +{ + int a[n][0][n]; + + sink (a); + + T (a, ((int *) a)[0]); // { dg-warning "\\\[-Warray-bounds" } + T (a, ((char *) a)[1]); // { dg-warning "\\\[-Warray-bounds" } + T (a, ((float *) a)[n]); // { dg-warning "\\\[-Warray-bounds" } +} + +NOIPA void a_n_n_0 (int n) +{ + int a[n][n][0]; + + sink (a); + + T (a, ((int *) a)[0]); // { dg-warning "\\\[-Warray-bounds" } + T (a, ((char *) a)[1]); // { dg-warning "\\\[-Warray-bounds" } + T (a, ((float *) a)[n]); // { dg-warning "\\\[-Warray-bounds" } +} + +NOIPA void a_0_n_n (int n) +{ + int a[0][n][n]; + + sink (a); + + T (a, ((int *) a)[0]); // { dg-warning "\\\[-Warray-bounds" } + T (a, ((char *) a)[1]); // { dg-warning "\\\[-Warray-bounds" } + T (a, ((float *) a)[n]); // { dg-warning "\\\[-Warray-bounds" } +} + +NOIPA void a_0_0_n (int n) +{ + int a[0][0][n]; + + sink (a); + + T (a, ((int *) a)[0]); // { dg-warning "\\\[-Warray-bounds" } + T (a, ((char *) a)[1]); // { dg-warning "\\\[-Warray-bounds" } + T (a, ((float *) a)[n]); // { dg-warning "\\\[-Warray-bounds" } +} + +NOIPA void a_n_0_0 (int n) +{ + int a[n][0][0]; + + sink (a); + + T (a, ((int *) a)[0]); // { dg-warning "\\\[-Warray-bounds" } + T (a, ((char *) a)[1]); // { dg-warning "\\\[-Warray-bounds" } + T (a, ((float *) a)[n]); // { dg-warning "\\\[-Warray-bounds" } +} + +NOIPA void a_n_n_n (int n) +{ + int a[n][n][n]; + + sink (a); + + T (a, ((int *) a)[-1]); // { dg-warning "\\\[-Warray-bounds" "pr99140" } + T (a, ((int *) a)[0]); + T (a, ((char *) a)[1]); + T (a, ((float *) a)[n]); +} diff --git a/gcc/testsuite/g++.dg/asan/asan_test.C b/gcc/testsuite/g++.dg/asan/asan_test.C index c62568f48ec..49933ab8e4d 100644 --- a/gcc/testsuite/g++.dg/asan/asan_test.C +++ b/gcc/testsuite/g++.dg/asan/asan_test.C @@ -2,7 +2,7 @@ // { dg-skip-if "" { *-*-* } { "*" } { "-O2" } } // { dg-skip-if "" { *-*-* } { "-flto" } { "" } } // { dg-additional-sources "asan_globals_test-wrapper.cc" } -// { dg-options "-std=c++11 -fsanitize=address -fno-builtin -Wall -Werror -Wno-alloc-size-larger-than -Wno-stringop-overflow -g -DASAN_UAR=0 -DASAN_HAS_EXCEPTIONS=1 -DASAN_HAS_BLACKLIST=0 -DSANITIZER_USE_DEJAGNU_GTEST=1 -lasan -lpthread" } +// { dg-options "-std=c++11 -fsanitize=address -fno-builtin -Wall -Werror -Wno-alloc-size-larger-than -Wno-array-bounds -Wno-stringop-overflow -g -DASAN_UAR=0 -DASAN_HAS_EXCEPTIONS=1 -DASAN_HAS_BLACKLIST=0 -DSANITIZER_USE_DEJAGNU_GTEST=1 -lasan -lpthread" } // { dg-additional-options "-ldl" { target { ! *-*-freebsd* } } } // { dg-additional-options "-DASAN_NEEDS_SEGV=1" { target { ! arm*-*-* } } } // { dg-additional-options "-DASAN_LOW_MEMORY=1 -DASAN_NEEDS_SEGV=0" { target arm*-*-* } } diff --git a/gcc/testsuite/g++.dg/pr95768.C b/gcc/testsuite/g++.dg/pr95768.C index 5e2c8c44ad0..d34d5133134 100644 --- a/gcc/testsuite/g++.dg/pr95768.C +++ b/gcc/testsuite/g++.dg/pr95768.C @@ -1,6 +1,6 @@ /* PR c++/95768 - pretty-printer ICE on -Wuninitialized with allocated storage { dg-do compile } - { dg-options "-O2 -Wall" } */ + { dg-options "-O2 -Wall -Wno-array-bounds" } */ </cut>

3 years, 12 months

[CI-NOTIFY]: TCWG Bisect tcwg_cross/gnu-master-aarch64-build_cross - Build # 33 - Successful!

by ci_notify＠linaro.org

Successfully identified regression in *glibc* in CI configuration tcwg_cross/gnu-master-aarch64-build_cross. So far, this commit has regressed CI configurations: - tcwg_cross/gnu-master-aarch64-build_cross Culprit: <cut> commit fab3a6daf137c734e684471e197148aa058102e3 Author: Siddhesh Poyarekar <siddhesh(a)sourceware.org> Date: Wed Jul 7 13:25:49 2021 +0530 tests-exclude-mcheck: Fix typo It's tst-realloc, not tst-posix-realloc. Verified this time to ensure that the total number of tests reduced by 1. Reported-by: Stefan Liebler <stli(a)linux.ibm.com> </cut> Results regressed to (for first_bad == fab3a6daf137c734e684471e197148aa058102e3) # reset_artifacts: -10 # true: 0 # build_abe binutils: 1 # build_abe stage1: 2 # build_abe linux: 3 # First few build errors in logs: # 00:00:14 make[2]: *** [/home/tcwg-buildslave/workspace/tcwg_gnu_1/abe/builds/x86_64-pc-linux-gnu/aarch64-linux-gnu/glibc-glibc.git~master/sysd-rules:499: /home/tcwg-buildslave/workspace/tcwg_gnu_1/abe/builds/x86_64-pc-linux-gnu/aarch64-linux-gnu/glibc-glibc.git~master/csu/start.os] Error 1 # 00:00:14 make[2]: *** [/home/tcwg-buildslave/workspace/tcwg_gnu_1/abe/builds/x86_64-pc-linux-gnu/aarch64-linux-gnu/glibc-glibc.git~master/sysd-rules:483: /home/tcwg-buildslave/workspace/tcwg_gnu_1/abe/builds/x86_64-pc-linux-gnu/aarch64-linux-gnu/glibc-glibc.git~master/csu/crtn.o] Error 1 # 00:00:14 make[2]: *** [/home/tcwg-buildslave/workspace/tcwg_gnu_1/abe/builds/x86_64-pc-linux-gnu/aarch64-linux-gnu/glibc-glibc.git~master/sysd-rules:483: /home/tcwg-buildslave/workspace/tcwg_gnu_1/abe/builds/x86_64-pc-linux-gnu/aarch64-linux-gnu/glibc-glibc.git~master/csu/start.o] Error 1 # 00:00:14 make[2]: *** [/home/tcwg-buildslave/workspace/tcwg_gnu_1/abe/builds/x86_64-pc-linux-gnu/aarch64-linux-gnu/glibc-glibc.git~master/sysd-rules:483: /home/tcwg-buildslave/workspace/tcwg_gnu_1/abe/builds/x86_64-pc-linux-gnu/aarch64-linux-gnu/glibc-glibc.git~master/csu/crti.o] Error 1 # 00:00:14 make[2]: *** [../o-iterator.mk:9: /home/tcwg-buildslave/workspace/tcwg_gnu_1/abe/builds/x86_64-pc-linux-gnu/aarch64-linux-gnu/glibc-glibc.git~master/csu/check_fds.os] Error 1 # 00:00:14 make[2]: *** [../o-iterator.mk:9: /home/tcwg-buildslave/workspace/tcwg_gnu_1/abe/builds/x86_64-pc-linux-gnu/aarch64-linux-gnu/glibc-glibc.git~master/csu/check_fds.o] Error 1 # 00:00:14 ../sysdeps/aarch64/nptl/tls.h:91:19: error: ‘__builtin_thread_pointer’ is not supported on this target # 00:00:14 make[2]: *** [/home/tcwg-buildslave/workspace/tcwg_gnu_1/abe/builds/x86_64-pc-linux-gnu/aarch64-linux-gnu/glibc-glibc.git~master/sysd-rules:485: /home/tcwg-buildslave/workspace/tcwg_gnu_1/abe/builds/x86_64-pc-linux-gnu/aarch64-linux-gnu/glibc-glibc.git~master/csu/libc-tls.o] Error 1 # 00:00:14 ../sysdeps/unix/sysv/linux/aarch64/sysdep.h:190:17: error: invalid register name for ‘_x0’ # 00:00:14 ../sysdeps/unix/sysv/linux/aarch64/sysdep.h:174:22: error: invalid register name for ‘_x8’ from (for last_good == 7a5db2e82fbb6c3a6e3fdae02b7166c5d0e8c7a8) # reset_artifacts: -10 # true: 0 # build_abe binutils: 1 # build_abe stage1: 2 # build_abe linux: 3 # build_abe glibc: 4 # build_abe stage2: 5 # build_abe qemu: 6 Artifacts of last_good build: https://ci.linaro.org/job/tcwg_cross-bisect-gnu-master-aarch64-build_cross/… Artifacts of first_bad build: https://ci.linaro.org/job/tcwg_cross-bisect-gnu-master-aarch64-build_cross/… Build top page/logs: https://ci.linaro.org/job/tcwg_cross-bisect-gnu-master-aarch64-build_cross/… Configuration details: Reproduce builds: <cut> mkdir investigate-glibc-fab3a6daf137c734e684471e197148aa058102e3 cd investigate-glibc-fab3a6daf137c734e684471e197148aa058102e3 git clone https://git.linaro.org/toolchain/jenkins-scripts mkdir -p artifacts/manifests curl -o artifacts/manifests/build-baseline.sh https://ci.linaro.org/job/tcwg_cross-bisect-gnu-master-aarch64-build_cross/… --fail curl -o artifacts/manifests/build-parameters.sh https://ci.linaro.org/job/tcwg_cross-bisect-gnu-master-aarch64-build_cross/… --fail curl -o artifacts/test.sh https://ci.linaro.org/job/tcwg_cross-bisect-gnu-master-aarch64-build_cross/… --fail chmod +x artifacts/test.sh # Reproduce the baseline build (build all pre-requisites) ./jenkins-scripts/tcwg_gnu-build.sh @@ artifacts/manifests/build-baseline.sh cd glibc # Reproduce first_bad build git checkout --detach fab3a6daf137c734e684471e197148aa058102e3 ../artifacts/test.sh # Reproduce last_good build git checkout --detach 7a5db2e82fbb6c3a6e3fdae02b7166c5d0e8c7a8 ../artifacts/test.sh cd .. </cut> History of pending regressions and results: https://git.linaro.org/toolchain/ci/base-artifacts.git/log/?h=linaro-local/… Artifacts: https://ci.linaro.org/job/tcwg_cross-bisect-gnu-master-aarch64-build_cross/… Build log: https://ci.linaro.org/job/tcwg_cross-bisect-gnu-master-aarch64-build_cross/… Full commit (up to 1000 lines): <cut> commit fab3a6daf137c734e684471e197148aa058102e3 Author: Siddhesh Poyarekar <siddhesh(a)sourceware.org> Date: Wed Jul 7 13:25:49 2021 +0530 tests-exclude-mcheck: Fix typo It's tst-realloc, not tst-posix-realloc. Verified this time to ensure that the total number of tests reduced by 1. Reported-by: Stefan Liebler <stli(a)linux.ibm.com> --- malloc/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/malloc/Makefile b/malloc/Makefile index 2af1203a0a..37a9a4efab 100644 --- a/malloc/Makefile +++ b/malloc/Makefile @@ -94,7 +94,7 @@ tests-exclude-mcheck = tst-mallocstate \ tst-malloc_info \ tst-memalign \ tst-posix_memalign \ - tst-posix-realloc + tst-realloc tests-mcheck = $(filter-out $(tests-exclude-mcheck), $(tests)) </cut>

3 years, 12 months

[CI-NOTIFY]: TCWG Bisect tcwg_cross/gnu-master-aarch64-build_cross - Build # 37 - Successful!

by ci_notify＠linaro.org

3 years, 12 months

[CI-NOTIFY]: TCWG Bisect tcwg_bmk_tx1/gnu-release-aarch64-spec2k6-O2 - Build # 15 - Successful!

by ci_notify＠linaro.org

Successfully identified regression in *gcc* in CI configuration tcwg_bmk_gnu_tx1/gnu-release-aarch64-spec2k6-O2. So far, this commit has regressed CI configurations: - tcwg_bmk_gnu_tx1/gnu-release-aarch64-spec2k6-O2 Culprit: <cut> commit a4dfaad2e5594d871fe00a1116005e28f95d644e Author: Richard Sandiford <richard.sandiford(a)arm.com> Date: Mon Sep 30 16:20:44 2019 +0000 Remove global call sets: gcse.c This is another case in which we can conservatively treat partial kills as full kills. Again this is in principle a bug fix for TARGET_HARD_REGNO_CALL_PART_CLOBBERED targets, but in practice it probably doesn't make a difference. 2019-09-30 Richard Sandiford <richard.sandiford(a)arm.com> gcc/ * gcse.c: Include function-abi.h. (compute_hash_table_work): Use insn_callee_abi to get the ABI of the call insn target. Invalidate partially call-clobbered registers as well as fully call-clobbered ones. From-SVN: r276323 </cut> Results regressed to (for first_bad == a4dfaad2e5594d871fe00a1116005e28f95d644e) # reset_artifacts: -10 # build_abe binutils: -9 # build_abe stage1 -- --set gcc_override_configure=--disable-libsanitizer: -8 # build_abe linux: -7 # build_abe glibc: -6 # build_abe stage2 -- --set gcc_override_configure=--disable-libsanitizer: -5 # true: 0 # benchmark -O2 -- artifacts/build-a4dfaad2e5594d871fe00a1116005e28f95d644e/results_id: 1 # 447.dealII,[.] _ZNK12SparseMatrixIdE5vmultI6VectorIdES3_EEvRT regressed by 112 from (for last_good == c1b582720a39c3cb944aaff0298f721cdd034e3f) # reset_artifacts: -10 # build_abe binutils: -9 # build_abe stage1 -- --set gcc_override_configure=--disable-libsanitizer: -8 # build_abe linux: -7 # build_abe glibc: -6 # build_abe stage2 -- --set gcc_override_configure=--disable-libsanitizer: -5 # true: 0 # benchmark -O2 -- artifacts/build-c1b582720a39c3cb944aaff0298f721cdd034e3f/results_id: 1 Artifacts of last_good build: https://ci.linaro.org/job/tcwg_bmk_ci_gnu-bisect-tcwg_bmk_tx1-gnu-release-a… Results ID of last_good: tx1_64/tcwg_bmk_gnu_tx1/bisect-gnu-release-aarch64-spec2k6-O2/1425 Artifacts of first_bad build: https://ci.linaro.org/job/tcwg_bmk_ci_gnu-bisect-tcwg_bmk_tx1-gnu-release-a… Results ID of first_bad: tx1_64/tcwg_bmk_gnu_tx1/bisect-gnu-release-aarch64-spec2k6-O2/1421 Build top page/logs: https://ci.linaro.org/job/tcwg_bmk_ci_gnu-bisect-tcwg_bmk_tx1-gnu-release-a… Configuration details: Reproduce builds: <cut> mkdir investigate-gcc-a4dfaad2e5594d871fe00a1116005e28f95d644e cd investigate-gcc-a4dfaad2e5594d871fe00a1116005e28f95d644e git clone https://git.linaro.org/toolchain/jenkins-scripts mkdir -p artifacts/manifests curl -o artifacts/manifests/build-baseline.sh https://ci.linaro.org/job/tcwg_bmk_ci_gnu-bisect-tcwg_bmk_tx1-gnu-release-a… --fail curl -o artifacts/manifests/build-parameters.sh https://ci.linaro.org/job/tcwg_bmk_ci_gnu-bisect-tcwg_bmk_tx1-gnu-release-a… --fail curl -o artifacts/test.sh https://ci.linaro.org/job/tcwg_bmk_ci_gnu-bisect-tcwg_bmk_tx1-gnu-release-a… --fail chmod +x artifacts/test.sh # Reproduce the baseline build (build all pre-requisites) ./jenkins-scripts/tcwg_bmk-build.sh @@ artifacts/manifests/build-baseline.sh cd gcc # Reproduce first_bad build git checkout --detach a4dfaad2e5594d871fe00a1116005e28f95d644e ../artifacts/test.sh # Reproduce last_good build git checkout --detach c1b582720a39c3cb944aaff0298f721cdd034e3f ../artifacts/test.sh cd .. </cut> History of pending regressions and results: https://git.linaro.org/toolchain/ci/base-artifacts.git/log/?h=linaro-local/… Artifacts: https://ci.linaro.org/job/tcwg_bmk_ci_gnu-bisect-tcwg_bmk_tx1-gnu-release-a… Build log: https://ci.linaro.org/job/tcwg_bmk_ci_gnu-bisect-tcwg_bmk_tx1-gnu-release-a… Full commit (up to 1000 lines): <cut> commit a4dfaad2e5594d871fe00a1116005e28f95d644e Author: Richard Sandiford <richard.sandiford(a)arm.com> Date: Mon Sep 30 16:20:44 2019 +0000 Remove global call sets: gcse.c This is another case in which we can conservatively treat partial kills as full kills. Again this is in principle a bug fix for TARGET_HARD_REGNO_CALL_PART_CLOBBERED targets, but in practice it probably doesn't make a difference. 2019-09-30 Richard Sandiford <richard.sandiford(a)arm.com> gcc/ * gcse.c: Include function-abi.h. (compute_hash_table_work): Use insn_callee_abi to get the ABI of the call insn target. Invalidate partially call-clobbered registers as well as fully call-clobbered ones. From-SVN: r276323 --- gcc/ChangeLog | 7 +++++++ gcc/gcse.c | 10 ++++++++-- 2 files changed, 15 insertions(+), 2 deletions(-) diff --git a/gcc/ChangeLog b/gcc/ChangeLog index 9d8b083d539..1b1c31cf009 100644 --- a/gcc/ChangeLog +++ b/gcc/ChangeLog @@ -1,3 +1,10 @@ +2019-09-30 Richard Sandiford <richard.sandiford(a)arm.com> + + * gcse.c: Include function-abi.h. + (compute_hash_table_work): Use insn_callee_abi to get the ABI of + the call insn target. Invalidate partially call-clobbered + registers as well as fully call-clobbered ones. + 2019-09-30 Richard Sandiford <richard.sandiford(a)arm.com> * function.c (aggregate_value_p): Work out which ABI the diff --git a/gcc/gcse.c b/gcc/gcse.c index 9bde8619b7b..aeb59c645e1 100644 --- a/gcc/gcse.c +++ b/gcc/gcse.c @@ -160,6 +160,7 @@ along with GCC; see the file COPYING3. If not see #include "dbgcnt.h" #include "gcse.h" #include "gcse-common.h" +#include "function-abi.h" /* We support GCSE via Partial Redundancy Elimination. PRE optimizations are a superset of those done by classic GCSE. @@ -1528,8 +1529,13 @@ compute_hash_table_work (struct gcse_hash_table_d *table) if (CALL_P (insn)) { hard_reg_set_iterator hrsi; - EXECUTE_IF_SET_IN_HARD_REG_SET (regs_invalidated_by_call, - 0, regno, hrsi) + + /* We don't track modes of hard registers, so we need + to be conservative and assume that partial kills + are full kills. */ + HARD_REG_SET callee_clobbers + = insn_callee_abi (insn).full_and_partial_reg_clobbers (); + EXECUTE_IF_SET_IN_HARD_REG_SET (callee_clobbers, 0, regno, hrsi) record_last_reg_set_info (insn, regno); if (! RTL_CONST_OR_PURE_CALL_P (insn) </cut>

3 years, 12 months

[CI-NOTIFY]: TCWG Bisect tcwg_cross/gnu-master-aarch64-build_cross - Build # 35 - Successful!

by ci_notify＠linaro.org

Successfully identified regression in *glibc* in CI configuration tcwg_cross/gnu-master-aarch64-build_cross. So far, this commit has regressed CI configurations: - tcwg_cross/gnu-master-aarch64-build_cross Culprit: <cut> commit 6ec6c77867af4ddfec7323e0ac6ede89effca852 Author: liuhongt <hongtao.liu(a)intel.com> Date: Wed Jul 7 10:07:59 2021 +0800 soft-fp: Add __extendhfsf2/__extendhfdf2, __truncsfhf2/__truncdfhf2, __eqhf2/__nehf2 1. Add __extendhfdf2/__extendhfsf2 to return an IEEE half converted to IEEE double/single. 2. Add __truncdfhf2/__extendsfhf2 to truncate IEEE double/single into IEEE half. 3. Add __eqhf2/__nehf2 to return 0 if a == b and a,b are not NAN, otherwise return 1. These are needed by x86 _Float16: https://software.intel.com/content/www/us/en/develop/download/intel-avx512-… support in GCC. </cut> Results regressed to (for first_bad == 6ec6c77867af4ddfec7323e0ac6ede89effca852) # reset_artifacts: -10 # true: 0 # build_abe binutils: 1 # build_abe stage1: 2 # build_abe linux: 3 # First few build errors in logs: # 00:00:14 make[2]: *** [/home/tcwg-buildslave/workspace/tcwg_gnu_0/abe/builds/x86_64-pc-linux-gnu/aarch64-linux-gnu/glibc-glibc.git~master/sysd-rules:483: /home/tcwg-buildslave/workspace/tcwg_gnu_0/abe/builds/x86_64-pc-linux-gnu/aarch64-linux-gnu/glibc-glibc.git~master/csu/start.o] Error 1 # 00:00:14 make[2]: *** [/home/tcwg-buildslave/workspace/tcwg_gnu_0/abe/builds/x86_64-pc-linux-gnu/aarch64-linux-gnu/glibc-glibc.git~master/sysd-rules:499: /home/tcwg-buildslave/workspace/tcwg_gnu_0/abe/builds/x86_64-pc-linux-gnu/aarch64-linux-gnu/glibc-glibc.git~master/csu/start.os] Error 1 # 00:00:14 make[2]: *** [/home/tcwg-buildslave/workspace/tcwg_gnu_0/abe/builds/x86_64-pc-linux-gnu/aarch64-linux-gnu/glibc-glibc.git~master/sysd-rules:483: /home/tcwg-buildslave/workspace/tcwg_gnu_0/abe/builds/x86_64-pc-linux-gnu/aarch64-linux-gnu/glibc-glibc.git~master/csu/crtn.o] Error 1 # 00:00:14 make[2]: *** [/home/tcwg-buildslave/workspace/tcwg_gnu_0/abe/builds/x86_64-pc-linux-gnu/aarch64-linux-gnu/glibc-glibc.git~master/sysd-rules:483: /home/tcwg-buildslave/workspace/tcwg_gnu_0/abe/builds/x86_64-pc-linux-gnu/aarch64-linux-gnu/glibc-glibc.git~master/csu/crti.o] Error 1 # 00:00:14 make[2]: *** [../o-iterator.mk:9: /home/tcwg-buildslave/workspace/tcwg_gnu_0/abe/builds/x86_64-pc-linux-gnu/aarch64-linux-gnu/glibc-glibc.git~master/csu/check_fds.o] Error 1 # 00:00:14 make[2]: *** [../o-iterator.mk:9: /home/tcwg-buildslave/workspace/tcwg_gnu_0/abe/builds/x86_64-pc-linux-gnu/aarch64-linux-gnu/glibc-glibc.git~master/csu/check_fds.os] Error 1 # 00:00:14 ../sysdeps/aarch64/nptl/tls.h:91:19: error: ‘__builtin_thread_pointer’ is not supported on this target # 00:00:14 make[2]: *** [/home/tcwg-buildslave/workspace/tcwg_gnu_0/abe/builds/x86_64-pc-linux-gnu/aarch64-linux-gnu/glibc-glibc.git~master/sysd-rules:485: /home/tcwg-buildslave/workspace/tcwg_gnu_0/abe/builds/x86_64-pc-linux-gnu/aarch64-linux-gnu/glibc-glibc.git~master/csu/libc-tls.o] Error 1 # 00:00:14 ../sysdeps/unix/sysv/linux/aarch64/sysdep.h:190:17: error: invalid register name for ‘_x0’ # 00:00:14 ../sysdeps/unix/sysv/linux/aarch64/sysdep.h:174:22: error: invalid register name for ‘_x8’ from (for last_good == b46cfcef3f7dab8e90729c6616ac1420f2642245) # reset_artifacts: -10 # true: 0 # build_abe binutils: 1 # build_abe stage1: 2 # build_abe linux: 3 # build_abe glibc: 4 # build_abe stage2: 5 # build_abe qemu: 6 Artifacts of last_good build: https://ci.linaro.org/job/tcwg_cross-bisect-gnu-master-aarch64-build_cross/… Artifacts of first_bad build: https://ci.linaro.org/job/tcwg_cross-bisect-gnu-master-aarch64-build_cross/… Build top page/logs: https://ci.linaro.org/job/tcwg_cross-bisect-gnu-master-aarch64-build_cross/… Configuration details: Reproduce builds: <cut> mkdir investigate-glibc-6ec6c77867af4ddfec7323e0ac6ede89effca852 cd investigate-glibc-6ec6c77867af4ddfec7323e0ac6ede89effca852 git clone https://git.linaro.org/toolchain/jenkins-scripts mkdir -p artifacts/manifests curl -o artifacts/manifests/build-baseline.sh https://ci.linaro.org/job/tcwg_cross-bisect-gnu-master-aarch64-build_cross/… --fail curl -o artifacts/manifests/build-parameters.sh https://ci.linaro.org/job/tcwg_cross-bisect-gnu-master-aarch64-build_cross/… --fail curl -o artifacts/test.sh https://ci.linaro.org/job/tcwg_cross-bisect-gnu-master-aarch64-build_cross/… --fail chmod +x artifacts/test.sh # Reproduce the baseline build (build all pre-requisites) ./jenkins-scripts/tcwg_gnu-build.sh @@ artifacts/manifests/build-baseline.sh cd glibc # Reproduce first_bad build git checkout --detach 6ec6c77867af4ddfec7323e0ac6ede89effca852 ../artifacts/test.sh # Reproduce last_good build git checkout --detach b46cfcef3f7dab8e90729c6616ac1420f2642245 ../artifacts/test.sh cd .. </cut> History of pending regressions and results: https://git.linaro.org/toolchain/ci/base-artifacts.git/log/?h=linaro-local/… Artifacts: https://ci.linaro.org/job/tcwg_cross-bisect-gnu-master-aarch64-build_cross/… Build log: https://ci.linaro.org/job/tcwg_cross-bisect-gnu-master-aarch64-build_cross/… Full commit (up to 1000 lines): <cut> commit 6ec6c77867af4ddfec7323e0ac6ede89effca852 Author: liuhongt <hongtao.liu(a)intel.com> Date: Wed Jul 7 10:07:59 2021 +0800 soft-fp: Add __extendhfsf2/__extendhfdf2, __truncsfhf2/__truncdfhf2, __eqhf2/__nehf2 1. Add __extendhfdf2/__extendhfsf2 to return an IEEE half converted to IEEE double/single. 2. Add __truncdfhf2/__extendsfhf2 to truncate IEEE double/single into IEEE half. 3. Add __eqhf2/__nehf2 to return 0 if a == b and a,b are not NAN, otherwise return 1. These are needed by x86 _Float16: https://software.intel.com/content/www/us/en/develop/download/intel-avx512-… support in GCC. --- soft-fp/eqhf2.c | 49 +++++++++++++++++++++++++++++++++++++++++++++++ soft-fp/extendhfdf2.c | 53 +++++++++++++++++++++++++++++++++++++++++++++++++++ soft-fp/extendhfsf2.c | 49 +++++++++++++++++++++++++++++++++++++++++++++++ soft-fp/half.h | 2 ++ soft-fp/truncdfhf2.c | 52 ++++++++++++++++++++++++++++++++++++++++++++++++++ soft-fp/truncsfhf2.c | 48 ++++++++++++++++++++++++++++++++++++++++++++++ 6 files changed, 253 insertions(+) diff --git a/soft-fp/eqhf2.c b/soft-fp/eqhf2.c new file mode 100644 index 0000000000..6d6634e5c5 --- /dev/null +++ b/soft-fp/eqhf2.c @@ -0,0 +1,49 @@ +/* Software floating-point emulation. + Return 0 iff a == b, 1 otherwise + Copyright (C) 2021 Free Software Foundation, Inc. + This file is part of the GNU C Library. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + In addition to the permissions in the GNU Lesser General Public + License, the Free Software Foundation gives you unlimited + permission to link the compiled version of this file into + combinations with other programs, and to distribute those + combinations without any restriction coming from the use of this + file. (The Lesser General Public License restrictions do apply in + other respects; for example, they cover modification of the file, + and distribution when not linked into a combine executable.) + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, see + <http://www.gnu.org/licenses/>. */ + +#include "soft-fp.h" +#include "half.h" + +CMPtype +__eqhf2 (HFtype a, HFtype b) +{ + FP_DECL_EX; + FP_DECL_H (A); + FP_DECL_H (B); + CMPtype r; + + FP_INIT_EXCEPTIONS; + FP_UNPACK_RAW_H (A, a); + FP_UNPACK_RAW_H (B, b); + FP_CMP_EQ_H (r, A, B, 1); + FP_HANDLE_EXCEPTIONS; + + return r; +} + +strong_alias (__eqhf2, __nehf2); diff --git a/soft-fp/extendhfdf2.c b/soft-fp/extendhfdf2.c new file mode 100644 index 0000000000..337ba791d4 --- /dev/null +++ b/soft-fp/extendhfdf2.c @@ -0,0 +1,53 @@ +/* Software floating-point emulation. + Return an IEEE half converted to IEEE double + Copyright (C) 2021 Free Software Foundation, Inc. + This file is part of the GNU C Library. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + In addition to the permissions in the GNU Lesser General Public + License, the Free Software Foundation gives you unlimited + permission to link the compiled version of this file into + combinations with other programs, and to distribute those + combinations without any restriction coming from the use of this + file. (The Lesser General Public License restrictions do apply in + other respects; for example, they cover modification of the file, + and distribution when not linked into a combine executable.) + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, see + <http://www.gnu.org/licenses/>. */ + +#define FP_NO_EXACT_UNDERFLOW +#include "soft-fp.h" +#include "half.h" +#include "double.h" + +DFtype +__extendhfdf2 (HFtype a) +{ + FP_DECL_EX; + FP_DECL_H (A); + FP_DECL_D (R); + DFtype r; + + FP_INIT_EXCEPTIONS; + FP_UNPACK_RAW_H (A, a); +#if _FP_W_TYPE_SIZE < _FP_FRACBITS_D + FP_EXTEND (D, H, 2, 1, R, A); +#else + FP_EXTEND (D, H, 1, 1, R, A); +#endif + FP_PACK_RAW_D (r, R); + FP_HANDLE_EXCEPTIONS; + + return r; +} diff --git a/soft-fp/extendhfsf2.c b/soft-fp/extendhfsf2.c new file mode 100644 index 0000000000..a02f46d9a9 --- /dev/null +++ b/soft-fp/extendhfsf2.c @@ -0,0 +1,49 @@ +/* Software floating-point emulation. + Return an IEEE half converted to IEEE single + Copyright (C) 2021 Free Software Foundation, Inc. + This file is part of the GNU C Library. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + In addition to the permissions in the GNU Lesser General Public + License, the Free Software Foundation gives you unlimited + permission to link the compiled version of this file into + combinations with other programs, and to distribute those + combinations without any restriction coming from the use of this + file. (The Lesser General Public License restrictions do apply in + other respects; for example, they cover modification of the file, + and distribution when not linked into a combine executable.) + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, see + <http://www.gnu.org/licenses/>. */ + +#define FP_NO_EXACT_UNDERFLOW +#include "soft-fp.h" +#include "half.h" +#include "single.h" + +SFtype +__extendhfsf2 (HFtype a) +{ + FP_DECL_EX; + FP_DECL_H (A); + FP_DECL_S (R); + SFtype r; + + FP_INIT_EXCEPTIONS; + FP_UNPACK_RAW_H (A, a); + FP_EXTEND (S, H, 1, 1, R, A); + FP_PACK_RAW_S (r, R); + FP_HANDLE_EXCEPTIONS; + + return r; +} diff --git a/soft-fp/half.h b/soft-fp/half.h index ca2c1fad03..70af2712fc 100644 --- a/soft-fp/half.h +++ b/soft-fp/half.h @@ -167,4 +167,6 @@ union _FP_UNION_H #define _FP_FRAC_HIGH_RAW_H(X) _FP_FRAC_HIGH_1 (X) #define _FP_FRAC_HIGH_DW_H(X) _FP_FRAC_HIGH_1 (X) +#define FP_CMP_EQ_H(r, X, Y, ex) _FP_CMP_EQ (H, 1, (r), X, Y, (ex)) + #endif /* !SOFT_FP_HALF_H */ diff --git a/soft-fp/truncdfhf2.c b/soft-fp/truncdfhf2.c new file mode 100644 index 0000000000..8bcb278769 --- /dev/null +++ b/soft-fp/truncdfhf2.c @@ -0,0 +1,52 @@ +/* Software floating-point emulation. + Truncate IEEE double into IEEE half. + Copyright (C) 2021 Free Software Foundation, Inc. + This file is part of the GNU C Library. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + In addition to the permissions in the GNU Lesser General Public + License, the Free Software Foundation gives you unlimited + permission to link the compiled version of this file into + combinations with other programs, and to distribute those + combinations without any restriction coming from the use of this + file. (The Lesser General Public License restrictions do apply in + other respects; for example, they cover modification of the file, + and distribution when not linked into a combine executable.) + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, see + <http://www.gnu.org/licenses/>. */ + +#include "soft-fp.h" +#include "half.h" +#include "double.h" + +HFtype +__truncdfhf2 (DFtype a) +{ + FP_DECL_EX; + FP_DECL_D (A); + FP_DECL_H (R); + HFtype r; + + FP_INIT_ROUNDMODE; + FP_UNPACK_SEMIRAW_D (A, a); +#if _FP_W_TYPE_SIZE < _FP_FRACBITS_D + FP_TRUNC (H, D, 1, 2, R, A); +#else + FP_TRUNC (H, D, 1, 1, R, A); +#endif + FP_PACK_SEMIRAW_H (r, R); + FP_HANDLE_EXCEPTIONS; + + return r; +} diff --git a/soft-fp/truncsfhf2.c b/soft-fp/truncsfhf2.c new file mode 100644 index 0000000000..25bee29f7f --- /dev/null +++ b/soft-fp/truncsfhf2.c @@ -0,0 +1,48 @@ +/* Software floating-point emulation. + Truncate IEEE single into IEEE half. + Copyright (C) 2021 Free Software Foundation, Inc. + This file is part of the GNU C Library. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + In addition to the permissions in the GNU Lesser General Public + License, the Free Software Foundation gives you unlimited + permission to link the compiled version of this file into + combinations with other programs, and to distribute those + combinations without any restriction coming from the use of this + file. (The Lesser General Public License restrictions do apply in + other respects; for example, they cover modification of the file, + and distribution when not linked into a combine executable.) + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, see + <http://www.gnu.org/licenses/>. */ + +#include "soft-fp.h" +#include "half.h" +#include "single.h" + +HFtype +__truncsfhf2 (SFtype a) +{ + FP_DECL_EX; + FP_DECL_S (A); + FP_DECL_H (R); + HFtype r; + + FP_INIT_ROUNDMODE; + FP_UNPACK_SEMIRAW_S (A, a); + FP_TRUNC (H, S, 1, 1, R, A); + FP_PACK_SEMIRAW_H (r, R); + FP_HANDLE_EXCEPTIONS; + + return r; +} </cut>

3 years, 12 months

[CI-NOTIFY]: TCWG Bisect tcwg_cross/gnu-master-aarch64-build_cross - Build # 21 - Successful!

by ci_notify＠linaro.org

3 years, 12 months

[CI-NOTIFY]: TCWG Bisect tcwg_cross/gnu-master-aarch64-build_cross - Build # 38 - Successful!

by ci_notify＠linaro.org

3 years, 12 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

linaro-toolchain