There are 8 phys at each Pcie Controller, so it should be set for 8 times loop.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Heyi Guo heyi.guo@linaro.org --- Chips/Hisilicon/Hi1610/Drivers/PcieInit1610/PcieInitLib.c | 8 +++++--- Chips/Hisilicon/Hi1610/Drivers/PcieInit1610/PcieInitLib.h | 2 ++ 2 files changed, 7 insertions(+), 3 deletions(-)
diff --git a/Chips/Hisilicon/Hi1610/Drivers/PcieInit1610/PcieInitLib.c b/Chips/Hisilicon/Hi1610/Drivers/PcieInit1610/PcieInitLib.c index 88810ce..4519cd0 100644 --- a/Chips/Hisilicon/Hi1610/Drivers/PcieInit1610/PcieInitLib.c +++ b/Chips/Hisilicon/Hi1610/Drivers/PcieInit1610/PcieInitLib.c @@ -466,9 +466,11 @@ VOID PciePcsInit(UINT32 soctype, UINT32 HostBridgeNum, UINT32 Port) UINT32 Value = 0; if (0x1610 == soctype) { - RegRead(PCIE_PHY_BASE_1610[HostBridgeNum][Port] + 0x204 + i*0x4, Value); - Value |= (1 << 20); - RegWrite(PCIE_PHY_BASE_1610[HostBridgeNum][Port] + 0x204 + i*0x4, Value); + for (i = 0; i < PcieMaxLanNum; i++) { + RegRead(PCIE_PHY_BASE_1610[HostBridgeNum][Port] + PCS_SDS_CFG_REG + i * SDS_CFG_STRIDE, Value); + Value |= (1 << 20); //bit 20: rxvalid enable + RegWrite(PCIE_PHY_BASE_1610[HostBridgeNum][Port] + PCS_SDS_CFG_REG + i * SDS_CFG_STRIDE, Value); + } PcieRxValidCtrl(soctype, HostBridgeNum, Port, 0); RegWrite(PCIE_PHY_BASE_1610[HostBridgeNum][Port] + 0x264, 0x3D090); } diff --git a/Chips/Hisilicon/Hi1610/Drivers/PcieInit1610/PcieInitLib.h b/Chips/Hisilicon/Hi1610/Drivers/PcieInit1610/PcieInitLib.h index 1e8db97..9671c57 100644 --- a/Chips/Hisilicon/Hi1610/Drivers/PcieInit1610/PcieInitLib.h +++ b/Chips/Hisilicon/Hi1610/Drivers/PcieInit1610/PcieInitLib.h @@ -68,6 +68,8 @@ #define PCIE_BAR_TYPE_64 (2) #define PCIE_BAR_PREFETCH_MODE (1)
+#define PCS_SDS_CFG_REG 0x204 +#define SDS_CFG_STRIDE 0x4 #define RegWrite(addr,data) MmioWrite32((addr), (data)) #define RegRead(addr,data) ((data) = MmioRead32 (addr))