November 2018 - Linux-kselftest-mirror

[PATCH AUTOSEL 4.19 35/68] tc-testing: tdc.py: ignore errors when decoding stdout/stderr

by Sasha Levin

From: Lucas Bates <lucasb(a)mojatatu.com> [ Upstream commit 5aaf6428526bcad98d6f51f2f679c919bb75d7e9 ] Prevent exceptions from being raised while decoding output from an executed command. There is no impact on tdc's execution and the verify command phase would fail the pattern match. Signed-off-by: Lucas Bates <lucasb(a)mojatatu.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/tc-testing/tdc.py | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/tc-testing/tdc.py b/tools/testing/selftests/tc-testing/tdc.py index 87a04a8a5945..9b3f414ff1e9 100755 --- a/tools/testing/selftests/tc-testing/tdc.py +++ b/tools/testing/selftests/tc-testing/tdc.py @@ -134,9 +134,9 @@ def exec_cmd(args, pm, stage, command): (rawout, serr) = proc.communicate() if proc.returncode != 0 and len(serr) > 0: - foutput = serr.decode("utf-8") + foutput = serr.decode("utf-8", errors="ignore") else: - foutput = rawout.decode("utf-8") + foutput = rawout.decode("utf-8", errors="ignore") proc.stdout.close() proc.stderr.close() -- 2.17.1

6 years, 1 month

1
0
0 0

[PATCH] selftests/bpf: add config fragment CONFIG_FTRACE_SYSCALLS

by Naresh Kamboju

CONFIG_FTRACE_SYSCALLS=y is required for get_cgroup_id_user test case this test reads a file from debug trace path /sys/kernel/debug/tracing/events/syscalls/sys_enter_nanosleep/id Signed-off-by: Naresh Kamboju <naresh.kamboju(a)linaro.org> --- tools/testing/selftests/bpf/config | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/testing/selftests/bpf/config b/tools/testing/selftests/bpf/config index 7f90d3645af8..37f947ec44ed 100644 --- a/tools/testing/selftests/bpf/config +++ b/tools/testing/selftests/bpf/config @@ -22,3 +22,4 @@ CONFIG_NET_CLS_FLOWER=m CONFIG_LWTUNNEL=y CONFIG_BPF_STREAM_PARSER=y CONFIG_XDP_SOCKETS=y +CONFIG_FTRACE_SYSCALLS=y -- 2.17.1

6 years, 1 month

3
2
0 0

[PATCH] kvm: selftests: fix spelling mistake "begining" -> "beginning"

by Colin King

From: Colin Ian King <colin.king(a)canonical.com> The text in a TEST_ASSERT message contains a spelling mistake, fix it. Signed-off-by: Colin Ian King <colin.king(a)canonical.com> --- tools/testing/selftests/kvm/lib/elf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/kvm/lib/elf.c b/tools/testing/selftests/kvm/lib/elf.c index 5eb857584aa3..53c48f7587d3 100644 --- a/tools/testing/selftests/kvm/lib/elf.c +++ b/tools/testing/selftests/kvm/lib/elf.c @@ -141,7 +141,7 @@ void kvm_vm_elf_load(struct kvm_vm *vm, const char *filename, offset = hdr.e_phoff + (n1 * hdr.e_phentsize); offset_rv = lseek(fd, offset, SEEK_SET); TEST_ASSERT(offset_rv == offset, - "Failed to seek to begining of program header %u,\n" + "Failed to seek to beginning of program header %u,\n" " filename: %s\n" " rv: %jd errno: %i", n1, filename, (intmax_t) offset_rv, errno); -- 2.19.1

6 years, 1 month

2
1
0 0

[PATCH -next 1/2] mm/memfd: make F_SEAL_FUTURE_WRITE seal more robust

by Joel Fernandes (Google)

A better way to do F_SEAL_FUTURE_WRITE seal was discussed [1] last week where we don't need to modify core VFS structures to get the same behavior of the seal. This solves several side-effects pointed out by Andy [2]. [1] https://lore.kernel.org/lkml/20181111173650.GA256781@google.com/ [2] https://lore.kernel.org/lkml/69CE06CC-E47C-4992-848A-66EB23EE6C74@amacapita… Suggested-by: Andy Lutomirski <luto(a)kernel.org> Fixes: 5e653c2923fd ("mm: Add an F_SEAL_FUTURE_WRITE seal to memfd") Signed-off-by: Joel Fernandes (Google) <joel(a)joelfernandes.org> --- fs/hugetlbfs/inode.c | 2 +- mm/memfd.c | 19 ------------------- mm/shmem.c | 24 +++++++++++++++++++++--- 3 files changed, 22 insertions(+), 23 deletions(-) diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c index 762028994f47..5b54bf893a67 100644 --- a/fs/hugetlbfs/inode.c +++ b/fs/hugetlbfs/inode.c @@ -558,7 +558,7 @@ static long hugetlbfs_punch_hole(struct inode *inode, loff_t offset, loff_t len) inode_lock(inode); /* protected by i_mutex */ - if (info->seals & F_SEAL_WRITE) { + if (info->seals & (F_SEAL_WRITE | F_SEAL_FUTURE_WRITE)) { inode_unlock(inode); return -EPERM; } diff --git a/mm/memfd.c b/mm/memfd.c index 63fff5e77114..650e65a46b9c 100644 --- a/mm/memfd.c +++ b/mm/memfd.c @@ -201,25 +201,6 @@ static int memfd_add_seals(struct file *file, unsigned int seals) } } - if ((seals & F_SEAL_FUTURE_WRITE) && - !(*file_seals & F_SEAL_FUTURE_WRITE)) { - /* - * The FUTURE_WRITE seal also prevents growing and shrinking - * so we need them to be already set, or requested now. - */ - int test_seals = (seals | *file_seals) & - (F_SEAL_GROW | F_SEAL_SHRINK); - - if (test_seals != (F_SEAL_GROW | F_SEAL_SHRINK)) { - error = -EINVAL; - goto unlock; - } - - spin_lock(&file->f_lock); - file->f_mode &= ~(FMODE_WRITE | FMODE_PWRITE); - spin_unlock(&file->f_lock); - } - *file_seals |= seals; error = 0; diff --git a/mm/shmem.c b/mm/shmem.c index 32eb29bd72c6..cee9878c87f1 100644 --- a/mm/shmem.c +++ b/mm/shmem.c @@ -2121,6 +2121,23 @@ int shmem_lock(struct file *file, int lock, struct user_struct *user) static int shmem_mmap(struct file *file, struct vm_area_struct *vma) { + struct shmem_inode_info *info = SHMEM_I(file_inode(file)); + + /* + * New PROT_READ and MAP_SHARED mmaps are not allowed when "future + * write" seal active. + */ + if ((vma->vm_flags & VM_SHARED) && (vma->vm_flags & VM_WRITE) && + (info->seals & F_SEAL_FUTURE_WRITE)) + return -EPERM; + + /* + * Since the F_SEAL_FUTURE_WRITE seals allow for a MAP_SHARED read-only + * mapping, take care to not allow mprotect to revert protections. + */ + if (info->seals & F_SEAL_FUTURE_WRITE) + vma->vm_flags &= ~(VM_MAYWRITE); + file_accessed(file); vma->vm_ops = &shmem_vm_ops; if (IS_ENABLED(CONFIG_TRANSPARENT_HUGE_PAGECACHE) && @@ -2346,8 +2363,9 @@ shmem_write_begin(struct file *file, struct address_space *mapping, pgoff_t index = pos >> PAGE_SHIFT; /* i_mutex is held by caller */ - if (unlikely(info->seals & (F_SEAL_WRITE | F_SEAL_GROW))) { - if (info->seals & F_SEAL_WRITE) + if (unlikely(info->seals & (F_SEAL_GROW | + F_SEAL_WRITE | F_SEAL_FUTURE_WRITE))) { + if (info->seals & (F_SEAL_WRITE | F_SEAL_FUTURE_WRITE)) return -EPERM; if ((info->seals & F_SEAL_GROW) && pos + len > inode->i_size) return -EPERM; @@ -2610,7 +2628,7 @@ static long shmem_fallocate(struct file *file, int mode, loff_t offset, DECLARE_WAIT_QUEUE_HEAD_ONSTACK(shmem_falloc_waitq); /* protected by i_mutex */ - if (info->seals & F_SEAL_WRITE) { + if (info->seals & (F_SEAL_WRITE | F_SEAL_FUTURE_WRITE)) { error = -EPERM; goto out; } -- 2.19.1.1215.g8438c0b245-goog

6 years, 1 month

7
15
0 0

[PATCH][next] tools/bpf: fix spelling mistake "memeory" -> "memory"

by Colin King

From: Colin Ian King <colin.king(a)canonical.com> The CHECK message contains a spelling mistake, fix it. Signed-off-by: Colin Ian King <colin.king(a)canonical.com> --- tools/testing/selftests/bpf/test_btf.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/bpf/test_btf.c b/tools/testing/selftests/bpf/test_btf.c index 7b1b160d6e67..bcbda7037840 100644 --- a/tools/testing/selftests/bpf/test_btf.c +++ b/tools/testing/selftests/bpf/test_btf.c @@ -2573,7 +2573,7 @@ static int do_test_file(unsigned int test_num) } func_info = malloc(info.func_info_cnt * rec_size); - if (CHECK(!func_info, "out of memeory")) { + if (CHECK(!func_info, "out of memory")) { err = -1; goto done; } @@ -3299,7 +3299,7 @@ static int do_test_func_type(int test_num) } func_info = malloc(info.func_info_cnt * rec_size); - if (CHECK(!func_info, "out of memeory")) { + if (CHECK(!func_info, "out of memory")) { err = -1; goto done; } -- 2.19.1

6 years, 1 month

2
1
0 0

selftests/bpf :get_cgroup_id_user: File not found: /sys/kernel/debug/tracing/events/syscalls/sys_enter_nanosleep/id

by Naresh Kamboju

Kselftest bpf get_cgroup_id_user is failed on all devices. selftests: bpf: get_cgroup_id_user main:PASS:setup_cgroup_environment main:PASS:create_and_get_cgroup main:PASS:join_cgroup main:PASS:bpf_prog_load main:PASS:bpf_find_map main:PASS:bpf_find_map main:FAIL:open err -1 errno 2 not ok 1..15 selftests: bpf: get_cgroup_id_user [FAIL] The strace output shows, This expected file not found, "/sys/kernel/debug/tracing/events/syscalls/sys_enter_nanosleep/id" bpf(BPF_MAP_UPDATE_ELEM, {map_fd=5, key=0x7fff0c68c138, value=0x7fff0c68c13c, flags=BPF_ANY}, 72) = 0 open(\"/sys/kernel/debug/tracing/events/syscalls/sys_enter_nanosleep/id\", O_RDONLY) = -1 ENOENT (No such file or directory) write(1, \"main:FAIL:open err -1 errno 2\n\", 30main:FAIL:open err -1 errno 2 Am I missing any pre-requirement ? Best regards Naresh Kamboju

6 years, 1 month

3
2
0 0

[PATCH v2] sysctl: kselftests: fix test_modprobe issue

by Lei Yang

when CONFIG_TEST_SYSCTL=y, there is no "/sys/module/test_sysctl/" when CONFIG_TEST_SYSCTL=m, checking /sys/module/test_sysctl/ is before kernel module loading you'll get below error message root@intel-x86-64:/tmp/sysctl# ./sysctl.sh Checking production write strict setting ... ok ./sysctl.sh: /sys/module/test_sysctl/ not present You must have the following enabled in your kernel: This patch will fix this issue. when CONFIG_TEST_SYSCTL=y, it has no chance to check "/sys/module/test_sysctl/" when CONFIG_TEST_SYSCTL=m, it will load kernel module first before checking sys interface. Signed-off-by: Lei Yang <Lei.Yang(a)windriver.com> --- tools/testing/selftests/sysctl/sysctl.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/sysctl/sysctl.sh b/tools/testing/selftests/sysctl/sysctl.sh index 584eb8e..08dc995 100755 --- a/tools/testing/selftests/sysctl/sysctl.sh +++ b/tools/testing/selftests/sysctl/sysctl.sh @@ -120,6 +120,7 @@ test_reqs() function load_req_mod() { + trap "test_modprobe" EXIT if [ ! -d $DIR ]; then if ! modprobe -q -n $TEST_DRIVER; then echo "$0: module $TEST_DRIVER not found [SKIP]" @@ -770,7 +771,6 @@ function parse_args() test_reqs allow_user_defaults check_production_sysctl_writes_strict -test_modprobe load_req_mod trap "test_finish" EXIT -- 1.9.1

6 years, 1 month

3
2
0 0

selftests/bpf: libbpf: object file doesn't contain bpf program

by Naresh Kamboju

The listed bpf test case failed due to, libbpf: object file doesn't contain bpf program We are cross compiling, installing selftests on device under test and running tests by using run_kselftest.sh script file. selftests: bpf: test_maps libbpf: object file doesn't contain bpf program Failed to load SK_SKB parse prog not ok 1..3 selftests: bpf: test_maps [FAIL] selftests: bpf: test_progs libbpf: object file doesn't contain bpf program libbpf: object file doesn't contain bpf program libbpf: object file doesn't contain bpf program libbpf: object file doesn't contain bpf program libbpf: ./test_tcp_estats.o doesn't provide kernel version libbpf: object file doesn't contain bpf program selftests: bpf: test_tcpbpf_user libbpf: object file doesn't contain bpf program FAILED: load_bpf_file failed for: test_tcpbpf_kern.o not ok 1..10 selftests: bpf: test_tcpbpf_user [FAIL] selftests: bpf: test_tcpnotify_user libbpf: object file doesn't contain bpf program FAILED: load_bpf_file failed for: test_tcpnotify_kern.o not ok 1..21 selftests: bpf: test_tcpnotify_user [FAIL] selftests: bpf: test_flow_dissector.sh bpffs not mounted. Mounting... libbpf: object file doesn't contain bpf program ./flow_dissector_load: bpf_prog_load bpf_flow.o selftests: test_flow_dissector [FAILED] Do you see problem when running on target devices ? Best regards Naresh Kamboju

6 years, 1 month

1
0
0 0

[PATCH -manpage 1/2] fcntl.2: Update manpage with new memfd F_SEAL_FUTURE_WRITE seal

by Joel Fernandes (Google)

More details of the seal can be found in the LKML patch: https://lore.kernel.org/lkml/20181120052137.74317-1-joel@joelfernandes.org/… Signed-off-by: Joel Fernandes (Google) <joel(a)joelfernandes.org> --- man2/fcntl.2 | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/man2/fcntl.2 b/man2/fcntl.2 index 03533d65b49d..54772f94964c 100644 --- a/man2/fcntl.2 +++ b/man2/fcntl.2 @@ -1525,6 +1525,21 @@ Furthermore, if there are any asynchronous I/O operations .RB ( io_submit (2)) pending on the file, all outstanding writes will be discarded. +.TP +.BR F_SEAL_FUTURE_WRITE +If this seal is set, the contents of the file can be modified only from +existing writeable mappings that were created prior to the seal being set. +Any attempt to create a new writeable mapping on the memfd via +.BR mmap (2) +will fail with +.BR EPERM. +Also any attempts to write to the memfd via +.BR write (2) +will fail with +.BR EPERM. +This is useful in situations where existing writable mapped regions need to be +kept intact while preventing any future writes. For example, to share a +read-only memory buffer to other processes that only the sender can write to. .\" .SS File read/write hints Write lifetime hints can be used to inform the kernel about the relative -- 2.19.1.1215.g8438c0b245-goog

6 years, 1 month

1
1
0 0

[PATCH net-next 00/18] selftests: Add tests for VXLAN at an 802.1d bridge

by Ido Schimmel

Petr says: This patchset adds several tests for VXLAN attached to an 802.1d bridge and fixes a related bug. First patch #1 fixes a bug in propagating SKB already-forwarded marks over veth to bridges, where they are irrelevant. This bug causes the vxlan_bridge_1d test suite from this patchset to fail as the packets aren't forwarded by br2. In patches #2 and #3, lib.sh is extended to support network namespaces. The use of namespaces is necessitated by VXLAN, which allows only one VXLAN device with a given VNI per namespace. Thus to host full topology on a single box for selftests, the "remote" endpoints need to be in namespaces. In patches #4-#6, lib.sh is extended in other ways to facilitate the following patches. In patches #7-#15, first the skeleton, and later the generic tests themselves are added. Patch #16 then adds another test that serves as a wrapper around the previous one, and runs it with a non-default port number. Patches #17 and #18 add mlxsw-specific tests. About those, Ido writes: The first test creates various configurations with regards to the VxLAN and bridge devices and makes sure the driver correctly forbids unsupported configuration and permits supported ones. It also verifies that the driver correctly sets the offload indication on FDB entries and the local route used for VxLAN decapsulation. The second test verifies that the driver correctly configures the singly linked list used to flood BUM traffic and that traffic is flooded as expected. Ido Schimmel (2): selftests: mlxsw: Add a test for VxLAN configuration selftests: mlxsw: Add a test for VxLAN flooding Petr Machata (16): net: skb_scrub_packet(): Scrub offload_fwd_mark selftests: forwarding: lib: Support NUM_NETIFS of 0 selftests: forwarding: lib: Add in_ns() selftests: forwarding: ping{6,}_test(): Add description argument selftests: forwarding: ping{6,}_do(): Allow passing ping arguments selftests: forwarding: lib: Add link_stats_rx_errors_get() selftests: forwarding: Add a skeleton of vxlan_bridge_1d selftests: forwarding: vxlan_bridge_1d: Add ping test selftests: forwarding: vxlan_bridge_1d: Add flood test selftests: forwarding: vxlan_bridge_1d: Add unicast test selftests: forwarding: vxlan_bridge_1d: Reconfigure & rerun tests selftests: forwarding: vxlan_bridge_1d: Add a TTL test selftests: forwarding: vxlan_bridge_1d: Add a TOS test selftests: forwarding: vxlan_bridge_1d: Add an ECN encap test selftests: forwarding: vxlan_bridge_1d: Add an ECN decap test selftests: forwarding: vxlan_bridge_1d_port_8472: New test net/core/skbuff.c | 5 + .../selftests/drivers/net/mlxsw/vxlan.sh | 664 +++++++++++++++++ .../drivers/net/mlxsw/vxlan_flooding.sh | 309 ++++++++ tools/testing/selftests/net/forwarding/lib.sh | 42 +- .../net/forwarding/vxlan_bridge_1d.sh | 678 ++++++++++++++++++ .../forwarding/vxlan_bridge_1d_port_8472.sh | 10 + 6 files changed, 1700 insertions(+), 8 deletions(-) create mode 100755 tools/testing/selftests/drivers/net/mlxsw/vxlan.sh create mode 100755 tools/testing/selftests/drivers/net/mlxsw/vxlan_flooding.sh create mode 100755 tools/testing/selftests/net/forwarding/vxlan_bridge_1d.sh create mode 100755 tools/testing/selftests/net/forwarding/vxlan_bridge_1d_port_8472.sh -- 2.19.1

6 years, 1 month

4
24
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror November 2018