Just like commit e2ba732a1681 ("selftests: fib_tests: sleep after
changing carrier"), wait one second to allow linkwatch to propagate the
carrier change to the stack.
There are two sets of carrier tests. The first slept after the carrier
was set to off, and when the second set ran, it was likely that the
linkwatch would be able to run again without much delay, reducing the
likelihood of a race. However, if you run 'fib_tests.sh -t carrier' on a
loop, you will quickly notice the failures.
Sleeping on the second set of tests make the failures go away.
Cc: David Ahern <dsahern(a)gmail.com>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo(a)canonical.com>
---
tools/testing/selftests/net/fib_tests.sh | 1 +
1 file changed, 1 insertion(+)
diff --git a/tools/testing/selftests/net/fib_tests.sh b/tools/testing/selftests/net/fib_tests.sh
index 802b4af18729..1080ff55a788 100755
--- a/tools/testing/selftests/net/fib_tests.sh
+++ b/tools/testing/selftests/net/fib_tests.sh
@@ -388,6 +388,7 @@ fib_carrier_unicast_test()
set -e
$IP link set dev dummy0 carrier off
+ sleep 1
set +e
echo " Carrier down"
--
2.20.1
From: Fathi Boudra <fathi.boudra(a)linaro.org>
[ Upstream commit 7d4e591bc051d3382c45caaa2530969fb42ed23d ]
posix_timers fails to build due to undefined reference errors:
aarch64-linaro-linux-gcc --sysroot=/build/tmp-rpb-glibc/sysroots/hikey
-O2 -pipe -g -feliminate-unused-debug-types -O3 -Wl,-no-as-needed -Wall
-DKTEST -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -lrt -lpthread
posix_timers.c
-o /build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/timers/posix_timers
/tmp/cc1FTZzT.o: In function `check_timer_create':
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/timers/posix_timers.c:157:
undefined reference to `timer_create'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/timers/posix_timers.c:170:
undefined reference to `timer_settime'
collect2: error: ld returned 1 exit status
It's GNU Make and linker specific.
The default Makefile rule looks like:
$(CC) $(CFLAGS) $(LDFLAGS) $@ $^ $(LDLIBS)
When linking is done by gcc itself, no issue, but when it needs to be passed
to proper ld, only LDLIBS follows and then ld cannot know what libs to link
with.
More detail:
https://www.gnu.org/software/make/manual/html_node/Implicit-Variables.html
LDFLAGS
Extra flags to give to compilers when they are supposed to invoke the linker,
‘ld’, such as -L. Libraries (-lfoo) should be added to the LDLIBS variable
instead.
LDLIBS
Library flags or names given to compilers when they are supposed to invoke the
linker, ‘ld’. LOADLIBES is a deprecated (but still supported) alternative to
LDLIBS. Non-library linker flags, such as -L, should go in the LDFLAGS
variable.
https://lkml.org/lkml/2010/2/10/362
tools/perf: libraries must come after objects
Link order matters, use LDLIBS instead of LDFLAGS to properly link against
libpthread.
Signed-off-by: Denys Dmytriyenko <denys(a)ti.com>
Signed-off-by: Fathi Boudra <fathi.boudra(a)linaro.org>
Signed-off-by: Shuah Khan <shuah(a)kernel.org>
Signed-off-by: Sasha Levin <sashal(a)kernel.org>
---
tools/testing/selftests/timers/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/testing/selftests/timers/Makefile b/tools/testing/selftests/timers/Makefile
index 3496680981f20..d937e45532d83 100644
--- a/tools/testing/selftests/timers/Makefile
+++ b/tools/testing/selftests/timers/Makefile
@@ -1,6 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
CFLAGS += -O3 -Wl,-no-as-needed -Wall
-LDFLAGS += -lrt -lpthread -lm
+LDLIBS += -lrt -lpthread -lm
# these are all "safe" tests that don't modify
# system time or require escalated privileges
--
2.19.1
From: Colin Ian King <colin.king(a)canonical.com>
[ Upstream commit 2b531b6137834a55857a337ac17510d6436b6fbb ]
The cpu-hotplug test assumes that we can offline the maximum CPU as
described by /sys/devices/system/cpu/offline. However, in the case
where the number of CPUs exceeds like kernel configuration then
the offline count can be greater than the present count and we end
up trying to test the offlining of a CPU that is not available to
offline. Fix this by testing the maximum present CPU instead.
Also, the test currently offlines the CPU and does not online it,
so fix this by onlining the CPU after the test.
Fixes: d89dffa976bc ("fault-injection: add selftests for cpu and memory hotplug")
Signed-off-by: Colin Ian King <colin.king(a)canonical.com>
Signed-off-by: Shuah Khan <shuah(a)kernel.org>
Signed-off-by: Sasha Levin <sashal(a)kernel.org>
---
.../selftests/cpu-hotplug/cpu-on-off-test.sh | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/tools/testing/selftests/cpu-hotplug/cpu-on-off-test.sh b/tools/testing/selftests/cpu-hotplug/cpu-on-off-test.sh
index f3a8933c12755..49ccd22933438 100755
--- a/tools/testing/selftests/cpu-hotplug/cpu-on-off-test.sh
+++ b/tools/testing/selftests/cpu-hotplug/cpu-on-off-test.sh
@@ -35,6 +35,10 @@ prerequisite()
exit 0
fi
+ present_cpus=`cat $SYSFS/devices/system/cpu/present`
+ present_max=${present_cpus##*-}
+ echo "present_cpus = $present_cpus present_max = $present_max"
+
echo -e "\t Cpus in online state: $online_cpus"
offline_cpus=`cat $SYSFS/devices/system/cpu/offline`
@@ -149,6 +153,8 @@ online_cpus=0
online_max=0
offline_cpus=0
offline_max=0
+present_cpus=0
+present_max=0
while getopts e:ahp: opt; do
case $opt in
@@ -188,9 +194,10 @@ if [ $allcpus -eq 0 ]; then
online_cpu_expect_success $online_max
if [[ $offline_cpus -gt 0 ]]; then
- echo -e "\t offline to online to offline: cpu $offline_max"
- online_cpu_expect_success $offline_max
- offline_cpu_expect_success $offline_max
+ echo -e "\t offline to online to offline: cpu $present_max"
+ online_cpu_expect_success $present_max
+ offline_cpu_expect_success $present_max
+ online_cpu $present_max
fi
exit 0
else
--
2.19.1
From: Fathi Boudra <fathi.boudra(a)linaro.org>
[ Upstream commit 7d4e591bc051d3382c45caaa2530969fb42ed23d ]
posix_timers fails to build due to undefined reference errors:
aarch64-linaro-linux-gcc --sysroot=/build/tmp-rpb-glibc/sysroots/hikey
-O2 -pipe -g -feliminate-unused-debug-types -O3 -Wl,-no-as-needed -Wall
-DKTEST -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -lrt -lpthread
posix_timers.c
-o /build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/timers/posix_timers
/tmp/cc1FTZzT.o: In function `check_timer_create':
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/timers/posix_timers.c:157:
undefined reference to `timer_create'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/timers/posix_timers.c:170:
undefined reference to `timer_settime'
collect2: error: ld returned 1 exit status
It's GNU Make and linker specific.
The default Makefile rule looks like:
$(CC) $(CFLAGS) $(LDFLAGS) $@ $^ $(LDLIBS)
When linking is done by gcc itself, no issue, but when it needs to be passed
to proper ld, only LDLIBS follows and then ld cannot know what libs to link
with.
More detail:
https://www.gnu.org/software/make/manual/html_node/Implicit-Variables.html
LDFLAGS
Extra flags to give to compilers when they are supposed to invoke the linker,
‘ld’, such as -L. Libraries (-lfoo) should be added to the LDLIBS variable
instead.
LDLIBS
Library flags or names given to compilers when they are supposed to invoke the
linker, ‘ld’. LOADLIBES is a deprecated (but still supported) alternative to
LDLIBS. Non-library linker flags, such as -L, should go in the LDFLAGS
variable.
https://lkml.org/lkml/2010/2/10/362
tools/perf: libraries must come after objects
Link order matters, use LDLIBS instead of LDFLAGS to properly link against
libpthread.
Signed-off-by: Denys Dmytriyenko <denys(a)ti.com>
Signed-off-by: Fathi Boudra <fathi.boudra(a)linaro.org>
Signed-off-by: Shuah Khan <shuah(a)kernel.org>
Signed-off-by: Sasha Levin <sashal(a)kernel.org>
---
tools/testing/selftests/timers/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/testing/selftests/timers/Makefile b/tools/testing/selftests/timers/Makefile
index c02683cfb6c9a..7656c7ce79d90 100644
--- a/tools/testing/selftests/timers/Makefile
+++ b/tools/testing/selftests/timers/Makefile
@@ -1,6 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
CFLAGS += -O3 -Wl,-no-as-needed -Wall
-LDFLAGS += -lrt -lpthread -lm
+LDLIBS += -lrt -lpthread -lm
# these are all "safe" tests that don't modify
# system time or require escalated privileges
--
2.19.1
From: Fathi Boudra <fathi.boudra(a)linaro.org>
[ Upstream commit 870f193d48c25a97d61a8e6c04e3c29a2c606850 ]
reuseport_bpf_numa fails to build due to undefined reference errors:
aarch64-linaro-linux-gcc
--sysroot=/build/tmp-rpb-glibc/sysroots/hikey -Wall
-Wl,--no-as-needed -O2 -g -I../../../../usr/include/ -Wl,-O1
-Wl,--hash-style=gnu -Wl,--as-needed -lnuma reuseport_bpf_numa.c
-o
/build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/net/reuseport_bpf_numa
/tmp/ccfUuExT.o: In function `send_from_node':
/build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/net/reuseport_bpf_numa.c:138:
undefined reference to `numa_run_on_node'
/tmp/ccfUuExT.o: In function `main':
/build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/net/reuseport_bpf_numa.c:230:
undefined reference to `numa_available'
/build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/net/reuseport_bpf_numa.c:233:
undefined reference to `numa_max_node'
It's GNU Make and linker specific.
The default Makefile rule looks like:
$(CC) $(CFLAGS) $(LDFLAGS) $@ $^ $(LDLIBS)
When linking is done by gcc itself, no issue, but when it needs to be passed
to proper ld, only LDLIBS follows and then ld cannot know what libs to link
with.
More detail:
https://www.gnu.org/software/make/manual/html_node/Implicit-Variables.html
LDFLAGS
Extra flags to give to compilers when they are supposed to invoke the linker,
‘ld’, such as -L. Libraries (-lfoo) should be added to the LDLIBS variable
instead.
LDLIBS
Library flags or names given to compilers when they are supposed to invoke the
linker, ‘ld’. LOADLIBES is a deprecated (but still supported) alternative to
LDLIBS. Non-library linker flags, such as -L, should go in the LDFLAGS
variable.
https://lkml.org/lkml/2010/2/10/362
tools/perf: libraries must come after objects
Link order matters, use LDLIBS instead of LDFLAGS to properly link against
libnuma.
Signed-off-by: Fathi Boudra <fathi.boudra(a)linaro.org>
Signed-off-by: Shuah Khan <shuah(a)kernel.org>
Signed-off-by: Sasha Levin <sashal(a)kernel.org>
---
tools/testing/selftests/net/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile
index 919aa2ac00af7..9a3764a1084ea 100644
--- a/tools/testing/selftests/net/Makefile
+++ b/tools/testing/selftests/net/Makefile
@@ -18,6 +18,6 @@ TEST_GEN_PROGS += reuseport_dualstack reuseaddr_conflict tls
KSFT_KHDR_INSTALL := 1
include ../lib.mk
-$(OUTPUT)/reuseport_bpf_numa: LDFLAGS += -lnuma
+$(OUTPUT)/reuseport_bpf_numa: LDLIBS += -lnuma
$(OUTPUT)/tcp_mmap: LDFLAGS += -lpthread
$(OUTPUT)/tcp_inq: LDFLAGS += -lpthread
--
2.19.1
From: Colin Ian King <colin.king(a)canonical.com>
[ Upstream commit 2b531b6137834a55857a337ac17510d6436b6fbb ]
The cpu-hotplug test assumes that we can offline the maximum CPU as
described by /sys/devices/system/cpu/offline. However, in the case
where the number of CPUs exceeds like kernel configuration then
the offline count can be greater than the present count and we end
up trying to test the offlining of a CPU that is not available to
offline. Fix this by testing the maximum present CPU instead.
Also, the test currently offlines the CPU and does not online it,
so fix this by onlining the CPU after the test.
Fixes: d89dffa976bc ("fault-injection: add selftests for cpu and memory hotplug")
Signed-off-by: Colin Ian King <colin.king(a)canonical.com>
Signed-off-by: Shuah Khan <shuah(a)kernel.org>
Signed-off-by: Sasha Levin <sashal(a)kernel.org>
---
.../selftests/cpu-hotplug/cpu-on-off-test.sh | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/tools/testing/selftests/cpu-hotplug/cpu-on-off-test.sh b/tools/testing/selftests/cpu-hotplug/cpu-on-off-test.sh
index bab13dd025a63..0d26b5e3f9667 100755
--- a/tools/testing/selftests/cpu-hotplug/cpu-on-off-test.sh
+++ b/tools/testing/selftests/cpu-hotplug/cpu-on-off-test.sh
@@ -37,6 +37,10 @@ prerequisite()
exit $ksft_skip
fi
+ present_cpus=`cat $SYSFS/devices/system/cpu/present`
+ present_max=${present_cpus##*-}
+ echo "present_cpus = $present_cpus present_max = $present_max"
+
echo -e "\t Cpus in online state: $online_cpus"
offline_cpus=`cat $SYSFS/devices/system/cpu/offline`
@@ -151,6 +155,8 @@ online_cpus=0
online_max=0
offline_cpus=0
offline_max=0
+present_cpus=0
+present_max=0
while getopts e:ahp: opt; do
case $opt in
@@ -190,9 +196,10 @@ if [ $allcpus -eq 0 ]; then
online_cpu_expect_success $online_max
if [[ $offline_cpus -gt 0 ]]; then
- echo -e "\t offline to online to offline: cpu $offline_max"
- online_cpu_expect_success $offline_max
- offline_cpu_expect_success $offline_max
+ echo -e "\t offline to online to offline: cpu $present_max"
+ online_cpu_expect_success $present_max
+ offline_cpu_expect_success $present_max
+ online_cpu $present_max
fi
exit 0
else
--
2.19.1