Fixes an issue where TX Timestamps are not arriving on the error queue
when UDP_SEGMENT CMSG type is combined with CMSG type SO_TIMESTAMPING.
This is version 2 which moves the tests to net-next.
Fred Klassen (1):
net/udp_gso: Allow TX timestamp with UDP GSO
net/ipv4/udp_offload.c | 4 ++++
1 file changed, 4 insertions(+)
--
2.11.0
Hi Linus,
Please pull the following Kselftest fixes update for Linux 5.2-rc2.
This Kselftest fixes update for Linux 5.2-rc2 consists of:
- 2 fixes to regressions introduced in kselftest Makefile test run
output refactoring work from Kees Cook.
- Adding Atom support to syscall_arg_fault test from Tong Bo.
diff is attached.
thanks,
-- Shuah
----------------------------------------------------------------
The following changes since commit a188339ca5a396acc588e5851ed7e19f66b0ebd9:
Linux 5.2-rc1 (2019-05-19 15:47:09 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
tags/linux-kselftest-5.2-rc2
for you to fetch changes up to fe48319243a626c860fd666ca032daacc2ba84a5:
selftests/timers: Add missing fflush(stdout) calls (2019-05-21
09:24:31 -0600)
----------------------------------------------------------------
linux-kselftest-5.2-rc2
This Kselftest fixes update for Linux 5.2-rc2 consists of:
- 2 fixes to regressions introduced in kselftest Makefile test run output
refactoring work from Kees Cook.
- Adding Atom support to syscall_arg_fault test from Tong Bo.
----------------------------------------------------------------
Kees Cook (2):
selftests: Remove forced unbuffering for test running
selftests/timers: Add missing fflush(stdout) calls
Tong Bo (1):
selftests/x86: Support Atom for syscall_arg_fault test
tools/testing/selftests/kselftest/runner.sh | 12 +-----------
tools/testing/selftests/timers/adjtick.c | 1 +
tools/testing/selftests/timers/leapcrash.c | 1 +
tools/testing/selftests/timers/mqueue-lat.c | 1 +
tools/testing/selftests/timers/nanosleep.c | 1 +
tools/testing/selftests/timers/nsleep-lat.c | 1 +
tools/testing/selftests/timers/raw_skew.c | 1 +
tools/testing/selftests/timers/set-tai.c | 1 +
tools/testing/selftests/timers/set-tz.c | 2 ++
tools/testing/selftests/timers/threadtest.c | 1 +
tools/testing/selftests/timers/valid-adjtimex.c | 2 ++
tools/testing/selftests/x86/syscall_arg_fault.c | 10 ++++++++--
12 files changed, 21 insertions(+), 13 deletions(-)
----------------------------------------------------------------
This series of patches move the commonly used bpf_printk macro to
bpf_helpers.h which is already included in all BPF programs which
defined that macro on their own.
v1->v2:
- If HBM_DEBUG is not defined in hbm sample, undefine bpf_printk and set
an empty macro for it.
Michal Rostecki (2):
selftests: bpf: Move bpf_printk to bpf_helpers.h
samples: bpf: Do not define bpf_printk macro
samples/bpf/hbm_kern.h | 11 ++---------
samples/bpf/tcp_basertt_kern.c | 7 -------
samples/bpf/tcp_bufs_kern.c | 7 -------
samples/bpf/tcp_clamp_kern.c | 7 -------
samples/bpf/tcp_cong_kern.c | 7 -------
samples/bpf/tcp_iw_kern.c | 7 -------
samples/bpf/tcp_rwnd_kern.c | 7 -------
samples/bpf/tcp_synrto_kern.c | 7 -------
samples/bpf/tcp_tos_reflect_kern.c | 7 -------
samples/bpf/xdp_sample_pkts_kern.c | 7 -------
tools/testing/selftests/bpf/bpf_helpers.h | 8 ++++++++
.../testing/selftests/bpf/progs/sockmap_parse_prog.c | 7 -------
.../selftests/bpf/progs/sockmap_tcp_msg_prog.c | 7 -------
.../selftests/bpf/progs/sockmap_verdict_prog.c | 7 -------
.../testing/selftests/bpf/progs/test_lwt_seg6local.c | 7 -------
tools/testing/selftests/bpf/progs/test_xdp_noinline.c | 7 -------
tools/testing/selftests/bpf/test_sockmap_kern.h | 7 -------
17 files changed, 10 insertions(+), 114 deletions(-)
--
2.21.0
On 23/05/2019 22:29:36+0530, Jeffrin Thalakkottoor wrote:
> I get the following result when i run "rtctest"
> please see the following....
> -----------------x------------------------x-----------------
> $pwd
> /home/jeffrin/upstream/linux-kselftest/tools/testing/selftests/rtc
> $./rtctest
> [==========] Running 7 tests from 2 test cases.
> [ RUN ] rtc.date_read
> rtctest.c:32:rtc.date_read:Expected -1 (18446744073709551615) !=
> self->fd (18446744073709551615)
> rtc.date_read: Test terminated by assertion
Your user probably doesn't have access to the rtc device file.
--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
This adds the close_range() syscall. It allows to efficiently close a range
of file descriptors up to all file descriptors of a calling task.
The syscall came up in a recent discussion around the new mount API and
making new file descriptor types cloexec by default. During this
discussion, Al suggested the close_range() syscall (cf. [1]). Note, a
syscall in this manner has been requested by various people over time.
First, it helps to close all file descriptors of an exec()ing task. This
can be done safely via (quoting Al's example from [1] verbatim):
/* that exec is sensitive */
unshare(CLONE_FILES);
/* we don't want anything past stderr here */
close_range(3, ~0U);
execve(....);
The code snippet above is one way of working around the problem that file
descriptors are not cloexec by default. This is aggravated by the fact that
we can't just switch them over without massively regressing userspace. For
a whole class of programs having an in-kernel method of closing all file
descriptors is very helpful (e.g. demons, service managers, programming
language standard libraries, container managers etc.).
(Please note, unshare(CLONE_FILES) should only be needed if the calling
task is multi-threaded and shares the file descriptor table with another
thread in which case two threads could race with one thread allocating
file descriptors and the other one closing them via close_range(). For the
general case close_range() before the execve() is sufficient.)
Second, it allows userspace to avoid implementing closing all file
descriptors by parsing through /proc/<pid>/fd/* and calling close() on each
file descriptor. From looking at various large(ish) userspace code bases
this or similar patterns are very common in:
- service managers (cf. [4])
- libcs (cf. [6])
- container runtimes (cf. [5])
- programming language runtimes/standard libraries
- Python (cf. [2])
- Rust (cf. [7], [8])
As Dmitry pointed out there's even a long-standing glibc bug about missing
kernel support for this task (cf. [3]).
In addition, the syscall will also work for tasks that do not have procfs
mounted and on kernels that do not have procfs support compiled in. In such
situations the only way to make sure that all file descriptors are closed
is to call close() on each file descriptor up to UINT_MAX or RLIMIT_NOFILE,
OPEN_MAX trickery (cf. comment [8] on Rust).
The performance is striking. For good measure, comparing the following
simple close_all_fds() userspace implementation that is essentially just
glibc's version in [6]:
static int close_all_fds(void)
{
int dir_fd;
DIR *dir;
struct dirent *direntp;
dir = opendir("/proc/self/fd");
if (!dir)
return -1;
dir_fd = dirfd(dir);
while ((direntp = readdir(dir))) {
int fd;
if (strcmp(direntp->d_name, ".") == 0)
continue;
if (strcmp(direntp->d_name, "..") == 0)
continue;
fd = atoi(direntp->d_name);
if (fd == dir_fd || fd == 0 || fd == 1 || fd == 2)
continue;
close(fd);
}
closedir(dir);
return 0;
}
to close_range() yields:
1. closing 4 open files:
- close_all_fds(): ~280 us
- close_range(): ~24 us
2. closing 1000 open files:
- close_all_fds(): ~5000 us
- close_range(): ~800 us
close_range() is designed to allow for some flexibility. Specifically, it
does not simply always close all open file descriptors of a task. Instead,
callers can specify an upper bound.
This is e.g. useful for scenarios where specific file descriptors are
created with well-known numbers that are supposed to be excluded from
getting closed.
For extra paranoia close_range() comes with a flags argument. This can e.g.
be used to implement extension. Once can imagine userspace wanting to stop
at the first error instead of ignoring errors under certain circumstances.
There might be other valid ideas in the future. In any case, a flag
argument doesn't hurt and keeps us on the safe side.
>From an implementation side this is kept rather dumb. It saw some input
from David and Jann but all nonsense is obviously my own!
- Errors to close file descriptors are currently ignored. (Could be changed
by setting a flag in the future if needed.)
- __close_range() is a rather simplistic wrapper around __close_fd().
My reasoning behind this is based on the nature of how __close_fd() needs
to release an fd. But maybe I misunderstood specifics:
We take the files_lock and rcu-dereference the fdtable of the calling
task, we find the entry in the fdtable, get the file and need to release
files_lock before calling filp_close().
In the meantime the fdtable might have been altered so we can't just
retake the spinlock and keep the old rcu-reference of the fdtable
around. Instead we need to grab a fresh reference to the fdtable.
If my reasoning is correct then there's really no point in fancyfying
__close_range(): We just need to rcu-dereference the fdtable of the
calling task once to cap the max_fd value correctly and then go on
calling __close_fd() in a loop.
/* References */
[1]: https://lore.kernel.org/lkml/20190516165021.GD17978@ZenIV.linux.org.uk/
[2]: https://github.com/python/cpython/blob/9e4f2f3a6b8ee995c365e86d976937c141d8…
[3]: https://sourceware.org/bugzilla/show_bug.cgi?id=10353#c7
[4]: https://github.com/systemd/systemd/blob/5238e9575906297608ff802a27e2ff9effa…
[5]: https://github.com/lxc/lxc/blob/ddf4b77e11a4d08f09b7b9cd13e593f8c047edc5/sr…
[6]: https://sourceware.org/git/?p=glibc.git;a=blob;f=sysdeps/unix/sysv/linux/gr…
Note that this is an internal implementation that is not exported.
Currently, libc seems to not provide an exported version of this
because of missing kernel support to do this.
[7]: https://github.com/rust-lang/rust/issues/12148
[8]: https://github.com/rust-lang/rust/blob/5f47c0613ed4eb46fca3633c1297364c09e5…
Rust's solution is slightly different but is equally unperformant.
Rust calls getdtablesize() which is a glibc library function that
simply returns the current RLIMIT_NOFILE or OPEN_MAX values. Rust then
goes on to call close() on each fd. That's obviously overkill for most
tasks. Rarely, tasks - especially non-demons - hit RLIMIT_NOFILE or
OPEN_MAX.
Let's be nice and assume an unprivileged user with RLIMIT_NOFILE set
to 1024. Even in this case, there's a very high chance that in the
common case Rust is calling the close() syscall 1021 times pointlessly
if the task just has 0, 1, and 2 open.
Suggested-by: Al Viro <viro(a)zeniv.linux.org.uk>
Signed-off-by: Christian Brauner <christian(a)brauner.io>
Cc: Arnd Bergmann <arnd(a)arndb.de>
Cc: Jann Horn <jannh(a)google.com>
Cc: David Howells <dhowells(a)redhat.com>
Cc: Dmitry V. Levin <ldv(a)altlinux.org>
Cc: Oleg Nesterov <oleg(a)redhat.com>
Cc: Linus Torvalds <torvalds(a)linux-foundation.org>
Cc: Florian Weimer <fweimer(a)redhat.com>
Cc: linux-api(a)vger.kernel.org
---
v1:
- Linus Torvalds <torvalds(a)linux-foundation.org>:
- add cond_resched() to yield cpu when closing a lot of file descriptors
- Al Viro <viro(a)zeniv.linux.org.uk>:
- add cond_resched() to yield cpu when closing a lot of file descriptors
---
arch/alpha/kernel/syscalls/syscall.tbl | 1 +
arch/arm/tools/syscall.tbl | 1 +
arch/arm64/include/asm/unistd32.h | 2 +
arch/ia64/kernel/syscalls/syscall.tbl | 1 +
arch/m68k/kernel/syscalls/syscall.tbl | 1 +
arch/microblaze/kernel/syscalls/syscall.tbl | 1 +
arch/mips/kernel/syscalls/syscall_n32.tbl | 1 +
arch/mips/kernel/syscalls/syscall_n64.tbl | 1 +
arch/mips/kernel/syscalls/syscall_o32.tbl | 1 +
arch/parisc/kernel/syscalls/syscall.tbl | 1 +
arch/powerpc/kernel/syscalls/syscall.tbl | 1 +
arch/s390/kernel/syscalls/syscall.tbl | 1 +
arch/sh/kernel/syscalls/syscall.tbl | 1 +
arch/sparc/kernel/syscalls/syscall.tbl | 1 +
arch/x86/entry/syscalls/syscall_32.tbl | 1 +
arch/x86/entry/syscalls/syscall_64.tbl | 1 +
arch/xtensa/kernel/syscalls/syscall.tbl | 1 +
fs/file.c | 63 ++++++++++++++++++---
fs/open.c | 20 +++++++
include/linux/fdtable.h | 2 +
include/linux/syscalls.h | 2 +
include/uapi/asm-generic/unistd.h | 4 +-
22 files changed, 100 insertions(+), 9 deletions(-)
diff --git a/arch/alpha/kernel/syscalls/syscall.tbl b/arch/alpha/kernel/syscalls/syscall.tbl
index 9e7704e44f6d..b55d93af8096 100644
--- a/arch/alpha/kernel/syscalls/syscall.tbl
+++ b/arch/alpha/kernel/syscalls/syscall.tbl
@@ -473,3 +473,4 @@
541 common fsconfig sys_fsconfig
542 common fsmount sys_fsmount
543 common fspick sys_fspick
+545 common close_range sys_close_range
diff --git a/arch/arm/tools/syscall.tbl b/arch/arm/tools/syscall.tbl
index aaf479a9e92d..0125c97c75dd 100644
--- a/arch/arm/tools/syscall.tbl
+++ b/arch/arm/tools/syscall.tbl
@@ -447,3 +447,4 @@
431 common fsconfig sys_fsconfig
432 common fsmount sys_fsmount
433 common fspick sys_fspick
+435 common close_range sys_close_range
diff --git a/arch/arm64/include/asm/unistd32.h b/arch/arm64/include/asm/unistd32.h
index c39e90600bb3..9a3270d29b42 100644
--- a/arch/arm64/include/asm/unistd32.h
+++ b/arch/arm64/include/asm/unistd32.h
@@ -886,6 +886,8 @@ __SYSCALL(__NR_fsconfig, sys_fsconfig)
__SYSCALL(__NR_fsmount, sys_fsmount)
#define __NR_fspick 433
__SYSCALL(__NR_fspick, sys_fspick)
+#define __NR_close_range 435
+__SYSCALL(__NR_close_range, sys_close_range)
/*
* Please add new compat syscalls above this comment and update
diff --git a/arch/ia64/kernel/syscalls/syscall.tbl b/arch/ia64/kernel/syscalls/syscall.tbl
index e01df3f2f80d..1a90b464e96f 100644
--- a/arch/ia64/kernel/syscalls/syscall.tbl
+++ b/arch/ia64/kernel/syscalls/syscall.tbl
@@ -354,3 +354,4 @@
431 common fsconfig sys_fsconfig
432 common fsmount sys_fsmount
433 common fspick sys_fspick
+435 common close_range sys_close_range
diff --git a/arch/m68k/kernel/syscalls/syscall.tbl b/arch/m68k/kernel/syscalls/syscall.tbl
index 7e3d0734b2f3..2dee2050f9ef 100644
--- a/arch/m68k/kernel/syscalls/syscall.tbl
+++ b/arch/m68k/kernel/syscalls/syscall.tbl
@@ -433,3 +433,4 @@
431 common fsconfig sys_fsconfig
432 common fsmount sys_fsmount
433 common fspick sys_fspick
+435 common close_range sys_close_range
diff --git a/arch/microblaze/kernel/syscalls/syscall.tbl b/arch/microblaze/kernel/syscalls/syscall.tbl
index 26339e417695..923ef69e5a76 100644
--- a/arch/microblaze/kernel/syscalls/syscall.tbl
+++ b/arch/microblaze/kernel/syscalls/syscall.tbl
@@ -439,3 +439,4 @@
431 common fsconfig sys_fsconfig
432 common fsmount sys_fsmount
433 common fspick sys_fspick
+435 common close_range sys_close_range
diff --git a/arch/mips/kernel/syscalls/syscall_n32.tbl b/arch/mips/kernel/syscalls/syscall_n32.tbl
index 0e2dd68ade57..967ed9de51cd 100644
--- a/arch/mips/kernel/syscalls/syscall_n32.tbl
+++ b/arch/mips/kernel/syscalls/syscall_n32.tbl
@@ -372,3 +372,4 @@
431 n32 fsconfig sys_fsconfig
432 n32 fsmount sys_fsmount
433 n32 fspick sys_fspick
+435 n32 close_range sys_close_range
diff --git a/arch/mips/kernel/syscalls/syscall_n64.tbl b/arch/mips/kernel/syscalls/syscall_n64.tbl
index 5eebfa0d155c..71de731102b1 100644
--- a/arch/mips/kernel/syscalls/syscall_n64.tbl
+++ b/arch/mips/kernel/syscalls/syscall_n64.tbl
@@ -348,3 +348,4 @@
431 n64 fsconfig sys_fsconfig
432 n64 fsmount sys_fsmount
433 n64 fspick sys_fspick
+435 n64 close_range sys_close_range
diff --git a/arch/mips/kernel/syscalls/syscall_o32.tbl b/arch/mips/kernel/syscalls/syscall_o32.tbl
index 3cc1374e02d0..5a325ab29f88 100644
--- a/arch/mips/kernel/syscalls/syscall_o32.tbl
+++ b/arch/mips/kernel/syscalls/syscall_o32.tbl
@@ -421,3 +421,4 @@
431 o32 fsconfig sys_fsconfig
432 o32 fsmount sys_fsmount
433 o32 fspick sys_fspick
+435 o32 close_range sys_close_range
diff --git a/arch/parisc/kernel/syscalls/syscall.tbl b/arch/parisc/kernel/syscalls/syscall.tbl
index c9e377d59232..dcc0a0879139 100644
--- a/arch/parisc/kernel/syscalls/syscall.tbl
+++ b/arch/parisc/kernel/syscalls/syscall.tbl
@@ -430,3 +430,4 @@
431 common fsconfig sys_fsconfig
432 common fsmount sys_fsmount
433 common fspick sys_fspick
+435 common close_range sys_close_range
diff --git a/arch/powerpc/kernel/syscalls/syscall.tbl b/arch/powerpc/kernel/syscalls/syscall.tbl
index 103655d84b4b..ba2c1f078cbd 100644
--- a/arch/powerpc/kernel/syscalls/syscall.tbl
+++ b/arch/powerpc/kernel/syscalls/syscall.tbl
@@ -515,3 +515,4 @@
431 common fsconfig sys_fsconfig
432 common fsmount sys_fsmount
433 common fspick sys_fspick
+435 common close_range sys_close_range
diff --git a/arch/s390/kernel/syscalls/syscall.tbl b/arch/s390/kernel/syscalls/syscall.tbl
index e822b2964a83..d7c9043d2902 100644
--- a/arch/s390/kernel/syscalls/syscall.tbl
+++ b/arch/s390/kernel/syscalls/syscall.tbl
@@ -436,3 +436,4 @@
431 common fsconfig sys_fsconfig sys_fsconfig
432 common fsmount sys_fsmount sys_fsmount
433 common fspick sys_fspick sys_fspick
+435 common close_range sys_close_range sys_close_range
diff --git a/arch/sh/kernel/syscalls/syscall.tbl b/arch/sh/kernel/syscalls/syscall.tbl
index 016a727d4357..9b5e6bf0ce32 100644
--- a/arch/sh/kernel/syscalls/syscall.tbl
+++ b/arch/sh/kernel/syscalls/syscall.tbl
@@ -436,3 +436,4 @@
431 common fsconfig sys_fsconfig
432 common fsmount sys_fsmount
433 common fspick sys_fspick
+435 common close_range sys_close_range
diff --git a/arch/sparc/kernel/syscalls/syscall.tbl b/arch/sparc/kernel/syscalls/syscall.tbl
index e047480b1605..8c674a1e0072 100644
--- a/arch/sparc/kernel/syscalls/syscall.tbl
+++ b/arch/sparc/kernel/syscalls/syscall.tbl
@@ -479,3 +479,4 @@
431 common fsconfig sys_fsconfig
432 common fsmount sys_fsmount
433 common fspick sys_fspick
+435 common close_range sys_close_range
diff --git a/arch/x86/entry/syscalls/syscall_32.tbl b/arch/x86/entry/syscalls/syscall_32.tbl
index ad968b7bac72..7f7a89a96707 100644
--- a/arch/x86/entry/syscalls/syscall_32.tbl
+++ b/arch/x86/entry/syscalls/syscall_32.tbl
@@ -438,3 +438,4 @@
431 i386 fsconfig sys_fsconfig __ia32_sys_fsconfig
432 i386 fsmount sys_fsmount __ia32_sys_fsmount
433 i386 fspick sys_fspick __ia32_sys_fspick
+435 i386 close_range sys_close_range __ia32_sys_close_range
diff --git a/arch/x86/entry/syscalls/syscall_64.tbl b/arch/x86/entry/syscalls/syscall_64.tbl
index b4e6f9e6204a..0f7d47ae921c 100644
--- a/arch/x86/entry/syscalls/syscall_64.tbl
+++ b/arch/x86/entry/syscalls/syscall_64.tbl
@@ -355,6 +355,7 @@
431 common fsconfig __x64_sys_fsconfig
432 common fsmount __x64_sys_fsmount
433 common fspick __x64_sys_fspick
+435 common close_range __x64_sys_close_range
#
# x32-specific system call numbers start at 512 to avoid cache impact
diff --git a/arch/xtensa/kernel/syscalls/syscall.tbl b/arch/xtensa/kernel/syscalls/syscall.tbl
index 5fa0ee1c8e00..b489532265d0 100644
--- a/arch/xtensa/kernel/syscalls/syscall.tbl
+++ b/arch/xtensa/kernel/syscalls/syscall.tbl
@@ -404,3 +404,4 @@
431 common fsconfig sys_fsconfig
432 common fsmount sys_fsmount
433 common fspick sys_fspick
+435 common close_range sys_close_range
diff --git a/fs/file.c b/fs/file.c
index 3da91a112bab..54945efa046e 100644
--- a/fs/file.c
+++ b/fs/file.c
@@ -615,12 +615,9 @@ void fd_install(unsigned int fd, struct file *file)
EXPORT_SYMBOL(fd_install);
-/*
- * The same warnings as for __alloc_fd()/__fd_install() apply here...
- */
-int __close_fd(struct files_struct *files, unsigned fd)
+static struct file *pick_file(struct files_struct *files, unsigned fd)
{
- struct file *file;
+ struct file *file = NULL;
struct fdtable *fdt;
spin_lock(&files->file_lock);
@@ -632,15 +629,65 @@ int __close_fd(struct files_struct *files, unsigned fd)
goto out_unlock;
rcu_assign_pointer(fdt->fd[fd], NULL);
__put_unused_fd(files, fd);
- spin_unlock(&files->file_lock);
- return filp_close(file, files);
out_unlock:
spin_unlock(&files->file_lock);
- return -EBADF;
+ return file;
+}
+
+/*
+ * The same warnings as for __alloc_fd()/__fd_install() apply here...
+ */
+int __close_fd(struct files_struct *files, unsigned fd)
+{
+ struct file *file;
+
+ file = pick_file(files, fd);
+ if (!file)
+ return -EBADF;
+
+ return filp_close(file, files);
}
EXPORT_SYMBOL(__close_fd); /* for ksys_close() */
+/**
+ * __close_range() - Close all file descriptors in a given range.
+ *
+ * @fd: starting file descriptor to close
+ * @max_fd: last file descriptor to close
+ *
+ * This closes a range of file descriptors. All file descriptors
+ * from @fd up to and including @max_fd are closed.
+ */
+int __close_range(struct files_struct *files, unsigned fd, unsigned max_fd)
+{
+ unsigned int cur_max;
+
+ if (fd > max_fd)
+ return -EINVAL;
+
+ rcu_read_lock();
+ cur_max = files_fdtable(files)->max_fds;
+ rcu_read_unlock();
+
+ /* cap to last valid index into fdtable */
+ if (max_fd >= cur_max)
+ max_fd = cur_max - 1;
+
+ while (fd <= max_fd) {
+ struct file *file;
+
+ file = pick_file(files, fd++);
+ if (!file)
+ continue;
+
+ filp_close(file, files);
+ cond_resched();
+ }
+
+ return 0;
+}
+
/*
* variant of __close_fd that gets a ref on the file for later fput
*/
diff --git a/fs/open.c b/fs/open.c
index 9c7d724a6f67..c7baaee7aa47 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -1174,6 +1174,26 @@ SYSCALL_DEFINE1(close, unsigned int, fd)
return retval;
}
+/**
+ * close_range() - Close all file descriptors in a given range.
+ *
+ * @fd: starting file descriptor to close
+ * @max_fd: last file descriptor to close
+ * @flags: reserved for future extensions
+ *
+ * This closes a range of file descriptors. All file descriptors
+ * from @fd up to and including @max_fd are closed.
+ * Currently, errors to close a given file descriptor are ignored.
+ */
+SYSCALL_DEFINE3(close_range, unsigned int, fd, unsigned int, max_fd,
+ unsigned int, flags)
+{
+ if (flags)
+ return -EINVAL;
+
+ return __close_range(current->files, fd, max_fd);
+}
+
/*
* This routine simulates a hangup on the tty, to arrange that users
* are given clean terminals at login time.
diff --git a/include/linux/fdtable.h b/include/linux/fdtable.h
index f07c55ea0c22..fcd07181a365 100644
--- a/include/linux/fdtable.h
+++ b/include/linux/fdtable.h
@@ -121,6 +121,8 @@ extern void __fd_install(struct files_struct *files,
unsigned int fd, struct file *file);
extern int __close_fd(struct files_struct *files,
unsigned int fd);
+extern int __close_range(struct files_struct *files, unsigned int fd,
+ unsigned int max_fd);
extern int __close_fd_get_file(unsigned int fd, struct file **res);
extern struct kmem_cache *files_cachep;
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index e2870fe1be5b..c0189e223255 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -441,6 +441,8 @@ asmlinkage long sys_fchown(unsigned int fd, uid_t user, gid_t group);
asmlinkage long sys_openat(int dfd, const char __user *filename, int flags,
umode_t mode);
asmlinkage long sys_close(unsigned int fd);
+asmlinkage long sys_close_range(unsigned int fd, unsigned int max_fd,
+ unsigned int flags);
asmlinkage long sys_vhangup(void);
/* fs/pipe.c */
diff --git a/include/uapi/asm-generic/unistd.h b/include/uapi/asm-generic/unistd.h
index a87904daf103..3f36c8745d24 100644
--- a/include/uapi/asm-generic/unistd.h
+++ b/include/uapi/asm-generic/unistd.h
@@ -844,9 +844,11 @@ __SYSCALL(__NR_fsconfig, sys_fsconfig)
__SYSCALL(__NR_fsmount, sys_fsmount)
#define __NR_fspick 433
__SYSCALL(__NR_fspick, sys_fspick)
+#define __NR_close_range 435
+__SYSCALL(__NR_close_range, sys_close_range)
#undef __NR_syscalls
-#define __NR_syscalls 434
+#define __NR_syscalls 436
/*
* 32 bit systems traditionally used different
--
2.21.0
Hi,
Here are patches for making sure the ftracetest testcases
are checkbashisms clean.
This actually needs a patch from Juerg, "selftests/ftrace:
Make the coloring POSIX compliant" to complete the work.
http://lkml.kernel.org/r/20190220161333.28109-1-juergh@canonical.com
(Note that this is still under development)
So as Juerg pointed, recently ftracetest becomes not POSIX
compliant, and such kind of issues happened repeatedly.
To avoid those anymore, I decided to introduce a testcase
which runs checkbasisms on ftracetest and its testcases.
I think this can help us to find out whether it was
written in a way out of POSIX.
Thank you,
---
Masami Hiramatsu (2):
selftests/ftrace: Make a script checkbashisms clean
selftests/ftrace: Add checkbashisms meta-testcase
tools/testing/selftests/ftrace/ftracetest | 1 +
.../ftrace/test.d/kprobe/kprobe_ftrace.tc | 2 +-
.../selftests/ftrace/test.d/selftest/bashisms.tc | 21 ++++++++++++++++++++
3 files changed, 23 insertions(+), 1 deletion(-)
create mode 100644 tools/testing/selftests/ftrace/test.d/selftest/bashisms.tc
--
Masami Hiramatsu (Linaro) <mhiramat(a)kernel.org>
Hi,
Commit a745f7af3cbd ("selftests/harness: Add 30 second timeout per
test") wrongly assumed that no individual test would run for more than
30 seconds and this silently broke rtctest.
Please consider the following patches as fixes for v5.2 to avoid having
any non working release.
Thanks,
Alexandre Belloni (2):
selftests/harness: Allow test to configure timeout
selftests: rtc: rtctest: specify timeouts
tools/testing/selftests/kselftest_harness.h | 17 ++++++++++++-----
tools/testing/selftests/rtc/rtctest.c | 6 +++---
2 files changed, 15 insertions(+), 8 deletions(-)
--
2.21.0