March 2020 - Linux-kselftest-mirror

[PATCH V2 0/3] riscv: add support for restartable sequence

by Vincent Chen

Add RSEQ, restartable sequence, support and related selftest to RISCV. The Kconfig option HAVE_REGS_AND_STACK_ACCESS_API is also required by RSEQ because RSEQ will modify the content of pt_regs.sepc through instruction_pointer_set() during the fixup procedure. In order to select the config HAVE_REGS_AND_STACK_ACCESS_API, the missing APIs for accessing pt_regs are also added in this patch set. The relevant RSEQ tests in kselftest require the Binutils patch "RISC-V: Fix linker problems with TLS copy relocs" to avoid placing PREINIT_ARRAY and TLS variable of librseq.so at the same address. https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=commit;h=3e7bd7f… A segmental fault will happen if binutils misses this patch. Patrick Stählin (1): riscv: add required functions to enable HAVE_REGS_AND_STACK_ACCESS_API Vincent Chen (2): riscv: Add support for restartable sequence rseq/selftests: Add support for riscv Changes since v1: 1. Use the correct register name to access pt_regs arch/riscv/Kconfig | 2 + arch/riscv/include/asm/ptrace.h | 29 +- arch/riscv/kernel/entry.S | 4 + arch/riscv/kernel/ptrace.c | 99 +++++ arch/riscv/kernel/signal.c | 2 + tools/testing/selftests/rseq/param_test.c | 23 ++ tools/testing/selftests/rseq/rseq-riscv.h | 622 ++++++++++++++++++++++++++++++ tools/testing/selftests/rseq/rseq.h | 2 + 8 files changed, 782 insertions(+), 1 deletion(-) create mode 100644 tools/testing/selftests/rseq/rseq-riscv.h -- 2.7.4

3 years, 5 months

3
8
0 0

[RFC PATCH 0/1] selftests/run_kselftest.sh: make each test individually selectable

by Hangbin Liu

Hi, this patch enhanced the run_kselftest.sh to make the tests individually selectable. I'm not sure the if I could add the reuslt in the patch commit, as the log is too long. So I just put the result to the cover-letter: Note: I use `tr -s "/-" "_"` to cover the path name in tests to function name. e.g. networking/timestamping -> networking_timestamping. I'm not sure if it's legal in Makefile. Before the patch: ]# ./kselftest_install.sh /tmp/kselftests ]# cat /tmp/kselftests/run_kselftest.sh #!/bin/sh BASE_DIR=$(realpath $(dirname $0)) cd $BASE_DIR . ./kselftest/runner.sh ROOT=$PWD if [ "$1" = "--summary" ]; then logfile=$BASE_DIR/output.log cat /dev/null > $logfile fi [ -w /dev/kmsg ] && echo "kselftest: Running tests in android" >> /dev/kmsg cd android run_many \ "run.sh" cd $ROOT ...<snip>... [ -w /dev/kmsg ] && echo "kselftest: Running tests in zram" >> /dev/kmsg cd zram run_many \ "zram.sh" cd $ROOT After the patch: ]# ./kselftest_install.sh /tmp/kselftests ]# cat /tmp/kselftests/run_kselftest.sh #!/bin/sh BASE_DIR=$(realpath $(dirname $0)) . ./kselftest/runner.sh TESTS="android ...<snip>... zram" run_android() { [ -w /dev/kmsg ] && echo "kselftest: Running tests in android" >> /dev/kmsg cd android run_many \ "run.sh" cd $ROOT } ...<snip>... run_zram() { [ -w /dev/kmsg ] && echo "kselftest: Running tests in zram" >> /dev/kmsg cd zram run_many \ "zram.sh" cd $ROOT } usage() { cat <<EOF usage: ${0##*/} OPTS -s | --summary Only print summary info and put detailed log in output.log -t | --tests Test name you want to run specifically -h | --help Show this usage info EOF } while true; do case "$1" in -s | --summary ) logfile=$BASE_DIR/output.log; cat /dev/null > $logfile; shift ;; -t | --tests ) TESTS=$2; shift 2 ;; -h | --help ) usage; exit 0;; "" ) break;; * ) usage; exit 1;; esac done cd $BASE_DIR ROOT=$PWD for test in $TESTS; do run_$test done Hangbin Liu (1): selftests/run_kselftest.sh: make each test individually selectable tools/testing/selftests/Makefile | 48 +++++++++++++++++++++++++------- tools/testing/selftests/lib.mk | 2 +- 2 files changed, 39 insertions(+), 11 deletions(-) -- 2.19.2

4 years, 3 months

3
8
0 0

[v2] dma-buf: heaps: bugfix for selftest failure

by Leon He

From: Leon He <leon.he(a)unisoc.com> There are two errors in the dmabuf-heap selftest: 1. The 'char name[5]' was not initialized to zero, which will cause strcmp(name, "vgem") failed in check_vgem(). 2. The return value of test_alloc_errors() should be reversed, other- wise the while loop in main() will be broken. Signed-off-by: Leon He <leon.he(a)unisoc.com> --- tools/testing/selftests/dmabuf-heaps/dmabuf-heap.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/dmabuf-heaps/dmabuf-heap.c b/tools/testing/selftests/dmabuf-heaps/dmabuf-heap.c index cd5e1f6..836b185 100644 --- a/tools/testing/selftests/dmabuf-heaps/dmabuf-heap.c +++ b/tools/testing/selftests/dmabuf-heaps/dmabuf-heap.c @@ -22,7 +22,7 @@ static int check_vgem(int fd) { drm_version_t version = { 0 }; - char name[5]; + char name[5] = { 0 }; int ret; version.name_len = 4; @@ -357,7 +357,7 @@ static int test_alloc_errors(char *heap_name) if (heap_fd >= 0) close(heap_fd); - return ret; + return !ret; } int main(void) -- 2.7.4

4 years, 3 months

4
3
0 0

[PATCHv3] selftests/timers: Turn off timeout setting

by Po-Hsu Lin

The following 4 tests in timers can take longer than the default 45 seconds that added in commit 852c8cbf34d3 ("selftests/kselftest/runner.sh: Add 45 second timeout per test") to run: * nsleep-lat - 2m7.350s * set-timer-lat - 2m0.66s * inconsistency-check - 1m45.074s * raw_skew - 2m0.013s Thus they will be marked as failed with the current 45s setting: not ok 3 selftests: timers: nsleep-lat # TIMEOUT not ok 4 selftests: timers: set-timer-lat # TIMEOUT not ok 6 selftests: timers: inconsistency-check # TIMEOUT not ok 7 selftests: timers: raw_skew # TIMEOUT Disable the timeout setting for timers can make these tests finish properly: ok 3 selftests: timers: nsleep-lat ok 4 selftests: timers: set-timer-lat ok 6 selftests: timers: inconsistency-check ok 7 selftests: timers: raw_skew https://bugs.launchpad.net/bugs/1864626 Fixes: 852c8cbf34d3 ("selftests/kselftest/runner.sh: Add 45 second timeout per test") Signed-off-by: Po-Hsu Lin <po-hsu.lin(a)canonical.com> --- tools/testing/selftests/timers/Makefile | 1 + tools/testing/selftests/timers/settings | 1 + 2 files changed, 2 insertions(+) create mode 100644 tools/testing/selftests/timers/settings diff --git a/tools/testing/selftests/timers/Makefile b/tools/testing/selftests/timers/Makefile index 7656c7c..0e73a16 100644 --- a/tools/testing/selftests/timers/Makefile +++ b/tools/testing/selftests/timers/Makefile @@ -13,6 +13,7 @@ DESTRUCTIVE_TESTS = alarmtimer-suspend valid-adjtimex adjtick change_skew \ TEST_GEN_PROGS_EXTENDED = $(DESTRUCTIVE_TESTS) +TEST_FILES := settings include ../lib.mk diff --git a/tools/testing/selftests/timers/settings b/tools/testing/selftests/timers/settings new file mode 100644 index 0000000..e7b9417 --- /dev/null +++ b/tools/testing/selftests/timers/settings @@ -0,0 +1 @@ +timeout=0 -- 2.7.4

4 years, 4 months

3
4
0 0

[PATCH v3 0/7] kunit: create a centralized executor to dispatch all KUnit tests

by Brendan Higgins

## TL;DR This patchset adds a centralized executor to dispatch tests rather than relying on late_initcall to schedule each test suite separately along with a couple of new features that depend on it. Also, sorry for the delay in getting this new revision out. I have been really busy for the past couple weeks. ## What am I trying to do? Conceptually, I am trying to provide a mechanism by which test suites can be grouped together so that they can be reasoned about collectively. The last two of three patches in this series add features which depend on this: PATCH 5/7 Prints out a test plan[1] right before KUnit tests are run; this is valuable because it makes it possible for a test harness to detect whether the number of tests run matches the number of tests expected to be run, ensuring that no tests silently failed. The test plan includes a count of tests that will run. With the centralized executor, the tests are located in a single data structure and thus can be counted. PATCH 6/7 Add a new kernel command-line option which allows the user to specify that the kernel poweroff, halt, or reboot after completing all KUnit tests; this is very handy for running KUnit tests on UML or a VM so that the UML/VM process exits cleanly immediately after running all tests without needing a special initramfs. The centralized executor provides a definitive point when all tests have completed and the poweroff, halt, or reboot could occur. In addition, by dispatching tests from a single location, we can guarantee that all KUnit tests run after late_init is complete, which was a concern during the initial KUnit patchset review (this has not been a problem in practice, but resolving with certainty is nevertheless desirable). Other use cases for this exist, but the above features should provide an idea of the value that this could provide. ## Changes since last revision: - On patch 7/7, I added some additional wording around the kunit_shutdown command line option explaining that it runs after built-in tests as suggested by Frank. - On the coverletter, I improved some wording and added a missing link. I also specified the base-commit for the series. - Frank asked for some changes to the documentation; however, David is taking care of that in a separate patch[2], so I did not make those changes here. There will be some additional changes necessary after David's patch is applied. Alan Maguire (1): kunit: test: create a single centralized executor for all tests Brendan Higgins (5): vmlinux.lds.h: add linker section for KUnit test suites arch: um: add linker section for KUnit test suites init: main: add KUnit to kernel init kunit: test: add test plan to KUnit TAP format Documentation: Add kunit_shutdown to kernel-parameters.txt David Gow (1): kunit: Add 'kunit_shutdown' option .../admin-guide/kernel-parameters.txt | 8 ++ arch/um/include/asm/common.lds.S | 4 + include/asm-generic/vmlinux.lds.h | 8 ++ include/kunit/test.h | 82 ++++++++++++------- init/main.c | 4 + lib/kunit/Makefile | 3 +- lib/kunit/executor.c | 71 ++++++++++++++++ lib/kunit/test.c | 11 --- tools/testing/kunit/kunit_kernel.py | 2 +- tools/testing/kunit/kunit_parser.py | 76 ++++++++++++++--- .../test_is_test_passed-all_passed.log | 1 + .../test_data/test_is_test_passed-crash.log | 1 + .../test_data/test_is_test_passed-failure.log | 1 + 13 files changed, 218 insertions(+), 54 deletions(-) create mode 100644 lib/kunit/executor.c base-commit: a2f0b878c3ca531a1706cb2a8b079cea3b17bafc [1] https://github.com/isaacs/testanything.github.io/blob/tap14/tap-version-14-… [2] https://patchwork.kernel.org/patch/11383635/ -- 2.25.1.481.gfbce0eb801-goog

4 years, 6 months

7
19
0 0

[PATCH v2] selftests/ftrace: Use printf instead of echo in kprobe syntax error tests

by Seth Forshee

Test cases which use echo to write strings containing backslashes fail with some shells, as echo's treatment of backslashes in strings varies between shell implementations. Use printf instead, as it should behave consistently across different shells. This requires adjustments to the strings to escape \ and % characters. ftrace_errlog_check() must also re-escape these characters after processing them to remove ^ characters. Signed-off-by: Seth Forshee <seth.forshee(a)canonical.com> --- Changes in v2: - Escape backslashes for a couple of additional tests .../testing/selftests/ftrace/test.d/functions | 6 +++--- .../test.d/kprobe/kprobe_syntax_errors.tc | 20 +++++++++---------- 2 files changed, 13 insertions(+), 13 deletions(-) diff --git a/tools/testing/selftests/ftrace/test.d/functions b/tools/testing/selftests/ftrace/test.d/functions index 5d4550591ff9..b38c6eb029e8 100644 --- a/tools/testing/selftests/ftrace/test.d/functions +++ b/tools/testing/selftests/ftrace/test.d/functions @@ -114,11 +114,11 @@ yield() { } ftrace_errlog_check() { # err-prefix command-with-error-pos-by-^ command-file - pos=$(echo -n "${2%^*}" | wc -c) # error position - command=$(echo "$2" | tr -d ^) + pos=$(printf "${2%^*}" | wc -c) # error position + command=$(printf "$2" | sed -e 's/\^//g' -e 's/%/%%/g' -e 's/\\/\\\\/g') echo "Test command: $command" echo > error_log - (! echo "$command" >> "$3" ) 2> /dev/null + (! printf "$command" >> "$3" ) 2> /dev/null grep "$1: error:" -A 3 error_log N=$(tail -n 1 error_log | wc -c) # " Command: " and "^\n" => 13 diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc index ef1e9bafb098..039c03d230b9 100644 --- a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc +++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc @@ -37,14 +37,14 @@ fi check_error 'p vfs_read ^$none_var' # BAD_VAR -check_error 'p vfs_read ^%none_reg' # BAD_REG_NAME +check_error 'p vfs_read ^%%none_reg' # BAD_REG_NAME check_error 'p vfs_read ^@12345678abcde' # BAD_MEM_ADDR check_error 'p vfs_read ^@+10' # FILE_ON_KPROBE grep -q "imm-value" README && \ -check_error 'p vfs_read arg1=\^x' # BAD_IMM +check_error 'p vfs_read arg1=\\^x' # BAD_IMM grep -q "imm-string" README && \ -check_error 'p vfs_read arg1=\"abcd^' # IMMSTR_NO_CLOSE +check_error 'p vfs_read arg1=\\"abcd^' # IMMSTR_NO_CLOSE check_error 'p vfs_read ^+0@0)' # DEREF_NEED_BRACE check_error 'p vfs_read ^+0ab1(@0)' # BAD_DEREF_OFFS @@ -80,7 +80,7 @@ check_error 'p vfs_read arg1=^' # NO_ARG_BODY # instruction boundary check is valid on x86 (at this moment) case $(uname -m) in x86_64|i[3456]86) - echo 'p vfs_read' > kprobe_events + printf 'p vfs_read' > kprobe_events if grep -q FTRACE ../kprobes/list ; then check_error 'p ^vfs_read+3' # BAD_INSN_BNDRY (only if function-tracer is enabled) fi @@ -89,13 +89,13 @@ esac # multiprobe errors if grep -q "Create/append/" README && grep -q "imm-value" README; then -echo 'p:kprobes/testevent _do_fork' > kprobe_events +printf 'p:kprobes/testevent _do_fork' > kprobe_events check_error '^r:kprobes/testevent do_exit' # DIFF_PROBE_TYPE -echo 'p:kprobes/testevent _do_fork abcd=\1' > kprobe_events -check_error 'p:kprobes/testevent _do_fork ^bcd=\1' # DIFF_ARG_TYPE -check_error 'p:kprobes/testevent _do_fork ^abcd=\1:u8' # DIFF_ARG_TYPE -check_error 'p:kprobes/testevent _do_fork ^abcd=\"foo"' # DIFF_ARG_TYPE -check_error '^p:kprobes/testevent _do_fork abcd=\1' # SAME_PROBE +printf 'p:kprobes/testevent _do_fork abcd=\\1' > kprobe_events +check_error 'p:kprobes/testevent _do_fork ^bcd=\\1' # DIFF_ARG_TYPE +check_error 'p:kprobes/testevent _do_fork ^abcd=\\1:u8' # DIFF_ARG_TYPE +check_error 'p:kprobes/testevent _do_fork ^abcd=\\"foo"'# DIFF_ARG_TYPE +check_error '^p:kprobes/testevent _do_fork abcd=\\1' # SAME_PROBE fi exit 0 -- 2.25.0

4 years, 6 months

2
3
0 0

[PATCH v3 kunit-next 0/2] kunit: extend kunit resources API

by Alan Maguire

A recent RFC patch set [1] suggests some additional functionality may be needed around kunit resources. It seems to require 1. support for resources without allocation 2. support for lookup of such resources 3. support for access to resources across multiple kernel threads The proposed changes here are designed to address these needs. The idea is we first generalize the API to support adding resources with static data; then from there we support named resources. The latter support is needed because if we are in a different thread context and only have the "struct kunit *" to work with, we need a way to identify a resource in lookup. [1] https://lkml.org/lkml/2020/2/26/1286 Changes since v2: - moved a few functions relating to resource retrieval in patches 1 and 2 into include/kunit/test.h and defined as "static inline"; this allows built-in consumers to use these functions when KUnit is built as a module Changes since v1: - reformatted longer parameter lists to have one parameter per-line (Brendan, patch 1) - fixed phrasing in various comments to clarify allocation of memory and added comment to kunit resource tests to clarify why kunit_put_resource() is used there (Brendan, patch 1) - changed #define to static inline function (Brendan, patch 2) - simplified kunit_add_named_resource() to use more of existing code for non-named resource (Brendan, patch 2) Alan Maguire (2): kunit: generalize kunit_resource API beyond allocated resources kunit: add support for named resources include/kunit/test.h | 211 +++++++++++++++++++++++++++++++++++++++------- lib/kunit/kunit-test.c | 111 +++++++++++++++++++----- lib/kunit/string-stream.c | 14 ++- lib/kunit/test.c | 172 ++++++++++++++++++++++--------------- 4 files changed, 382 insertions(+), 126 deletions(-) -- 1.8.3.1

4 years, 6 months

2
4
0 0

[PATCH 0/4] Kselftest integration into Kernel CI - Part 1

by Shuah Khan

This patch series consists of first round of fixes to integrate Kselftest into Kernel CI. You can find full list of problems in my announcement I sent out last week: https://lkml.org/lkml/2020/2/27/2221 These fixes to android and seccomp tests address relocatable support. However, they will still leave the source directory dirty. android test does headers_install in source directory. This is an easier problem to fix. seccomp on the other hand builds fixdep scripts under scripts/basic and installs headers in the source directory. It is linked to solving bpf relocatable build issue which I haven't given it a lot of thought for now. There is no dependency on source directory for run-time which is what we want. I will apply these kernelci topic branch for testing git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git Shuah Khan (4): selftests: Fix kselftest O=objdir build from cluttering top level objdir selftests: Fix seccomp to support relocatable build (O=objdir) selftests: android: ion: Fix ionmap_test compile error selftests: android: Fix custom install from skipping test progs tools/testing/selftests/Makefile | 4 ++-- tools/testing/selftests/android/Makefile | 2 +- tools/testing/selftests/android/ion/Makefile | 2 +- tools/testing/selftests/seccomp/Makefile | 16 +++------------- 4 files changed, 7 insertions(+), 17 deletions(-) -- 2.20.1

4 years, 7 months

5
13
0 0

[PATCH v2 0/2] ftrace/selftest: clean up failure cases

by Alan Maguire

When running the ftrace selftests, 2 failures and 6 unresolved cases were observed. The failures can be avoided by setting a sysctl prior to test execution (fixed in patch 1) and by having unresolved cases not return 0 from ftracetest by default since they indicate an absence of testing modules/programs rather than ftrace issues (patch 2). The latter are classified as "unresolved" tests, which operate differently from "unsupported" tests. For unsupported tests, we note the unsupported count but do not consider the tests as having failed, whereas with unresolved the test run is considered to have failed so returns "not ok" when run via kselftest ("make -C tools/testing/selftest/ftrace run_tests"). Patch 2 aligns the unresolved behaviour with the unsupported; by default, unresolved outcomes do not trigger overall failure, but they can if --fail-unresolved is specified. Changes since v1: - updated patch 1 to use /proc path instead of sysctl (Masami) - updated patch 2 to modify unresolved handling in ftracetest rather than change individual unresolved -> unsupported (Masami) Alan Maguire (2): ftrace/selftests: workaround cgroup RT scheduling issues ftrace/selftest: make unresolved cases cause failure if --fail-unresolved set tools/testing/selftests/ftrace/ftracetest | 30 +++++++++++++++++++++++++++++- 1 file changed, 29 insertions(+), 1 deletion(-) -- 1.8.3.1

4 years, 7 months

4
7
0 0

[RFC v3 0/3] Fix errors when try to build kvm selftests on specified output

by Xiaoyao Li

Hi Shuah, Hope you're happy with this version that I only touch KVM's Makefile. I attempted to build KVM selftests on a specified dir, unfortunately neither "make O=/path/to/mydir TARGETS=kvm" in tools/testing/selftests, nor "make OUTPUT=/path/to/mydir" in tools/testing/selftests/kvm work. This series aims to fix them. Patch 1 and Patch 3 are the fix patch, please see the seperate for details. While Patch 2 is more or less an fix for the future issue, since it works without Patch 2 currently. Changes in v3: - Drop all the patches that touch things out of KVM - Create OUTPUT dir in KVM's Makefile - Correct the INSTALL_HDR_PATH in KVM's Makefile Changes in v2: https://lore.kernel.org/kvm/20200325140133.103236-1-xiaoyao.li@intel.com/ - fix the no directory issue in lib.mk - make kvm fixes seperate patch - Add the patch to fix linux src tree not clean issue v1: https://lore.kernel.org/kvm/20200315093425.33600-1-xiaoyao.li@intel.com/ Xiaoyao Li (3): kvm: selftests: Fix no directory error when OUTPUT specified kvm: selftests: Use the right INSTALL_HDR_PATH when OUTPUT specified and MAKELEVEL is 0 kvm: selftests: Fix header path when built from parent level with O specified tools/testing/selftests/kvm/Makefile | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) -- 2.20.1

4 years, 7 months

2
8
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror March 2020