This series attempts to provide a simple way for BPF programs (and in
future other consumers) to utilize BPF Type Format (BTF) information
to display kernel data structures in-kernel. The use case this
functionality is applied to here is to support a bpf_trace_printk
trace event-based method of rendering type information.
There is already support in kernel/bpf/btf.c for "show" functionality;
the changes here generalize that support from seq-file specific
verifier display to the more generic case and add another specific
use case; rather than seq_printf()ing the show data, it is traced
using the bpf_trace_printk trace event. Other future uses of the
show functionality could include a bpf_printk_btf() function which
printk()ed the data instead. Oops messaging in particular would
be an interesting application for such functionality.
The above potential use case hints at a potential reply to
a reasonable objection that such typed display should be
solved by tracing programs, where the in-kernel tracing records
data and the userspace program prints it out. While this
is certainly the recommended approach for most cases, I
believe having an in-kernel mechanism would be valuable
also. Critically in BPF programs it greatly simplifies
debugging and tracing of such data to invoking a one-line
helper.
One challenge raised in an earlier iteration of this work -
where the BTF printing was implemented as a printk() format
specifier - was that the amount of data printed per
printk() was large, and other format specifiers were far
simpler. This patchset tackles this by instead displaying
data _as the data structure is traversed_, rathern than copying
it to a string for later display. The problem in doing this
however is that such output can be intermixed with other
bpf_trace_printk events. The solution pursued here is to
associate a trace ID with the bpf_trace_printk events. For
now, the bpf_trace_printk() helper sets this trace ID to 0,
and bpf_trace_btf() can specify non-zero values. This allows
a BPF program to coordinate with a user-space program which
creates a separate trace instance which filters trace events
based on trace ID, allowing for clean display without pollution
from other data sources. Future work could enhance
bpf_trace_printk() to do this too, either via a new helper
or by smuggling a 32-bit trace id value into the "fmt_size"
argument (the latter might be problematic for 32-bit platforms
though, so a new helper might be preferred).
To aid in display the bpf_trace_btf() helper is passed a
"struct btf_ptr *" which specifies the data to be traced
(struct sk_buff * say), the BTF id of the type (the BTF
id of "struct sk_buff") or a string representation of
the type ("struct sk_buff"). A flags field is also
present for future use.
Separately a number of flags control how the output is
rendered, see patch 3 for more details.
A snippet of output from printing "struct sk_buff *"
(see patch 3 for the full output) looks like this:
<idle>-0 [023] d.s. 1825.778400: bpf_trace_printk: (struct sk_buff){
<idle>-0 [023] d.s. 1825.778409: bpf_trace_printk: (union){
<idle>-0 [023] d.s. 1825.778410: bpf_trace_printk: (struct){
<idle>-0 [023] d.s. 1825.778412: bpf_trace_printk: .prev = (struct sk_buff *)0x00000000b2a3df7e,
<idle>-0 [023] d.s. 1825.778413: bpf_trace_printk: (union){
<idle>-0 [023] d.s. 1825.778414: bpf_trace_printk: .dev = (struct net_device *)0x000000001658808b,
<idle>-0 [023] d.s. 1825.778416: bpf_trace_printk: .dev_scratch = (long unsigned int)18446628460391432192,
<idle>-0 [023] d.s. 1825.778417: bpf_trace_printk: },
<idle>-0 [023] d.s. 1825.778417: bpf_trace_printk: },
<idle>-0 [023] d.s. 1825.778418: bpf_trace_printk: .rbnode = (struct rb_node){
<idle>-0 [023] d.s. 1825.778419: bpf_trace_printk: .rb_right = (struct rb_node *)0x00000000b2a3df7e,
<idle>-0 [023] d.s. 1825.778420: bpf_trace_printk: .rb_left = (struct rb_node *)0x000000001658808b,
<idle>-0 [023] d.s. 1825.778420: bpf_trace_printk: },
<idle>-0 [023] d.s. 1825.778421: bpf_trace_printk: .list = (struct list_head){
<idle>-0 [023] d.s. 1825.778422: bpf_trace_printk: .prev = (struct list_head *)0x00000000b2a3df7e,
<idle>-0 [023] d.s. 1825.778422: bpf_trace_printk: },
<idle>-0 [023] d.s. 1825.778422: bpf_trace_printk: },
<idle>-0 [023] d.s. 1825.778426: bpf_trace_printk: .len = (unsigned int)168,
<idle>-0 [023] d.s. 1825.778427: bpf_trace_printk: .mac_len = (__u16)14,
Changes since v3:
- Moved to RFC since the approach is different (and bpf-next is
closed)
- Rather than using a printk() format specifier as the means
of invoking BTF-enabled display, a dedicated BPF helper is
used. This solves the issue of printk() having to output
large amounts of data using a complex mechanism such as
BTF traversal, but still provides a way for the display of
such data to be achieved via BPF programs. Future work could
include a bpf_printk_btf() function to invoke display via
printk() where the elements of a data structure are printk()ed
one at a time. Thanks to Petr Mladek, Andy Shevchenko and
Rasmus Villemoes who took time to look at the earlier printk()
format-specifier-focused version of this and provided feedback
clarifying the problems with that approach.
- Added trace id to the bpf_trace_printk events as a means of
separating output from standard bpf_trace_printk() events,
ensuring it can be easily parsed by the reader.
- Added bpf_trace_btf() helper tests which do simple verification
of the various display options.
Changes since v2:
- Alexei and Yonghong suggested it would be good to use
probe_kernel_read() on to-be-shown data to ensure safety
during operation. Safe copy via probe_kernel_read() to a
buffer object in "struct btf_show" is used to support
this. A few different approaches were explored
including dynamic allocation and per-cpu buffers. The
downside of dynamic allocation is that it would be done
during BPF program execution for bpf_trace_printk()s using
%pT format specifiers. The problem with per-cpu buffers
is we'd have to manage preemption and since the display
of an object occurs over an extended period and in printk
context where we'd rather not change preemption status,
it seemed tricky to manage buffer safety while considering
preemption. The approach of utilizing stack buffer space
via the "struct btf_show" seemed like the simplest approach.
The stack size of the associated functions which have a
"struct btf_show" on their stack to support show operation
(btf_type_snprintf_show() and btf_type_seq_show()) stays
under 500 bytes. The compromise here is the safe buffer we
use is small - 256 bytes - and as a result multiple
probe_kernel_read()s are needed for larger objects. Most
objects of interest are smaller than this (e.g.
"struct sk_buff" is 224 bytes), and while task_struct is a
notable exception at ~8K, performance is not the priority for
BTF-based display. (Alexei and Yonghong, patch 2).
- safe buffer use is the default behaviour (and is mandatory
for BPF) but unsafe display - meaning no safe copy is done
and we operate on the object itself - is supported via a
'u' option.
- pointers are prefixed with 0x for clarity (Alexei, patch 2)
- added additional comments and explanations around BTF show
code, especially around determining whether objects such
zeroed. Also tried to comment safe object scheme used. (Yonghong,
patch 2)
- added late_initcall() to initialize vmlinux BTF so that it would
not have to be initialized during printk operation (Alexei,
patch 5)
- removed CONFIG_BTF_PRINTF config option as it is not needed;
CONFIG_DEBUG_INFO_BTF can be used to gate test behaviour and
determining behaviour of type-based printk can be done via
retrieval of BTF data; if it's not there BTF was unavailable
or broken (Alexei, patches 4,6)
- fix bpf_trace_printk test to use vmlinux.h and globals via
skeleton infrastructure, removing need for perf events
(Andrii, patch 8)
Changes since v1:
- changed format to be more drgn-like, rendering indented type info
along with type names by default (Alexei)
- zeroed values are omitted (Arnaldo) by default unless the '0'
modifier is specified (Alexei)
- added an option to print pointer values without obfuscation.
The reason to do this is the sysctls controlling pointer display
are likely to be irrelevant in many if not most tracing contexts.
Some questions on this in the outstanding questions section below...
- reworked printk format specifer so that we no longer rely on format
%pT<type> but instead use a struct * which contains type information
(Rasmus). This simplifies the printk parsing, makes use more dynamic
and also allows specification by BTF id as well as name.
- removed incorrect patch which tried to fix dereferencing of resolved
BTF info for vmlinux; instead we skip modifiers for the relevant
case (array element type determination) (Alexei).
- fixed issues with negative snprintf format length (Rasmus)
- added test cases for various data structure formats; base types,
typedefs, structs, etc.
- tests now iterate through all typedef, enum, struct and unions
defined for vmlinux BTF and render a version of the target dummy
value which is either all zeros or all 0xff values; the idea is this
exercises the "skip if zero" and "print everything" cases.
- added support in BPF for using the %pT format specifier in
bpf_trace_printk()
- added BPF tests which ensure %pT format specifier use works (Alexei).
Alan Maguire (4):
bpf: provide function to get vmlinux BTF information
bpf: make BTF show support generic, apply to seq
files/bpf_trace_printk
bpf: add bpf_trace_btf helper
selftests/bpf: add bpf_trace_btf helper tests
include/linux/bpf.h | 5 +
include/linux/btf.h | 38 +
include/uapi/linux/bpf.h | 63 ++
kernel/bpf/btf.c | 962 ++++++++++++++++++---
kernel/bpf/core.c | 5 +
kernel/bpf/helpers.c | 4 +
kernel/bpf/verifier.c | 18 +-
kernel/trace/bpf_trace.c | 121 ++-
kernel/trace/bpf_trace.h | 6 +-
scripts/bpf_helpers_doc.py | 2 +
tools/include/uapi/linux/bpf.h | 63 ++
tools/testing/selftests/bpf/prog_tests/trace_btf.c | 45 +
.../selftests/bpf/progs/netif_receive_skb.c | 43 +
13 files changed, 1257 insertions(+), 118 deletions(-)
create mode 100644 tools/testing/selftests/bpf/prog_tests/trace_btf.c
create mode 100644 tools/testing/selftests/bpf/progs/netif_receive_skb.c
--
1.8.3.1