October 2021 - Linux-kselftest-mirror

[PATCH v4 0/8] tracing: Extend histogram triggers expression parsing

by Kalesh Singh

Hi all, The v4 of the extending histogram exprssions series. The previous versions were posted at: v3: https://lore.kernel.org/r/20211025192330.2992076-1-kaleshsingh@google.com/ v2: https://lore.kernel.org/r/20211020013153.4106001-1-kaleshsingh@google.com/ v1: https://lore.kernel.org/r/20210915195306.612966-1-kaleshsingh@google.com/ Patches 4 through 6 are new and adds some optimizations/improvements suggested by Steven Rostedt. Removes the Change-Id tags that were inadvertently added in v3. The cover letter is copied below for convenience. Thanks, Kalesh --- The frequency of the rss_stat trace event is known to be of the same magnitude as that of the sched_switch event on Android devices. This can cause flooding of the trace buffer with rss_stat traces leading to a decreased trace buffer capacity and loss of data. If it is not necessary to monitor very small changes in rss (as is the case in Android) then the rss_stat tracepoint can be throttled to only emit the event once there is a large enough change in the rss size. The original patch that introduced the rss_stat tracepoint also proposed a fixed throttling mechanism that only emits the rss_stat event when the rss size crosses a 512KB boundary. It was concluded that more generic support for this type of filtering/throttling was need, so that it can be applied to any trace event. [1] >From the discussion in [1], histogram triggers seemed the most likely candidate to support this type of throttling. For instance to achieve the same throttling as was proposed in [1]: (1) Create a histogram variable to save the 512KB bucket of the rss size (2) Use the onchange handler to generate a synthetic event when the rss size bucket changes. The only missing pieces to support such a hist trigger are: (1) Support for setting a hist variable to a specific value -- to set the bucket size / granularity. (2) Support for division arithmetic operation -- to determine the corresponding bucket for an rss size. This series extends histogram trigger expressions to: (1) Allow assigning numeric literals to hist variable (eg. x=1234) and using literals directly in expressions (eg. x=size/1234) (2) Support division and multiplication in hist expressions. (eg. a=$x/$y*z); and (3) Fixes expression parsing for non-associative operators: subtraction and division. (eg. 8-4-2 should be 2 not 6) The rss_stat event can then be throttled using histogram triggers as below: # Create a synthetic event to monitor instead of the high frequency # rss_stat event echo 'rss_stat_throttled unsigned int mm_id; unsigned int curr; int member; long size' >> tracing/synthetic_events # Create a hist trigger that emits the synthetic rss_stat_throttled # event only when the rss size crosses a 512KB boundary. echo 'hist:keys=mm_id,member:bucket=size/0x80000:onchange($bucket) .rss_stat_throttled(mm_id,curr,member,size)' >> events/kmem/rss_stat/trigger ------ Test Results ------ Histograms can also be used to evaluate the effectiveness of this throttling by noting the Total Hits on each trigger: echo 'hist:keys=common_pid' >> events/sched/sched_switch/trigger echo 'hist:keys=common_pid' >> events/kmem/rss_stat/trigger echo 'hist:keys=common_pid' >> events/synthetic/rss_stat_throttled/trigger Allowing the above example (512KB granularity) run for 5 minutes on an arm64 device with 5.10 kernel: sched_switch : total hits = 147153 rss_stat : total hits = 38863 rss_stat_throttled: total hits = 2409 The synthetic rss_stat_throttled event is ~16x less frequent than the rss_stat event when using a 512KB granularity. The results are more pronounced when rss size is changing at a higher rate in small increments. For instance the following results were obtained by recording the hits on the above events for a run of Android's lmkd_unit_test [2], which continually forks processes that map anonymous memory until there is an oom kill: sched_switch : total hits = 148832 rss_stat : total hits = 4754802 rss_stat_throttled: total hits = 96214 In this stress test, the synthetic rss_stat_throttled event is ~50x less frequent than the rss_stat event when using a 512KB granularity. [1] https://lore.kernel.org/lkml/20190903200905.198642-1-joel@joelfernandes.org/ [2] https://cs.android.com/android/platform/superproject/+/master:system/memory… Kalesh Singh (8): tracing: Add support for creating hist trigger variables from literal tracing: Add division and multiplication support for hist triggers tracing: Fix operator precedence for hist triggers expression tracing/histogram: Simplify handling of .sym-offset in expressions tracing/histogram: Covert expr to const if both operands are constants tracing/histogram: Optimize division by a power of 2 tracing/selftests: Add tests for hist trigger expression parsing tracing/histogram: Document expression arithmetic and constants Documentation/trace/histogram.rst | 14 + kernel/trace/trace_events_hist.c | 400 ++++++++++++++---- .../testing/selftests/ftrace/test.d/functions | 4 +- .../trigger/trigger-hist-expressions.tc | 72 ++++ 4 files changed, 412 insertions(+), 78 deletions(-) create mode 100644 tools/testing/selftests/ftrace/test.d/trigger/trigger-hist-expressions.tc base-commit: ac8a6eba2a117e0fdc04da62ab568d1b7ca4c8f6 -- 2.33.0.1079.g6e70778dc9-goog

2 years, 6 months

3
28
0 0

Re: [PATCH v4 7/8] tracing/selftests: Add tests for hist trigger expression parsing

by Steven Rostedt

On Wed, 27 Oct 2021 08:55:39 -0700 Kalesh Singh <kaleshsingh(a)google.com> wrote: > Thanks for looking into this. I've attached the full logs here. Just looking at: 11-add_remove_kprobe.tc-log.vQWAmF I see the failure of: + echo + PLACE=_do_fork + >>dynamic_events + echo 'p:myevent1 _do_fork' Where "_do_fork" no longer exists and the tests have been updated. I'm guessing you are running outdated tests. Please make sure that the tests you run are the latest from the kernel tree. Thanks! -- Steve

2 years, 6 months

1
0
0 0

Re: [PATCH v4 7/8] tracing/selftests: Add tests for hist trigger expression parsing

by Steven Rostedt

On Tue, 26 Oct 2021 21:27:00 -0700 Kalesh Singh <kaleshsingh(a)google.com> wrote: > > Interesting. There should be test logs under logs/ directory in the > > ftracetest. Can you share the logs/*/ftracetest.log and your kernel kconfig? > > > > Thank you, > > > Hi Masami, > > I have attached the config and ftracetest.log here. Actually, could you attach the other files in that log? tar cvjf log.tar.bz2 logs/<date>/ Where <date> is the value for the log that failed. That will give me more information to why the tests failed. I'm currently going to test the config you sent. Thanks! -- Steve

2 years, 6 months

2
3
0 0

Dear Friend,

by Wahid Majrooh

Dear Friend, I am writing to you to make a proposal regarding Investing in your country. I am proposing to you a business development Investment in housing and health sector or any other sector you can recommend. My name is Wahid Majrooh. Former acting Minister of Public Health of Afghanistan. Sincerely Wahid

2 years, 6 months

1
0
0 0

[PATCH v4 00/33] arm64/sme: Initial support for the Scalable Matrix Extension

by Mark Brown

This series provides initial support for the ARMv9 Scalable Matrix Extension (SME). SME takes the approach used for vectors in SVE and extends this to provide architectural support for matrix operations. A more detailed overview can be found in [1]. For the kernel SME can be thought of as a series of features which are intended to be used together by applications but operate mostly orthogonally: - The ZA matrix register. - Streaming mode, in which ZA can be accessed and a subset of SVE features are available. - A second vector length, used for streaming mode SVE and ZA and controlled using a similar interface to that for SVE. - TPIDR2, a new userspace controllable system register intended for use by the C library for storing context related to the ZA ABI. A substantial part of the series is dedicated to refactoring the existing SVE support so that we don't need to duplicate code for handling vector lengths and the SVE registers, this involves creating an array of vector types and making the users take the vector type as a parameter. I'm not 100% happy with this but wasn't able to come up with anything better, duplicating code definitely felt like a bad idea so this felt like the least bad thing. If this approach makes sense to people it might make sense to split this off into a separate series and/or merge it while the rest is pending review to try to make things a little more digestable, the series is very large so it'd probably make things easier to digest if some of the preparatory refactoring could be merged before the rest is ready. One feature of the architecture of particular note is that switching to and from streaming mode may change the size of and invalidate the contents of the SVE registers, and when in streaming mode the FFR is not accessible. This complicates aspects of the ABI like signal handling and ptrace. This initial implementation is mainly intended to get the ABI in place, there are several areas which will be worked on going forwards - some of these will be blockers, others could be handled in followup serieses: - KVM is not currently supported and we depend on !KVM, this is obviously not good - in hopefully the next version I will add support for coexisting with KVM and then in a subsequent series implement support for use of SME by KVM guests. - It is likely some build configurations have issues, I've not fully checked this yet. In general testing is still ongoing, I anticipate finding and fixing some issues in the implementation. - No support is currently provided for scheduler control of SME or SME applications, given the size of the SME register state the context switch overhead may be noticable so this may be needed especially for real time applications. Similar concerns already exist for larger SVE vector lengths but are amplified for SME, particularly as the vector length increases. - There has been no work on optimising the performance of anything the kernel does. It is not expected that any systems will be encountered that support SME but not SVE, SME is an ARMv9 feature and SVE is mandatory for ARMv9. The code attempts to handle any such systems that are encountered but this hasn't been tested extensively. Due to dependencies on changes already upstreamed this series is based on a merge of for-next/kselftest and for-next/sve in the arm64 tree. v4: - Rebase onto merged patches. - Remove an uneeded NULL check in vec_proc_do_default_vl(). - Include patch to factor out utility routines in kselftests written in assembler. - Specify -ffreestanding when building TPIDR2 test. v3: - Skip FFR rather than predicate registers in sve_flush_live(). - Don't assume a bool is all zeros in sve_flush_live() as per AAPCS. - Don't redundantly specify a zero index when clearing FFR. v2: - Fix several issues with !SME and !SVE configurations. - Preserve TPIDR2 when creating a new thread/process unless CLONE_SETTLS is set. - Report traps due to using features in an invalid mode as SIGILL. - Spell out streaming mode behaviour in SVE ABI documentation more directly. - Document TPIDR2 in the ABI document. - Use SMSTART and SMSTOP rather than read/modify/write sequences. - Rework logic for exiting streaming mode on syscall. - Don't needlessly initialise SVCR on access trap. - Always restore SME VL for userspace if SME traps are disabled. - Only yield to encourage preemption every 128 iterations in za-test, otherwise do a getpid(), and validate SVCR after syscall. - Leave streaming mode disabled except when reading the vector length in za-test, and disable ZA after detecting a mismatch. - Add SME support to vlset. - Clarifications and typo fixes in comments. - Move sme_alloc() forward declaration back a patch. [1] https://community.arm.com/developer/ip-products/processors/b/processors-ip-… Mark Brown (33): arm64/sve: Make sysctl interface for SVE reusable by SME arm64/sve: Generalise vector length configuration prctl() for SME kselftest/arm64: Parameterise ptrace vector length information kselftest/arm64: Allow signal tests to trigger from a function tools/nolibc: Implement gettid() arm64/sme: Provide ABI documentation for SME arm64/sme: System register and exception syndrome definitions arm64/sme: Define macros for manually encoding SME instructions arm64/sme: Early CPU setup for SME arm64/sme: Basic enumeration support arm64/sme: Identify supported SME vector lengths at boot arm64/sme: Implement sysctl to set the default vector length arm64/sme: Implement vector length configuration prctl()s arm64/sme: Implement support for TPIDR2 arm64/sme: Implement SVCR context switching arm64/sme: Implement streaming SVE context switching arm64/sme: Implement ZA context switching arm64/sme: Implement traps and syscall handling for SME arm64/sme: Implement streaming SVE signal handling arm64/sme: Implement ZA signal handling arm64/sme: Implement ptrace support for streaming mode SVE registers arm64/sme: Add ptrace support for ZA arm64/sme: Disable streaming mode and ZA when flushing CPU state arm64/sme: Save and restore streaming mode over EFI runtime calls arm64/sme: Provide Kconfig for SME kselftest/arm64: sme: Add streaming SME support to vlset kselftest/arm64: Add tests for TPIDR2 kselftest/arm64: Extend vector configuration API tests to cover SME kselftest/arm64: sme: Provide streaming mode SVE stress test kselftest/arm64: Add stress test for SME ZA context switching kselftest/arm64: signal: Add SME signal handling tests kselftest/arm64: Add streaming SVE to SVE ptrace tests kselftest/arm64: Add coverage for the ZA ptrace interface Documentation/arm64/elf_hwcaps.rst | 29 + Documentation/arm64/index.rst | 1 + Documentation/arm64/sme.rst | 428 ++++++++++++ Documentation/arm64/sve.rst | 69 +- arch/arm64/Kconfig | 11 + arch/arm64/include/asm/cpu.h | 4 + arch/arm64/include/asm/cpufeature.h | 18 + arch/arm64/include/asm/el2_setup.h | 36 + arch/arm64/include/asm/esr.h | 13 +- arch/arm64/include/asm/exception.h | 1 + arch/arm64/include/asm/fpsimd.h | 111 ++- arch/arm64/include/asm/fpsimdmacros.h | 77 +++ arch/arm64/include/asm/hwcap.h | 7 + arch/arm64/include/asm/kvm_arm.h | 1 + arch/arm64/include/asm/processor.h | 18 +- arch/arm64/include/asm/sysreg.h | 53 ++ arch/arm64/include/asm/thread_info.h | 2 + arch/arm64/include/uapi/asm/hwcap.h | 7 + arch/arm64/include/uapi/asm/ptrace.h | 69 +- arch/arm64/include/uapi/asm/sigcontext.h | 55 +- arch/arm64/kernel/cpufeature.c | 90 +++ arch/arm64/kernel/cpuinfo.c | 12 + arch/arm64/kernel/entry-common.c | 10 + arch/arm64/kernel/entry-fpsimd.S | 31 + arch/arm64/kernel/fpsimd.c | 640 ++++++++++++++++-- arch/arm64/kernel/process.c | 28 +- arch/arm64/kernel/ptrace.c | 358 ++++++++-- arch/arm64/kernel/signal.c | 187 ++++- arch/arm64/kernel/syscall.c | 43 +- arch/arm64/kernel/traps.c | 1 + arch/arm64/kvm/fpsimd.c | 3 +- arch/arm64/kvm/reset.c | 8 +- arch/arm64/tools/cpucaps | 1 + include/uapi/linux/elf.h | 2 + include/uapi/linux/prctl.h | 9 + kernel/sys.c | 12 + tools/include/nolibc/nolibc.h | 18 + tools/testing/selftests/arm64/Makefile | 2 +- tools/testing/selftests/arm64/abi/.gitignore | 1 + tools/testing/selftests/arm64/abi/Makefile | 13 + tools/testing/selftests/arm64/abi/tpidr2.c | 298 ++++++++ tools/testing/selftests/arm64/fp/.gitignore | 4 + tools/testing/selftests/arm64/fp/Makefile | 12 +- tools/testing/selftests/arm64/fp/rdvl-sme.c | 14 + tools/testing/selftests/arm64/fp/rdvl.S | 16 + tools/testing/selftests/arm64/fp/rdvl.h | 1 + tools/testing/selftests/arm64/fp/ssve-stress | 59 ++ tools/testing/selftests/arm64/fp/sve-ptrace.c | 230 ++++--- tools/testing/selftests/arm64/fp/sve-test.S | 30 + tools/testing/selftests/arm64/fp/vec-syscfg.c | 10 + tools/testing/selftests/arm64/fp/vlset.c | 10 +- tools/testing/selftests/arm64/fp/za-ptrace.c | 353 ++++++++++ tools/testing/selftests/arm64/fp/za-stress | 59 ++ tools/testing/selftests/arm64/fp/za-test.S | 431 ++++++++++++ .../testing/selftests/arm64/signal/.gitignore | 2 + .../selftests/arm64/signal/test_signals.h | 2 + .../arm64/signal/test_signals_utils.c | 5 +- .../testcases/fake_sigreturn_sme_change_vl.c | 92 +++ .../arm64/signal/testcases/sme_trap_za.c | 36 + .../selftests/arm64/signal/testcases/sme_vl.c | 70 ++ .../arm64/signal/testcases/ssve_regs.c | 129 ++++ 61 files changed, 4090 insertions(+), 252 deletions(-) create mode 100644 Documentation/arm64/sme.rst create mode 100644 tools/testing/selftests/arm64/abi/.gitignore create mode 100644 tools/testing/selftests/arm64/abi/Makefile create mode 100644 tools/testing/selftests/arm64/abi/tpidr2.c create mode 100644 tools/testing/selftests/arm64/fp/rdvl-sme.c create mode 100644 tools/testing/selftests/arm64/fp/ssve-stress create mode 100644 tools/testing/selftests/arm64/fp/za-ptrace.c create mode 100644 tools/testing/selftests/arm64/fp/za-stress create mode 100644 tools/testing/selftests/arm64/fp/za-test.S create mode 100644 tools/testing/selftests/arm64/signal/testcases/fake_sigreturn_sme_change_vl.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/sme_trap_za.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/sme_vl.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/ssve_regs.c base-commit: ac972c1eafce10fe893df7698f56f25121426f5d -- 2.30.2

2 years, 6 months

2
34
0 0

[REGRESSION] lkft kselftest for next-20211026

by lkft＠linaro.org

## Build * kernel: 5.15.0-rc7 * git: https://gitlab.com/Linaro/lkft/mirrors/next/linux-next * git branch: master * git commit: 2376e5fe91bcad74b997d2cc0535abff79ec73c5 * git describe: next-20211026 * test details: https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20211026 ## Regressions (compared to next-20211022) * hi6220-hikey, kselftest-timers - timers.rtcpie * i386, kselftest-rtc - rtc.rtctest * x15, kselftest-rtc - rtc.rtctest.rtc.alarm_alm_set - rtc.rtctest.rtc.alarm_alm_set_minute - rtc.rtctest.rtc.alarm_wkalm_set - rtc.rtctest.rtc.date_read Reported-by: Linux Kernel Functional Testing <lkft(a)linaro.org> ## Fixes (compared to next-20211022) * qemu_i386, kselftest-rtc - rtc.rtctest * qemu_x86_64, kselftest-rtc - rtc.rtctest ## Test result summary total: 2936, pass: 1722, fail: 259, skip: 955, xfail: 0 ## Build Summary ## Test suites summary * kselftest-android * kselftest-arm64 * kselftest-arm64/arm64.btitest.bti_c_func * kselftest-arm64/arm64.btitest.bti_j_func * kselftest-arm64/arm64.btitest.bti_jc_func * kselftest-arm64/arm64.btitest.bti_none_func * kselftest-arm64/arm64.btitest.nohint_func * kselftest-arm64/arm64.btitest.paciasp_func * kselftest-arm64/arm64.nobtitest.bti_c_func * kselftest-arm64/arm64.nobtitest.bti_j_func * kselftest-arm64/arm64.nobtitest.bti_jc_func * kselftest-arm64/arm64.nobtitest.bti_none_func * kselftest-arm64/arm64.nobtitest.nohint_func * kselftest-arm64/arm64.nobtitest.paciasp_func * kselftest-bpf * kselftest-breakpoints * kselftest-capabilities * kselftest-cgroup * kselftest-clone3 * kselftest-core * kselftest-cpu-hotplug * kselftest-cpufreq * kselftest-drivers * kselftest-efivarfs * kselftest-filesystems * kselftest-firmware * kselftest-fpu * kselftest-futex * kselftest-gpio * kselftest-intel_pstate * kselftest-ipc * kselftest-ir * kselftest-kcmp * kselftest-kexec * kselftest-kvm * kselftest-lib * kselftest-livepatch * kselftest-lkdtm * kselftest-membarrier * kselftest-net * kselftest-netfilter * kselftest-nsfs * kselftest-openat2 * kselftest-pid_namespace * kselftest-pidfd * kselftest-proc * kselftest-pstore * kselftest-ptrace * kselftest-rseq * kselftest-rtc * kselftest-seccomp * kselftest-sigaltstack * kselftest-size * kselftest-splice * kselftest-static_keys * kselftest-sync * kselftest-sysctl * kselftest-tc-testing * kselftest-timens * kselftest-timers * kselftest-tmpfs * kselftest-tpm2 * kselftest-user * kselftest-vm * kselftest-vm[ * kselftest-x86 * kselftest-zram -- Linaro LKFT https://lkft.linaro.org

2 years, 6 months

1
0
0 0

[REGRESSION] lkft kselftest for next-20211025

by lkft＠linaro.org

## Build * kernel: 5.15.0-rc6 * git: ['https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git', 'https://gitlab.com/Linaro/lkft/mirrors/next/linux-next'] * git branch: master * git commit: 9ae1fbdeabd3b3f668ad0bcb47d64b3a9fb4f8fc * git describe: next-20211025 * test details: https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20211025 ## Regressions (compared to next-20211022) * i386, kselftest-rtc - rtc.rtctest * qemu_arm, kselftest-cgroup - cgroup.test_freezer - cgroup.test_freezer.test_cgfreezer_migrate * x15, kselftest-rtc - rtc.rtctest.rtc.alarm_alm_set - rtc.rtctest.rtc.alarm_alm_set_minute - rtc.rtctest.rtc.alarm_wkalm_set - rtc.rtctest.rtc.date_read Reported-by: Linux Kernel Functional Testing <lkft(a)linaro.org> ## Fixes (compared to next-20211022) * qemu_i386, kselftest-rtc - rtc.rtctest ## Test result summary total: 2855, pass: 1699, fail: 247, skip: 909, xfail: 0 ## Build Summary ## Test suites summary * kselftest-android * kselftest-arm64 * kselftest-arm64/arm64.btitest.bti_c_func * kselftest-arm64/arm64.btitest.bti_j_func * kselftest-arm64/arm64.btitest.bti_jc_func * kselftest-arm64/arm64.btitest.bti_none_func * kselftest-arm64/arm64.btitest.nohint_func * kselftest-arm64/arm64.btitest.paciasp_func * kselftest-arm64/arm64.nobtitest.bti_c_func * kselftest-arm64/arm64.nobtitest.bti_j_func * kselftest-arm64/arm64.nobtitest.bti_jc_func * kselftest-arm64/arm64.nobtitest.bti_none_func * kselftest-arm64/arm64.nobtitest.nohint_func * kselftest-arm64/arm64.nobtitest.paciasp_func * kselftest-bpf * kselftest-breakpoints * kselftest-capabilities * kselftest-cgroup * kselftest-clone3 * kselftest-core * kselftest-cpu-hotplug * kselftest-cpufreq * kselftest-drivers * kselftest-efivarfs * kselftest-filesystems * kselftest-firmware * kselftest-fpu * kselftest-futex * kselftest-gpio * kselftest-intel_pstate * kselftest-ipc * kselftest-ir * kselftest-kcmp * kselftest-kexec * kselftest-kvm * kselftest-lib * kselftest-livepatch * kselftest-lkdtm * kselftest-membarrier * kselftest-net * kselftest-netfilter * kselftest-nsfs * kselftest-openat2 * kselftest-pid_namespace * kselftest-pidfd * kselftest-proc * kselftest-pstore * kselftest-ptrace * kselftest-rseq * kselftest-rtc * kselftest-seccomp * kselftest-sigaltstack * kselftest-size * kselftest-splice * kselftest-static_keys * kselftest-sync * kselftest-sysctl * kselftest-tc-testing * kselftest-timens * kselftest-timers * kselftest-tmpfs * kselftest-tpm2 * kselftest-user * kselftest-vm * kselftest-x86 * kselftest-zram -- Linaro LKFT https://lkft.linaro.org

2 years, 6 months

1
0
0 0

[PATCH v2] selftests/ftrace: Stop tracing while reading the trace file by default

by Masami Hiramatsu

Stop tracing while reading the trace file by default, to prevent the test results while checking it and to avoid taking a long time to check the result. If there is any testcase which wants to test the tracing while reading the trace file, please override this setting inside the test case. This also recovers the pause-on-trace when clean it up. Signed-off-by: Masami Hiramatsu <mhiramat(a)kernel.org> --- Changes in v2: - Recover pause-on-trace to 0 when exit. --- tools/testing/selftests/ftrace/ftracetest | 2 +- tools/testing/selftests/ftrace/test.d/functions | 12 ++++++++++++ 2 files changed, 13 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/ftrace/ftracetest b/tools/testing/selftests/ftrace/ftracetest index 8ec1922e974e..c3311c8c4089 100755 --- a/tools/testing/selftests/ftrace/ftracetest +++ b/tools/testing/selftests/ftrace/ftracetest @@ -428,7 +428,7 @@ for t in $TEST_CASES; do exit 1 fi done -(cd $TRACING_DIR; initialize_ftrace) # for cleanup +(cd $TRACING_DIR; finish_ftrace) # for cleanup prlog "" prlog "# of passed: " `echo $PASSED_CASES | wc -w` diff --git a/tools/testing/selftests/ftrace/test.d/functions b/tools/testing/selftests/ftrace/test.d/functions index 000fd05e84b1..5f6cbec847fc 100644 --- a/tools/testing/selftests/ftrace/test.d/functions +++ b/tools/testing/selftests/ftrace/test.d/functions @@ -124,10 +124,22 @@ initialize_ftrace() { # Reset ftrace to initial-state [ -f uprobe_events ] && echo > uprobe_events [ -f synthetic_events ] && echo > synthetic_events [ -f snapshot ] && echo 0 > snapshot + +# Stop tracing while reading the trace file by default, to prevent +# the test results while checking it and to avoid taking a long time +# to check the result. + [ -f options/pause-on-trace ] && echo 1 > options/pause-on-trace + clear_trace enable_tracing } +finish_ftrace() { + initialize_ftrace +# And recover it to default. + [ -f options/pause-on-trace ] && echo 0 > options/pause-on-trace +} + check_requires() { # Check required files and tracers for i in "$@" ; do r=${i%:README}

2 years, 6 months

1
0
0 0

[PATCH] kselftests: ftrace: limit the executing time by reading from cached trace

by Li Zhijian

LKP/0day observed that kselftests/ftrace cannot finish within 1 hour on a 96 cpus platform where it hangs in the line like: 'cat trace | grep -v ^# | awk '{ print $5 }' | sort -u | wc -l' subsystem-enable.tc It seems that trace will keep growing during it's read by 'cat' command. Consequently, trace becomes too large to finish reading. replace 'cat trace' by: $ sed -i 's/cat trace |/read_cached_trace |/g' $(find test.d -name "*.tc") CC: Philip Li <philip.li(a)intel.com> Reported-by: kernel test robot <lkp(a)intel.com> Signed-off-by: Li Zhijian <lizhijian(a)cn.fujitsu.com> --- .../testing/selftests/ftrace/test.d/event/event-enable.tc | 6 +++--- .../testing/selftests/ftrace/test.d/event/event-no-pid.tc | 4 ++-- tools/testing/selftests/ftrace/test.d/event/event-pid.tc | 6 +++--- .../selftests/ftrace/test.d/event/subsystem-enable.tc | 6 +++--- .../selftests/ftrace/test.d/event/toplevel-enable.tc | 2 +- .../selftests/ftrace/test.d/ftrace/fgraph-filter-stack.tc | 8 ++++---- .../selftests/ftrace/test.d/ftrace/fgraph-filter.tc | 4 ++-- .../ftrace/test.d/ftrace/func-filter-notrace-pid.tc | 8 ++++---- .../selftests/ftrace/test.d/ftrace/func-filter-pid.tc | 8 ++++---- tools/testing/selftests/ftrace/test.d/functions | 6 ++++++ .../selftests/ftrace/test.d/kprobe/kretprobe_args.tc | 2 +- 11 files changed, 33 insertions(+), 27 deletions(-) diff --git a/tools/testing/selftests/ftrace/test.d/event/event-enable.tc b/tools/testing/selftests/ftrace/test.d/event/event-enable.tc index cfe5bd2d4267..97d64ac407c9 100644 --- a/tools/testing/selftests/ftrace/test.d/event/event-enable.tc +++ b/tools/testing/selftests/ftrace/test.d/event/event-enable.tc @@ -18,7 +18,7 @@ echo 'sched:sched_switch' > set_event yield -count=`cat trace | grep sched_switch | wc -l` +count=`read_cached_trace | grep sched_switch | wc -l` if [ $count -eq 0 ]; then fail "sched_switch events are not recorded" fi @@ -29,7 +29,7 @@ echo 1 > events/sched/sched_switch/enable yield -count=`cat trace | grep sched_switch | wc -l` +count=`read_cached_trace | grep sched_switch | wc -l` if [ $count -eq 0 ]; then fail "sched_switch events are not recorded" fi @@ -40,7 +40,7 @@ echo 0 > events/sched/sched_switch/enable yield -count=`cat trace | grep sched_switch | wc -l` +count=`read_cached_trace | grep sched_switch | wc -l` if [ $count -ne 0 ]; then fail "sched_switch events should not be recorded" fi diff --git a/tools/testing/selftests/ftrace/test.d/event/event-no-pid.tc b/tools/testing/selftests/ftrace/test.d/event/event-no-pid.tc index 9933ed24f901..678f283044cb 100644 --- a/tools/testing/selftests/ftrace/test.d/event/event-no-pid.tc +++ b/tools/testing/selftests/ftrace/test.d/event/event-no-pid.tc @@ -23,12 +23,12 @@ fail() { #msg count_pid() { pid=$@ - cat trace | grep -v '^#' | sed -e 's/[^-]*-$[0-9]*$.*/\1/' | grep $pid | wc -l + read_cached_trace | grep -v '^#' | sed -e 's/[^-]*-$[0-9]*$.*/\1/' | grep $pid | wc -l } count_no_pid() { pid=$1 - cat trace | grep -v '^#' | sed -e 's/[^-]*-$[0-9]*$.*/\1/' | grep -v $pid | wc -l + read_cached_trace | grep -v '^#' | sed -e 's/[^-]*-$[0-9]*$.*/\1/' | grep -v $pid | wc -l } enable_system() { diff --git a/tools/testing/selftests/ftrace/test.d/event/event-pid.tc b/tools/testing/selftests/ftrace/test.d/event/event-pid.tc index 7f5f97dffdc3..da7a5aa8f061 100644 --- a/tools/testing/selftests/ftrace/test.d/event/event-pid.tc +++ b/tools/testing/selftests/ftrace/test.d/event/event-pid.tc @@ -23,7 +23,7 @@ echo 1 > events/sched/sched_switch/enable yield -count=`cat trace | grep sched_switch | wc -l` +count=`read_cached_trace | grep sched_switch | wc -l` if [ $count -eq 0 ]; then fail "sched_switch events are not recorded" fi @@ -38,7 +38,7 @@ echo 'sched:sched_switch' > set_event yield -count=`cat trace | grep sched_switch | grep -v "pid=$mypid" | wc -l` +count=`read_cached_trace | grep sched_switch | grep -v "pid=$mypid" | wc -l` if [ $count -ne 0 ]; then fail "sched_switch events from other task are recorded" fi @@ -51,7 +51,7 @@ echo 1 > events/sched/sched_switch/enable yield -count=`cat trace | grep sched_switch | grep -v "pid=$mypid" | wc -l` +count=`read_cached_trace | grep sched_switch | grep -v "pid=$mypid" | wc -l` if [ $count -eq 0 ]; then fail "sched_switch events from other task are not recorded" fi diff --git a/tools/testing/selftests/ftrace/test.d/event/subsystem-enable.tc b/tools/testing/selftests/ftrace/test.d/event/subsystem-enable.tc index b1ede6249866..e21e923d8aa2 100644 --- a/tools/testing/selftests/ftrace/test.d/event/subsystem-enable.tc +++ b/tools/testing/selftests/ftrace/test.d/event/subsystem-enable.tc @@ -18,7 +18,7 @@ echo 'sched:*' > set_event yield -count=`cat trace | grep -v ^# | awk '{ print $5 }' | sort -u | wc -l` +count=`read_cached_trace | grep -v ^# | awk '{ print $5 }' | sort -u | wc -l` if [ $count -lt 3 ]; then fail "at least fork, exec and exit events should be recorded" fi @@ -29,7 +29,7 @@ echo 1 > events/sched/enable yield -count=`cat trace | grep -v ^# | awk '{ print $5 }' | sort -u | wc -l` +count=`read_cached_trace | grep -v ^# | awk '{ print $5 }' | sort -u | wc -l` if [ $count -lt 3 ]; then fail "at least fork, exec and exit events should be recorded" fi @@ -40,7 +40,7 @@ echo 0 > events/sched/enable yield -count=`cat trace | grep -v ^# | awk '{ print $5 }' | sort -u | wc -l` +count=`read_cached_trace | grep -v ^# | awk '{ print $5 }' | sort -u | wc -l` if [ $count -ne 0 ]; then fail "any of scheduler events should not be recorded" fi diff --git a/tools/testing/selftests/ftrace/test.d/event/toplevel-enable.tc b/tools/testing/selftests/ftrace/test.d/event/toplevel-enable.tc index 93c10ea42a68..b24792987438 100644 --- a/tools/testing/selftests/ftrace/test.d/event/toplevel-enable.tc +++ b/tools/testing/selftests/ftrace/test.d/event/toplevel-enable.tc @@ -43,7 +43,7 @@ echo 0 > events/enable yield -count=`cat trace | grep -v ^# | wc -l` +count=`read_cached_trace | grep -v ^# | wc -l` if [ $count -ne 0 ]; then fail "any of events should not be recorded" fi diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter-stack.tc b/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter-stack.tc index cf3ea42b12b0..157080f682bf 100644 --- a/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter-stack.tc +++ b/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter-stack.tc @@ -40,14 +40,14 @@ clear_trace enable_tracing sleep 1 -count=`cat trace | grep '()' | grep -v schedule | wc -l` +count=`read_cached_trace | grep '()' | grep -v schedule | wc -l` if [ $count -ne 0 ]; then fail "Graph filtering not working with stack tracer?" fi # Make sure we did find something -count=`cat trace | grep 'schedule()' | wc -l` +count=`read_cached_trace | grep 'schedule()' | wc -l` if [ $count -eq 0 ]; then fail "No schedule traces found?" fi @@ -57,13 +57,13 @@ clear_trace sleep 1 -count=`cat trace | grep '()' | grep -v schedule | wc -l` +count=`read_cached_trace | grep '()' | grep -v schedule | wc -l` if [ $count -ne 0 ]; then fail "Graph filtering not working after stack tracer disabled?" fi -count=`cat trace | grep 'schedule()' | wc -l` +count=`read_cached_trace | grep 'schedule()' | wc -l` if [ $count -eq 0 ]; then fail "No schedule traces found?" fi diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter.tc b/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter.tc index b3ccdaec2a61..930dfc06f4ba 100644 --- a/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter.tc +++ b/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter.tc @@ -26,13 +26,13 @@ enable_tracing sleep 1 # search for functions (has "()" on the line), and make sure # that only the schedule function was found -count=`cat trace | grep '()' | grep -v schedule | wc -l` +count=`read_cached_trace | grep '()' | grep -v schedule | wc -l` if [ $count -ne 0 ]; then fail "Graph filtering not working by itself?" fi # Make sure we did find something -count=`cat trace | grep 'schedule()' | wc -l` +count=`read_cached_trace | grep 'schedule()' | wc -l` if [ $count -eq 0 ]; then fail "No schedule traces found?" fi diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-notrace-pid.tc b/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-notrace-pid.tc index 80541964b927..1f08b7207d74 100644 --- a/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-notrace-pid.tc +++ b/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-notrace-pid.tc @@ -52,8 +52,8 @@ do_test() { enable_tracing yield - count_pid=`cat trace | grep -v ^# | grep $PID | wc -l` - count_other=`cat trace | grep -v ^# | grep -v $PID | wc -l` + count_pid=`read_cached_trace | grep -v ^# | grep $PID | wc -l` + count_other=`read_cached_trace | grep -v ^# | grep -v $PID | wc -l` # count_pid should be 0 if [ $count_pid -ne 0 -o $count_other -eq 0 ]; then @@ -78,8 +78,8 @@ do_test() { enable_tracing yield - count_pid=`cat trace | grep -v ^# | grep $PID | wc -l` - count_other=`cat trace | grep -v ^# | grep -v $PID | wc -l` + count_pid=`read_cached_trace | grep -v ^# | grep $PID | wc -l` + count_other=`read_cached_trace | grep -v ^# | grep -v $PID | wc -l` # both should be zero if [ $count_pid -ne 0 -o $count_other -ne 0 ]; then diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-pid.tc b/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-pid.tc index 2f7211254529..30c218b849dc 100644 --- a/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-pid.tc +++ b/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-pid.tc @@ -52,8 +52,8 @@ do_test() { enable_tracing yield - count_pid=`cat trace | grep -v ^# | grep $PID | wc -l` - count_other=`cat trace | grep -v ^# | grep -v $PID | wc -l` + count_pid=`read_cached_trace | grep -v ^# | grep $PID | wc -l` + count_other=`read_cached_trace | grep -v ^# | grep -v $PID | wc -l` # count_other should be 0 if [ $count_pid -eq 0 -o $count_other -ne 0 ]; then @@ -73,8 +73,8 @@ do_test() { enable_tracing yield - count_pid=`cat trace | grep -v ^# | grep $PID | wc -l` - count_other=`cat trace | grep -v ^# | grep -v $PID | wc -l` + count_pid=`read_cached_trace | grep -v ^# | grep $PID | wc -l` + count_other=`read_cached_trace | grep -v ^# | grep -v $PID | wc -l` # count_other should NOT be 0 if [ $count_pid -eq 0 -o $count_other -eq 0 ]; then diff --git a/tools/testing/selftests/ftrace/test.d/functions b/tools/testing/selftests/ftrace/test.d/functions index 000fd05e84b1..35d1d173d44b 100644 --- a/tools/testing/selftests/ftrace/test.d/functions +++ b/tools/testing/selftests/ftrace/test.d/functions @@ -175,3 +175,9 @@ ftrace_errlog_check() { # err-prefix command-with-error-pos-by-^ command-file # " Command: " and "^\n" => 13 test $(expr 13 + $pos) -eq $N } + +read_cached_trace() { + cp trace /tmp/cached_trace + cat /tmp/cached_trace + rm -f /tmp/cached_trace +} diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kretprobe_args.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kretprobe_args.tc index 197cc2afd404..57b3b215122f 100644 --- a/tools/testing/selftests/ftrace/test.d/kprobe/kretprobe_args.tc +++ b/tools/testing/selftests/ftrace/test.d/kprobe/kretprobe_args.tc @@ -11,7 +11,7 @@ test -d events/kprobes/testprobe2 echo 1 > events/kprobes/testprobe2/enable ( echo "forked") -cat trace | grep testprobe2 | grep -q "<- $FUNCTION_FORK" +read_cached_trace | grep testprobe2 | grep -q "<- $FUNCTION_FORK" echo 0 > events/kprobes/testprobe2/enable echo '-:testprobe2' >> kprobe_events -- 2.31.1

2 years, 6 months

4
13
0 0

Re: [PATCH v4 06/33] arm64/sme: Provide ABI documentation for SME

by Mark Brown

On Tue, Oct 26, 2021 at 01:38:51AM +0000, Luis Machado wrote: > A few nits below... Thanks. Hopefully I spotted everything and rolled it in, there's no flagging of what bits are quoted and you've not deleted any of the extra context so I might've missed some comment - if so sorry about that.

2 years, 6 months

1
0
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror October 2021