Unless the user sets overcommit_memory or has plenty of swap, the latest
changes to the testcase will result in ENOMEM failures for hosts with
less than 64GB RAM. As we do not use much of the allocated memory, we
can use MAP_NORESERVE to avoid this error.
Cc: Zenghui Yu <yuzenghui(a)huawei.com>
Cc: vkuznets(a)redhat.com
Cc: wanghaibin.wang(a)huawei.com
Cc: stable(a)vger.kernel.org
Fixes: 309505dd5685 ("KVM: selftests: Fix mapping length truncation in m{,un}map()")
Signed-off-by: Christian Borntraeger <borntraeger(a)de.ibm.com>
---
tools/testing/selftests/kvm/set_memory_region_test.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/tools/testing/selftests/kvm/set_memory_region_test.c b/tools/testing/selftests/kvm/set_memory_region_test.c
index d8812f27648c..d31f54ac4e98 100644
--- a/tools/testing/selftests/kvm/set_memory_region_test.c
+++ b/tools/testing/selftests/kvm/set_memory_region_test.c
@@ -377,7 +377,8 @@ static void test_add_max_memory_regions(void)
(max_mem_slots - 1), MEM_REGION_SIZE >> 10);
mem = mmap(NULL, (size_t)max_mem_slots * MEM_REGION_SIZE + alignment,
- PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
+ PROT_READ | PROT_WRITE,
+ MAP_PRIVATE | MAP_ANONYMOUS | MAP_NORESERVE, -1, 0);
TEST_ASSERT(mem != MAP_FAILED, "Failed to mmap() host");
mem_aligned = (void *)(((size_t) mem + alignment - 1) & ~(alignment - 1));
--
2.31.1
This patch addresses misleading error messages reported by kunit_tool in
two cases. First, in the case of TAP output having an incorrect header
format or missing a header, the parser used to output an error message of
'no tests run!'. Now the parser outputs an error message of 'could not
parse test results!'.
As an example:
Before:
$ ./tools/testing/kunit/kunit.py parse /dev/null
[ERROR] no tests run!
...
After:
$ ./tools/testing/kunit/kunit.py parse /dev/null
[ERROR] could not parse test results!
...
Second, in the case of TAP output with the correct header but no
tests, the parser used to output an error message of 'could not parse
test results!'. Now the parser outputs an error message of 'no tests
run!'.
As an example:
Before:
$ echo -e 'TAP version 14\n1..0' | ./tools/testing/kunit/kunit.py parse
[ERROR] could not parse test results!
After:
$ echo -e 'TAP version 14\n1..0' | ./tools/testing/kunit/kunit.py parse
[ERROR] no tests run!
Additionally, this patch also corrects the tests in kunit_tool_test.py
and adds a test to check the error in the case of TAP output with the
correct header but no tests.
Signed-off-by: Rae Moar <rmoar(a)google.com>
Reviewed-by: David Gow <davidgow(a)google.com>
Reviewed-by: Daniel Latypov <dlatypov(a)google.com>
---
V1 -> V2:
* Simplified log for the test for TAP output with the correct header
but no tests
* Added examples in commit message of error messages before and after
---
tools/testing/kunit/kunit_parser.py | 6 ++++--
tools/testing/kunit/kunit_tool_test.py | 16 +++++++++++++---
...st_is_test_passed-no_tests_run_no_header.log} | 0
...t_is_test_passed-no_tests_run_with_header.log | 2 ++
4 files changed, 19 insertions(+), 5 deletions(-)
rename tools/testing/kunit/test_data/{test_is_test_passed-no_tests_run.log => test_is_test_passed-no_tests_run_no_header.log} (100%)
create mode 100644 tools/testing/kunit/test_data/test_is_test_passed-no_tests_run_with_header.log
diff --git a/tools/testing/kunit/kunit_parser.py b/tools/testing/kunit/kunit_parser.py
index c3c524b79db8..b88db3f51dc5 100644
--- a/tools/testing/kunit/kunit_parser.py
+++ b/tools/testing/kunit/kunit_parser.py
@@ -338,9 +338,11 @@ def bubble_up_suite_errors(test_suites: Iterable[TestSuite]) -> TestStatus:
def parse_test_result(lines: LineStream) -> TestResult:
consume_non_diagnostic(lines)
if not lines or not parse_tap_header(lines):
- return TestResult(TestStatus.NO_TESTS, [], lines)
+ return TestResult(TestStatus.FAILURE_TO_PARSE_TESTS, [], lines)
expected_test_suite_num = parse_test_plan(lines)
- if not expected_test_suite_num:
+ if expected_test_suite_num == 0:
+ return TestResult(TestStatus.NO_TESTS, [], lines)
+ elif expected_test_suite_num is None:
return TestResult(TestStatus.FAILURE_TO_PARSE_TESTS, [], lines)
test_suites = []
for i in range(1, expected_test_suite_num + 1):
diff --git a/tools/testing/kunit/kunit_tool_test.py b/tools/testing/kunit/kunit_tool_test.py
index bdae0e5f6197..75045aa0f8a1 100755
--- a/tools/testing/kunit/kunit_tool_test.py
+++ b/tools/testing/kunit/kunit_tool_test.py
@@ -157,8 +157,18 @@ class KUnitParserTest(unittest.TestCase):
kunit_parser.TestStatus.FAILURE,
result.status)
+ def test_no_header(self):
+ empty_log = test_data_path('test_is_test_passed-no_tests_run_no_header.log')
+ with open(empty_log) as file:
+ result = kunit_parser.parse_run_tests(
+ kunit_parser.extract_tap_lines(file.readlines()))
+ self.assertEqual(0, len(result.suites))
+ self.assertEqual(
+ kunit_parser.TestStatus.FAILURE_TO_PARSE_TESTS,
+ result.status)
+
def test_no_tests(self):
- empty_log = test_data_path('test_is_test_passed-no_tests_run.log')
+ empty_log = test_data_path('test_is_test_passed-no_tests_run_with_header.log')
with open(empty_log) as file:
result = kunit_parser.parse_run_tests(
kunit_parser.extract_tap_lines(file.readlines()))
@@ -173,7 +183,7 @@ class KUnitParserTest(unittest.TestCase):
with open(crash_log) as file:
result = kunit_parser.parse_run_tests(
kunit_parser.extract_tap_lines(file.readlines()))
- print_mock.assert_any_call(StrContains('no tests run!'))
+ print_mock.assert_any_call(StrContains('could not parse test results!'))
print_mock.stop()
file.close()
@@ -309,7 +319,7 @@ class KUnitJsonTest(unittest.TestCase):
result["sub_groups"][1]["test_cases"][0])
def test_no_tests_json(self):
- result = self._json_for('test_is_test_passed-no_tests_run.log')
+ result = self._json_for('test_is_test_passed-no_tests_run_with_header.log')
self.assertEqual(0, len(result['sub_groups']))
class StrContains(str):
diff --git a/tools/testing/kunit/test_data/test_is_test_passed-no_tests_run.log b/tools/testing/kunit/test_data/test_is_test_passed-no_tests_run_no_header.log
similarity index 100%
rename from tools/testing/kunit/test_data/test_is_test_passed-no_tests_run.log
rename to tools/testing/kunit/test_data/test_is_test_passed-no_tests_run_no_header.log
diff --git a/tools/testing/kunit/test_data/test_is_test_passed-no_tests_run_with_header.log b/tools/testing/kunit/test_data/test_is_test_passed-no_tests_run_with_header.log
new file mode 100644
index 000000000000..5f48ee659d40
--- /dev/null
+++ b/tools/testing/kunit/test_data/test_is_test_passed-no_tests_run_with_header.log
@@ -0,0 +1,2 @@
+TAP version 14
+1..0
--
2.32.0.93.g670b81a890-goog
Hi,
This is v8 of syscall user dispatch. Last version got some acks but
there was one small documentation fix I wanted to do, as requested by
Florian. This also addresses the commit message fixup Peter requested.
The only actual code change from v7 is solving a trivial merge conflict
I myself created with the entry code fixup I made week and with
something else in the TIP tree.
I also shared this with glibc and there wasn't any complaints other than
the matter about user-notif vs. siginfo, which was discussed in v7 and
the understanding is that it is not necessary now and can be added
later, if needed, on the same infrastructure without a new api.
I'm not sure about TIP the rules, but is it too late to be queued for
the next merge window? I'd love to have this in 5.11 if possible, since
it has been flying for quite a while.
This is based on tip/master.
As usual, a working tree with this patchset is available at:
https://gitlab.collabora.com/krisman/linux -b syscall-user-dispatch-v8
Previous submissions are archived at:
RFC/v1: https://lkml.org/lkml/2020/7/8/96
v2: https://lkml.org/lkml/2020/7/9/17
v3: https://lkml.org/lkml/2020/7/12/4
v4: https://www.spinics.net/lists/linux-kselftest/msg16377.html
v5: https://lkml.org/lkml/2020/8/10/1320
v6: https://lkml.org/lkml/2020/9/4/1122
v7: https://lwn.net/Articles/837598/
Gabriel Krisman Bertazi (7):
x86: vdso: Expose sigreturn address on vdso to the kernel
signal: Expose SYS_USER_DISPATCH si_code type
kernel: Implement selective syscall userspace redirection
entry: Support Syscall User Dispatch on common syscall entry
selftests: Add kselftest for syscall user dispatch
selftests: Add benchmark for syscall user dispatch
docs: Document Syscall User Dispatch
.../admin-guide/syscall-user-dispatch.rst | 87 +++++
arch/x86/entry/vdso/vdso2c.c | 2 +
arch/x86/entry/vdso/vdso32/sigreturn.S | 2 +
arch/x86/entry/vdso/vma.c | 15 +
arch/x86/include/asm/elf.h | 2 +
arch/x86/include/asm/vdso.h | 2 +
arch/x86/kernel/signal_compat.c | 2 +-
fs/exec.c | 3 +
include/linux/entry-common.h | 2 +
include/linux/sched.h | 2 +
include/linux/syscall_user_dispatch.h | 40 +++
include/linux/thread_info.h | 2 +
include/uapi/asm-generic/siginfo.h | 3 +-
include/uapi/linux/prctl.h | 5 +
kernel/entry/Makefile | 2 +-
kernel/entry/common.c | 17 +
kernel/entry/common.h | 16 +
kernel/entry/syscall_user_dispatch.c | 102 ++++++
kernel/fork.c | 1 +
kernel/sys.c | 5 +
tools/testing/selftests/Makefile | 1 +
.../syscall_user_dispatch/.gitignore | 3 +
.../selftests/syscall_user_dispatch/Makefile | 9 +
.../selftests/syscall_user_dispatch/config | 1 +
.../syscall_user_dispatch/sud_benchmark.c | 200 +++++++++++
.../syscall_user_dispatch/sud_test.c | 310 ++++++++++++++++++
26 files changed, 833 insertions(+), 3 deletions(-)
create mode 100644 Documentation/admin-guide/syscall-user-dispatch.rst
create mode 100644 include/linux/syscall_user_dispatch.h
create mode 100644 kernel/entry/common.h
create mode 100644 kernel/entry/syscall_user_dispatch.c
create mode 100644 tools/testing/selftests/syscall_user_dispatch/.gitignore
create mode 100644 tools/testing/selftests/syscall_user_dispatch/Makefile
create mode 100644 tools/testing/selftests/syscall_user_dispatch/config
create mode 100644 tools/testing/selftests/syscall_user_dispatch/sud_benchmark.c
create mode 100644 tools/testing/selftests/syscall_user_dispatch/sud_test.c
--
2.29.2
This patch addresses misleading error messages reported by kunit_tool in
two cases. First, in the case of TAP output having an incorrect header
format or missing a header, the parser used to output an error message of
'no tests run!'. Now the parser outputs an error message of 'could not
parse test results!'.
As an example:
Before:
$ ./tools/testing/kunit/kunit.py parse /dev/null
[ERROR] no tests run!
...
After:
$ ./tools/testing/kunit/kunit.py parse /dev/null
[ERROR] could not parse test results!
...
Second, in the case of TAP output with the correct header but no
tests, the parser used to output an error message of 'could not parse
test results!'. Now the parser outputs an error message of 'no tests
run!'.
As an example:
Before:
$ echo -e 'TAP version 14\n1..0' | ./tools/testing/kunit/kunit.py parse
[ERROR] could not parse test results!
After:
$ echo -e 'TAP version 14\n1..0' | ./tools/testing/kunit/kunit.py parse
[ERROR] no tests run!
Additionally, this patch also corrects the tests in kunit_tool_test.py
and adds a test to check the error in the case of TAP output with the
correct header but no tests (the log for this test was simplified from
the first version of this patch).
Signed-off-by: Rae Moar <rmoar(a)google.com>
---
tools/testing/kunit/kunit_parser.py | 6 ++++--
tools/testing/kunit/kunit_tool_test.py | 16 +++++++++++++---
...st_is_test_passed-no_tests_run_no_header.log} | 0
...t_is_test_passed-no_tests_run_with_header.log | 2 ++
4 files changed, 19 insertions(+), 5 deletions(-)
rename tools/testing/kunit/test_data/{test_is_test_passed-no_tests_run.log => test_is_test_passed-no_tests_run_no_header.log} (100%)
create mode 100644 tools/testing/kunit/test_data/test_is_test_passed-no_tests_run_with_header.log
diff --git a/tools/testing/kunit/kunit_parser.py b/tools/testing/kunit/kunit_parser.py
index c3c524b79db8..b88db3f51dc5 100644
--- a/tools/testing/kunit/kunit_parser.py
+++ b/tools/testing/kunit/kunit_parser.py
@@ -338,9 +338,11 @@ def bubble_up_suite_errors(test_suites: Iterable[TestSuite]) -> TestStatus:
def parse_test_result(lines: LineStream) -> TestResult:
consume_non_diagnostic(lines)
if not lines or not parse_tap_header(lines):
- return TestResult(TestStatus.NO_TESTS, [], lines)
+ return TestResult(TestStatus.FAILURE_TO_PARSE_TESTS, [], lines)
expected_test_suite_num = parse_test_plan(lines)
- if not expected_test_suite_num:
+ if expected_test_suite_num == 0:
+ return TestResult(TestStatus.NO_TESTS, [], lines)
+ elif expected_test_suite_num is None:
return TestResult(TestStatus.FAILURE_TO_PARSE_TESTS, [], lines)
test_suites = []
for i in range(1, expected_test_suite_num + 1):
diff --git a/tools/testing/kunit/kunit_tool_test.py b/tools/testing/kunit/kunit_tool_test.py
index bdae0e5f6197..75045aa0f8a1 100755
--- a/tools/testing/kunit/kunit_tool_test.py
+++ b/tools/testing/kunit/kunit_tool_test.py
@@ -157,8 +157,18 @@ class KUnitParserTest(unittest.TestCase):
kunit_parser.TestStatus.FAILURE,
result.status)
+ def test_no_header(self):
+ empty_log = test_data_path('test_is_test_passed-no_tests_run_no_header.log')
+ with open(empty_log) as file:
+ result = kunit_parser.parse_run_tests(
+ kunit_parser.extract_tap_lines(file.readlines()))
+ self.assertEqual(0, len(result.suites))
+ self.assertEqual(
+ kunit_parser.TestStatus.FAILURE_TO_PARSE_TESTS,
+ result.status)
+
def test_no_tests(self):
- empty_log = test_data_path('test_is_test_passed-no_tests_run.log')
+ empty_log = test_data_path('test_is_test_passed-no_tests_run_with_header.log')
with open(empty_log) as file:
result = kunit_parser.parse_run_tests(
kunit_parser.extract_tap_lines(file.readlines()))
@@ -173,7 +183,7 @@ class KUnitParserTest(unittest.TestCase):
with open(crash_log) as file:
result = kunit_parser.parse_run_tests(
kunit_parser.extract_tap_lines(file.readlines()))
- print_mock.assert_any_call(StrContains('no tests run!'))
+ print_mock.assert_any_call(StrContains('could not parse test results!'))
print_mock.stop()
file.close()
@@ -309,7 +319,7 @@ class KUnitJsonTest(unittest.TestCase):
result["sub_groups"][1]["test_cases"][0])
def test_no_tests_json(self):
- result = self._json_for('test_is_test_passed-no_tests_run.log')
+ result = self._json_for('test_is_test_passed-no_tests_run_with_header.log')
self.assertEqual(0, len(result['sub_groups']))
class StrContains(str):
diff --git a/tools/testing/kunit/test_data/test_is_test_passed-no_tests_run.log b/tools/testing/kunit/test_data/test_is_test_passed-no_tests_run_no_header.log
similarity index 100%
rename from tools/testing/kunit/test_data/test_is_test_passed-no_tests_run.log
rename to tools/testing/kunit/test_data/test_is_test_passed-no_tests_run_no_header.log
diff --git a/tools/testing/kunit/test_data/test_is_test_passed-no_tests_run_with_header.log b/tools/testing/kunit/test_data/test_is_test_passed-no_tests_run_with_header.log
new file mode 100644
index 000000000000..5f48ee659d40
--- /dev/null
+++ b/tools/testing/kunit/test_data/test_is_test_passed-no_tests_run_with_header.log
@@ -0,0 +1,2 @@
+TAP version 14
+1..0
--
2.32.0.93.g670b81a890-goog