Dzień dobry!
Czy mógłbym przedstawić rozwiązanie, które umożliwia monitoring każdego auta w czasie rzeczywistym w tym jego pozycję, zużycie paliwa i przebieg?
Dodatkowo nasze narzędzie minimalizuje koszty utrzymania samochodów, skraca czas przejazdów, a także tworzenie planu tras czy dostaw.
Z naszej wiedzy i doświadczenia korzysta już ponad 49 tys. Klientów. Monitorujemy 809 000 pojazdów na całym świecie, co jest naszą najlepszą wizytówką.
Bardzo proszę o e-maila zwrotnego, jeśli moglibyśmy wspólnie omówić potencjał wykorzystania takiego rozwiązania w Państwa firmie.
Z poważaniem,
Mateusz Talaga
Dzień dobry,
dostrzegam możliwość współpracy z Państwa firmą.
Świadczymy kompleksową obsługę inwestycji w fotowoltaikę, która obniża koszty energii elektrycznej nawet o 90%.
Czy są Państwo zainteresowani weryfikacją wstępnych propozycji?
Pozdrawiam,
Maciej Nitycz
Hello,
I am so sorry contacting you in this means especially when we have never
met before. I urgently seek your service to represent me in investing in
your region / country and you will be rewarded for your service without
affecting your present job with very little time invested in it.
My interest is in buying real estate, private schools or companies with
potentials for rapid growth in long terms.
So please confirm interest by responding back.
My dearest regards
Seyba Daniel
Greetings!
I'm Nasser Rashid, a business financial specialist and investment
expert. consultant experienced in financial funding services. I
have a
I have a serious business investment opportunity to discuss with
you. Century Financial Dubai is the home of discerning investors.
We
We offer independent financial advice and assist our clients in
making sound investment decisions from a variety of investment
options.
Opportunities are available.
Our company is structured to provide personalized services to As
a result, capital security and adequate funding are ensured.
returns on investment. Our investors are ready to provide funding
for your business expansion, such as debt and equity.
financing. If you require funding, we would be able to partner
with you. We look forward to your response.
Thank you and stay safe,
Nasser Rashid, CFA,
Century Financial
This is similar to TCP-MD5 in functionality but it's sufficiently
different that packet formats and interfaces are incompatible.
Compared to TCP-MD5 more algorithms are supported and multiple keys
can be used on the same connection but there is still no negotiation
mechanism.
Expected use-case is protecting long-duration BGP/LDP connections
between routers using pre-shared keys. The goal of this series is to
allow routers using the Linux TCP stack to interoperate with vendors
such as Cisco and Juniper.
Both algorithms described in RFC5926 are implemented but the code is not
very easily extensible beyond that. In particular there are several code
paths making stack allocations based on RFC5926 maximum, those would
have to be increased. Support for arbitrary algorithms was requested
in reply to previous posts but I believe there is no real use case for
that.
The current implementation is somewhat loose regarding configuration:
* Overlaping MKTs can be configured despite what RFC5925 says
* Current key can be deleted. RFC says this shouldn't be allowed but
enforcing this belongs at an admin shell rather than in the kernel.
* If multiple keys are valid for a destination the kernel picks one
in an unpredictable manner (this can be overridden).
These conditions could be tightened but it is not clear the kernel
should spend effort to prevent misconfiguration from userspace.
The current code is largely feature complete and well-tested but I am
somewhat stuck on next steps for getting this into upstream. Any
suggestions would be very welcome
Here are some known flaws and limitations:
* Unsigned packets are sent if AO is active but no keys are found.
* Crypto API is used with buffers on the stack and inside struct sock,
this might not work on all arches. I'm currently only testing x64 VMs
* Interaction with TCP-MD5 not tested in all corners.
* Interaction with FASTOPEN not tested and unlikely to work because
sequence number assumptions for syn/ack.
* No way to limit keys on a per-port basis (used to be implicit with
per-socket keys).
* Not clear if crypto_ahash_setkey might sleep. If some implementation
do that then maybe they could be excluded through alloc flags.
* Traffic key is not cached (reducing performance)
* No caching or hashing for key lookups so this will scale poorly with
many keys
There is relatively little code sharing with the TCP_MD5SIG feature and
earlier versions shared even less. Unlike MD5 the AO feature is kept
separate from the rest of the TCP code and reusing code would require
many unrelated cleanup changes.
I'm not convinced that "authopt" is particularly good naming convention,
this name is a personal invention that does not appear anywhere else.
The RFC calls this "tcp-ao". Perhaps TCP_AOSIG would be a better name
and it would also make the close connection to TCP_MD5SIG more visible?
Some testing support is included in nettest and fcnal-test.sh, similar
to the current level of tcp-md5 testing.
A more elaborate test suite using pytest and scapy is available out of
tree: https://github.com/cdleonard/tcp-authopt-test That test suite is
much larger that the kernel code and did not receive many comments in
previous ports so I will attempt to push it separately (if at all).
Changes for frr (old): https://github.com/FRRouting/frr/pull/9442
That PR was made early for ABI feedback, it has many issues.
Changes for yabgp (old): https://github.com/cdleonard/yabgp/commits/tcp_authopt
This can be used for easy interoperability testing with cisco/juniper/etc.
Would need updates for global keys to avoid leaks
Changes since PATCH v4:
* Move the traffic_key context_bytes header to stack. If it's a constant
string then ahash can fail unexpectedly.
* Fix allowing unsigned traffic if all keys are marked norecv.
* Fix crashing in __tcp_authopt_alg_init on failure.
* Try to respect the rnextkeyid from SYN on SYNACK (new patch)
* Fix incorrect check for TCP_AUTHOPT_KEY_DEL in __tcp_authopt_select_key
* Improve docs on __tcp_authopt_select_key
* Fix build with CONFIG_PROC_FS=n (kernel build robot)
* Fix build with CONFIG_IPV6=n (kernel build robot)
Link: https://lore.kernel.org/netdev/cover.1640273966.git.cdleonard@gmail.com/
Changes since PATCH v3:
* Made keys global (per-netns rather than per-sock).
* Add /proc/net/tcp_authopt with a table of keys (not sockets).
* Fix part of the shash/ahash conversion having slipped from patch 3 to patch 5
* Fix tcp_parse_sig_options assigning NULL incorrectly when both MD5 and AO
are disabled (kernel build robot)
* Fix sparse endianness warnings in prefix match (kernel build robot)
* Fix several incorrect RCU annotations reported by sparse (kernel build robot)
Link: https://lore.kernel.org/netdev/cover.1638962992.git.cdleonard@gmail.com/
Changes since PATCH v2:
* Protect tcp_authopt_alg_get/put_tfm with local_bh_disable instead of
preempt_disable. This caused signature corruption when send path executing
with BH enabled was interrupted by recv.
* Fix accepted keyids not configured locally as "unexpected". If any key
is configured that matches the peer then traffic MUST be signed.
* Fix issues related to sne rollover during handshake itself. (Francesco)
* Implement and test prefixlen (David)
* Replace shash with ahash and reuse some of the MD5 code (Dmitry)
* Parse md5+ao options only once in the same function (Dmitry)
* Pass tcp_authopt_info into inbound check path, this avoids second rcu
dereference for same packet.
* Pass tcp_request_socket into inbound check path instead of just listen
socket. This is required for SNE rollover during handshake and clearifies
ISN handling.
* Do not allow disabling via sysctl after enabling once, this is difficult
to support well (David)
* Verbose check for sysctl_tcp_authopt (Dmitry)
* Use netif_index_is_l3_master (David)
* Cleanup ipvx_addr_match (David)
* Add a #define tcp_authopt_needed to wrap static key usage because it looks
nicer.
* Replace rcu_read_lock with rcu_dereference_protected in SNE updates (Eric)
* Remove test suite
Link: https://lore.kernel.org/netdev/cover.1635784253.git.cdleonard@gmail.com/
Changes since PATCH v1:
* Implement Sequence Number Extension
* Implement l3index for vrf: TCP_AUTHOPT_KEY_IFINDEX as equivalent of
TCP_MD5SIG_FLAG_IFINDEX
* Expand TCP-AO tests in fcnal-test.sh to near-parity with md5.
* Show addr/port on failure similar to md5
* Remove tox dependency from test suite (create venv directly)
* Switch default pytest output format to TAP (kselftest standard)
* Fix _copy_from_sockptr_tolerant stack corruption on short sockopts.
This was covered in test but error was invisible without STACKPROTECTOR=y
* Fix sysctl_tcp_authopt check in tcp_get_authopt_val before memset. This
was harmless because error code is checked in getsockopt anyway.
* Fix dropping md5 packets on all sockets with AO enabled
* Fix checking (key->recv_id & TCP_AUTHOPT_KEY_ADDR_BIND) instead of
key->flags in tcp_authopt_key_match_exact
* Fix PATCH 1/19 not compiling due to missing "int err" declaration
* Add ratelimited message for AO and MD5 both present
* Export all symbols required by CONFIG_IPV6=m (again)
* Fix compilation with CONFIG_TCP_AUTHOPT=y CONFIG_TCP_MD5SIG=n
* Fix checkpatch issues
* Pass -rrequirements.txt to tox to avoid dependency variation.
Link: https://lore.kernel.org/netdev/cover.1632240523.git.cdleonard@gmail.com/
Changes since RFCv3:
* Implement TCP_AUTHOPT handling for timewait and reset replies. Write
tests to execute these paths by injecting packets with scapy
* Handle combining md5 and authopt: if both are configured use authopt.
* Fix locking issues around send_key, introduced in on of the later patches.
* Handle IPv4-mapped-IPv6 addresses: it used to be that an ipv4 SYN sent
to an ipv6 socket with TCP-AO triggered WARN
* Implement un-namespaced sysctl disabled this feature by default
* Allocate new key before removing any old one in setsockopt (Dmitry)
* Remove tcp_authopt_key_info.local_id because it's no longer used (Dmitry)
* Propagate errors from TCP_AUTHOPT getsockopt (Dmitry)
* Fix no-longer-correct TCP_AUTHOPT_KEY_DEL docs (Dmitry)
* Simplify crypto allocation (Eric)
* Use kzmalloc instead of __GFP_ZERO (Eric)
* Add static_key_false tcp_authopt_needed (Eric)
* Clear authopt_info copied from oldsk in __tcp_authopt_openreq (Eric)
* Replace memcmp in ipv4 and ipv6 addr comparisons (Eric)
* Export symbols for CONFIG_IPV6=m (kernel test robot)
* Mark more functions static (kernel test robot)
* Fix build with CONFIG_PROVE_RCU_LIST=y (kernel test robot)
Link: https://lore.kernel.org/netdev/cover.1629840814.git.cdleonard@gmail.com/
Changes since RFCv2:
* Removed local_id from ABI and match on send_id/recv_id/addr
* Add all relevant out-of-tree tests to tools/testing/selftests
* Return an error instead of ignoring unknown flags, hopefully this makes
it easier to extend.
* Check sk_family before __tcp_authopt_info_get_or_create in tcp_set_authopt_key
* Use sock_owned_by_me instead of WARN_ON(!lockdep_sock_is_held(sk))
* Fix some intermediate build failures reported by kbuild robot
* Improve documentation
Link: https://lore.kernel.org/netdev/cover.1628544649.git.cdleonard@gmail.com/
Changes since RFC:
* Split into per-topic commits for ease of review. The intermediate
commits compile with a few "unused function" warnings and don't do
anything useful by themselves.
* Add ABI documention including kernel-doc on uapi
* Fix lockdep warnings from crypto by creating pools with one shash for
each cpu
* Accept short options to setsockopt by padding with zeros; this
approach allows increasing the size of the structs in the future.
* Support for aes-128-cmac-96
* Support for binding addresses to keys in a way similar to old tcp_md5
* Add support for retrieving received keyid/rnextkeyid and controling
the keyid/rnextkeyid being sent.
Link: https://lore.kernel.org/netdev/01383a8751e97ef826ef2adf93bfde3a08195a43.162…
Leonard Crestez (20):
tcp: authopt: Initial support and key management
docs: Add user documentation for tcp_authopt
tcp: authopt: Add crypto initialization
tcp: md5: Refactor tcp_sig_hash_skb_data for AO
tcp: authopt: Compute packet signatures
tcp: authopt: Hook into tcp core
tcp: authopt: Disable via sysctl by default
tcp: authopt: Implement Sequence Number Extension
tcp: ipv6: Add AO signing for tcp_v6_send_response
tcp: authopt: Add support for signing skb-less replies
tcp: ipv4: Add AO signing for skb-less replies
tcp: authopt: Add key selection controls
tcp: authopt: Add initial l3index support
tcp: authopt: Add NOSEND/NORECV flags
tcp: authopt: Add prefixlen support
tcp: authopt: Add /proc/net/tcp_authopt listing all keys
selftests: nettest: Rename md5_prefix to key_addr_prefix
selftests: nettest: Initial tcp_authopt support
selftests: net/fcnal: Initial tcp_authopt support
tcp: authopt: Try to respect rnextkeyid from SYN on SYNACK
Documentation/networking/index.rst | 1 +
Documentation/networking/ip-sysctl.rst | 6 +
Documentation/networking/tcp_authopt.rst | 88 +
include/linux/tcp.h | 15 +
include/net/net_namespace.h | 4 +
include/net/netns/tcp_authopt.h | 12 +
include/net/tcp.h | 27 +-
include/net/tcp_authopt.h | 323 ++++
include/uapi/linux/snmp.h | 1 +
include/uapi/linux/tcp.h | 137 ++
net/ipv4/Kconfig | 14 +
net/ipv4/Makefile | 1 +
net/ipv4/proc.c | 1 +
net/ipv4/sysctl_net_ipv4.c | 39 +
net/ipv4/tcp.c | 68 +-
net/ipv4/tcp_authopt.c | 1847 +++++++++++++++++++++
net/ipv4/tcp_input.c | 53 +-
net/ipv4/tcp_ipv4.c | 138 +-
net/ipv4/tcp_minisocks.c | 12 +
net/ipv4/tcp_output.c | 86 +-
net/ipv6/tcp_ipv6.c | 110 +-
tools/testing/selftests/net/fcnal-test.sh | 329 +++-
tools/testing/selftests/net/nettest.c | 204 ++-
23 files changed, 3430 insertions(+), 86 deletions(-)
create mode 100644 Documentation/networking/tcp_authopt.rst
create mode 100644 include/net/netns/tcp_authopt.h
create mode 100644 include/net/tcp_authopt.h
create mode 100644 net/ipv4/tcp_authopt.c
base-commit: fe8152b38d3a994c4c6fdbc0cd6551d569a5715a
--
2.25.1
Hello,
The aim of this series is to make resctrl_tests run by using
kselftest framework.
- I modify Makefile of resctrl_test and Makefile of selftest, to
build/run resctrl_tests by using kselftest framework.
- I set the limited time for resctrl_tests to 120 seconds, to ensure the
resctrl_tests finish in limited time.
- When resctrl file system is not supported or resctrl_tests is not run
as root, return skip code of kselftest.
- If it is not finish in limited time, terminate resctrl_tests same as
executing ctrl+c.
Difference from v1:
- I change the order of patches according to Reinette's review.
- "LDLIBS + = -lnuma" has no dependencies on this patch series, delete
it from [PATCH v2 2/5].
- I separate the license info of Makefile into a new patch [PATCH v2
3/5].
- I separate "limited time" into a new patch [PATCH v2 4/5].
(There is no change in [PATCH v2 1/5] and [PATCH v2 5/5])
In addition, I think 120s is not a problem since some tests have longer
timeout (e.g. net test is 300s), please let me know if this is wrong
Thanks,
Shaopeng Tan (5):
selftests/resctrl: Kill the child process created by fork() when the
SIGTERM signal comes
selftests/resctrl: Make resctrl_tests run using kselftest framework
selftests/resctrl: Add license to resctrl_test Makefile
selftests/resctrl: Change default limited time to 120 seconds for
resctrl_tests
selftests/resctrl: Return KSFT_SKIP(4) if resctrlfile system is not
supported or resctrl is not run as root
tools/testing/selftests/Makefile | 1 +
tools/testing/selftests/resctrl/Makefile | 20 +++++++------------
.../testing/selftests/resctrl/resctrl_tests.c | 4 ++--
tools/testing/selftests/resctrl/resctrl_val.c | 1 +
tools/testing/selftests/resctrl/settings | 1 +
5 files changed, 12 insertions(+), 15 deletions(-)
create mode 100644 tools/testing/selftests/resctrl/settings
--
2.27.0
The IOAM queue-depth data field was added a few weeks ago, but the test unit
was not updated accordingly. Here is the fix, thanks for the report.
Reported-by: kernel test robot <oliver.sang(a)intel.com>
Signed-off-by: Justin Iurman <justin.iurman(a)uliege.be>
---
tools/testing/selftests/net/ioam6_parser.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/tools/testing/selftests/net/ioam6_parser.c b/tools/testing/selftests/net/ioam6_parser.c
index 8f6997d35816..d9d1d4190126 100644
--- a/tools/testing/selftests/net/ioam6_parser.c
+++ b/tools/testing/selftests/net/ioam6_parser.c
@@ -240,11 +240,8 @@ static int check_ioam6_data(__u8 **p, struct ioam6_trace_hdr *ioam6h,
*p += sizeof(__u32);
}
- if (ioam6h->type.bit6) {
- if (__be32_to_cpu(*((__u32 *)*p)) != 0xffffffff)
- return 1;
+ if (ioam6h->type.bit6)
*p += sizeof(__u32);
- }
if (ioam6h->type.bit7) {
if (__be32_to_cpu(*((__u32 *)*p)) != 0xffffffff)
--
2.25.1