December 2022 - Linux-kselftest-mirror

[PATCH v2] selftests/kselftest/runner/run_one(): Allow running non-executable files

by SeongJae Park

From: SeongJae Park <sjpark(a)amazon.de> When running a test program, 'run_one()' checks if the program has the execution permission and fails if it doesn't. However, it's easy to mistakenly missing the permission, as some common tools like 'diff' don't support the permission change well[1]. Compared to that, making mistakes in the test program's path would only rare, as those are explicitly listed in 'TEST_PROGS'. Therefore, it might make more sense to resolve the situation on our own and run the program. For the reason, this commit makes the test program runner function to still print the warning message but try parsing the interpreter of the program and explicitly run it with the interpreter, in the case. [1] https://lore.kernel.org/mm-commits/YRJisBs9AunccCD4@kroah.com/ Suggested-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: SeongJae Park <sjpark(a)amazon.de> --- Changes from v1 (https://lore.kernel.org/linux-kselftest/20210810140459.23990-1-sj38.park@gm…) - Parse and use the interpreter instead of changing the file tools/testing/selftests/kselftest/runner.sh | 28 +++++++++++++-------- 1 file changed, 18 insertions(+), 10 deletions(-) diff --git a/tools/testing/selftests/kselftest/runner.sh b/tools/testing/selftests/kselftest/runner.sh index cc9c846585f0..a9ba782d8ca0 100644 --- a/tools/testing/selftests/kselftest/runner.sh +++ b/tools/testing/selftests/kselftest/runner.sh @@ -33,9 +33,9 @@ tap_timeout() { # Make sure tests will time out if utility is available. if [ -x /usr/bin/timeout ] ; then - /usr/bin/timeout --foreground "$kselftest_timeout" "$1" + /usr/bin/timeout --foreground "$kselftest_timeout" $1 else - "$1" + $1 fi } @@ -65,17 +65,25 @@ run_one() TEST_HDR_MSG="selftests: $DIR: $BASENAME_TEST" echo "# $TEST_HDR_MSG" - if [ ! -x "$TEST" ]; then - echo -n "# Warning: file $TEST is " - if [ ! -e "$TEST" ]; then - echo "missing!" - else - echo "not executable, correct this." - fi + if [ ! -e "$TEST" ]; then + echo "# Warning: file $TEST is missing!" echo "not ok $test_num $TEST_HDR_MSG" else + cmd="./$BASENAME_TEST" + if [ ! -x "$TEST" ]; then + echo "# Warning: file $TEST is not executable" + + if [ $(head -n 1 "$TEST" | cut -c -2) = "#!" ] + then + interpreter=$(head -n 1 "$TEST" | cut -c 3-) + cmd="$interpreter ./$BASENAME_TEST" + else + echo "not ok $test_num $TEST_HDR_MSG" + return + fi + fi cd `dirname $TEST` > /dev/null - ((((( tap_timeout ./$BASENAME_TEST 2>&1; echo $? >&3) | + ((((( tap_timeout "$cmd" 2>&1; echo $? >&3) | tap_prefix >&4) 3>&1) | (read xs; exit $xs)) 4>>"$logfile" && echo "ok $test_num $TEST_HDR_MSG") || -- 2.17.1

1 year

3
6
0 0

[PATCH v2] selftests: netfilter: fix a build error on openSUSE

by Geliang Tang

This patch fixed the following build error on openSUSE Leap 15.3: ======================================================================= gcc nf-queue.c -lmnl -o tools/testing/selftests/netfilter/nf-queue nf-queue.c:13:10: fatal error: libmnl/libmnl.h: No such file or directory #include <libmnl/libmnl.h> ^~~~~~~~~~~~~~~~~ compilation terminated. ======================================================================= It is because libmnl.h is put in the directory of "/usr/include/libmnl/libmnl/" on openSUSE, not "/usr/include/libmnl/": > rpm -ql libmnl-devel /usr/include/libmnl /usr/include/libmnl/libmnl /usr/include/libmnl/libmnl/libmnl.h /usr/lib64/libmnl.so /usr/lib64/pkgconfig/libmnl.pc Suggested-by: Kai Liu <kai.liu(a)suse.com> Signed-off-by: Geliang Tang <geliang.tang(a)suse.com> --- v2: - use pkg-config --- tools/testing/selftests/netfilter/Makefile | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/testing/selftests/netfilter/Makefile b/tools/testing/selftests/netfilter/Makefile index e4f845dd942b..8136c1fab7ab 100644 --- a/tools/testing/selftests/netfilter/Makefile +++ b/tools/testing/selftests/netfilter/Makefile @@ -8,6 +8,7 @@ TEST_PROGS := nft_trans_stress.sh nft_fib.sh nft_nat.sh bridge_brouter.sh \ ipip-conntrack-mtu.sh conntrack_tcp_unreplied.sh \ conntrack_vrf.sh nft_synproxy.sh +CFLAGS += $(shell pkg-config --cflags libmnl 2>/dev/null || echo "-I/usr/include/libmnl") LDLIBS = -lmnl TEST_GEN_FILES = nf-queue -- 2.34.1

1 year

5
9
0 0

[PATCH v2] kselftest/alsa: Increase kselftest timeout

by Nícolas F. R. A. Prado

The default timeout for kselftests is 45 seconds, but that isn't enough time to run pcm-test when there are many PCMs on the device, nor for mixer-test when slower control buses and fancier CODECs are present. As data points, running pcm-test on mt8192-asurada-spherion takes about 1m15s, and mixer-test on rk3399-gru-kevin takes about 2m. Set the timeout to 4 minutes to allow both pcm-test and mixer-test to run to completion with some slack. Reviewed-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Nícolas F. R. A. Prado <nfraprado(a)collabora.com> --- Changes in v2: - Reduced timeout from 10 to 4 minutes - Tweaked commit message to also mention mixer-test and run time for mixer-test on rk3399-gru-kevin tools/testing/selftests/alsa/settings | 1 + 1 file changed, 1 insertion(+) create mode 100644 tools/testing/selftests/alsa/settings diff --git a/tools/testing/selftests/alsa/settings b/tools/testing/selftests/alsa/settings new file mode 100644 index 000000000000..b478e684846a --- /dev/null +++ b/tools/testing/selftests/alsa/settings @@ -0,0 +1 @@ +timeout=240 -- 2.39.0

1 year, 1 month

3
3
0 0

[PATCH v2 0/2] selftests/x86: AMX-related test improvements

by Chang S. Bae

Sorry for the delay in this update. Changes from v1: * Improve the skip message along with the changelog massage (Suah Khan). * Simplify the feature support check (Suah Khan). === Cover Letter === A couple of test updates are included: * With the STRICT_SIGALTSTACK_SIZE option [1,2], the kernel's altstack check becomes stringent. The x86 sigaltstack test is ignorant about this. Adjust the test now. This check was established [3] to ensure every AMX task's altstack is sufficient (regardless of that option) [4]. * The AMX test wrongly fails on non-AMX machines. Fix the code to skip the test instead. The series is available in this repository: git://github.com/intel/amx-linux.git selftest [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arc… [2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Doc… [3] 3aac3ebea08f ("x86/signal: Implement sigaltstack size validation") [4] 4b7ca609a33d ("x86/signal: Use fpu::__state_user_size for sigalt stack validation") Chang S. Bae (2): selftests/x86/signal: Adjust the test to the kernel's altstack check selftests/x86/amx: Fix the test to avoid failure when AMX is unavailable tools/testing/selftests/x86/amx.c | 31 ++++++++--------------- tools/testing/selftests/x86/sigaltstack.c | 14 +++++++++- 2 files changed, 23 insertions(+), 22 deletions(-) base-commit: 32346491ddf24599decca06190ebca03ff9de7f8 -- 2.17.1

1 year, 1 month

1
6
0 0

[V2 PATCH 0/6] KVM: selftests: selftests for fd-based private memory

by Vishal Annapurve

This series implements selftests targeting the feature floated by Chao via: https://lore.kernel.org/lkml/20221202061347.1070246-10-chao.p.peng@linux.in… Below changes aim to test the fd based approach for guest private memory in context of normal (non-confidential) VMs executing on non-confidential platforms. private_mem_test.c file adds selftest to access private memory from the guest via private/shared accesses and checking if the contents can be leaked to/accessed by vmm via shared memory view before/after conversions. Updates in V2: 1) Simplified vcpu run loop implementation API 2) Removed VM creation logic from private mem library Updates in V1 (Compared to RFC v3 patches): 1) Incorporated suggestions from Sean around simplifying KVM changes 2) Addressed comments from Sean 3) Added private mem test with shared memory backed by 2MB hugepages. V1 series: https://lore.kernel.org/lkml/20221111014244.1714148-1-vannapurve@google.com… This series has dependency on following patches: 1) V10 series patches from Chao mentioned above. Github link for the patches posted as part of this series: https://github.com/vishals4gh/linux/commits/priv_memfd_selftests_v2 Vishal Annapurve (6): KVM: x86: Add support for testing private memory KVM: Selftests: Add support for private memory KVM: selftests: x86: Add IS_ALIGNED/IS_PAGE_ALIGNED helpers KVM: selftests: x86: Add helpers to execute VMs with private memory KVM: selftests: Add get_free_huge_2m_pages KVM: selftests: x86: Add selftest for private memory arch/x86/kvm/mmu/mmu_internal.h | 6 +- tools/testing/selftests/kvm/.gitignore | 1 + tools/testing/selftests/kvm/Makefile | 2 + .../selftests/kvm/include/kvm_util_base.h | 15 +- .../testing/selftests/kvm/include/test_util.h | 5 + .../kvm/include/x86_64/private_mem.h | 24 ++ .../selftests/kvm/include/x86_64/processor.h | 1 + tools/testing/selftests/kvm/lib/kvm_util.c | 58 ++++- tools/testing/selftests/kvm/lib/test_util.c | 29 +++ .../selftests/kvm/lib/x86_64/private_mem.c | 139 ++++++++++++ .../selftests/kvm/x86_64/private_mem_test.c | 212 ++++++++++++++++++ virt/kvm/Kconfig | 4 + virt/kvm/kvm_main.c | 3 +- 13 files changed, 490 insertions(+), 9 deletions(-) create mode 100644 tools/testing/selftests/kvm/include/x86_64/private_mem.h create mode 100644 tools/testing/selftests/kvm/lib/x86_64/private_mem.c create mode 100644 tools/testing/selftests/kvm/x86_64/private_mem_test.c -- 2.39.0.rc0.267.gcb52ba06e7-goog

1 year, 2 months

5
26
0 0

[PATCH] selftests: pci: pci-selftest: add support for PCI endpoint driver test

by Aman Gupta

This patch enables the support to perform selftest on PCIe endpoint driver present in the system. The following tests are currently performed by the selftest utility 1. BAR Tests (BAR0 to BAR5) 2. MSI Interrupt Tests (MSI1 to MSI32) 3. Read Tests (For 1, 1024, 1025, 1024000, 1024001 Bytes) 4. Write Tests (For 1, 1024, 1025, 1024000, 1024001 Bytes) 5. Copy Tests (For 1, 1024, 1025, 1024000, 1024001 Bytes) Signed-off-by: Aman Gupta <aman1.gupta(a)samsung.com> Signed-off-by: Padmanabhan Rajanbabu <p.rajanbabu(a)samsung.com> --- tools/testing/selftests/Makefile | 1 + tools/testing/selftests/pci/.gitignore | 1 + tools/testing/selftests/pci/Makefile | 7 + tools/testing/selftests/pci/pci-selftest.c | 167 +++++++++++++++++++++ 4 files changed, 176 insertions(+) create mode 100644 tools/testing/selftests/pci/.gitignore create mode 100644 tools/testing/selftests/pci/Makefile create mode 100644 tools/testing/selftests/pci/pci-selftest.c diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index c2064a35688b..81584169a80f 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -49,6 +49,7 @@ TARGETS += net/forwarding TARGETS += net/mptcp TARGETS += netfilter TARGETS += nsfs +TARGETS += pci TARGETS += pidfd TARGETS += pid_namespace TARGETS += powerpc diff --git a/tools/testing/selftests/pci/.gitignore b/tools/testing/selftests/pci/.gitignore new file mode 100644 index 000000000000..db01411b8200 --- /dev/null +++ b/tools/testing/selftests/pci/.gitignore @@ -0,0 +1 @@ +pci-selftest diff --git a/tools/testing/selftests/pci/Makefile b/tools/testing/selftests/pci/Makefile new file mode 100644 index 000000000000..76b7725a45ae --- /dev/null +++ b/tools/testing/selftests/pci/Makefile @@ -0,0 +1,7 @@ +# SPDX-License-Identifier: GPL-2.0 +CFLAGS += -O2 -Wl,-no-as-needed -Wall +LDFLAGS += -lrt -lpthread -lm + +TEST_GEN_PROGS = pci-selftest + +include ../lib.mk diff --git a/tools/testing/selftests/pci/pci-selftest.c b/tools/testing/selftests/pci/pci-selftest.c new file mode 100644 index 000000000000..73e8f3eb1982 --- /dev/null +++ b/tools/testing/selftests/pci/pci-selftest.c @@ -0,0 +1,167 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * PCI Endpoint Driver Test Program + * + * Copyright (c) 2022 Samsung Electronics Co., Ltd. + * https://www.samsung.com + * Author: Aman Gupta <aman1.gupta(a)samsung.com> + */ + +#include <errno.h> +#include <fcntl.h> +#include <stdbool.h> +#include <stdio.h> +#include <stdlib.h> +#include <sys/ioctl.h> +#include <unistd.h> + +#include "../kselftest_harness.h" + +#define PCITEST_BAR _IO('P', 0x1) +#define PCITEST_LEGACY_IRQ _IO('P', 0x2) +#define PCITEST_MSI _IOW('P', 0x3, int) +#define PCITEST_WRITE _IOW('P', 0x4, unsigned long) +#define PCITEST_READ _IOW('P', 0x5, unsigned long) +#define PCITEST_COPY _IOW('P', 0x6, unsigned long) +#define PCITEST_MSIX _IOW('P', 0x7, int) +#define PCITEST_SET_IRQTYPE _IOW('P', 0x8, int) +#define PCITEST_GET_IRQTYPE _IO('P', 0x9) +#define PCITEST_CLEAR_IRQ _IO('P', 0x10) + +static char *test_device = "/dev/pci-endpoint-test.0"; + +struct xfer_param { + unsigned long size; + unsigned char flag; + }; + +FIXTURE(device) +{ + int fd; +}; + +FIXTURE_SETUP(device) +{ + + self->fd = open(test_device, O_RDWR); + + ASSERT_NE(-1, self->fd) { + TH_LOG("Can't open PCI Endpoint Test device\n"); + } +} + +FIXTURE_TEARDOWN(device) +{ + close(self->fd); +} + +TEST_F(device, BAR_TEST) +{ + int ret = -EINVAL; + int final = 0; + + for (int i = 0; i <= 5; i++) { + ret = ioctl(self->fd, PCITEST_BAR, i); + + EXPECT_EQ(1, ret) { + TH_LOG("TEST FAILED FOR BAR %d\n", i); + final++; + } + } + + ASSERT_EQ(0, final); +} + +TEST_F(device, MSI_TEST) +{ + int ret = -EINVAL; + int final = 0; + + ret = ioctl(self->fd, PCITEST_SET_IRQTYPE, 1); + ASSERT_EQ(1, ret); + + for (int i = 1; i <= 32; i++) { + ret = ioctl(self->fd, PCITEST_MSI, i); + EXPECT_EQ(1, ret) { + TH_LOG("TEST FAILED FOR MSI%d\n", i); + final++; + } + } + + ASSERT_EQ(0, final); +} + +TEST_F(device, READ_TEST) +{ + int final = 0; + int ret = -EINVAL; + unsigned long SIZE[5] = {1, 1024, 1025, 1024000, 1024001}; + + ret = ioctl(self->fd, PCITEST_SET_IRQTYPE, 1); + ASSERT_EQ(1, ret); + + struct xfer_param param; + + param.flag = 0; + for (int i = 0; i < 5; i++) { + param.size = SIZE[i]; + ret = ioctl(self->fd, PCITEST_READ, &param); + EXPECT_EQ(1, ret) { + TH_LOG("TEST FAILED FOR size =%ld.\n", SIZE[i]); + final++; + } + } + + ASSERT_EQ(0, final); +} + +TEST_F(device, WRITE_TEST) +{ + int final = 0; + int ret = -EINVAL; + unsigned long SIZE[5] = {1, 1024, 1025, 1024000, 1024001}; + + ret = ioctl(self->fd, PCITEST_SET_IRQTYPE, 1); + ASSERT_EQ(1, ret); + + struct xfer_param param; + + param.flag = 0; + + for (int i = 0; i < 5; i++) { + param.size = SIZE[i]; + ret = ioctl(self->fd, PCITEST_WRITE, &param); + EXPECT_EQ(1, ret) { + TH_LOG("TEST FAILED FOR size =%ld.\n", SIZE[i]); + final++; + } + } + + ASSERT_EQ(0, final); +} + +TEST_F(device, COPY_TEST) +{ + int final = 0; + int ret = -EINVAL; + unsigned long SIZE[5] = {1, 1024, 1025, 1024000, 1024001}; + + ret = ioctl(self->fd, PCITEST_SET_IRQTYPE, 1); + ASSERT_EQ(1, ret); + + struct xfer_param param; + + param.flag = 0; + + for (int i = 0; i < 5; i++) { + param.size = SIZE[i]; + ret = ioctl(self->fd, PCITEST_COPY, &param); + EXPECT_EQ(1, ret) { + TH_LOG("TEST FAILED FOR size =%ld.\n", SIZE[i]); + final++; + } + } + + ASSERT_EQ(0, final); +} +TEST_HARNESS_MAIN -- 2.17.1

1 year, 2 months

9
18
0 0

[PATCH v2 net-next] selftests: forwarding: add Per-Stream Filtering and Policing test for Ocelot

by Vladimir Oltean

The Felix VSC9959 switch in NXP LS1028A supports the tc-gate action which enforced time-based access control per stream. A stream as seen by this switch is identified by {MAC DA, VID}. We use the standard forwarding selftest topology with 2 host interfaces and 2 switch interfaces. The host ports must require timestamping non-IP packets and supporting tc-etf offload, for isochron to work. The isochron program monitors network sync status (ptp4l, phc2sys) and deterministically transmits packets to the switch such that the tc-gate action either (a) always accepts them based on its schedule, or (b) always drops them. I tried to keep as much of the logic that isn't specific to the NXP LS1028A in a new tsn_lib.sh, for future reuse. This covers synchronization using ptp4l and phc2sys, and isochron. The cycle-time chosen for this selftest isn't particularly impressive (and the focus is the functionality of the switch), but I didn't really know what to do better, considering that it will mostly be run during debugging sessions, various kernel bloatware would be enabled, like lockdep, KASAN, etc, and we certainly can't run any races with those on. I tried to look through the kselftest framework for other real time applications and didn't really find any, so I'm not sure how better to prepare the environment in case we want to go for a lower cycle time. At the moment, the only thing the selftest is ensuring is that dynamic frequency scaling is disabled on the CPU that isochron runs on. It would probably be useful to have a blacklist of kernel config options (checked through zcat /proc/config.gz) and some cyclictest scripts to run beforehand, but I saw none of those. Signed-off-by: Vladimir Oltean <vladimir.oltean(a)nxp.com> --- v1->v2: - fix an off-by-one bug introduced at the last minute regarding which tc-mqprio queue was used for tc-etf and SO_TXTIME - introduce debugging for packets incorrectly received / incorrectly dropped based on "isochron report" - make the tsn_lib.sh dependency on isochron and linuxptp optional via REQUIRE_ISOCHRON and REQUIRE_LINUXPTP - avoid errors when CONFIG_CPU_FREQ is disabled - consistently use SCHED_FIFO instead of SCHED_RR for the isochron receiver .../selftests/drivers/net/ocelot/psfp.sh | 327 ++++++++++++++++++ .../selftests/net/forwarding/tsn_lib.sh | 235 +++++++++++++ 2 files changed, 562 insertions(+) create mode 100755 tools/testing/selftests/drivers/net/ocelot/psfp.sh create mode 100644 tools/testing/selftests/net/forwarding/tsn_lib.sh diff --git a/tools/testing/selftests/drivers/net/ocelot/psfp.sh b/tools/testing/selftests/drivers/net/ocelot/psfp.sh new file mode 100755 index 000000000000..5a5cee92c665 --- /dev/null +++ b/tools/testing/selftests/drivers/net/ocelot/psfp.sh @@ -0,0 +1,327 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright 2021-2022 NXP + +# Note: On LS1028A, in lack of enough user ports, this setup requires patching +# the device tree to use the second CPU port as a user port + +WAIT_TIME=1 +NUM_NETIFS=4 +STABLE_MAC_ADDRS=yes +NETIF_CREATE=no +lib_dir=$(dirname $0)/../../../net/forwarding +source $lib_dir/tc_common.sh +source $lib_dir/lib.sh +source $lib_dir/tsn_lib.sh + +UDS_ADDRESS_H1="/var/run/ptp4l_h1" +UDS_ADDRESS_SWP1="/var/run/ptp4l_swp1" + +# Tunables +NUM_PKTS=1000 +STREAM_VID=100 +STREAM_PRIO=6 +# Use a conservative cycle of 10 ms to allow the test to still pass when the +# kernel has some extra overhead like lockdep etc +CYCLE_TIME_NS=10000000 +# Create two Gate Control List entries, one OPEN and one CLOSE, of equal +# durations +GATE_DURATION_NS=$((${CYCLE_TIME_NS} / 2)) +# Give 2/3 of the cycle time to user space and 1/3 to the kernel +FUDGE_FACTOR=$((${CYCLE_TIME_NS} / 3)) +# Shift the isochron base time by half the gate time, so that packets are +# always received by swp1 close to the middle of the time slot, to minimize +# inaccuracies due to network sync +SHIFT_TIME_NS=$((${GATE_DURATION_NS} / 2)) + +h1=${NETIFS[p1]} +swp1=${NETIFS[p2]} +swp2=${NETIFS[p3]} +h2=${NETIFS[p4]} + +H1_IPV4="192.0.2.1" +H2_IPV4="192.0.2.2" +H1_IPV6="2001:db8:1::1" +H2_IPV6="2001:db8:1::2" + +# Chain number exported by the ocelot driver for +# Per-Stream Filtering and Policing filters +PSFP() +{ + echo 30000 +} + +psfp_chain_create() +{ + local if_name=$1 + + tc qdisc add dev $if_name clsact + + tc filter add dev $if_name ingress chain 0 pref 49152 flower \ + skip_sw action goto chain $(PSFP) +} + +psfp_chain_destroy() +{ + local if_name=$1 + + tc qdisc del dev $if_name clsact +} + +psfp_filter_check() +{ + local expected=$1 + local packets="" + local drops="" + local stats="" + + stats=$(tc -j -s filter show dev ${swp1} ingress chain $(PSFP) pref 1) + packets=$(echo ${stats} | jq ".[1].options.actions[].stats.packets") + drops=$(echo ${stats} | jq ".[1].options.actions[].stats.drops") + + if ! [ "${packets}" = "${expected}" ]; then + printf "Expected filter to match on %d packets but matched on %d instead\n" \ + "${expected}" "${packets}" + fi + + echo "Hardware filter reports ${drops} drops" +} + +h1_create() +{ + simple_if_init $h1 $H1_IPV4/24 $H1_IPV6/64 +} + +h1_destroy() +{ + simple_if_fini $h1 $H1_IPV4/24 $H1_IPV6/64 +} + +h2_create() +{ + simple_if_init $h2 $H2_IPV4/24 $H2_IPV6/64 +} + +h2_destroy() +{ + simple_if_fini $h2 $H2_IPV4/24 $H2_IPV6/64 +} + +switch_create() +{ + local h2_mac_addr=$(mac_get $h2) + + ip link set ${swp1} up + ip link set ${swp2} up + + ip link add br0 type bridge vlan_filtering 1 + ip link set ${swp1} master br0 + ip link set ${swp2} master br0 + ip link set br0 up + + bridge vlan add dev ${swp2} vid ${STREAM_VID} + bridge vlan add dev ${swp1} vid ${STREAM_VID} + # PSFP on Ocelot requires the filter to also be added to the bridge + # FDB, and not be removed + bridge fdb add dev ${swp2} \ + ${h2_mac_addr} vlan ${STREAM_VID} static master + + psfp_chain_create ${swp1} + + tc filter add dev ${swp1} ingress chain $(PSFP) pref 1 \ + protocol 802.1Q flower skip_sw \ + dst_mac ${h2_mac_addr} vlan_id ${STREAM_VID} \ + action gate base-time 0.000000000 \ + sched-entry OPEN ${GATE_DURATION_NS} -1 -1 \ + sched-entry CLOSE ${GATE_DURATION_NS} -1 -1 +} + +switch_destroy() +{ + psfp_chain_destroy ${swp1} + ip link del br0 +} + +txtime_setup() +{ + local if_name=$1 + + tc qdisc add dev ${if_name} clsact + # Classify PTP on TC 7 and isochron on TC 6 + tc filter add dev ${if_name} egress protocol 0x88f7 \ + flower action skbedit priority 7 + tc filter add dev ${if_name} egress protocol 802.1Q \ + flower vlan_ethtype 0xdead action skbedit priority 6 + tc qdisc add dev ${if_name} handle 100: parent root mqprio num_tc 8 \ + queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \ + map 0 1 2 3 4 5 6 7 \ + hw 1 + # Set up TC 6 for SO_TXTIME. tc-mqprio queues count from 1. + tc qdisc replace dev ${if_name} parent 100:$((${STREAM_PRIO} + 1)) etf \ + clockid CLOCK_TAI offload delta ${FUDGE_FACTOR} +} + +txtime_cleanup() +{ + local if_name=$1 + + tc qdisc del dev ${if_name} root + tc qdisc del dev ${if_name} clsact +} + +setup_prepare() +{ + vrf_prepare + + h1_create + h2_create + switch_create + + txtime_setup ${h1} + + # Set up swp1 as a master PHC for h1, synchronized to the local + # CLOCK_REALTIME. + phc2sys_start ${swp1} ${UDS_ADDRESS_SWP1} + + # Assumption true for LS1028A: h1 and h2 use the same PHC. So by + # synchronizing h1 to swp1 via PTP, h2 is also implicitly synchronized + # to swp1 (and both to CLOCK_REALTIME). + ptp4l_start ${h1} true ${UDS_ADDRESS_H1} + ptp4l_start ${swp1} false ${UDS_ADDRESS_SWP1} + + # Make sure there are no filter matches at the beginning of the test + psfp_filter_check 0 +} + +cleanup() +{ + pre_cleanup + + ptp4l_stop ${swp1} + ptp4l_stop ${h1} + phc2sys_stop + isochron_recv_stop + + txtime_cleanup ${h1} + + h2_destroy + h1_destroy + switch_destroy + + vrf_cleanup +} + +debug_incorrectly_dropped_packets() +{ + local isochron_dat=$1 + local dropped_seqids + local seqid + + echo "Packets incorrectly dropped:" + + dropped_seqids=$(isochron report \ + --input-file "${isochron_dat}" \ + --printf-format "%u RX hw %T\n" \ + --printf-args "qR" | \ + grep 'RX hw 0.000000000' | \ + awk '{print $1}') + + for seqid in ${dropped_seqids}; do + isochron report \ + --input-file "${isochron_dat}" \ + --start ${seqid} --stop ${seqid} \ + --printf-format "seqid %u scheduled for %T, HW TX timestamp %T\n" \ + --printf-args "qST" + done +} + +debug_incorrectly_received_packets() +{ + local isochron_dat=$1 + + echo "Packets incorrectly received:" + + isochron report \ + --input-file "${isochron_dat}" \ + --printf-format "seqid %u scheduled for %T, HW TX timestamp %T, HW RX timestamp %T\n" \ + --printf-args "qSTR" | + grep -v 'HW RX timestamp 0.000000000' +} + +run_test() +{ + local base_time=$1 + local expected=$2 + local test_name=$3 + local debug=$4 + local isochron_dat="$(mktemp)" + local extra_args="" + local received + + isochron_do \ + "${h1}" \ + "${h2}" \ + "${UDS_ADDRESS_H1}" \ + "" \ + "${base_time}" \ + "${CYCLE_TIME_NS}" \ + "${SHIFT_TIME_NS}" \ + "${NUM_PKTS}" \ + "${STREAM_VID}" \ + "${STREAM_PRIO}" \ + "" \ + "${isochron_dat}" + + # Count all received packets by looking at the non-zero RX timestamps + received=$(isochron report \ + --input-file "${isochron_dat}" \ + --printf-format "%u\n" --printf-args "R" | \ + grep -w -v '0' | wc -l) + + if [ "${received}" = "${expected}" ]; then + RET=0 + else + RET=1 + echo "Expected isochron to receive ${expected} packets but received ${received}" + fi + + log_test "${test_name}" + + if [ "$RET" = "1" ]; then + ${debug} "${isochron_dat}" + fi + + rm ${isochron_dat} 2> /dev/null +} + +test_gate_in_band() +{ + # Send packets in-band with the OPEN gate entry + run_test 0.000000000 ${NUM_PKTS} "In band" \ + debug_incorrectly_dropped_packets + + psfp_filter_check ${NUM_PKTS} +} + +test_gate_out_of_band() +{ + # Send packets in-band with the CLOSE gate entry + run_test 0.005000000 0 "Out of band" \ + debug_incorrectly_received_packets + + psfp_filter_check $((2 * ${NUM_PKTS})) +} + +trap cleanup EXIT + +ALL_TESTS=" + test_gate_in_band + test_gate_out_of_band +" + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/net/forwarding/tsn_lib.sh b/tools/testing/selftests/net/forwarding/tsn_lib.sh new file mode 100644 index 000000000000..60a1423e8116 --- /dev/null +++ b/tools/testing/selftests/net/forwarding/tsn_lib.sh @@ -0,0 +1,235 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright 2021-2022 NXP + +REQUIRE_ISOCHRON=${REQUIRE_ISOCHRON:=yes} +REQUIRE_LINUXPTP=${REQUIRE_LINUXPTP:=yes} + +# Tunables +UTC_TAI_OFFSET=37 +ISOCHRON_CPU=1 + +if [[ "$REQUIRE_ISOCHRON" = "yes" ]]; then + # https://github.com/vladimiroltean/tsn-scripts + # WARNING: isochron versions pre-1.0 are unstable, + # always use the latest version + require_command isochron +fi +if [[ "$REQUIRE_LINUXPTP" = "yes" ]]; then + require_command phc2sys + require_command ptp4l +fi + +phc2sys_start() +{ + local if_name=$1 + local uds_address=$2 + local extra_args="" + + if ! [ -z "${uds_address}" ]; then + extra_args="${extra_args} -z ${uds_address}" + fi + + phc2sys_log="$(mktemp)" + + chrt -f 10 phc2sys -m \ + -c ${if_name} \ + -s CLOCK_REALTIME \ + -O ${UTC_TAI_OFFSET} \ + --step_threshold 0.00002 \ + --first_step_threshold 0.00002 \ + ${extra_args} \ + > "${phc2sys_log}" 2>&1 & + phc2sys_pid=$! + + echo "phc2sys logs to ${phc2sys_log} and has pid ${phc2sys_pid}" + + sleep 1 +} + +phc2sys_stop() +{ + { kill ${phc2sys_pid} && wait ${phc2sys_pid}; } 2> /dev/null + rm "${phc2sys_log}" 2> /dev/null +} + +ptp4l_start() +{ + local if_name=$1 + local slave_only=$2 + local uds_address=$3 + local log="ptp4l_log_${if_name}" + local pid="ptp4l_pid_${if_name}" + local extra_args="" + + if [ "${slave_only}" = true ]; then + extra_args="${extra_args} -s" + fi + + # declare dynamic variables ptp4l_log_${if_name} and ptp4l_pid_${if_name} + # as global, so that they can be referenced later + declare -g "${log}=$(mktemp)" + + chrt -f 10 ptp4l -m -2 -P \ + -i ${if_name} \ + --step_threshold 0.00002 \ + --first_step_threshold 0.00002 \ + --tx_timestamp_timeout 100 \ + --uds_address="${uds_address}" \ + ${extra_args} \ + > "${!log}" 2>&1 & + declare -g "${pid}=$!" + + echo "ptp4l for interface ${if_name} logs to ${!log} and has pid ${!pid}" + + sleep 1 +} + +ptp4l_stop() +{ + local if_name=$1 + local log="ptp4l_log_${if_name}" + local pid="ptp4l_pid_${if_name}" + + { kill ${!pid} && wait ${!pid}; } 2> /dev/null + rm "${!log}" 2> /dev/null +} + +cpufreq_max() +{ + local cpu=$1 + local freq="cpu${cpu}_freq" + local governor="cpu${cpu}_governor" + + # Kernel may be compiled with CONFIG_CPU_FREQ disabled + if ! [ -d /sys/bus/cpu/devices/cpu${cpu}/cpufreq ]; then + return + fi + + # declare dynamic variables cpu${cpu}_freq and cpu${cpu}_governor as + # global, so they can be referenced later + declare -g "${freq}=$(cat /sys/bus/cpu/devices/cpu${cpu}/cpufreq/scaling_min_freq)" + declare -g "${governor}=$(cat /sys/bus/cpu/devices/cpu${cpu}/cpufreq/scaling_governor)" + + cat /sys/bus/cpu/devices/cpu${cpu}/cpufreq/scaling_max_freq > \ + /sys/bus/cpu/devices/cpu${cpu}/cpufreq/scaling_min_freq + echo -n "performance" > \ + /sys/bus/cpu/devices/cpu${cpu}/cpufreq/scaling_governor +} + +cpufreq_restore() +{ + local cpu=$1 + local freq="cpu${cpu}_freq" + local governor="cpu${cpu}_governor" + + if ! [ -d /sys/bus/cpu/devices/cpu${cpu}/cpufreq ]; then + return + fi + + echo "${!freq}" > /sys/bus/cpu/devices/cpu${cpu}/cpufreq/scaling_min_freq + echo -n "${!governor}" > \ + /sys/bus/cpu/devices/cpu${cpu}/cpufreq/scaling_governor +} + +isochron_recv_start() +{ + local if_name=$1 + local uds=$2 + local extra_args=$3 + + if ! [ -z "${uds}" ]; then + extra_args="--unix-domain-socket ${uds}" + fi + + isochron rcv \ + --interface ${if_name} \ + --sched-priority 98 \ + --sched-fifo \ + --utc-tai-offset ${UTC_TAI_OFFSET} \ + --quiet \ + ${extra_args} & \ + isochron_pid=$! + + sleep 1 +} + +isochron_recv_stop() +{ + { kill ${isochron_pid} && wait ${isochron_pid}; } 2> /dev/null +} + +isochron_do() +{ + local sender_if_name=$1; shift + local receiver_if_name=$1; shift + local sender_uds=$1; shift + local receiver_uds=$1; shift + local base_time=$1; shift + local cycle_time=$1; shift + local shift_time=$1; shift + local num_pkts=$1; shift + local vid=$1; shift + local priority=$1; shift + local dst_ip=$1; shift + local isochron_dat=$1; shift + local extra_args="" + local receiver_extra_args="" + local vrf="$(master_name_get ${sender_if_name})" + local use_l2="true" + + if ! [ -z "${dst_ip}" ]; then + use_l2="false" + fi + + if ! [ -z "${vrf}" ]; then + dst_ip="${dst_ip}%${vrf}" + fi + + if ! [ -z "${vid}" ]; then + vid="--vid=${vid}" + fi + + if [ -z "${receiver_uds}" ]; then + extra_args="${extra_args} --omit-remote-sync" + fi + + if ! [ -z "${shift_time}" ]; then + extra_args="${extra_args} --shift-time=${shift_time}" + fi + + if [ "${use_l2}" = "true" ]; then + extra_args="${extra_args} --l2 --etype=0xdead ${vid}" + receiver_extra_args="--l2 --etype=0xdead" + else + extra_args="${extra_args} --l4 --ip-destination=${dst_ip}" + receiver_extra_args="--l4" + fi + + cpufreq_max ${ISOCHRON_CPU} + + isochron_recv_start "${h2}" "${receiver_uds}" "${receiver_extra_args}" + + isochron send \ + --interface ${sender_if_name} \ + --unix-domain-socket ${sender_uds} \ + --priority ${priority} \ + --base-time ${base_time} \ + --cycle-time ${cycle_time} \ + --num-frames ${num_pkts} \ + --frame-size 64 \ + --txtime \ + --utc-tai-offset ${UTC_TAI_OFFSET} \ + --cpu-mask $((1 << ${ISOCHRON_CPU})) \ + --sched-fifo \ + --sched-priority 98 \ + --client 127.0.0.1 \ + --sync-threshold 5000 \ + --output-file ${isochron_dat} \ + ${extra_args} \ + --quiet + + isochron_recv_stop + + cpufreq_restore ${ISOCHRON_CPU} +} -- 2.25.1

1 year, 2 months

5
13
0 0

[PATCH i-g-t v2 0/4] Add support for KUnit tests

by Isabella Basso

This patch series was first developed as part of the LKCamp hackathon that happened last year[1], mainly focusing on refactoring DRM tests to use KUnit. KUnit[2][3] is a unified test framework that provides helper tools, simplifying their development and execution. Using an x86-64 machine it's possible to run tests in the host's kernel natively using user-mode Linux[4] (aka UML), which simplifies usage in a wide variety of scenarios, including integration to CI. As the tool's adoption widens into graphics testing territory, I and LKCamp members figured it would be important to support it in IGT, as it's a core tool for GPU drivers maintainers. I have then added KUnit support into IGT mainly following the KTAP specs, and it can be tested using patch 4/4 in this series together with a DRM selftests patch series available at [5]. Changes since v1: - Major rework of parsing function structure: - It is not longer recursive - Adapt kselftests functions and structs to be used with KUnit - Switch DRM selftests to KUnit parsing as they're updated in the kernel - Replace AMD KUnit tests by DRM selftests [1]: https://groups.google.com/g/kunit-dev/c/YqFR1q2uZvk/m/IbvItSfHBAAJ [2]: https://kunit.dev [3]: https://docs.kernel.org/dev-tools/kunit/index.html [4]: http://user-mode-linux.sourceforge.net [5]: https://lore.kernel.org/all/20220708203052.236290-1-maira.canal@usp.br/ Isabella Basso (4): lib/igt_kmod: rename kselftest functions to ktest lib/igt_kmod.c: check if module is builtin before attempting to unload it lib/igt_kmod: add compatibility for KUnit tests: DRM selftests: switch to KUnit lib/igt_kmod.c | 315 +++++++++++++++++++++++++++++++++++++++++-- lib/igt_kmod.h | 14 +- tests/drm_buddy.c | 7 +- tests/drm_mm.c | 7 +- tests/kms_selftest.c | 12 +- 5 files changed, 329 insertions(+), 26 deletions(-) -- 2.37.2

1 year, 2 months

6
29
0 0

[PATCH] selftests: fix LLVM build for i386 and x86_64

by Guillaume Tucker

Add missing cases for the i386 and x86_64 architectures when determining the LLVM target for building kselftest. Fixes: 795285ef2425 ("selftests: Fix clang cross compilation") Signed-off-by: Guillaume Tucker <guillaume.tucker(a)collabora.com> --- tools/testing/selftests/lib.mk | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tools/testing/selftests/lib.mk b/tools/testing/selftests/lib.mk index b1c62914366b..cc4c443d5b14 100644 --- a/tools/testing/selftests/lib.mk +++ b/tools/testing/selftests/lib.mk @@ -10,12 +10,14 @@ endif CLANG_TARGET_FLAGS_arm := arm-linux-gnueabi CLANG_TARGET_FLAGS_arm64 := aarch64-linux-gnu CLANG_TARGET_FLAGS_hexagon := hexagon-linux-musl +CLANG_TARGET_FLAGS_i386 := i386-linux-gnu CLANG_TARGET_FLAGS_m68k := m68k-linux-gnu CLANG_TARGET_FLAGS_mips := mipsel-linux-gnu CLANG_TARGET_FLAGS_powerpc := powerpc64le-linux-gnu CLANG_TARGET_FLAGS_riscv := riscv64-linux-gnu CLANG_TARGET_FLAGS_s390 := s390x-linux-gnu CLANG_TARGET_FLAGS_x86 := x86_64-linux-gnu +CLANG_TARGET_FLAGS_x86_64 := x86_64-linux-gnu CLANG_TARGET_FLAGS := $(CLANG_TARGET_FLAGS_$(ARCH)) ifeq ($(CROSS_COMPILE),) -- 2.30.2

1 year, 3 months

2
2
0 0

[PATCH] selftests: add missing ')' in lib.mk

by Guillaume Tucker

Add missing closing ')' in lib.mk in a call to $error(). This only affects LLVM / Clang builds. Fixes: 795285ef2425 ("selftests: Fix clang cross compilation") Signed-off-by: Guillaume Tucker <guillaume.tucker(a)collabora.com> --- tools/testing/selftests/lib.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/lib.mk b/tools/testing/selftests/lib.mk index 947fc72413e9..a87f60873e5b 100644 --- a/tools/testing/selftests/lib.mk +++ b/tools/testing/selftests/lib.mk @@ -20,7 +20,7 @@ CLANG_TARGET_FLAGS := $(CLANG_TARGET_FLAGS_$(ARCH)) ifeq ($(CROSS_COMPILE),) ifeq ($(CLANG_TARGET_FLAGS),) -$(error Specify CROSS_COMPILE or add '--target=' option to lib.mk +$(error Specify CROSS_COMPILE or add '--target=' option to lib.mk) else CLANG_FLAGS += --target=$(CLANG_TARGET_FLAGS) endif # CLANG_TARGET_FLAGS -- 2.30.2

1 year, 3 months

3
3
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror December 2022