April 2022 - Linux-kselftest-mirror

[PATCH v2 0/3] kselftest/arm64: Test ptrace writing via FPSIMD and reading via SVE

by Mark Brown

This series has a couple of minor fixes and cleanups for sve-ptrace plus the addition of a new test which validates that we can write using the FPSIMD regset and then read matching data back using the SVE regset - previously we only validated writing SVE and reading FPSIMD data. v2 - Rebase onto v5.18-rc1 Mark Brown (3): kselftest/arm64: Fix comment for ptrace_sve_get_fpsimd_data() kselftest/arm64: Remove assumption that tasks start FPSIMD only kselftest/arm64: Validate setting via FPSIMD and read via SVE regsets tools/testing/selftests/arm64/fp/sve-ptrace.c | 164 +++++++++++++++--- 1 file changed, 139 insertions(+), 25 deletions(-) base-commit: 3123109284176b1532874591f7c81f3837bbdc17 -- 2.30.2

2 years

2
4
0 0

[PATCH bpf-next v5 0/5] New BPF helpers to accelerate synproxy

by Maxim Mikityanskiy

The first patch of this series is an improvement to the existing syncookie BPF helper. The second patch is a documentation fix. The third patch allows BPF helpers to accept memory regions of fixed size without doing runtime size checks. The two last patches add new functionality that allows XDP to accelerate iptables synproxy. v1 of this series [1] used to include a patch that exposed conntrack lookup to BPF using stable helpers. It was superseded by series [2] by Kumar Kartikeya Dwivedi, which implements this functionality using unstable helpers. The fourth patch adds new helpers to issue and check SYN cookies without binding to a socket, which is useful in the synproxy scenario. The fifth patch adds a selftest, which consists of a script, an XDP program and a userspace control application. The XDP program uses socketless SYN cookie helpers and queries conntrack status instead of socket status. The userspace control application allows to tune parameters of the XDP program. This program also serves as a minimal example of usage of the new functionality. The draft of the new functionality was presented on Netdev 0x15 [3]. v2 changes: Split into two series, submitted bugfixes to bpf, dropped the conntrack patches, implemented the timestamp cookie in BPF using bpf_loop, dropped the timestamp cookie patch. v3 changes: Moved some patches from bpf to bpf-next, dropped the patch that changed error codes, split the new helpers into IPv4/IPv6, added verifier functionality to accept memory regions of fixed size. v4 changes: Converted the selftest to the test_progs runner. Replaced some deprecated functions in xdp_synproxy userspace helper. v5 changes: Fixed a bug in the selftest. Added questionable functionality to support new helpers in TC BPF, added selftests for it. [1]: https://lore.kernel.org/bpf/20211020095815.GJ28644@breakpoint.cc/t/ [2]: https://lore.kernel.org/bpf/20220114163953.1455836-1-memxor@gmail.com/ [3]: https://netdevconf.info/0x15/session.html?Accelerating-synproxy-with-XDP Maxim Mikityanskiy (6): bpf: Use ipv6_only_sock in bpf_tcp_gen_syncookie bpf: Fix documentation of th_len in bpf_tcp_{gen,check}_syncookie bpf: Allow helpers to accept pointers with a fixed size bpf: Add helpers to issue and check SYN cookies in XDP bpf: Add selftests for raw syncookie helpers bpf: Allow the new syncookie helpers to work with SKBs include/linux/bpf.h | 10 + include/net/tcp.h | 1 + include/uapi/linux/bpf.h | 100 ++- kernel/bpf/verifier.c | 26 +- net/core/filter.c | 136 ++- net/ipv4/tcp_input.c | 3 +- scripts/bpf_doc.py | 4 + tools/include/uapi/linux/bpf.h | 100 ++- tools/testing/selftests/bpf/.gitignore | 1 + tools/testing/selftests/bpf/Makefile | 2 +- .../selftests/bpf/prog_tests/xdp_synproxy.c | 144 +++ .../selftests/bpf/progs/xdp_synproxy_kern.c | 819 ++++++++++++++++++ tools/testing/selftests/bpf/xdp_synproxy.c | 466 ++++++++++ 13 files changed, 1790 insertions(+), 22 deletions(-) create mode 100644 tools/testing/selftests/bpf/prog_tests/xdp_synproxy.c create mode 100644 tools/testing/selftests/bpf/progs/xdp_synproxy_kern.c create mode 100644 tools/testing/selftests/bpf/xdp_synproxy.c -- 2.30.2

2 years

2
8
0 0

[RFC v5 0/6] Proposal for a GPU cgroup controller

by T.J. Mercier

This patch series revisits the proposal for a GPU cgroup controller to track and limit memory allocations by various device/allocator subsystems. The patch series also contains a simple prototype to illustrate how Android intends to implement DMA-BUF allocator attribution using the GPU cgroup controller. The prototype does not include resource limit enforcements. Changelog: v5: Rebase on top of v5.18-rc3 Drop the global GPU cgroup "total" (sum of all device totals) portion of the design since there is no currently known use for this per Tejun Heo. Fix commit message which still contained the old name for dma_buf_transfer_charge per Michal Koutný. Remove all GPU cgroup code except what's necessary to support charge transfer from dma_buf. Previously charging was done in export, but for non-Android graphics use-cases this is not ideal since there may be a delay between allocation and export, during which time there is no accounting. Merge dmabuf: Use the GPU cgroup charge/uncharge APIs patch into dmabuf: heaps: export system_heap buffers with GPU cgroup charging as a result of above. Put the charge and uncharge code in the same file (system_heap_allocate, system_heap_dma_buf_release) instead of splitting them between the heap and the dma_buf_release. This avoids asymmetric management of the gpucg charges. Modify the dma_buf_transfer_charge API to accept a task_struct instead of a gpucg. This avoids requiring the caller to manage the refcount of the gpucg upon failure and confusing ownership transfer logic. Support all strings for gpucg_register_bucket instead of just string literals. Enforce globally unique gpucg_bucket names. Constrain gpucg_bucket name lengths to 64 bytes. Append "-heap" to gpucg_bucket names from dmabuf-heaps. Drop patch 7 from the series, which changed the types of binder_transaction_data's sender_pid and sender_euid fields. This was done in another commit here: https://lore.kernel.org/all/20220210021129.3386083-4-masahiroy@kernel.org/ Rename: gpucg_try_charge -> gpucg_charge find_cg_rpool_locked -> cg_rpool_find_locked init_cg_rpool -> cg_rpool_init get_cg_rpool_locked -> cg_rpool_get_locked "gpu cgroup controller" -> "GPU controller" gpucg_device -> gpucg_bucket usage -> size Tests: Support both binder_fd_array_object and binder_fd_object. This is necessary because new versions of Android will use binder_fd_object instead of binder_fd_array_object, and we need to support both. Tests for both binder_fd_array_object and binder_fd_object. For binder_utils return error codes instead of struct binder{fs}_ctx. Use ifdef __ANDROID__ to choose platform-dependent temp path instead of a runtime fallback. Ensure binderfs_mntpt ends with a trailing '/' character instead of prepending it where used. v4: Skip test if not run as root per Shuah Khan Add better test logging for abnormal child termination per Shuah Khan Adjust ordering of charge/uncharge during transfer to avoid potentially hitting cgroup limit per Michal Koutný Adjust gpucg_try_charge critical section for charge transfer functionality Fix uninitialized return code error for dmabuf_try_charge error case v3: Remove Upstreaming Plan from gpu-cgroup.rst per John Stultz Use more common dual author commit message format per John Stultz Remove android from binder changes title per Todd Kjos Add a kselftest for this new behavior per Greg Kroah-Hartman Include details on behavior for all combinations of kernel/userspace versions in changelog (thanks Suren Baghdasaryan) per Greg Kroah-Hartman. Fix pid and uid types in binder UAPI header v2: See the previous revision of this change submitted by Hridya Valsaraju at: https://lore.kernel.org/all/20220115010622.3185921-1-hridya@google.com/ Move dma-buf cgroup charge transfer from a dma_buf_op defined by every heap to a single dma-buf function for all heaps per Daniel Vetter and Christian König. Pointers to struct gpucg and struct gpucg_device tracking the current associations were added to the dma_buf struct to achieve this. Fix incorrect Kconfig help section indentation per Randy Dunlap. History of the GPU cgroup controller ==================================== The GPU/DRM cgroup controller came into being when a consensus[1] was reached that the resources it tracked were unsuitable to be integrated into memcg. Originally, the proposed controller was specific to the DRM subsystem and was intended to track GEM buffers and GPU-specific resources[2]. In order to help establish a unified memory accounting model for all GPU and all related subsystems, Daniel Vetter put forth a suggestion to move it out of the DRM subsystem so that it can be used by other DMA-BUF exporters as well[3]. This RFC proposes an interface that does the same. [1]: https://patchwork.kernel.org/project/dri-devel/cover/20190501140438.9506-1-… [2]: https://lore.kernel.org/amd-gfx/20210126214626.16260-1-brian.welty@intel.co… [3]: https://lore.kernel.org/amd-gfx/YCVOl8%2F87bqRSQei@phenom.ffwll.local/ Hridya Valsaraju (3): gpu: rfc: Proposal for a GPU cgroup controller cgroup: gpu: Add a cgroup controller for allocator attribution of GPU memory binder: Add flags to relinquish ownership of fds T.J. Mercier (3): dmabuf: heaps: export system_heap buffers with GPU cgroup charging dmabuf: Add gpu cgroup charge transfer function selftests: Add binder cgroup gpu memory transfer tests Documentation/gpu/rfc/gpu-cgroup.rst | 190 +++++++ Documentation/gpu/rfc/index.rst | 4 + drivers/android/binder.c | 27 +- drivers/dma-buf/dma-buf.c | 80 ++- drivers/dma-buf/dma-heap.c | 39 ++ drivers/dma-buf/heaps/system_heap.c | 28 +- include/linux/cgroup_gpu.h | 137 +++++ include/linux/cgroup_subsys.h | 4 + include/linux/dma-buf.h | 49 +- include/linux/dma-heap.h | 15 + include/uapi/linux/android/binder.h | 23 +- init/Kconfig | 7 + kernel/cgroup/Makefile | 1 + kernel/cgroup/gpu.c | 386 +++++++++++++ .../selftests/drivers/android/binder/Makefile | 8 + .../drivers/android/binder/binder_util.c | 250 +++++++++ .../drivers/android/binder/binder_util.h | 32 ++ .../selftests/drivers/android/binder/config | 4 + .../binder/test_dmabuf_cgroup_transfer.c | 526 ++++++++++++++++++ 19 files changed, 1787 insertions(+), 23 deletions(-) create mode 100644 Documentation/gpu/rfc/gpu-cgroup.rst create mode 100644 include/linux/cgroup_gpu.h create mode 100644 kernel/cgroup/gpu.c create mode 100644 tools/testing/selftests/drivers/android/binder/Makefile create mode 100644 tools/testing/selftests/drivers/android/binder/binder_util.c create mode 100644 tools/testing/selftests/drivers/android/binder/binder_util.h create mode 100644 tools/testing/selftests/drivers/android/binder/config create mode 100644 tools/testing/selftests/drivers/android/binder/test_dmabuf_cgroup_transfer.c -- 2.36.0.rc0.470.gd361397f0d-goog

2 years

2
3
0 0

[GIT PULL drivers/misc] lkdtm updates for next

by Kees Cook

Hi Greg, Please pull these lkdtm updates for -next. Thanks! -Kees The following changes since commit ce522ba9ef7e2d9fb22a39eb3371c0c64e2a433e: Linux 5.18-rc2 (2022-04-10 14:21:36 -1000) are available in the Git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git tags/lkdtm-next for you to fetch changes up to 2e53b877dc1258d4ac3de98f496bb88ec3bf5e25: lkdtm: Add CFI_BACKWARD to test ROP mitigations (2022-04-16 13:57:23 -0700) ---------------------------------------------------------------- lkdtm updates for next Christophe Leroy (1): lkdtm/bugs: Don't expect thread termination without CONFIG_UBSAN_TRAP Jiasheng Jiang (1): lkdtm/bugs: Check for the NULL pointer after calling kmalloc Kees Cook (4): lkdtm/heap: Note conditions for SLAB_LINEAR_OVERFLOW lkdtm/usercopy: Expand size of "out of frame" object lkdtm: Move crashtype definitions into each category lkdtm: Add CFI_BACKWARD to test ROP mitigations ---------------------------------------------------------------- drivers/misc/lkdtm/bugs.c | 96 +++++++++++++++------ drivers/misc/lkdtm/cfi.c | 145 +++++++++++++++++++++++++++++++- drivers/misc/lkdtm/core.c | 138 +++++++----------------------- drivers/misc/lkdtm/fortify.c | 17 +++- drivers/misc/lkdtm/heap.c | 47 ++++++++--- drivers/misc/lkdtm/lkdtm.h | 142 ++++++++----------------------- drivers/misc/lkdtm/perms.c | 47 ++++++++--- drivers/misc/lkdtm/powerpc.c | 11 ++- drivers/misc/lkdtm/refcount.c | 65 +++++++++----- drivers/misc/lkdtm/stackleak.c | 11 ++- drivers/misc/lkdtm/usercopy.c | 49 ++++++++--- tools/testing/selftests/lkdtm/config | 2 + tools/testing/selftests/lkdtm/tests.txt | 1 + 13 files changed, 471 insertions(+), 300 deletions(-) -- Kees Cook

2 years

2
1
0 0

kselftest/fixes build: 8 builds: 0 failed, 8 passed (linux-kselftest-fixes-5.18-rc3-4-ge8f0c8965932)

by kernelci.org bot

kselftest/fixes build: 8 builds: 0 failed, 8 passed (linux-kselftest-fixes-5.18-rc3-4-ge8f0c8965932) Full Build Summary: https://kernelci.org/build/kselftest/branch/fixes/kernel/linux-kselftest-fi… Tree: kselftest Branch: fixes Git Describe: linux-kselftest-fixes-5.18-rc3-4-ge8f0c8965932 Git Commit: e8f0c89659323f3ddf60dcedcd56fe3ac36a37bf Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git Built: 4 unique architectures ================================================================================ Detailed per-defconfig build reports: -------------------------------------------------------------------------------- defconfig+kselftest (arm64, gcc-10) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+kselftest (arm64, clang-14) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+kselftest+arm64-chromebook (arm64, gcc-10) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+kselftest+arm64-chromebook (arm64, clang-14) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- i386_defconfig+kselftest (i386, gcc-10) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- multi_v7_defconfig+kselftest (arm, gcc-10) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- x86_64_defconfig+kselftest (x86_64, gcc-10) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- x86_64_defconfig+kselftest (x86_64, clang-14) — PASS, 0 errors, 0 warnings, 0 section mismatches --- For more info write to <info(a)kernelci.org>

2 years

1
0
0 0

[PATCH v2 1/4] selftest/vm: verify mmap addr in mremap_test

by Sidhartha Kumar

Avoid calling mmap with requested addresses that are less than the system's mmap_min_addr. When run as root, mmap returns EACCES when trying to map addresses < mmap_min_addr. This is not one of the error codes for the condition to retry the mmap in the test. Rather than arbitrarily retrying on EACCES, don't attempt an mmap until addr > vm.mmap_min_addr. Add a munmap call after an alignment check as the mappings are retained after the retry and can reach the vm.max_map_count sysctl. Signed-off-by: Sidhartha Kumar <sidhartha.kumar(a)oracle.com> --- v2: -change comment for description of get_mmap_min_addr() -fix commit message formatting tools/testing/selftests/vm/mremap_test.c | 41 +++++++++++++++++++++++- 1 file changed, 40 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/vm/mremap_test.c b/tools/testing/selftests/vm/mremap_test.c index 0624d1bd71b5..2b3b4f15185f 100644 --- a/tools/testing/selftests/vm/mremap_test.c +++ b/tools/testing/selftests/vm/mremap_test.c @@ -6,6 +6,7 @@ #include <errno.h> #include <stdlib.h> +#include <stdio.h> #include <string.h> #include <sys/mman.h> #include <time.h> @@ -64,6 +65,35 @@ enum { .expect_failure = should_fail \ } +/* Returns mmap_min_addr sysctl tunable from procfs */ +static unsigned long long get_mmap_min_addr(void) +{ + FILE *fp; + int n_matched; + static unsigned long long addr; + + if (addr) + return addr; + + fp = fopen("/proc/sys/vm/mmap_min_addr", "r"); + if (fp == NULL) { + ksft_print_msg("Failed to open /proc/sys/vm/mmap_min_addr: %s\n", + strerror(errno)); + exit(KSFT_SKIP); + } + + n_matched = fscanf(fp, "%llu", &addr); + if (n_matched != 1) { + ksft_print_msg("Failed to read /proc/sys/vm/mmap_min_addr: %s\n", + strerror(errno)); + fclose(fp); + exit(KSFT_SKIP); + } + + fclose(fp); + return addr; +} + /* * Returns the start address of the mapping on success, else returns * NULL on failure. @@ -72,8 +102,15 @@ static void *get_source_mapping(struct config c) { unsigned long long addr = 0ULL; void *src_addr = NULL; + unsigned long long mmap_min_addr; + + mmap_min_addr = get_mmap_min_addr(); + retry: addr += c.src_alignment; + if (addr < mmap_min_addr) + goto retry; + src_addr = mmap((void *) addr, c.region_size, PROT_READ | PROT_WRITE, MAP_FIXED_NOREPLACE | MAP_ANONYMOUS | MAP_SHARED, -1, 0); @@ -91,8 +128,10 @@ static void *get_source_mapping(struct config c) * alignment in the tests. */ if (((unsigned long long) src_addr & (c.src_alignment - 1)) || - !((unsigned long long) src_addr & c.src_alignment)) + !((unsigned long long) src_addr & c.src_alignment)) { + munmap(src_addr, c.region_size); goto retry; + } if (!src_addr) goto error; -- 2.27.0

2 years

3
6
0 0

[PATCH bpf-next] selftests/bpf: fix prog_tests/uprobe_autoattach compilation error

by Artem Savkov

I am getting the following compilation error for prog_tests/uprobe_autoattach.c tools/testing/selftests/bpf/prog_tests/uprobe_autoattach.c: In function ‘test_uprobe_autoattach’: ./test_progs.h:209:26: error: pointer ‘mem’ may be used after ‘free’ [-Werror=use-after-free] mem variable is now used in one of the asserts so it shouldn't be freed right away. Move free(mem) after the assert block. Fixes: 1717e248014c ("selftests/bpf: Uprobe tests should verify param/return values") Signed-off-by: Artem Savkov <asavkov(a)redhat.com> --- tools/testing/selftests/bpf/prog_tests/uprobe_autoattach.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/bpf/prog_tests/uprobe_autoattach.c b/tools/testing/selftests/bpf/prog_tests/uprobe_autoattach.c index d6003dc8cc99..35b87c7ba5be 100644 --- a/tools/testing/selftests/bpf/prog_tests/uprobe_autoattach.c +++ b/tools/testing/selftests/bpf/prog_tests/uprobe_autoattach.c @@ -34,7 +34,6 @@ void test_uprobe_autoattach(void) /* trigger & validate shared library u[ret]probes attached by name */ mem = malloc(malloc_sz); - free(mem); ASSERT_EQ(skel->bss->uprobe_byname_parm1, trigger_val, "check_uprobe_byname_parm1"); ASSERT_EQ(skel->bss->uprobe_byname_ran, 1, "check_uprobe_byname_ran"); @@ -44,6 +43,8 @@ void test_uprobe_autoattach(void) ASSERT_EQ(skel->bss->uprobe_byname2_ran, 3, "check_uprobe_byname2_ran"); ASSERT_EQ(skel->bss->uretprobe_byname2_rc, mem, "check_uretprobe_byname2_rc"); ASSERT_EQ(skel->bss->uretprobe_byname2_ran, 4, "check_uretprobe_byname2_ran"); + + free(mem); cleanup: test_uprobe_autoattach__destroy(skel); } -- 2.35.1

2 years

4
5
0 0

[PATCH bpf-next] selftests/bpf: fix map tests errno checks

by Artem Savkov

Switching to libbpf 1.0 API broke test_lpm_map and test_lru_map as error reporting changed. Instead of setting errno and returning -1 bpf calls now return -Exxx directly. Drop errno checks and look at return code directly. Fixes: b858ba8c52b6 ("selftests/bpf: Use libbpf 1.0 API mode instead of RLIMIT_MEMLOCK") Signed-off-by: Artem Savkov <asavkov(a)redhat.com> --- tools/testing/selftests/bpf/test_lpm_map.c | 39 +++++-------- tools/testing/selftests/bpf/test_lru_map.c | 66 ++++++++-------------- 2 files changed, 37 insertions(+), 68 deletions(-) diff --git a/tools/testing/selftests/bpf/test_lpm_map.c b/tools/testing/selftests/bpf/test_lpm_map.c index 789c9748d241..c028d621c744 100644 --- a/tools/testing/selftests/bpf/test_lpm_map.c +++ b/tools/testing/selftests/bpf/test_lpm_map.c @@ -408,16 +408,13 @@ static void test_lpm_ipaddr(void) /* Test some lookups that should not match any entry */ inet_pton(AF_INET, "10.0.0.1", key_ipv4->data); - assert(bpf_map_lookup_elem(map_fd_ipv4, key_ipv4, &value) == -1 && - errno == ENOENT); + assert(bpf_map_lookup_elem(map_fd_ipv4, key_ipv4, &value) == -ENOENT); inet_pton(AF_INET, "11.11.11.11", key_ipv4->data); - assert(bpf_map_lookup_elem(map_fd_ipv4, key_ipv4, &value) == -1 && - errno == ENOENT); + assert(bpf_map_lookup_elem(map_fd_ipv4, key_ipv4, &value) == -ENOENT); inet_pton(AF_INET6, "2a00:ffff::", key_ipv6->data); - assert(bpf_map_lookup_elem(map_fd_ipv6, key_ipv6, &value) == -1 && - errno == ENOENT); + assert(bpf_map_lookup_elem(map_fd_ipv6, key_ipv6, &value) == -ENOENT); close(map_fd_ipv4); close(map_fd_ipv6); @@ -474,18 +471,15 @@ static void test_lpm_delete(void) /* remove non-existent node */ key->prefixlen = 32; inet_pton(AF_INET, "10.0.0.1", key->data); - assert(bpf_map_lookup_elem(map_fd, key, &value) == -1 && - errno == ENOENT); + assert(bpf_map_lookup_elem(map_fd, key, &value) == -ENOENT); key->prefixlen = 30; // unused prefix so far inet_pton(AF_INET, "192.255.0.0", key->data); - assert(bpf_map_delete_elem(map_fd, key) == -1 && - errno == ENOENT); + assert(bpf_map_delete_elem(map_fd, key) == -ENOENT); key->prefixlen = 16; // same prefix as the root node inet_pton(AF_INET, "192.255.0.0", key->data); - assert(bpf_map_delete_elem(map_fd, key) == -1 && - errno == ENOENT); + assert(bpf_map_delete_elem(map_fd, key) == -ENOENT); /* assert initial lookup */ key->prefixlen = 32; @@ -530,8 +524,7 @@ static void test_lpm_delete(void) key->prefixlen = 32; inet_pton(AF_INET, "192.168.128.1", key->data); - assert(bpf_map_lookup_elem(map_fd, key, &value) == -1 && - errno == ENOENT); + assert(bpf_map_lookup_elem(map_fd, key, &value) == -ENOENT); close(map_fd); } @@ -552,8 +545,7 @@ static void test_lpm_get_next_key(void) assert(map_fd >= 0); /* empty tree. get_next_key should return ENOENT */ - assert(bpf_map_get_next_key(map_fd, NULL, key_p) == -1 && - errno == ENOENT); + assert(bpf_map_get_next_key(map_fd, NULL, key_p) == -ENOENT); /* get and verify the first key, get the second one should fail. */ key_p->prefixlen = 16; @@ -565,8 +557,7 @@ static void test_lpm_get_next_key(void) assert(key_p->prefixlen == 16 && key_p->data[0] == 192 && key_p->data[1] == 168); - assert(bpf_map_get_next_key(map_fd, key_p, next_key_p) == -1 && - errno == ENOENT); + assert(bpf_map_get_next_key(map_fd, key_p, next_key_p) == -ENOENT); /* no exact matching key should get the first one in post order. */ key_p->prefixlen = 8; @@ -590,8 +581,7 @@ static void test_lpm_get_next_key(void) next_key_p->data[1] == 168); memcpy(key_p, next_key_p, key_size); - assert(bpf_map_get_next_key(map_fd, key_p, next_key_p) == -1 && - errno == ENOENT); + assert(bpf_map_get_next_key(map_fd, key_p, next_key_p) == -ENOENT); /* Add one more element (total three) */ key_p->prefixlen = 24; @@ -614,8 +604,7 @@ static void test_lpm_get_next_key(void) next_key_p->data[1] == 168); memcpy(key_p, next_key_p, key_size); - assert(bpf_map_get_next_key(map_fd, key_p, next_key_p) == -1 && - errno == ENOENT); + assert(bpf_map_get_next_key(map_fd, key_p, next_key_p) == -ENOENT); /* Add one more element (total four) */ key_p->prefixlen = 24; @@ -643,8 +632,7 @@ static void test_lpm_get_next_key(void) next_key_p->data[1] == 168); memcpy(key_p, next_key_p, key_size); - assert(bpf_map_get_next_key(map_fd, key_p, next_key_p) == -1 && - errno == ENOENT); + assert(bpf_map_get_next_key(map_fd, key_p, next_key_p) == -ENOENT); /* Add one more element (total five) */ key_p->prefixlen = 28; @@ -678,8 +666,7 @@ static void test_lpm_get_next_key(void) next_key_p->data[1] == 168); memcpy(key_p, next_key_p, key_size); - assert(bpf_map_get_next_key(map_fd, key_p, next_key_p) == -1 && - errno == ENOENT); + assert(bpf_map_get_next_key(map_fd, key_p, next_key_p) == -ENOENT); /* no exact matching key should return the first one in post order */ key_p->prefixlen = 22; diff --git a/tools/testing/selftests/bpf/test_lru_map.c b/tools/testing/selftests/bpf/test_lru_map.c index a6aa2d121955..4d0650cfb5cd 100644 --- a/tools/testing/selftests/bpf/test_lru_map.c +++ b/tools/testing/selftests/bpf/test_lru_map.c @@ -175,24 +175,20 @@ static void test_lru_sanity0(int map_type, int map_flags) BPF_NOEXIST)); /* BPF_NOEXIST means: add new element if it doesn't exist */ - assert(bpf_map_update_elem(lru_map_fd, &key, value, BPF_NOEXIST) == -1 - /* key=1 already exists */ - && errno == EEXIST); + assert(bpf_map_update_elem(lru_map_fd, &key, value, BPF_NOEXIST) == -EEXIST); + /* key=1 already exists */ - assert(bpf_map_update_elem(lru_map_fd, &key, value, -1) == -1 && - errno == EINVAL); + assert(bpf_map_update_elem(lru_map_fd, &key, value, -1) == -EINVAL); /* insert key=2 element */ /* check that key=2 is not found */ key = 2; - assert(bpf_map_lookup_elem(lru_map_fd, &key, value) == -1 && - errno == ENOENT); + assert(bpf_map_lookup_elem(lru_map_fd, &key, value) == -ENOENT); /* BPF_EXIST means: update existing element */ - assert(bpf_map_update_elem(lru_map_fd, &key, value, BPF_EXIST) == -1 && - /* key=2 is not there */ - errno == ENOENT); + assert(bpf_map_update_elem(lru_map_fd, &key, value, BPF_EXIST) == -ENOENT); + /* key=2 is not there */ assert(!bpf_map_update_elem(lru_map_fd, &key, value, BPF_NOEXIST)); @@ -200,8 +196,7 @@ static void test_lru_sanity0(int map_type, int map_flags) /* check that key=3 is not found */ key = 3; - assert(bpf_map_lookup_elem(lru_map_fd, &key, value) == -1 && - errno == ENOENT); + assert(bpf_map_lookup_elem(lru_map_fd, &key, value) == -ENOENT); /* check that key=1 can be found and mark the ref bit to * stop LRU from removing key=1 @@ -217,8 +212,7 @@ static void test_lru_sanity0(int map_type, int map_flags) /* key=2 has been removed from the LRU */ key = 2; - assert(bpf_map_lookup_elem(lru_map_fd, &key, value) == -1 && - errno == ENOENT); + assert(bpf_map_lookup_elem(lru_map_fd, &key, value) == -ENOENT); /* lookup elem key=1 and delete it, then check it doesn't exist */ key = 1; @@ -381,8 +375,7 @@ static void test_lru_sanity2(int map_type, int map_flags, unsigned int tgt_free) end_key = 1 + batch_size; value[0] = 4321; for (key = 1; key < end_key; key++) { - assert(bpf_map_lookup_elem(lru_map_fd, &key, value) == -1 && - errno == ENOENT); + assert(bpf_map_lookup_elem(lru_map_fd, &key, value) == -ENOENT); assert(!bpf_map_update_elem(lru_map_fd, &key, value, BPF_NOEXIST)); assert(!bpf_map_lookup_elem_with_ref_bit(lru_map_fd, key, value)); @@ -562,8 +555,7 @@ static void do_test_lru_sanity5(unsigned long long last_key, int map_fd) assert(!bpf_map_lookup_elem_with_ref_bit(map_fd, key, value)); /* Cannot find the last key because it was removed by LRU */ - assert(bpf_map_lookup_elem(map_fd, &last_key, value) == -1 && - errno == ENOENT); + assert(bpf_map_lookup_elem(map_fd, &last_key, value) == -ENOENT); } /* Test map with only one element */ @@ -711,21 +703,18 @@ static void test_lru_sanity7(int map_type, int map_flags) BPF_NOEXIST)); /* BPF_NOEXIST means: add new element if it doesn't exist */ - assert(bpf_map_update_elem(lru_map_fd, &key, value, BPF_NOEXIST) == -1 - /* key=1 already exists */ - && errno == EEXIST); + assert(bpf_map_update_elem(lru_map_fd, &key, value, BPF_NOEXIST) == -EEXIST); + /* key=1 already exists */ /* insert key=2 element */ /* check that key=2 is not found */ key = 2; - assert(bpf_map_lookup_elem(lru_map_fd, &key, value) == -1 && - errno == ENOENT); + assert(bpf_map_lookup_elem(lru_map_fd, &key, value) == -ENOENT); /* BPF_EXIST means: update existing element */ - assert(bpf_map_update_elem(lru_map_fd, &key, value, BPF_EXIST) == -1 && - /* key=2 is not there */ - errno == ENOENT); + assert(bpf_map_update_elem(lru_map_fd, &key, value, BPF_EXIST) == -ENOENT); + /* key=2 is not there */ assert(!bpf_map_update_elem(lru_map_fd, &key, value, BPF_NOEXIST)); @@ -733,8 +722,7 @@ static void test_lru_sanity7(int map_type, int map_flags) /* check that key=3 is not found */ key = 3; - assert(bpf_map_lookup_elem(lru_map_fd, &key, value) == -1 && - errno == ENOENT); + assert(bpf_map_lookup_elem(lru_map_fd, &key, value) == -ENOENT); /* check that key=1 can be found and mark the ref bit to * stop LRU from removing key=1 @@ -757,8 +745,7 @@ static void test_lru_sanity7(int map_type, int map_flags) /* key=2 has been removed from the LRU */ key = 2; - assert(bpf_map_lookup_elem(lru_map_fd, &key, value) == -1 && - errno == ENOENT); + assert(bpf_map_lookup_elem(lru_map_fd, &key, value) == -ENOENT); assert(map_equal(lru_map_fd, expected_map_fd)); @@ -805,21 +792,18 @@ static void test_lru_sanity8(int map_type, int map_flags) assert(!bpf_map_update_elem(lru_map_fd, &key, value, BPF_NOEXIST)); /* BPF_NOEXIST means: add new element if it doesn't exist */ - assert(bpf_map_update_elem(lru_map_fd, &key, value, BPF_NOEXIST) == -1 - /* key=1 already exists */ - && errno == EEXIST); + assert(bpf_map_update_elem(lru_map_fd, &key, value, BPF_NOEXIST) == -EEXIST); + /* key=1 already exists */ /* insert key=2 element */ /* check that key=2 is not found */ key = 2; - assert(bpf_map_lookup_elem(lru_map_fd, &key, value) == -1 && - errno == ENOENT); + assert(bpf_map_lookup_elem(lru_map_fd, &key, value) == -ENOENT); /* BPF_EXIST means: update existing element */ - assert(bpf_map_update_elem(lru_map_fd, &key, value, BPF_EXIST) == -1 && - /* key=2 is not there */ - errno == ENOENT); + assert(bpf_map_update_elem(lru_map_fd, &key, value, BPF_EXIST) == -ENOENT); + /* key=2 is not there */ assert(!bpf_map_update_elem(lru_map_fd, &key, value, BPF_NOEXIST)); assert(!bpf_map_update_elem(expected_map_fd, &key, value, @@ -829,8 +813,7 @@ static void test_lru_sanity8(int map_type, int map_flags) /* check that key=3 is not found */ key = 3; - assert(bpf_map_lookup_elem(lru_map_fd, &key, value) == -1 && - errno == ENOENT); + assert(bpf_map_lookup_elem(lru_map_fd, &key, value) == -ENOENT); /* check that key=1 can be found and do _not_ mark ref bit. * this will be evicted on next update. @@ -853,8 +836,7 @@ static void test_lru_sanity8(int map_type, int map_flags) /* key=1 has been removed from the LRU */ key = 1; - assert(bpf_map_lookup_elem(lru_map_fd, &key, value) == -1 && - errno == ENOENT); + assert(bpf_map_lookup_elem(lru_map_fd, &key, value) == -ENOENT); assert(map_equal(lru_map_fd, expected_map_fd)); -- 2.35.1

2 years

3
2
0 0

[PATCH bpf-next] selftests/bpf: fix attach tests retcode checks

by Artem Savkov

Switching to libbpf 1.0 API broke test_sock and test_sysctl as they check for return of bpf_prog_attach to be exactly -1. Switch the check to '< 0' instead. Fixes: b858ba8c52b6 ("selftests/bpf: Use libbpf 1.0 API mode instead of RLIMIT_MEMLOCK") Signed-off-by: Artem Savkov <asavkov(a)redhat.com> --- tools/testing/selftests/bpf/test_sock.c | 2 +- tools/testing/selftests/bpf/test_sysctl.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/bpf/test_sock.c b/tools/testing/selftests/bpf/test_sock.c index 6c4494076bbf..810c3740b2cc 100644 --- a/tools/testing/selftests/bpf/test_sock.c +++ b/tools/testing/selftests/bpf/test_sock.c @@ -492,7 +492,7 @@ static int run_test_case(int cgfd, const struct sock_test *test) goto err; } - if (attach_sock_prog(cgfd, progfd, test->attach_type) == -1) { + if (attach_sock_prog(cgfd, progfd, test->attach_type) < 0) { if (test->result == ATTACH_REJECT) goto out; else diff --git a/tools/testing/selftests/bpf/test_sysctl.c b/tools/testing/selftests/bpf/test_sysctl.c index 5bae25ca19fb..57620e7c9048 100644 --- a/tools/testing/selftests/bpf/test_sysctl.c +++ b/tools/testing/selftests/bpf/test_sysctl.c @@ -1560,7 +1560,7 @@ static int run_test_case(int cgfd, struct sysctl_test *test) goto err; } - if (bpf_prog_attach(progfd, cgfd, atype, BPF_F_ALLOW_OVERRIDE) == -1) { + if (bpf_prog_attach(progfd, cgfd, atype, BPF_F_ALLOW_OVERRIDE) < 0) { if (test->result == ATTACH_REJECT) goto out; else -- 2.35.1

2 years

3
2
0 0

[PATCH] selftests: alsa: Start validating control names

by Mark Brown

Not much of a test but we keep on getting problems with boolean controls not being called Switches so let's add a few basic checks to help people spot problems. Signed-off-by: Mark Brown <broonie(a)kernel.org> --- tools/testing/selftests/alsa/mixer-test.c | 41 ++++++++++++++++++++++- 1 file changed, 40 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/alsa/mixer-test.c b/tools/testing/selftests/alsa/mixer-test.c index eb2213540fe3..b747dbc023ab 100644 --- a/tools/testing/selftests/alsa/mixer-test.c +++ b/tools/testing/selftests/alsa/mixer-test.c @@ -27,7 +27,7 @@ #include "../kselftest.h" -#define TESTS_PER_CONTROL 6 +#define TESTS_PER_CONTROL 7 struct card_data { snd_ctl_t *handle; @@ -456,6 +456,44 @@ static void test_ctl_get_value(struct ctl_data *ctl) ctl->card->card, ctl->elem); } +bool strend(const char *haystack, const char *needle) +{ + size_t haystack_len = strlen(haystack); + size_t needle_len = strlen(needle); + + if (needle_len > haystack_len) + return false; + return strcmp(haystack + haystack_len - needle_len, needle) == 0; +} + +static void test_ctl_name(struct ctl_data *ctl) +{ + bool name_ok = true; + bool check; + + /* Only boolean controls should end in Switch */ + if (strend(ctl->name, "Switch")) { + if (snd_ctl_elem_info_get_type(ctl->info) != SND_CTL_ELEM_TYPE_BOOLEAN) { + ksft_print_msg("%d.%d %s ends in Switch but is not boolean\n", + ctl->card->card, ctl->elem, ctl->name); + name_ok = false; + } + } + + /* Writeable boolean controls should end in Switch */ + if (snd_ctl_elem_info_get_type(ctl->info) == SND_CTL_ELEM_TYPE_BOOLEAN && + snd_ctl_elem_info_is_writable(ctl->info)) { + if (!strend(ctl->name, "Switch")) { + ksft_print_msg("%d.%d %s is a writeable boolean but not a Switch\n", + ctl->card->card, ctl->elem, ctl->name); + name_ok = false; + } + } + + ksft_test_result(name_ok, "name.%d.%d\n", + ctl->card->card, ctl->elem); +} + static bool show_mismatch(struct ctl_data *ctl, int index, snd_ctl_elem_value_t *read_val, snd_ctl_elem_value_t *expected_val) @@ -1062,6 +1100,7 @@ int main(void) * test stores the default value for later cleanup. */ test_ctl_get_value(ctl); + test_ctl_name(ctl); test_ctl_write_default(ctl); test_ctl_write_valid(ctl); test_ctl_write_invalid(ctl); -- 2.30.2

2 years

2
2
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror April 2022