August 2022 - Linux-kselftest-mirror

[PATCH v2 0/3] arm64/sve: Document our actual SVE syscall ABI

by Mark Brown

Currently our SVE syscall ABI documentation does not reflect the actual implemented ABI, it says that register state not shared with FPSIMD becomes undefined on syscall when in reality we always clear it. Since changing this would cause a change in the observed kernel behaviour there is a substantial desire to avoid taking advantage of the documented ABI so instead let's document what we actually do so it's clear that it is in reality an ABI. There has been some pushback on tightening the documentation in the past but it is hard to see who that helps, it makes the implementation decisions less clear and makes it harder for people to discover and make use of the actual ABI. The main practical concern is that qemu's user mode does not currently flush the registers. v2: - Rebase onto v6.0-rc1. Mark Brown (3): kselftest/arm64: Correct buffer allocation for SVE Z registers arm64/sve: Document our actual ABI for clearing registers on syscall kselftest/arm64: Enforce actual ABI for SVE syscalls Documentation/arm64/sve.rst | 2 +- .../testing/selftests/arm64/abi/syscall-abi.c | 61 ++++++++++++------- 2 files changed, 41 insertions(+), 22 deletions(-) base-commit: 568035b01cfb107af8d2e4bd2fb9aea22cf5b868 -- 2.30.2

2 years, 4 months

1
3
0 0

[PATCH v1] kselftest/arm64: Add simple hwcap validation

by Mark Brown

Add some trivial hwcap validation which checks that /proc/cpuinfo and AT_HWCAP agree with each other and can verify that for extensions that can generate a SIGILL due to adding new instructions one appears or doesn't appear as expected. I've added SVE and SME, other capabilities can be added later if this gets merged. This isn't super exciting but on the other hand took very little time to write and should be handy when verifying that you wired up AT_HWCAP properly. Signed-off-by: Mark Brown <broonie(a)kernel.org> --- tools/testing/selftests/arm64/abi/.gitignore | 1 + tools/testing/selftests/arm64/abi/Makefile | 2 +- tools/testing/selftests/arm64/abi/hwcap.c | 188 +++++++++++++++++++ 3 files changed, 190 insertions(+), 1 deletion(-) create mode 100644 tools/testing/selftests/arm64/abi/hwcap.c diff --git a/tools/testing/selftests/arm64/abi/.gitignore b/tools/testing/selftests/arm64/abi/.gitignore index b9e54417250d..c31d34d48a30 100644 --- a/tools/testing/selftests/arm64/abi/.gitignore +++ b/tools/testing/selftests/arm64/abi/.gitignore @@ -1,2 +1,3 @@ +hwcap syscall-abi tpidr2 diff --git a/tools/testing/selftests/arm64/abi/Makefile b/tools/testing/selftests/arm64/abi/Makefile index c8d7f2495eb2..e60752eb8334 100644 --- a/tools/testing/selftests/arm64/abi/Makefile +++ b/tools/testing/selftests/arm64/abi/Makefile @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 # Copyright (C) 2021 ARM Limited -TEST_GEN_PROGS := syscall-abi tpidr2 +TEST_GEN_PROGS := hwcap syscall-abi tpidr2 include ../../lib.mk diff --git a/tools/testing/selftests/arm64/abi/hwcap.c b/tools/testing/selftests/arm64/abi/hwcap.c new file mode 100644 index 000000000000..8b5c646cea63 --- /dev/null +++ b/tools/testing/selftests/arm64/abi/hwcap.c @@ -0,0 +1,188 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2022 ARM Limited. + */ + +#include <errno.h> +#include <signal.h> +#include <stdbool.h> +#include <stddef.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <unistd.h> +#include <sys/auxv.h> +#include <sys/prctl.h> +#include <asm/hwcap.h> +#include <asm/sigcontext.h> +#include <asm/unistd.h> + +#include "../../kselftest.h" + +#define TESTS_PER_HWCAP 2 + +/* + * Function expected to generate SIGILL when the feature is not + * supported and return when it is supported. If SIGILL is generated + * then the handler must be able to skip over the instruction safely. + * + * Note that it is expected that for many architecture extensions + * there are no specific traps due to no architecture state being + * added so we may not fault if running on a kernel which doesn't know + * to add the hwcap. + */ +typedef void (*sigill_fn)(void); + +static void sme_sigill(void) +{ + /* RDSVL x0, #0 */ + asm volatile(".inst 0x04bf5800" : : : "x0"); +} + +static void sve_sigill(void) +{ + /* RDVL x0, #0 */ + asm volatile(".inst 0x04bf5000" : : : "x0"); +} + +static const struct hwcap_data { + const char *name; + unsigned long at_hwcap; + unsigned long hwcap_bit; + const char *cpuinfo; + sigill_fn sigill_fn; + bool sigill_reliable; +} hwcaps[] = { + { + .name = "SME", + .at_hwcap = AT_HWCAP2, + .hwcap_bit = HWCAP2_SME, + .cpuinfo = "sme", + .sigill_fn = sme_sigill, + .sigill_reliable = true, + }, + { + .name = "SVE", + .at_hwcap = AT_HWCAP, + .hwcap_bit = HWCAP_SVE, + .cpuinfo = "sve", + .sigill_fn = sve_sigill, + .sigill_reliable = true, + }, +}; + +static bool seen_sigill; + +static void handle_sigill(int sig, siginfo_t *info, void *context) +{ + ucontext_t *uc = context; + + seen_sigill = true; + + /* Skip over the offending instruction */ + uc->uc_mcontext.pc += 4; +} + +bool cpuinfo_present(const char *name) +{ + FILE *f; + char buf[2048], name_space[30], name_newline[30]; + char *s; + + /* + * The feature should appear with a leading space and either a + * trailing space or a newline. + */ + snprintf(name_space, sizeof(name_space), " %s ", name); + snprintf(name_newline, sizeof(name_newline), " %s\n", name); + + f = fopen("/proc/cpuinfo", "r"); + if (!f) { + ksft_print_msg("Failed to open /proc/cpuinfo\n"); + return false; + } + + while (fgets(buf, sizeof(buf), f)) { + /* Features: line? */ + if (strncmp(buf, "Features\t:", strlen("Features\t:")) != 0) + continue; + + /* All CPUs should be symmetric, don't read any more */ + fclose(f); + + s = strstr(buf, name_space); + if (s) + return true; + s = strstr(buf, name_newline); + if (s) + return true; + + return false; + } + + ksft_print_msg("Failed to find Features in /proc/cpuinfo\n"); + fclose(f); + return false; +} + +int main(void) +{ + const struct hwcap_data *hwcap; + int i, ret; + bool have_cpuinfo, have_hwcap; + struct sigaction sa; + + ksft_print_header(); + ksft_set_plan(ARRAY_SIZE(hwcaps) * TESTS_PER_HWCAP); + + memset(&sa, 0, sizeof(sa)); + sa.sa_sigaction = handle_sigill; + sa.sa_flags = SA_RESTART | SA_SIGINFO; + sigemptyset(&sa.sa_mask); + ret = sigaction(SIGILL, &sa, NULL); + if (ret < 0) + ksft_exit_fail_msg("Failed to install SIGILL handler: %s (%d)\n", + strerror(errno), errno); + + for (i = 0; i < ARRAY_SIZE(hwcaps); i++) { + hwcap = &hwcaps[i]; + + have_hwcap = getauxval(hwcaps->at_hwcap) & hwcap->hwcap_bit; + have_cpuinfo = cpuinfo_present(hwcap->cpuinfo); + + if (have_hwcap) + ksft_print_msg("%s present", hwcap->name); + + ksft_test_result(have_hwcap == have_cpuinfo, + "cpuinfo_match_%s\n", hwcap->name); + + if (hwcap->sigill_fn) { + seen_sigill = false; + hwcap->sigill_fn(); + + if (have_hwcap) { + /* Should be able to use the extension */ + ksft_test_result(!seen_sigill, "sigill_%s\n", + hwcap->name); + } else if (hwcap->sigill_reliable) { + /* Guaranteed a SIGILL */ + ksft_test_result(seen_sigill, "sigill_%s\n", + hwcap->name); + } else { + /* Missing SIGILL might be fine */ + ksft_print_msg("SIGILL %sreported for %s\n", + seen_sigill ? "" : "not ", + hwcap->name); + ksft_test_result_skip("sigill_%s\n", + hwcap->name); + } + } else { + ksft_test_result_skip("sigill_%s\n", + hwcap->name); + } + } + + ksft_print_cnts(); + + return 0; +} base-commit: 568035b01cfb107af8d2e4bd2fb9aea22cf5b868 -- 2.30.2

2 years, 4 months

1
0
0 0

[PATCH v1 0/4] kselftest/arm64: Floating point stress test harness

by Mark Brown

This series has a few small enhancements for the existing standalone floating point stress tests and then builds on those with a kselftest integrated program which gives those a very quick spin from within kselftest, as well as having an option to set a custom timeout to allow for use with longer soak testing. This makes it much easier to get thorough testing of the floating point state management logic, rather than requiring custom setup for coverage of the various vector lengths in the system as is needed at present. It might be nice in future to extend this to attach to some or all of the test programs with ptrace and read/write their registers as another means of potentially triggering race conditions or corruption but that's definitely another step. This series has a runtime dependency on a fix "arm64/signal: Raise limit on stack frames" which has previously been posted separately, without this fix spurious failures will be seen on systems supporting large SME vector lengths. Mark Brown (4): kselftest/arm64: Always encourage preemption for za-test kselftest/arm64: Count SIGUSR2 deliveries in FP stress tests kselftest/arm64: Install signal handlers before output in FP stress tests kselftest/arm64: kselftest harness for FP stress tests tools/testing/selftests/arm64/fp/.gitignore | 1 + tools/testing/selftests/arm64/fp/Makefile | 5 +- .../testing/selftests/arm64/fp/asm-offsets.h | 1 + tools/testing/selftests/arm64/fp/fp-stress.c | 532 ++++++++++++++++++ .../testing/selftests/arm64/fp/fpsimd-test.S | 51 +- tools/testing/selftests/arm64/fp/sve-test.S | 51 +- tools/testing/selftests/arm64/fp/za-test.S | 58 +- 7 files changed, 638 insertions(+), 61 deletions(-) create mode 100644 tools/testing/selftests/arm64/fp/fp-stress.c base-commit: 568035b01cfb107af8d2e4bd2fb9aea22cf5b868 -- 2.30.2

2 years, 4 months

1
4
0 0

lkft kselftest for next-20220815

by lkft＠linaro.org

## Build * kernel: 5.19.0 * git: https://gitlab.com/Linaro/lkft/mirrors/next/linux-next * git branch: master * git commit: fa96acf505e0e5f4774e273d97cee65fffcf53e6 * git describe: next-20220815 * test details: https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20220815 ## Test Regressions (compared to next-20220812) No test regressions found. ## Metric Regressions (compared to next-20220812) No metric regressions found. Tested-by: Linux Kernel Functional Testing <lkft(a)linaro.org> ## Test Fixes (compared to next-20220812) No test fixes found. ## Metric Fixes (compared to next-20220812) No metric fixes found. ## Test result summary total: 0, pass: 0, fail: 0, skip: 0, xfail: 0 ## Build Summary ## Test suites summary -- Linaro LKFT https://lkft.linaro.org

2 years, 4 months

1
0
0 0

[PATCH] selftests/vm: enable running select groups of tests

by Joel Savitz

Add the ability to run one or more groups of vm tests (specified by the environment variable TEST_ITEMS). Preserve existing default behavior of running all tests when TEST_ITEMS is empty or "default". Documentation of test groups is included in the patch as follows: # ./run_vmtests.sh [ -h || --help ] usage: ./tools/testing/selftests/vm/run_vmtests.sh [ -h ] -h: display this message The default behavior is to run all tests. Alternatively, specific groups tests can be run by defining the TEST_ITEMS shell variable with a space-separated string of one or more of the following: - mmap tests for mmap(2) - gup_test tests for gup using gup_test interface - userfaultfd tests for userfaultfd(2) - compaction a test for the patch "Allow compaction of unevictable pages" - mlock tests for mlock(2) - mremap tests for mremap(2) - hugevm tests for very large virtual address space - vmalloc vmalloc smoke tests - hmm hmm smoke tests - madv_populate test memadvise(2) MADV_POPULATE_{READ,WRITE} options - memfd_secret test memfd_secret(2) - process_mrelease test process_mrelease(2) - ksm ksm tests that do not require >=2 NUMA nodes - ksm_numa ksm tests that require >=2 NUMA nodes example: TEST_ITEMS="hmm mmap ksm" ./run_vmtests.sh Signed-off-by: Joel Savitz <jsavitz(a)redhat.com> --- tools/testing/selftests/vm/run_vmtests.sh | 224 +++++++++++++++------- 1 file changed, 150 insertions(+), 74 deletions(-) diff --git a/tools/testing/selftests/vm/run_vmtests.sh b/tools/testing/selftests/vm/run_vmtests.sh index 41fce8bea929..d31fc66205f8 100755 --- a/tools/testing/selftests/vm/run_vmtests.sh +++ b/tools/testing/selftests/vm/run_vmtests.sh @@ -1,22 +1,74 @@ #!/bin/bash # SPDX-License-Identifier: GPL-2.0 -#please run as root +# Please run as root # Kselftest framework requirement - SKIP code is 4. ksft_skip=4 mnt=./huge exitcode=0 - -#get huge pagesize and freepages from /proc/meminfo -while read -r name size unit; do - if [ "$name" = "HugePages_Free:" ]; then - freepgs="$size" - fi - if [ "$name" = "Hugepagesize:" ]; then - hpgsize_KB="$size" +nr_tests_ran=0 + +if [ ${1:-0} == "-h" ] || [ ${1:-0} == "--help" ] +then + cat <<EOF +usage: ${BASH_SOURCE[0]:-$0} [ -h ] + -h: display this message + +The default behavior is to run all tests. + +Alternatively, specific groups tests can be run by defining +the TEST_ITEMS shell variable with a space-separated string +of one or more of the following: +- mmap + tests for mmap(2) +- gup_test + tests for gup using gup_test interface +- userfaultfd + tests for userfaultfd(2) +- compaction + a test for the patch "Allow compaction of unevictable pages" +- mlock + tests for mlock(2) +- mremap + tests for mremap(2) +- hugevm + tests for very large virtual address space +- vmalloc + vmalloc smoke tests +- hmm + hmm smoke tests +- madv_populate + test memadvise(2) MADV_POPULATE_{READ,WRITE} options +- memfd_secret + test memfd_secret(2) +- process_mrelease + test process_mrelease(2) +- ksm + ksm tests that do not require >=2 NUMA nodes +- ksm_numa + ksm tests that require >=2 NUMA nodes +example: TEST_ITEMS="hmm mmap ksm" ./run_vmtests.sh +EOF + exit 0 +fi # $1 == -h || $1 == --help + +# default behavior: run all tests +TEST_ITEMS=${TEST_ITEMS:-default} + +echo "Selected test items: ${TEST_ITEMS}" + +test_selected() { + if [ "$TEST_ITEMS" == "default" ]; then + # If no TEST_ITEMS are specified, run all tests + return 0 fi -done < /proc/meminfo + echo ${TEST_ITEMS} | grep ${1} 2>&1 >/dev/null + return ${?} +} + +# Hugepage setup only needed for hugetlb tests +if test_selected "hugetlb"; then # Simple hugetlbfs tests have a hardcoded minimum requirement of # huge pages totaling 256MB (262144KB) in size. The userfaultfd @@ -28,7 +80,17 @@ hpgsize_MB=$((hpgsize_KB / 1024)) half_ufd_size_MB=$((((nr_cpus * hpgsize_MB + 127) / 128) * 128)) needmem_KB=$((half_ufd_size_MB * 2 * 1024)) -#set proper nr_hugepages +# get huge pagesize and freepages from /proc/meminfo +while read -r name size unit; do + if [ "$name" = "HugePages_Free:" ]; then + freepgs="$size" + fi + if [ "$name" = "Hugepagesize:" ]; then + hpgsize_KB="$size" + fi +done < /proc/meminfo + +# set proper nr_hugepages if [ -n "$freepgs" ] && [ -n "$hpgsize_KB" ]; then nr_hugepgs=$(cat /proc/sys/vm/nr_hugepages) needpgs=$((needmem_KB / hpgsize_KB)) @@ -57,126 +119,140 @@ else exit 1 fi -#filter 64bit architectures +fi # test_selected "hugetlb" + +# filter 64bit architectures ARCH64STR="arm64 ia64 mips64 parisc64 ppc64 ppc64le riscv64 s390x sh64 sparc64 x86_64" if [ -z "$ARCH" ]; then ARCH=$(uname -m 2>/dev/null | sed -e 's/aarch64.*/arm64/') fi VADDR64=0 -echo "$ARCH64STR" | grep "$ARCH" && VADDR64=1 +echo "$ARCH64STR" | grep "$ARCH" &>/dev/null && VADDR64=1 # Usage: run_test [test binary] [arbitrary test arguments...] run_test() { - local title="running $*" - local sep=$(echo -n "$title" | tr "[:graph:][:space:]" -) - printf "%s\n%s\n%s\n" "$sep" "$title" "$sep" - - "$@" - local ret=$? - if [ $ret -eq 0 ]; then - echo "[PASS]" - elif [ $ret -eq $ksft_skip ]; then - echo "[SKIP]" - exitcode=$ksft_skip - else - echo "[FAIL]" - exitcode=1 - fi + if test_selected ${CATEGORY}; then + local title="running $*" + local sep=$(echo -n "$title" | tr "[:graph:][:space:]" -) + printf "%s\n%s\n%s\n" "$sep" "$title" "$sep" + + "$@" + local ret=$? + if [ $ret -eq 0 ]; then + echo "[PASS]" + elif [ $ret -eq $ksft_skip ]; then + echo "[SKIP]" + exitcode=$ksft_skip + else + echo "[FAIL]" + exitcode=1 + fi + nr_tests_ran=$((nr_tests_ran + 1)) + fi # test_selected } -mkdir "$mnt" -mount -t hugetlbfs none "$mnt" +# setup only needed for hugetlb tests +if test_selected "hugetlb"; then + mkdir "$mnt" + mount -t hugetlbfs none "$mnt" +fi -run_test ./hugepage-mmap +CATEGORY="hugetlb" run_test ./hugepage-mmap shmmax=$(cat /proc/sys/kernel/shmmax) shmall=$(cat /proc/sys/kernel/shmall) echo 268435456 > /proc/sys/kernel/shmmax echo 4194304 > /proc/sys/kernel/shmall -run_test ./hugepage-shm +CATEGORY="hugetlb" run_test ./hugepage-shm echo "$shmmax" > /proc/sys/kernel/shmmax echo "$shmall" > /proc/sys/kernel/shmall -run_test ./map_hugetlb +CATEGORY="hugetlb" run_test ./map_hugetlb -run_test ./hugepage-mremap "$mnt"/huge_mremap -rm -f "$mnt"/huge_mremap +CATEGORY="hugetlb" run_test ./hugepage-mremap "$mnt"/huge_mremap +test_selected "hugetlb" && rm -f "$mnt"/huge_mremap -run_test ./hugepage-vmemmap +CATEGORY="hugetlb" run_test ./hugepage-vmemmap -run_test ./hugetlb-madvise "$mnt"/madvise-test -rm -f "$mnt"/madvise-test +CATEGORY="hugetlb" run_test ./hugetlb-madvise "$mnt"/madvise-test +test_selected "hugetlb" && rm -f "$mnt"/madvise-test -echo "NOTE: The above hugetlb tests provide minimal coverage. Use" -echo " https://github.com/libhugetlbfs/libhugetlbfs.git for" -echo " hugetlb regression testing." +if test_selected "hugetlb"; then + echo "NOTE: These hugetlb tests provide minimal coverage. Use" + echo " https://github.com/libhugetlbfs/libhugetlbfs.git for" + echo " hugetlb regression testing." +fi -run_test ./map_fixed_noreplace +CATEGORY="mmap" run_test ./map_fixed_noreplace # get_user_pages_fast() benchmark -run_test ./gup_test -u +CATEGORY="gup_test" run_test ./gup_test -u # pin_user_pages_fast() benchmark -run_test ./gup_test -a +CATEGORY="gup_test" run_test ./gup_test -a # Dump pages 0, 19, and 4096, using pin_user_pages: -run_test ./gup_test -ct -F 0x1 0 19 0x1000 +CATEGORY="gup_test" run_test ./gup_test -ct -F 0x1 0 19 0x1000 -run_test ./userfaultfd anon 20 16 +CATEGORY="userfaultfd" run_test ./userfaultfd anon 20 16 # Test requires source and destination huge pages. Size of source # (half_ufd_size_MB) is passed as argument to test. -run_test ./userfaultfd hugetlb "$half_ufd_size_MB" 32 -run_test ./userfaultfd shmem 20 16 - -#cleanup -umount "$mnt" -rm -rf "$mnt" -echo "$nr_hugepgs" > /proc/sys/vm/nr_hugepages +CATEGORY="userfaultfd" run_test ./userfaultfd hugetlb "$half_ufd_size_MB" 32 +CATEGORY="userfaultfd" run_test ./userfaultfd shmem 20 16 + +# cleanup (only needed when running hugetlb tests) +if test_selected "hugetlb"; then + umount "$mnt" + rm -rf "$mnt" + echo "$nr_hugepgs" > /proc/sys/vm/nr_hugepages +fi -run_test ./compaction_test +CATEGORY="compaction" run_test ./compaction_test -run_test sudo -u nobody ./on-fault-limit +CATEGORY="mlock" run_test sudo -u nobody ./on-fault-limit -run_test ./map_populate +CATEGORY="mmap" run_test ./map_populate -run_test ./mlock-random-test +CATEGORY="mlock" run_test ./mlock-random-test -run_test ./mlock2-tests +CATEGORY="mlock" run_test ./mlock2-tests -run_test ./mrelease_test +CATEGORY="process_mrelease" run_test ./mrelease_test -run_test ./mremap_test +CATEGORY="mremap" run_test ./mremap_test -run_test ./thuge-gen +CATEGORY="hugetlb" run_test ./thuge-gen if [ $VADDR64 -ne 0 ]; then - run_test ./virtual_address_range + CATEGORY="hugevm" run_test ./virtual_address_range # virtual address 128TB switch test - run_test ./va_128TBswitch + CATEGORY="hugevm" run_test ./va_128TBswitch fi # VADDR64 # vmalloc stability smoke test -run_test ./test_vmalloc.sh smoke +CATEGORY="vmalloc" run_test ./test_vmalloc.sh smoke -run_test ./mremap_dontunmap +CATEGORY="mremap" run_test ./mremap_dontunmap -run_test ./test_hmm.sh smoke +CATEGORY="hmm" run_test ./test_hmm.sh smoke # MADV_POPULATE_READ and MADV_POPULATE_WRITE tests -run_test ./madv_populate +CATEGORY="madv_populate" run_test ./madv_populate -run_test ./memfd_secret +CATEGORY="memfd_secret" run_test ./memfd_secret # KSM MADV_MERGEABLE test with 10 identical pages -run_test ./ksm_tests -M -p 10 +CATEGORY="ksm" run_test ./ksm_tests -M -p 10 # KSM unmerge test -run_test ./ksm_tests -U +CATEGORY="ksm" run_test ./ksm_tests -U # KSM test with 10 zero pages and use_zero_pages = 0 -run_test ./ksm_tests -Z -p 10 -z 0 +CATEGORY="ksm" run_test ./ksm_tests -Z -p 10 -z 0 # KSM test with 10 zero pages and use_zero_pages = 1 -run_test ./ksm_tests -Z -p 10 -z 1 +CATEGORY="ksm" run_test ./ksm_tests -Z -p 10 -z 1 # KSM test with 2 NUMA nodes and merge_across_nodes = 1 -run_test ./ksm_tests -N -m 1 +CATEGORY="ksm_numa" run_test ./ksm_tests -N -m 1 # KSM test with 2 NUMA nodes and merge_across_nodes = 0 -run_test ./ksm_tests -N -m 0 +CATEGORY="ksm_numa" run_test ./ksm_tests -N -m 0 + +echo "Ran $nr_tests_ran tests" exit $exitcode -- 2.31.1

2 years, 4 months

3
6
0 0

[PATCH AUTOSEL 5.4 15/21] selftests/kprobe: Do not test for GRP/ without event failures

by Sasha Levin

From: "Steven Rostedt (Google)" <rostedt(a)goodmis.org> [ Upstream commit f5eab65ff2b76449286d18efc7fee3e0b72f7d9b ] A new feature is added where kprobes (and other probes) do not need to explicitly state the event name when creating a probe. The event name will come from what is being attached. That is: # echo 'p:foo/ vfs_read' > kprobe_events Will no longer error, but instead create an event: # cat kprobe_events p:foo/p_vfs_read_0 vfs_read This should not be tested as an error case anymore. Remove it from the selftest as now this feature "breaks" the selftest as it no longer fails as expected. Link: https://lore.kernel.org/all/1656296348-16111-1-git-send-email-quic_linyyuan… Link: https://lkml.kernel.org/r/20220712161707.6dc08a14@gandalf.local.home Signed-off-by: Steven Rostedt (Google) <rostedt(a)goodmis.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- .../selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc | 1 - 1 file changed, 1 deletion(-) diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc index ef1e9bafb098..728c2762ee58 100644 --- a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc +++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc @@ -24,7 +24,6 @@ check_error 'p:^/bar vfs_read' # NO_GROUP_NAME check_error 'p:^12345678901234567890123456789012345678901234567890123456789012345/bar vfs_read' # GROUP_TOO_LONG check_error 'p:^foo.1/bar vfs_read' # BAD_GROUP_NAME -check_error 'p:foo/^ vfs_read' # NO_EVENT_NAME check_error 'p:foo/^12345678901234567890123456789012345678901234567890123456789012345 vfs_read' # EVENT_TOO_LONG check_error 'p:foo/^bar.1 vfs_read' # BAD_EVENT_NAME -- 2.35.1

2 years, 4 months

1
0
0 0

[PATCH AUTOSEL 5.10 24/31] selftests/kprobe: Do not test for GRP/ without event failures

by Sasha Levin

From: "Steven Rostedt (Google)" <rostedt(a)goodmis.org> [ Upstream commit f5eab65ff2b76449286d18efc7fee3e0b72f7d9b ] A new feature is added where kprobes (and other probes) do not need to explicitly state the event name when creating a probe. The event name will come from what is being attached. That is: # echo 'p:foo/ vfs_read' > kprobe_events Will no longer error, but instead create an event: # cat kprobe_events p:foo/p_vfs_read_0 vfs_read This should not be tested as an error case anymore. Remove it from the selftest as now this feature "breaks" the selftest as it no longer fails as expected. Link: https://lore.kernel.org/all/1656296348-16111-1-git-send-email-quic_linyyuan… Link: https://lkml.kernel.org/r/20220712161707.6dc08a14@gandalf.local.home Signed-off-by: Steven Rostedt (Google) <rostedt(a)goodmis.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- .../selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc | 1 - 1 file changed, 1 deletion(-) diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc index fa928b431555..7c02509c71d0 100644 --- a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc +++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc @@ -21,7 +21,6 @@ check_error 'p:^/bar vfs_read' # NO_GROUP_NAME check_error 'p:^12345678901234567890123456789012345678901234567890123456789012345/bar vfs_read' # GROUP_TOO_LONG check_error 'p:^foo.1/bar vfs_read' # BAD_GROUP_NAME -check_error 'p:foo/^ vfs_read' # NO_EVENT_NAME check_error 'p:foo/^12345678901234567890123456789012345678901234567890123456789012345 vfs_read' # EVENT_TOO_LONG check_error 'p:foo/^bar.1 vfs_read' # BAD_EVENT_NAME -- 2.35.1

2 years, 4 months

1
0
0 0

[PATCH AUTOSEL 5.15 36/46] selftests/kprobe: Do not test for GRP/ without event failures

by Sasha Levin

From: "Steven Rostedt (Google)" <rostedt(a)goodmis.org> [ Upstream commit f5eab65ff2b76449286d18efc7fee3e0b72f7d9b ] A new feature is added where kprobes (and other probes) do not need to explicitly state the event name when creating a probe. The event name will come from what is being attached. That is: # echo 'p:foo/ vfs_read' > kprobe_events Will no longer error, but instead create an event: # cat kprobe_events p:foo/p_vfs_read_0 vfs_read This should not be tested as an error case anymore. Remove it from the selftest as now this feature "breaks" the selftest as it no longer fails as expected. Link: https://lore.kernel.org/all/1656296348-16111-1-git-send-email-quic_linyyuan… Link: https://lkml.kernel.org/r/20220712161707.6dc08a14@gandalf.local.home Signed-off-by: Steven Rostedt (Google) <rostedt(a)goodmis.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- .../selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc | 1 - 1 file changed, 1 deletion(-) diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc index fa928b431555..7c02509c71d0 100644 --- a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc +++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc @@ -21,7 +21,6 @@ check_error 'p:^/bar vfs_read' # NO_GROUP_NAME check_error 'p:^12345678901234567890123456789012345678901234567890123456789012345/bar vfs_read' # GROUP_TOO_LONG check_error 'p:^foo.1/bar vfs_read' # BAD_GROUP_NAME -check_error 'p:foo/^ vfs_read' # NO_EVENT_NAME check_error 'p:foo/^12345678901234567890123456789012345678901234567890123456789012345 vfs_read' # EVENT_TOO_LONG check_error 'p:foo/^bar.1 vfs_read' # BAD_EVENT_NAME -- 2.35.1

2 years, 4 months

1
0
0 0

[PATCH AUTOSEL 5.18 44/56] selftests/kprobe: Do not test for GRP/ without event failures

by Sasha Levin

From: "Steven Rostedt (Google)" <rostedt(a)goodmis.org> [ Upstream commit f5eab65ff2b76449286d18efc7fee3e0b72f7d9b ] A new feature is added where kprobes (and other probes) do not need to explicitly state the event name when creating a probe. The event name will come from what is being attached. That is: # echo 'p:foo/ vfs_read' > kprobe_events Will no longer error, but instead create an event: # cat kprobe_events p:foo/p_vfs_read_0 vfs_read This should not be tested as an error case anymore. Remove it from the selftest as now this feature "breaks" the selftest as it no longer fails as expected. Link: https://lore.kernel.org/all/1656296348-16111-1-git-send-email-quic_linyyuan… Link: https://lkml.kernel.org/r/20220712161707.6dc08a14@gandalf.local.home Signed-off-by: Steven Rostedt (Google) <rostedt(a)goodmis.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- .../selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc | 1 - 1 file changed, 1 deletion(-) diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc index fa928b431555..7c02509c71d0 100644 --- a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc +++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc @@ -21,7 +21,6 @@ check_error 'p:^/bar vfs_read' # NO_GROUP_NAME check_error 'p:^12345678901234567890123456789012345678901234567890123456789012345/bar vfs_read' # GROUP_TOO_LONG check_error 'p:^foo.1/bar vfs_read' # BAD_GROUP_NAME -check_error 'p:foo/^ vfs_read' # NO_EVENT_NAME check_error 'p:foo/^12345678901234567890123456789012345678901234567890123456789012345 vfs_read' # EVENT_TOO_LONG check_error 'p:foo/^bar.1 vfs_read' # BAD_EVENT_NAME -- 2.35.1

2 years, 4 months

1
0
0 0

[PATCH AUTOSEL 5.19 50/64] selftests/kprobe: Do not test for GRP/ without event failures

by Sasha Levin

From: "Steven Rostedt (Google)" <rostedt(a)goodmis.org> [ Upstream commit f5eab65ff2b76449286d18efc7fee3e0b72f7d9b ] A new feature is added where kprobes (and other probes) do not need to explicitly state the event name when creating a probe. The event name will come from what is being attached. That is: # echo 'p:foo/ vfs_read' > kprobe_events Will no longer error, but instead create an event: # cat kprobe_events p:foo/p_vfs_read_0 vfs_read This should not be tested as an error case anymore. Remove it from the selftest as now this feature "breaks" the selftest as it no longer fails as expected. Link: https://lore.kernel.org/all/1656296348-16111-1-git-send-email-quic_linyyuan… Link: https://lkml.kernel.org/r/20220712161707.6dc08a14@gandalf.local.home Signed-off-by: Steven Rostedt (Google) <rostedt(a)goodmis.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- .../selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc | 1 - 1 file changed, 1 deletion(-) diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc index fa928b431555..7c02509c71d0 100644 --- a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc +++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc @@ -21,7 +21,6 @@ check_error 'p:^/bar vfs_read' # NO_GROUP_NAME check_error 'p:^12345678901234567890123456789012345678901234567890123456789012345/bar vfs_read' # GROUP_TOO_LONG check_error 'p:^foo.1/bar vfs_read' # BAD_GROUP_NAME -check_error 'p:foo/^ vfs_read' # NO_EVENT_NAME check_error 'p:foo/^12345678901234567890123456789012345678901234567890123456789012345 vfs_read' # EVENT_TOO_LONG check_error 'p:foo/^bar.1 vfs_read' # BAD_EVENT_NAME -- 2.35.1

2 years, 4 months

1
0
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror August 2022