September 2022 - Linux-kselftest-mirror

[PATCH net-next 00/15] add tc-testing qdisc test cases

by Zhengchao Shao

For this patchset, test cases of the qdisc modules are added to the tc-testing test suite. After a test case is added locally, the test result is as follows: ./tdc.py -c atm ok 1 7628 - Create ATM with default setting ok 2 390a - Delete ATM with valid handle ok 3 32a0 - Show ATM class ok 4 6310 - Dump ATM stats ./tdc.py -c choke ok 1 8937 - Create CHOKE with default setting ok 2 48c0 - Create CHOKE with min packet setting ok 3 38c1 - Create CHOKE with max packet setting ok 4 234a - Create CHOKE with ecn setting ok 5 4380 - Create CHOKE with burst setting ok 6 48c7 - Delete CHOKE with valid handle ok 7 4398 - Replace CHOKE with min setting ok 8 0301 - Change CHOKE with limit setting ./tdc.py -c codel ok 1 983a - Create CODEL with default setting ok 2 38aa - Create CODEL with limit packet setting ok 3 9178 - Create CODEL with target setting ok 4 78d1 - Create CODEL with interval setting ok 5 238a - Create CODEL with ecn setting ok 6 939c - Create CODEL with ce_threshold setting ok 7 8380 - Delete CODEL with valid handle ok 8 289c - Replace CODEL with limit setting ok 9 0648 - Change CODEL with limit setting ./tdc.py -c etf ok 1 34ba - Create ETF with default setting ok 2 438f - Create ETF with delta nanos setting ok 3 9041 - Create ETF with deadline_mode setting ok 4 9a0c - Create ETF with skip_sock_check setting ok 5 2093 - Delete ETF with valid handle ./tdc.py -c fq ok 1 983b - Create FQ with default setting ok 2 38a1 - Create FQ with limit packet setting ok 3 0a18 - Create FQ with flow_limit setting ok 4 2390 - Create FQ with quantum setting ok 5 845b - Create FQ with initial_quantum setting ok 6 9398 - Create FQ with maxrate setting ok 7 342c - Create FQ with nopacing setting ok 8 6391 - Create FQ with refill_delay setting ok 9 238b - Create FQ with low_rate_threshold setting ok 10 7582 - Create FQ with orphan_mask setting ok 11 4894 - Create FQ with timer_slack setting ok 12 324c - Create FQ with ce_threshold setting ok 13 424a - Create FQ with horizon time setting ok 14 89e1 - Create FQ with horizon_cap setting ok 15 32e1 - Delete FQ with valid handle ok 16 49b0 - Replace FQ with limit setting ok 17 9478 - Change FQ with limit setting ./tdc.py -c gred ok 1 8942 - Create GRED with default setting ok 2 5783 - Create GRED with grio setting ok 3 8a09 - Create GRED with limit setting ok 4 48cb - Create GRED with ecn setting ok 5 763a - Change GRED setting ok 6 8309 - Show GRED class ./tdc.py -c hhf ok 1 4812 - Create HHF with default setting ok 2 8a92 - Create HHF with limit setting ok 3 3491 - Create HHF with quantum setting ok 4 ba04 - Create HHF with reset_timeout setting ok 5 4238 - Create HHF with admit_bytes setting ok 6 839f - Create HHF with evict_timeout setting ok 7 a044 - Create HHF with non_hh_weight setting ok 8 32f9 - Change HHF with limit setting ok 9 385e - Show HHF class ./tdc.py -c pfifo_fast ok 1 900c - Create pfifo_fast with default setting ok 2 7470 - Dump pfifo_fast stats ok 3 b974 - Replace pfifo_fast with different handle ok 4 3240 - Delete pfifo_fast with valid handle ok 5 4385 - Delete pfifo_fast with invalid handle ./tdc.py -c plug ok 1 3289 - Create PLUG with default setting ok 2 0917 - Create PLUG with block setting ok 3 483b - Create PLUG with release setting ok 4 4995 - Create PLUG with release_indefinite setting ok 5 389c - Create PLUG with limit setting ok 6 384a - Delete PLUG with valid handle ok 7 439a - Replace PLUG with limit setting ok 8 9831 - Change PLUG with limit setting ./tdc.py -c sfb ok 1 3294 - Create SFB with default setting ok 2 430a - Create SFB with rehash setting ok 3 3410 - Create SFB with db setting ok 4 49a0 - Create SFB with limit setting ok 5 1241 - Create SFB with max setting ok 6 3249 - Create SFB with target setting ok 7 30a9 - Create SFB with increment setting ok 8 239a - Create SFB with decrement setting ok 9 9301 - Create SFB with penalty_rate setting ok 10 2a01 - Create SFB with penalty_burst setting ok 11 3209 - Change SFB with rehash setting ok 12 5447 - Show SFB class ./tdc.py -c sfq ok 1 7482 - Create SFQ with default setting ok 2 c186 - Create SFQ with limit setting ok 3 ae23 - Create SFQ with perturb setting ok 4 a430 - Create SFQ with quantum setting ok 5 4539 - Create SFQ with divisor setting ok 6 b089 - Create SFQ with flows setting ok 7 99a0 - Create SFQ with depth setting ok 8 7389 - Create SFQ with headdrop setting ok 9 6472 - Create SFQ with redflowlimit setting ok 10 2a01 - Create SFB with penalty_burst setting ok 11 3209 - Change SFB with rehash setting ok 12 5447 - Show SFB class ./tdc.py -c sfq ok 1 7482 - Create SFQ with default setting ok 2 c186 - Create SFQ with limit setting ok 3 ae23 - Create SFQ with perturb setting ok 4 a430 - Create SFQ with quantum setting ok 5 4539 - Create SFQ with divisor setting ok 6 b089 - Create SFQ with flows setting ok 7 99a0 - Create SFQ with depth setting ok 8 7389 - Create SFQ with headdrop setting ok 9 6472 - Create SFQ with redflowlimit setting ok 10 8929 - Show SFQ class ./tdc.py -c skbprio ok 1 283e - Create skbprio with default setting ok 2 c086 - Create skbprio with limit setting ok 3 6733 - Change skbprio with limit setting ok 4 2958 - Show skbprio class ./tdc.py -c taprio ok 1 ba39 - Add taprio Qdisc to multi-queue device (8 queues) ok 2 9462 - Add taprio Qdisc with multiple sched-entry ok 3 8d92 - Add taprio Qdisc with txtime-delay ok 4 d092 - Delete taprio Qdisc with valid handle ok 5 8471 - Show taprio class ok 6 0a85 - Add taprio Qdisc to single-queue device ./tdc.py -c tbf ok 1 6430 - Create TBF with default setting ok 2 0518 - Create TBF with mtu setting ok 3 320a - Create TBF with peakrate setting ok 4 239b - Create TBF with latency setting ok 5 c975 - Create TBF with overhead setting ok 6 948c - Create TBF with linklayer setting ok 7 3549 - Replace TBF with mtu ok 8 f948 - Change TBF with latency time ok 9 2348 - Show TBF class ./tdc.py -c teql ok 1 84a0 - Create TEQL with default setting ok 2 7734 - Create TEQL with multiple device ok 3 34a9 - Delete TEQL with valid handle ok 4 6289 - Show TEQL stats Zhengchao Shao (15): selftests/tc-testings: add selftests for atm qdisc selftests/tc-testings: add selftests for choke qdisc selftests/tc-testings: add selftests for codel qdisc selftests/tc-testings: add selftests for etf qdisc selftests/tc-testings: add selftests for fq qdisc selftests/tc-testings: add selftests for gred qdisc selftests/tc-testings: add selftests for hhf qdisc selftests/tc-testings: add selftests for pfifo_fast qdisc selftests/tc-testings: add selftests for plug qdisc selftests/tc-testings: add selftests for sfb qdisc selftests/tc-testings: add selftests for sfq qdisc selftests/tc-testings: add selftests for skbprio qdisc selftests/tc-testings: add selftests for taprio qdisc selftests/tc-testings: add selftests for tbf qdisc selftests/tc-testings: add selftests for teql qdisc .../tc-testing/tc-tests/qdiscs/atm.json | 94 +++++ .../tc-testing/tc-tests/qdiscs/choke.json | 188 +++++++++ .../tc-testing/tc-tests/qdiscs/codel.json | 211 ++++++++++ .../tc-testing/tc-tests/qdiscs/etf.json | 117 ++++++ .../tc-testing/tc-tests/qdiscs/fq.json | 395 ++++++++++++++++++ .../tc-testing/tc-tests/qdiscs/gred.json | 164 ++++++++ .../tc-testing/tc-tests/qdiscs/hhf.json | 210 ++++++++++ .../tc-tests/qdiscs/pfifo_fast.json | 119 ++++++ .../tc-testing/tc-tests/qdiscs/plug.json | 188 +++++++++ .../tc-testing/tc-tests/qdiscs/sfb.json | 279 +++++++++++++ .../tc-testing/tc-tests/qdiscs/sfq.json | 232 ++++++++++ .../tc-testing/tc-tests/qdiscs/skbprio.json | 95 +++++ .../tc-testing/tc-tests/qdiscs/taprio.json | 135 ++++++ .../tc-testing/tc-tests/qdiscs/tbf.json | 211 ++++++++++ .../tc-testing/tc-tests/qdiscs/teql.json | 97 +++++ 15 files changed, 2735 insertions(+) create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/atm.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/choke.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/codel.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/etf.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/fq.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/gred.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/hhf.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/pfifo_fast.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/plug.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfb.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfq.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/skbprio.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/taprio.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/tbf.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/teql.json -- 2.17.1

1 year, 9 months

1
15
0 0

Re: [PATCH -next v2 1/5] docs: notifier-error-inject: fix non-working usage of negative values

by zhaogongyi

Hi! > > On 17.09.22 07:39, Akinobu Mita wrote: > > 2022年9月15日(木) 18:01 Zhao Gongyi <zhaogongyi(a)huawei.com>: > >> > >> Fault injection uses debugfs in a way that the provided values via > >> sysfs are interpreted as u64. Providing negative numbers results in > >> an error: > >> > >> # cd sys/kernel/debug/notifier-error-inject/memory > >> # echo -12 > actions/MEM_GOING_ONLINE/error > >> -bash: echo: write error: Invalid argument > >> > >> Update the docs and examples to use "printf %#x <val>" in these cases. > > > > I'd rather fix the notifier-error-inject module than change the user > interface. > > I'll send a patch, so could you check if that solves the problem. > > > > That will also make patch #2 unnecessary, correct? Yes. But there is another commit 005747526d4f3c2ec995891e95cb7625161022f9 that has the same problem. Thanks! > > -- > Thanks, > > David / dhildenb

1 year, 9 months

2
1
0 0

[PATCH -next v2 0/5] Optimize and bugfix for notifier error

by Zhao Gongyi

1. Fix non-working usage of negative values 2. Add checking after online or offline 3. Restore memory before exit 4. Correct test's name Changes in v2: - Replace 'online_all_hot_pluggable_memory' with 'online_all_offline_memory()'. - Collect Reviewed-by tags from David Hildenbrand. Zhao Gongyi (5): docs: notifier-error-inject: fix non-working usage of negative values selftests/memory-hotplug: Use 'printf' instead of 'echo' selftests/memory-hotplug: Add checking after online or offline selftests/memory-hotplug: Restore memory before exit docs: notifier-error-inject: Correct test's name .../fault-injection/notifier-error-inject.rst | 14 ++++--- .../memory-hotplug/mem-on-off-test.sh | 37 +++++++++++++++---- 2 files changed, 39 insertions(+), 12 deletions(-) -- 2.17.1

1 year, 9 months

3
7
0 0

[PATCH] lib/notifier-error-inject: fix error when writing errno to debugfs file

by Akinobu Mita

The simple attribute files do not accept a negative value since the commit 488dac0c9237 ("libfs: fix error cast of negative value in simple_attr_write()"), so we can no longer use DEFINE_SIMPLE_ATTRIBUTE() to define a file operations for errno value. Fixes: 488dac0c9237 ("libfs: fix error cast of negative value in simple_attr_write()") Reported-by: Wei Yongjun <weiyongjun1(a)huawei.com> Signed-off-by: Akinobu Mita <akinobu.mita(a)gmail.com> --- lib/notifier-error-inject.c | 38 ++++++++++++++++++++++++++++++------- 1 file changed, 31 insertions(+), 7 deletions(-) diff --git a/lib/notifier-error-inject.c b/lib/notifier-error-inject.c index 21016b32d313..30ec41f58d53 100644 --- a/lib/notifier-error-inject.c +++ b/lib/notifier-error-inject.c @@ -3,20 +3,44 @@ #include "notifier-error-inject.h" -static int debugfs_errno_set(void *data, u64 val) +static int notifier_err_errno_show(struct seq_file *m, void *data) { - *(int *)data = clamp_t(int, val, -MAX_ERRNO, 0); + int *value = m->private; + + seq_printf(m, "%d\n", *value); + return 0; } -static int debugfs_errno_get(void *data, u64 *val) +static int notifier_err_errno_open(struct inode *inode, struct file *file) { - *val = *(int *)data; - return 0; + return single_open(file, notifier_err_errno_show, inode->i_private); +} + +static ssize_t notifier_err_errno_write(struct file *file, const char __user *ubuf, size_t len, + loff_t *offp) +{ + struct seq_file *m = file->private_data; + int *value = m->private; + int ret; + + ret = kstrtoint_from_user(ubuf, len, 0, value); + if (ret) + return ret; + + *value = clamp(*value, -MAX_ERRNO, 0); + + return len; } -DEFINE_SIMPLE_ATTRIBUTE(fops_errno, debugfs_errno_get, debugfs_errno_set, - "%lld\n"); +static const struct file_operations fops_errno = { + .owner = THIS_MODULE, + .open = notifier_err_errno_open, + .read = seq_read, + .write = notifier_err_errno_write, + .llseek = seq_lseek, + .release = single_release, +}; static struct dentry *debugfs_create_errno(const char *name, umode_t mode, struct dentry *parent, int *value) -- 2.34.1

1 year, 9 months

1
0
0 0

[PATCH net-next,v2 18/18] selftests/tc-testings: add show class case for red qdisc

by Zhengchao Shao

Test 290a: Show RED class Signed-off-by: Zhengchao Shao <shaozhengchao(a)huawei.com> --- .../tc-testing/tc-tests/qdiscs/red.json | 23 +++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/red.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/red.json index 0703a2a255eb..4b3e449857f2 100644 --- a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/red.json +++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/red.json @@ -181,5 +181,28 @@ "$TC qdisc del dev $DUMMY handle 1: root", "$IP link del dev $DUMMY type dummy" ] + }, + { + "id": "290a", + "name": "Show RED class", + "category": [ + "qdisc", + "red" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root red limit 1M avpkt 1500 min 100K max 300K", + "expExitCode": "0", + "verifyCmd": "$TC class show dev $DUMMY", + "matchPattern": "class red 1:[0-9]+ parent 1:", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] } ] -- 2.17.1

1 year, 9 months

1
0
0 0

[PATCH net-next,v2 17/18] selftests/tc-testings: add show class case for prio qdisc

by Zhengchao Shao

Test 2410: Show prio class Signed-off-by: Zhengchao Shao <shaozhengchao(a)huawei.com> --- .../tc-testing/tc-tests/qdiscs/prio.json | 20 +++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/prio.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/prio.json index 3076c02d08d6..8186de2f0dcf 100644 --- a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/prio.json +++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/prio.json @@ -272,5 +272,25 @@ "teardown": [ "$IP link del dev $DUMMY type dummy" ] + }, + { + "id": "2410", + "name": "Show prio class", + "category": [ + "qdisc", + "prio" + ], + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root prio", + "expExitCode": "0", + "verifyCmd": "$TC class show dev $DUMMY", + "matchPattern": "class prio 1:[0-9]+ parent 1:", + "matchCount": "3", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root prio", + "$IP link del dev $DUMMY type dummy" + ] } ] -- 2.17.1

1 year, 9 months

1
0
0 0

[PATCH net-next,v2 16/18] selftests/tc-testings: add show class case for mq qdisc

by Zhengchao Shao

Test 1023: Show mq class Signed-off-by: Zhengchao Shao <shaozhengchao(a)huawei.com> --- .../tc-testing/tc-tests/qdiscs/mq.json | 24 ++++++++++++++++++- 1 file changed, 23 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/mq.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/mq.json index c6046096d9db..44fbfc6caec7 100644 --- a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/mq.json +++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/mq.json @@ -133,5 +133,27 @@ "teardown": [ "echo \"1\" > /sys/bus/netdevsim/del_device" ] - } + }, + { + "id": "1023", + "name": "Show mq class", + "category": [ + "qdisc", + "mq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "echo \"1 1 4\" > /sys/bus/netdevsim/new_device" + ], + "cmdUnderTest": "$TC qdisc add dev $ETH root handle 1: mq", + "expExitCode": "0", + "verifyCmd": "$TC class show dev $ETH", + "matchPattern": "class mq 1:[0-9]+ root", + "matchCount": "4", + "teardown": [ + "echo \"1\" > /sys/bus/netdevsim/del_device" + ] + } ] -- 2.17.1

1 year, 9 months

1
0
0 0

[PATCH net-next,v2 15/18] selftests/tc-testings: add show class case for ingress qdisc

by Zhengchao Shao

Test 0521: Show ingress class Signed-off-by: Zhengchao Shao <shaozhengchao(a)huawei.com> --- .../tc-testing/tc-tests/qdiscs/ingress.json | 20 +++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/ingress.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/ingress.json index d99dba6e2b1a..11d33362408c 100644 --- a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/ingress.json +++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/ingress.json @@ -98,5 +98,25 @@ "teardown": [ "$IP link del dev $DUMMY type dummy" ] + }, + { + "id": "0521", + "name": "Show ingress class", + "category": [ + "qdisc", + "ingress" + ], + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY ingress", + "expExitCode": "0", + "verifyCmd": "$TC class show dev $DUMMY", + "matchPattern": "class ingress", + "matchCount": "0", + "teardown": [ + "$TC qdisc del dev $DUMMY ingress", + "$IP link del dev $DUMMY type dummy" + ] } ] -- 2.17.1

1 year, 9 months

1
0
0 0

[PATCH net-next,v2 14/18] selftests/tc-testings: add selftests for qfq qdisc

by Zhengchao Shao

Test 0582: Create QFQ with default setting Test c9a3: Create QFQ with class weight setting Test 8452: Create QFQ with class maxpkt setting Test d920: Create QFQ with multiple class setting Test 0548: Delete QFQ with handle Test 5901: Show QFQ class Signed-off-by: Zhengchao Shao <shaozhengchao(a)huawei.com> --- .../tc-testing/tc-tests/qdiscs/qfq.json | 145 ++++++++++++++++++ 1 file changed, 145 insertions(+) create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/qfq.json diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/qfq.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/qfq.json new file mode 100644 index 000000000000..330f1a25e0ab --- /dev/null +++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/qfq.json @@ -0,0 +1,145 @@ +[ + { + "id": "0582", + "name": "Create QFQ with default setting", + "category": [ + "qdisc", + "qfq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root qfq", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc qfq 1: root refcnt [0-9]+", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "c9a3", + "name": "Create QFQ with class weight setting", + "category": [ + "qdisc", + "qfq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root qfq" + ], + "cmdUnderTest": "$TC class add dev $DUMMY parent 1: classid 1:1 qfq weight 100", + "expExitCode": "0", + "verifyCmd": "$TC class show dev $DUMMY", + "matchPattern": "class qfq 1:1 root weight 100 maxpkt", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "8452", + "name": "Create QFQ with class maxpkt setting", + "category": [ + "qdisc", + "qfq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root qfq" + ], + "cmdUnderTest": "$TC class add dev $DUMMY parent 1: classid 1:1 qfq maxpkt 2000", + "expExitCode": "0", + "verifyCmd": "$TC class show dev $DUMMY", + "matchPattern": "class qfq 1:1 root weight 1 maxpkt 2000", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "d920", + "name": "Create QFQ with multiple class setting", + "category": [ + "qdisc", + "qfq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root qfq", + "$TC class add dev $DUMMY parent 1: classid 1:1 qfq weight 100" + ], + "cmdUnderTest": "$TC class add dev $DUMMY parent 1: classid 1:2 qfq weight 200", + "expExitCode": "0", + "verifyCmd": "$TC class show dev $DUMMY", + "matchPattern": "class qfq 1:[0-9]+ root weight [0-9]+00 maxpkt", + "matchCount": "2", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "0548", + "name": "Delete QFQ with handle", + "category": [ + "qdisc", + "qfq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root qfq", + "$TC class add dev $DUMMY parent 1: classid 1:1 qfq weight 100" + ], + "cmdUnderTest": "$TC qdisc del dev $DUMMY handle 1: root", + "expExitCode": "0", + "verifyCmd": "$TC class show dev $DUMMY", + "matchPattern": "qdisc qfq 1: root refcnt [0-9]+", + "matchCount": "0", + "teardown": [ + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "5901", + "name": "Show QFQ class", + "category": [ + "qdisc", + "qfq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root qfq", + "expExitCode": "0", + "verifyCmd": "$TC class show dev $DUMMY", + "matchPattern": "class qfq 1:", + "matchCount": "0", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + } +] -- 2.17.1

1 year, 9 months

1
0
0 0

[PATCH net-next,v2 13/18] selftests/tc-testings: add selftests for netem qdisc

by Zhengchao Shao

Test cb28: Create NETEM with default setting Test a089: Create NETEM with limit flag Test 3449: Create NETEM with delay time Test 3782: Create NETEM with distribution and corrupt flag Test 2b82: Create NETEM with distribution and duplicate flag Test a932: Create NETEM with distribution and loss flag Test e01a: Create NETEM with distribution and loss state flag Test ba29: Create NETEM with loss gemodel flag Test 0492: Create NETEM with reorder flag Test 7862: Create NETEM with rate limit Test 7235: Create NETEM with multiple slot rate Test 5439: Create NETEM with multiple slot setting Test 5029: Change NETEM with loss state Test 3785: Replace NETEM with delay time Test 4502: Delete NETEM with handle Test 0785: Show NETEM class Signed-off-by: Zhengchao Shao <shaozhengchao(a)huawei.com> --- .../tc-testing/tc-tests/qdiscs/netem.json | 372 ++++++++++++++++++ 1 file changed, 372 insertions(+) create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/netem.json diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/netem.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/netem.json new file mode 100644 index 000000000000..7e41f548f8e8 --- /dev/null +++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/netem.json @@ -0,0 +1,372 @@ +[ + { + "id": "cb28", + "name": "Create NETEM with default setting", + "category": [ + "qdisc", + "netem" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root netem", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc netem 1: root refcnt [0-9]+ limit", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "a089", + "name": "Create NETEM with limit flag", + "category": [ + "qdisc", + "netem" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root netem limit 200", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc netem 1: root refcnt [0-9]+ limit 200", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "3449", + "name": "Create NETEM with delay time", + "category": [ + "qdisc", + "netem" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root netem delay 100ms", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc netem 1: root refcnt [0-9]+ .*delay 100ms", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "3782", + "name": "Create NETEM with distribution and corrupt flag", + "category": [ + "qdisc", + "netem" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root netem delay 100ms 10ms distribution normal corrupt 1%", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc netem 1: root refcnt [0-9]+ .*delay 100ms 10ms corrupt 1%", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "2b82", + "name": "Create NETEM with distribution and duplicate flag", + "category": [ + "qdisc", + "netem" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root netem delay 100ms 10ms distribution normal duplicate 1%", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc netem 1: root refcnt [0-9]+ .*delay 100ms 10ms duplicate 1%", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "a932", + "name": "Create NETEM with distribution and loss flag", + "category": [ + "qdisc", + "netem" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root netem delay 100ms 10ms distribution pareto loss 1%", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc netem 1: root refcnt [0-9]+ .*delay 100ms 10ms loss 1%", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "e01a", + "name": "Create NETEM with distribution and loss state flag", + "category": [ + "qdisc", + "netem" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root netem delay 100ms 10ms distribution paretonormal loss state 1", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc netem 1: root refcnt [0-9]+ .*delay 100ms 10ms loss state p13 1% p31 99% p32 0% p23 100% p14 0%", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "ba29", + "name": "Create NETEM with loss gemodel flag", + "category": [ + "qdisc", + "netem" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root netem loss gemodel 1%", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc netem 1: root refcnt [0-9]+ .*loss gemodel p 1%", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "0492", + "name": "Create NETEM with reorder flag", + "category": [ + "qdisc", + "netem" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root netem delay 100ms 10ms reorder 2% gap 100", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc netem 1: root refcnt [0-9]+ .*reorder 2%", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "7862", + "name": "Create NETEM with rate limit", + "category": [ + "qdisc", + "netem" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root netem rate 20000", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc netem 1: root refcnt [0-9]+ .*rate 20Kbit", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "7235", + "name": "Create NETEM with multiple slot rate", + "category": [ + "qdisc", + "netem" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root netem slot 10 200 packets 2000 bytes 9000", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc netem 1: root refcnt [0-9]+ .*slot 10ns 200ns packets 2000 bytes 9000", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "5439", + "name": "Create NETEM with multiple slot setting", + "category": [ + "qdisc", + "netem" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root netem slot distribution pareto 1ms 0.1ms", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc netem 1: root refcnt [0-9]+ .*slot distribution 1ms 100us", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "5029", + "name": "Change NETEM with loss state", + "category": [ + "qdisc", + "netem" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root netem delay 100ms 10ms distribution normal loss 1%" + ], + "cmdUnderTest": "$TC qdisc change dev $DUMMY handle 1: root netem delay 100ms 10ms distribution normal loss 2%", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc netem 1: root refcnt [0-9]+ .*loss 2%", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "3785", + "name": "Replace NETEM with delay time", + "category": [ + "qdisc", + "netem" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root netem delay 100ms 10ms distribution normal loss 1%" + ], + "cmdUnderTest": "$TC qdisc replace dev $DUMMY handle 1: root netem delay 200ms 10ms", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc netem 1: root refcnt [0-9]+ .*delay 200ms 10ms", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "4502", + "name": "Delete NETEM with handle", + "category": [ + "qdisc", + "netem" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root netem delay 100ms 10ms distribution normal" + ], + "cmdUnderTest": "$TC qdisc del dev $DUMMY handle 1: root", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc netem 1: root refcnt [0-9]+ .*delay 100ms 10ms", + "matchCount": "0", + "teardown": [ + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "0785", + "name": "Show NETEM class", + "category": [ + "qdisc", + "netem" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root netem", + "expExitCode": "0", + "verifyCmd": "$TC class show dev $DUMMY", + "matchPattern": "class netem 1:", + "matchCount": "0", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + } +] -- 2.17.1

1 year, 9 months

1
0
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror September 2022