March 2023 - Linux-kselftest-mirror

[PATCH net-next v4 0/3] Add support for sockmap to vsock.

by Bobby Eshleman

We're testing usage of vsock as a way to redirect guest-local UDS requests to the host and this patch series greatly improves the performance of such a setup. Compared to copying packets via userspace, this improves throughput by 121% in basic testing. Tested as follows. Setup: guest unix dgram sender -> guest vsock redirector -> host vsock server Threads: 1 Payload: 64k No sockmap: - 76.3 MB/s - The guest vsock redirector was "socat VSOCK-CONNECT:2:1234 UNIX-RECV:/path/to/sock" Using sockmap (this patch): - 168.8 MB/s (+121%) - The guest redirector was a simple sockmap echo server, redirecting unix ingress to vsock 2:1234 egress. - Same sender and server programs *Note: these numbers are from RFC v1 Only the virtio transport has been tested. The loopback transport was used in writing bpf/selftests, but not thoroughly tested otherwise. This series requires the skb patch. Changes in v4: - af_vsock: fix parameter alignment in vsock_dgram_recvmsg() - af_vsock: add TCP_ESTABLISHED comment in vsock_dgram_connect() - vsock/bpf: change ret type to bool Changes in v3: - vsock/bpf: Refactor wait logic in vsock_bpf_recvmsg() to avoid backwards goto - vsock/bpf: Check psock before acquiring slock - vsock/bpf: Return bool instead of int of 0 or 1 - vsock/bpf: Wrap macro args __sk/__psock in parens - vsock/bpf: Place comment trailer */ on separate line Changes in v2: - vsock/bpf: rename vsock_dgram_* -> vsock_* - vsock/bpf: change sk_psock_{get,put} and {lock,release}_sock() order to minimize slock hold time - vsock/bpf: use "new style" wait - vsock/bpf: fix bug in wait log - vsock/bpf: add check that recvmsg sk_type is one dgram, seqpacket, or stream. Return error if not one of the three. - virtio/vsock: comment __skb_recv_datagram() usage - virtio/vsock: do not init copied in read_skb() - vsock/bpf: add ifdef guard around struct proto in dgram_recvmsg() - selftests/bpf: add vsock loopback config for aarch64 - selftests/bpf: add vsock loopback config for s390x - selftests/bpf: remove vsock device from vmtest.sh qemu machine - selftests/bpf: remove CONFIG_VIRTIO_VSOCKETS=y from config.x86_64 - vsock/bpf: move transport-related (e.g., if (!vsk->transport)) checks out of fast path Signed-off-by: Bobby Eshleman <bobby.eshleman(a)bytedance.com> --- Bobby Eshleman (3): vsock: support sockmap selftests/bpf: add vsock to vmtest.sh selftests/bpf: add a test case for vsock sockmap drivers/vhost/vsock.c | 1 + include/linux/virtio_vsock.h | 1 + include/net/af_vsock.h | 17 ++ net/vmw_vsock/Makefile | 1 + net/vmw_vsock/af_vsock.c | 64 +++++++- net/vmw_vsock/virtio_transport.c | 2 + net/vmw_vsock/virtio_transport_common.c | 25 +++ net/vmw_vsock/vsock_bpf.c | 174 +++++++++++++++++++++ net/vmw_vsock/vsock_loopback.c | 2 + tools/testing/selftests/bpf/config.aarch64 | 2 + tools/testing/selftests/bpf/config.s390x | 3 + tools/testing/selftests/bpf/config.x86_64 | 3 + .../selftests/bpf/prog_tests/sockmap_listen.c | 163 +++++++++++++++++++ 13 files changed, 452 insertions(+), 6 deletions(-) --- base-commit: e5b42483ccce50d5b957f474fd332afd4ef0c27b change-id: 20230327-vsock-sockmap-30b090c70cd1 Best regards, -- Bobby Eshleman <bobby.eshleman(a)bytedance.com>

1 year, 1 month

4
7
0 0

[PATCH 0/3] tools/nolibc: add testcases for vfprintf

by Thomas Weißschuh

vfprintf() is complex and so far did not have proper tests. This series is based on the "dev" branch of the RCU tree. Signed-off-by: Thomas Weißschuh <linux(a)weissschuh.net> --- Thomas Weißschuh (3): tools/nolibc: add wrapper for memfd_create tools/nolibc: let FILE streams contain an fd tools/nolibc: add testcases for vfprintf tools/include/nolibc/stdio.h | 36 +++---------- tools/include/nolibc/sys.h | 23 +++++++++ tools/testing/selftests/nolibc/nolibc-test.c | 77 ++++++++++++++++++++++++++++ 3 files changed, 107 insertions(+), 29 deletions(-) --- base-commit: a5333c037de823912dd20e933785c63de7679e64 change-id: 20230328-nolibc-printf-test-052d5abc2118 Best regards, -- Thomas Weißschuh <linux(a)weissschuh.net>

1 year, 1 month

2
10
0 0

[PATCH] tools/nolibc: validate C99 compatibility

by Thomas Weißschuh

Most of the code was migrated to C99-conformant __asm__ statements before. It seems string.h was missed. Fix string.h and also validate during build that nolibc stays within C99. Signed-off-by: Thomas Weißschuh <linux(a)weissschuh.net> --- This patch is based on the "dev" branch of the RCU tree. --- tools/include/nolibc/string.h | 4 ++-- tools/testing/selftests/nolibc/Makefile | 2 +- tools/testing/selftests/nolibc/nolibc-test.c | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/tools/include/nolibc/string.h b/tools/include/nolibc/string.h index fffdaf6ff467..0c2e06c7c477 100644 --- a/tools/include/nolibc/string.h +++ b/tools/include/nolibc/string.h @@ -90,7 +90,7 @@ void *memset(void *dst, int b, size_t len) while (len--) { /* prevent gcc from recognizing memset() here */ - asm volatile(""); + __asm__ volatile(""); *(p++) = b; } return dst; @@ -139,7 +139,7 @@ size_t strlen(const char *str) size_t len; for (len = 0; str[len]; len++) - asm(""); + __asm__(""); return len; } diff --git a/tools/testing/selftests/nolibc/Makefile b/tools/testing/selftests/nolibc/Makefile index bbce57420465..55efcb1011cb 100644 --- a/tools/testing/selftests/nolibc/Makefile +++ b/tools/testing/selftests/nolibc/Makefile @@ -83,7 +83,7 @@ CFLAGS_STKP_i386 = $(CFLAGS_STACKPROTECTOR) CFLAGS_STKP_x86_64 = $(CFLAGS_STACKPROTECTOR) CFLAGS_STKP_x86 = $(CFLAGS_STACKPROTECTOR) CFLAGS_s390 = -m64 -CFLAGS ?= -Os -fno-ident -fno-asynchronous-unwind-tables \ +CFLAGS ?= -Os -fno-ident -fno-asynchronous-unwind-tables -std=c99 \ $(call cc-option,-fno-stack-protector) \ $(CFLAGS_STKP_$(ARCH)) $(CFLAGS_$(ARCH)) LDFLAGS := -s diff --git a/tools/testing/selftests/nolibc/nolibc-test.c b/tools/testing/selftests/nolibc/nolibc-test.c index 47013b78972e..932b2c7b0ce3 100644 --- a/tools/testing/selftests/nolibc/nolibc-test.c +++ b/tools/testing/selftests/nolibc/nolibc-test.c @@ -895,7 +895,7 @@ int main(int argc, char **argv, char **envp) #else else if (ioperm(0x501, 1, 1) == 0) #endif - asm volatile ("outb %%al, %%dx" :: "d"(0x501), "a"(0)); + __asm__ volatile ("outb %%al, %%dx" :: "d"(0x501), "a"(0)); /* if it does nothing, fall back to the regular panic */ #endif } --- base-commit: a5333c037de823912dd20e933785c63de7679e64 change-id: 20230328-nolibc-c99-59f44ea45636 Best regards, -- Thomas Weißschuh <linux(a)weissschuh.net>

1 year, 1 month

2
7
0 0

[PATCH v2] Input: Add KUnit tests for some of the input core helper functions

by Javier Martinez Canillas

The input subsystem doesn't currently have any unit tests, let's add a CONFIG_INPUT_KUNIT_TEST option that builds a test suite to be executed with the KUnit test infrastructure. For now, only three tests were added for some of the input core helper functions that are trivial to test: * input_test_polling: set/get poll interval and set-up a poll handler. * input_test_timestamp: set/get input event timestamps. * input_test_match_device_id: match a device by bus, vendor, product, version and events capable of handling. But having the minimal KUnit support allows to add more tests and suites as follow-up changes. The tests can be run with the following command: $ ./tools/testing/kunit/kunit.py run --kunitconfig=drivers/input/tests/ Signed-off-by: Javier Martinez Canillas <javierm(a)redhat.com> Tested-by: Enric Balletbo i Serra <eballetbo(a)redhat.com> --- Changes in v2: - Add Enric's Tested-by tag. - Drop the .kunitconfig from the example command (Daniel Latypov). - Add .kunitconfig that wasn't added by mistake (Daniel Latypov). - Remove ref to KUnit docs in the Kconfig help text (Daniel Latypov). - Inline function calls in the KUNIT_ASSERT_*() calls (Daniel Latypov). - Add some comments to explain why a fail or success is expected. drivers/input/Kconfig | 10 +++ drivers/input/Makefile | 1 + drivers/input/tests/.kunitconfig | 3 + drivers/input/tests/Makefile | 3 + drivers/input/tests/input_test.c | 150 +++++++++++++++++++++++++++++++ 5 files changed, 167 insertions(+) create mode 100644 drivers/input/tests/.kunitconfig create mode 100644 drivers/input/tests/Makefile create mode 100644 drivers/input/tests/input_test.c diff --git a/drivers/input/Kconfig b/drivers/input/Kconfig index e2752f7364bc..735f90b74ee5 100644 --- a/drivers/input/Kconfig +++ b/drivers/input/Kconfig @@ -166,6 +166,16 @@ config INPUT_EVBUG To compile this driver as a module, choose M here: the module will be called evbug. +config INPUT_KUNIT_TEST + tristate "KUnit tests for Input" if !KUNIT_ALL_TESTS + depends on INPUT && KUNIT=y + default KUNIT_ALL_TESTS + help + Say Y here if you want to build the KUnit tests for the input + subsystem. + + If in doubt, say "N". + config INPUT_APMPOWER tristate "Input Power Event -> APM Bridge" if EXPERT depends on INPUT && APM_EMULATION diff --git a/drivers/input/Makefile b/drivers/input/Makefile index 2266c7d010ef..c78753274921 100644 --- a/drivers/input/Makefile +++ b/drivers/input/Makefile @@ -26,6 +26,7 @@ obj-$(CONFIG_INPUT_JOYSTICK) += joystick/ obj-$(CONFIG_INPUT_TABLET) += tablet/ obj-$(CONFIG_INPUT_TOUCHSCREEN) += touchscreen/ obj-$(CONFIG_INPUT_MISC) += misc/ +obj-$(CONFIG_INPUT_KUNIT_TEST) += tests/ obj-$(CONFIG_INPUT_APMPOWER) += apm-power.o diff --git a/drivers/input/tests/.kunitconfig b/drivers/input/tests/.kunitconfig new file mode 100644 index 000000000000..2f5bedf8028e --- /dev/null +++ b/drivers/input/tests/.kunitconfig @@ -0,0 +1,3 @@ +CONFIG_KUNIT=y +CONFIG_INPUT=y +CONFIG_INPUT_KUNIT_TEST=y diff --git a/drivers/input/tests/Makefile b/drivers/input/tests/Makefile new file mode 100644 index 000000000000..90cf954181bc --- /dev/null +++ b/drivers/input/tests/Makefile @@ -0,0 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0 + +obj-$(CONFIG_INPUT_KUNIT_TEST) += input_test.o diff --git a/drivers/input/tests/input_test.c b/drivers/input/tests/input_test.c new file mode 100644 index 000000000000..e5a6c1ad2167 --- /dev/null +++ b/drivers/input/tests/input_test.c @@ -0,0 +1,150 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * KUnit test for the input core. + * + * Copyright (c) 2023 Red Hat Inc + */ + +#include <linux/delay.h> +#include <linux/input.h> + +#include <kunit/test.h> + +#define POLL_INTERVAL 100 + +static int input_test_init(struct kunit *test) +{ + struct input_dev *input_dev; + int ret; + + input_dev = input_allocate_device(); + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, input_dev); + + input_dev->name = "Test input device"; + input_dev->id.bustype = BUS_VIRTUAL; + input_dev->id.vendor = 1; + input_dev->id.product = 1; + input_dev->id.version = 1; + input_set_capability(input_dev, EV_KEY, BTN_LEFT); + input_set_capability(input_dev, EV_KEY, BTN_RIGHT); + + ret = input_register_device(input_dev); + if (ret) { + input_free_device(input_dev); + KUNIT_ASSERT_FAILURE(test, "Register device failed: %d", ret); + } + + test->priv = input_dev; + + return 0; +} + +static void input_test_exit(struct kunit *test) +{ + struct input_dev *input_dev = test->priv; + + input_unregister_device(input_dev); + input_free_device(input_dev); +} + +static void input_test_poll(struct input_dev *input) { } + +static void input_test_polling(struct kunit *test) +{ + struct input_dev *input_dev = test->priv; + + /* Must fail because a poll handler has not been set-up yet */ + KUNIT_ASSERT_EQ(test, input_get_poll_interval(input_dev), -EINVAL); + + KUNIT_ASSERT_EQ(test, input_setup_polling(input_dev, input_test_poll), 0); + + input_set_poll_interval(input_dev, POLL_INTERVAL); + + /* Must succeed because poll handler was set-up and poll interval set */ + KUNIT_ASSERT_EQ(test, input_get_poll_interval(input_dev), POLL_INTERVAL); +} + +static void input_test_timestamp(struct kunit *test) +{ + const ktime_t invalid_timestamp = ktime_set(0, 0); + struct input_dev *input_dev = test->priv; + ktime_t *timestamp, time; + + timestamp = input_get_timestamp(input_dev); + time = timestamp[INPUT_CLK_MONO]; + + /* The returned timestamp must always be valid */ + KUNIT_ASSERT_EQ(test, ktime_compare(time, invalid_timestamp), 1); + + time = ktime_get(); + input_set_timestamp(input_dev, time); + + timestamp = input_get_timestamp(input_dev); + /* The timestamp must be the same than set before */ + KUNIT_ASSERT_EQ(test, ktime_compare(timestamp[INPUT_CLK_MONO], time), 0); +} + +static void input_test_match_device_id(struct kunit *test) +{ + struct input_dev *input_dev = test->priv; + struct input_device_id id; + + /* + * Must match when the input device bus, vendor, product, version + * and events capable of handling are the same and fail to match + * otherwise. + */ + id.flags = INPUT_DEVICE_ID_MATCH_BUS; + id.bustype = BUS_VIRTUAL; + KUNIT_ASSERT_TRUE(test, input_match_device_id(input_dev, &id)); + + id.bustype = BUS_I2C; + KUNIT_ASSERT_FALSE(test, input_match_device_id(input_dev, &id)); + + id.flags = INPUT_DEVICE_ID_MATCH_VENDOR; + id.vendor = 1; + KUNIT_ASSERT_TRUE(test, input_match_device_id(input_dev, &id)); + + id.vendor = 2; + KUNIT_ASSERT_FALSE(test, input_match_device_id(input_dev, &id)); + + id.flags = INPUT_DEVICE_ID_MATCH_PRODUCT; + id.product = 1; + KUNIT_ASSERT_TRUE(test, input_match_device_id(input_dev, &id)); + + id.product = 2; + KUNIT_ASSERT_FALSE(test, input_match_device_id(input_dev, &id)); + + id.flags = INPUT_DEVICE_ID_MATCH_VERSION; + id.version = 1; + KUNIT_ASSERT_TRUE(test, input_match_device_id(input_dev, &id)); + + id.version = 2; + KUNIT_ASSERT_FALSE(test, input_match_device_id(input_dev, &id)); + + id.flags = INPUT_DEVICE_ID_MATCH_EVBIT; + __set_bit(EV_KEY, id.evbit); + KUNIT_ASSERT_TRUE(test, input_match_device_id(input_dev, &id)); + + __set_bit(EV_ABS, id.evbit); + KUNIT_ASSERT_FALSE(test, input_match_device_id(input_dev, &id)); +} + +static struct kunit_case input_tests[] = { + KUNIT_CASE(input_test_polling), + KUNIT_CASE(input_test_timestamp), + KUNIT_CASE(input_test_match_device_id), + { /* sentinel */ } +}; + +static struct kunit_suite input_test_suite = { + .name = "input_core", + .init = input_test_init, + .exit = input_test_exit, + .test_cases = input_tests, +}; + +kunit_test_suite(input_test_suite); + +MODULE_AUTHOR("Javier Martinez Canillas <javierm(a)redhat.com>"); +MODULE_LICENSE("GPL"); base-commit: 3a93e40326c8f470e71d20b4c42d36767450f38f -- 2.40.0

1 year, 1 month

4
4
0 0

[PATCH 0/2] KVM: PPC: support kvm selftests

by Nicholas Piggin

Hi, This series adds initial KVM selftests support for powerpc (64-bit, BookS). It spans 3 maintainers but it does not really affect arch/powerpc, and it is well contained in selftests code, just touches some makefiles and a tiny bit headers so conflicts should be unlikely and trivial. I guess Paolo is the best point to merge these, if no comments or objections? Thanks, Nick Nicholas Piggin (2): KVM: PPC: Add kvm selftests support for powerpc KVM: PPC: Add basic framework tests for kvm selftests tools/testing/selftests/kvm/Makefile | 14 + .../selftests/kvm/include/kvm_util_base.h | 13 + .../selftests/kvm/include/powerpc/hcall.h | 22 ++ .../selftests/kvm/include/powerpc/processor.h | 13 + tools/testing/selftests/kvm/lib/kvm_util.c | 10 + .../testing/selftests/kvm/lib/powerpc/hcall.c | 45 +++ .../selftests/kvm/lib/powerpc/processor.c | 355 ++++++++++++++++++ .../testing/selftests/kvm/lib/powerpc/ucall.c | 30 ++ .../testing/selftests/kvm/powerpc/null_test.c | 186 +++++++++ .../selftests/kvm/powerpc/rtas_hcall.c | 146 +++++++ 10 files changed, 834 insertions(+) create mode 100644 tools/testing/selftests/kvm/include/powerpc/hcall.h create mode 100644 tools/testing/selftests/kvm/include/powerpc/processor.h create mode 100644 tools/testing/selftests/kvm/lib/powerpc/hcall.c create mode 100644 tools/testing/selftests/kvm/lib/powerpc/processor.c create mode 100644 tools/testing/selftests/kvm/lib/powerpc/ucall.c create mode 100644 tools/testing/selftests/kvm/powerpc/null_test.c create mode 100644 tools/testing/selftests/kvm/powerpc/rtas_hcall.c -- 2.37.2

1 year, 1 month

3
10
0 0

[PATCH v5 0/8] Support ROHM BU27034 ALS sensor

by Matti Vaittinen

Support ROHM BU27034 ALS sensor This series adds support for ROHM BU27034 Ambient Light Sensor. The BU27034 has configurable gain and measurement (integration) time settings. Both of these have inversely proportional relation to the sensor's intensity channel scale. Many users only set the scale, which means that many drivers attempt to 'guess' the best gain+time combination to meet the scale. Usually this is the biggest integration time which allows setting the requested scale. Typically, increasing the integration time has better accuracy than increasing the gain, which often amplifies the noise as well as the real signal. However, there may be cases where more responsive sensors are needed. So, in some cases the longest integration times may not be what the user prefers. The driver has no way of knowing this. Hence, the approach taken by this series is to allow user to set both the scale and the integration time with following logic: 1. When scale is set, the existing integration time is tried to be maintained as a first priority. 1a) If the requested scale can't be met by current time, then also other time + gain combinations are searched. If scale can be met by some other integration time, then the new time may be applied. If the time setting is common for all channels, then also other channels must be able to maintain their scale with this new time (by changing their gain). The new times are scanned in the order of preference (typically the longest times first). 1b) If the requested scale can be met using current time, then only the gain for the channel is changed. 2. When the integration time change - scale is tried to be maintained. When integration time change is requested also gain for all impacted channels is adjusted so that the scale is not changed, or is chaned as little as possible. This is different from the RFCv1 where the request was rejected if suitable gain couldn't be found for some channel(s). This logic is simple. When total gain (either caused by time or hw-gain) is doubled, the scale gets halved. Also, the supported times are given a 'multiplier' value which tells how much they increase the total gain. However, when I wrote this logic in bu27034 driver, I made quite a few errors on the way - and driver got pretty big. As I am writing drivers for two other sensors (RGB C/IR + flicker BU27010 and RGB C/IR BU27008) with similar gain-time-scale logic I thought that adding common helpers for these computations might be wise. I hope this way all the bugs will be concentrated in one place and not in every individual driver ;) Hence, this series also intriduces IIO gain-time-scale helpers (abbreviated as gts-helpers) + a couple of KUnit tests for the most hairy parts. Speaking of which - testing the devm interfaces requires a 'dummy device'. There were neat helpers in DRM tests for creating and freeing such a device. This series moves those helpers to more generic location. What is worth noting is that there is something similar ongoing in the CCF territory: https://lore.kernel.org/all/20230302013822.1808711-1-sboyd@kernel.org/ These efforts should be somehow coordinated in order to avoid any avoid conflicts. Finally, these added helpers do provide some value also for drivers which only: a) allow gain change or b) allow changing both the time and gain while trying to maintain the scale. For a) we provide the gain - selector (register value) table format + selector to gain look-ups, gain <-> scale conversions and the available scales helpers. For latter case we also provide the time-tables, and actually all the APIs should be usable by setting the time multiplier to 1. (not testeted thoroughly though). The patch 1/8 introduces the helpers for creating/dropping a test device for devm-tests. It can be applied alone. The patches 2/8 (convert DRM tests to use new helper) depends on patch 1/8 but is othervice not part of this series. It can be applied to DRM tree after the dependency to 1/8 is handled. The patch 5/8 (IIO GTS tests) also depends on the patch 1/8 (and also other patches in the series). Rest of the series should be Ok to be applied with/without the patches 1/8, 2/8, 5/8 - although the 5/8 would be "nice to have" together with the rest of the series for the testability reasons. Revision history: v4 => v5: Mostly fixes to review comments from Andy and Jonathan. - more accurate change-log in individual patches - copy code from DRM test helper instead of moving it to simplify merging - document all exported GTS helpers. - inline a few GTS helpers - use again Milli lux for the bu27034 with RAW IIO_LIGHT channel and scale - Fix bug from added in v4 bu27034 time setting. v3 => v4: (Still mostly fixes to review comments from Andy and Jonathan) - more accurate change-log in individual patches - dt-binding and maintainer patches unchanged. - dropped unused helpers and converted ones currently used only internally to static. - extracted "dummy device" creation helpers from DRM tests. - added tests for devm APIs - dropped scale for PROCESSED channel in BU27034 and converted mLux values to luxes - dropped channel 2 GAIN setting which can't be done due to HW limitations. v2 => v3: (Mostly fixes to review comments from Andy and Jonathan) - dt-binding and maintainer patches unchanged. - iio-gts-helper tests: Use namespaces - iio-gts-helpers + bu27034 plenty of changes. See more comprehensive changelog in individual patches. RFCv1 => v2: dt-bindings: - Fix binding file name and id by using comma instead of a hyphen to separate the vendor and part names. gts-helpers: - fix include guardian - Improve kernel doc for iio_init_iio_gts. - Add iio_gts_scale_to_total_gain - Add iio_gts_total_gain_to_scale - Fix review comments from Jonathan - add documentation to few functions - replace 0xffffffffffffffffLLU by U64_MAX - some styling fixes - drop unnecessary NULL checks - order function arguments by in / out purpose - drop GAIN_SCALE_ITIME_MS() - Add helpers for available scales and times - Rename to iio-gts-helpers gts-tests: - add tests for available scales/times helpers - adapt to renamed iio-gts-helpers.h header bu27034-driver: - (really) protect read-only registers - fix get and set gain - buffered mode - Protect the whole sequences including meas_en/meas_dis to avoid messing up the enable / disable order - typofixes / doc improvements - change dropped GAIN_SCALE_ITIME_MS() to GAIN_SCALE_ITIME_US() - use more accurate scale for lux channel (milli lux) - provide available scales / integration times (using helpers). - adapt to renamed iio-gts-helpers.h file - bu27034 - longer lines in Kconfig - Drop bu27034_meas_en and bu27034_meas_dis wrappers. - Change device-name from bu27034-als to bu27034 MAINTAINERS: - Add iio-list --- Matti Vaittinen (8): drivers: kunit: Generic helpers for test device creation drm/tests: helpers: Use generic helpers dt-bindings: iio: light: Support ROHM BU27034 iio: light: Add gain-time-scale helpers iio: test: test gain-time-scale helpers MAINTAINERS: Add IIO gain-time-scale helpers iio: light: ROHM BU27034 Ambient Light Sensor MAINTAINERS: Add ROHM BU27034 .../bindings/iio/light/rohm,bu27034.yaml | 46 + MAINTAINERS | 14 + drivers/base/test/Kconfig | 5 + drivers/base/test/Makefile | 2 + drivers/base/test/test_kunit_device.c | 83 + drivers/gpu/drm/Kconfig | 2 + .../gpu/drm/tests/drm_client_modeset_test.c | 5 +- drivers/gpu/drm/tests/drm_kunit_helpers.c | 69 - drivers/gpu/drm/tests/drm_managed_test.c | 5 +- drivers/gpu/drm/tests/drm_modes_test.c | 5 +- drivers/gpu/drm/tests/drm_probe_helper_test.c | 5 +- drivers/gpu/drm/vc4/Kconfig | 1 + drivers/gpu/drm/vc4/tests/vc4_mock.c | 3 +- .../gpu/drm/vc4/tests/vc4_test_pv_muxing.c | 9 +- drivers/iio/Kconfig | 3 + drivers/iio/Makefile | 1 + drivers/iio/industrialio-gts-helper.c | 1064 ++++++++++++ drivers/iio/light/Kconfig | 14 + drivers/iio/light/Makefile | 1 + drivers/iio/light/rohm-bu27034.c | 1482 +++++++++++++++++ drivers/iio/test/Kconfig | 14 + drivers/iio/test/Makefile | 1 + drivers/iio/test/iio-test-gts.c | 542 ++++++ include/drm/drm_kunit_helpers.h | 7 +- include/kunit/platform_device.h | 13 + include/linux/iio/iio-gts-helper.h | 206 +++ 26 files changed, 3515 insertions(+), 87 deletions(-) create mode 100644 Documentation/devicetree/bindings/iio/light/rohm,bu27034.yaml create mode 100644 drivers/base/test/test_kunit_device.c create mode 100644 drivers/iio/industrialio-gts-helper.c create mode 100644 drivers/iio/light/rohm-bu27034.c create mode 100644 drivers/iio/test/iio-test-gts.c create mode 100644 include/kunit/platform_device.h create mode 100644 include/linux/iio/iio-gts-helper.h base-commit: eeac8ede17557680855031c6f305ece2378af326 -- 2.39.2 -- Matti Vaittinen, Linux device drivers ROHM Semiconductors, Finland SWDC Kiviharjunlenkki 1E 90220 OULU FINLAND ~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~ Simon says - in Latin please. ~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~ Thanks to Simon Glass for the translation =]

1 year, 1 month

9
50
0 0

[KTAP V2 PATCH] ktap_v2: allow prefix to KTAP lines

by Rae Moar

Change the KTAP v2 spec to allow variable prefixes to KTAP lines, instead of fixed indentation of two spaces. However, the prefix must be constant on the same level of testing (besides unknown lines). This was proposed by Tim Bird in 2021 and then supported by Frank Rowand in 2022 (see link below). Link: https://lore.kernel.org/all/bc6e9ed7-d98b-c4da-2a59-ee0915c18f10@gmail.com/ As cited in the original proposal, it is useful in some Fuego tests to include an identifier in the prefix. This is an example: KTAP version 1 1..2 [batch_id 4] KTAP version 1 [batch_id 4] 1..2 [batch_id 4] ok 1 cyclictest with 1000 cycles [batch_id 4] # problem setting CLOCK_REALTIME [batch_id 4] not ok 2 cyclictest with CLOCK_REALTIME not ok 1 check realtime [batch_id 4] KTAP version 1 [batch_id 4] 1..1 [batch_id 4] ok 1 IOZone read/write 4k blocks ok 2 check I/O performance Here is a link to a version of the KUnit parser that is able to parse variable length prefixes for KTAP version 2. Note that the prefix must be constant at the same level of testing. Link: https://kunit-review.googlesource.com/c/linux/+/5710 Signed-off-by: Rae Moar <rmoar(a)google.com> --- This idea has already been proposed but I wanted to potentially restart the discussion by demonstrating this change can by implemented in the KUnit parser. Let me know what you think. Note: this patch is based on Frank's ktap_spec_version_2 branch. Documentation/dev-tools/ktap.rst | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-) diff --git a/Documentation/dev-tools/ktap.rst b/Documentation/dev-tools/ktap.rst index ff77f4aaa6ef..ac61fdd97096 100644 --- a/Documentation/dev-tools/ktap.rst +++ b/Documentation/dev-tools/ktap.rst @@ -192,9 +192,11 @@ starting with another KTAP version line and test plan, and end with the overall result. If one of the subtests fail, for example, the parent test should also fail. -Additionally, all lines in a subtest should be indented. One level of -indentation is two spaces: " ". The indentation should begin at the version -line and should end before the parent test's result line. +Additionally, all lines in a subtest should be indented. The standard for one +level of indentation is two spaces: " ". However, any prefix for indentation +is allowed as long as the prefix is consistent throughout that level of +testing. The indentation should begin at the version line and should end +before the parent test's result line. "Unknown lines" are not considered to be lines in a subtest and thus are allowed to be either indented or not indented. @@ -229,6 +231,19 @@ An example format with multiple levels of nested testing: not ok 1 example_test_1 ok 2 example_test_2 +An example of a test with two nested subtests using prefixes: + +:: + + KTAP version 2 + 1..1 + [prefix_1] KTAP version 2 + [prefix_1] 1..2 + [prefix_1] ok 1 test_1 + [prefix_1] ok 2 test_2 + # example passed + ok 1 example + Major differences between TAP and KTAP -------------------------------------- base-commit: 906f02e42adfbd5ae70d328ee71656ecb602aaf5 -- 2.40.0.rc1.284.g88254d51c5-goog

1 year, 1 month

2
3
0 0

[KTAP V2 PATCH] ktap_v2: add recognized test name line

by Rae Moar

Add recognition of the test name line ("# Subtest: <name>") to the KTAP v2 spec. The purpose of this line is to declare the name of a test before its results. This functionality is especially useful when trying to parse test results incrementally and when interpretting results after a crash. This line is already compliant with KTAP v1 as it is interpretted as a diagnostic line by parsers. Additionally, the line is currently used by KUnit tests and was derived from the TAP 14 spec: https://testanything.org/tap-version-14-specification.html. Recognition of this line would create an accepted way for different test frameworks to declare the name of a test before its results. The proposed location for this line is between the version line and the test plan line. This location ensures that the line would not be accidentally parsed as a subtest's diagnostic lines. Note this proposed location would be a slight differentiation from KTAP v1. Example of test name line: KTAP version 2 # Subtest: main_test 1..1 KTAP version 2 # Subtest: sub_test 1..2 ok 1 test_1 ok 2 test_2 ok 1 sub_test Here is a link to a version of the KUnit parser that is able to parse the test name line for KTAP version 2. Note this includes a test name line for the main level of KTAP. Link: https://kunit-review.googlesource.com/c/linux/+/5709 Signed-off-by: Rae Moar <rmoar(a)google.com> --- This is a RFC. I would like to know what people think and use this as a platform for discussion on KTAP v2. Note: this patch is based on Frank's ktap_spec_version_2 branch. Documentation/dev-tools/ktap.rst | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) diff --git a/Documentation/dev-tools/ktap.rst b/Documentation/dev-tools/ktap.rst index ff77f4aaa6ef..9c7ed66d9f77 100644 --- a/Documentation/dev-tools/ktap.rst +++ b/Documentation/dev-tools/ktap.rst @@ -28,8 +28,7 @@ KTAP output is built from four different types of lines: In general, valid KTAP output should also form valid TAP output, but some information, in particular nested test results, may be lost. Also note that there is a stagnant draft specification for TAP14, KTAP diverges from this in -a couple of places (notably the "Subtest" header), which are described where -relevant later in this document. +a couple of places, which are described where relevant later in this document. Version lines ------------- @@ -44,8 +43,8 @@ For example: - "TAP version 14" Note that, in KTAP, subtests also begin with a version line, which denotes the -start of the nested test results. This differs from TAP14, which uses a -separate "Subtest" line. +start of the nested test results. This differs from TAP14, which uses only a +"Subtest" line. While, going forward, "KTAP version 2" should be used by compliant tests, it is expected that most parsers and other tooling will accept the other versions @@ -166,6 +165,12 @@ even if they do not start with a "#": this is to capture any other useful kernel output which may help debug the test. It is nevertheless recommended that tests always prefix any diagnostic output they have with a "#" character. +One recognized diagnostic line is the "# Subtest: <name>" line. This line +is used to declare the name of a test before subtest results are printed. This +is helpful for parsing and for providing context during crashes. As a rule, +this line is placed after the version line and before the plan line. Note +this line can be used for the main test, as well as subtests. + Unknown lines ------------- @@ -206,6 +211,7 @@ An example of a test with two nested subtests: KTAP version 2 1..1 KTAP version 2 + # Subtest: example 1..2 ok 1 test_1 not ok 2 test_2 @@ -219,6 +225,7 @@ An example format with multiple levels of nested testing: KTAP version 2 1..2 KTAP version 2 + # Subtest: example_test_1 1..2 KTAP version 2 1..2 @@ -245,7 +252,7 @@ allows an arbitrary number of tests to be nested no yes The TAP14 specification does permit nested tests, but instead of using another nested version line, uses a line of the form -"Subtest: <name>" where <name> is the name of the parent test. +"Subtest: <name>" where <name> is the name of the parent test as discussed above. Example KTAP output -------------------- @@ -254,6 +261,7 @@ Example KTAP output KTAP version 2 1..1 KTAP version 2 + # Subtest: main_test 1..3 KTAP version 2 1..1 @@ -266,6 +274,7 @@ Example KTAP output ok 2 test_2 ok 2 example_test_2 KTAP version 2 + # Subtest: example_test_3 1..3 ok 1 test_1 # test_2: FAIL base-commit: 906f02e42adfbd5ae70d328ee71656ecb602aaf5 -- 2.40.0.rc1.284.g88254d51c5-goog

1 year, 1 month

3
6
0 0

Re: [linus:master] [selftests/memfd] 11f75a0144: kernel-selftests.memfd.run_fuse_test.sh.fail

by Daniel Verkamp

On Fri, Mar 31, 2023 at 8:05 AM kernel test robot <yujie.liu(a)intel.com> wrote: > > Hello, > > kernel test robot noticed kernel-selftests.memfd.run_fuse_test.sh.fail due to commit (built with gcc-11): > > commit: 11f75a01448f1b7a739e75dbd8f17b844fcfc510 ("selftests/memfd: add tests for MFD_NOEXEC_SEAL MFD_EXEC") > https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git master > > in testcase: kernel-selftests > version: kernel-selftests-x86_64-d4cf28ee-1_20230110 > with following parameters: > > group: group-02 > > test-description: The kernel contains a set of "self tests" under the tools/testing/selftests/ directory. These are intended to be small unit tests to exercise individual code paths in the kernel. > test-url: https://www.kernel.org/doc/Documentation/kselftest.txt > > on test machine: 4 threads Intel(R) Xeon(R) CPU E3-1225 v5 @ 3.30GHz (Skylake) with 16G memory > > caused below changes (please refer to attached dmesg/kmsg for entire log/backtrace): > > > # selftests: memfd: run_fuse_test.sh > # Aborted > not ok 2 selftests: memfd: run_fuse_test.sh # exit=134 > > $ ./run_fuse_test.sh > opening: ./mnt/memfd > 8 != 40 = GET_SEALS(4) > Aborted Hi Jeff, I think this is caused by test_sysctl() in memfd_test, which sets /proc/sys/vm/memfd_noexec to a non-zero value and does not restore it at the end of the test. If fuse_test runs after that, it will unexpectedly get F_SEAL_EXEC in its memfd seals in addition to the F_SEAL_WRITE that it intended to add. I'm not sure how kernel selftests normally perform cleanup (e.g. an atexit() hook to make sure it cleans up if a test fails?), but at least we should probably set /proc/sys/vm/memfd_noexec back to its original value after test_sysctl(). Thanks, -- Daniel

1 year, 1 month

2
1
0 0

[PATCH bpf-next] selftests/bpf: Fix conflicts with built-in functions in bench_local_storage_create

by James Hilliard

The fork function in gcc is considered a built in function due to being used by libgcov when building with gnu extensions. Rename fork to sched_process_fork to prevent this conflict. See details: https://github.com/gcc-mirror/gcc/commit/d1c38823924506d389ca58d02926ace21b… https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82457 Fixes the following error: In file included from progs/bench_local_storage_create.c:6: progs/bench_local_storage_create.c:43:14: error: conflicting types for built-in function 'fork'; expected 'int(void)' [-Werror=builtin-declaration-mismatch] 43 | int BPF_PROG(fork, struct task_struct *parent, struct task_struct *child) | ^~~~ Fixes: cbe9d93d58b1 ("selftests/bpf: Add bench for task storage creation") Signed-off-by: James Hilliard <james.hilliard1(a)gmail.com> Cc: Martin KaFai Lau <martin.lau(a)kernel.org> --- tools/testing/selftests/bpf/benchs/bench_local_storage_create.c | 2 +- tools/testing/selftests/bpf/progs/bench_local_storage_create.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/bpf/benchs/bench_local_storage_create.c b/tools/testing/selftests/bpf/benchs/bench_local_storage_create.c index abb0321d4f34..cff703f90e95 100644 --- a/tools/testing/selftests/bpf/benchs/bench_local_storage_create.c +++ b/tools/testing/selftests/bpf/benchs/bench_local_storage_create.c @@ -95,7 +95,7 @@ static void setup(void) exit(1); } } else { - if (!bpf_program__attach(skel->progs.fork)) { + if (!bpf_program__attach(skel->progs.sched_process_fork)) { fprintf(stderr, "Error attaching bpf program\n"); exit(1); } diff --git a/tools/testing/selftests/bpf/progs/bench_local_storage_create.c b/tools/testing/selftests/bpf/progs/bench_local_storage_create.c index 7c851c9d5e47..e4bfbba6c193 100644 --- a/tools/testing/selftests/bpf/progs/bench_local_storage_create.c +++ b/tools/testing/selftests/bpf/progs/bench_local_storage_create.c @@ -40,7 +40,7 @@ int BPF_PROG(kmalloc, unsigned long call_site, const void *ptr, } SEC("tp_btf/sched_process_fork") -int BPF_PROG(fork, struct task_struct *parent, struct task_struct *child) +int BPF_PROG(sched_process_fork, struct task_struct *parent, struct task_struct *child) { struct storage *stg; -- 2.34.1

1 year, 1 month

2
1
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror March 2023