Hi All,
In TDX guest, the attestation process is used to verify the TDX guest
trustworthiness to other entities before provisioning secrets to the
guest.
The TDX guest attestation process consists of two steps:
1. TDREPORT generation
2. Quote generation.
The First step (TDREPORT generation) involves getting the TDX guest
measurement data in the format of TDREPORT which is further used to
validate the authenticity of the TDX guest. The second step involves
sending the TDREPORT to a Quoting Enclave (QE) server to generate a
remotely verifiable Quote. TDREPORT by design can only be verified on
the local platform. To support remote verification of the TDREPORT,
TDX leverages Intel SGX Quoting Enclave to verify the TDREPORT
locally and convert it to a remotely verifiable Quote. Although
attestation software can use communication methods like TCP/IP or
vsock to send the TDREPORT to QE, not all platforms support these
communication models. So TDX GHCI specification [1] defines a method
for Quote generation via hypercalls. Please check the discussion from
Google [2] and Alibaba [3] which clarifies the need for hypercall based
Quote generation support. This patch set adds this support.
Support for TDREPORT generation already exists in the TDX guest driver.
This patchset extends the same driver to add the Quote generation
support.
Following are the details of the patch set:
Patch 1/3 -> Adds event notification IRQ support.
Patch 2/3 -> Adds Quote generation support.
Patch 3/3 -> Adds selftest support for Quote generation feature.
[1] https://cdrdv2.intel.com/v1/dl/getContent/726790, section titled "TDG.VP.VMCALL<GetQuote>".
[2] https://lore.kernel.org/lkml/CAAYXXYxxs2zy_978GJDwKfX5Hud503gPc8=1kQ-+JwG_k…
[3] https://lore.kernel.org/lkml/a69faebb-11e8-b386-d591-dbd08330b008@linux.ali…
Kuppuswamy Sathyanarayanan (3):
x86/tdx: Add TDX Guest event notify interrupt support
virt: tdx-guest: Add Quote generation support
selftests/tdx: Test GetQuote TDX attestation feature
Documentation/virt/coco/tdx-guest.rst | 11 ++
arch/x86/coco/tdx/tdx.c | 194 +++++++++++++++++++
arch/x86/include/asm/tdx.h | 8 +
drivers/virt/coco/tdx-guest/tdx-guest.c | 175 ++++++++++++++++-
include/uapi/linux/tdx-guest.h | 44 +++++
tools/testing/selftests/tdx/tdx_guest_test.c | 65 ++++++-
6 files changed, 490 insertions(+), 7 deletions(-)
--
2.34.1
This is to add Intel VT-d nested translation based on IOMMUFD nesting
infrastructure. As the iommufd nesting infrastructure series[1], iommu
core supports new ops to report iommu hardware information, allocate
domains with user data and invalidate stage-1 IOTLB when there is mapping
changed in stage-1 page table. The data required in the three paths are
vendor-specific, so
1) IOMMU_HWPT_TYPE_VTD_S1 is defined for the Intel VT-d stage-1 page
table, it will be used in the stage-1 domain allocation and IOTLB
syncing path. struct iommu_hwpt_vtd_s1 is defined to pass user_data
for the Intel VT-d stage-1 domain allocation.
struct iommu_hwpt_vtd_s1_invalidate is defined to pass the data for
the Intel VT-d stage-1 IOTLB invalidation.
2) IOMMU_HW_INFO_TYPE_INTEL_VTD and struct iommu_hw_info_vtd are defined
to report iommu hardware information for Intel VT-d.
With above IOMMUFD extensions, the intel iommu driver implements the three
paths to support nested translation.
The first Intel platform supporting nested translation is Sapphire
Rapids which, unfortunately, has a hardware errata [2] requiring special
treatment. This errata happens when a stage-1 page table page (either
level) is located in a stage-2 read-only region. In that case the IOMMU
hardware may ignore the stage-2 RO permission and still set the A/D bit
in stage-1 page table entries during page table walking.
A flag IOMMU_HW_INFO_VTD_ERRATA_772415_SPR17 is introduced to report
this errata to userspace. With that restriction the user should either
disable nested translation to favor RO stage-2 mappings or ensure no
RO stage-2 mapping to enable nested translation.
Intel-iommu driver is armed with necessary checks to prevent such mix
in patch12 of this series.
Qemu currently does add RO mappings though. The vfio agent in Qemu
simply maps all valid regions in the GPA address space which certainly
includes RO regions e.g. vbios.
In reality we don't know a usage relying on DMA reads from the BIOS
region. Hence finding a way to skip RO regions (e.g. via a discard manager)
in Qemu might be an acceptable tradeoff. The actual change needs more
discussion in Qemu community. For now we just hacked Qemu to test.
Complete code can be found in [3], corresponding QEMU could can be found
in [4].
[1] https://lore.kernel.org/linux-iommu/20230724110406.107212-1-yi.l.liu@intel.…
[2] https://www.intel.com/content/www/us/en/content-details/772415/content-deta…
[3] https://github.com/yiliu1765/iommufd/tree/iommufd_nesting
[4] https://github.com/yiliu1765/qemu/tree/wip/iommufd_rfcv4_nesting
Change log:
v4:
- Remove ascii art tables (Jason)
- Drop EMT (Tina, Jason)
- Drop MTS and related definitions (Kevin)
- Rename macro IOMMU_VTD_PGTBL_ to IOMMU_VTD_S1_ (Kevin)
- Rename struct iommu_hwpt_intel_vtd_ to iommu_hwpt_vtd_ (Kevin)
- Rename struct iommu_hwpt_intel_vtd to iommu_hwpt_vtd_s1 (Kevin)
- Put the vendor specific hwpt alloc data structure before enuma iommu_hwpt_type (Kevin)
- Do not trim the higher page levels of S2 domain in nested domain attachment as the
S2 domain may have been used independently. (Kevin)
- Remove the first-stage pgd check against the maximum address of s2_domain as hw
can check it anyhow. It makes sense to check every pfns used in the stage-1 page
table. But it cannot make it. So just leave it to hw. (Kevin)
- Split the iotlb flush part into an order of uapi, helper and callback implementation (Kevin)
- Change the policy of VT-d nesting errata, disallow RO mapping once a domain is used
as parent domain of a nested domain. This removes the nested_users counting. (Kevin)
- Minor fix for "make htmldocs"
v3: https://lore.kernel.org/linux-iommu/20230511145110.27707-1-yi.l.liu@intel.c…
- Further split the patches into an order of adding helpers for nested
domain, iotlb flush, nested domain attachment and nested domain allocation
callback, then report the hw_info to userspace.
- Add batch support in cache invalidation from userspace
- Disallow nested translation usage if RO mappings exists in stage-2 domain
due to errata on readonly mappings on Sapphire Rapids platform.
v2: https://lore.kernel.org/linux-iommu/20230309082207.612346-1-yi.l.liu@intel.…
- The iommufd infrastructure is split to be separate series.
v1: https://lore.kernel.org/linux-iommu/20230209043153.14964-1-yi.l.liu@intel.c…
Regards,
Yi Liu
Lu Baolu (5):
iommu/vt-d: Extend dmar_domain to support nested domain
iommu/vt-d: Add helper for nested domain allocation
iommu/vt-d: Add helper to setup pasid nested translation
iommu/vt-d: Add nested domain allocation
iommu/vt-d: Disallow nesting on domains with read-only mappings
Yi Liu (7):
iommufd: Add data structure for Intel VT-d stage-1 domain allocation
iommu/vt-d: Make domain attach helpers to be extern
iommu/vt-d: Set the nested domain to a device
iommufd: Add data structure for Intel VT-d stage-1 cache invalidation
iommu/vt-d: Make iotlb flush helpers to be extern
iommu/vt-d: Add iotlb flush for nested domain
iommu/vt-d: Implement hw_info for iommu capability query
drivers/iommu/intel/Makefile | 2 +-
drivers/iommu/intel/iommu.c | 80 +++++++++++++---
drivers/iommu/intel/iommu.h | 55 +++++++++--
drivers/iommu/intel/nested.c | 174 +++++++++++++++++++++++++++++++++++
drivers/iommu/intel/pasid.c | 127 +++++++++++++++++++++++++
drivers/iommu/intel/pasid.h | 2 +
drivers/iommu/iommufd/main.c | 6 ++
include/linux/iommu.h | 1 +
include/uapi/linux/iommufd.h | 124 +++++++++++++++++++++++++
9 files changed, 549 insertions(+), 22 deletions(-)
create mode 100644 drivers/iommu/intel/nested.c
--
2.34.1
asm/current.h is included by some assembly files (either directly, or
indirectly). This works on some architectures (such as x86), as their
implementation of current.h is careful to not include any C, but the
asm-generic version includes linux/thread-info.h unconditionally, which
leads to errors when either C code or non-asm-compatible preprocessor
directives are included.
Just wrap the contents behind an #ifndef __ASSEMBLY__ to avoid any C
code making its way in.
Signed-off-by: David Gow <davidgow(a)google.com>
---
This is requrired for patch #2 here, as UML uses this asm-generic
header, but works with x86 assembly files which are expecting the x86
current.h, which is assembly-friendly.
---
include/asm-generic/current.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/include/asm-generic/current.h b/include/asm-generic/current.h
index 3a2e224b9fa0..9c2aeecbd05a 100644
--- a/include/asm-generic/current.h
+++ b/include/asm-generic/current.h
@@ -2,9 +2,11 @@
#ifndef __ASM_GENERIC_CURRENT_H
#define __ASM_GENERIC_CURRENT_H
+#ifndef __ASSEMBLY__
#include <linux/thread_info.h>
#define get_current() (current_thread_info()->task)
#define current get_current()
+#endif
#endif /* __ASM_GENERIC_CURRENT_H */
--
2.41.0.255.g8b1d071c50-goog
Adds a check to verify if the rtc device file is valid or not
and prints a useful error message if the file is not accessible.
Signed-off-by: Atul Kumar Pant <atulpant.linux(a)gmail.com>
---
changes since v4:
Updated the commit message.
changes since v3:
Added Linux-kselftest and Linux-kernel mailing lists.
changes since v2:
Changed error message when rtc file does not exist.
changes since v1:
Removed check for uid=0
If rtc file is invalid, then exit the test.
tools/testing/selftests/rtc/rtctest.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/tools/testing/selftests/rtc/rtctest.c b/tools/testing/selftests/rtc/rtctest.c
index 63ce02d1d5cc..630fef735c7e 100644
--- a/tools/testing/selftests/rtc/rtctest.c
+++ b/tools/testing/selftests/rtc/rtctest.c
@@ -17,6 +17,7 @@
#include <unistd.h>
#include "../kselftest_harness.h"
+#include "../kselftest.h"
#define NUM_UIE 3
#define ALARM_DELTA 3
@@ -419,6 +420,8 @@ __constructor_order_last(void)
int main(int argc, char **argv)
{
+ int ret = -1;
+
switch (argc) {
case 2:
rtc_file = argv[1];
@@ -430,5 +433,11 @@ int main(int argc, char **argv)
return 1;
}
- return test_harness_run(argc, argv);
+ // Run the test if rtc_file is valid
+ if (access(rtc_file, F_OK) == 0)
+ ret = test_harness_run(argc, argv);
+ else
+ ksft_exit_fail_msg("[ERROR]: Cannot access rtc file %s - Exiting\n", rtc_file);
+
+ return ret;
}
--
2.25.1
In busybox, the mktemp requires that the generated filename be
suffixed with at least six consecutive 'X' characters. Otherwise,
it will return an "Invalid argument" error.
Signed-off-by: Hui Min Mina Chou <minachou(a)andestech.com>
---
tools/testing/selftests/filesystems/fat/run_fat_tests.sh | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/testing/selftests/filesystems/fat/run_fat_tests.sh b/tools/testing/selftests/filesystems/fat/run_fat_tests.sh
index 7f35dc3d15df..d61264d4795d 100755
--- a/tools/testing/selftests/filesystems/fat/run_fat_tests.sh
+++ b/tools/testing/selftests/filesystems/fat/run_fat_tests.sh
@@ -12,7 +12,7 @@ set -u
set -o pipefail
BASE_DIR="$(dirname $0)"
-TMP_DIR="$(mktemp -d /tmp/fat_tests_tmp.XXXX)"
+TMP_DIR="$(mktemp -d /tmp/fat_tests_tmp.XXXXXX)"
IMG_PATH="${TMP_DIR}/fat.img"
MNT_PATH="${TMP_DIR}/mnt"
--
2.34.1
We mix up KUNIT_TRIGGER_STATIC_STUB and KUNIT_STATIC_STUB_REDIRECT in
static_stub header. Just correct KUNIT_TRIGGER_STATIC_STUB to
KUNIT_STATIC_STUB_REDIRECT which is documented.
Signed-off-by: Kemeng Shi <shikemeng(a)huaweicloud.com>
---
include/kunit/static_stub.h | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/include/kunit/static_stub.h b/include/kunit/static_stub.h
index 9b80150a5d62..85315c80b303 100644
--- a/include/kunit/static_stub.h
+++ b/include/kunit/static_stub.h
@@ -11,7 +11,7 @@
#if !IS_ENABLED(CONFIG_KUNIT)
/* If CONFIG_KUNIT is not enabled, these stubs quietly disappear. */
-#define KUNIT_TRIGGER_STATIC_STUB(real_fn_name, args...) do {} while (0)
+#define KUNIT_STATIC_STUB_REDIRECT(real_fn_name, args...) do {} while (0)
#else
@@ -30,7 +30,7 @@
* This is a function prologue which is used to allow calls to the current
* function to be redirected by a KUnit test. KUnit tests can call
* kunit_activate_static_stub() to pass a replacement function in. The
- * replacement function will be called by KUNIT_TRIGGER_STATIC_STUB(), which
+ * replacement function will be called by KUNIT_STATIC_STUB_REDIRECT(), which
* will then return from the function. If the caller is not in a KUnit context,
* the function will continue execution as normal.
*
@@ -87,7 +87,7 @@ void __kunit_activate_static_stub(struct kunit *test,
* When activated, calls to real_fn_addr from within this test (even if called
* indirectly) will instead call replacement_addr. The function pointed to by
* real_fn_addr must begin with the static stub prologue in
- * KUNIT_TRIGGER_STATIC_STUB() for this to work. real_fn_addr and
+ * KUNIT_STATIC_STUB_REDIRECT() for this to work. real_fn_addr and
* replacement_addr must have the same type.
*
* The redirection can be disabled again with kunit_deactivate_static_stub().
--
2.30.0
Hi,
This follows the discussion here:
https://lore.kernel.org/linux-kselftest/20230324123157.bbwvfq4gsxnlnfwb@hou…
This shows a couple of inconsistencies with regard to how device-managed
resources are cleaned up. Basically, devm resources will only be cleaned up
if the device is attached to a bus and bound to a driver. Failing any of
these cases, a call to device_unregister will not end up in the devm
resources being released.
We had to work around it in DRM to provide helpers to create a device for
kunit tests, but the current discussion around creating similar, generic,
helpers for kunit resumed interest in fixing this.
This can be tested using the command:
./tools/testing/kunit/kunit.py run --kunitconfig=drivers/base/test/
I added the fix David suggested back in that discussion which does fix
the tests. The SoB is missing, since David didn't provide it back then.
Let me know what you think,
Maxime
Signed-off-by: Maxime Ripard <mripard(a)kernel.org>
---
Changes in v3:
- Reworded the commit logs according to David's feedback
- Rebased on current next
- Link to v2: https://lore.kernel.org/r/20230329-kunit-devm-inconsistencies-test-v2-0-19f…
Changes in v2:
- Use an init function
- Document the tests
- Add a fix for the bugs
- Link to v1: https://lore.kernel.org/r/20230329-kunit-devm-inconsistencies-test-v1-0-c33…
---
David Gow (1):
drivers: base: Free devm resources when unregistering a device
Maxime Ripard (2):
drivers: base: Add basic devm tests for root devices
drivers: base: Add basic devm tests for platform devices
drivers/base/core.c | 11 ++
drivers/base/test/.kunitconfig | 2 +
drivers/base/test/Kconfig | 4 +
drivers/base/test/Makefile | 3 +
drivers/base/test/platform-device-test.c | 220 +++++++++++++++++++++++++++++++
drivers/base/test/root-device-test.c | 108 +++++++++++++++
6 files changed, 348 insertions(+)
---
base-commit: c58c49dd89324b18a812762a2bfa5a0458e4f252
change-id: 20230329-kunit-devm-inconsistencies-test-5e5a7d01e60d
Best regards,
--
Maxime Ripard <mripard(a)kernel.org>
This commit removed an extra check for zero-length ranges, and folded it
into the common validate_range() helper used by all UFFD ioctls.
It failed to notice though that UFFDIO_COPY *only* called validate_range
on the dst range, not the src range. So removing this check actually let
us proceed with zero-length source ranges, eventually hitting a BUG
further down in the call stack.
The correct fix seems clear: call validate_range() on the src range too.
Other ioctls are not affected by this, as they only have one range, not
two (src + dst).
Reported-by: syzbot+42309678e0bc7b32f8e9(a)syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=42309678e0bc7b32f8e9
Signed-off-by: Axel Rasmussen <axelrasmussen(a)google.com>
---
fs/userfaultfd.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/fs/userfaultfd.c b/fs/userfaultfd.c
index 53a7220c4679..36d233759233 100644
--- a/fs/userfaultfd.c
+++ b/fs/userfaultfd.c
@@ -1759,6 +1759,9 @@ static int userfaultfd_copy(struct userfaultfd_ctx *ctx,
sizeof(uffdio_copy)-sizeof(__s64)))
goto out;
+ ret = validate_range(ctx->mm, uffdio_copy.src, uffdio_copy.len);
+ if (ret)
+ goto out;
ret = validate_range(ctx->mm, uffdio_copy.dst, uffdio_copy.len);
if (ret)
goto out;
--
2.41.0.255.g8b1d071c50-goog
The arm64 Guarded Control Stack (GCS) feature provides support for
hardware protected stacks of return addresses, intended to provide
hardening against return oriented programming (ROP) attacks and to make
it easier to gather call stacks for applications such as profiling.
When GCS is active a secondary stack called the Guarded Control Stack is
maintained, protected with a memory attribute which means that it can
only be written with specific GCS operations. When a BL is executed the
value stored in LR is also pushed onto the GCS, and when a RET is
executed the top of the GCS is popped and compared to LR with a fault
being raised if the values do not match. GCS operations may only be
performed on GCS pages, a data abort is generated if they are not.
This series implements support for use of GCS by userspace, along with
support for use of GCS within KVM guests. It does not enable use of GCS
by either EL1 or EL2. Executables are started without GCS and must use
a prctl() to enable it, it is expected that this will be done very early
in application execution by the dynamic linker or other startup code.
x86 has an equivalent feature called shadow stacks, this series depends
on the x86 patches for generic memory management support for the new
guarded/shadow stack page type and shares APIs as much as possible. As
there has been extensive discussion with the wider community around the
ABI for shadow stacks I have as far as practical kept implementation
decisions close to those for x86, anticipating that review would lead to
similar conclusions in the absence of strong reasoning for divergence.
The main divergence I am concious of is that x86 allows shadow stack to
be enabled and disabled repeatedly, freeing the shadow stack for the
thread whenever disabled, while this implementation keeps the GCS
allocated after disable but refuses to reenable it. This is to avoid
races with things actively walking the GCS during a disable, we do
anticipate that some systems will wish to disable GCS at runtime but are
not aware of any demand for subsequently reenabling it.
x86 uses an arch_prctl() to manage enable and disable, since only x86
and S/390 use arch_prctl() a generic prctl() was proposed[1] as part of a
patch set for the equivalent RISC-V zisslpcfi feature which I initially
adopted fairly directly but following review feedback has been reviewed
quite a bit.
There is an open issue with support for CRIU, on x86 this required the
ability to set the GCS mode via ptrace. This series supports
configuring mode bits other than enable/disable via ptrace but it needs
to be confirmed if this is sufficient.
There's a few bits where I'm not convinced with where I've placed
things, in particular the GCS write operation is in the GCS header not
in uaccess.h, I wasn't sure what was clearest there and am probably too
close to the code to have a clear opinion. The reporting of GCS in
/proc/PID/smaps is also a bit awkward.
The series depends on the x86 shadow stack support:
https://lore.kernel.org/lkml/20230227222957.24501-1-rick.p.edgecombe@intel.…
I've rebased this onto v6.5-rc3 but not included it in the series in
order to avoid confusion with Rick's work and cut down the size of the
series, you can see the branch at:
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc.git arm64-gcs
[1] https://lore.kernel.org/lkml/20230213045351.3945824-1-debug@rivosinc.com/
Signed-off-by: Mark Brown <broonie(a)kernel.org>
---
Changes in v3:
- Rebase onto v6.5-rc4.
- Add a GCS barrier on context switch.
- Add a GCS stress test.
- Link to v2: https://lore.kernel.org/r/20230724-arm64-gcs-v2-0-dc2c1d44c2eb@kernel.org
Changes in v2:
- Rebase onto v6.5-rc3.
- Rework prctl() interface to allow each bit to be locked independently.
- map_shadow_stack() now places the cap token based on the size
requested by the caller not the actual space allocated.
- Mode changes other than enable via ptrace are now supported.
- Expand test coverage.
- Various smaller fixes and adjustments.
- Link to v1: https://lore.kernel.org/r/20230716-arm64-gcs-v1-0-bf567f93bba6@kernel.org
---
Mark Brown (36):
prctl: arch-agnostic prctl for shadow stack
arm64: Document boot requirements for Guarded Control Stacks
arm64/gcs: Document the ABI for Guarded Control Stacks
arm64/sysreg: Add new system registers for GCS
arm64/sysreg: Add definitions for architected GCS caps
arm64/gcs: Add manual encodings of GCS instructions
arm64/gcs: Provide copy_to_user_gcs()
arm64/cpufeature: Runtime detection of Guarded Control Stack (GCS)
arm64/mm: Allocate PIE slots for EL0 guarded control stack
mm: Define VM_SHADOW_STACK for arm64 when we support GCS
arm64/mm: Map pages for guarded control stack
KVM: arm64: Manage GCS registers for guests
arm64/gcs: Allow GCS usage at EL0 and EL1
arm64/idreg: Add overrride for GCS
arm64/hwcap: Add hwcap for GCS
arm64/traps: Handle GCS exceptions
arm64/mm: Handle GCS data aborts
arm64/gcs: Context switch GCS state for EL0
arm64/gcs: Allocate a new GCS for threads with GCS enabled
arm64/gcs: Implement shadow stack prctl() interface
arm64/mm: Implement map_shadow_stack()
arm64/signal: Set up and restore the GCS context for signal handlers
arm64/signal: Expose GCS state in signal frames
arm64/ptrace: Expose GCS via ptrace and core files
arm64: Add Kconfig for Guarded Control Stack (GCS)
kselftest/arm64: Verify the GCS hwcap
kselftest/arm64: Add GCS as a detected feature in the signal tests
kselftest/arm64: Add framework support for GCS to signal handling tests
kselftest/arm64: Allow signals tests to specify an expected si_code
kselftest/arm64: Always run signals tests with GCS enabled
kselftest/arm64: Add very basic GCS test program
kselftest/arm64: Add a GCS test program built with the system libc
kselftest/arm64: Add test coverage for GCS mode locking
selftests/arm64: Add GCS signal tests
kselftest/arm64: Add a GCS stress test
kselftest/arm64: Enable GCS for the FP stress tests
Documentation/admin-guide/kernel-parameters.txt | 3 +
Documentation/arch/arm64/booting.rst | 22 +
Documentation/arch/arm64/elf_hwcaps.rst | 3 +
Documentation/arch/arm64/gcs.rst | 225 +++++++++
Documentation/arch/arm64/index.rst | 1 +
Documentation/filesystems/proc.rst | 2 +-
arch/arm64/Kconfig | 19 +
arch/arm64/include/asm/cpufeature.h | 6 +
arch/arm64/include/asm/el2_setup.h | 17 +
arch/arm64/include/asm/esr.h | 28 +-
arch/arm64/include/asm/exception.h | 2 +
arch/arm64/include/asm/gcs.h | 106 ++++
arch/arm64/include/asm/hwcap.h | 1 +
arch/arm64/include/asm/kvm_arm.h | 4 +-
arch/arm64/include/asm/kvm_host.h | 12 +
arch/arm64/include/asm/pgtable-prot.h | 14 +-
arch/arm64/include/asm/processor.h | 7 +
arch/arm64/include/asm/sysreg.h | 20 +
arch/arm64/include/asm/uaccess.h | 42 ++
arch/arm64/include/uapi/asm/hwcap.h | 1 +
arch/arm64/include/uapi/asm/ptrace.h | 8 +
arch/arm64/include/uapi/asm/sigcontext.h | 9 +
arch/arm64/kernel/cpufeature.c | 19 +
arch/arm64/kernel/cpuinfo.c | 1 +
arch/arm64/kernel/entry-common.c | 23 +
arch/arm64/kernel/idreg-override.c | 2 +
arch/arm64/kernel/process.c | 85 ++++
arch/arm64/kernel/ptrace.c | 59 +++
arch/arm64/kernel/signal.c | 237 ++++++++-
arch/arm64/kernel/traps.c | 11 +
arch/arm64/kvm/hyp/include/hyp/sysreg-sr.h | 17 +
arch/arm64/kvm/sys_regs.c | 22 +
arch/arm64/mm/Makefile | 1 +
arch/arm64/mm/fault.c | 78 ++-
arch/arm64/mm/gcs.c | 226 +++++++++
arch/arm64/mm/mmap.c | 17 +-
arch/arm64/tools/cpucaps | 1 +
arch/arm64/tools/sysreg | 55 +++
fs/proc/task_mmu.c | 3 +
include/linux/mm.h | 16 +-
include/linux/syscalls.h | 1 +
include/uapi/asm-generic/unistd.h | 5 +-
include/uapi/linux/elf.h | 1 +
include/uapi/linux/prctl.h | 22 +
kernel/sys.c | 30 ++
kernel/sys_ni.c | 1 +
tools/testing/selftests/arm64/Makefile | 2 +-
tools/testing/selftests/arm64/abi/hwcap.c | 19 +
tools/testing/selftests/arm64/fp/assembler.h | 15 +
tools/testing/selftests/arm64/fp/fpsimd-test.S | 2 +
tools/testing/selftests/arm64/fp/sve-test.S | 2 +
tools/testing/selftests/arm64/fp/za-test.S | 2 +
tools/testing/selftests/arm64/fp/zt-test.S | 2 +
tools/testing/selftests/arm64/gcs/.gitignore | 5 +
tools/testing/selftests/arm64/gcs/Makefile | 23 +
tools/testing/selftests/arm64/gcs/asm-offsets.h | 0
tools/testing/selftests/arm64/gcs/basic-gcs.c | 351 ++++++++++++++
tools/testing/selftests/arm64/gcs/gcs-locking.c | 200 ++++++++
.../selftests/arm64/gcs/gcs-stress-thread.S | 311 ++++++++++++
tools/testing/selftests/arm64/gcs/gcs-stress.c | 532 +++++++++++++++++++++
tools/testing/selftests/arm64/gcs/gcs-util.h | 87 ++++
tools/testing/selftests/arm64/gcs/libc-gcs.c | 372 ++++++++++++++
tools/testing/selftests/arm64/signal/.gitignore | 1 +
.../testing/selftests/arm64/signal/test_signals.c | 17 +-
.../testing/selftests/arm64/signal/test_signals.h | 6 +
.../selftests/arm64/signal/test_signals_utils.c | 32 +-
.../selftests/arm64/signal/test_signals_utils.h | 39 ++
.../arm64/signal/testcases/gcs_exception_fault.c | 59 +++
.../selftests/arm64/signal/testcases/gcs_frame.c | 78 +++
.../arm64/signal/testcases/gcs_write_fault.c | 67 +++
.../selftests/arm64/signal/testcases/testcases.c | 7 +
.../selftests/arm64/signal/testcases/testcases.h | 1 +
72 files changed, 3683 insertions(+), 34 deletions(-)
---
base-commit: 730a197c555893dfad0deebcace710d5c7425ba5
change-id: 20230303-arm64-gcs-e311ab0d8729
Best regards,
--
Mark Brown <broonie(a)kernel.org>