October 2024 - Linux-kselftest-mirror

[PATCH v13 00/40] arm64/gcs: Provide support for GCS in userspace

by Mark Brown

The arm64 Guarded Control Stack (GCS) feature provides support for hardware protected stacks of return addresses, intended to provide hardening against return oriented programming (ROP) attacks and to make it easier to gather call stacks for applications such as profiling. When GCS is active a secondary stack called the Guarded Control Stack is maintained, protected with a memory attribute which means that it can only be written with specific GCS operations. The current GCS pointer can not be directly written to by userspace. When a BL is executed the value stored in LR is also pushed onto the GCS, and when a RET is executed the top of the GCS is popped and compared to LR with a fault being raised if the values do not match. GCS operations may only be performed on GCS pages, a data abort is generated if they are not. The combination of hardware enforcement and lack of extra instructions in the function entry and exit paths should result in something which has less overhead and is more difficult to attack than a purely software implementation like clang's shadow stacks. This series implements support for use of GCS by userspace, along with support for use of GCS within KVM guests. It does not enable use of GCS by either EL1 or EL2, this will be implemented separately. Executables are started without GCS and must use a prctl() to enable it, it is expected that this will be done very early in application execution by the dynamic linker or other startup code. For dynamic linking this will be done by checking that everything in the executable is marked as GCS compatible. x86 has an equivalent feature called shadow stacks, this series depends on the x86 patches for generic memory management support for the new guarded/shadow stack page type and shares APIs as much as possible. As there has been extensive discussion with the wider community around the ABI for shadow stacks I have as far as practical kept implementation decisions close to those for x86, anticipating that review would lead to similar conclusions in the absence of strong reasoning for divergence. The main divergence I am concious of is that x86 allows shadow stack to be enabled and disabled repeatedly, freeing the shadow stack for the thread whenever disabled, while this implementation keeps the GCS allocated after disable but refuses to reenable it. This is to avoid races with things actively walking the GCS during a disable, we do anticipate that some systems will wish to disable GCS at runtime but are not aware of any demand for subsequently reenabling it. x86 uses an arch_prctl() to manage enable and disable, since only x86 and S/390 use arch_prctl() a generic prctl() was proposed[1] as part of a patch set for the equivalent RISC-V Zicfiss feature which I initially adopted fairly directly but following review feedback has been revised quite a bit. We currently maintain the x86 pattern of implicitly allocating a shadow stack for threads started with shadow stack enabled, there has been some discussion of removing this support and requiring the use of clone3() with explicit allocation of shadow stacks instead. I have no strong feelings either way, implicit allocation is not really consistent with anything else we do and creates the potential for errors around thread exit but on the other hand it is existing ABI on x86 and minimises the changes needed in userspace code. glibc and bionic changes using this ABI have been implemented and tested. Headless Android systems have been validated and Ross Burton has used this code has been used to bring up a Yocto system with GCS enabed as standard, a test implementation of V8 support has also been done. uprobes are not currently supported, missing emulation was identified late in review. There is an open issue with support for CRIU, on x86 this required the ability to set the GCS mode via ptrace. This series supports configuring mode bits other than enable/disable via ptrace but it needs to be confirmed if this is sufficient. It is likely that we could relax some of the barriers added here with some more targeted placements, this is left for further study. There is an in process series adding clone3() support for shadow stacks: https://lore.kernel.org/r/20240819-clone3-shadow-stack-v9-0-962d74f99464@ke… Previous versions of this series depended on that, this dependency has been removed in order to make merging easier. [1] https://lore.kernel.org/lkml/20240403234054.2020347-1-debug@rivosinc.com/ Signed-off-by: Mark Brown <broonie(a)kernel.org> --- Changes in v13: - Rebase onto v6.12-rc1. - Allocate VM_HIGH_ARCH_6 since protection keys used all the existing bits. - Implement mm_release() and free transparently allocated GCSs there. - Use bit 32 of AT_HWCAP for GCS due to AT_HWCAP2 being filled. - Since we now only set GCSCRE0_EL1 on change ensure that it is initialised with GCSPR_EL0 accessible to EL0. - Fix OOM handling on thread copy. - Link to v12: https://lore.kernel.org/r/20240829-arm64-gcs-v12-0-42fec947436a@kernel.org Changes in v12: - Clarify and simplify the signal handling code so we work with the register state. - When checking for write aborts to shadow stack pages ensure the fault is a data abort. - Depend on !UPROBES. - Comment cleanups. - Link to v11: https://lore.kernel.org/r/20240822-arm64-gcs-v11-0-41b81947ecb5@kernel.org Changes in v11: - Remove the dependency on the addition of clone3() support for shadow stacks, rebasing onto v6.11-rc3. - Make ID_AA64PFR1_EL1.GCS writeable in KVM. - Hide GCS registers when GCS is not enabled for KVM guests. - Require HCRX_EL2.GCSEn if booting at EL1. - Require that GCSCR_EL1 and GCSCRE0_EL1 be initialised regardless of if we boot at EL2 or EL1. - Remove some stray use of bit 63 in signal cap tokens. - Warn if we see a GCS with VM_SHARED. - Remove rdundant check for VM_WRITE in fault handling. - Cleanups and clarifications in the ABI document. - Clean up and improve documentation of some sync placement. - Only set the EL0 GCS mode if it's actually changed. - Various minor fixes and tweaks. - Link to v10: https://lore.kernel.org/r/20240801-arm64-gcs-v10-0-699e2bd2190b@kernel.org Changes in v10: - Fix issues with THP. - Tighten up requirements for initialising GCSCR*. - Only generate GCS signal frames for threads using GCS. - Only context switch EL1 GCS registers if S1PIE is enabled. - Move context switch of GCSCRE0_EL1 to EL0 context switch. - Make GCS registers unconditionally visible to userspace. - Use FHU infrastructure. - Don't change writability of ID_AA64PFR1_EL1 for KVM. - Remove unused arguments from alloc_gcs(). - Typo fixes. - Link to v9: https://lore.kernel.org/r/20240625-arm64-gcs-v9-0-0f634469b8f0@kernel.org Changes in v9: - Rebase onto v6.10-rc3. - Restructure and clarify memory management fault handling. - Fix up basic-gcs for the latest clone3() changes. - Convert to newly merged KVM ID register based feature configuration. - Fixes for NV traps. - Link to v8: https://lore.kernel.org/r/20240203-arm64-gcs-v8-0-c9fec77673ef@kernel.org Changes in v8: - Invalidate signal cap token on stack when consuming. - Typo and other trivial fixes. - Don't try to use process_vm_write() on GCS, it intentionally does not work. - Fix leak of thread GCSs. - Rebase onto latest clone3() series. - Link to v7: https://lore.kernel.org/r/20231122-arm64-gcs-v7-0-201c483bd775@kernel.org Changes in v7: - Rebase onto v6.7-rc2 via the clone3() patch series. - Change the token used to cap the stack during signal handling to be compatible with GCSPOPM. - Fix flags for new page types. - Fold in support for clone3(). - Replace copy_to_user_gcs() with put_user_gcs(). - Link to v6: https://lore.kernel.org/r/20231009-arm64-gcs-v6-0-78e55deaa4dd@kernel.org Changes in v6: - Rebase onto v6.6-rc3. - Add some more gcsb_dsync() barriers following spec clarifications. - Due to ongoing discussion around clone()/clone3() I've not updated anything there, the behaviour is the same as on previous versions. - Link to v5: https://lore.kernel.org/r/20230822-arm64-gcs-v5-0-9ef181dd6324@kernel.org Changes in v5: - Don't map any permissions for user GCSs, we always use EL0 accessors or use a separate mapping of the page. - Reduce the standard size of the GCS to RLIMIT_STACK/2. - Enforce a PAGE_SIZE alignment requirement on map_shadow_stack(). - Clarifications and fixes to documentation. - More tests. - Link to v4: https://lore.kernel.org/r/20230807-arm64-gcs-v4-0-68cfa37f9069@kernel.org Changes in v4: - Implement flags for map_shadow_stack() allowing the cap and end of stack marker to be enabled independently or not at all. - Relax size and alignment requirements for map_shadow_stack(). - Add more blurb explaining the advantages of hardware enforcement. - Link to v3: https://lore.kernel.org/r/20230731-arm64-gcs-v3-0-cddf9f980d98@kernel.org Changes in v3: - Rebase onto v6.5-rc4. - Add a GCS barrier on context switch. - Add a GCS stress test. - Link to v2: https://lore.kernel.org/r/20230724-arm64-gcs-v2-0-dc2c1d44c2eb@kernel.org Changes in v2: - Rebase onto v6.5-rc3. - Rework prctl() interface to allow each bit to be locked independently. - map_shadow_stack() now places the cap token based on the size requested by the caller not the actual space allocated. - Mode changes other than enable via ptrace are now supported. - Expand test coverage. - Various smaller fixes and adjustments. - Link to v1: https://lore.kernel.org/r/20230716-arm64-gcs-v1-0-bf567f93bba6@kernel.org --- Mark Brown (40): mm: Introduce ARCH_HAS_USER_SHADOW_STACK mm: Define VM_HIGH_ARCH_6 arm64/mm: Restructure arch_validate_flags() for extensibility prctl: arch-agnostic prctl for shadow stack mman: Add map_shadow_stack() flags arm64: Document boot requirements for Guarded Control Stacks arm64/gcs: Document the ABI for Guarded Control Stacks arm64/sysreg: Add definitions for architected GCS caps arm64/gcs: Add manual encodings of GCS instructions arm64/gcs: Provide put_user_gcs() arm64/gcs: Provide basic EL2 setup to allow GCS usage at EL0 and EL1 arm64/cpufeature: Runtime detection of Guarded Control Stack (GCS) arm64/mm: Allocate PIE slots for EL0 guarded control stack mm: Define VM_SHADOW_STACK for arm64 when we support GCS arm64/mm: Map pages for guarded control stack KVM: arm64: Manage GCS access and registers for guests arm64/idreg: Add overrride for GCS arm64/hwcap: Add hwcap for GCS arm64/traps: Handle GCS exceptions arm64/mm: Handle GCS data aborts arm64/gcs: Context switch GCS state for EL0 arm64/gcs: Ensure that new threads have a GCS arm64/gcs: Implement shadow stack prctl() interface arm64/mm: Implement map_shadow_stack() arm64/signal: Set up and restore the GCS context for signal handlers arm64/signal: Expose GCS state in signal frames arm64/ptrace: Expose GCS via ptrace and core files arm64: Add Kconfig for Guarded Control Stack (GCS) kselftest/arm64: Verify the GCS hwcap kselftest/arm64: Add GCS as a detected feature in the signal tests kselftest/arm64: Add framework support for GCS to signal handling tests kselftest/arm64: Allow signals tests to specify an expected si_code kselftest/arm64: Always run signals tests with GCS enabled kselftest/arm64: Add very basic GCS test program kselftest/arm64: Add a GCS test program built with the system libc kselftest/arm64: Add test coverage for GCS mode locking kselftest/arm64: Add GCS signal tests kselftest/arm64: Add a GCS stress test kselftest/arm64: Enable GCS for the FP stress tests KVM: selftests: arm64: Add GCS registers to get-reg-list Documentation/admin-guide/kernel-parameters.txt | 3 + Documentation/arch/arm64/booting.rst | 32 + Documentation/arch/arm64/elf_hwcaps.rst | 4 + Documentation/arch/arm64/gcs.rst | 230 +++++++ Documentation/arch/arm64/index.rst | 1 + Documentation/filesystems/proc.rst | 2 +- arch/arm64/Kconfig | 21 + arch/arm64/include/asm/cpufeature.h | 6 + arch/arm64/include/asm/el2_setup.h | 30 + arch/arm64/include/asm/esr.h | 28 +- arch/arm64/include/asm/exception.h | 2 + arch/arm64/include/asm/gcs.h | 107 +++ arch/arm64/include/asm/hwcap.h | 1 + arch/arm64/include/asm/kvm_host.h | 12 + arch/arm64/include/asm/mman.h | 23 +- arch/arm64/include/asm/mmu_context.h | 9 + arch/arm64/include/asm/pgtable-prot.h | 14 +- arch/arm64/include/asm/processor.h | 7 + arch/arm64/include/asm/sysreg.h | 20 + arch/arm64/include/asm/uaccess.h | 40 ++ arch/arm64/include/asm/vncr_mapping.h | 2 + arch/arm64/include/uapi/asm/hwcap.h | 3 +- arch/arm64/include/uapi/asm/ptrace.h | 8 + arch/arm64/include/uapi/asm/sigcontext.h | 9 + arch/arm64/kernel/cpufeature.c | 23 + arch/arm64/kernel/cpuinfo.c | 1 + arch/arm64/kernel/entry-common.c | 23 + arch/arm64/kernel/pi/idreg-override.c | 2 + arch/arm64/kernel/process.c | 94 +++ arch/arm64/kernel/ptrace.c | 62 +- arch/arm64/kernel/signal.c | 227 ++++++- arch/arm64/kernel/traps.c | 11 + arch/arm64/kvm/hyp/include/hyp/sysreg-sr.h | 31 + arch/arm64/kvm/sys_regs.c | 27 +- arch/arm64/mm/Makefile | 1 + arch/arm64/mm/fault.c | 40 ++ arch/arm64/mm/gcs.c | 254 +++++++ arch/arm64/mm/mmap.c | 9 +- arch/arm64/tools/cpucaps | 1 + arch/x86/Kconfig | 1 + arch/x86/include/uapi/asm/mman.h | 3 - fs/proc/task_mmu.c | 2 +- include/linux/mm.h | 18 +- include/uapi/asm-generic/mman.h | 4 + include/uapi/linux/elf.h | 1 + include/uapi/linux/prctl.h | 22 + kernel/sys.c | 30 + mm/Kconfig | 6 + tools/testing/selftests/arm64/Makefile | 2 +- tools/testing/selftests/arm64/abi/hwcap.c | 19 + tools/testing/selftests/arm64/fp/assembler.h | 15 + tools/testing/selftests/arm64/fp/fpsimd-test.S | 2 + tools/testing/selftests/arm64/fp/sve-test.S | 2 + tools/testing/selftests/arm64/fp/za-test.S | 2 + tools/testing/selftests/arm64/fp/zt-test.S | 2 + tools/testing/selftests/arm64/gcs/.gitignore | 5 + tools/testing/selftests/arm64/gcs/Makefile | 24 + tools/testing/selftests/arm64/gcs/asm-offsets.h | 0 tools/testing/selftests/arm64/gcs/basic-gcs.c | 357 ++++++++++ tools/testing/selftests/arm64/gcs/gcs-locking.c | 200 ++++++ .../selftests/arm64/gcs/gcs-stress-thread.S | 311 +++++++++ tools/testing/selftests/arm64/gcs/gcs-stress.c | 530 +++++++++++++++ tools/testing/selftests/arm64/gcs/gcs-util.h | 100 +++ tools/testing/selftests/arm64/gcs/libc-gcs.c | 728 +++++++++++++++++++++ tools/testing/selftests/arm64/signal/.gitignore | 1 + .../testing/selftests/arm64/signal/test_signals.c | 17 +- .../testing/selftests/arm64/signal/test_signals.h | 6 + .../selftests/arm64/signal/test_signals_utils.c | 32 +- .../selftests/arm64/signal/test_signals_utils.h | 39 ++ .../arm64/signal/testcases/gcs_exception_fault.c | 62 ++ .../selftests/arm64/signal/testcases/gcs_frame.c | 88 +++ .../arm64/signal/testcases/gcs_write_fault.c | 67 ++ .../selftests/arm64/signal/testcases/testcases.c | 7 + .../selftests/arm64/signal/testcases/testcases.h | 1 + tools/testing/selftests/kvm/aarch64/get-reg-list.c | 28 + 75 files changed, 4120 insertions(+), 34 deletions(-) --- base-commit: 9852d85ec9d492ebef56dc5f229416c925758edc change-id: 20230303-arm64-gcs-e311ab0d8729 Best regards, -- Mark Brown <broonie(a)kernel.org>

1 year, 2 months

6
56
0 0

[PATCH net-next 00/10] selftests: net: Introduce deferred commands

by Petr Machata

Recently, a defer helper was added to Python selftests. The idea is to keep cleanup commands close to their dirtying counterparts, thereby making it more transparent what is cleaning up what, making it harder to miss a cleanup, and make the whole cleanup business exception safe. All these benefits are applicable to bash as well, exception safety can be interpreted in terms of safety vs. a SIGINT. This patchset therefore introduces a framework of several helpers that serve to schedule cleanups in bash selftests. - Patch #1 has more details about the primitives being introduced. Patch #2 adds a fallback cleanup() function to lib.sh, because ideally selftests wouldn't need to introduce a dedicated cleanup function at all. - Patch #3 adds a parameter to stop_traffic(), which makes it possible to start other background processes after the traffic is started without confusing the cleanup. - Patches #4 to #10 convert a number of selftests. The goal was to convert all tests that use start_traffic / stop_traffic to the defer framework. Leftover traffic generators are a particularly painful sort of a missed cleanup. Normal unfinished cleanups can usually be cleaned up simply by rerunning the test and interrupting it early to let the cleanups run again / in full. This does not work with stop_traffic, because it is only issued at the end of the test case that starts the traffic. At the same time, leftover traffic generators influence follow-up test runs, and are hard to notice. The tests were however converted whole-sale, not just their traffic bits. Thus they form a proof of concept of the defer framework. v1 (from the RFC): - Patch #1: - Added the priority defer track - Dropped defer_scoped_fn, added in_defer_scope - Extracted to a separate independent module - Patch #2: - Moved this bit to a separate patch - Patch #3: - New patch - Patch #4 (RED): - Squashed the individual RED-related patches into one - Converted the SW datapath RED selftest as well - Patch #5 (TBF): - Fully converted the selftest, not just stop_traffic - Patches #6, #7, #8, #9, #10: - New patch Petr Machata (10): selftests: net: lib: Introduce deferred commands selftests: forwarding: Add a fallback cleanup() selftests: forwarding: lib: Allow passing PID to stop_traffic() selftests: RED: Use defer for test cleanup selftests: TBF: Use defer for test cleanup selftests: ETS: Use defer for test cleanup selftests: mlxsw: qos_mc_aware: Use defer for test cleanup selftests: mlxsw: qos_ets_strict: Use defer for test cleanup selftests: mlxsw: qos_max_descriptors: Use defer for test cleanup selftests: mlxsw: devlink_trap_police: Use defer for test cleanup .../drivers/net/mlxsw/devlink_trap_policer.sh | 85 ++++----- .../drivers/net/mlxsw/qos_ets_strict.sh | 167 ++++++++--------- .../drivers/net/mlxsw/qos_max_descriptors.sh | 118 +++++------- .../drivers/net/mlxsw/qos_mc_aware.sh | 146 +++++++-------- .../selftests/drivers/net/mlxsw/sch_ets.sh | 26 ++- .../drivers/net/mlxsw/sch_red_core.sh | 171 +++++++++--------- .../drivers/net/mlxsw/sch_red_ets.sh | 24 +-- .../drivers/net/mlxsw/sch_red_root.sh | 18 +- tools/testing/selftests/net/forwarding/lib.sh | 13 +- .../selftests/net/forwarding/sch_ets.sh | 7 +- .../selftests/net/forwarding/sch_ets_core.sh | 81 +++------ .../selftests/net/forwarding/sch_ets_tests.sh | 14 +- .../selftests/net/forwarding/sch_red.sh | 103 ++++------- .../selftests/net/forwarding/sch_tbf_core.sh | 91 +++------- .../net/forwarding/sch_tbf_etsprio.sh | 7 +- .../selftests/net/forwarding/sch_tbf_root.sh | 3 +- tools/testing/selftests/net/lib.sh | 3 + tools/testing/selftests/net/lib/Makefile | 2 +- tools/testing/selftests/net/lib/sh/defer.sh | 115 ++++++++++++ 19 files changed, 587 insertions(+), 607 deletions(-) create mode 100644 tools/testing/selftests/net/lib/sh/defer.sh -- 2.45.0

1 year, 2 months

2
14
0 0

[RFC PATCH 0/4] implement lightweight guard pages

by Lorenzo Stoakes

Userland library functions such as allocators and threading implementations often require regions of memory to act as 'guard pages' - mappings which, when accessed, result in a fatal signal being sent to the accessing process. The current means by which these are implemented is via a PROT_NONE mmap() mapping, which provides the required semantics however incur an overhead of a VMA for each such region. With a great many processes and threads, this can rapidly add up and incur a significant memory penalty. It also has the added problem of preventing merges that might otherwise be permitted. This series takes a different approach - an idea suggested by Vlasimil Babka (and before him David Hildenbrand and Jann Horn - perhaps more - the provenance becomes a little tricky to ascertain after this - please forgive any omissions!) - rather than locating the guard pages at the VMA layer, instead placing them in page tables mapping the required ranges. Early testing of the prototype version of this code suggests a 5 times speed up in memory mapping invocations (in conjunction with use of process_madvise()) and a 13% reduction in VMAs on an entirely idle android system and unoptimised code. We expect with optimisation and a loaded system with a larger number of guard pages this could significantly increase, but in any case these numbers are encouraging. This way, rather than having separate VMAs specifying which parts of a range are guard pages, instead we have a VMA spanning the entire range of memory a user is permitted to access and including ranges which are to be 'guarded'. After mapping this, a user can specify which parts of the range should result in a fatal signal when accessed. By restricting the ability to specify guard pages to memory mapped by existing VMAs, we can rely on the mappings being torn down when the mappings are ultimately unmapped and everything works simply as if the memory were not faulted in, from the point of view of the containing VMAs. This mechanism in effect poisons memory ranges similar to hardware memory poisoning, only it is an entirely software-controlled form of poisoning. Any poisoned region of memory is also able to 'unpoisoned', that is, to have its poison markers removed. The mechanism is implemented via madvise() behaviour - MADV_GUARD_POISON which simply poisons ranges - and MADV_GUARD_UNPOISON - which clears this poisoning. Poisoning can be performed across multiple VMAs and any existing mappings will be cleared, that is zapped, before installing the poisoned page table mappings. There is no concept of 'nested' poisoning, multiple attempts to poison a range will, after the first poisoning, have no effect. Importantly, unpoisoning of poisoned ranges has no effect on non-poisoned memory, so a user can safely unpoison a range of memory and clear only poison page table mappings leaving the rest intact. The actual mechanism by which the page table entries are specified makes use of existing logic - PTE markers, which are used for the userfaultfd UFFDIO_POISON mechanism. Unfortunately PTE_MARKER_POISONED is not suited for the guard page mechanism as it results in VM_FAULT_HWPOISON semantics in the fault handler, so we add our own specific PTE_MARKER_GUARD and adapt existing logic to handle it. We also extend the generic page walk mechanism to allow for installation of PTEs (carefully restricted to memory management logic only to prevent unwanted abuse). We ensure that zapping performed by, for instance, MADV_DONTNEED, does not remove guard poison markers, nor does forking (except when VM_WIPEONFORK is specified for a VMA which implies a total removal of memory characteristics). It's important to note that the guard page implementation is emphatically NOT a security feature, so a user can remove the poisoning if they wish. We simply implement it in such a way as to provide the least surprising behaviour. An extensive set of self-tests are provided which ensure behaviour is as expected and additionally self-documents expected behaviour of poisoned ranges. Suggested-by: Vlastimil Babka <vbabka(a)suze.cz> Suggested-by: Jann Horn <jannh(a)google.com> Suggested-by: David Hildenbrand <david(a)redhat.com> Lorenzo Stoakes (4): mm: pagewalk: add the ability to install PTEs mm: add PTE_MARKER_GUARD PTE marker mm: madvise: implement lightweight guard page mechanism selftests/mm: add self tests for guard page feature arch/alpha/include/uapi/asm/mman.h | 3 + arch/mips/include/uapi/asm/mman.h | 3 + arch/parisc/include/uapi/asm/mman.h | 3 + arch/xtensa/include/uapi/asm/mman.h | 3 + include/linux/mm_inline.h | 2 +- include/linux/pagewalk.h | 18 +- include/linux/swapops.h | 26 +- include/uapi/asm-generic/mman-common.h | 3 + mm/hugetlb.c | 3 + mm/internal.h | 6 + mm/madvise.c | 158 +++ mm/memory.c | 18 +- mm/mprotect.c | 3 +- mm/mseal.c | 1 + mm/pagewalk.c | 174 ++-- tools/testing/selftests/mm/.gitignore | 1 + tools/testing/selftests/mm/Makefile | 1 + tools/testing/selftests/mm/guard-pages.c | 1168 ++++++++++++++++++++++ 18 files changed, 1525 insertions(+), 69 deletions(-) create mode 100644 tools/testing/selftests/mm/guard-pages.c -- 2.46.2

1 year, 2 months

6
24
0 0

[PATCH -next] selftests/cgroup: Fix compile error in test_cpu.c

by Xiu Jianfeng

From: Xiu Jianfeng <xiujianfeng(a)huawei.com> When compiling the cgroup selftests with the following command: make -C tools/testing/selftests/cgroup/ the compiler complains as below: test_cpu.c: In function ‘test_cpucg_nice’: test_cpu.c:284:39: error: incompatible type for argument 2 of ‘hog_cpus_timed’ 284 | hog_cpus_timed(cpucg, param); | ^~~~~ | | | struct cpu_hog_func_param test_cpu.c:132:53: note: expected ‘void *’ but argument is of type ‘struct cpu_hog_func_param’ 132 | static int hog_cpus_timed(const char *cgroup, void *arg) | ~~~~~~^~~ Fix it by passing the address of param to hog_cpus_timed(). Fixes: 2e82c0d4562a ("cgroup/rstat: Selftests for niced CPU statistics") Signed-off-by: Xiu Jianfeng <xiujianfeng(a)huawei.com> --- tools/testing/selftests/cgroup/test_cpu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/cgroup/test_cpu.c b/tools/testing/selftests/cgroup/test_cpu.c index 201ce14cb422..a2b50af8e9ee 100644 --- a/tools/testing/selftests/cgroup/test_cpu.c +++ b/tools/testing/selftests/cgroup/test_cpu.c @@ -281,7 +281,7 @@ static int test_cpucg_nice(const char *root) /* Try to keep niced CPU usage as constrained to hog_cpu as possible */ nice(1); - hog_cpus_timed(cpucg, param); + hog_cpus_timed(cpucg, &param); exit(0); } else { waitpid(pid, &status, 0); -- 2.34.1

1 year, 2 months

2
1
0 0

[PATCH v2 net-next] selftests: tc-testing: Fixed Typo error

by Karan Sanghavi

This commit combines two fixes for typographical errors in the "name" fields of the JSON objects with IDs "4319" and "4341" in the tc-testing selftests. For the files tc-tests/filters/cgroup.json and /tc-tests/filters/flow.json. v2: - Combine two earlier patches into one - Links to v1 of each patch [1] https://lore.kernel.org/all/Zqp9asVA-q_OzDP-@Emma/ [2] https://lore.kernel.org/all/Zqp92oXa9joXk4T9@Emma/ Signed-off-by: Karan Sanghavi <karansanghvi98(a)gmail.com> --- tools/testing/selftests/tc-testing/tc-tests/filters/cgroup.json | 2 +- tools/testing/selftests/tc-testing/tc-tests/filters/flow.json | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/tc-testing/tc-tests/filters/cgroup.json b/tools/testing/selftests/tc-testing/tc-tests/filters/cgroup.json index 03723cf84..6897ff5ad 100644 --- a/tools/testing/selftests/tc-testing/tc-tests/filters/cgroup.json +++ b/tools/testing/selftests/tc-testing/tc-tests/filters/cgroup.json @@ -1189,7 +1189,7 @@ }, { "id": "4319", - "name": "Replace cgroup filter with diffferent match", + "name": "Replace cgroup filter with different match", "category": [ "filter", "cgroup" diff --git a/tools/testing/selftests/tc-testing/tc-tests/filters/flow.json b/tools/testing/selftests/tc-testing/tc-tests/filters/flow.json index 58189327f..996448afe 100644 --- a/tools/testing/selftests/tc-testing/tc-tests/filters/flow.json +++ b/tools/testing/selftests/tc-testing/tc-tests/filters/flow.json @@ -507,7 +507,7 @@ }, { "id": "4341", - "name": "Add flow filter with muliple ops", + "name": "Add flow filter with multiple ops", "category": [ "filter", "flow" -- 2.43.0

1 year, 2 months

2
1
0 0

[PATCH] selftests/intel_pstate: fix operand expected

by Alessandro Zanni

This fix solves these errors, when calling kselftest with targets "intel_pstate": - ./run.sh: line 90: / 1000: syntax error: operand expected (error token is "/ 1000") - ./run.sh: line 92: / 1000: syntax error: operand expected (error token is "/ 1000") To error was found by running tests manually with the command: make kselftest TARGETS=intel_pstate Signed-off-by: Alessandro Zanni <alessandro.zanni87(a)gmail.com> --- tools/testing/selftests/intel_pstate/run.sh | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/intel_pstate/run.sh b/tools/testing/selftests/intel_pstate/run.sh index e7008f614ad7..39130a359535 100755 --- a/tools/testing/selftests/intel_pstate/run.sh +++ b/tools/testing/selftests/intel_pstate/run.sh @@ -87,9 +87,11 @@ mkt_freq=${_mkt_freq}0 # Get the ranges from cpupower _min_freq=$(cpupower frequency-info -l | tail -1 | awk ' { print $1 } ') -min_freq=$(($_min_freq / 1000)) +min_freq=$((_min_freq / 1000)) +echo "min_freq:" +echo $min_freq _max_freq=$(cpupower frequency-info -l | tail -1 | awk ' { print $2 } ') -max_freq=$(($_max_freq / 1000)) +max_freq=$((_max_freq / 1000)) [ $EVALUATE_ONLY -eq 0 ] && for freq in `seq $max_freq -100 $min_freq` -- 2.43.0

1 year, 2 months

2
1
0 0

[PATCH] selftests:timers: remove local CLOCKID defines

by Shuah Khan

timers tests defines CLOCKIDs locally. Remove all local CLOCKIDs except CLOCK_HWSPECIFIC and use defines from time.h header file. CLOCK_HWSPECIFIC and CLOCK_SGI_CYCLE are the same and CLOCK_SGI_CYCLE is deprecated, Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> --- tools/testing/selftests/timers/adjtick.c | 2 -- .../selftests/timers/alarmtimer-suspend.c | 15 --------------- .../selftests/timers/inconsistency-check.c | 19 ++++--------------- tools/testing/selftests/timers/nanosleep.c | 18 ++++-------------- tools/testing/selftests/timers/nsleep-lat.c | 19 ++++--------------- tools/testing/selftests/timers/raw_skew.c | 2 -- .../testing/selftests/timers/set-timer-lat.c | 16 +++------------- 7 files changed, 15 insertions(+), 76 deletions(-) diff --git a/tools/testing/selftests/timers/adjtick.c b/tools/testing/selftests/timers/adjtick.c index cb9a30f54662..777d9494b683 100644 --- a/tools/testing/selftests/timers/adjtick.c +++ b/tools/testing/selftests/timers/adjtick.c @@ -26,8 +26,6 @@ #include "../kselftest.h" -#define CLOCK_MONOTONIC_RAW 4 - #define MILLION 1000000 long systick; diff --git a/tools/testing/selftests/timers/alarmtimer-suspend.c b/tools/testing/selftests/timers/alarmtimer-suspend.c index 62da2a3f949e..2da382df5eaa 100644 --- a/tools/testing/selftests/timers/alarmtimer-suspend.c +++ b/tools/testing/selftests/timers/alarmtimer-suspend.c @@ -31,21 +31,6 @@ #include <include/vdso/time64.h> #include "../kselftest.h" -#define CLOCK_REALTIME 0 -#define CLOCK_MONOTONIC 1 -#define CLOCK_PROCESS_CPUTIME_ID 2 -#define CLOCK_THREAD_CPUTIME_ID 3 -#define CLOCK_MONOTONIC_RAW 4 -#define CLOCK_REALTIME_COARSE 5 -#define CLOCK_MONOTONIC_COARSE 6 -#define CLOCK_BOOTTIME 7 -#define CLOCK_REALTIME_ALARM 8 -#define CLOCK_BOOTTIME_ALARM 9 -#define CLOCK_HWSPECIFIC 10 -#define CLOCK_TAI 11 -#define NR_CLOCKIDS 12 - - #define UNREASONABLE_LAT (NSEC_PER_SEC * 5) /* hopefully we resume in 5 secs */ #define SUSPEND_SECS 15 diff --git a/tools/testing/selftests/timers/inconsistency-check.c b/tools/testing/selftests/timers/inconsistency-check.c index 75650cf0503f..9d1573769d55 100644 --- a/tools/testing/selftests/timers/inconsistency-check.c +++ b/tools/testing/selftests/timers/inconsistency-check.c @@ -31,21 +31,10 @@ #include <include/vdso/time64.h> #include "../kselftest.h" -#define CALLS_PER_LOOP 64 - -#define CLOCK_REALTIME 0 -#define CLOCK_MONOTONIC 1 -#define CLOCK_PROCESS_CPUTIME_ID 2 -#define CLOCK_THREAD_CPUTIME_ID 3 -#define CLOCK_MONOTONIC_RAW 4 -#define CLOCK_REALTIME_COARSE 5 -#define CLOCK_MONOTONIC_COARSE 6 -#define CLOCK_BOOTTIME 7 -#define CLOCK_REALTIME_ALARM 8 -#define CLOCK_BOOTTIME_ALARM 9 +/* CLOCK_HWSPECIFIC == CLOCK_SGI_CYCLE (Deprecated) */ #define CLOCK_HWSPECIFIC 10 -#define CLOCK_TAI 11 -#define NR_CLOCKIDS 12 + +#define CALLS_PER_LOOP 64 char *clockstring(int clockid) { @@ -152,7 +141,7 @@ int main(int argc, char *argv[]) { int clockid, opt; int userclock = CLOCK_REALTIME; - int maxclocks = NR_CLOCKIDS; + int maxclocks = CLOCK_TAI + 1; int runtime = 10; struct timespec ts; diff --git a/tools/testing/selftests/timers/nanosleep.c b/tools/testing/selftests/timers/nanosleep.c index 9a354e38a569..252c6308c569 100644 --- a/tools/testing/selftests/timers/nanosleep.c +++ b/tools/testing/selftests/timers/nanosleep.c @@ -30,19 +30,8 @@ #include <include/vdso/time64.h> #include "../kselftest.h" -#define CLOCK_REALTIME 0 -#define CLOCK_MONOTONIC 1 -#define CLOCK_PROCESS_CPUTIME_ID 2 -#define CLOCK_THREAD_CPUTIME_ID 3 -#define CLOCK_MONOTONIC_RAW 4 -#define CLOCK_REALTIME_COARSE 5 -#define CLOCK_MONOTONIC_COARSE 6 -#define CLOCK_BOOTTIME 7 -#define CLOCK_REALTIME_ALARM 8 -#define CLOCK_BOOTTIME_ALARM 9 +/* CLOCK_HWSPECIFIC == CLOCK_SGI_CYCLE (Deprecated) */ #define CLOCK_HWSPECIFIC 10 -#define CLOCK_TAI 11 -#define NR_CLOCKIDS 12 #define UNSUPPORTED 0xf00f @@ -131,11 +120,12 @@ int main(int argc, char **argv) { long long length; int clockid, ret; + int max_clocks = CLOCK_TAI + 1; ksft_print_header(); - ksft_set_plan(NR_CLOCKIDS); + ksft_set_plan(max_clocks); - for (clockid = CLOCK_REALTIME; clockid < NR_CLOCKIDS; clockid++) { + for (clockid = CLOCK_REALTIME; clockid < max_clocks; clockid++) { /* Skip cputime clockids since nanosleep won't increment cputime */ if (clockid == CLOCK_PROCESS_CPUTIME_ID || diff --git a/tools/testing/selftests/timers/nsleep-lat.c b/tools/testing/selftests/timers/nsleep-lat.c index f6a99490b291..de23dc0c9f97 100644 --- a/tools/testing/selftests/timers/nsleep-lat.c +++ b/tools/testing/selftests/timers/nsleep-lat.c @@ -29,20 +29,8 @@ #define UNRESONABLE_LATENCY 40000000 /* 40ms in nanosecs */ - -#define CLOCK_REALTIME 0 -#define CLOCK_MONOTONIC 1 -#define CLOCK_PROCESS_CPUTIME_ID 2 -#define CLOCK_THREAD_CPUTIME_ID 3 -#define CLOCK_MONOTONIC_RAW 4 -#define CLOCK_REALTIME_COARSE 5 -#define CLOCK_MONOTONIC_COARSE 6 -#define CLOCK_BOOTTIME 7 -#define CLOCK_REALTIME_ALARM 8 -#define CLOCK_BOOTTIME_ALARM 9 +/* CLOCK_HWSPECIFIC == CLOCK_SGI_CYCLE (Deprecated) */ #define CLOCK_HWSPECIFIC 10 -#define CLOCK_TAI 11 -#define NR_CLOCKIDS 12 #define UNSUPPORTED 0xf00f @@ -144,11 +132,12 @@ int main(int argc, char **argv) { long long length; int clockid, ret; + int max_clocks = CLOCK_TAI + 1; ksft_print_header(); - ksft_set_plan(NR_CLOCKIDS - CLOCK_REALTIME - SKIPPED_CLOCK_COUNT); + ksft_set_plan(max_clocks - CLOCK_REALTIME - SKIPPED_CLOCK_COUNT); - for (clockid = CLOCK_REALTIME; clockid < NR_CLOCKIDS; clockid++) { + for (clockid = CLOCK_REALTIME; clockid < max_clocks; clockid++) { /* Skip cputime clockids since nanosleep won't increment cputime */ if (clockid == CLOCK_PROCESS_CPUTIME_ID || diff --git a/tools/testing/selftests/timers/raw_skew.c b/tools/testing/selftests/timers/raw_skew.c index ea50e4efc422..957f7cd29cb1 100644 --- a/tools/testing/selftests/timers/raw_skew.c +++ b/tools/testing/selftests/timers/raw_skew.c @@ -28,8 +28,6 @@ #include <include/vdso/time64.h> #include "../kselftest.h" -#define CLOCK_MONOTONIC_RAW 4 - #define shift_right(x, s) ({ \ __typeof__(x) __x = (x); \ __typeof__(s) __s = (s); \ diff --git a/tools/testing/selftests/timers/set-timer-lat.c b/tools/testing/selftests/timers/set-timer-lat.c index 5365e9ae61c3..4574f8f04542 100644 --- a/tools/testing/selftests/timers/set-timer-lat.c +++ b/tools/testing/selftests/timers/set-timer-lat.c @@ -31,19 +31,8 @@ #include <include/vdso/time64.h> #include "../kselftest.h" -#define CLOCK_REALTIME 0 -#define CLOCK_MONOTONIC 1 -#define CLOCK_PROCESS_CPUTIME_ID 2 -#define CLOCK_THREAD_CPUTIME_ID 3 -#define CLOCK_MONOTONIC_RAW 4 -#define CLOCK_REALTIME_COARSE 5 -#define CLOCK_MONOTONIC_COARSE 6 -#define CLOCK_BOOTTIME 7 -#define CLOCK_REALTIME_ALARM 8 -#define CLOCK_BOOTTIME_ALARM 9 +/* CLOCK_HWSPECIFIC == CLOCK_SGI_CYCLE (Deprecated) */ #define CLOCK_HWSPECIFIC 10 -#define CLOCK_TAI 11 -#define NR_CLOCKIDS 12 #define UNRESONABLE_LATENCY 40000000 /* 40ms in nanosecs */ @@ -253,6 +242,7 @@ int main(void) struct sigaction act; int signum = SIGRTMAX; int ret = 0; + int max_clocks = CLOCK_TAI + 1; /* Set up signal handler: */ sigfillset(&act.sa_mask); @@ -261,7 +251,7 @@ int main(void) sigaction(signum, &act, NULL); printf("Setting timers for every %i seconds\n", TIMER_SECS); - for (clock_id = 0; clock_id < NR_CLOCKIDS; clock_id++) { + for (clock_id = 0; clock_id < max_clocks; clock_id++) { if ((clock_id == CLOCK_PROCESS_CPUTIME_ID) || (clock_id == CLOCK_THREAD_CPUTIME_ID) || -- 2.40.1

1 year, 2 months

3
3
0 0

[PATCH] selftests: timers: Remove unneeded semicolon

by Chen Ni

Remove unnecessary semicolons reported by Coccinelle/coccicheck and the semantic patch at scripts/coccinelle/misc/semicolon.cocci. Signed-off-by: Chen Ni <nichen(a)iscas.ac.cn> --- tools/testing/selftests/timers/set-timer-lat.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/timers/set-timer-lat.c b/tools/testing/selftests/timers/set-timer-lat.c index 5365e9ae61c3..7a1a2382538c 100644 --- a/tools/testing/selftests/timers/set-timer-lat.c +++ b/tools/testing/selftests/timers/set-timer-lat.c @@ -79,7 +79,7 @@ char *clockstring(int clockid) return "CLOCK_BOOTTIME_ALARM"; case CLOCK_TAI: return "CLOCK_TAI"; - }; + } return "UNKNOWN_CLOCKID"; } -- 2.25.1

1 year, 2 months

3
3
0 0

[RFC PATCH] selftest/tcp-ao: Add filter tests

by Leo Stone

Add tests that check if getsockopt(TCP_AO_GET_KEYS) returns the right keys when using different filters. Sample output: > # ok 114 filter keys: by sndid, rcvid, address > # ok 115 filter keys: by sndid, rcvid > # ok 116 filter keys: by is_current > # ok 117 filter keys: by is_rnext Signed-off-by: Leo Stone <leocstone(a)gmail.com> --- This patch is meant to address the TODO in setsockopt-closed.c: > /* > * TODO: check getsockopt(TCP_AO_GET_KEYS) with different filters > * returning proper nr & keys; > */ Is this a reasonable way to do these tests? If so, what cases should I add? --- .../selftests/net/tcp_ao/setsockopt-closed.c | 158 +++++++++++++++++- 1 file changed, 157 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/tcp_ao/setsockopt-closed.c b/tools/testing/selftests/net/tcp_ao/setsockopt-closed.c index 084db4ecdff6..4c8aa06eef5a 100644 --- a/tools/testing/selftests/net/tcp_ao/setsockopt-closed.c +++ b/tools/testing/selftests/net/tcp_ao/setsockopt-closed.c @@ -6,6 +6,8 @@ static union tcp_addr tcp_md5_client; +#define FILTER_TEST_NKEYS 16 + static int test_port = 7788; static void make_listen(int sk) { @@ -813,12 +815,166 @@ static void duplicate_tests(void) setsockopt_checked(sk, TCP_AO_ADD_KEY, &ao, EEXIST, "duplicate: SendID differs"); } + +static void fetch_all_keys(int sk, struct tcp_ao_getsockopt *keys) +{ + socklen_t optlen = sizeof(struct tcp_ao_getsockopt); + + memset(keys, 0, sizeof(struct tcp_ao_getsockopt) * FILTER_TEST_NKEYS); + keys[0].get_all = 1; + keys[0].nkeys = FILTER_TEST_NKEYS; + if (getsockopt(sk, IPPROTO_TCP, TCP_AO_GET_KEYS, &keys[0], &optlen)) + test_error("getsockopt"); +} + +static int prepare_test_keys(struct tcp_ao_getsockopt *keys) +{ + struct tcp_ao_add test_ao[FILTER_TEST_NKEYS]; + u8 rcvid = 100, sndid = 100; + const char *test_password = "Test password number "; + char test_password_scratch[64] = {}; + int sk = socket(test_family, SOCK_STREAM, IPPROTO_TCP); + + if (sk < 0) + test_error("socket()"); + + for (int i = 0; i < FILTER_TEST_NKEYS; i++) { + snprintf(test_password_scratch, 64, "%s %d", test_password, i); + test_prepare_key(&test_ao[i], DEFAULT_TEST_ALGO, this_ip_dest, false, false, + DEFAULT_TEST_PREFIX, 0, sndid++, rcvid++, 0, 0, + strlen(test_password_scratch), test_password_scratch); + } + test_ao[0].set_current = 1; + test_ao[1].set_rnext = 1; + /* One key with a different addr and overlapping sndid, rcvid */ + tcp_addr_to_sockaddr_in(&test_ao[2].addr, &this_ip_addr, 0); + test_ao[2].sndid = 100; + test_ao[2].rcvid = 100; + + /* Add keys in a random order */ + for (int i = 0; i < FILTER_TEST_NKEYS; i++) { + int randidx = rand() % (FILTER_TEST_NKEYS - i); + + if (setsockopt(sk, IPPROTO_TCP, TCP_AO_ADD_KEY, &test_ao[randidx], + sizeof(struct tcp_ao_add))) + test_error("setsockopt()"); + memcpy(&test_ao[randidx], &test_ao[FILTER_TEST_NKEYS - 1 - i], + sizeof(struct tcp_ao_add)); + } + + fetch_all_keys(sk, keys); + + return sk; +} + +/* Assumes passwords are unique */ +static int compare_mkts(struct tcp_ao_getsockopt *expected, int nexpected, + struct tcp_ao_getsockopt *actual, int nactual) +{ + int matches = 0; + + for (int i = 0; i < nexpected; i++) { + for (int j = 0; j < nactual; j++) { + if (memcmp(expected[i].key, actual[j].key, TCP_AO_MAXKEYLEN) == 0) + matches++; + } + } + return nexpected - matches; +} + +static void filter_keys_checked(int sk, struct tcp_ao_getsockopt *filter, + struct tcp_ao_getsockopt *expected, + unsigned int nexpected, const char *tst) +{ + struct tcp_ao_getsockopt all_keys[FILTER_TEST_NKEYS] = {}; + struct tcp_ao_getsockopt filtered_keys[FILTER_TEST_NKEYS] = {}; + socklen_t len = sizeof(struct tcp_ao_getsockopt); + + fetch_all_keys(sk, all_keys); + memcpy(&filtered_keys[0], filter, sizeof(struct tcp_ao_getsockopt)); + filtered_keys[0].nkeys = FILTER_TEST_NKEYS; + if (getsockopt(sk, IPPROTO_TCP, TCP_AO_GET_KEYS, filtered_keys, &len)) + test_error("getsockopt"); + if (filtered_keys[0].nkeys != nexpected) + test_error("wrong nr of keys, expected %u got %u", nexpected, + filtered_keys[0].nkeys); + if (compare_mkts(expected, nexpected, filtered_keys, filtered_keys[0].nkeys)) + test_error("got wrong keys back"); + test_ok("filter keys: %s", tst); + + close(sk); + memset(filter, 0, sizeof(struct tcp_ao_getsockopt)); +} + +static void filter_tests(void) +{ + struct tcp_ao_getsockopt original_keys[FILTER_TEST_NKEYS]; + struct tcp_ao_getsockopt expected_keys[FILTER_TEST_NKEYS]; + struct tcp_ao_getsockopt filter = {}; + int sk, f, nmatches; + + f = 2; + sk = prepare_test_keys(original_keys); + filter.rcvid = original_keys[f].rcvid; + filter.sndid = original_keys[f].sndid; + memcpy(&filter.addr, &original_keys[f].addr, sizeof(original_keys[f].addr)); + filter.prefix = original_keys[f].prefix; + filter_keys_checked(sk, &filter, &original_keys[f], 1, "by sndid, rcvid, address"); + + f = -1; + sk = prepare_test_keys(original_keys); + for (int i = 0; i < original_keys[0].nkeys; i++) { + if (original_keys[i].is_current) { + f = i; + break; + } + } + if (f < 0) + test_error("No current key after adding one"); + filter.is_current = 1; + filter_keys_checked(sk, &filter, &original_keys[f], 1, "by is_current"); + + f = -1; + sk = prepare_test_keys(original_keys); + for (int i = 0; i < original_keys[0].nkeys; i++) { + if (original_keys[i].is_rnext) { + f = i; + break; + } + } + if (f < 0) + test_error("No rnext key after adding one"); + filter.is_rnext = 1; + filter_keys_checked(sk, &filter, &original_keys[f], 1, "by is_rnext"); + + f = -1; + nmatches = 0; + sk = prepare_test_keys(original_keys); + for (int i = 0; i < original_keys[0].nkeys; i++) { + if (original_keys[i].sndid == 100) { + f = i; + memcpy(&expected_keys[nmatches], &original_keys[i], + sizeof(struct tcp_ao_getsockopt)); + nmatches++; + } + } + if (f < 0) + test_error("No key for sndid 100"); + if (nmatches != 2) + test_error("Should have 2 keys with sndid 100"); + filter.rcvid = original_keys[f].rcvid; + filter.sndid = original_keys[f].sndid; + filter.addr.ss_family = test_family; + filter_keys_checked(sk, &filter, expected_keys, nmatches, "by sndid, rcvid"); +} + static void *client_fn(void *arg) { if (inet_pton(TEST_FAMILY, __TEST_CLIENT_IP(2), &tcp_md5_client) != 1) test_error("Can't convert ip address"); extend_tests(); einval_tests(); + filter_tests(); duplicate_tests(); /* * TODO: check getsockopt(TCP_AO_GET_KEYS) with different filters @@ -830,6 +986,6 @@ static void *client_fn(void *arg) int main(int argc, char *argv[]) { - test_init(121, client_fn, NULL); + test_init(125, client_fn, NULL); return 0; } -- 2.43.0

1 year, 2 months

2
1
0 0

[PATCH 6.6 206/213] selftests/rseq: Fix mm_cid test failure

by Greg Kroah-Hartman

6.6-stable review patch. If anyone has any objections, please let me know. ------------------ From: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> commit a0cc649353bb726d4aa0db60dce467432197b746 upstream. Adapt the rseq.c/rseq.h code to follow GNU C library changes introduced by: glibc commit 2e456ccf0c34 ("Linux: Make __rseq_size useful for feature detection (bug 31965)") Without this fix, rseq selftests for mm_cid fail: ./run_param_test.sh Default parameters Running test spinlock Running compare-twice test spinlock Running mm_cid test spinlock Error: cpu id getter unavailable Fixes: 18c2355838e7 ("selftests/rseq: Implement rseq mm_cid field support") Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> Cc: Peter Zijlstra <peterz(a)infradead.org> CC: Boqun Feng <boqun.feng(a)gmail.com> CC: "Paul E. McKenney" <paulmck(a)kernel.org> Cc: Shuah Khan <skhan(a)linuxfoundation.org> CC: Carlos O'Donell <carlos(a)redhat.com> CC: Florian Weimer <fweimer(a)redhat.com> CC: linux-kselftest(a)vger.kernel.org CC: stable(a)vger.kernel.org Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- tools/testing/selftests/rseq/rseq.c | 110 ++++++++++++++++++++++++------------ tools/testing/selftests/rseq/rseq.h | 10 --- 2 files changed, 77 insertions(+), 43 deletions(-) --- a/tools/testing/selftests/rseq/rseq.c +++ b/tools/testing/selftests/rseq/rseq.c @@ -60,12 +60,6 @@ unsigned int rseq_size = -1U; /* Flags used during rseq registration. */ unsigned int rseq_flags; -/* - * rseq feature size supported by the kernel. 0 if the registration was - * unsuccessful. - */ -unsigned int rseq_feature_size = -1U; - static int rseq_ownership; static int rseq_reg_success; /* At least one rseq registration has succeded. */ @@ -111,6 +105,43 @@ int rseq_available(void) } } +/* The rseq areas need to be at least 32 bytes. */ +static +unsigned int get_rseq_min_alloc_size(void) +{ + unsigned int alloc_size = rseq_size; + + if (alloc_size < ORIG_RSEQ_ALLOC_SIZE) + alloc_size = ORIG_RSEQ_ALLOC_SIZE; + return alloc_size; +} + +/* + * Return the feature size supported by the kernel. + * + * Depending on the value returned by getauxval(AT_RSEQ_FEATURE_SIZE): + * + * 0: Return ORIG_RSEQ_FEATURE_SIZE (20) + * > 0: Return the value from getauxval(AT_RSEQ_FEATURE_SIZE). + * + * It should never return a value below ORIG_RSEQ_FEATURE_SIZE. + */ +static +unsigned int get_rseq_kernel_feature_size(void) +{ + unsigned long auxv_rseq_feature_size, auxv_rseq_align; + + auxv_rseq_align = getauxval(AT_RSEQ_ALIGN); + assert(!auxv_rseq_align || auxv_rseq_align <= RSEQ_THREAD_AREA_ALLOC_SIZE); + + auxv_rseq_feature_size = getauxval(AT_RSEQ_FEATURE_SIZE); + assert(!auxv_rseq_feature_size || auxv_rseq_feature_size <= RSEQ_THREAD_AREA_ALLOC_SIZE); + if (auxv_rseq_feature_size) + return auxv_rseq_feature_size; + else + return ORIG_RSEQ_FEATURE_SIZE; +} + int rseq_register_current_thread(void) { int rc; @@ -119,7 +150,7 @@ int rseq_register_current_thread(void) /* Treat libc's ownership as a successful registration. */ return 0; } - rc = sys_rseq(&__rseq_abi, rseq_size, 0, RSEQ_SIG); + rc = sys_rseq(&__rseq_abi, get_rseq_min_alloc_size(), 0, RSEQ_SIG); if (rc) { if (RSEQ_READ_ONCE(rseq_reg_success)) { /* Incoherent success/failure within process. */ @@ -140,28 +171,12 @@ int rseq_unregister_current_thread(void) /* Treat libc's ownership as a successful unregistration. */ return 0; } - rc = sys_rseq(&__rseq_abi, rseq_size, RSEQ_ABI_FLAG_UNREGISTER, RSEQ_SIG); + rc = sys_rseq(&__rseq_abi, get_rseq_min_alloc_size(), RSEQ_ABI_FLAG_UNREGISTER, RSEQ_SIG); if (rc) return -1; return 0; } -static -unsigned int get_rseq_feature_size(void) -{ - unsigned long auxv_rseq_feature_size, auxv_rseq_align; - - auxv_rseq_align = getauxval(AT_RSEQ_ALIGN); - assert(!auxv_rseq_align || auxv_rseq_align <= RSEQ_THREAD_AREA_ALLOC_SIZE); - - auxv_rseq_feature_size = getauxval(AT_RSEQ_FEATURE_SIZE); - assert(!auxv_rseq_feature_size || auxv_rseq_feature_size <= RSEQ_THREAD_AREA_ALLOC_SIZE); - if (auxv_rseq_feature_size) - return auxv_rseq_feature_size; - else - return ORIG_RSEQ_FEATURE_SIZE; -} - static __attribute__((constructor)) void rseq_init(void) { @@ -178,28 +193,54 @@ void rseq_init(void) } if (libc_rseq_size_p && libc_rseq_offset_p && libc_rseq_flags_p && *libc_rseq_size_p != 0) { + unsigned int libc_rseq_size; + /* rseq registration owned by glibc */ rseq_offset = *libc_rseq_offset_p; - rseq_size = *libc_rseq_size_p; + libc_rseq_size = *libc_rseq_size_p; rseq_flags = *libc_rseq_flags_p; - rseq_feature_size = get_rseq_feature_size(); - if (rseq_feature_size > rseq_size) - rseq_feature_size = rseq_size; + + /* + * Previous versions of glibc expose the value + * 32 even though the kernel only supported 20 + * bytes initially. Therefore treat 32 as a + * special-case. glibc 2.40 exposes a 20 bytes + * __rseq_size without using getauxval(3) to + * query the supported size, while still allocating a 32 + * bytes area. Also treat 20 as a special-case. + * + * Special-cases are handled by using the following + * value as active feature set size: + * + * rseq_size = min(32, get_rseq_kernel_feature_size()) + */ + switch (libc_rseq_size) { + case ORIG_RSEQ_FEATURE_SIZE: + fallthrough; + case ORIG_RSEQ_ALLOC_SIZE: + { + unsigned int rseq_kernel_feature_size = get_rseq_kernel_feature_size(); + + if (rseq_kernel_feature_size < ORIG_RSEQ_ALLOC_SIZE) + rseq_size = rseq_kernel_feature_size; + else + rseq_size = ORIG_RSEQ_ALLOC_SIZE; + break; + } + default: + /* Otherwise just use the __rseq_size from libc as rseq_size. */ + rseq_size = libc_rseq_size; + break; + } return; } rseq_ownership = 1; if (!rseq_available()) { rseq_size = 0; - rseq_feature_size = 0; return; } rseq_offset = (void *)&__rseq_abi - rseq_thread_pointer(); rseq_flags = 0; - rseq_feature_size = get_rseq_feature_size(); - if (rseq_feature_size == ORIG_RSEQ_FEATURE_SIZE) - rseq_size = ORIG_RSEQ_ALLOC_SIZE; - else - rseq_size = RSEQ_THREAD_AREA_ALLOC_SIZE; } static __attribute__((destructor)) @@ -209,7 +250,6 @@ void rseq_exit(void) return; rseq_offset = 0; rseq_size = -1U; - rseq_feature_size = -1U; rseq_ownership = 0; } --- a/tools/testing/selftests/rseq/rseq.h +++ b/tools/testing/selftests/rseq/rseq.h @@ -68,12 +68,6 @@ extern unsigned int rseq_size; /* Flags used during rseq registration. */ extern unsigned int rseq_flags; -/* - * rseq feature size supported by the kernel. 0 if the registration was - * unsuccessful. - */ -extern unsigned int rseq_feature_size; - enum rseq_mo { RSEQ_MO_RELAXED = 0, RSEQ_MO_CONSUME = 1, /* Unused */ @@ -193,7 +187,7 @@ static inline uint32_t rseq_current_cpu( static inline bool rseq_node_id_available(void) { - return (int) rseq_feature_size >= rseq_offsetofend(struct rseq_abi, node_id); + return (int) rseq_size >= rseq_offsetofend(struct rseq_abi, node_id); } /* @@ -207,7 +201,7 @@ static inline uint32_t rseq_current_node static inline bool rseq_mm_cid_available(void) { - return (int) rseq_feature_size >= rseq_offsetofend(struct rseq_abi, mm_cid); + return (int) rseq_size >= rseq_offsetofend(struct rseq_abi, mm_cid); } static inline uint32_t rseq_current_mm_cid(void)

1 year, 2 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror October 2024