November 2024 - Linux-kselftest-mirror

[PATCH bpf 0/4] bpf, vsock: Fix poll() and close()

by Michal Luczaj

Two small fixes for vsock: poll() missing a queue check, and close() not invoking sockmap cleanup. Signed-off-by: Michal Luczaj <mhal(a)rbox.co> --- Michal Luczaj (4): bpf, vsock: Fix poll() missing a queue selftest/bpf: Add test for af_vsock poll() bpf, vsock: Invoke proto::close on close() selftest/bpf: Add test for vsock removal from sockmap on close() net/vmw_vsock/af_vsock.c | 70 ++++++++++++-------- .../selftests/bpf/prog_tests/sockmap_basic.c | 77 ++++++++++++++++++++++ 2 files changed, 120 insertions(+), 27 deletions(-) --- base-commit: 6c4139b0f19b7397286897caee379f8321e78272 change-id: 20241118-vsock-bpf-poll-close-64f432e682ec Best regards, -- Michal Luczaj <mhal(a)rbox.co>

3 weeks, 5 days

5
17
0 0

[PATCH for-next v3] selftests/mm: Add a few missing gitignore files

by Li Zhijian

Compiled binary files should be added to .gitignore 'git status' complains: Untracked files: (use "git add <file>..." to include in what will be committed) mm/hugetlb_dio mm/pkey_sighandler_tests_32 mm/pkey_sighandler_tests_64 Cc: Donet Tom <donettom(a)linux.ibm.com> Cc: Andrew Morton <akpm(a)linux-foundation.org> Cc: Shuah Khan <shuah(a)kernel.org> Signed-off-by: Li Zhijian <lizhijian(a)fujitsu.com> --- Cc: linux-mm(a)kvack.org --- Hello, Cover letter is here. This patch set aims to make 'git status' clear after 'make' and 'make run_tests' for kselftests. --- V3: nothing change, just resend it (This .gitignore have not sorted, so I appended new files to the end) V2: split as seperate patch from a small one [0] [0] https://lore.kernel.org/linux-kselftest/20241015010817.453539-1-lizhijian@f… --- tools/testing/selftests/mm/.gitignore | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tools/testing/selftests/mm/.gitignore b/tools/testing/selftests/mm/.gitignore index da030b43e43b..2ac11b7fcb26 100644 --- a/tools/testing/selftests/mm/.gitignore +++ b/tools/testing/selftests/mm/.gitignore @@ -51,3 +51,5 @@ hugetlb_madv_vs_map mseal_test seal_elf droppable +hugetlb_dio +pkey_sighandler_tests* -- 2.44.0

3 weeks, 5 days

3
4
0 0

Comunicado. Valide seu telemovel para continuar a utilizar. Montepio em 25/11 16:8

by Net24 Empresas

3 weeks, 5 days

1
0
0 0

[PATCH kselftest] fix single bpf test

by Jiayuan Chen

Currently, when testing a certain target in selftests, executing the command 'make TARGETS=XX -C tools/testing/selftests' succeeds for non-BPF, but a similar command fails for BPF: ''' make TARGETS=bpf -C tools/testing/selftests make: Entering directory '/linux-kselftest/tools/testing/selftests' make: *** [Makefile:197: all] Error 1 make: Leaving directory '/linux-kselftest/tools/testing/selftests' ''' The reason is that the previous commit: commit 7a6eb7c34a78 ("selftests: Skip BPF seftests by default") led to the default filtering of bpf in TARGETS which make TARGETS empty. That commit also mentioned that building BPF tests requires external commands to run. This caused target like 'bpf' or 'sched_ext' defined in SKIP_TARGETS to need an additional specification of SKIP_TARGETS as empty to avoid skipping it, for example: ''' make TARGETS=bpf SKIP_TARGETS="" -C tools/testing/selftests ''' If special steps are required to execute certain test, it is extremely unfair. We need a fairer way to treat different test targets. This commit provider a way: If a user has specified a single TARGETS, it indicates an expectation to run the specified target, and thus the object should not be skipped. Another way is to change TARGETS to DEFAULT_TARGETS in the Makefile and then check if the user specified TARGETS and decide whether filter or not, though this approach requires too many modifications. Signed-off-by: Jiayuan Chen <mrpre(a)163.com> --- tools/testing/selftests/Makefile | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index 363d031a16f7..d76c1781ec09 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -116,7 +116,7 @@ TARGETS += vDSO TARGETS += mm TARGETS += x86 TARGETS += zram -#Please keep the TARGETS list alphabetically sorted +# Please keep the TARGETS list alphabetically sorted # Run "make quicktest=1 run_tests" or # "make quicktest=1 kselftest" from top level Makefile @@ -132,12 +132,15 @@ endif # User can optionally provide a TARGETS skiplist. By default we skip # targets using BPF since it has cutting edge build time dependencies -# which require more effort to install. +# If user provide custom TARGETS, we just ignore SKIP_TARGETS so that +# user can easy to test single target which defined in SKIP_TARGETS SKIP_TARGETS ?= bpf sched_ext ifneq ($(SKIP_TARGETS),) +ifneq ($(words $(TARGETS)), 1) TMP := $(filter-out $(SKIP_TARGETS), $(TARGETS)) override TARGETS := $(TMP) endif +endif # User can set FORCE_TARGETS to 1 to require all targets to be successfully # built; make will fail if any of the targets cannot be built. If base-commit: 67b6d342fb6d5abfbeb71e0f23141b9b96cf7bb1 -- 2.43.5

3 weeks, 5 days

3
2
0 0

[PATCH] selftests: Warn about skipped tests in result summary

by Laura Nao

Update the functions that print the test totals at the end of a selftest to include a warning message when skipped tests are detected. The message advises users that skipped tests may indicate missing configuration options and suggests enabling them to improve coverage. Signed-off-by: Laura Nao <laura.nao(a)collabora.com> --- This patch follows up on a previous discussion[1] and aims to highlight skipped tests for the user's attention. [1] https://lore.kernel.org/lkml/2bb2d338-cd00-4ac2-b8bd-5579eae82637@linuxfoun… --- tools/testing/selftests/kselftest.h | 4 ++++ tools/testing/selftests/kselftest/ksft.py | 3 +++ tools/testing/selftests/kselftest/ktap_helpers.sh | 4 ++++ 3 files changed, 11 insertions(+) diff --git a/tools/testing/selftests/kselftest.h b/tools/testing/selftests/kselftest.h index 29fedf609611..d3f64b333acd 100644 --- a/tools/testing/selftests/kselftest.h +++ b/tools/testing/selftests/kselftest.h @@ -147,6 +147,10 @@ static inline void ksft_set_plan(unsigned int plan) static inline void ksft_print_cnts(void) { + if (ksft_cnt.ksft_xskip > 0) + printf( + "# Skipped tests detected. Consider enabling relevant config options to improve coverage.\n" + ); if (ksft_plan != ksft_test_num()) printf("# Planned tests != run tests (%u != %u)\n", ksft_plan, ksft_test_num()); diff --git a/tools/testing/selftests/kselftest/ksft.py b/tools/testing/selftests/kselftest/ksft.py index bf215790a89d..7675a15a1264 100644 --- a/tools/testing/selftests/kselftest/ksft.py +++ b/tools/testing/selftests/kselftest/ksft.py @@ -27,6 +27,9 @@ def set_plan(num_tests): def print_cnts(): + if ksft_cnt['skip'] > 0: + print("# Skipped tests detected. Consider enabling relevant config options to improve coverage.") + print( f"# Totals: pass:{ksft_cnt['pass']} fail:{ksft_cnt['fail']} xfail:0 xpass:0 skip:{ksft_cnt['skip']} error:0" ) diff --git a/tools/testing/selftests/kselftest/ktap_helpers.sh b/tools/testing/selftests/kselftest/ktap_helpers.sh index 79a125eb24c2..a4211221ccd6 100644 --- a/tools/testing/selftests/kselftest/ktap_helpers.sh +++ b/tools/testing/selftests/kselftest/ktap_helpers.sh @@ -107,5 +107,9 @@ ktap_finished() { } ktap_print_totals() { + if [ "$KTAP_CNT_SKIP" -gt 0 ]; then + echo "# Skipped tests detected. " \ + "Consider enabling relevant config options to improve coverage." + fi echo "# Totals: pass:$KTAP_CNT_PASS fail:$KTAP_CNT_FAIL xfail:0 xpass:0 skip:$KTAP_CNT_SKIP error:0" } -- 2.30.2

3 weeks, 6 days

3
3
0 0

[PATCH] kunit: constify return of string literals

by Christian Göttsche

From: Christian Göttsche <cgzones(a)googlemail.com> The function kunit_status_to_ok_not_ok() returns string literals, thus declare the return value as such. Reported by clang: ./include/kunit/test.h:143:10: warning: returning 'const char[3]' from a function with result type 'char *' discards qualifiers [-Wincompatible-pointer-types-discards-qualifiers] 143 | return "ok"; | ^~~~ ./include/kunit/test.h:145:10: warning: returning 'const char[7]' from a function with result type 'char *' discards qualifiers [-Wincompatible-pointer-types-discards-qualifiers] 145 | return "not ok"; | ^~~~~~~~ ./include/kunit/test.h:147:9: warning: returning 'const char[8]' from a function with result type 'char *' discards qualifiers [-Wincompatible-pointer-types-discards-qualifiers] 147 | return "invalid"; | ^~~~~~~~~ Signed-off-by: Christian Göttsche <cgzones(a)googlemail.com> --- include/kunit/test.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/kunit/test.h b/include/kunit/test.h index 34b71e42fb10..ae1b57578476 100644 --- a/include/kunit/test.h +++ b/include/kunit/test.h @@ -135,7 +135,7 @@ struct kunit_case { struct string_stream *log; }; -static inline char *kunit_status_to_ok_not_ok(enum kunit_status status) +static inline const char *kunit_status_to_ok_not_ok(enum kunit_status status) { switch (status) { case KUNIT_SKIPPED: -- 2.45.2

3 weeks, 6 days

1
0
0 0

[PATCH AUTOSEL 6.6 14/16] selftests/resctrl: Protect against array overflow when reading strings

by Sasha Levin

From: Reinette Chatre <reinette.chatre(a)intel.com> [ Upstream commit 46058430fc5d39c114f7e1b9c6ff14c9f41bd531 ] resctrl selftests discover system properties via a variety of sysfs files. The MBM and MBA tests need to discover the event and umask with which to configure the performance event used to measure read memory bandwidth. This is done by parsing the contents of /sys/bus/event_source/devices/uncore_imc_<imc instance>/events/cas_count_read Similarly, the resctrl selftests discover the cache size via /sys/bus/cpu/devices/cpu<id>/cache/index<index>/size. Take care to do bounds checking when using fscanf() to read the contents of files into a string buffer because by default fscanf() assumes arbitrarily long strings. If the file contains more bytes than the array can accommodate then an overflow will occur. Provide a maximum field width to the conversion specifier to protect against array overflow. The maximum is one less than the array size because string input stores a terminating null byte that is not covered by the maximum field width. Signed-off-by: Reinette Chatre <reinette.chatre(a)intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen(a)linux.intel.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/resctrl/resctrl_val.c | 4 ++-- tools/testing/selftests/resctrl/resctrlfs.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/resctrl/resctrl_val.c b/tools/testing/selftests/resctrl/resctrl_val.c index 45439e726e79c..438dd86f2704c 100644 --- a/tools/testing/selftests/resctrl/resctrl_val.c +++ b/tools/testing/selftests/resctrl/resctrl_val.c @@ -179,7 +179,7 @@ static int read_from_imc_dir(char *imc_dir, int count) return -1; } - if (fscanf(fp, "%s", cas_count_cfg) <= 0) { + if (fscanf(fp, "%1023s", cas_count_cfg) <= 0) { ksft_perror("Could not get iMC cas count read"); fclose(fp); @@ -197,7 +197,7 @@ static int read_from_imc_dir(char *imc_dir, int count) return -1; } - if (fscanf(fp, "%s", cas_count_cfg) <= 0) { + if (fscanf(fp, "%1023s", cas_count_cfg) <= 0) { ksft_perror("Could not get iMC cas count write"); fclose(fp); diff --git a/tools/testing/selftests/resctrl/resctrlfs.c b/tools/testing/selftests/resctrl/resctrlfs.c index 71ad2b335b83f..fe3241799841b 100644 --- a/tools/testing/selftests/resctrl/resctrlfs.c +++ b/tools/testing/selftests/resctrl/resctrlfs.c @@ -160,7 +160,7 @@ int get_cache_size(int cpu_no, char *cache_type, unsigned long *cache_size) return -1; } - if (fscanf(fp, "%s", cache_str) <= 0) { + if (fscanf(fp, "%63s", cache_str) <= 0) { ksft_perror("Could not get cache_size"); fclose(fp); -- 2.43.0

4 weeks

1
0
0 0

[PATCH AUTOSEL 6.11 18/20] selftests/resctrl: Protect against array overflow when reading strings

by Sasha Levin

From: Reinette Chatre <reinette.chatre(a)intel.com> [ Upstream commit 46058430fc5d39c114f7e1b9c6ff14c9f41bd531 ] resctrl selftests discover system properties via a variety of sysfs files. The MBM and MBA tests need to discover the event and umask with which to configure the performance event used to measure read memory bandwidth. This is done by parsing the contents of /sys/bus/event_source/devices/uncore_imc_<imc instance>/events/cas_count_read Similarly, the resctrl selftests discover the cache size via /sys/bus/cpu/devices/cpu<id>/cache/index<index>/size. Take care to do bounds checking when using fscanf() to read the contents of files into a string buffer because by default fscanf() assumes arbitrarily long strings. If the file contains more bytes than the array can accommodate then an overflow will occur. Provide a maximum field width to the conversion specifier to protect against array overflow. The maximum is one less than the array size because string input stores a terminating null byte that is not covered by the maximum field width. Signed-off-by: Reinette Chatre <reinette.chatre(a)intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen(a)linux.intel.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/resctrl/resctrl_val.c | 4 ++-- tools/testing/selftests/resctrl/resctrlfs.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/resctrl/resctrl_val.c b/tools/testing/selftests/resctrl/resctrl_val.c index 8c275f6b4dd77..1bba85e4c0675 100644 --- a/tools/testing/selftests/resctrl/resctrl_val.c +++ b/tools/testing/selftests/resctrl/resctrl_val.c @@ -160,7 +160,7 @@ static int read_from_imc_dir(char *imc_dir, int count) return -1; } - if (fscanf(fp, "%s", cas_count_cfg) <= 0) { + if (fscanf(fp, "%1023s", cas_count_cfg) <= 0) { ksft_perror("Could not get iMC cas count read"); fclose(fp); @@ -178,7 +178,7 @@ static int read_from_imc_dir(char *imc_dir, int count) return -1; } - if (fscanf(fp, "%s", cas_count_cfg) <= 0) { + if (fscanf(fp, "%1023s", cas_count_cfg) <= 0) { ksft_perror("Could not get iMC cas count write"); fclose(fp); diff --git a/tools/testing/selftests/resctrl/resctrlfs.c b/tools/testing/selftests/resctrl/resctrlfs.c index 250c320349a78..a53cd1cb6e0c6 100644 --- a/tools/testing/selftests/resctrl/resctrlfs.c +++ b/tools/testing/selftests/resctrl/resctrlfs.c @@ -182,7 +182,7 @@ int get_cache_size(int cpu_no, const char *cache_type, unsigned long *cache_size return -1; } - if (fscanf(fp, "%s", cache_str) <= 0) { + if (fscanf(fp, "%63s", cache_str) <= 0) { ksft_perror("Could not get cache_size"); fclose(fp); -- 2.43.0

4 weeks

1
0
0 0

[PATCH AUTOSEL 6.12 20/23] selftests/resctrl: Protect against array overflow when reading strings

by Sasha Levin

From: Reinette Chatre <reinette.chatre(a)intel.com> [ Upstream commit 46058430fc5d39c114f7e1b9c6ff14c9f41bd531 ] resctrl selftests discover system properties via a variety of sysfs files. The MBM and MBA tests need to discover the event and umask with which to configure the performance event used to measure read memory bandwidth. This is done by parsing the contents of /sys/bus/event_source/devices/uncore_imc_<imc instance>/events/cas_count_read Similarly, the resctrl selftests discover the cache size via /sys/bus/cpu/devices/cpu<id>/cache/index<index>/size. Take care to do bounds checking when using fscanf() to read the contents of files into a string buffer because by default fscanf() assumes arbitrarily long strings. If the file contains more bytes than the array can accommodate then an overflow will occur. Provide a maximum field width to the conversion specifier to protect against array overflow. The maximum is one less than the array size because string input stores a terminating null byte that is not covered by the maximum field width. Signed-off-by: Reinette Chatre <reinette.chatre(a)intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen(a)linux.intel.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/resctrl/resctrl_val.c | 4 ++-- tools/testing/selftests/resctrl/resctrlfs.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/resctrl/resctrl_val.c b/tools/testing/selftests/resctrl/resctrl_val.c index 8c275f6b4dd77..1bba85e4c0675 100644 --- a/tools/testing/selftests/resctrl/resctrl_val.c +++ b/tools/testing/selftests/resctrl/resctrl_val.c @@ -160,7 +160,7 @@ static int read_from_imc_dir(char *imc_dir, int count) return -1; } - if (fscanf(fp, "%s", cas_count_cfg) <= 0) { + if (fscanf(fp, "%1023s", cas_count_cfg) <= 0) { ksft_perror("Could not get iMC cas count read"); fclose(fp); @@ -178,7 +178,7 @@ static int read_from_imc_dir(char *imc_dir, int count) return -1; } - if (fscanf(fp, "%s", cas_count_cfg) <= 0) { + if (fscanf(fp, "%1023s", cas_count_cfg) <= 0) { ksft_perror("Could not get iMC cas count write"); fclose(fp); diff --git a/tools/testing/selftests/resctrl/resctrlfs.c b/tools/testing/selftests/resctrl/resctrlfs.c index 250c320349a78..a53cd1cb6e0c6 100644 --- a/tools/testing/selftests/resctrl/resctrlfs.c +++ b/tools/testing/selftests/resctrl/resctrlfs.c @@ -182,7 +182,7 @@ int get_cache_size(int cpu_no, const char *cache_type, unsigned long *cache_size return -1; } - if (fscanf(fp, "%s", cache_str) <= 0) { + if (fscanf(fp, "%63s", cache_str) <= 0) { ksft_perror("Could not get cache_size"); fclose(fp); -- 2.43.0

4 weeks

1
0
0 0

[PATCH AUTOSEL 5.10 5/5] kselftest/arm64: Don't leak pipe fds in pac.exec_sign_all()

by Sasha Levin

From: Mark Brown <broonie(a)kernel.org> [ Upstream commit 27141b690547da5650a420f26ec369ba142a9ebb ] The PAC exec_sign_all() test spawns some child processes, creating pipes to be stdin and stdout for the child. It cleans up most of the file descriptors that are created as part of this but neglects to clean up the parent end of the child stdin and stdout. Add the missing close() calls. Signed-off-by: Mark Brown <broonie(a)kernel.org> Link: https://lore.kernel.org/r/20241111-arm64-pac-test-collisions-v1-1-171875f37… Signed-off-by: Catalin Marinas <catalin.marinas(a)arm.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/arm64/pauth/pac.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/tools/testing/selftests/arm64/pauth/pac.c b/tools/testing/selftests/arm64/pauth/pac.c index b743daa772f55..5a07b3958fbf2 100644 --- a/tools/testing/selftests/arm64/pauth/pac.c +++ b/tools/testing/selftests/arm64/pauth/pac.c @@ -182,6 +182,9 @@ int exec_sign_all(struct signatures *signed_vals, size_t val) return -1; } + close(new_stdin[1]); + close(new_stdout[0]); + return 0; } -- 2.43.0

4 weeks

1
0
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror November 2024