December 2024 - Linux-kselftest-mirror

[PATCH] selftests: net: Fix typo in psock_tpacket.c

by Zhu Jun

The word 'accross' is wrong, so fix it. Signed-off-by: Zhu Jun <zhujun2(a)cmss.chinamobile.com> --- tools/testing/selftests/net/psock_tpacket.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/psock_tpacket.c b/tools/testing/selftests/net/psock_tpacket.c index 404a2ce75..221270cee 100644 --- a/tools/testing/selftests/net/psock_tpacket.c +++ b/tools/testing/selftests/net/psock_tpacket.c @@ -12,7 +12,7 @@ * * Datapath: * Open a pair of packet sockets and send resp. receive an a priori known - * packet pattern accross the sockets and check if it was received resp. + * packet pattern across the sockets and check if it was received resp. * sent correctly. Fanout in combination with RX_RING is currently not * tested here. * -- 2.17.1

2 weeks, 1 day

3
2
0 0

[PATCH net 0/3] selftests: mlxsw: Add few fixes for sharedbuffer test

by Petr Machata

Danielle Ratson writes: Currently, the sharedbuffer test fails sometimes because it is reading a maximum occupancy that is larger than expected on some different cases. This is happening because the test assumes that the packet it is sending is the only packet being passed to the device. In addition, some duplications on one hand, and redundant test cases on the other hand, were found in the test. Add egress filters on h1 and h2 that will guarantee that the packets in the buffer are sent in the test, and remove the redundant test cases. Danielle Ratson (3): selftests: mlxsw: sharedbuffer: Remove h1 ingress test case selftests: mlxsw: sharedbuffer: Remove duplicate test cases selftests: mlxsw: sharedbuffer: Ensure no extra packets are counted .../drivers/net/mlxsw/sharedbuffer.sh | 55 ++++++++++++++----- 1 file changed, 40 insertions(+), 15 deletions(-) -- 2.47.0

2 weeks, 1 day

2
4
0 0

[PATCH] selftests: kselftest: Add ksft_test_result_xpass

by Stefano Pigozzi

The functions ksft_test_result_pass, ksft_test_result_fail, ksft_test_result_xfail, and ksft_test_result_skip already exist and are available for use in selftests, but no XPASS equivalent is available. This adds a new function to that family that outputs XPASS, so that it's available for future test writers. Signed-off-by: Stefano Pigozzi <me(a)steffo.eu> --- tools/testing/selftests/kselftest.h | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/kselftest.h b/tools/testing/selftests/kselftest.h index 29fedf609611..685d9f9554fc 100644 --- a/tools/testing/selftests/kselftest.h +++ b/tools/testing/selftests/kselftest.h @@ -18,7 +18,8 @@ * ksft_print_msg(fmt, ...); * ksft_perror(msg); * - * and finally report the pass/fail/skip/xfail state of the test with one of: + * and finally report the pass/fail/skip/xfail/xpass state of the test + * with one of: * * ksft_test_result(condition, fmt, ...); * ksft_test_result_report(result, fmt, ...); @@ -26,6 +27,7 @@ * ksft_test_result_fail(fmt, ...); * ksft_test_result_skip(fmt, ...); * ksft_test_result_xfail(fmt, ...); + * ksft_test_result_xpass(fmt, ...); * ksft_test_result_error(fmt, ...); * ksft_test_result_code(exit_code, test_name, fmt, ...); * @@ -227,6 +229,20 @@ static inline __printf(1, 2) void ksft_test_result_xfail(const char *msg, ...) va_end(args); } +static inline __printf(1, 2) void ksft_test_result_xpass(const char *msg, ...) +{ + int saved_errno = errno; + va_list args; + + ksft_cnt.ksft_xpass++; + + va_start(args, msg); + printf("ok %u # XPASS ", ksft_test_num()); + errno = saved_errno; + vprintf(msg, args); + va_end(args); +} + static inline __printf(1, 2) void ksft_test_result_skip(const char *msg, ...) { int saved_errno = errno; @@ -318,6 +334,9 @@ void ksft_test_result_code(int exit_code, const char *test_name, case KSFT_XFAIL: \ ksft_test_result_xfail(fmt, ##__VA_ARGS__); \ break; \ + case KSFT_XPASS: \ + ksft_test_result_xpass(fmt, ##__VA_ARGS__); \ + break; \ case KSFT_SKIP: \ ksft_test_result_skip(fmt, ##__VA_ARGS__); \ break; \ -- 2.47.1

2 weeks, 1 day

1
0
0 0

[PATCH bpf-next 0/2] selftests: bpf: Migrate test_xdp_meta.sh to test_progs

by Bastien Curutchet

Hi all, This patch series continues the work to migrate the script tests into prog_tests. test_xdp_meta.sh uses the BPF programs defined in progs/test_xdp_meta.c to do a simple XDP/TC functional test that checks the metadata allocation performed by the bpf_xdp_adjust_meta() helper. This is already partly covered by two tests under prog_tests/: - xdp_context_test_run.c uses bpf_prog_test_run_opts() to verify the validity of the xdp_md context after a call to bpf_xdp_adjust_meta() - xdp_metadata.c ensures that these meta-data can be exchanged through an AF_XDP socket. However test_xdp_meta.sh also verifies that the meta-data initialized in the struct xdp_md is forwarded to the struct __sk_buff used by BPF programs at 'TC level'. To cover this, I add a test case in xdp_context_test_run.c that uses the same BPF programs from progs/test_xdp_meta.c. --- Bastien Curutchet (2): selftests/bpf: test_xdp_meta: Rename BPF sections selftests/bpf: Migrate test_xdp_meta.sh into xdp_context_test_run.c tools/testing/selftests/bpf/Makefile | 1 - .../bpf/prog_tests/xdp_context_test_run.c | 86 ++++++++++++++++++++++ tools/testing/selftests/bpf/progs/test_xdp_meta.c | 4 +- tools/testing/selftests/bpf/test_xdp_meta.sh | 58 --------------- 4 files changed, 88 insertions(+), 61 deletions(-) --- base-commit: 6849a3de3507a490fb0788c9bafbb2f29a904f05 change-id: 20241203-xdp_meta-868307cd0e03 Best regards, -- Bastien Curutchet (eBPF Foundation) <bastien.curutchet(a)bootlin.com>

2 weeks, 1 day

2
3
0 0

[PATCH v4] riscv: selftests: Fix warnings pointer masking test

by Charlie Jenkins

When compiling the pointer masking tests with -Wall this warning is present: pointer_masking.c: In function ‘test_tagged_addr_abi_sysctl’: pointer_masking.c:203:9: warning: ignoring return value of ‘pwrite’ declared with attribute ‘warn_unused_result’ [-Wunused-result] 203 | pwrite(fd, &value, 1, 0); | ^~~~~~~~~~~~~~~~~~~~~~~~ pointer_masking.c:208:9: warning: ignoring return value of ‘pwrite’ declared with attribute ‘warn_unused_result’ [-Wunused-result] 208 | pwrite(fd, &value, 1, 0); I came across this on riscv64-linux-gnu-gcc (Ubuntu 11.4.0-1ubuntu1~22.04). Fix this by checking that the number of bytes written equal the expected number of bytes written. Fixes: 7470b5afd150 ("riscv: selftests: Add a pointer masking test") Signed-off-by: Charlie Jenkins <charlie(a)rivosinc.com> --- Changes in v4: - Skip sysctl_enabled test if first pwrite failed - Link to v3: https://lore.kernel.org/r/20241205-fix_warnings_pointer_masking_tests-v3-1-… Changes in v3: - Fix sysctl enabled test case (Drew/Alex) - Move pwrite err condition into goto (Drew) - Link to v2: https://lore.kernel.org/r/20241204-fix_warnings_pointer_masking_tests-v2-1-… Changes in v2: - I had ret != 2 for testing, I changed it to be ret != 1. - Link to v1: https://lore.kernel.org/r/20241204-fix_warnings_pointer_masking_tests-v1-1-… --- tools/testing/selftests/riscv/abi/pointer_masking.c | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/riscv/abi/pointer_masking.c b/tools/testing/selftests/riscv/abi/pointer_masking.c index dee41b7ee3e3..759445d5f265 100644 --- a/tools/testing/selftests/riscv/abi/pointer_masking.c +++ b/tools/testing/selftests/riscv/abi/pointer_masking.c @@ -189,6 +189,8 @@ static void test_tagged_addr_abi_sysctl(void) { char value; int fd; + int ret; + char *err_pwrite_msg = "failed to write to /proc/sys/abi/tagged_addr_disabled\n"; ksft_print_msg("Testing tagged address ABI sysctl\n"); @@ -200,18 +202,32 @@ static void test_tagged_addr_abi_sysctl(void) } value = '1'; - pwrite(fd, &value, 1, 0); + ret = pwrite(fd, &value, 1, 0); + if (ret != 1) { + ksft_test_result_skip(err_pwrite_msg); + goto err_pwrite; + } + ksft_test_result(set_tagged_addr_ctrl(min_pmlen, true) == -EINVAL, "sysctl disabled\n"); value = '0'; - pwrite(fd, &value, 1, 0); + ret = pwrite(fd, &value, 1, 0); + if (ret != 1) + goto err_pwrite; + ksft_test_result(set_tagged_addr_ctrl(min_pmlen, true) == 0, "sysctl enabled\n"); set_tagged_addr_ctrl(0, false); close(fd); + + return; + +err_pwrite: + close(fd); + ksft_test_result_fail(err_pwrite_msg); } static void test_tagged_addr_abi_pmlen(int pmlen) --- base-commit: 40384c840ea1944d7c5a392e8975ed088ecf0b37 change-id: 20241204-fix_warnings_pointer_masking_tests-3860e4f35429 -- - Charlie

2 weeks, 1 day

2
3
0 0

[PATCH v6 00/15] integrity: Introduce the Integrity Digest Cache

by Roberto Sassu

From: Roberto Sassu <roberto.sassu(a)huawei.com> Integrity detection and protection has long been a desirable feature, to reach a large user base and mitigate the risk of flaws in the software and attacks. However, while solutions exist, they struggle to reach a large user base, due to requiring higher than desired constraints on performance, flexibility and configurability, that only security conscious people are willing to accept. For example, IMA measurement requires the target platform to collect integrity measurements, and to protect them with the TPM, which introduces a noticeable overhead (up to 10x slower in a microbenchmark) on frequently used system calls, like the open(). IMA Appraisal currently requires individual files to be signed and verified, and Linux distributions to rebuild all packages to include file signatures (this approach has been adopted from Fedora 39+). Like a TPM, also signature verification introduces a significant overhead, especially if it is used to check the integrity of many files. This is where the new Integrity Digest Cache comes into play, it offers additional support for new and existing integrity solutions, to make them faster and easier to deploy. The Integrity Digest Cache can help IMA to reduce the number of TPM operations and to make them happen in a deterministic way. If IMA knows that a file comes from a Linux distribution, it can measure files in a different way: measure the list of digests coming from the distribution (e.g. RPM package headers), and subsequently measure a file if it is not found in that list. The performance improvement comes at the cost of IMA not reporting which files from installed packages were accessed, and in which temporal sequence. This approach might not be suitable for all use cases. The Integrity Digest Cache can also help IMA for appraisal. IMA can simply lookup the calculated digest of an accessed file in the list of digests extracted from package headers, after verifying the header signature. It is sufficient to verify only one signature for all files in the package, as opposed to verifying a signature for each file. The same approach can be followed by other LSMs, such as Integrity Policy Enforcement (IPE), and BPF LSM. The Integrity Digest Cache is not tied to a specific package format. The kernel supports a TLV-based digest list format. More can be added through third-party kernel modules. The TLV parser has been verified for memory safety with the Frama-C static analyzer. The version with the Frama-C assertions is available here: https://github.com/robertosassu/rpm-formal/blob/main/validate_tlv.c Integrating the Integrity Digest Cache in IMA brings significant performance improvements: up to 67% and 79% for measurement respectively in sequential and parallel file reads; up to 65% and 43% for appraisal respectively in sequential and parallel file reads. The performance can be further enhanced by using fsverity digests instead of conventional file digests, which would make IMA verify only the portion of the file to be read. However, at the moment, fsverity digests are not included in RPM packages. In this case, once rpm is extended to include them, Linux distributions still have to rebuild their packages. The Integrity Digest Cache can support both digest types, so that the functionality is immediately available without waiting for Linux distributions to do the transition. This patch set only includes the patches necessary to extract digests from a TLV-based data format, and exposes an API for LSMs to query them. A separate patch set will be provided to integrate it in IMA. This patch set and the follow-up IMA integration can be tested by following the instructions at: https://github.com/linux-integrity/digest-cache-tools This patch set applies on top of: https://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity.git/l… with commit 08ae3e5f5fc8 ("integrity: Use static_assert() to check struct sizes"). Changelog v5: - Remove the RPM parser and selftests (suggested by Linus) - Return digest cache pointer from digest_cache_lookup() - Export new Parser API, and allow registration of third-party digest list parsers (suggested by Mimi) - Reduce sizes in TLV format and remove TLV header (suggested by Jani Nikula) - Introduce new DIGEST_LIST_NUM_ENTRIES TLV field - Pass file descriptor instead of dentry in digest_cache_get() to properly detect potential deadlocks - Introduce digest_cache_opened_fd() to tell lockdep when it is safe to nest a mutex if digest_cache_get() is called with that mutex held - Add new patch to introduce ksys_finit_module() - Make the TLV parser as configurable (Y/N/m) with Kconfig (suggested by Mimi) - Don't store the path structure in the digest cache and pass it between creation and initialization of the digest cache - Remove digest_cache_dir_update_dig_user() and keep the digest cache retrieved during digest_cache_get() - Fail with an error pointer in digest_cache_dir_lookup_digest() if the current and passed directory digest cache don't match, or the digest cache was reset - Handle num_digest = 0 in digest_cache_htable_init() - Accept -EOPNOTSUPP error in digest_cache_new() - Implement inode_free_security_rcu LSM hook instead of inode_free_security - Move reservation of file descriptor security blob inside the #ifdef in init_ima_lsm() - Add test file_reset_again to check the error pointer returned by digest_cache_lookup() - Remove TLV_FAILURE_HDR_LEN TLV error test - Add missing MODULE_DESCRIPTION in kselftest kernel module (suggested by Jeff Johnson) - Replace dentry_open() with kernel_file_open() in populate.c and dir.c - Skip affected tests when CONFIG_DYNAMIC_FTRACE_WITH_ARGS=n v4: - Rename digest_cache LSM to Integrity Digest Cache (suggested by Paul Moore) - Update documentation - Remove forward declaration of struct digest_cache in include/linux/digest_cache.h (suggested by Jarkko) - Add DIGEST_CACHE_FREE digest cache event for notification - Remove digest_cache_found_t typedef and use uintptr_t instead - Add header callback in TLV parser and unexport tlv_parse_hdr() and tlv_parse_data() - Plug the Integrity Digest Cache into the 'ima' LSM - Switch from constructor to zeroing the object cache - Remove notifier and detect digest cache changes by comparing pointers - Rename digest_cache_dir_create() to digest_cache_dir_add_entries() - Introduce digest_cache_dir_create() to create and initialize a directory digest cache - Introduce digest_cache_dir_update_dig_user() to update dig_user with a file digest cache on positive digest lookup - Use up to date directory digest cache, to take into account possible inode eviction for the old ones - Introduce digest_cache_dir_prefetch() to prefetch digest lists - Adjust component name in debug messages (suggested by Jarkko) - Add FILE_PREFETCH and FILE_READ digest cache flags, remove RESET_USER - Reintroduce spin lock for digest cache verification data (needed for the selftests) - Get inode and file descriptor security blob offsets from outside (IMA) - Avoid user-after-free in digest_cache_unref() by decrementing the ref. count after printing the debug message - Check for digest list lookup loops also for the parent directory - Put and clear dig_owner directly in digest_cache_reset_clear_owner() - Move digest cache initialization code from digest_cache_create() to digest_cache_init() - Hold the digest list path until the digest cache is initialized (to avoid premature inode eviction) - Avoid race condition on setting DIR_PREFETCH in the directory digest cache - Introduce digest_cache_dir_prefetch() and do it between digest cache creation and initialization (to avoid lock inversion) - Avoid unnecessary length check in digest_list_parse_rpm() - Declare arrays of strings in tlv parser as static - Emit reset for parent directory on directory entry modification - Rename digest_cache_reset_owner() to digest_cache_reset_clear_owner() and digest_cache_reset_user() to digest_cache_clear_user() - Execute digest_cache_file_release() either if FMODE_WRITE or FMODE_CREATED are set in the file descriptor f_mode - Determine in digest_cache_verif_set() which gfp flag to use depending on verifier ID - Update selftests v3: - Rewrite documentation, and remove the installation instructions since they are now included in the README of digest-cache-tools - Add digest cache event notifier - Drop digest_cache_was_reset(), and send instead to asynchronous notifications - Fix digest_cache LSM Kconfig style issues (suggested by Randy Dunlap) - Propagate digest cache reset to directory entries - Destroy per directory entry mutex - Introduce RESET_USER bit, to clear the dig_user pointer on set/removexattr - Replace 'file content' with 'file data' (suggested by Mimi) - Introduce per digest cache mutex and replace verif_data_lock spinlock - Track changes of security.digest_list xattr - Stop tracking file_open and use file_release instead also for file writes - Add error messages in digest_cache_create() - Load/unload testing kernel module automatically during execution of test - Add tests for digest cache event notifier - Add test for ftruncate() - Remove DIGEST_CACHE_RESET_PREFETCH_BUF command in test and clear the buffer on read instead v2: - Include the TLV parser in this patch set (from user asymmetric keys and signatures) - Move from IMA and make an independent LSM - Remove IMA-specific stuff from this patch set - Add per algorithm hash table - Expect all digest lists to be in the same directory and allow changing the default directory - Support digest lookup on directories, when there is no security.digest_list xattr - Add seq num to digest list file name, to impose ordering on directory iteration - Add a new data type DIGEST_LIST_ENTRY_DATA for the nested data in the tlv digest list format - Add the concept of verification data attached to digest caches - Add the reset mechanism to track changes on digest lists and directory containing the digest lists - Add kernel selftests v1: - Add documentation in Documentation/security/integrity-digest-cache.rst - Pass the mask of IMA actions to digest_cache_alloc() - Add a reference count to the digest cache - Remove the path parameter from digest_cache_get(), and rely on the reference count to avoid the digest cache disappearing while being used - Rename the dentry_to_check parameter of digest_cache_get() to dentry - Rename digest_cache_get() to digest_cache_new() and add digest_cache_get() to set the digest cache in the iint of the inode for which the digest cache was requested - Add dig_owner and dig_user to the iint, to distinguish from which inode the digest cache was created from, and which is using it; consequently it makes the digest cache usable to measure/appraise other digest caches (support not yet enabled) - Add dig_owner_mutex and dig_user_mutex to serialize accesses to dig_owner and dig_user until they are initialized - Enforce strong synchronization and make the contenders wait until dig_owner and dig_user are assigned to the iint the first time - Move checking IMA actions on the digest list earlier, and fail if no action were performed (digest cache not usable) - Remove digest_cache_put(), not needed anymore with the introduction of the reference count - Fail immediately in digest_cache_lookup() if the digest algorithm is not set in the digest cache - Use 64 bit mask for IMA actions on the digest list instead of 8 bit - Return NULL in the inline version of digest_cache_get() - Use list_add_tail() instead of list_add() in the iterator - Copy the digest list path to a separate buffer in digest_cache_iter_dir() - Use digest list parsers verified with Frama-C - Explicitly disable (for now) the possibility in the IMA policy to use the digest cache to measure/appraise other digest lists - Replace exit(<value>) with return <value> in manage_digest_lists.c Roberto Sassu (15): lib: Add TLV parser module: Introduce ksys_finit_module() integrity: Introduce the Integrity Digest Cache digest_cache: Initialize digest caches digest_cache: Add securityfs interface digest_cache: Add hash tables and operations digest_cache: Allow registration of digest list parsers digest_cache: Parse tlv digest lists digest_cache: Populate the digest cache from a digest list digest_cache: Add management of verification data digest_cache: Add support for directories digest cache: Prefetch digest lists if requested digest_cache: Reset digest cache on file/directory change selftests/digest_cache: Add selftests for the Integrity Digest Cache docs: Add documentation of the Integrity Digest Cache Documentation/security/digest_cache.rst | 850 ++++++++++++++++++ Documentation/security/index.rst | 1 + MAINTAINERS | 10 + include/linux/digest_cache.h | 131 +++ include/linux/kernel_read_file.h | 1 + include/linux/syscalls.h | 10 + include/linux/tlv_parser.h | 32 + include/uapi/linux/tlv_digest_list.h | 47 + include/uapi/linux/tlv_parser.h | 41 + include/uapi/linux/xattr.h | 6 + kernel/module/main.c | 43 +- lib/Kconfig | 3 + lib/Makefile | 2 + lib/tlv_parser.c | 87 ++ lib/tlv_parser.h | 18 + security/integrity/Kconfig | 1 + security/integrity/Makefile | 1 + security/integrity/digest_cache/Kconfig | 43 + security/integrity/digest_cache/Makefile | 11 + security/integrity/digest_cache/dir.c | 400 +++++++++ security/integrity/digest_cache/htable.c | 260 ++++++ security/integrity/digest_cache/internal.h | 283 ++++++ security/integrity/digest_cache/main.c | 597 ++++++++++++ security/integrity/digest_cache/modsig.c | 66 ++ security/integrity/digest_cache/parsers.c | 257 ++++++ security/integrity/digest_cache/parsers/tlv.c | 341 +++++++ security/integrity/digest_cache/populate.c | 104 +++ security/integrity/digest_cache/reset.c | 227 +++++ security/integrity/digest_cache/secfs.c | 104 +++ security/integrity/digest_cache/verif.c | 135 +++ security/integrity/ima/ima.h | 1 + security/integrity/ima/ima_fs.c | 6 + security/integrity/ima/ima_main.c | 10 +- tools/testing/selftests/Makefile | 1 + .../testing/selftests/digest_cache/.gitignore | 3 + tools/testing/selftests/digest_cache/Makefile | 24 + .../testing/selftests/digest_cache/all_test.c | 769 ++++++++++++++++ tools/testing/selftests/digest_cache/common.c | 78 ++ tools/testing/selftests/digest_cache/common.h | 93 ++ .../selftests/digest_cache/common_user.c | 33 + .../selftests/digest_cache/common_user.h | 15 + tools/testing/selftests/digest_cache/config | 2 + .../selftests/digest_cache/generators.c | 130 +++ .../selftests/digest_cache/generators.h | 16 + .../selftests/digest_cache/testmod/Makefile | 16 + .../selftests/digest_cache/testmod/kern.c | 551 ++++++++++++ 46 files changed, 5849 insertions(+), 11 deletions(-) create mode 100644 Documentation/security/digest_cache.rst create mode 100644 include/linux/digest_cache.h create mode 100644 include/linux/tlv_parser.h create mode 100644 include/uapi/linux/tlv_digest_list.h create mode 100644 include/uapi/linux/tlv_parser.h create mode 100644 lib/tlv_parser.c create mode 100644 lib/tlv_parser.h create mode 100644 security/integrity/digest_cache/Kconfig create mode 100644 security/integrity/digest_cache/Makefile create mode 100644 security/integrity/digest_cache/dir.c create mode 100644 security/integrity/digest_cache/htable.c create mode 100644 security/integrity/digest_cache/internal.h create mode 100644 security/integrity/digest_cache/main.c create mode 100644 security/integrity/digest_cache/modsig.c create mode 100644 security/integrity/digest_cache/parsers.c create mode 100644 security/integrity/digest_cache/parsers/tlv.c create mode 100644 security/integrity/digest_cache/populate.c create mode 100644 security/integrity/digest_cache/reset.c create mode 100644 security/integrity/digest_cache/secfs.c create mode 100644 security/integrity/digest_cache/verif.c create mode 100644 tools/testing/selftests/digest_cache/.gitignore create mode 100644 tools/testing/selftests/digest_cache/Makefile create mode 100644 tools/testing/selftests/digest_cache/all_test.c create mode 100644 tools/testing/selftests/digest_cache/common.c create mode 100644 tools/testing/selftests/digest_cache/common.h create mode 100644 tools/testing/selftests/digest_cache/common_user.c create mode 100644 tools/testing/selftests/digest_cache/common_user.h create mode 100644 tools/testing/selftests/digest_cache/config create mode 100644 tools/testing/selftests/digest_cache/generators.c create mode 100644 tools/testing/selftests/digest_cache/generators.h create mode 100644 tools/testing/selftests/digest_cache/testmod/Makefile create mode 100644 tools/testing/selftests/digest_cache/testmod/kern.c -- 2.47.0.118.gfd3785337b

2 weeks, 1 day

6
47
0 0

[PATCH net-next 0/4] netconsole: selftest for userdata overflow

by Breno Leitao

Implement comprehensive testing for netconsole userdata entry handling, demonstrating correct behavior when creating maximum entries and preventing unauthorized overflow. Refactor existing test infrastructure to support modular, reusable helper functions that validate strict entry limit enforcement. Also, add a warning if update_userdata() sees more than MAX_USERDATA_ITEMS entries. This shouldn't happen and it is a bug that shouldn't be silently ignored. Signed-off-by: Breno Leitao <leitao(a)debian.org> --- Breno Leitao (4): netconsole: Warn if MAX_USERDATA_ITEMS limit is exceeded netconsole: selftest: Split the helpers from the selftest netconsole: selftest: Delete all userdata keys netconsole: selftest: verify userdata entry limit MAINTAINERS | 3 +- drivers/net/netconsole.c | 2 +- .../selftests/drivers/net/lib/sh/lib_netcons.sh | 225 +++++++++++++++++++++ .../testing/selftests/drivers/net/netcons_basic.sh | 218 +------------------- .../selftests/drivers/net/netcons_overflow.sh | 67 ++++++ 5 files changed, 296 insertions(+), 219 deletions(-) --- base-commit: bb18265c3aba92b91a1355609769f3e967b65dee change-id: 20241204-netcons_overflow_test-eaf735d1f743 Best regards, -- Breno Leitao <leitao(a)debian.org>

2 weeks, 1 day

2
8
0 0

[PATCH net-next v2 08/10] mm: page_frag: add testing for the newly added API

by Yunsheng Lin

Add testing for the newly added prepare API, for both aligned and non-aligned API, also probe API is also tested along with prepare API. CC: Alexander Duyck <alexander.duyck(a)gmail.com> CC: Andrew Morton <akpm(a)linux-foundation.org> CC: Linux-MM <linux-mm(a)kvack.org> Signed-off-by: Yunsheng Lin <linyunsheng(a)huawei.com> --- .../selftests/mm/page_frag/page_frag_test.c | 76 +++++++++++++++++-- tools/testing/selftests/mm/run_vmtests.sh | 4 + tools/testing/selftests/mm/test_page_frag.sh | 27 +++++++ 3 files changed, 102 insertions(+), 5 deletions(-) diff --git a/tools/testing/selftests/mm/page_frag/page_frag_test.c b/tools/testing/selftests/mm/page_frag/page_frag_test.c index e806c1866e36..3b3c32389def 100644 --- a/tools/testing/selftests/mm/page_frag/page_frag_test.c +++ b/tools/testing/selftests/mm/page_frag/page_frag_test.c @@ -32,6 +32,10 @@ static bool test_align; module_param(test_align, bool, 0); MODULE_PARM_DESC(test_align, "use align API for testing"); +static bool test_prepare; +module_param(test_prepare, bool, 0); +MODULE_PARM_DESC(test_prepare, "use prepare API for testing"); + static int test_alloc_len = 2048; module_param(test_alloc_len, int, 0); MODULE_PARM_DESC(test_alloc_len, "alloc len for testing"); @@ -74,6 +78,21 @@ static int page_frag_pop_thread(void *arg) return 0; } +static void frag_frag_test_commit(struct page_frag_cache *nc, + struct page_frag *prepare_pfrag, + struct page_frag *probe_pfrag, + unsigned int used_sz) +{ + if (prepare_pfrag->page != probe_pfrag->page || + prepare_pfrag->offset != probe_pfrag->offset || + prepare_pfrag->size != probe_pfrag->size) { + force_exit = true; + WARN_ONCE(true, TEST_FAILED_PREFIX "wrong probed info\n"); + } + + page_frag_refill_commit(nc, prepare_pfrag, used_sz); +} + static int page_frag_push_thread(void *arg) { struct ptr_ring *ring = arg; @@ -86,15 +105,61 @@ static int page_frag_push_thread(void *arg) int ret; if (test_align) { - va = page_frag_alloc_align(&test_nc, test_alloc_len, - GFP_KERNEL, SMP_CACHE_BYTES); + if (test_prepare) { + struct page_frag prepare_frag, probe_frag; + void *probe_va; + + va = page_frag_alloc_refill_prepare_align(&test_nc, + test_alloc_len, + &prepare_frag, + GFP_KERNEL, + SMP_CACHE_BYTES); + + probe_va = __page_frag_alloc_refill_probe_align(&test_nc, + test_alloc_len, + &probe_frag, + -SMP_CACHE_BYTES); + if (va != probe_va) { + force_exit = true; + WARN_ONCE(true, TEST_FAILED_PREFIX "wrong va\n"); + } + + if (likely(va)) + frag_frag_test_commit(&test_nc, &prepare_frag, + &probe_frag, test_alloc_len); + } else { + va = page_frag_alloc_align(&test_nc, + test_alloc_len, + GFP_KERNEL, + SMP_CACHE_BYTES); + } if ((unsigned long)va & (SMP_CACHE_BYTES - 1)) { force_exit = true; WARN_ONCE(true, TEST_FAILED_PREFIX "unaligned va returned\n"); } } else { - va = page_frag_alloc(&test_nc, test_alloc_len, GFP_KERNEL); + if (test_prepare) { + struct page_frag prepare_frag, probe_frag; + void *probe_va; + + va = page_frag_alloc_refill_prepare(&test_nc, test_alloc_len, + &prepare_frag, GFP_KERNEL); + + probe_va = page_frag_alloc_refill_probe(&test_nc, test_alloc_len, + &probe_frag); + + if (va != probe_va) { + force_exit = true; + WARN_ONCE(true, TEST_FAILED_PREFIX "wrong va\n"); + } + + if (likely(va)) + frag_frag_test_commit(&test_nc, &prepare_frag, + &probe_frag, test_alloc_len); + } else { + va = page_frag_alloc(&test_nc, test_alloc_len, GFP_KERNEL); + } } if (!va) @@ -176,8 +241,9 @@ static int __init page_frag_test_init(void) } duration = (u64)ktime_us_delta(ktime_get(), start); - pr_info("%d of iterations for %s testing took: %lluus\n", nr_test, - test_align ? "aligned" : "non-aligned", duration); + pr_info("%d of iterations for %s %s API testing took: %lluus\n", nr_test, + test_align ? "aligned" : "non-aligned", + test_prepare ? "prepare" : "alloc", duration); out: ptr_ring_cleanup(&ptr_ring, NULL); diff --git a/tools/testing/selftests/mm/run_vmtests.sh b/tools/testing/selftests/mm/run_vmtests.sh index 2fc290d9430c..881c17803baf 100755 --- a/tools/testing/selftests/mm/run_vmtests.sh +++ b/tools/testing/selftests/mm/run_vmtests.sh @@ -466,6 +466,10 @@ CATEGORY="page_frag" run_test ./test_page_frag.sh aligned CATEGORY="page_frag" run_test ./test_page_frag.sh nonaligned +CATEGORY="page_frag" run_test ./test_page_frag.sh aligned_prepare + +CATEGORY="page_frag" run_test ./test_page_frag.sh nonaligned_prepare + echo "SUMMARY: PASS=${count_pass} SKIP=${count_skip} FAIL=${count_fail}" | tap_prefix echo "1..${count_total}" | tap_output diff --git a/tools/testing/selftests/mm/test_page_frag.sh b/tools/testing/selftests/mm/test_page_frag.sh index f55b105084cf..1c757fd11844 100755 --- a/tools/testing/selftests/mm/test_page_frag.sh +++ b/tools/testing/selftests/mm/test_page_frag.sh @@ -43,6 +43,8 @@ check_test_failed_prefix() { SMOKE_PARAM="test_push_cpu=$TEST_CPU_0 test_pop_cpu=$TEST_CPU_1" NONALIGNED_PARAM="$SMOKE_PARAM test_alloc_len=75 nr_test=$NR_TEST" ALIGNED_PARAM="$NONALIGNED_PARAM test_align=1" +NONALIGNED_PREPARE_PARAM="$NONALIGNED_PARAM test_prepare=1" +ALIGNED_PREPARE_PARAM="$ALIGNED_PARAM test_prepare=1" check_test_requirements() { @@ -77,6 +79,20 @@ run_aligned_check() insmod $DRIVER $ALIGNED_PARAM > /dev/null 2>&1 } +run_nonaligned_prepare_check() +{ + echo "Run performance tests to evaluate how fast nonaligned prepare API is." + + insmod $DRIVER $NONALIGNED_PREPARE_PARAM > /dev/null 2>&1 +} + +run_aligned_prepare_check() +{ + echo "Run performance tests to evaluate how fast aligned prepare API is." + + insmod $DRIVER $ALIGNED_PREPARE_PARAM > /dev/null 2>&1 +} + run_smoke_check() { echo "Run smoke test." @@ -87,6 +103,7 @@ run_smoke_check() usage() { echo -n "Usage: $0 [ aligned ] | [ nonaligned ] | | [ smoke ] | " + echo "[ aligned_prepare ] | [ nonaligned_prepare ] | " echo "manual parameters" echo echo "Valid tests and parameters:" @@ -107,6 +124,12 @@ usage() echo "# Performance testing for aligned alloc API" echo "$0 aligned" echo + echo "# Performance testing for nonaligned prepare API" + echo "$0 nonaligned_prepare" + echo + echo "# Performance testing for aligned prepare API" + echo "$0 aligned_prepare" + echo exit 0 } @@ -158,6 +181,10 @@ function run_test() run_nonaligned_check elif [[ "$1" = "aligned" ]]; then run_aligned_check + elif [[ "$1" = "nonaligned_prepare" ]]; then + run_nonaligned_prepare_check + elif [[ "$1" = "aligned_prepare" ]]; then + run_aligned_prepare_check else run_manual_check $@ fi -- 2.33.0

2 weeks, 2 days

1
0
0 0

[PATCH net-next v2 11/11] selftests: forwarding: Add a selftest for the new reserved_bits UAPI

by Petr Machata

Run VXLAN packets through a gateway. Flip individual bits of the packet and/or reserved bits of the gateway, and check that the gateway treats the packets as expected. Signed-off-by: Petr Machata <petrm(a)nvidia.com> Reviewed-by: Ido Schimmel <idosch(a)nvidia.com> --- Notes: v2: - Add the new test to Makefile CC: Shuah Khan <shuah(a)kernel.org> CC: Benjamin Poirier <bpoirier(a)nvidia.com> CC: Hangbin Liu <liuhangbin(a)gmail.com> CC: Vladimir Oltean <vladimir.oltean(a)nxp.com> CC: linux-kselftest(a)vger.kernel.org .../testing/selftests/net/forwarding/Makefile | 1 + .../net/forwarding/vxlan_reserved.sh | 352 ++++++++++++++++++ 2 files changed, 353 insertions(+) create mode 100755 tools/testing/selftests/net/forwarding/vxlan_reserved.sh diff --git a/tools/testing/selftests/net/forwarding/Makefile b/tools/testing/selftests/net/forwarding/Makefile index 7d885cff8d79..00bde7b6f39e 100644 --- a/tools/testing/selftests/net/forwarding/Makefile +++ b/tools/testing/selftests/net/forwarding/Makefile @@ -105,6 +105,7 @@ TEST_PROGS = bridge_fdb_learning_limit.sh \ vxlan_bridge_1q_port_8472_ipv6.sh \ vxlan_bridge_1q_port_8472.sh \ vxlan_bridge_1q.sh \ + vxlan_reserved.sh \ vxlan_symmetric_ipv6.sh \ vxlan_symmetric.sh diff --git a/tools/testing/selftests/net/forwarding/vxlan_reserved.sh b/tools/testing/selftests/net/forwarding/vxlan_reserved.sh new file mode 100755 index 000000000000..46c31794b91b --- /dev/null +++ b/tools/testing/selftests/net/forwarding/vxlan_reserved.sh @@ -0,0 +1,352 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# +--------------------+ +# | H1 (vrf) | +# | + $h1 | +# | | 192.0.2.1/28 | +# +----|---------------+ +# | +# +----|--------------------------------+ +# | SW | | +# | +--|------------------------------+ | +# | | + $swp1 BR1 (802.1d) | | +# | | | | +# | | + vx1 (vxlan) | | +# | | local 192.0.2.17 | | +# | | id 1000 dstport $VXPORT | | +# | +---------------------------------+ | +# | | +# | 192.0.2.32/28 via 192.0.2.18 | +# | | +# | + $rp1 | +# | | 192.0.2.17/28 | +# +--|----------------------------------+ +# | +# +--|----------------------------------+ +# | | | +# | + $rp2 | +# | 192.0.2.18/28 | +# | | +# | VRP2 (vrf) | +# +-------------------------------------+ + +: ${VXPORT:=4789} +: ${ALL_TESTS:=" + default_test + plain_test + reserved_0_test + reserved_10_test + reserved_31_test + reserved_56_test + reserved_63_test + "} + +NUM_NETIFS=4 +source lib.sh + +h1_create() +{ + simple_if_init $h1 192.0.2.1/28 + defer simple_if_fini $h1 192.0.2.1/28 + + tc qdisc add dev $h1 clsact + defer tc qdisc del dev $h1 clsact + + tc filter add dev $h1 ingress pref 77 \ + prot ip flower skip_hw ip_proto icmp action drop + defer tc filter del dev $h1 ingress pref 77 +} + +switch_create() +{ + ip_link_add br1 type bridge vlan_filtering 0 mcast_snooping 0 + # Make sure the bridge uses the MAC address of the local port and not + # that of the VxLAN's device. + ip_link_set_addr br1 $(mac_get $swp1) + ip_link_set_up br1 + + ip_link_set_up $rp1 + ip_addr_add $rp1 192.0.2.17/28 + ip_route_add 192.0.2.32/28 nexthop via 192.0.2.18 + + ip_link_set_master $swp1 br1 + ip_link_set_up $swp1 +} + +vrp2_create() +{ + simple_if_init $rp2 192.0.2.18/28 + defer simple_if_fini $rp2 192.0.2.18/28 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + rp1=${NETIFS[p3]} + rp2=${NETIFS[p4]} + + vrf_prepare + defer vrf_cleanup + + forwarding_enable + defer forwarding_restore + + h1_create + switch_create + + vrp2_create +} + +vxlan_header_bytes() +{ + local vni=$1; shift + local -a extra_bits=("$@") + local -a bits + local i + + for ((i=0; i < 64; i++)); do + bits[i]=0 + done + + # Bit 4 is the I flag and is always on. + bits[4]=1 + + for i in ${extra_bits[@]}; do + bits[i]=1 + done + + # Bits 32..55 carry the VNI + local mask=0x800000 + for ((i=0; i < 24; i++)); do + bits[$((i + 32))]=$(((vni & mask) != 0)) + ((mask >>= 1)) + done + + local bytes + for ((i=0; i < 8; i++)); do + local byte=0 + local j + for ((j=0; j < 8; j++)); do + local bit=${bits[8 * i + j]} + ((byte += bit << (7 - j))) + done + bytes+=$(printf %02x $byte): + done + + echo ${bytes%:} +} + +neg_bytes() +{ + local bytes=$1; shift + + local -A neg=([0]=f [1]=e [2]=d [3]=c [4]=b [5]=a [6]=9 [7]=8 + [8]=7 [9]=6 [a]=5 [b]=4 [c]=3 [d]=2 [e]=1 [f]=0 [:]=:) + local out + local i + + for ((i=0; i < ${#bytes}; i++)); do + local c=${bytes:$i:1} + out+=${neg[$c]} + done + echo $out +} + +vxlan_ping_do() +{ + local count=$1; shift + local dev=$1; shift + local next_hop_mac=$1; shift + local dest_ip=$1; shift + local dest_mac=$1; shift + local vni=$1; shift + local reserved_bits=$1; shift + + local vxlan_header=$(vxlan_header_bytes $vni $reserved_bits) + + $MZ $dev -c $count -d 100msec -q \ + -b $next_hop_mac -B $dest_ip \ + -t udp sp=23456,dp=$VXPORT,p=$(: + )"$vxlan_header:"$( : VXLAN + )"$dest_mac:"$( : ETH daddr + )"00:11:22:33:44:55:"$( : ETH saddr + )"08:00:"$( : ETH type + )"45:"$( : IP version + IHL + )"00:"$( : IP TOS + )"00:54:"$( : IP total length + )"99:83:"$( : IP identification + )"40:00:"$( : IP flags + frag off + )"40:"$( : IP TTL + )"01:"$( : IP proto + )"00:00:"$( : IP header csum + )"$(ipv4_to_bytes 192.0.2.3):"$( : IP saddr + )"$(ipv4_to_bytes 192.0.2.1):"$( : IP daddr + )"08:"$( : ICMP type + )"00:"$( : ICMP code + )"8b:f2:"$( : ICMP csum + )"1f:6a:"$( : ICMP request identifier + )"00:01:"$( : ICMP request seq. number + )"4f:ff:c5:5b:00:00:00:00:"$( : ICMP payload + )"6d:74:0b:00:00:00:00:00:"$( : + )"10:11:12:13:14:15:16:17:"$( : + )"18:19:1a:1b:1c:1d:1e:1f:"$( : + )"20:21:22:23:24:25:26:27:"$( : + )"28:29:2a:2b:2c:2d:2e:2f:"$( : + )"30:31:32:33:34:35:36:37" +} + +vxlan_device_add() +{ + ip_link_add vx1 up type vxlan id 1000 \ + local 192.0.2.17 dstport "$VXPORT" \ + nolearning noudpcsum tos inherit ttl 100 "$@" + ip_link_set_master vx1 br1 +} + +vxlan_all_reserved_bits() +{ + local i + + for ((i=0; i < 64; i++)); do + if ((i == 4 || i >= 32 && i < 56)); then + continue + fi + echo $i + done +} + +vxlan_ping_vanilla() +{ + vxlan_ping_do 10 $rp2 $(mac_get $rp1) 192.0.2.17 $(mac_get $h1) 1000 +} + +vxlan_ping_reserved() +{ + for bit in $(vxlan_all_reserved_bits); do + vxlan_ping_do 1 $rp2 $(mac_get $rp1) \ + 192.0.2.17 $(mac_get $h1) 1000 "$bit" + ((n++)) + done +} + +vxlan_ping_test() +{ + local what=$1; shift + local get_stat=$1; shift + local expect=$1; shift + + RET=0 + + local t0=$($get_stat) + + "$@" + check_err $? "Failure when running $@" + + local t1=$($get_stat) + local delta=$((t1 - t0)) + + ((expect == delta)) + check_err $? "Expected to capture $expect packets, got $delta." + + log_test "$what" +} + +__default_test_do() +{ + local n_allowed_bits=$1; shift + local what=$1; shift + + vxlan_ping_test "$what: clean packets" \ + "tc_rule_stats_get $h1 77 ingress" \ + 10 vxlan_ping_vanilla + + local t0=$(link_stats_get vx1 rx errors) + vxlan_ping_test "$what: mangled packets" \ + "tc_rule_stats_get $h1 77 ingress" \ + $n_allowed_bits vxlan_ping_reserved + local t1=$(link_stats_get vx1 rx errors) + + RET=0 + local expect=$((39 - n_allowed_bits)) + local delta=$((t1 - t0)) + ((expect == delta)) + check_err $? "Expected $expect error packets, got $delta." + log_test "$what: drops reported" +} + +default_test_do() +{ + vxlan_device_add + __default_test_do 0 "Default" +} + +default_test() +{ + in_defer_scope \ + default_test_do +} + +plain_test_do() +{ + vxlan_device_add reserved_bits 0xf7ffffff000000ff + __default_test_do 0 "reserved_bits 0xf7ffffff000000ff" +} + +plain_test() +{ + in_defer_scope \ + plain_test_do +} + +reserved_test() +{ + local bit=$1; shift + + local allowed_bytes=$(vxlan_header_bytes 0xffffff $bit) + local reserved_bytes=$(neg_bytes $allowed_bytes) + local reserved_bits=${reserved_bytes//:/} + + vxlan_device_add reserved_bits 0x$reserved_bits + __default_test_do 1 "reserved_bits 0x$reserved_bits" +} + +reserved_0_test() +{ + in_defer_scope \ + reserved_test 0 +} + +reserved_10_test() +{ + in_defer_scope \ + reserved_test 10 +} + +reserved_31_test() +{ + in_defer_scope \ + reserved_test 31 +} + +reserved_56_test() +{ + in_defer_scope \ + reserved_test 56 +} + +reserved_63_test() +{ + in_defer_scope \ + reserved_test 63 +} + +trap cleanup EXIT + +setup_prepare +setup_wait +tests_run + +exit $EXIT_STATUS -- 2.47.0

2 weeks, 2 days

2
1
0 0

[PATCH net-next v2 10/11] selftests: net: lib: Add several autodefer helpers

by Petr Machata

Add ip_link_set_addr(), ip_link_set_up(), ip_addr_add() and ip_route_add() to the suite of helpers that automatically schedule a corresponding cleanup. When setting a new MAC, one needs to remember the old address first. Move mac_get() from forwarding/ to that end. Signed-off-by: Petr Machata <petrm(a)nvidia.com> Reviewed-by: Ido Schimmel <idosch(a)nvidia.com> --- Notes: CC: Shuah Khan <shuah(a)kernel.org> CC: Benjamin Poirier <bpoirier(a)nvidia.com> CC: Hangbin Liu <liuhangbin(a)gmail.com> CC: Vladimir Oltean <vladimir.oltean(a)nxp.com> CC: linux-kselftest(a)vger.kernel.org tools/testing/selftests/net/forwarding/lib.sh | 7 ---- tools/testing/selftests/net/lib.sh | 39 +++++++++++++++++++ 2 files changed, 39 insertions(+), 7 deletions(-) diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh index 7337f398f9cc..1fd40bada694 100644 --- a/tools/testing/selftests/net/forwarding/lib.sh +++ b/tools/testing/selftests/net/forwarding/lib.sh @@ -932,13 +932,6 @@ packets_rate() echo $(((t1 - t0) / interval)) } -mac_get() -{ - local if_name=$1 - - ip -j link show dev $if_name | jq -r '.[]["address"]' -} - ether_addr_to_u64() { local addr="$1" diff --git a/tools/testing/selftests/net/lib.sh b/tools/testing/selftests/net/lib.sh index 5ea6537acd2b..2cd5c743b2d9 100644 --- a/tools/testing/selftests/net/lib.sh +++ b/tools/testing/selftests/net/lib.sh @@ -435,6 +435,13 @@ xfail_on_veth() fi } +mac_get() +{ + local if_name=$1 + + ip -j link show dev $if_name | jq -r '.[]["address"]' +} + kill_process() { local pid=$1; shift @@ -459,3 +466,35 @@ ip_link_set_master() ip link set dev "$member" master "$master" defer ip link set dev "$member" nomaster } + +ip_link_set_addr() +{ + local name=$1; shift + local addr=$1; shift + + local old_addr=$(mac_get "$name") + ip link set dev "$name" address "$addr" + defer ip link set dev "$name" address "$old_addr" +} + +ip_link_set_up() +{ + local name=$1; shift + + ip link set dev "$name" up + defer ip link set dev "$name" down +} + +ip_addr_add() +{ + local name=$1; shift + + ip addr add dev "$name" "$@" + defer ip addr del dev "$name" "$@" +} + +ip_route_add() +{ + ip route add "$@" + defer ip route del "$@" +} -- 2.47.0

2 weeks, 2 days

2
1
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror December 2024